The interior of the dressing room with their own hands. Dressing room design: photo of ready-made solutions. Features of the interior design of the dressing room

A functional bath, equipped with everything necessary for wellness procedures, is the object of desire for many land owners.

The dressing room in the bath is an important part of the structure, which not only prevents the penetration of cold into the steam room, but also allows you to fully enjoy the bath rest.

What is the antechamber used for?

A well-equipped dressing room can become a full-fledged functional room in any bath. As a rule, it is located between the steam room and the sink, so it is used:

to protect against cold and drafts penetrating into the premises;
for relaxation after procedures before visiting or;
for changing underwear and clothes that can be conveniently hung up and not worry that they will get wet;
for spending leisure time in a warm friendly atmosphere.

If the finished bath is not equipped with a dressing room, then you can expand the structure quickly and economically. Considering in more detail the question of how to make a dressing room, it is recommended to choose a frame construction method.

The main advantages of the method are:

ease of erection of the frame at minimal cost for the foundation;
construction speed;
a wide choice of materials for internal and external arrangement;
high heat capacity of the building.

Construction of the foundation for the dressing room

Prior to the start of construction work, a working scheme is selected and the size of the dressing room is determined. The area of the room is calculated according to the following principle: 1.35 sq. m per person. The width of the dressing room must be at least 100 cm, the length is arbitrary.

For a frame structure, a lightweight base is suitable - pile or shallow.

How to build a shallow foundation? The work is carried out as follows:

Prepare a building plan.
Prepare a trench with the desired parameters: 55 cm deep, 35 cm wide.
The base for the foundation is filled with fine sand, rammed, moistened.
Formwork is made from boards according to the size of the foundation.
Install the reinforcing base under the foundation.
Fill the formwork with concrete mix.
The concrete base is dried and protected with a waterproofing layer of roofing material.

Construction of a frame structure

Before installing a wooden structure, all elements are carefully treated with protective and antiseptic compounds for wood.

The assembly is performed in the following sequence:

Installation of the lower trim of the bars with a section of 10 × 10 cm.
Installation of corner posts, checking the correct installation of each element using a level.
Installation of intermediate racks in compliance with a step of 80 cm.
Making the upper strapping from bars with a section of 8 × 8 cm.
Installation of diagonal strips in the outer corners to increase the rigidity of the finished structure.
Fixing a log for a floor from an unedged board.
Installation of elements under openings for doors and windows.
The inner lining of the finished structure is membrane material, which provides protection against the penetration of wind and moisture.
External wall cladding.

Installation of the ventilation system in the dressing room

Ventilation in the dressing room is an important element that will provide the necessary inflow and outflow of air in the room. This is required to maintain a favorable climate inside the bath and maintain an optimal heat transfer regime.

The ventilation ducts for the dressing room are equipped as follows:

At a distance of 55 cm from the furnace of the stove, we make a small hole measuring 16 × 21 cm.
We prepare a wooden damper of the required size, on the front side we attach a bar with a handle.
On the side opposite the ventilation duct, we make another hole of the same size at a height of 200 cm from the floor level.
We equip the second hole with a similar damper.

The dampers for ventilation ducts must always be closed.

How to insulate the dressing room correctly in order to maintain the required temperature regime between and other functional rooms? In this case, all surfaces are subject to insulation: walls, ceiling and floor.

Features of floor insulation

A functional bath with a warm dressing room is equipped with a base that is resistant to high humidity.

To make a warm wooden floor, it is enough to install expensive heating systems - water or electric. An affordable option is to use inert floor insulation materials - wool and extruded foam.

Floor insulation work is carried out according to the following algorithm:

We install bars for the rough base on wooden logs.
We cover the bars with a membrane for vapor barrier.
We lay the insulating material under the logs, tightly fix it to the frame.
We lay the waterproofing with an overlap and fix it with construction brackets using a stapler. We protect the connecting joints with adhesive tape on a metallized basis.

The wooden base under the floor is treated with antiseptic compounds to prevent possible rotting and destruction of wood.

Specifics of ceiling insulation

The insulated ceiling reduces heat losses and provides a comfortable indoor climate. To warm the surface, basalt wool is used. Additionally, work is underway to vapor barrier the ceiling.

The warming process is carried out as follows:

A layer of insulating basalt wool is laid between the ceiling beams.
On top of the insulation, foil-based polyethylene is overlapped. For fixing to the beams, thin strips are used.
The joints are closed with adhesive tape.

If during the operation of the bath the attic space is not involved, then in the dressing room the ceiling surface can be made into a flooring. Sawdust, clay or expanded clay chips are suitable as a heat-insulating base.

The subtleties of thermal insulation of walls

For internal insulation of the walls of the log dressing room, foil foam or mineral wool is used.

All work on internal wall insulation is carried out in the following sequence:

Installation of a membrane vapor barrier on wall structures.
Installation of a wooden crate made of bars with a section of 5 × 5 cm, observing a step of 55 cm. Prior to installation, all elements of the crate are carefully treated with antiseptic compounds.
Mineral wool flooring between the elements of the crate.
Laying polystyrene foam on a foil base and fixing to the crate using staples and a construction stapler.

The next stage is the summing up of communications and the laying of electrical wiring in a plastic corrugation.

After the completion of the insulation work, you can proceed to the interior decoration of the room. The traditional interior of the dressing room involves the use of natural materials - wooden lining or grooved boards. Do not forget that it should be combined with the general design style of other bath rooms.

Decorative floor finish

The next stage in the arrangement of the dressing room is the flooring. Moisture-resistant wood species are suitable for finishing - larch, oak and cedar. Before starting work, all materials are treated with antiseptic impregnation to prevent rotting and destruction of wood fibers.

Work is performed in the following order:

Lathing bars are mounted on the waterproofing layer with a step of 40 cm.
The board is installed on the crate of the "thorn and groove" type with fixation on self-tapping screws near the walls.
A protective rubber coating is laid over the lining.

Sheathing is carried out as follows:

A control crate is installed on the ceiling surface to fix the lining.
Mount the initial element against the front door with a small nail at an angle (45 degrees).
Check the level and install the following items.
Bars up to 4 cm thick are fixed to the insulating layer.
Carry out the installation of lining on the walls, starting from the far corner, using a hidden method.
After installation is completed, platbands and skirting boards are mounted.

Important! Finishing the dressing room allows you to perform vertical, horizontal or diagonal installation of lining.

The photo shows how stylish the lining looks on the wall surfaces in the finished room.

The interior and exterior decoration of the dressing room should harmoniously complement each other. In the constructed design of the dressing room, it is enough to perform external caulking, grinding and wood processing with special protective compounds.

The dressing room is the second most important place in the bath after the steam room. Here a person is resting and how comfortable he is equipped will depend on a good mood. Finishing the dressing room is a crucial moment, here you need to take into account many nuances, from the right choice of materials to interior design.

The main, but not the only function of the dressing room is to prevent the penetration of cold street air into the steam room. In addition, it serves as a storage place for bathing utensils, and if space permits, then a certain supply of firewood.

To relax after the bath procedures it was good and comfortable, again, you can’t do without a dressing room with installed benches, a table and clothes hangers.

Material for the interior decoration of the dressing room: selection rules

The dressing room is not a simple room and special requirements are imposed on it. And it is on them that you should be guided when starting to finish. The slightest mistake can reduce the quality of the effect of bath procedures and reduce the life of the bath as a whole. More frequent repairs required.

Requirements:

The width of the room should not be less than 1 m, and one visitor should have at least 1.3 square meters of area;
The design of the dressing room begins with its insulation and lining to prevent the appearance of a through wind;
The room should have good natural light, the windows should be wide. But it's worth doing it the best you can. This will allow you not to hang curtains to create a secluded environment. And prevent cooling of the air at floor level;
in the interior of the room there are always benches or sofas, and if possible, a table. You can not do without a closet or a few hangers.

Note!
If the dressing room is small in size, then it is better to prefer wood as a material for furniture.
In extreme cases, a leatherette sofa will do.
Interior items made of fabric will not last long due to high humidity.

What material is suitable for finishing the dressing room

The design of the dressing room begins with the choice of finishing materials, and this is not so easy to do. The room is exposed to moisture for a long time, but it must remain warm, so tile is not acceptable for it. It gives a feeling of coolness, which is inappropriate here.

Traditionally, wood of various species was used for. Paint treatment is undesirable - naturalness is the basis of the bath interior.

It is not only beautiful, but also practical:

wood has an attractive appearance;
it is a warm material - it heats up quickly and maintains the desired temperature level for a long time;
pleasant aroma has a beneficial effect on human health;
a properly selected tree does not rot for a long time and without additional processing.

How and how to finish the dressing room - preference should be given to hardwoods, as more durable and dense in structure - linden, aspen, birch, alder.

Coniferous - pine or spruce will have to be treated with an odorless water-repellent paint that is absorbed into the thickness of the tree. As a finishing material, planed logs, lining, sheet pile boards are suitable.

Particular attention is paid to the floor. It is made waterproof and non-slip - dry wide boards. Porcelain stoneware is less common, but it is allowed to walk on such a floor only in special shoes - it is not too warm.

How to decorate a dressing room

Finishing is not limited to a set of technical actions for insulation and wall cladding,. To make it pleasant to relax in it and conveniently take care of the bath, the interior of the dressing room is thought through to the smallest detail. Traditionally, the style of the Russian bath is used for interior design - it creates a special atmosphere and comfort.

The walls are sheathed with clapboard - the direction is not of fundamental importance. It can be vertical, horizontal and even oblique.

The ceiling is covered with boards with obligatory vapor barrier under them. But this is not all, it is not enough to comply with all the rules and regulations. We also need to arrange the situation.

Room furnishing

If the room is small, then you can limit yourself to a few stools and clothes hangers, but do not forget about the aesthetic component - it’s good to hang thematic paintings, brooms, and bath paraphernalia on the walls.

When the area of the room exceeds the minimum dimensions, it will not be difficult to turn around in the design. It is interesting to create an unusual and beautiful interior with your own hands. The choice of furniture should be dealt with at the stage of construction of the bath. These can be large sofas with faux leather trim, wooden benches or chairs.

The decor of the room should be ergonomic and functional. Before you sheathe the dressing room, you need to decide on the style, it is possible that finishing with a beam with imitation of a log is more suitable.

All elements of the situation are subject to certain requirements:

fire safety - sufficient distance from the furnace, if this is excluded, then cover the place nearby with metal to protect against sparks;
environmental friendliness of all materials - exclude plastic from the interior;
compliance with the chosen direction in design to create harmony.

The organization of the dressing room includes the presence of structural details - a wardrobe, bedside tables or even a sideboard for dishes, if cooking and eating is supposed to be there.

If you move away from the classics and add a little luxury, then furniture with curved legs and carved backs will come in handy. Making a dressing room, if it is carried out in compliance with all requirements, will be a pleasant experience. Instructions for many decorative materials allow their installation in the bath.

Conclusion

The design of the dressing room begins with its lining and insulation. This is indispensable even if the walls are built from thick logs 200 mm in diameter.

The interior decoration of the premises consists in the formation of a comfortable environment combined with practicality - non-slip warm floors, walls and ceilings made of natural breathable wood. The video in this article will tell you in detail about the process and types of dressing room finishing.

The bath has long been used for hygienic procedures and health promotion. Only the right interior arrangement can give maximum pleasure. Each element (steam room, washing room, dressing room) should be as comfortable and thoughtful as possible.

Consider the subtleties of the design of the dressing room.

Peculiarities

A dressing room is a room located directly in front of the steam room. Its main purpose is to be a link between the cold entrance to the bathhouse and the hot steam room. It should not let cold air through. The dressing room can be spacious or small, designed exclusively for changing clothes. More often there are dressing rooms of medium and fairly large dimensions. In addition to performing their main function, they serve as a recreation area after the bath.

Regardless of the type of bath, the dressing room must meet the following requirements:

have good thermal insulation performance;
be finished with moisture-resistant materials;
be environmentally friendly.

As a rule, the inside of the dressing room is insulated and sheathed with decorative materials. For a log bath, finishing is not required at all. The main tasks of the owner are high-quality insulation and thermal protection of the structure.

Lining is usually used to finish a frame or wooden bath; tiles and bricks can be used for stone buildings.

Finishing materials

Perhaps the most common cladding option is lining, with which you can create a cozy corner for relaxation. It is necessary to mount the strips horizontally, which prevents the accumulation of moisture in the seams between the panels. In rooms with high humidity, the installation of lining on the crate or the use of eurolining is relevant.

In the spacious bath foyer, antique rooms, as well as in rustic interiors block house will harmoniously fit in. This material is used for wall decoration. It imitates a natural log surface.

For wall decoration often use PVC panels. Fastening them is easier and faster than lining. The panels are resistant to moisture, characterized by durability. Rich color finishes and a variety of textures make it possible to turn the most unusual design ideas into reality.

Such panels cannot be mounted on heating types of surfaces.

Under the influence of high temperature, the panels are deformed and release toxic fumes.

The described materials are easy to mount, thanks to the presence of special internal grooves. It is enough to study the instructions to do the work yourself. To create modern dressing rooms, you can use rubber paint. Its main advantage is increased moisture resistance. The material is applied to any surface (wood, metal, plaster, concrete).

To increase adhesion, special penetrating compounds can be used, and rubber paint can be applied over them. However, in most cases, these steps are not required.

The appearance, cost and performance of wood interior materials depend on the type of wood used. Oak is one of the most durable types of wood.. Possessing high moisture resistance, oak boards and lining are suitable for wet rooms.

Oak wood is reliable and durable, it retains its original appearance for several decades. In the process of heating, the oak releases beneficial phytoncides into the air with antiseptic properties, the ability to normalize blood pressure.

If the walls of the dressing room are very hot, can be used for finishing materials from abash wood. This raw material tolerates temperature rise well, is not afraid of moisture, has a low heat capacity and low weight. On sale, in addition to the African one, you can find the Asian variety of abasha, whose performance characteristics are somewhat lower. The wood has a light cream shade and goes well with cedar boards, allowing you to create interesting color contrasts in the steam room.

For people suffering from respiratory diseases, it will be useful to rest in a bathhouse and a dressing room lined with Canadian cedar. The essential oils released by the wood during heating have antiseptic and strengthening effects. The material is characterized by increased resistance to temperature differences, heat, moisture. Its color palette is delightful and includes hundreds of shades and undertones from golden red to reddish brown.

Lime materials for lining the dressing room for a long time retain their natural shade (honey-golden color). Other advantages include resistance to high temperatures, good sound insulation performance. In the process of heating, the linden gives off a pleasant sweetish aroma, characterized by a calming effect. It is good for health.

Surfaces sheathed with aspen lose their shade over time. This can be avoided by using a special wax. Aspen is moisture resistant, durable. However, not everyone likes the aroma exuded by her. For some, it can cause headaches.

Pine and larch have high performance properties. They are characterized by strength, as well as durability, the absence of deformation as a result of heating. Released phytoncides and essential oils help strengthen the immune system, normalize blood pressure, and reduce the risk of developing respiratory diseases.

Both types of wood have a pleasant honey hue.

It is unacceptable to use materials that quickly heat up for finishing the dressing room., as well as those that emit harmful substances when the temperature rises. From this point of view it is recommended to abandon linoleum and some types of paint.

It is important when lining the walls to provide ventilation holes for the removal of steam. This will prevent the material from rotting.

Before proceeding with the decoration, the room needs to be insulated from the inside. First of all, this applies to brick and frame baths, as well as block structures.

Heaters

To achieve a comfortable microclimate in the dressing room is possible only through its high-quality insulation. The heat-insulating material for the floor can be extruded foam, mineral or basalt wool. Usually, the insulation is laid out in the space between the finishing and white floors. A mandatory factor is the use of vapor and waterproofing materials.

Ceiling insulation is a necessary condition for reducing heat loss in the bath (especially when it comes to buildings with a cold attic). For thermal insulation, you can use basalt wool, as well as expanded clay of different fractions. Large granules provide thermal insulation, small ones fill the space between them. Instead of expanded clay crumbs, clay or sawdust is suitable.

To increase the thermal efficiency of walls usually use mineral wool or foil foam. They are placed between the crate and the finishing material.

A more modern option for heating is the installation of a floor heating system. It can be water or electric modification.

As a rule, installing one warm floor is not enough to heat a room, so it can be used to organize a heating system with convection heating. This method can only be implemented when installing a water system. The warm floor is connected to the installed radiators. The heating liquid (usually water, less often antifreeze) circulates through pipes under the floor covering and radiators, this allows you to achieve a comfortable temperature in the dressing room.

The choice of underfloor heating system should be approached responsibly. Each of the varieties has characteristic advantages and disadvantages. If we talk about electrical models, then infrared floor preferred maximum safety in high humidity conditions. He is able to warm up a medium-sized dressing room in 15-30 minutes.

Another option to heat the dressing room is to use a special design of the sauna stove. Its heating part is located in the steam room, and the furnace part is taken out of the steam room (for example, in the dressing room). The firebox is made under the fireplace (use the portal, the appropriate decorative elements).

Closed fireboxes equipped with doors with a glass window allow you to enjoy the warmth and reflections of fire. Glass in such structures is thick (up to 8-10 cm), heat-resistant. This allows you to claim its safety. The presence of a self-cleaning system prevents the appearance of soot on the glass surface.

Of course, you can use household heaters in the dressing room. They especially save in the winter in the absence of other sources of heat. However, most models heat the air, which causes it to become excessively dry. In addition, the air inside the dressing room is quite humid, the failure of such a stove is not ruled out.

Layout and design

Despite the fact that each owner chooses the style of the bath foyer in accordance with his taste and budget possibilities, Russian-style dressing rooms remain classics. They most accurately reproduce the atmosphere of how the baths were decorated in the old days. For wall decoration, logs or their imitation of wood (block house) are usually used.. The floor and ceiling are also wooden, beams are usually organized on the ceiling.

A large oak table becomes the center of the room, chairs or benches are placed around it. To smooth out some of the roughness of the interior, colored paths on the floor, an embroidered lace tablecloth, similar curtains and towels allow. The interior is complemented by brooms and bunches of dry herbs suspended from the ceiling, as well as pottery, a samovar on the table.

If the soul asks for luxury and an abundance of bright colors, you can consider the design of the dressing room in oriental style. Mosaics or tiles on the walls, characteristic Turkish patterns, soft lighting - these are the components of the interior.

The center of the dressing room will be a duet of a table with low legs and a cozy sofa or ottoman with an abundance of small pillows. Thick curtains on curtains can have a rich shade. Beautiful when they are decorated with tassels or fringes. An exquisite hookah, as well as small bowls instead of cups and incense sticks, will add oriental notes to the interior.

Connoisseurs of simplicity and elegance will love the Scandinavian style.. For wall decoration, light brown or whitewashed lining is used. Wooden furniture of simple geometric shapes is an indispensable element of the interior. These can be neat benches, tables, small wooden sofas covered with thin mattresses for convenience.

Modern style in the dressing room implies eclecticism. In such an interior, wooden and stone surfaces are harmoniously combined, furniture is used in simple forms.

The colors are predominantly warm, pastel (they promote relaxation), sometimes with bright color contrasts. As a rule, modern dressing rooms are characterized by practicality and versatility.

By correctly zoning the room, you can install a small pool, highlight an area with a table and dishes, install a barbecue, pool table or mini-library (it is important that the model is designed for indoor use).

For romantics, yachting style can be recommended. The dressing room is sheathed with wood of natural shades, the windows are turned into stylized portholes. Blue and white checkered curtains, fur pillows, rope rope decor and, of course, a decorative steering wheel will help emphasize the marine theme.

Furniture

Regardless of the style and size of the dressing room, the mandatory set of furniture in most of them is a table, a bench, a mirror and a hanger. This is a functional minimum that allows you to make the room practical. The installation of a sofa, a rocking chair, a small cabinet for dishes allows you to turn the space of the dressing room into a comfortable seating area. Near the mirror, it is logical to install shelves for useful little things and accessories, fix the hooks. Triangular ergonomic shelves can be placed in the corner.

It is important that benches and chairs are durable, resistant to moisture.. If there is upholstered furniture and textiles on the furniture, they should not be allowed to get wet, they must be washed and dried periodically. If space permits, you can organize a small kitchen area with a sink, a tile with a work surface or an electric kettle. The walls near the sink can be decorated with tiles or colorful PVC panels. It will turn out beautiful and practical.

Bath is a place where you can relax and unwind, relieve yourself of the burden of everyday work. With the help of bath procedures, you can remove toxins from the body, improve sleep. At the present time, many different plumbing innovations have appeared, but the bath is still one of the leaders in popularity. Consider the features of the interior design of the bath, finishing options in various rooms.

Requirements

When deciding what the design of the bath will be, you should think not only about the aesthetics of the premises. Baths must meet certain requirements to ensure the safety of visitors. The most important rules can be identified.

Make sure all wood surfaces are smooth and free of burrs and ridges.
Only wooden products should be used in the steam room, so you can avoid burns from very hot surfaces.
The corners of benches and shelves must be rounded, otherwise bath visitors may be injured.
Hang signs on the doors that will indicate the purpose of the premises. So it will be much easier to navigate in the bath.
Interior elements of the bath should not cause irritation or other negative. You should strive to create an atmosphere conducive to peace and relaxation.

Nothing should impede movement around the premises in the bath.
Materials that are environmentally friendly, safe for human health should be used.
For use in the bath, you should choose materials that are easy to clean.
When deciding on the design, consider the size of the bath. If it is small (for example, 3x4 m), it is better to do without unnecessary items - they will only interfere, impede movement. Equipping rather large baths (6x6, 5x4 m, and so on), you can already think less about saving space.

Finishing

It is not recommended to apply plaster, paint on ceilings in pairs. Due to temperature and high humidity, such coatings very quickly cease to be aesthetic. You can use wood or Termocork cork coverings designed specifically for saunas.

There are no strict requirements for rest rooms, but it is better to make such a room consistent with the overall design concept. For this reason, many opt for wood. You can also paint the walls, but you should choose a paint for this, which is characterized by increased resistance to temperature and humidity.

Design options inside

When choosing a suitable design option for a bath, you need to take into account the characteristics of specific rooms (humidity level, temperature). For washing, for example, only certain materials are suitable, which are highly resistant to liquid (many choose standard tiles). When designing a rest room, you can already show imagination. Consider the recommendations that you need to focus on when decorating certain premises.

washing room

The washing room can be made adjacent to the steam room or equipped as a separate room. You can install a shower tray or a washing cabin. If, for example, the bath is not located near a private house, but is public, and therefore there will be many visitors, it is better to make several showers (usually two or three are enough).

In the washroom should be not only a shower. To make visitors feel as comfortable as possible, shelves, mirrors, and comfortable benches should be purchased for such a room. There may be a small pool in the washing room (if it is not very small). You can install a cast-iron or acrylic bathtub with a pouring bucket in such a room.

The most suitable material for washing is ceramic tile materials. If the washroom is rather small, you should opt for plain tiles, and in a large room you can experiment with different color combinations.

dressing room

A dressing room is an entrance hall, which can also be a dressing room (however, in some cases the dressing room is located separately). Since the dressing room is the place from which the bath begins, it must be equipped so that guests are greeted with comfort and warmth.

If such a room is quite large, you can equip it with a rest room. To make the atmosphere comparable to home, you should take into account various little things. You can put a large table, music center, TV, refrigerator, hang pictures.

If you make the dressing room not an ordinary hallway, but a multifunctional room, you will need to insulate it. Some prefer to make a dressing room in the form of a veranda combined with a bath. The veranda can also be equipped as a wonderful relaxation room, ideal for use in the summer.

If we are talking about a simple bathhouse chopped from a log, it will be possible to do without any frills. The dressing room itself will look very interesting. It will only be necessary to treat wooden surfaces with special protective compounds. If the building, for example, is brick, you will need to take care of the decorative design of the surfaces.

The design can be made both classic and modern. It is possible to decorate the room beautifully with the help of contrasts or, on the contrary, choose such color combinations so that they look as harmonious as possible.

The ideal option is a simple "home" environment, which immediately evokes associations with comfort.

steam room

The steam room is usually entered from the dressing room or washing room. Such a room is most often equipped on the first floor. It is recommended to choose a wooden or tempered glass door for the steam room. There should be no metal elements on it, otherwise they will become very hot, and people will start to burn themselves about them. Only door hinges can be metal.

For one visitor to the steam room, one or two square meters in the room will be enough. You should also provide a place for the oven. The optimal ceiling height for the steam room is about 2.5 m.

Such a room should not be made too large, otherwise it will warm up for a long time, and the air will become dry when the stove is very hot.

It is recommended to create shelves from deciduous trees, but it is better not to use oak. When such wood is very hot, it becomes very slippery. You can combine different types, but in any case, the tree must be of high quality: without mold, rotten areas, tar pockets, knots. To control the humidity, the degree of heating, it is recommended to use a steam hygrometer, a thermometer.

The stove in the baths is most often installed next to the door. It is very important to insulate surfaces that are close to the oven. Surfaces can be insulated with stainless steel, ceramic tile coatings, bricks, asbestos cardboard.

You should not choose coverings from panels, PVC tiles, linoleum, rubber, plastic for the steam room. It is customary to create a ceiling in a bath from a board, lining, timber: it is the tree that contributes to the creation of a pleasant aroma in the steam room.

Kitchen

Such a room is most often the most spacious in the bath, because many equip a guest rest room there. Usually in the kitchen there are a lot of products created from wood. Wood contributes to the creation of an atmosphere of coziness and comfort in the room. However, such surfaces should be coated with compounds that make the wood more resistant to high humidity, which is typical for a Russian bath. The floor in the kitchen must also be resistant to liquids and non-slip.

In the kitchen in the bathhouse, it is recommended to use wide benches, which should be as comfortable as possible, and a large wooden table, at which all vacationers can easily accommodate. You should take care of the presence of a samovar or a kettle, shelves for all the necessary things, and purchase a sufficient amount of dishes. You can place video and audio equipment in the kitchen.

locker room

It is recommended to place the locker room separately from all other rooms in the bath so that all visitors can feel as comfortable as possible. Equipping the locker room, you need to take into account the recommendations of experts.

Make sure the ceilings are high. A person must be able to stretch his arms above his head without interference, otherwise it will be very uncomfortable in such a room. The best option for a locker room is about 2.5 m.
There should be sufficient space for visitors in the locker room.
For the floor, choose a material that is non-slip, warm. You can use a carpet, a suitable option is the arrangement of a warm floor.
It is recommended to hang or place a mirror in the locker room.
Electric sockets (several or one) should be provided.

Toilet

You can combine the toilet with the washing room, or allocate a separate room for it. In the second case, it is recommended to install not only a toilet, but also a paper holder, a sink with a mirror, a shelf or even a small closet. For finishing in the toilet, you can use a variety of materials: linoleum, cork, plastic elements, classic tile coverings, and so on. You can also experiment with combinations of several materials.

It is recommended to pay great attention to ventilation in the bathroom. You can use a heating device in such a room to make it more comfortable in the winter season. If you do not want to spoil the interior in the washroom, you can also place a boiler in the toilet.

You should not have a toilet near the room in which people rest. Otherwise, the bathroom will begin to annoy vacationers, they will feel unpleasant odors.

If you combine a toilet with a washing room, it is better to design such rooms in the same style. You can separate the toilet with a curtain, a partition. In combined rooms it is better to use standard tiled materials.

Various styles

The interior of the bath in the country can be decorated in any particular style. So you will not only have a good rest, relax, but also get aesthetic pleasure. The bath can be made "German", decorated in antique style, decorated in high-tech style - there are a variety of options. Consider the styles that are best suited for such premises.

Russian

Russian style is ideal when it comes to a bathhouse in the countryside. For the construction of such buildings, rounded logs, timber are often used. The wooden walls of a rustic bath will not have to be additionally decorated or finished with anything. The interior design is interesting in itself.

In such a bath, you can install rough benches, large tables, sideboards, a stove-heater. To create the necessary atmosphere, one should not forget about the little things: wooden ladles, embroidered tablecloths, old samovars, and so on. Rooms in the Russian bath can be decorated using brooms.

Country

This style is well suited not only for elite, but also for fairly simple baths. It is a bit similar to the Russian style, but the country has certain features borrowed from foreign traditions. Wooden products are also usually used, but this style is characterized by the use of beams, colorful linen and cotton materials, and bright dishes.

Since ancient times, bath procedures have been considered one of the most effective ways to maintain excellent health and even treat certain diseases, which is why baths are widely appreciated all over the world. The article will discuss how the dressing room is finished when building your own bath.

Dressing room - the face of the bath

Naturally, the fundamental room in the bath is the steam room, since the condition of the bath visitors depends on its functionality, efficiency and safety. But the bath does not end on the stove, steam and broom, and you can complete the pleasure of the procedures by visiting a comfortable rest room. The dressing room usually acts as the main recreation area.

It may seem to someone that it only houses a dressing room, but in fact it can be turned into a spacious room with space for comfortable sofas, armchairs, and a table. Also, a table for brewing tea will fit perfectly into the interior of the dressing room. Further in the article, the process of designing a dressing room in your own bath will be described in more detail.

The functional purpose of the dressing room

The main functional purpose of the dressing room is to protect the steam compartment from the penetration of cold air masses into it. However, today the bath is not just useful procedures, but also one of the best ways to spend time.

Accordingly, the arrangement of the waiting room should be aimed at expanding functionality: comfortable seating for relaxing, a table for several people, and what is most needed is a site for brewing delicious tea, which will complement the positive sensations from the procedures performed.

The locker room can be designed as an open type or as comfortable lockers in which several visitors can place their things at once. For various accessories and personal belongings, a chest of drawers can be installed nearby.

You can create light in the dressing room with the help of electric lighting fixtures, but nothing can be better than natural sunlight. Accordingly, the most extensive windows will be very useful and effective in increasing the level of illumination inside the dressing room.

But it is worth remembering that windows are one of the main structural elements that cause heat leakage from the dressing room and the bath as a whole. It would be wiser to use double-glazed windows that meet all the required criteria for quality windows. But a double wooden frame will cope with the protection of the dressing room just as well.

It is important to take into account the heat-insulating finish of the room, as this will balance the temperature difference between the steam room and the dressing room. If you plan to use the sauna all year round, you can install an electric fireplace in the dressing room. With a sufficient area of the room, you can additionally install a massage table or a large soft sofa in it.

Features of the interior design of the dressing room

The interior design of the dressing room in the bath does not require any frills when it comes to a chopped wooden bath (read: ""). The main task when finishing a log house from the inside is its thermal insulation and wood treatment with various impregnating compounds that extend the maximum service life of the material. If we are talking about finishing old buildings, brick buildings, etc., then the dressing room needs not only to be improved functionally, but also to renovate its decorative design.

It is worth saying that the number of materials used in finishing the dressing room is limited due to the high humidity inside the bath. However, this does not interfere with the creation of a high-quality dressing room design, which will look original in the photo and during visual inspection.

The richness of color and texture solutions will allow you to easily create a design in the dressing room that matches any modern or classic style. You can choose the most harmonious combination of colors, or vice versa, use the method of contrasts. Also, the design of the dressing room can be improved with decor elements and accessories familiar to residential premises.

Optimal materials for finishing work

The tile must have optimal strength characteristics, as well as easily withstand temperature changes, which are simply inevitable in the dressing room (more: ""). Special non-slip surfaces will be very practical and will increase the level of safety in the room.

It can be said for sure how it is impossible to decorate the dressing room inside, and to be more precise, it is unsafe. We are talking about various synthetic floor coverings and facing materials: laminate, linoleum, etc. The reason for this is their intolerance to high humidity and the tendency to release various substances harmful to the human body.

When it comes to how to equip a dressing room, then every specialist will confidently call wood the best material. It can withstand the most extreme operating conditions, and will also create a beneficial microclimate for the human body in the dressing room. Also, wood looks original in the photo and during visual inspection, which allows you to combine it with any finishing materials.

PVC wall panels for dressing room decoration

PVC is one of the most practical and cheap materials sold in a large color palette, which allows you to design a beautiful dressing room with a certain style at minimal cost. Another advantage of this material is its ease of installation. Work on its installation is subject to every person with a basic set of building skills.

Such panels can be mounted on even wooden walls without using a special frame. The work uses specialized fittings and guides that hide the joints between the panels. The material is cut to the desired size using a sharply sharpened construction knife.

It is only worth noting that, like any plastic material, it cannot be mounted on heated walls that separate the dressing room from the steam room.

What is rubber paint

This material on the construction market was introduced relatively recently, but has already managed to gain high popularity. This paint and varnish material is universal and can be applied to almost any surface in rooms with high humidity conditions. When the paint hardens, an elastic layer is formed that is resistant to stress, cracking and peeling during operation.

No preliminary work is required to prepare the coating for the application of rubber paint. You can limit yourself to just the simplest alignment of defects and cleaning from dust, dirt, stains, etc. If necessary, the surface should be strengthened with special deep penetration compounds.

You can apply rubber paint, as usual, with a paint brush or roller. Spacious rooms are easily processed with a spray gun (paint gun).

Facing block house in the dressing room

A block house is a type of lining that imitates the texture of a log wall. The material shows its best qualities in spacious rooms. The most effective dressing room decor becomes proportional to the increase in the radius of its curvature. The width of one panel can be from 90 to 260 centimeters.

When installing the material, it is necessary to take into account that the block house is fixed to the crate. During installation, it is necessary to take into account the fact that the total thickness of the structure will collectively take the value of the thickness of the lathing bars and the panels themselves (1.3-5 centimeters).

The disadvantage of the material is that it is difficult to join the panels in the corners of the dressing room. It is necessary to adjust the details for laying them in this part of the room using a jigsaw. Cutting panels at an angle of 45 degrees is an affordable technology, but not always appropriate. It is best to entrust this work to professionals, since without experience it is almost impossible to join panels in the corners of a room.

The main difficulties arise when installing such elements of the electrical system of the room as sockets and switches. It is inconvenient to process those parts of the room where the panels are joined to window and door blocks.

When installing electrical wiring, it is allowed to lay it in an open way. The electrical wire on the block house can be fixed with metal brackets or laid in a cable channel.

Lining - the most popular finishing material

This material has proven itself from the best side, since there are three main categories A, B and C, which leads to a wide price range. Accordingly, each owner will be able to choose the best material for himself. The lining is laid horizontally, which provides maximum moisture protection without allowing liquid to penetrate into the joints between the boards.

The lining is made on the basis of natural wood of various species. The thickness of one board can reach from 1.1 to 2.2 centimeters. The most popular options for sheathing the dressing room are options with a thickness of 1.4 and 1.6 centimeters. On a flat base, the lining can be mounted without a crate. If there is an increased level of humidity in the elevations, then the crate is required. The step between vertically arranged rails should be from 0.6 to 1 meter.

There is a special groove and spike in the material board, which makes it possible to carry out the installation of the flooring very simply and with the maximum level of joining of the boards. The highest quality type of material is eurolining, manufactured according to European standards. On the back side of the boards, special milling channels are applied, which allow you to effectively ventilate the floors from moisture.

Types of wood used in the decoration of the dressing room

Naturally, the most common and most studied material for finishing dressing rooms is wood. There are a large number of its species, which are selected taking into account the positive characteristics and characteristics of each breed.

To date, the following types of wood materials can be selected on the construction market:

Oak. The same type of wood that meets the basic operational requirements. It is characterized by the following positive qualities: high mechanical strength, water resistance and the longest possible service life. Oak wood releases volatile substances useful for the human body. On the medical side of the issue, oak is useful in that its smell leads to a decrease in blood pressure and toning of the vessels of the brain.
Abash. This is the wood of a deciduous African tree, characterized by low heat capacity, solid structure and low weight. During operation, Abash wood retains its appearance for a very long time. There are no knots on the surface, which allows you to refuse to process the material before laying. Such wood does not have any healing properties.
Canadian cedar. An interesting wood species with high humidity, resistance to temperature extremes and fire resistance. The strength of the material is high and during operation it does not lose its positive qualities. Heating Canadian cedar results in the release of essential oils with beneficial antibacterial properties. These substances are especially good for the immune system and for the elimination of diseases of the respiratory system.
Linden. Boards from this breed are distinguished by a very beautiful texture and color, as well as a high degree of absorption of moisture and sound. Processing lime boards is very simple, and in extreme temperature and humidity conditions, they absolutely do not change the level of their technical characteristics. In addition to the pleasant smell, linden wood releases useful substances into the air that have a positive effect on the functioning of the nervous system. People who are in dressing rooms with linden wood lining experience a general uplift in mood, a surge of vitality, etc.
Aspen. The main distinguishing feature of aspen lining is absolute moisture resistance and increased strength of monolithic boards. Under mechanical load, aspen products do not deform, they can be easily processed and mounted. In its pure form, wood may lose its color during operation, but special processing tools will help quickly restore pleasant light colors with a greenish tint to the coating. Aspen has about the same effect on the human body as linden.
Larch. The strength of lining made of such wood exceeds the values characteristic of oak and pine, which causes the highest complexity of its processing. The service life of such wood can reach a whole century, and in addition to all the technical qualities, the aesthetic appearance of honey-colored boards is added. Inhalation of substances emitted by such wood is considered an excellent prevention of any colds. It also has a positive effect on people suffering from hypertension.
Pine. One of the most durable types of wood, which in its main characteristics is comparable to oak. It is worth highlighting its main drawback, which is the release of resins when heated. The heated resin itself can cause burns upon contact with the human body. It is best to cover with pine boards only those parts of the dressing room that will be difficult for a person to reach. Substances secreted by conifers have bactericidal properties and are very useful in the fight against various respiratory diseases. Essential oils are also released, which increase the overall level of the protective properties of the immune system, etc.

Outcome

The article describes in detail the main features and nuances of how to arrange a dressing room on your own. If you follow the recommendations for finishing and use high-quality materials, you can get a cozy place in which the effectiveness of the accepted bath procedures will only increase.

All installation work can be entrusted to specialists who will take responsibility for all stages - from the purchase of the necessary materials (at the request of the customer) to their installation and putting the dressing room into operation.

Categories

Popular