What can be made from wood. Wooden crafts for the garden (51 photos): buildings, paths, fences and supporting walls, decorative bridges. Flower bed, furniture and playground decoration. DIY wooden crafts using carved

Outwardly, it will practically not differ from a living tree. But the advantages and advantages of an artificial tree are immeasurably greater: it does not need to be grown for many years, it does not require watering and special care.

You can decorate such bonsai in places far from the lighting in the room. The most important thing is that this pleasure is not worth the crazy.

Start creating a man-made masterpiece by finding a suitable driftwood or. They can be found in the forest or in. Do not pay attention to the fact that the snag with small defects, they can be eliminated in the process of making artificial wood. So, we have selected the material for the bonsai trunk.

You should also save green branches of coniferous trees. Suitable pine, juniper, spruce. Not to do in our creativity and without a moss. Reindeer moss is best. Now that the material for the tree has been selected, you can proceed to the conservation stage. Preservation is necessary so that the needles do not crumble when dried, but remain in their original form for several years. Preservation, in addition, will help preserve the bright green color of the needles.

For chemical preservation, it is necessary to prepare a solution of denatured alcohol, acetone and glycerin in a ratio of 1:1:2. The solution must be stored in a tightly closed jar, since it has a strong.

Thoroughly rinse the plant branches you have collected in water to clean them of dirt. Then place them in the solution for at least a week. The branches should be completely covered with the solution, and not float on its surface. At the end of the treatment, the plants should be washed in water. Keep in mind that with such a chemical treatment, not only conservation, but also bleaching of plants occurs. In the future, the branches are to be painted.

Processed and washed branches should be hung on the balcony (or in the attic) and dried for at least a week. Glycerin makes plant branches elastic and prevents shedding of needles. Dried branches can be dyed.

Use oil paints, diluting them with drying oil, turpentine or acetone. It is more convenient to process needles with a brush or a spray bottle. So that the paint lays down evenly, first dip the branches in hot paraffin. The paint should only be applied to the needles.

In addition to branches, driftwood and dried moss, we also need glue and wire. Mounting bonsai requires some skill and patience. As a result, we should get a composition that is as similar as possible to a living tree.

Cut the branches to length and glue them to the tree trunk, the role of which will be played by a snag. Use wire for fastening. Later, when the glue dries, it will need to be removed. Places that have been treated should be decorated with moss. When installing your artificial tree, keep in mind that the center of gravity of the composition should allow it to be stable in its place.

If you were careful and patient, then soon your eyes will see a composition that is very similar to a living tree, capable of maintaining its shape for several years. You will only have to blow dust from your creation from time to time.

Artificial trees will create beauty and comfort in your home.

When planning a design in a house, it is impossible to do without original little things. It is unusual crafts that bring a special charm, emphasizing any style, design theme. Artificial trees are luxurious decorative elements, the role of which in the interior is difficult to overestimate.

In addition to a subtle eco-friendly note, they are a good alternative to living plants, they do not require reverent care, the creation of a microclimate and special conditions. There are many ways to make artificial trees with your own hands: bonsai, topiary, as well as many other creative ideas. Stylish hand-made crafts will help not only make the interior of the rooms more comfortable, but also bring fresh, informal notes to the design of a strict institution or office.

Advantages of ornamental trees

In the old days, people said that a craftsman and a needleworker brings joy to himself and people. Unique handmade items are always a valuable and welcome gift. Ornamental tree making is a special art that keeps vibrant gardens in full bloom all year round. Designing unusual crafts has a lot of advantages:

• With the help of original details, you can breathe new life into your home interior, refresh it without any special financial costs.
• Artificial trees will retain their original beauty for a long time without requiring special care. They do not depend on weather conditions, please the eye with their beauty.
• Decorative details will help to harmoniously complement the stylish modern design even in a strict office space.

Decorative trees will breathe new life into the home interior

Looking at the skillful ornamental plants presented in stores, it's hard to believe that they can be made by hand. Do not rush to spend money on copyright crafts. We will reveal the secrets and secrets of this work, we will offer several original ideas, as well as simple master classes, during which you can “grow” many marvelous trees with your own hands.

Create a bonsai

The tradition of creating bonsai originated in ancient China over two thousand years ago. The name "bonsai" is written in two hieroglyphs that mean "bowl" and "tree". Later, already in Japan, the unusual method was actively developed, ascended to the rank of fine art. It was the Japanese who brought the method to perfection, creating a special system of canons, proposing the rules of exposure. Miniature trees are an aesthetic delight for perfectionist people. Many argue that looking at an elegant bonsai, they are seized by an extraordinary sense of calm, peace, anxiety goes away, as if by magic. Decorate the world around you, try your hand at creating amazingly beautiful products.

Varieties of bonsai

Bonsai

Do you want to create a luxurious garden in miniature at home that does not require special care? Then an interesting master class will help beginners in creating a bonsai tree with their own hands. Step-by-step instruction:

1. We select materials for work. Any gifts of a generous nature will be required: intricately curved twigs, snags, branches of juniper, spruce or pine, moss, reindeer moss.
2. Canning branches. For processing, we will prepare a special solution consisting of denatured alcohol, acetone, glycerin. We take everything in the exact proportion of 1: 1: 2.

Important: The solution for the preservation of natural materials should be stored in a tightly closed container, as it has a pronounced chemical odor.

Initially, we wash the branches under cold water, carefully cleaning them of dust and dirt, then we place them in the solution for a period of at least a week.

1. Next, the decorative material is dried, if necessary, painted. Let's reveal a little secret: before painting, you need to dip the branches in hot paraffin, processing will help to evenly apply paint to the surface.
2. Let's start making a decorative bonsai tree. We cut the branches to the desired length, carefully glue each to the base. So that the structure does not crumble, we fasten the individual elements with wire, after gluing it can be removed.
3. We decorate separate sections with moss, reindeer moss, white sand or decorative pebbles. In the work, we will definitely designate the center of gravity of the structure in order to give the craft greater stability.

Creating a bonsai tree with your own hands

After the end of the painstaking work, a unique live composition will open up to your eyes. An eco-style bonsai will please the eye for a long time, it remains only to occasionally brush off the dust from an elegant creation.

Bonsai in a pot

We offer another way of how easy it is to make an artificial bonsai tree with your own hands. The algorithm of work is simple:

• Selecting a container. Ideal ceramic flower pot with holes for draining water.
• Fill the pot with soil. Land should not be collected in the yard. It is better not to save money and buy a ready-made mixture in a flower shop. What is it for, if the tree is still artificial? From above, we will grow moss or lawn, so good soil is necessary.
• For the trunk of an ornamental tree, we select a twig, thick enough, intricately curved to resemble a sprawling plant.
• We attach decor to the branches of a wooden frame. It can be made from matte paper, fabric, satin ribbons, or any material. The more original the decor, the more spectacular the end result.
• We plant a lawn mixture in the ground, water it abundantly daily. It will take quite a bit of time, and under the original tree a bright and juicy lawn will spread like a summer.

original decorative tree

By combining natural and synthetic materials, you can achieve unprecedented results in the art of bonsai, turning your favorite hobby into a successful business.

Many-faced topiary

The art of topiary is no less ancient, its origins go back centuries, when people came up with the idea of ​​“playing” with nature, giving shrubs and trees in gardens a variety of forms. Modern topiary is a stylish solution for a budget, but exclusive interior design. Skillful craftswomen are constantly looking for new ideas for creating decorative trees. A large blooming garden made by one's own hands is a wonderful gift not only for oneself, but also for relatives, friends, colleagues. Lovely presents are very symbolic. Using this or that decor, you can create amazing things with your own hands.

Bright flower topiary - will be a great gift

Fragrant big baobab

Coffee trees are a separate "fragrant" caste in the art of topiary. There are several variations on this theme, but we offer a lesson on how easy it is to make a big tree with your own hands. To work, you will need several small foam spheres, a package of coffee beans, thick linen yarn, a pot stand, glue, and scissors.

If you don’t have a ready-made base at hand, you can make it yourself using the papier-mâché method. Work algorithm:

• Let's prepare 7 small base balls, generously coat each of them with glue. We begin to fix the grains with the flat side down. We move arbitrarily, in a circle, horizontally, vertically. The main thing is that there are no gaps between the elements. When the first layer is dry, repeat the process, but with the flat side of the grains up.
• We make a trunk for a sprawling baobab. We take a strong, thick wire, we fasten sprigs of thin wire to it with adhesive tape. We bend beautifully, giving a bizarre shape to the plant.
• From above, we carefully wrap the branches and trunk with twine, making sure that each turn lies tightly to each other. So that the rope holds firmly and does not slip along a smooth trunk, we coat the wire with glue.
• We string coffee balls on the branches, lubricating the holes with superglue.
• In a pot, mix gypsum with water to the consistency of thick sour cream, insert a tree, let the mixture “grab”.

Important: For a topiary, it is necessary to choose a base ball of light weight so that a thin trunk holds the entire structure. A plastic hollow ball, Christmas tree toy is ideal.

Fragrant baobab do it yourself

When the gypsum has completely dried up, we decorate the stand. You can put coins, decorate with moss or use floral sisal. For a thick and rich aroma, decorate the tree with cinnamon sticks, stars of spicy star anise. The coffee tree is not only beautiful, but also symbolic: seven wonders of the world, seven days a week, seven colors of the rainbow - all this is not accidental! An original gift will surely attract good luck, family and financial well-being to the house.

A simple but beautiful craft can be made by a child from pistachio shells and wire.

original pistachio tree

Work algorithm:

1. In each pistachio shell we make a hole with a gypsy needle.
2. We cut a thin copper wire into several small segments, 15-20 centimeters long.
3. We string a shell on each branch, make a loop, twist it. We fasten small branches together, 3-5 pieces each. The more such blanks you make, the more magnificent the crown of the decorative tree will turn out.
4. We wind the branches alternately to the trunk, fixing them with construction tape or FUM tape.
5. In order to give the product magnificence and luxury, we will cover the entire surface with spray paint in gold or bronze color.
6. Let's prepare the base. Add a mixture of alabaster and water to the pot, carefully insert the tree, let the structure dry.
7. We will cover the alabaster with a layer of beautiful pebbles, golden beads or coins.

DIY pistachio tree

A beautiful souvenir will be a wonderful gift for all lovers of eclectic hand made products.To create your own large, ever-blooming garden, you only need imagination and a little skill. As Fyodor Mikhailovich Dostoevsky liked to say, fantasy is a natural force in every person, without giving it satisfaction, we do not allow it to grow and develop. Create, share your success, because the world of creativity is a bottomless ocean of creative ideas.

Many-faced topiary

Decorative trees made of artificial materials are ideal for decorating your home or office. They will perfectly fit into the design of any interior, creating a cozy atmosphere in the room. Such hand-made crafts do not require special conditions of maintenance and careful care compared to living plants. From this article you will learn how to make artificial trees with your own hands in different ways.

artificial pistachio tree

You will need:

• Gypsum;
• Pot;
• Pistachio shell;
• Spray paint gold;
• Wire.

How to make a tree with your own hands from pistachio shells:

• Using a drill, make a small hole in each shell;
• We cut the wire into segments 15-20 cm long and fix one shell for each of the segments. Next, we twist the wires and get blanks;

• We connect several leaves together by twisting the wire. Thus, a branch is obtained;
• We make several branches and twist them together - we get the trunk of a tree;

• We wrap the branches and the stem part with FUM tape. Instead, you can take a thread or rope;
• Let's paint the craft;

• Let's prepare the base: we will prepare a pot suitable for crafts, which we will fill with plaster and insert our “golden” masterpiece into it;
• Let's wait until the plaster dries. We paint the pot with paint;

• Additionally, we make out the finished craft with coins.

Similar ideas for hand-made crafts can be found in the article.

Master class on making decorative poplar

Such a beautiful "poplar" is a great decoration for a house or street.

Required materials:

• Candle;
• Glue;
• Needle;
• Matches;
• Thin and thick wire;
• Pot;
• Gypsum or cement;
• Gray and green threads;
• Green plastic bottle;
• Scissors.

Step by step master class with photo:

• We separate with wire cutters from a thick wire 3 segments that are identical to each other, connect to each other by twisting. We wrap the ends of the blanks on one side;
• We dilute the fixing mixture, pour the solution into the pot, put the “poplar” trunk with curved ends there. We are waiting for the mass to solidify, and at this time we are making artificial branches;
• We cut squares of different sizes from the bottle, cut out the leaves from them. We heat a needle over the flame, make holes in the upper part;

• Insert a thin wire into them, fold in half, twist. We combine three branches into one and make several identical blanks;
• Next, for the manufacture of crafts for the home interior, we take several blanks, which consist of three branches, and connect them together;

• We close the wire part with the help of gray threads, fix the ends with glue. We leave the lower part of the branch free, which we attach to the trunk;
• Using the same method, we make the entire “poplar”, we wrap its stem part with a gray thread;
• To imitate grass, cut green threads of the same size, fold them in half. Lubricate the bending points with glue, fasten the blanks to a cement or gypsum base.

Thus, we get beautiful artificial trees in pots that can safely stand both at home and on the street - they are not afraid of rain and bright sunlight.

artificial home apple tree

It is advisable to place such decorative artificial trees only indoors, because their flowers are made of yarn.

You will need:

• Glue;
• wire cutters;
• Cardboard;
• Hook;
• Scotch;
• Wire;
• Pencil;
• cement or plaster;
• Scissors;
• Brown and green fabric;
• Pot;
• Red and brown threads.

Stages of work:

• We cut off with wire cutters six wire blanks of 30 cm each, five - 25 cm each, and twenty-two - 4 cm each;
• We attach with tape to a large wire branch 3 small ones. Let's make some preparations. Branches can be wrapped with matter, for example, velvet or fleece;

• We cut strips 2 cm wide from brown fabric. We wrap them with blanks of branches (several pieces), leaving 3 cm free at the bottom. We fix the ends of the matter with glue;
• We collect the blanks into a single "apple tree". We cut off a strip of 3 cm from the fabric, wrap it around the canvas and the branches connected to each other. We also fix the fabric ends with glue;

• To make a decorative apple tree further, we install it in a container with a narrow neck. If such dishes could not be found, then in order to fix the “plant”, we pour cement or gypsum mortar into the container. We straighten the branches and begin to decorate our craft;
• Now we will cut leaves of different sizes from green matter, and singe their edges over the flame, not bringing them very close to it so that they do not spread;

• We glue the leaves on the branches and begin to create fruits that are made from. Cut out 2 circles from cardboard, 3 cm in diameter. We draw a smaller circle inside and cut it out, we get 2 cardboard rings;
• We connect them into a single part, we wind a red thread on it with a hook. The yarn should completely “hide” the workpiece. We cut it from the outer edge, lay a brown thread and use it to tighten the resulting pompom;

• Cut out leaves from green material, glue on a brown thread;
• We hang ready-made "fruits" on the branches. You can also decorate the pot as you wish.

Volumetric tree on the wall

This unique 3D decoration can be made by hand on the wall (and even on part of the ceiling) without any problems. To get a real masterpiece, it is not necessary to have the knowledge of a sculptor or artist.

Important: This decor requires a lot of space.

You will need:

• Master OK;
• Bucket;
• Marker and scissors;
• Acrylic paints and brushes;
• Scotch;
• A bag of dry gypsum;
• Large sheet of cellophane film.

Progress:

• Let's draw a contour mirror image on a cellophane film with a marker, and when we cut out the traced middle, we should get a stencil;
• We stick it on the wall with adhesive tape;
• Pour water into a bucket and dilute gypsum;
• Carefully fill in the empty stencil space with the help of a trowel;
• Remove the film after the mixture has dried;
• We apply a few more gypsum layers, the last one is rounded;
• When the solution dries well, paint the sculptural image with acrylic-based paints.

You can choose from a variety of palettes. In the living room, a “natural” image will look great, in a children's room on the wall - a fabulous tree, unusually painted.

decorative tree from branches

To decorate the interior of your home, you can make large artificial trees with flowers.

Necessary materials:

• Glue hot gun;
• Twigs;
• Sea pebbles;
• Square flowerpot;
• Decorative flowers (you can - paper);
• A piece of foam.

How to make a decorative tree yourself from ordinary branches:

• We fill the bottom of the flowerpot with sea pebbles and put foam plastic on them, and insert the prepared branch into it;
• We sprinkle it again with sea stones for good stability, insert moss on top;
• Now we decorate the branch. To do this, glue the decorative flowers randomly to the branch with a glue gun;
• After the end of this procedure, such a decorative craft will rightfully serve as a decoration for your house or apartment.

On the Internet, you can find many photos of trees made by yourself, choose the option that suits you and create your own masterpiece based on it. For another interesting idea for creating an artificial tree, see the video below.

Video: How to make a do-it-yourself LED tree

Alexander ForestLamp · 70,106 views

do-it-yourself wooden crafts

DIY spinner drawing

Do-it-yourself spinner, a drawing of a mechanism consisting of five components

Do-it-yourself wood craft drawings

Do-it-yourself drawings, wood crafts are an interesting activity that requires a creative approach to the implementation of the tasks set for yourself. AT

Drawings, do-it-yourself plywood crafts can be made with the appropriate equipment and a great desire, materialize

The drawing of a wooden chair for children

A drawing of a wooden children's chair, folded with their own hands, will surely bring joy to the baby by assembling and disassembling it

Plywood toys jigsaw blueprints

Toys made of plywood with a jigsaw, drawings of the designer of a children's truck, we bring to your attention

Drawing children's floor swing for home

A drawing of a do-it-yourself children's swing for the house, in the form of a horse, will bring additional fun to your baby's piggy bank

How to make a whistle from wood, drawing and

How to make a whistle out of wood, we bring to your attention a drawing and a detailed description of the products

Do-it-yourself drawings of plywood crafts

We cut out drawings, crafts from plywood with a jigsaw. Table lamp made of rings of various diameters

Drawing a bottle of plastic crafts with your own

Characteristics, technical description and areas of its application

Sawing with a jigsaw from plywood drawings

We bring to your attention drawings of napkin holders and stands for disks.

Stump crafts: stylish decorations made from natural material

First of all, sawing tree branches, we will get a lot of golden "coins" that your kids will certainly appreciate: they are perfect as a building material as an alternative to the usual cube.

And in order to combine business with pleasure, find a device for electric burning in the nearest children's or hardware store, and put the outlines of numbers on the cuts. Ready! Now you can unobtrusively teach children to count.

Another option is to burn letters on small sections of wood, and then glue small magnets to them. As a result, you will get a great kit for teaching kids the alphabet.

Crafts from a cut of wood can fit perfectly into the interior.

Wood crafts

If your cut has an oblong shape, we suggest using it as a watch face (you can look for a ready-made mechanism in needlework or home improvement stores). Such a country-style accessory can be made in two versions, using wood in its natural form or varnishing it.

Stump crafts can also be used to decorate your site, for example, by making such an attractive path from tree cuts out of them, which can complement your country path. Be sure to make sure that the wood components are firmly planted in the ground to avoid any trouble, and then decorate them with pebbles and moss to give your gravel driveway a new look.

Decorate the trees in your yard with stump crafts, what could be more natural! You can easily and simply make a rustic decoration out of cut felled wood by wrapping it with coarse sisal string and hanging it from a branch.

You can also connect individual parts into a garland, which can also be used for the New Year's decoration of your site, while it is better to additionally fix the ropes with wooden circles with transparent glue. If you want to make such a garland brighter, you can always decorate crafts made from cut wood with burnt patterns or paint bright patterns on them.

For a festive interior design in country style, you can also use such an elegant path made of wood saw cuts, painted with gold paint. Bottles will serve as a contrast to the shining tree, in which the festive decor will be reflected. Such an unusual and attractive decoration can be used to decorate a patio or a veranda.

Stump crafts can become the main detail of the interior in a rustic style. In this case, rough wood cuts serve as holders for candlesticks, pairing well with a table made of raw timber and a cheerful plaid tablecloth. Please note: the composition uses pieces of wood of different sizes, which looks especially impressive.

The same candles on stumps will become an organic addition to the Christmas tree. They are especially recommended for high bases under a tree, as in this case they bind the floor to the tree, filling the spaces and giving it weight.

An option for fans of stump crafts: the visual center of this interior is a wall completely finished with tree cuts.

Another important detail of this room are improvised individual coffee tables in a rustic style, made of "pyramids" of stumps.

More articles

Homemade wood crafts Technical literature

Sometimes with the help of simple things you can transform the house beyond recognition. And if it is also crafts for the home with your own hands, then you will not only show your individuality, but also be able to save money. Moreover, for this it is not necessary to be an experienced designer or do needlework.
The main thing is to be careful, and then even with the help of items that have not been used for their intended purpose for a long time, or improvised means, you will create beautiful and practical things.

Below we will tell you what you can do with your own hands for the home, as well as give some examples of step-by-step work for creatively updating your home interior.

Original DIY crafts for the home, photo

What to use for crafts

Any masterpiece starts with an idea, but you can get a boost of inspiration just by looking around: what can you use to create useful crafts for your home with your own hands?

Here are the most common options:

Advice: to create different crafts for the interior with your own hands, use old items: suitcases, plastic and metal buckets, mirrors, pieces of furniture. Many decor elements that have an aged look only decorate home rooms.

Of course, we cannot tell you about all the new DIY crafts for the home. But it’s not at all necessary to be limited only to these ideas: bring something of your own to the interior, involving the whole family in the process of creating crafts.

practical crafts

One of the interesting ideas for a do-it-yourself home is shelf made from old stairs as in the photo. To decorate it, we need boards, paint of any color (it is better to choose according to the style of the interior), brushes, a saw, sandpaper and glue. To begin with, start preparing the bases for the shelves themselves: calculate their dimensions - and cut the boards to the desired parameters.

Advice: sometimes the levels of the stairs on each side do not match. Glue additional leveling bars.

The boards that will serve as shelves are fixed in the stairs with glue. Next, the design is polished. When everything is ready, you can start painting and additional decor. On the shelves of this type you can store books, indoor plants, small accessories.

DIY ideas for the interior, photo

The next useful thing for the house with your own hands - desktop organizer. It can be made from wood, plastic, cardboard, glass and other durable items. We will tell you about how to quickly and easily make such crafts for your home with your own hands based on wooden beams.

You will need several bars at least 2 cm thick: one of these components should be 1 cm longer. To decorate the organizer, it is better to choose several colors: you can paint each of the bars in your own color. You will also need a chisel, sandpaper, saw, hammer, drill, vise, glue, brushes, pencil and ruler.

Start by planning your design and assigning an organizer. Depending on what will be stored here, we will have to do different work. For example, a long slot will be intended for a smartphone, which can be made with a saw. And for pens or pencils, you can make holes using a drill. Some holes are made with a chisel and hammer.

Advice: to make the design of the organizer smooth, first make a markup with a pencil and a ruler.

After all the holes and slots are ready, sand the surface of the bar with sandpaper. The finished upper part of the organizer is glued to a solid bar. To prevent the structure from moving when it dries, use a vise.

After about an hour, you can start further work. All slots and holes must be lengthened, so do the same for the bottom glued bar, taking into account the design of the top one.

do-it-yourself wood crafts at home

The longest bar is glued to the bottom of this structure.

Advice: if you want to make an additional slot for paper, as in the photo, cut off the two upper bars, and paste the cut elements on the opposite side of the base.

Do-it-yourself design ideas for the home, photo

After gluing is completed, you can begin to decorate the organizer. You can use not only paints, but also, for example, sparkles or decorative stickers. Beautiful DIY crafts made at home, like such an organizer, will become not only an assistant in work, but also a table decoration.

And below in the photo is an example of one of the interesting crafts for the home with your own hands of small size: coaster for glasses and cups. Collect a sufficient number of wine corks (about 20-30 pieces, depending on the desired size of the stand). Lay out these elements in the desired shape (circle, oval, square or even a heart: they can look like anything) - and wrap it tightly with wire.

You can fill the empty space in the stand with trimmings of the same plugs. If you are worried that the stand will fall apart over time, fix the corks together with glue, wrap them with electrical tape, or prepare a solid top made of cardboard or wood for them.

DIY crafts, photo

With the help of improvised means, you can do everything for the house with your own hands. Quite often they make their own from wood, plastic or glass. coffee tables. In the photo you can see one of the examples of such crafts: the table is made very quickly, since it only involves connecting several wooden boxes.

Glue or nail together the table's components, decorate it however you like, and add a few inserts to create interior shelves, and you've got a comfortable coffee table ready. By the way, the tree is in harmony with any materials and colors, so it will not be difficult to fit a new table into the interior.

DIY home ideas, photo

Your children can help you create unusual and beautiful things with your own hands. Entrust them with simple tasks: glue or paint crafts, choose materials and colors. These can be papier-mâché plates and saucers, practical needle pads, painted buckets as flower pots, notepads and much more.

Do-it-yourself original children's crafts at home include handy hanger like the photo below. In addition to holders, it includes several pockets for storing toys, jewelry and other items.

This craft is made as easy as shelling pears: fabric elements sewn by hand are attached to a wooden base.

DIY crafts for home, photo

Using the materials that you have at home, you can come up with many more interesting solutions and build cool and interesting things and products you need in everyday life.

Some do-it-yourself crafts for the home are useful things and decorative elements at the same time. So let's find out what will help us make our home even prettier.

On the eve of the New Year, we suggest making a mini-Christmas tree - a New Year's topiary with your own hands: a master class on making and a video instruction will help you make a festive craft without mistakes.

See photos of bedroom design options for young spouses in this article.

Crafts for interior decor

Nothing catches the eye like unusual oversized wall decorations. Therefore, if you have a large mirror, make it spectacular frame from improvised materials.

You will find a lot of photos of smart and cool DIY home ideas with decorated mirrors: framing can be made of glass mosaic, plastic, fabric, shells or pasta, all sorts of different buttons, clothespins, cutlery, decorative flowers and other items.

How about such an idea? The frame is made from many multi-colored newspaper tubes of the same thickness.

We continue to make crafts and decorate the house with our own hands: original ideas can be realized using plastic dishes. For example, spoons that only need to be glued to a base that can withstand such decor.

In the next photo - another idea for a do-it-yourself home: a lot of tops from disposable spoons were glued onto a plastic bottle to create a lamp shape.

You can make a few of these decorations - and decorate the whole room with updated handmade lamps, but do not forget that plastic is a fire hazard.

Beautiful DIY crafts, photo

Another idea on how to make beautiful DIY crafts for home decor: this time it's about creating a spring atmosphere through artificial flowers from improvised means. Such ideas for a do-it-yourself apartment do not require special training.

The simplest floral arrangements are created using flat stencils used for starched fabric: the buds are strung on a wire - and fixed.

But some types of flowers, such as roses, are more difficult to make. For such a handmade decor, you need to cut out a paper or fabric circle with a diameter of about 15-20 cm with your own hands. Next, the figure is cut in a spiral - and twisted from top to bottom. The petals of such a flower must be carefully straightened, and the flower itself must be glued so that it does not fall apart.

Such original ideas for the home will allow you to decorate a vase, as well as frames, decorative panels and other surfaces.

Next craft: DIY beautiful and cute things for the house from large beads. For example, how about a do-it-yourself interior design idea in the form of a candlestick? Take a regular disk - and with the help of glue, begin to fix each of the beads in a circle. After the first layer has dried, proceed to the next.

Advice. For a better effect, use transparent beads that will allow light to pass through.

Beauty, right? Such creative ideas for the home will come in handy during the holidays.

Ideas for an apartment with your own hands, photo

And now we make the most interesting thing for the house with our own hands: we decorate the window area. Creative and useful do-it-yourself crafts here will be curtains. And it’s not at all necessary to sew them from fabric: show your imagination and create filament curtains from improvised items of small sizes.

You can make a curtain in the form of many vertical garlands of paper, cardboard or felt.

Original ideas for a do-it-yourself home, photo

Using ingenuity, design approach and improvised means, you can create other unusual and original things for the home.

So do something new with your own hands for the house: this will only make it better.

Is there a little birthday in the family? It's time to learn how to decorate a child's room for a birthday - all the secrets and subtleties of technology are described in detail.

Even dishes can become a place for applying creative abilities. Find out how to use a variety of decorative ceramic wall plates in your home decor here.

How to make your home cozy with your own hands? A lot of ideas for decor and comfort - in the article at: http://prostilno.ru/idei/uyut-v-dome.html

Video

Watch the video for five more DIY home decor ideas:

DIY wood crafts - step by step instructions

DIY wood crafts: photos and best ideas

Interesting DIY wood crafts for beginners

DIY: DIY crafts. Home Ideas

We make crafts with our own hands: photos, diagrams, instructions

Home crafts with photo instructions

Such a design element as a cut tree is currently not in every home, even with more confidence we can say that it can be seen quite rarely. Because Russian designers are just starting to use this practice. And decorations from tree cuts are mainly created by people in the hand mate sphere. If you have a front plot of land at your disposal, then one way or another, you are engaged in sawing trees. And you can turn the resulting wood into a great decoration. And in this article, we will tell our readers about how to use tree cuts for decoration.

We decorate the walls with tree cuts

Decorating your house with wooden saw cuts makes it, firstly, unique, and secondly, it brings a touch of naturalness into it, as if reuniting with nature. Basically, this element of decor is used as wall decoration. This is done quite easily. You just need to take either a branch or a tree trunk and saw it into thin bars, which later will be an element of decor. And any of the resulting saw cuts will be unlike the other, and make the bars whatever sizes you want.

It is better to remove the bark from a tree if it is large, but if it is thin, then you can save it. It is recommended that the saw cuts be sanded a little so that you or guests do not accidentally bring a splinter. As you know, what raw materials for decor, like wood, are very attractive to a variety of insects, and therefore, it is better to process the bars with special solutions. You can decorate them with paint or varnish. But how to finish the wall, you decide on your own. You can completely cover the wall with tree cuts, or you can take only part of it. No matter how you decide to decorate the wall, it will look just great.

Fastening saw cuts to the wall is carried out with special glue.

On a note! In order for the glue to securely fix the wood bars on the wall, it must first be cleaned and leveled.

Unusually panel of wood cuts

Wood cuts in the interior look quite beautiful. And a photo of modern interiors will help to verify this. In this part of the article, we will talk about how to create a panel using tree cuts?

So, the panel is a kind of composition, which just consists of wooden bars. And it looks just unusual and unique. That is, you will get a kind of picture that will make your interior unforgettable. Here also, at your discretion, you can remove the bark from the tree, or you can not. The saw cuts do not have to be the same in thickness, but the outline of the panel, to add beauty, is preferable to cut in the same size. Let's say right away that your picture will turn out to be a little abstract, since wood is not quite the material from which you can get a clear picture. So there is scope for your imagination. Basically, the cuts are polished from the side that will be mounted on the wall, but the other is left untouched in order to give the composition a natural look. To give originality and exclusivity, you need to use elements such as branches, hemp and others in the manufacture of panels.

How to make a floor with wooden saw cuts

Currently, wooden floors are widely used. Therefore, one should not be surprised that tree cuts will also be useful for this part of the house. Well, of course, some small branches simply will not fit here. Bars will have to be cut out of trunks, well, or from large tree branches. The size of the bars should not be small in thickness, because the floors are regularly loaded. And, of course, a tree of softer varieties will not work. Otherwise, the life of the floor will be greatly reduced. This type of decor is considered the most difficult. For several reasons.

• The first is that ordinary glue will definitely not work here, you will have to resort to using a special solution.
• The second is that after all the saw cuts are on the floor, you will have to grind very carefully and diligently until all the pieces get the same level and become smooth. After that, you can proceed to the procedure of varnishing the floor so that it begins to shine, and the varnish will also create a protective layer from moisture, dirt and wiping.

Varnish should be chosen one that is designed for wood, since in most cases they contain elements that repel various insects. And also the varnish will allow the floor to look like new for as long as possible.

We decorate the house with saw cuts from a tree

Wooden saw cuts can be used to decorate your home anywhere. The main thing here is your imagination. These decorative elements are not limited to floors and walls. Here is a basic list of what can be done or where to use wood blocks:

• Various vases and tubs for flowers. After spending a little time and effort, you will get a wonderful flower pot, which is inexpensive and will be a great decoration for your room. Real plants and flowers go great with wood, and when a vase or pot sits on a wooden floor, it's just a marvelous combination. Saw cuts will help not to lose the essence of the item that you are decorating, just use wooden circles of small diameter.
• Shelves for anything, coasters for hot. At the heart of such elements is a thick bar, from the trunk. As one of the ways you just grind it and apply varnish. But this method is most practical for making shelves.

  But coasters for hot need a longer manufacturing process. To make such a thing, you will need the same cut of the trunk, and you will have to remove the middle from it. And cuts are placed in the recess, only smaller in diameter. This will make your product exclusive. If you have never done this, then practice on simple raw materials (take small saw cuts).

• Watch.

  do-it-yourself wood crafts video

  This element of your room will not only become a beautiful decoration, but will also perform, let's say, household functions. Of course, to make a wooden clock, you need a real working clock. So, you take a wooden saw cut and make a hole in the middle and pass the arrow holder through it (the whole mechanism will be on the inside of the saw cut). After that, we fasten the clock hands directly and that's it, the clock is ready! And it's up to you to draw the dial or not.

• Decor elements such as picture frames or mirrors can be pasted over with small branches. In this case, these decor items will become truly unique and very attractive.
• Stylized wreaths. You can also use artificial flowers in the decor, but putting them in a vase is boring and too easy. This wreath is very easy to make. As a base, a round metal hoop is needed, it will do, and an ordinary wire of which must be given the required shape. Then it is necessary to paste over the form with small saw cuts, and then add branches, cones, artificial flowers, etc. on top. You will get a unique wreath that you will be proud to show to friends and family. Such a wreath can be hung in the hallway.
• Hanger. A design decision can be called a hanger made of saw cuts, of medium thickness, inserted into a rectangular frame. It is only necessary that the saw cuts have knots - they will serve as hooks for clothes. Such a hanger will look absolutely chic in the hallway.
• Tables and chairs. Everything is clear here! The tabletop is a large saw cut of a tree and legs made of small saw cuts in diameter are attached to it. Usually the made product is not painted, it fits perfectly into the interior of a summer house or a private house.

People with a highly developed imagination can bring to life even more ideas using saw cuts from wood, both decorative elements and things that are useful in everyday life. So, for example, cups for pencils and pens will look very nice. There is plenty of room for rampant fantasy and the embodiment of ideas. And what would you do with saw cuts? Now in this article we will show you how wood cuts look in the interior.

Old trees occupy an area that can be identified for more useful and functional elements. Dry giants only litter with dead branches and remnants of greenery, practically do not give shade, but take up a lot of space.

After sawing and uprooting, most often the wood eventually ends up in a fire.

The best gift is the one made with your own hands and from environmentally friendly materials. The tree surrounds us everywhere: branches, stumps, bars - from everything you can create a real work of art.

Think it's very difficult? Present to your mother, try to make wood crafts with your own hands. For beginners, we have prepared detailed instructions.

In contact with

wood craft ideas

Add wooden accents to your interior. From the bar material it will turn out, a toy box, even a table. In just a few hours, make an unusual candlestick or a Scandinavian-style photo frame.

Craft what is missing in your home, down to small and useful things: a hanger, a tray, a cutting board, a vase or a Christmas tree holder.

The summer season opens a new period of creativity. Do not rush to uproot old stumps, turn them into fantastic creatures. When things get smaller in the garden, take the time to build a treehouse for the kids or

It will take a lot of time, but the result will please. Decorate a recreation area near the house with wooden hanging toys, cut out a bench or create an unusual wooden one.

If you have little helpers, then by all means do the joint production of simple wood products with your own hands. Children will like this pastime, and the result of joint work will be a unique wooden toy. . Make a plywood gun for a boy or a stick doll for a girl. From wooden clothespins, the guys will be able to make a snowflake for New Year's decoration even without your help.

Advice! Before manufacturing, draw a sketch. Transfer the design from paper to wood and cut out unique decor items.

How to make simple DIY wood crafts

Workshop, a huge number of tools, varnishes and paints - it is not necessary to complicate the task, there is an easier way . The main thing is the availability of material, cutter and grinding. If you have never worked with wood, follow the step by step instructions for making easy wood crafts.

chrysalis from branches

If you don’t know what to make from wood with your own hands, nature itself will give you an idea. Choose the material from which you will create. From the branches you can make not only a hanger, ikebana, but also an unusual doll.

Tools and materials

For manufacturing you will need:

• branches;
• electrical tape, adhesive tape;
• the cloth;
• threads;
• scissors;
• needles;
• toy eyes or buttons;
• felt.

Step-by-step instruction

Before starting work, collect dry and strong small branches in the yard. Rinse and dry the tree during the day. For the safety of subsequent operation, treat the branches with a special varnish for. This method will preserve the natural texture of the wood. Then follow the plan:

1. Pick up branches for the chrysalis. Connect the parts with masking tape or tape to make a little man with legs and arms.
2. Make the head of the felt toy by sewing two round pieces together. Put your head on a branch, add realism to the doll's face with purchased small eyes or bright buttons.
3. Make hair out of woolen threads, floss, glue or sew them to the felt head. You can braid.
4. Sew clothes from fabric patches, slippers for the doll from felt.
5. Complete the fantasy image with your child. Make several sets of clothes, create incredible hairstyles from long filament hair.

A small wooden craft can become not just a toy for a child, but also an interior decoration.

Prices for crafts from polyresin

polyresin

DIY clothes hanger

The manufacturing process is more complicated, it will take more time and materials. Such a hanger-shelf can be placed in the corridor, add variety to the style of the apartment with a designer handicraft made of wood with your own hands.

Tools and materials

For the shelf hanger you will need:

• dense branches of the same size;
• boards or plywood;
• nails;
• glue;
• paint for wood;
• saw.

Step-by-step instruction

Choose the same branches in thickness and height. For the basis of an interesting wood craft, you can use a finished shelf. Then:

1. Treat the wood with a special impregnation or cover with a layer of paint.
2. Use a saw to trim the branches to the height of the shelf. They should fit snugly against the boards.
3. Fasten the branches to the shelf with glue or nails, laying them close together and with the branches facing out. It is the wooden protrusions that will play the role of hooks for clothes.
4. Paint the finished product with wood paint.

plywood prices

Advice! Observe safety precautions. Make original wood crafts in the garage or on the balcony, process wood in a well-ventilated area. Protect young children from access to piercing and cutting tools.

DIY wooden crafts using cut out parts

There is no limit to perfection. Experienced craftsmen, armed with a jigsaw and a grinder, can create lamps, decorative cabinets and various artistic wood crafts. Professionals hone their skills for years. What kindDIY wood craftscan be donefor homewithout special machines and machine tools?

Mug for kvass

Dishes for real men! It is easy to make such a craft from wood bars with your own hands, following the recommendations. The work is male, but a woman can also carve a product herself if she has the tools.

Tools and materials

Prepare in advance:

1. wood bars or cutting board;
2. grinding nozzle on the grinder;
3. PVA glue;
4. tight rope;
5. tin can;
6. tourniquet;
7. iron rings;
8. cutter.

Step-by-step instruction

If you have ready-made and polished pieces of bars, then the manufacturing time is halved. If only the board is available, you need to start from scratch:

1. Mark the board every 2-5 cm, cut it, sand it with a special attachment for the grinder.
2. Place the bars tightly around the iron can, smearing the sides with glue, fasten with a tourniquet or elastic band.
3. We grind the dried product inside and out.
4. Cut out the bottom and handle from the board, glue the details.
5. Secure the mug with iron rings.

You can decorate the finished product to your liking: cut out the initials or make a commemorative inscription. This mug would make a great gift for a friend.

Important! Sand the mug carefully so that there are no sharp corners.

Wooden tie

Newfangled trend - handicrafts made of wood ... in fashion design! On New Year's Eve or at the prom, no one will have such a tie.

Tools and materials

For work you need:

• plywood or board;
• the cloth;
• scissors;
• sewing kit;
• grinding machine;
• cutter.

Step-by-step instruction

A bow tie is made to order by experienced craftsmen, and it is quite expensive. An interesting wood product can be made by any beginner. Such an accessory will complement an unusual male image. Let's get started:

1. Draw a sketch. Think over all the details, from size to shape.
2. Cut out a bow tie from wood, sand the edges and process.
3. Sew a fabric holder, secure the wooden accessory with a knot, forming a classic pillow in the middle of the butterfly.
4. Decorate the finished tie with an inscription or engraving.

A wooden butterfly will be the highlight of the presenter's or musician's style.

Flowers made of wood

Flowers are a great idea for wood crafts. Universal decor is suitable for decorating the living room, bedroom or hallway. Choose dense types of wood. To make wooden flowers, practice cutting triangular shapes with a special knife.

Tools and materials

Preparing in advance:

• wooden block;
• knife-cutter;
• joint knife;
• plasticine;
• wire;
• emery nozzle;
• paints, varnishes.

Step-by-step instruction

Draw a diagram of the craft. Let the first floral experience be a simple model of an uncomplicated form. Later you will be able to carve intricate lilies with detailed petal structure. Stick to the following algorithm:

1. Think over the flower model: how many petals will be, size, shape, etc.
2. Transfer the drawing to wood plywood, cut out the elements.
3. Using plasticine, fix the petals on the core. Make a stem out of metal wire.
4. Process the details with a joint knife, shape the flower.
5. Sand the flowers with an emery tool.
6. Unleash your creativity. Color the flower to your liking.

Advice! Make a topiary or bouquet. Give your friend flowers for her birthday that will never wither.

How to grind the details of wood crafts with your own hands

The most important step in creating wood crafts is grinding. Using a grinder, you can process the surface of large elements and wooden objects.. How and with what to make the surface of the parts smooth?

Knowing what crafts can be made from wood, make the material perfectly smooth with:

• grinder;
• drill bits;
• grinders;
• sandpaper.

Manual grinding is convenient for processing the edges of small parts. Follow the small rules of procedure:

1. Sand along the grain, parallel to the plane of the part.
2. Treat the edges with different types of sandpaper: from coarse to fine-grained.

What can be used to create DIY crafts

Do you want to create, but the materials are expensive? Do not buy an expensive tree. To make crafts, use everything that is at hand:

1. You can make fantastic gnomes from logs in the country.
2. Wood cuts will be great coasters for hot dishes or the basis for a Scandinavian-style wooden clock.
3. Puppet amulets, hangers, unusual bouquets are created from branches.