Make a honeycomb shelf. How to make honeycomb shelves. Original art object on the wall. Fasteners for glass shelves

The technique used to create the shelf will be very useful if you need to connect more than 4 sides. The essence of this technique is the use of adhesive tape to clamp the surfaces to be glued.

1. We will need:

  • The right amount of wood, for 6 honeycombs I used a piece of 1700 mm X 600 mm
  • Saw that can cut 30 degree corners
  • Wide adhesive tape
  • Furniture glue
  • Sandpaper
  • Putty (optional)
  • Paint any color
  • Wood primer

2. Cutting


Decide on the size of future hexagons. I took 150 mm wide and 190 mm long, such dimensions of the hexagon face create a honeycomb with an approximate inner diameter of 390 mm. I advise you to take sizes smaller than mine.

We mark and saw off the edges (in my case it is 18 mm plywood), the sides can be immediately cut at an angle of 30 degrees.

3. Puttying


I had a rather bad and rough plywood, so I had to putty it. In my plans, I had to paint only the inner walls, so I putty only the inner surfaces. But you can paint both sides, or not paint at all, and just sand it well, it's up to you. But if you decide to putty, then carefully apply a thin, even layer of putty to the tree with a wide spatula. If small irregularities have formed, this is nothing, the main thing is that there are no dimples, otherwise you will have to putty on the second layer. When we are done, we are waiting for the complete hardening of the putty. The exact time should be written in the instructions attached to it.

4. Sanding

We thoroughly grind the putty surfaces, at the same time you can go through all the others.

5. Priming

Apply a layer of primer. As soon as it dries, take a fine sandpaper and process the surface. If necessary, repeat the process again until you get a nice smooth surface.

6. Painting

We paint surfaces in 1-2 layers, we wait for drying.

7. Bonding

Fold all the parts of the hexagon in one line, inside down. Make sure they are close to each other. We apply a couple of strips of adhesive tape and leave a small piece behind the surface.

We turn the whole thing over and apply glue to all sides cut at an angle of 30 degrees.

When all this takes the form of a hexagon, we simply fix the remaining pieces with ribbons.


That's all, now we wait until the glue dries, and the job is done. On the wall, such shelves can be hung in small corners, good luck to you)


The honeycomb bookshelf is quite unique and interesting. In this tutorial I will show you how to make such a shelf yourself!

Step 1: Tools

We will need:

1. Wood (plywood). To make 6 cells like mine, you need a piece of about 170 by 60 cm.
2. A miter saw that can cut edges exactly 30 degrees.
3. Wide adhesive tape (painting tape)
4. Wood glue
5. Sandpaper
6. Paint or varnish

Step 2: Cut the plywood


I used 18mm plywood. The angle between the sides inside the hexagon cell should be 60 degrees, so I set the saw to 30 degrees.

The cells themselves can be any size you want, but it’s better to make a drawing in advance and decide on the exact dimensions of the sides. My first pancake came out lumpy, or rather the first two. The cells were either too big or too deep. Total dimensions of each side: 15 cm deep, 19 cm long. The approximate diameter turned out to be about 39 cm.

Step 3: Putty


The quality of the plywood left much to be desired, and I wanted the outer surface of the shelves to shine and shine. To achieve the desired effect, you need to sand the surface. But this process can take literally days if there is no grinder at hand. So I went the other way and treated the surface with wood filler/filler.

Step 4: Sanding

If you also go my way and use putty, then the next step will be sanding with sandpaper.

Step 5: Painting

First, on the sides that you will be painting (I only painted the outer ones), you need to apply a coat of primer, let it dry, sand it, or apply another coat if necessary. You can repeat the process several times until you achieve a smooth surface that you like.

After priming, you can start painting. I chose the gold color, in reality it looks much better and more spectacular than in the photo. The feeling that you have gold bars in front of you.

Like the shelves from the design blog? We offer not to "wait for Zhdun", but to make them with your own hands. Can't you? Yes, here and a complete novice work for one evening! Now we'll tell you everything.

Designers love hexagons: no matter where you look in the community, there are honeycomb-shaped ceramic tiles, hexagon furniture, and even shelves on the walls of trendy shapes. Of course, you can buy yourself such in some online store, but why spend so much money? A board, a couple of screws, and the remains of azure for wood - “Whoo!”, and you yourself will not notice how trendy shelves appear on the wall.

To make a shelf yourself, you will need:

  • boards 1-2 cm thick, 10 cm wide (it is better to calculate the length individually);
  • a pack of wood screws;
  • corner brackets - for fastening shelves;
  • screws with dowel - for fastening shelves.
  • drill and drills;
  • grinder or sandpaper;
  • construction roulette;
  • ruler.
  • Belinka Email Universal white paint;
  • colored azure Belinka Interior;
    (or any other wood paint for interior use).

We make a wall shelf with our own hands

To figure out how many shelves and what configuration you want to get, take a sheet of notebook and sketch out the desired design. Let it be separate hexagons scattered along the wall, or gathered in groups - it's up to you. Any size can be made. For example, take as a basis the length of the edge - 20 cm. Now count how many edges you have drawn, and multiply the number by your edge length - this is the total footage of the board you need to buy. (And if there are segments left, make a shelf as a gift to a friend).

Let the “advanced” woodworkers start their work by cutting wood with a circular saw, and we will traditionally go to the store where we will buy boards and immediately ask them to be cut to the sizes we need.

The main thing to say in the workshop is that you need 30° cuts! Do not forget.

Now put all the pieces together to check that everything fits together. Order? We go home to collect shelves.

At home, we add the details again. It is more convenient to do this on a flat floor. We drill holes, and only then we drive in self-tapping screws - otherwise the boards may crack. We collect all the elements according to the intended design.

We grind all surfaces well and proceed to painting. In the variant in the photo, all the shelves are painted with azure, and the ends are painted with white enamel for wood.

  1. Regardless of whether you paint the shelves with azure, enamel or other decorative coating, choose reliable paints that are safe for health. It must be materials for interior work, you don’t want to breathe harmful substances, do you?
  2. If the standard blue color does not suit you, you can mix several colors of the same brand yourself. True, you will have to make test colors on an unnecessary board and wait for it to dry.
  3. Apply the first layer of azure with a brush or roller, and after 3-4 hours the second. Enamel is also recommended to be applied in 2 layers. Bookshelves, like other furniture, can be varnished if desired: for furniture in the room, we recommend Belinka Interier Lak.

In this article I will tell you how to make modular shelves in the form of honeycombs from cardboard. I didn't consider using wood. Because I don't have a tool for processing it. Corrugated board is available (and free) and easy to work with.

Step 1: Collect materials


List of required materials:

  • Sheets of double-walled cardboard (in my case, the thickness was about 7 mm)
  • Plain cardboard
  • Cutter
  • PVA glue)
  • Paper clips (take the largest one that holds at least 2.5 cm of material)
  • masking tape
  • Dye
  • Spray paint in cans
  • Putty
  • Sandpaper

Step 2: Shelf design and template



DIY honeycomb shelves: 266mm long x 187mm high x 150mm deep. It's quite modest for a shelf, but given that we're using cardboard, I was worried that the large size would compromise the integrity of the structure. You can increase the size by adding more layers (thickness).

My idea is to build a shelf in the form of a "sandwich" of corrugated cardboard with a layer of ordinary. This will turn the corrugated board into a wood plank-like shape that is easy to shape and glue.

You can see the size template in the picture above. Please note that my corrugated board is 7mm thick. If the thickness of yours is different, adjust the dimensions accordingly.

Step 3: Draw and cut out the template


Draw patterns: there will be two (2) A patterns for the top and bottom and four (4) B patterns for the sides. There are six (6) cardboard "boards" in total.

Step 4: Fold the cardboard




Make a crease to make it easier to bend and fold. Fold like a corrugated cardboard envelope.

Step 5: Cut the Corrugated Cardboard




Cut the corrugated board to the size of the cut out template. Insert the corrugated board into the folded cardboard. Apply a large amount of glue to the "sandwich". Use a clip to secure the cardboard while the glue dries.

After drying, cut off the excess cardboard on both sides. Use the outer corner of the cardboard as a guide (this is the reason for using sandwich cardboard).

The angle is important to join cardboard boards together. If the corner is slightly off, you will have a hard time gluing it together and it won't form a perfect hexagon.

Step 6: Glue the Boards



Show 4 more images




At this point, you will have six (6) cardboard boards. To make it easier to glue them together, first place the boards on a flat surface. Use kraft tape or masking tape to hold the boards together. Flip them over and apply glue along the joining edge of each board.

Then fold the boards to get a hexagon shape. Here's a tip on how to make sure your shelf is really hexagonal. Draw a hexagon shape template (from the template in step 2) on a piece of paper. While the glue is still wet, place the shelf on top of the paper. This will help you make sure you have the exact hexagonal shape you want.

Step 7: Putty, sanding, painting


Remove the masking tape and start filling in the gaps with putty. After that, smooth the rough surface with sandpaper. Be careful when sanding because you can scrape away the surface of the cardboard (we're dealing with cardboard here, not wood). I applied a thin coat of white paint (water based) to the shelf and then finished with acrylic.

These cute honeycomb shelves and cute mess on them will brighten up the surface of any room. At the same time, the racks are very practical and functional.


Here you can learn more about how to make honeycomb shelves yourself. After all, this is an exciting activity that gives room for imagination and creativity when creating a “bee house”. They will not only fill the empty space on the wall, but will also bring a smile to your face every time you look at them.

Perhaps this has already been discussed on the Design Museum website, but it will not be superfluous to recall that any design made using hexagonal blocks is the strongest and most stable.

This is a truly ingenious place of storage with which you can express your individuality. The modular structure allows for interesting geometric compositions.

You can place books, CDs, collectibles or antiques on them, demonstrate crafts made by you and your children, vases with artificial flowers. Live climbing plants will fit perfectly.

Such shelves will become a real art object on your wall. Don't be shy, don't hold back your imagination, arrange the blocks in the most optimal way for you! The video below will tell you how to make such original shelves.

Fitting © 2022 Design and interior of apartments