Overview of models of gas boilers manufactured by the Korean company Navien. Wall-mounted gas boilers NAVIEN Ace TURBO

Korean wall-mounted double-circuit gas boilers Navien today are the best option when buying, given the sharp rise in price of all imported heating equipment. Of course, the increase in the price of gas boilers has affected all manufacturers, but you must admit that it is one thing to pay 30-35 thousand rubles for a boiler, and another to buy it for 50-60 thousand.

Is it worth overpaying, in fact, for the same thing, only made in Italy or? Good build quality, reliability, customer reviews and, most importantly, low price have made the Navien brand very popular in Russia in recent years.

In this review, we will try to understand the models of Navien boilers on the Russian market, their differences, device and technical characteristics, as well as the advantages and disadvantages of boilers of this brand.

Features of models of gas boilers Navien

In the Russian market, the company sells double-circuit wall-mounted gas boilers, both with forced draft (turbocharged) and natural (atmospheric). They are designed for heating a house with a total area of ​​30 to 400 m2, depending on their capacity.

All models are double-circuit, which makes it possible to use them for heating household running water for domestic needs. They can operate on natural and liquefied gas.

Gas boilers Navien Prime and Navien Deluxe

The performance of hot water also depends on the power of the gas boiler. The higher its power, the more water it will give you. Boilers with a capacity of 13 kW produce 10-11 liters of hot water per minute, from 16 kW to 24 kW - 14 l / min., from 30 kW - about 16-17 liters. In practice, it has been proven that for a good supply of hot water to a family of several people, a capacity of 14 l / min is quite enough.

Turbocharged boilers are represented by a wide power range from 13 to 40 kW. The number in the abbreviation indicates the thermal power of a particular wall-mounted boiler model.

In stores you can find the following models:

— Navien Deluxe 13k;
— Navien Deluxe 16k;
— Navien Deluxe 20k;
— Navien;
— Navien Deluxe 30k;
— Navien Deluxe 35k;
— Navien Deluxe 40k.

Boilers Navien Deluxe Coaxial - Specifications

Table of technical characteristics of Navien Deluxe Coaxial boilers

In addition, turbocharged (with a closed combustion chamber) double-circuit gas boilers of a Korean manufacturer differ in the type of output of combustion products and air inflow.

They are of two types:

- with a coaxial chimney;

- with a separate chimney.

Boilers Navien with a coaxial chimney are labeled Deluxe Coaxial. In previous years, a 24 kW turbocharged boiler was designated as Navien Ace 24 E. Where the letter "E" meant "Euro", i.e. European type of chimney pipe.

A coaxial chimney is a pipe-in-pipe chimney. Air flows into the boiler from the street through the outer pipe, and combustion products are ejected through the inner pipe. The diameter of these pipes is 60/100 mm, which is also indicated in the instructions.

For those situations, if the installation of a gas boiler is impossible according to the project, practical and cunning Koreans came up with a boiler with the possibility of installing the so-called separate chimney.

This type of turbo-boiler is already equipped with two pipes for connecting: the first pipe, which ejects combustion products, and the second one for air suction. Instead of the second pipe, you can also put aluminum corrugation, it is cheaper. The nozzle diameter is 75 mm and 70 mm, respectively.

This type of boiler is marked with the letter "K", i.e. Korean version of the chimney. For example, if you see the designation Navien Deluxe 16K on the price tag of a boiler in a store, this means that you have exactly this type of Korean-made double-circuit gas boiler. See photo below.

When choosing a boiler, also keep in mind that boilers with a Korean version of the chimney are produced with a maximum power of up to 40 kW inclusive, while with a coaxial pipe - only up to 30 kW.

Boiler Navien Deluxe 24K with channel separator

Line of gas boilers Navien with open combustion chamber represented by models with a capacity of 13, 16, 20 and 24 kW for space heating from 30 to 240 m2. They are marked Navien Ace 13-24 A.
The symbol "A" tells us that this device is atmospheric, and the numbers - about its power. On boilers of this type there is no fan (turbine), and the output of combustion products occurs by natural draft.

An atmospheric boiler can be purchased if your home already has a chimney, such as asbestos-cement pipes, sandwich pipes, or brick pipes. It will simply be necessary to purchase separately pipes made of steel (preferably stainless steel), and bring them into an existing chimney.

The diameter of the nozzle on the boiler is 130 mm. This is important to remember, because it is impossible to narrow the chimney.
And, if, for example, you have an asbestos pipe with an inner diameter of 100 mm, then it will have to be replaced with pipes of a larger diameter. Otherwise, the boiler will not work correctly and will quickly fail.

The device of double-circuit gas boilers brand Navien

Like most modern double-circuit wall-mounted gas boilers, South Korean-made boilers are equipped with:

The device of a double-circuit gas boiler Navien Deluxe Coaxial

- the main heat exchanger for heating water in the heating system;
- secondary heat exchanger for heating hot water;
- circulation pump;
— membrane expansion tank;
- electronic board ("brains" of the boiler);
- burner assembly;
- safety group (air and safety valve, pressure gauge, sensors);
- a three-way valve for switching the operation of the circuits;
- turbine (for versions with forced draft).

Design features of double-circuit boilers Navien

1. Navien boilers have two separate heat exchangers: one for heating, the second for running domestic water. An important feature is that both heat exchangers are made of stainless steel.

Then, like most competitors, only the secondary heat exchanger is made of stainless steel, and the main one is made of copper, or there is only one bithermic copper heat exchanger for heating both circuits. Stainless steel in itself guarantees a long service life of a gas boiler.

2. Another important point is that the company produces all the elements of the boiler itself. Both the pump and the membrane tank and heat exchangers are produced in South Korea. Unlike, say, many others, in which parts from different manufacturers are often installed.

3. The electronic board of the Navien boiler has a special built-in chip to protect against power surges. The same protection of the “brains” of the boiler is provided only on wall-mounted gas boilers made in Germany, but the heating equipment of this brand belongs to a different price category.

But, despite this chip, experts still recommend buying it, given our Russian realities, when the range of power surges in the mains can be quite decent.

4. And finally, the most noticeable distinguishing feature of Korean manufacturers is remote boiler control unit Navien. This is such a special "box" that has a digital display and buttons for controlling the operation of the boiler.

Boiler control unit Navien

The display shows information about any malfunction and error during the operation of this equipment, the set temperature of water, coolant, air, as well as time. Using the buttons, the operation parameters are manually set: mode, temperature, turning the boiler on and off.

A very important point is the presence in the control unit of a built-in room temperature sensor. Usually, from other manufacturers, this sensor is considered as an additional option, and is purchased for a fee.

The "Koreans", however, it comes with a boiler. And you don’t even need to buy wires: they are already on the boiler and on the block. The difference is made by boilers of the series Navien Prime and Navien Deluxe Plus. The control unit here is built into the body of the device and, as a result, there is no ambient temperature sensor.

Connection and installation of the Navien boiler

Like all wall-mounted double-circuit gas boilers, the "Koreans" have 5 fittings at the bottom of the body for connecting water and gas. The order of fittings from right to left: gas connection, running water inlet and outlet, coolant inlet and outlet.

The diameter of fittings for domestic water is 1/2 inch, gas and coolant 3/4 inch.
Be sure to install on each supply pipe.

Between the boiler and the wall on which it will hang, it is necessary to install a stainless steel protective screen measuring 1000 by 600 mm for fire safety purposes. Also, for the correct installation of the boiler on the wall, a special mounting plate is included in the package.

Connecting the gas boiler Navien Deluxe Coaxial

Advantages of Navien boilers:

— good price-quality ratio;
- two stainless steel heat exchangers;
- the presence of a remote control unit with a built-in air temperature sensor;
- the presence of a protective chip against a power surge;
- a wide range of models and colors;
- cheap spare parts.

Disadvantages of Navien gas boilers:

- noise during operation;
— Fit only native spare parts;
is an Asian brand.

So, we reviewed the range of Korean wall-mounted double-circuit gas boilers Navien, their differences, dismantled the external and internal structure of the boiler. Watch a video review of the boiler.

Looking at the technical specifications, as well as reviews of owners and specialists, Korean-made Navien boilers are perhaps the best for choosing heating equipment today, if we take into account such a parameter as price-quality. In general, this is a very worthy and inexpensive device for a modern heating system in your private home.

The popularity of autonomous heating is growing not only among residents of private houses, but also among apartment owners. This trend is associated with the positive qualities of modern boilers, the convenience of their installation and operation.

Among the mass of the proposed range, the demand is high atmospheric gas boiler Navien, we will describe further the principles of operation, the causes of malfunctions and how to eliminate them.

The South Korean association Kyung Dong Navien has long been present in the market of heating and water heating equipment. The main products of the company are gas boilers.

Did you know?Initially, Navien's equipment ran exclusively on natural gas, but over time, models adapted to work on liquefied gas began to be developed.


The corporation firmly holds its leadership in the market due to the fact that each Navien gas boiler is adapted to work under various operating conditions (including in the post-Soviet territory), it has an acceptable price and good technical characteristics. Today the company offers:
  • heating equipment for floor and wall mounting;
  • models with open and closed combustion chamber;
  • double-circuit and single-circuit boilers;
  • a wide range of power options.

In terms of the correct choice, Navien boilers should be divided according to power, and therefore - according to the volume of the room. From here comes the division into floor and wall models.

Important! The lower the boiler power, the smaller the heated area.

What are the advantages of Navien Ace boilers

Navien Ace is a double-circuit version of a wall-mounted boiler. It is equipped with an open combustion chamber with a natural release of combustion products. The instructions for their operation speak eloquently about the advantages of Navien boilers - they work even under conditions in which competitors' equipment fails.

Did you know? To increase the service life of Navien boilers, they are made of stainless steel, since stainless steel has a fairly high thermal conductivity.

Among the main advantages of Navien Ace boilers, it should be noted:

  • universality;
  • simplicity of control commands;
  • compactness;
  • high-quality anti-corrosion material was used in the production;
  • fully electronic, Russified control system;
  • compliance with high European standards (quality, comfort, safety);
  • reliability and resistance to various conditions (voltage surges up to 30%);
  • the ability to work in a frankly emergency situation (low pressure of gas and liquid coolant, low-quality gas, unstable pressure in the water supply system);
  • economical fuel consumption;
  • environmental friendliness (mostly carbon dioxide is emitted);
  • acceptable price.
Important!In the event of power surges in the power supply, the SMPS function is activated in the unit, and the boiler continues to operate smoothly.

Complete set and principle of operation of the Navien Ace boiler

If we consider the Navien Ace wall-mounted atmospheric gas boiler from the technical side, then this model cannot be called simple. This is, in fact, a mini-boiler room, which includes:

  • circulation pump;
  • automation block;
  • universal separate heat exchanger;
  • expansion tank;
  • various shut-off valves.


Since most models of wall-mounted boilers use a closed combustion chamber, they are equipped with turbocharging and a coaxial (pipe-in-pipe) chimney.

The power of Navien Ace boilers depends on the model and varies between 7-40 kW. True, there are no special differences in the principle of operation of the Navien boiler - it operates according to the classical scheme, which uses a combustion chamber, burner and heat exchanger.

Important! The APS mechanism, on the basis of which the double-circuit version of the Navien boiler operates, ensures uninterrupted combustion and gas savings. A speed-controlled fan ensures safe combustion.

The most popular models of wall-mounted boilers Navien Ace

The most reliable Navien boilers, the operation of which can only be found positive reviews, are distinguished by an optimal price-quality ratio. They are divided into two categories:

  1. Ace ATMO. Traditional boiler with an open combustion chamber. Equipped with atmospheric removal of combustion products.
  2. Ace TURBO. Advanced boiler equipped with a turbocharged burner and a special SMPS control system that regulates the process of gas combustion.
Important! Navien Ace gas boilers can operate both in automatic and manual modes, which allows you to more accurately set the parameters of the boiler and eliminate errors in operation as much as possible.

What to look for when installing Navien Ace boilers

Since detailed Russified instructions are attached to the Navien boiler, there are no special problems with its installation and launch - you can mount the equipment yourself.

However, experts advise paying attention to the combustion products removal system. They can be discharged through a standard chimney or installed as a separate structure. If the indicated methods of exhaust gases are not suitable, a coaxial chimney can be installed.

Important! Coaxial chimneys can be used in rooms whose area does not exceed 110 sq.m with a boiler power of not more than 11 kW.

The most common malfunctions and elimination of problems in the operation of the boiler

With its functionality and provision with electronics, there are certain disadvantages and malfunctions that can be encountered during the operation of the Navien Ace boiler.

Most often, users are faced with a problem when the unit stops working, and the electronics signal a critical error. This situation can be caused by various factors, including the sensitivity of the sensors. The most common mistakes:

  • Smoke removal. Fault code "10" indicates problems with the removal of combustion products. Possible causes: turbine malfunction, pressure sensor tubes connected incorrectly, chimney clogged, nozzle too long.

If none of these causes are identified, and the Navien Ace boiler continues to signal an error, then normal gusts of wind may be the cause. You can solve this problem by redoing the chimney. As a quick response option, you can open the boiler body and disconnect the air supply hose. However, this measure is temporary.
For common mistakes on the Navien gas boiler, see this video:

Important! The manufacturer recommends installing boilers with the chimney exit on the leeward side.
  • Flame sensor failure. Fault code "03" may indicate poor gas quality. The problem can only be solved by elimination. First of all, the cleanliness of the gas supply nozzles is checked. If they are in order, you need to choose the optimal position of the controller electrode (it must be in the hot phase of the flame).
  • Equipment overheating. Fault code "01". A possible cause is a blockage in the heating system, a malfunction of the circulation pump, or a decrease in flow. Ways to solve the problem: check the system and filter for the presence of air, check the health of the pump and the resistance of the coil for a short circuit, check the impeller in the circulation pump.
  • Navien gas boiler is working, There is heating but no hot water. Error code "02". There is a jump in water temperature on the remote control (it rises sharply to a maximum and instantly drops). There may be a blockage in the hot water system. The reasons may be: lack of pressure in the water supply system, airiness of the system, the circulation pump cannot gain momentum, the distribution valve is closed, or the flow controller does not work. To eliminate this malfunction, first of all, it is necessary to adjust the pressure, bleed the air in the system, check the resistance of the pump coil and the impeller for damage, open the boiler distribution valve, disassemble the regulator housing and clean the box.

In addition, when hot water is turned on, the Navien boiler may hum or make an incomprehensible noise. At the same time, there is no error information on the display and the pressure is normal. As a rule, this is due to clogging of the heat exchanger. To fix the problem, you can clean the heat exchanger or replace it.

Did you know? It is best to choose boilers that are equipped with smooth adjustment - this will allow you to change performance depending on the air temperature.

Navien Ace gas boilers are distinguished by high quality and reliability in operation. However, the duration and features of operation depend on how correctly you were able to install and configure the Navien Ace boiler, as well as on the quality of the fuel used.

Gas heating equipment of the Korean manufacturer Navien is represented by double-circuit boilers, including condensing ones. Its design advantages include the presence of two heat exchangers made of high-quality stainless steel, a remote control unit and the possibility of modulating the burner power. The entire range is certified, a protective chip against voltage surges is mandatory, it is allowed to start at low pressure in the supply gas and water supply.

The hallmark of Navien gas boilers is the anti-freeze function, the heating system effectively responds to sudden changes in ambient temperature. The feedback from the owners is mostly positive, the shortcomings include noise (only for models with a Coaxial chimney) and low maintainability (in case of malfunctions, only spare parts from the manufacturer are suitable). In general, this is an affordable technique, you can buy it without any problems in any store, the minimum warranty period is 2 years.

Brief description

1. Navien Smart 30K.

Lightweight wall-mounted gas boiler with a hot water circuit for servicing an area up to 300 m2, runs on natural and liquefied fuels. It is characterized by high performance: when heated to 25 ° C - up to 17.2 l / min, up to 40 - 10.8, this is enough to meet the needs of an average family. The model is designed to operate at power surges and pressure drops in the gas main, including the operation of the water heating circuit. If desired, the heating mode is selected according to the temperature of the incoming or return coolant, a three-stage power adjustment, this made it possible to reduce fuel consumption in comparison with analogues (the range declared by Navien is from 1.27 to 3.23 m3 / h, the owners' reviews confirm it). The turbocharging system is Coaxial modulated, the efficiency of the boiler reaches 90.9%. The control is fully automated, the outside temperature data is taken into account, the parameters are changed remotely using a smartphone or a remote control.

2. Navien Deluxe 10K.

Double-circuit boiler with wall placement with frost protection and a Coaxial turbo fan under the firebox. This model is characterized by high efficiency (up to 91.2%), average DHW capacity - no more than 11.5 l / min, and economical gas consumption - natural from 0.75 to 1.16 m3 / h, liquefied - 0.63- 0.97 kg/hour. The control system is automated, the control panel is fully Russified. The entire Navien Deluxe series is adapted to work in conditions of frequent power supply voltage fluctuations (a chip with a response threshold of ±30% of 230 V is installed). Both circuits are active even at low pressure in the incoming water pipe (up to 0.1 bar). The presence of a turbocharged fan allows you to optimize the "fuel-air" ratio and reduce heat losses from the outgoing combustion products.

3. Navien Ace 24.

Sales leader Navien, according to reviews, this boiler from Korea is trouble-free even with unstable parameters of gas and water in the supply lines, often observed in our realities (for example, apartment buildings). An anti-freeze system is provided: when the gas boiler is turned off, the pump circulates the coolant, and when the temperature drops to -6 ° C, the burner automatically starts. The installed air pressure sensor allows you to optimize fuel consumption: it takes no more than 2.47 m3/hour to heat a room up to 240 m2 and meet the needs of hot water supply. The Coaxial chimney is not included in the standard kit (there are exceptions, but according to reviews, this should be clarified), to organize the forced removal of combustion products, it must be purchased separately.

4. Navien GA 17KN.

Floor double-circuit gas copper. Optimum in conditions of low gas pressure and water pressure, the performance when heated to 25 ° C reaches 9.8 l / min. The efficiency of this is 91%, due to the rational arrangement of steel heat exchangers, the fuel consumption is minimal - no more than 1.67 m3 / h with a thermal power of up to 1.7 kW. By analogy with the above-mentioned Navien gas heating boilers, this model provides reliable protection against freezing (it reacts to a sharp change in the temperature of the heated space) and voltage surges. A feature of Navien GA 17KN is a universal smoke exhaust system - the hole can be installed in the outer wall, it is not necessary to lead the pipe vertically. The remote control panel is Russified, it is possible to control the parameters of water heating.

5. Navien NCN 21KN.

A wall-mounted condensing gas boiler, due to the use of the heat of the outgoing combustion products, the efficiency of the device reaches 98-108%. This is an environmentally friendly heating technology, flue gases contain a minimum of hazardous substances compared to conventional two-circuit models with the same performance. The generated volume and speed of hot water supply is above average: 14 l / min when water is heated to 25 ° C, 8 - to 40. At the same time, Navien condensing boilers are not inferior in terms of safety to other varieties: there is a system of protection against freezing, power surges. Successful operation is allowed at low pressure of the energy and heat carrier in the supply lines.

Another feature of this Navien model is the ability to control power over a wide range: from 4.8 to 19.3 for the heating circuit, which leads to savings in gas consumption. For comparison: in the minimum mode, the gas boiler consumes 0.52 m3 / h, in the maximum mode - up to 2.09, while a rather significant heating area is covered - up to 190 m2. Savings are 30% or more, this is achieved both by modulating the heat output of the burner (from 20 to 100%), and thanks to climate control, which monitors temperature changes not only in the room, but also outside it. User reviews confirm the payback of this unit, maximum efficiency is observed when it is installed in low-temperature heating systems.

6.Navien Prime 13K.

Wall-mounted gas boiler with a remote return line sensor that monitors changes in weather conditions. The presence of a climate control system allows you to reduce fuel consumption and save heat exchanger resources. This characteristic for natural gas lies in the range of 0.75-1.4 m3 / h, liquefied - 0.63-1.16, the delivery of hot water reaches 13.8 l / min. The kit includes a remote control with a voice assistant, control is available to people with visual problems. The series is protected from voltage surges and is suitable for operation in domestic conditions.

Buyer opinions


“I chose the gas Navien Deluxe 24K as the main heating device for the cottage due to the impossibility of allocating a separate room for the boiler room, the wall model just fit. During the operation did not reveal any particular shortcomings or malfunctions. The disadvantages include dependence on the mains and specific noise - the greater the power, the stronger the rumble of the boiler.

Egor, Yekaterinburg.

“I decided to buy Navien Ace to replace a failed gas boiler, after wintering I noticed a slight decrease in gas consumption, convenient and accurate automation. During the year of operation, he stopped for no particular reason twice, after which he restarted manually, and did not understand what it was connected with. The chimney is noisy, but you can’t hear it behind the closed door, I didn’t find any obvious minuses or shortcomings. ”

Sergey Trofimov, Moscow region.

“I consider Navien boilers a good investment, this equipment from Korea is better suited for our conditions than European models, and it consumes gas more economically than Russian ones. Of course, they are dependent on electricity, but the same can be said about any heating circuit with a circulating pump, and the fans consume a little. Noise is called a generally recognized disadvantage, but they are located in a convenient place for the owner, the main thing is that the lighting is normal.

Dmitry, Novosibirsk.

“I installed the Prime 13K boiler from Navien at home, there are enough resources for efficient heating of all rooms and hot water for a family of three. I liked that the thermostat was included in the basic kit, I did not have to buy it separately. Malfunction signals are displayed, the control system is Russified, there are no problems with starting and maintenance.”

Denis, Moscow.

“I have been using a condensing double-circuit gas boiler of the Navien brand for heating and hot water needs for more than a year, during the operation I did not reveal any malfunctions. The cost of the model is one and a half to two times higher than the usual wall counterparts from Korea, but it is worth buying if you need a significant consumption of hot water. I advise you to connect the boiler through a stabilizer, in my area, for example, power surges exceed the 30% specified in the instructions.

Andrey, Rostov-on-Don.

Price

Gas model name Navien Heating area, m2 Dimensions, mm Weight, kg Heating power, kW Price, rubles
Smart TOK 30K ART 30K Up to 300 695×440×265 29 12-30 47900
Navien Deluxe 10K Up to 100 28 7-10 24150
Ace 24 Atmo up to 240 720×430×340 27 9-24 28800
GA 17KN Up to 170 856×362×621 64 17 39950
NCN 21KN Up to 190 695×440×370 35 4,8-19,3 63200
Prime 13K Up to 130 695×440×265 28 7-13 37850

* the weight of the boilers is indicated without water.

It is well known that South Korea is a high-tech country that supplies the widest range of modern household appliances around the world, including the states of the former USSR. And more recently, this list has been replenished with heating equipment running on natural gas. We present to your attention a product of a well-known Asian brand - the Korean gas boiler Navien, which has been sold in the Russian Federation for several years and managed to gain a certain positive reputation.

Model range of wall-mounted boilers Navien

It should be noted that the first reviews of Russian users about this product were not too enthusiastic. There are objective reasons for this, one of them is frequent leakage of connections, which was eliminated by replacing an expensive set of gaskets. Another trouble was that the Navien Ace boiler offered at that time pestered users with a late start-up of the burner, when the coolant in the batteries had time to cool down pretty much.

The company has clearly worked on the bugs, as there are much fewer negative reviews, and the number of supporters of the South Korean manufacturer has grown significantly, primarily due to the reasonable price of decent quality products. At the moment, under the Navien brand, 3 types of suspended gas heat generators are offered:

  • atmospheric;
  • turbocharged;
  • condensation.

The atmospheric series of units with an open combustion chamber is represented by the Navien Atmo brand boiler, which replaced the not-so-successful Ace model. The heat generator is adapted to difficult operating conditions, which is reflected in the low operating pressure of gas (from 8 mbar) and water in the centralized network (from 0.6 bar). The series includes 4 boilers with a capacity of 13, 16, 20 and 24 kW, equipped with a copper heat exchanger for heating and a separate stainless steel one for heating water for domestic hot water needs.

Note. Only double-circuit boilers Navien are supplied to Russia and the CIS countries, both in wall and floor versions. In addition, all Navien units are equipped with modulating burners, an integrated expansion tank and circulation pump, as well as an electric ignition system.

The unit is controlled automatically by means of a remote control. In addition to the minimum set of protective automation, the boiler has an additional system that prevents the coolant from freezing. At the same time, the manufacturer prohibits filling the heating system with antifreeze, the heat generator is not suitable for this. The main specifications of the Atmo series are as follows:

  • water heating temperature in the heating system - 80 ° C, operating pressure up to 3 bar;
  • in the DHW circuit, water is heated up to 60 ° C;
  • gas pressure - from 8 to 18 mbar;
  • Efficiency - 86%;
  • water pressure in the network - from 0.6 to 8 bar.

Turbo models

The line of wall-mounted boilers Navien with a closed combustion chamber includes as many as 3 series of units:

  • Deluxe - 7 heat generators with power from 13 to 40 kW.
  • Prime - 6 products with a capacity of 13-35 kW;
  • Smart TOK - 6 heaters from 13 to 35 kW.

For reference. The hanging boiler Navien Ace Turbo is a thing of the past, and its place is taken by the Deluxe and Prime brand units.

The difference between supercharged heaters is that the air supply to the closed combustion chamber is carried out forcibly by means of a fan, its performance is controlled by the controller. Air entering through the coaxial chimney from the street enters the sealed housing, where it is captured by the fan. Thanks to forced injection, all these models have an increased efficiency of 92%.

This is where the fundamental differences between turbocharged units and atmospheric ones end. Their equipment is just as rich: the Navien Deluxe wall-mounted gas boiler is equipped with an expansion tank, a pump and an additional heat exchanger for hot water. In addition, the device withstands voltage drops of ± 30 V from the nominal value, and also automatically turns on heating when the coolant temperature drops below 6 ° C, bringing it to 21 ° C.

The Prime series, as well as the Deluxe Coaxial boiler, is equipped with a closed combustion chamber and other functional elements listed above. The difference is in the additional weather-compensated automation module that controls heating depending on environmental conditions. The SmartTOK series is even more automated, these boilers can be controlled remotely via the Internet. To do this, you need to have a smartphone and download a special application to it.

Condensing heat generators

Unlike the modifications discussed earlier, the Navien NCN and NCB boiler heat exchanger is made of stainless steel and is designed to take away not only direct, but also latent heat released during gas combustion. Hence the high efficiency of the units, the manufacturer declares it at the level of 98%. The complete set of products is the same as for turbocharged boilers, only the controller has an extended number of functions, for example, programming the climate in the house for a week in advance. The NCN series consists of 4 products with a heat output range of 21-40 kW, NCB - of 4 heaters from 24 to 40 kW.

As for the technical characteristics, in condensing heat generators, hot water for the heating system can be heated up to 90 ° C, and for hot water - up to 65 ° C. The maximum water pressure in the centralized network has also been increased, the boiler can withstand up to 10 bar. The air supply is forced, it can be carried out both with the help of a coaxial and a separate chimney. That is, the homeowner can choose whether to take air from the street or from the boiler room.

Floor standing boilers Navien

This type of heat generators is positioned by the manufacturer as universal, they can operate on diesel fuel and natural gas. In fact, Korean floor-mounted gas boilers are just as well stuffed with automation as their wall-mounted counterparts. The difference is in the installation method and the maximum power of some models. The line includes 4 series:

  • LST, 8 products from 13 to 60 kW.
  • LFA, 6 heaters from 13 to 40 kW.
  • GA, 7 boilers with a capacity of 11-35 kW.
  • GST, 5 units from 35 to 60 kW of power.

In terms of technical characteristics, they are also close to suspended ones, the maximum operating temperature is 80 ° C, pressure - 3 bar. Efficiency index - 91%, air supply method - forced injection.

How to turn on the Navien boiler

A feature of South Korean heaters is the presence of remote control panels, which are supplied with all products. The attached instruction manual states that the boiler can be turned on either using the remote control or using the buttons on the front panel of the unit. This operation is simple: you need to press the "power" button, its location is shown in the diagram:

After starting, the boiler will automatically start working in the mode that was last set on the remote control. To change the settings, you need to take the manual and use it to correctly set all modes. Before starting a new heat generator, you need to install it, connect it to all engineering networks and fill the heating system with water, focusing on the boiler pressure gauge. The location and purpose of the nozzles is shown in the figure:

Navien boiler errors

During start-up and operation, various error codes may appear on the display of the device, indicating a malfunction of the boiler or malfunctions in the heating system. The decoding of all codes is given at the end of the instruction manual, but not always in an understandable language. We will give an explanation of frequently occurring errors.

If the boiler stops and error 02 appears on the display, this indicates that the flow sensor has been triggered in the heating system. The reasons may be:

  • the circulation pump is out of order or disconnected from the power supply;
  • there is air in the system;
  • the filter at the coolant inlet to the boiler is clogged;
  • there was a leak, and make-up does not work;
  • the sensor itself or its electrical circuit is faulty.

When the unit does not start, and error 03 is on the screen, the cause is in the flame sensor. It works if it “does not see” the fire, which means that there may be problems with the gas supply or its pressure is too low. Also, the cause may be contamination of the ignition electrodes or the surface of the sensor. The failure of the sensor itself or the absence of a signal due to an open circuit cannot be ruled out.

Conclusion

South Korean Navien boilers using natural gas have become familiar to many users, although they have appeared relatively recently. In general, their work is characterized positively, but there are significant shortcomings. For example, a ban on the use of antifreeze in the system, which is very important in harsh winter conditions.

If you choose a heating system for your home, then you should look at the Korean Navien Deluxe gas systems at a very attractive price. The Navien gas boiler is a reliable and durable device that is unpretentious in use. Only Korean materials are used in the manufacture. The Navien gas boiler has proven itself and is considered an ideal example of good quality and low price.

The country has developed service centers that service Navien double-circuit gas boilers, so with the slightest malfunction, you will always receive fast and qualified assistance. The Korean brand Navien is considered the leader in the manufacture of heating systems in Asia. The quality control mechanism, which is used at the plant where Navien double-circuit gas heating systems are manufactured, meets the most stringent quality standards.

Heating boiler Navien: sales leader

Navien gas boilers are leaders in the field of heating and water heating devices. Navien offers only high-tech solutions for any premises. In the heating systems market, you will always find a device that will serve you for a long time at a very low price. Navien wall mounted gas systems are designed for heating apartments and small private houses.

Deluxe brand Navien are household double-circuit boilers with open and closed combustion sections. They heat and heat water for domestic and technical purposes. All automation is in Russian, which allows not only to correctly read the instructions, but also save on heating and constantly maintain the optimum temperature in the room. Reliable and safe operation of the boiler performs its functions even with regular power failures. If the mains voltage fluctuates, the SMPS protective function is activated in the systems and then the mechanism works smoothly. That is why such wall-mounted double-circuit boilers have a long service life and protect the owners from breakdowns and further repairs.

Even with minimal gas pressure, you can use heating and hot water. A strong protection system prevents the owners from freezing. If the media temperature drops, the frost protection mechanism is automatically activated and the circulation pump starts to operate. The system provides reliable and uninterrupted circulation of the heat carrier. You can use hot water even at low pressure.

Wall-mounted double-circuit boiler Navien works great with low water pressure up to 0.1 bar, so it is widely used in residential areas with minimal water pressure in the water supply, as well as with constant power failures. The buyer receives a long service life of a wall-mounted double-circuit boiler, thanks to a heat exchanger made of reliable steel, which prevents rust and corrosion.

The Navien wall-mounted double-circuit boiler works on the basis of the APS mechanism, which guarantees stable combustion and reduces costs for gas. The mechanism controls the amount of gas that enters the burner, ensuring total combustion of the fuel, reducing its consumption. The fan with control of speed of rotation promotes safe burning. Therefore, the Navien wall-mounted double-circuit boiler can be used in apartment buildings. The convenient location of the APS mechanism prevents condensation.

Features of the Navien boiler design:

  • circulation pump;
  • universal separate heat exchanger;
  • automatic control system;
  • the ability to operate the boiler on natural and liquid gas;
  • convenient choice of heating mode. You can choose any temperature that will be present in the house;
  • timer function. You can set any time to stop the boiler. The Navien boiler will work for half an hour during the set time with a further shutdown. If you set the time to 4, then heating will be performed for four hours for half an hour;
  • with one function can save fuel and, at the same time, to maintain the temperature at the moment when you are not at home.

Advantages and disadvantages of Navien gas systems

Navien gas boilers have a number of advantages, namely:

  • frost protection device. When the room temperature drops, the system automatically activates the anti-freeze protection mechanism. If the water temperature drops to 10 degrees or below, circulation pump starts automatically, which ensures uninterrupted circulation of the heat carrier in the heating device. If the water temperature drops below 5 degrees, the burner automatically starts to work and the heat carrier warms up to 22 degrees;
  • control of the turbocharging system. The turbocharging fan, which is located in the Navien Ice Turbo boilers under the combustion chamber, changes the speed of the counter. It moves from the APS air pressure mechanism. Thus, air enters the combustion chamber of the system in an amount proportional to the amount of gas supplied. Only such a device for the operation of the Navien Ice Turbo system with an installed fan under the combustion chamber and the use of the APS mechanism allows for total combustion of gas and minimal heat loss;
  • stainless steel heat exchanger. Compared to copper, it is highly resistant to rust and corrosion. And this greatly extends the service life. Despite being resistant to rust, the stainless steel heat exchanger not widely used in boilers, since the heat conductivity is much less than that of a copper heat exchanger. And only in Navien Ice Turbo boilers can a modulated turbocharging system be used to increase the efficiency of the system;
  • durable and safe operation of the system in case of constant failures. The SMPS mechanism installed in the microprocessor protects the system from power failures. Only the Navien boiler works without significant drops. So the service life of the Navien system is much longer than other devices;
  • an amazing opportunity to use heating and hot water at low pressure;
  • the device works great with low water pressure;
  • amazing heating technology.

A portable system control distance with a built-in temperature mechanism helps not only save on gas consumption, but also significantly reduce heating costs. Therefore, your home will always have the optimum temperature.

The disadvantages of Navien gas boilers include a permanent connection to the network and, despite protection, the high sensitivity of sensors to voltage failures. To solve this problem, different stabilizers and batteries are used.

ATMO model

Navien ATMO gas boilers have a system for removing emerging vapors through a simple chimney. This design adapted to work in extreme conditions with strong changes in the voltage and pressure of the gas pipeline.

HSN model

This is Navien's most modern gas boiler, which has high performance through the use of steam temperatures. The heated condensate is collected in a heat exchanger, which heats the water flow. Thus, the costs of sources and energy carriers for heating the heat and water exchanger are reduced.

How to install a wall hung boiler?

So, you have purchased a gas boiler, installed a gas pipeline, installed heating, and now it remains to assemble everything into one system. Connecting any gas boiler is not a very easy task. And it's not even that such the system is a high-tech device, the problem is a little different - each device has its own connection method. Therefore, the installation of the boiler must be carried out by qualified specialists.

Before installing the boiler, if it does not have the necessary equipment, you must buy:

  • temperature emergency mechanism;
  • power device;
  • thermometer;
  • pressure mechanism;
  • fuse.

Usually all boilers are equipped with such a complete set.

When installing heating systems with an open combustion chamber, you must have a separate room. Its area should be 4m2 or more, and the ceiling height should be 2.5 m. There should also be a ventilation system. When installing heating systems with a closed combustion chamber, such requirements do not apply. If you are installing a system need to have an outlet with automatic safety switch. It is important to connect the stabilizer. The boiler is grounded. If the wall on which the boiler is installed is not resistant to fire, then it must be sheathed with protective material. After getting holes between the pipe and the wall, they need to be sealed with cement mortar. Before connecting the thermoblock, check that there is no debris in the slots.

Connecting the heating system is a complex process that must be carried out by specialists. If you want to buy a Navien gas boiler, then everyone will be satisfied with its low cost, and even free installation will pleasantly surprise you.