Rocking donkey for children drawings. Rocking horse for children from plywood. Wooden rocking horse with your own hands. How to use the universal chair

How to make a plywood rocking horse from Kata Toth studio at home

Do you want to make a rocking chair, a high chair and a desk for your child in one product? And do it quickly and cheaply? Then you should read our article in detail. You can be sure that your product will bring a lot of joy to the child, he will use it constantly and with great pleasure.

What you need to prepare for work

The list of materials and tools will not scare you; to make a three-in-one rocking chair, you will need:

• Plywood sheet of standard size, thickness approximately 20 millimeters. You can buy plywood of ordinary quality. Of course, pay attention to the appearance. The better condition the exterior veneers are, the less time you have to spend on finishing.
• Joiner's glue, a set of sanding skins of various numbers.
• Clear varnish, stain or oil paint.
• Manual electric jigsaw, measuring tools.

To make a drawing, you need to have some skills in transferring a drawing to paper or plywood, we will tell you about this in more detail.

Drawing development

Our tips for creating an outline on plywood do not apply only to this product, they apply to everything else. So how do you create a drawing? Enlarge the photos on the printer, while you should choose those positions in which the individual parts of the product can be seen in the most detail and without distortion. On the resulting image, apply a grid with a pencil, try to maximize the number of cells, this will help transfer the image more accurately. Then take a sheet of graph paper and count the same number of cells on it horizontally and vertically. On graph paper, the size of the cells must be increased to the actual size of the part.

Carefully and if possible, transfer the drawing to graph paper in the same way, observe the direction of the lines in each square. Now you can cut out the resulting drawing from graph paper and transfer the outline of the part to a sheet of plywood. As you can see, there is nothing complicated. And this means that you can make any product even from several photos from the Internet, the presence of detailed drawings is not at all necessary.

Cut out the details

Before starting to cut out the details - check the technical condition of the tool, this is a prerequisite for performing any work. The better the tool is, the easier and safer it is to work with, the better the cut will turn out, the less time you will have to spend on final grinding afterwards. The jigsaw should not have a runout, the saw blade should be in order, the cutting mode should correspond to the power of the jigsaw electric motor and the thickness of the plywood.

If “strange” sounds appear during cutting, it means that you do not follow the rules of cutting, and this will necessarily have the most negative impact on quality. Unpleasant sounds or vibrations can be the result of such violations:

• The place of the lower stop of plywood is at a great distance from the cutting point. Try to hold the plywood in such a way that the jigsaw file is as close as possible to the bottom stop.
• The plywood sheet takes root with insufficient effort. The pressing force must ensure the stability of the plywood.
• Faulty jigsaw or nail file blunt

Correct all oversights immediately, do not work in such conditions.

Preparing parts for assembly

Our universal rocking chair consists of two sidewalls-horses, a footrest (it also serves as a desk), a seat, a limiter (it is inserted only when turning the horse into a high chair) and a handle to stop during rocking. After cutting out all the details, you need to carefully sand them, remove all sharp corners. Do not forget that this is furniture for children, it must be safe to use. Children should not be injured, completely exclude the possibility of injury by splinters.

Polished parts must be coated with a layer of varnish, the coating will have to be done at least twice. If you wish, you can cover the rocking chair with stain or opaque paints, but we would advise using a transparent varnish. By the way, rocking horse designers also cover it with transparent varnish.

Choose a varnish taking into account the characteristics of plywood, it should not raise the pile during drying. If you apply varnish with a brush, then before starting work, work a little with this brush on unnecessary scraps of plywood. This way you will kill two birds with one stone.

• The brush will be cleared of "unnecessary" villi, they will no longer stick to finished parts.
• Find out about the quality of the varnish, if necessary, dilute it with a solvent. Too thick varnish in any case will not hide the traces of the brush, there will always be stripes from the villi. Too thin varnish will not provide a uniform coating layer.

If you applied the first coat of varnish along the fibers, then the second should be applied across the fibers. So you can achieve a more even surface of the workpieces.

Assembly of a universal rocking chair

We recommend assembling individual parts on self-tapping screws, the joints should be coated with carpentry glue. Be sure to drown the heads of the self-tapping screws, if necessary, sand the places around them again and re-varnish. During assembly, control the position of each part, all angles should be exactly 90 °. The glue must dry for at least 24 hours, do not rush to put your product into operation.

The wooden horse is being made from four main elements: from two flatly rounded sidewalls and two intermediate boards (the upper part and the part that serves to strengthen the structure).

In addition, a horse needs a head, and a small rider needs a saddle, a support back and two slats on which you can put your feet.

As a material, we use planed boards (at least 2 cm thick) made of pine or spruce.

The dimensions should be such that the child can sit comfortably and swing easily.
The main dimensions of the horse can be taken as follows: length - 110 cm, height - 60 cm and width 25-30 cm. It should be emphasized once again that the rounding should not form a semicircle, but correspond to a more elongated figure (like an ellipse) so that our horse does not roll over during an intense jump.

For board sides are interconnected and glued together with cold curing glue (this happens under pressure using large clamps or special linings). For rigid fixation, after cutting the sidewalls, the cross rails should be screwed to the inner sides as shown in the figure, i.e. middle - straight and both external obliquely. The thickness corresponds to the thickness of the boards, and the width should be approximately 8-12 cm. The internal support board is cut out at the intersections in accordance with the size of the rails.

The top and base boards are lubricated at the edges with cold curing glue and connected to the sidewalls with nails or screws.

Leg slats (length - approximately 40 cm, width - 5-6 cm, thickness - 3-4 cm) are glued to the sidewalls in accordance with the intended distance from the seat board and, for greater strength, they are screwed with additional screws (it is more advisable to do this before joining) .

Horse's head it is made of a board 3 cm thick and, depending on artistic abilities and skills, it is decoratively decorated by additional gluing of individual parts, for example, eyes and ears, as well as a mane made of leather, ropes, bast brushes for whitewashing, etc.

The support for the hands is made from a round stick 2 cm thick, which is inserted into a hole drilled in the horse's head and placed there with glue. Saddle carved from wood 2 cm thick and rounded at the top (can also be upholstered). It is nailed or screwed, and attention is paid to the fact that the nails and screws are recessed.
Boards for the back are taken of the same thickness. The head and back boards are attached to the top board with dowels.

In order not to spoil the lawn, it is also recommended shoe our horse. To do this, you can use soft plastic, rubber strips or thick foam strips. Depending on the load, these "horseshoes" should be updated from time to time.

The rocking horse has always been a favorite toy for children. Even now, a wide variety of games cannot replace it. You can also make a horse out of wood with your own hands. To do this, you need to find a suitable template and prepare tools and materials for the rocking chair and its subsequent finishing.

Necessary materials

The list will depend to a greater extent on the chosen template and the type of rocking chair, but most often you need to prepare:

• a photocopy of the selected template;
• pencil and carbon paper - with its help, the drawing will be transferred to plywood;
• sawing table and jigsaw;
• awl;
• glue with a brush;
• paint and brushes for finishing.

The rocking horse has a good effect on the vestibular apparatus of the child, contributing to its proper development. For the manufacture of children's toys, you need to use only eco-friendly and hypoallergenic materials. Fur upholstery will help to add naturalness to the horse, it is advisable to first place foam rubber or other soft material under it.

A carefully thought-out design will create a high-quality, safe and durable toy on which the child will spend time with pleasure.

simulation toy

The rocking horse, despite its popularity, has a small number of ready-made drawings. Indeed, now it is easier to purchase a finished model for a large amount than to make it yourself and create a unique toy.

If preference is given to the second option, then you need to seriously think about modeling the structure. To do this, you can use special computer programs. But it’s easier and more convenient to sketch a drawing on a piece of paper, and then create your own template.

With it, it will be possible to transfer the contours of parts to plywood or cut out the necessary structural elements from unplaned boards (their thickness must be at least two centimeters, otherwise the strength of the rocking chair will be insufficient).

The rocking horse must have an appropriate finish. There are practically no restrictions on this issue. The main thing is that it looks natural and does not irritate the eyes of the child.

The main components of the toy

The wooden rocking horse includes several parts, which, if properly manufactured, will ensure the strength and stability of the structure.

1. Lateral parts - are made in two copies. They look like flat rounded elements resembling the body of a horse.
2. Intermediate boards - it is also necessary to make two pieces. One of them is fixed on top, between the two sidewalls, and the other is lower (it provides strength).
3. The horse's head is cut from wood and carefully polished.
4. Saddle. It can be represented by simple plywood. It can also be made soft - using foam rubber and upholstery.
5. Reiki - they are made in the amount of four copies: two are set for the legs and two for the hands (reminiscent of horse reins).

The main task of creating a design is to ensure comfortable use of the toy and its safety for the child.

Construction steps

To simplify the manufacturing process, it is necessary to perform all steps sequentially. Then nothing important will be missed and much less time will be spent. A wooden rocking horse is made quite simply and quickly.

1. All parts are transferred to plywood individually in the required quantity. This is done with a carbon paper and a pencil.
2. After marking, all elements are cut with a jigsaw.
3. The cut parts are tried on. If necessary, some parts can be trimmed or edited so that the rocking horse is strong and all holes fit perfectly into the elements.
4. First, parts of the body, back and saddle of the horse are connected.
5. Then the assembled structure is attached to the prolegs and firmly fastened with spiked holes.
6. The last step is finishing. Here you can show your imagination with might and main. There can be many options: painting, upholstery, pasting, painting, burning. It all depends on the possibilities and wishes.

If desired, you can change the number and type of main elements. But first you need to think carefully about the design so that it is comfortable for the child and stable.

Finishing options for the finished toy

After the rocking chair is fully ready, you can start painting or painting it. In this matter, it is important to take into account the age of the child and his interests. For example, a cowboy horse can be made for a boy, and a rocking horse intended for a girl can be painted white and trimmed with a colored mane and a long tail.

For the smallest, the option with a horse located in the meadow is suitable. The runners in this case are painted green, imitating grass, and several flowers can also be drawn in the area of ​​​​the horse's mouth.

The general style of construction should be natural, then even the smallest will soon begin to recognize the horse and will study and master it with interest.

Photo store options

For inspiration, you can view photos of various designs that are presented in children's stores. Often the same toy is easy to make at home. Children's rocking horses made of wood will always be in demand among buyers.

1. Classic model, for middle-aged children. Made from durable wood. Perfectly fit into the classic interior of the room.

2. The model is suitable for children of the youngest age. It has a comfortable back and limiters that prevent the child from falling. When the child grows up, they can be removed, and the baby will be able to swing independently on this convenient toy.

3. An amazing horse for little princesses. The soft seat resembling a throne will impress any girl.

A handmade rocking horse will be a great gift for a child. It is possible that his future children will also like to play with this toy. Therefore, a horse is a universal gift for any childhood and for any holiday.

In the presented master class from the author, you will learn how you can make a children's rocking horse with your own hands, and at the same time it's good to save money, because today you know what prices for children's toys are, and wooden ones are generally impregnable. We decided to help people and prove by our own example that you can make great toys for your children with your own hands. And so let's look at how the master managed to make a horse for his child.

Tools
1. jigsaw
2. drill
3. sandpaper
4. pencil
5. ruler
6. router
7. brush

The process of creating a rocking horse with your own hands.
And so, it was mentioned above that you can save a lot of money when making a rocking chair, here is the author’s estimate for which he made the purchase: furniture board 650 rubles, wood glue 100 r, handle 50 r, total 800 r at the minimum price for the finished product in stores about 3000 r. Agree, a good saving is despite the fact that the author had to buy all the materials, and if you have a sheet of plywood in the trunk, and a good owner will always have a handle from a shovel, but glue should always be available. If there are all the components, then the toy for the child will be made free of charge. According to the author, he chose and searched for a sample on the Internet for a long time, finding a pattern made directly from a computer monitor, then he scaled them and transferred them to a newspaper.

To simplify this process, you can use the drawings.

Then the master proceeds to the manufacture of a pattern, for this he uses an ordinary newspaper, that's what he got out of it.

After the contour is applied to the surface, the author takes a jigsaw and cuts out the blanks.

Holes should be drilled in the received parts, which the master does.

And now all the details are cut out, they lie in one place.

You can also use a milling cutter to round sharp corners and protect the child from splinters.

When all the details are prepared, you can proceed to the assembly into a general design. Here the author saws the cutting into pieces and inserts it into pre-drilled holes, pre-lubricating the joints with carpentry glue. And so the build process.

Here is such a rocking horse our author got, which he is very happy about, because he saved some money for the family budget and the child is furiously delighted with his new toy. This concludes the article. Thank you for your attention! Come visit more often, do not miss the news in the world of homemade products! The article is presented for informational purposes only!

So: There was time, material and desire….

Somehow they decided to make a rocking chair as a gift to Da's niece. Traveling through the expanses of the world wide web, we came across this ...

Out of everything I've seen, I liked it the most. Firstly, it is original, and secondly, it is not difficult to make.

In the stocks there was an unplaned board, 2.5 cm thick. I made everything from it, except for the seat (furniture board) and the base, which was obtained from the remnants of the floorboard.

The first stage was, as usual, modeling. After all, no one lays out the drawings ...

Height from base to seat: 38cm

The second stage - assembly and painting There is not much to tell here: I sawed out all the details with a jigsaw, cleaned with an eccentric sandpaper 120, then 180.

Despite the fact that the horse looked pretty nice in a clean tree, we decided to paint it.

First primed...

then we tried coloring on a computer:

option from me :) So tried to sketch an idea..

Da option:

and as a result, the third option from Da won .... so they painted

A day later, after the paint and varnish had dried, we started the tests, which were very successful. The maximum load is 80 kg.

PySy: When they gave it, the parents were more happy, and the rocking chair turned out to grow for the child, now the niece is 1.2 years old. I think the year 1.5 will be just right.

Dear visitors of the SAMODELKINDRUG website, the material presented will show in detail how to make a rocking horse with your own hands. Today in children's stores there is simply an incredible variety of different toys, for any whim of your child. But prices do not always please parents, because you know what the extra charge for children's goods is. So, in order to save family money and please his beloved child, the author decided to make a rocking horse with his own hands.

To do this, the master needed a minimum of material that he bought in a hardware store: a furniture board for 650 r, a handle for 50 r, wood glue for 100 r. You can also use puff plywood, for sure, many have these components without a purchase, which means that you can make a toy for a child absolutely free. Let's look at what exactly the master needed, as well as all the stages of creating a rocking chair.

materials

1. furniture board
2. stalk (from a shovel)
3. wood glue
4. wooden chopsticks

Tools

1. jigsaw
2. drill
3. brush
4. pattern
5. ruler
6. pencil

And so the drawings were made first of all, but first the author had to search for them on the Internet. Next, the master made a pattern from these drawings and transferred it to a newspaper.
After the pattern is superimposed on the furniture board and the outline is outlined.
Then the master cuts out from the shield the components of the overall design of the future toy.
And here are all the details cut out.
Next, the author fastens the blanks for their subsequent edging.
Holes were also made in the blanks.
The moment has come to assemble all the blanks into a single structure.
The seat is attached.
After the joints are dry, you can test 😉
Ride!!!
Planned tests were successfully completed!
And now the war horse was left to rest a little under the Christmas tree.
Here is such a wonderful horse that our author turned out, the child of the master is very pleased with the toy and now plays with it every day. As you can see, there is nothing complicated, if you wish, you can make your child the same and at the same time save some money. If you liked this material, then welcome to our group

I was inspired to create this project sixsay mustang baby rocking horse . I really liked the idea of ​​the toy. There was a desire to implement something similar, but in the style of the theme of the site. Namely, to implement in plywood. Perhaps this is to some extent plagiarism, but practically only the idea and form of the main part are taken from the original. In fact, here almost all elements / nodes were created anew. Most of the original parts are made of wood. They were connected with glue. Plywood can also be glued. But special tools, conditions and skills are needed. The same glue, clamps, experience. Let me remind you, I am an amateur in this business))). I have practically none of this.

And there is a will to do it.

The idea is this:

So: the goal is defined, the task is set.

For the manufacture I plan to use plywood 18mm thick.

The rocking horse will consist of six main parts:

• the main detail - the body of the horse - the most recognizable part
• two parts - a pair of front and a pair of hind legs. Unlike the original, I decided to make a pair of legs in one piece - this way fewer parts will come out and, accordingly, the strength will be higher.
• two parts guides - skids
• saddle

There is also a hand rest detail, but so far I have not decided on it. Perhaps there will be one more detail.

The process of making your own children's plywood rocking horse

Drawing details

The image explains the process of drawing details. Since this toy is for children and children will play with it, I was a little safe. I made the part a little thicker there, a little wider there, etc. As a result, the height at the top of the saddle came out to about 480 mm. Quite a lot… Taking into account the height of the skids, the size will decrease to about 420mm. Total for children about 3-5 years, well, maybe 4-5 years.

Here are the details without guide lines

The connection of the parts is planned groove to groove. The front and hind legs are at a slight angle to each other. After the “legs” enter the grooves in the body, the runners will not be able to put on without additional efforts.

Here I think the “flexibility” of plywood will help out. One of the pairs of legs will have to be bent so that the part fits into the groove in the skid. (Therefore, the grooves in the skids are not deep.) But then it will not fall out so easily. Thus, the runners, torso and legs of the rocking horse will enter the “lock” and, possibly (!), will not need additional fastenings. The seat remains. To attach it to the horse, you will have to use either confirmants from above, or corners from below.

Rocking horse in 3d

Here's what happened in 3d

Renderings of a rocking horse

Here is a short video I made

Detailing.

Faced with an unpleasant moment. I tried to create a cut map for plywood parts using the OpiNest program. The body of the horse is drawn with a spline. It turned out OptiNest does not recognize such shapes. Or maybe I didn't do it right. Didn't bother too much with it. Outlined the "torso" with a broken line of straight segments. To create an approximate map, the cut will do. The main thing is to decide what piece of plywood is needed for one rocking horse, and how many horses will fit on a standard sheet of plywood. Then, in a real cut map, substitute a spline detail.

So. To make one rocking horse, you need a piece of plywood about 700 by 1250 mm

And from a sheet of plywood it is possible to make four rocking horses.

Actually, at this stage, that's all. Items 4, 5, 6 are still being postponed.

I want to emphasize once again that this is still at the stage of a test project. Perhaps not everything will work out the first time. I'm sure it will be better the second time.
Tried to take into account all the moments. Could it? This will show only the implementation.

Who wants / can participate in the creation - I will send the files. From you a link to the author and a photo report.

It just so happened that the new year according to the eastern calendar is the year of the horse. So this project is a gift to all site visitors! With coming! Happy coming!
In the near future I will post the drawings, working files of the rocking horse. Follow the news)))
Yes! There is no name for this project yet. Who has any ideas???

In stores you can find a huge number of all kinds of children's rocking chairs, such as classic cradles, animal rocking chairs, for example, horses, as well as rocking chairs depicting favorite characters from children's fairy tales.

And the question immediately arises, is it possible to make your own rocking chair for the specific height of the child?

It is possible and necessary, because the manufacturing process is not time-consuming and very exciting. All you need is desire. Get creative with making rocking chairs, don't be afraid to experiment. Do-it-yourself baby rocking chairs will be of high quality, reliability, originality, as well as low cost, compared to those purchased in a store.

Fervent laughter and joy in the eyes of a child is the best gratitude for your work. It doesn't matter if you decide to make a horse, a giraffe or an elephant, the rocking chair will give a lot of positive emotions that children will remember for a lifetime. Such things, as a rule, are stored for a long time and pass from generation to generation. Your children, and later grandchildren, will certainly feel your diligence and love!

Material selection

To make a children's rocking chair with your own hands, it is not at all necessary to have special skills. It is important to carefully follow the instructions and follow the sequence of the technological process.

For a children's rocking chair, wood species of increased strength characteristics are used. The product during operation will experience loads up to 30 kg. Soft breeds will not provide the durability and safety needed for children.

Preparation of templates and production of parts

Based on the age and height of the child, determine the size of the baby rocking chair. To do this, you need to scale each detail.

Prepare plywood that is at least 18mm thick. Using wood glue, fix the templates pre-cut out of paper on a sheet of plywood. The glued template will not move, and you can easily trace its outline with a pencil. Cutting parts is best done with a hand or electric saw; a jigsaw also does an excellent job with this task. After all the details are ready, the cut lines must be processed with a grinder or a sheet of sandpaper.

The proposed templates can be independently transformed if desired, for example, by adding a backrest, which will make the chair more stable, supporting the posture and balance of the child.

Build quality and safety

Eyes and a hole for the tail are made with a drill. If you plan to make a non-separable structure in the future, then all joints during assembly are additionally treated with glue designed for gluing wooden products. Attach the base assembly to the finished elephant. Make sure the wheelchair swings easily and is stable at the same time.

Safe paint is used for coloring children's toys. The rocking chair can be painted in different colors or made plain. After two days, which are required for the paint to dry, you can start applying a colorless varnish. It will add extra shine and protect the paint from crackling. Assembly parts for rocking chairs can be painted both individually and after final assembly. The finished product is painted in several stages so that the top and base are completely painted.

When the baby rocking chair is ready, it remains to fix the rope in the place where the tail is attached. To make the tail, you will need a rope of such thickness that it can be freely inserted and glued into a previously drilled hole.

Operation and storage

Unlike children's rocking chairs powered by power sources, wooden ones are the most practical and easy to use. The absence of wires and bolted connections in the design ensures a high level of safety. If power supply is required to operate electric rocking chairs, then a do-it-yourself wooden analogue works flawlessly at any time. The child sits down on his own, takes a comfortable position and his parents cannot stop him.

It should be noted that modern toys are made from various polymers, plastics and other chemicals that can harm the health of the child. Plastic toys are only safe at first glance, but when exposed to direct sunlight, toxic substances are released that the child inhales. A wooden rocking chair made from natural materials is rightfully considered environmentally friendly and safe.

Store the baby rocker in a dry place, away from any self-igniting or combustible objects, such as a radiator, a lamp. When stored in a room with windows, the rocking chair should be protected from sunlight. To do this, just throw a blanket or thick fabric over the product. Air humidity should not exceed 60%, otherwise the wooden product may swell from excess moisture. Humidity below 45% leads to the appearance of cracks due to the drying of the wood fibers.