Stump floors. How to fill the floor from saw cuts of wood. Do-it-yourself wood cut floor: advantages, features and stages of formation. Wooden saw cuts - laying and pouring technology. Laying a log floor on a sand surface

So, further it will be written how to make a floor from wooden cuts, what are their advantages. Recently, tree cuts have become very popular. They are used for interior decoration, various items are made from them, and they are also used to make floors in the house.

To make floors from saw cuts, a lot of work is not required. The result will delight with the natural expressiveness of the texture.

Today it is very fashionable to use natural materials for decorating rooms. Next, it will be described in detail how to make a floor from wooden saw cuts in a house.

Advantages and disadvantages of sawn flooring

First, more about the advantages of this method of decorating floors:

The floor will be made of natural material, which will not have any negative consequences for human health;
Due to the fact that it is made of natural materials, this will save money;
The strength of the floor exceeds all expectations;
Such floors will have an aesthetic appearance and a pleasant surface for the feet;
To make a floor from wood cuts, you do not need to hire specialists, which also saves money.

Now a few shortcomings:

For such a floor, you will need a large amount of high quality wood. For this reason, it is desirable to cover small areas in order to protect the forest;
Sawn floors will require regular maintenance. This must be done every 2 years;
To perform such floors, any tree species can be suitable. But it is recommended to choose wood that has a dense structure. Oak, walnut, hornbeam, beech have such a structure.

To perform work, the wood must be completely dried. Wet wood is not suitable for the floor.

Option one

For this option of making the floor with your own hands, end log cabins of logs up to 120 mm thick can fit. However, in this situation, you can show your imagination and lay round log cabins of various diameters. The following materials will also be needed to complete the work: lime, sawdust, wax, clay, flax oil, water.

Laying is done as for a mosaic with small gaps between adjacent parts. Sand with small pebbles up to 10 cm thick should be poured onto the surface. Then saw cuts should be laid, pressing them into the sand a little. You also need to adjust the height of the parts - it should be the same. Gaps should be filled with the following paste: 1 kg of fat, 5 kg of sawdust, 1 kg of lime, 2 kg of moistened length.

Then you need to carefully fill in all the gaps and cracks in the cuts of the tree. Leave everything to dry for 2 days. Then the surface must be well polished. You can do this with wax and oil.

Option two

Wood cuts need to be cut with a band saw. Then they are placed on plywood, glued with glue for construction work. The seams must be filled with a special solution, in which there should be 20% sawdust.

When everything is dry, you need to sand it with a sanding machine. The surface of the floor will become even, and the cuts will be clean. Then the surface of the floor from the cuts must be covered with a sealant. Mortar 80% is a self-leveling epoxy-based self-levelling mortar. The color is recommended to choose dark. But it will be necessary to watch that the dark paint does not stain the surface of the log cabins.

In some cases, saw cuts are placed on liquid concrete. However, the choice of material is at the discretion of everyone.

After the final leveling and polishing, the floor surface can be covered with a stain, then a finishing lacquer coating can be applied. So the floor can be given a certain shade.

Now we know about the implementation of the floor of wooden log cabins. Here you can give freedom to your imagination and make various ornaments from log cabins of different diameters. Follow our instructions on the technology of work and the saw cut floor will be excellent. We wish you success!

Benefits of wood flooring

Such floors are as environmentally friendly as possible;
Extremely low rates. Finishing material can be found literally under your feet. The only condition is the even thickness of the fragments;
Rich design possibilities. You can use saw cuts from thick logs with a pronounced layer of bark, you can use fragments of the same diameter, or different ones, to create an accentuated uneven pattern. Fragments can differ not only in size, but also in shape (beam cuts), as well as colors. All this opens up the widest possibilities for design. Even cracked logs can go to work, bringing their own visual charm;

Important! It should be understood that logs containing signs of disease should not be used.

An original approach that will be able to surprise for a very, very long time;
Versatility. This finishing method can be used not only for the floor.

minor flaws

Those people who are engaged in laying such floors argue that the process is not at all as complicated as it seems. But here it all depends on the size of the fragments and the floor area. Sometimes you can carry quite a long time;

With good filling and processing, such floors are quite durable structures that do not need additional processing. However, in case of errors, such a floor can cause a lot of trouble. Therefore, the requirements for attentiveness and compliance with all the rules are very high here.

Are all logs suitable for this role?

In fact, in addition to the "painful" logs already mentioned above, those that have too much softness will also not work. Try to choose a tree from hard, durable species. If we take specific examples, then such wood species as spruce, pine, fir, cedar, aspen, linden, poplar are soft. It's better not to use them. But oak or walnut are just right for this.

You need to focus on your financial capabilities. After all, such floors can be not only cheap, but also quite expensive if you buy blanks and do not make them yourself, and also if expensive wood species are used to finish the floor.

Installing floors on plywood with glue

As part of this method, sheets of plywood are laid on the floor, the thickness of which should not be less than 10 millimeters. At the same time, it is better not to make the fragments themselves too thick, especially if you have low ceilings in your apartment. You can get thin cuts with a band saw that can process wood very accurately.

In this case, the logs are laid on building glue, and, after it dries, it is best to seal the seams with a solution that has the following recipe:

5 kilograms of sawdust;
2 kilograms of wet clay;
1 kilogram of fat (you can use the same amount of linseed oil);
1 kilogram of lime;
marble dust. It is added if it is necessary to provide the floor with water resistance, as well as for visual reasons.

Usually the surfaces are then allowed to dry for about two days. As soon as the putty for the gaps has hardened, it is necessary to grind, and apply a varnish, a transparent sealant, or an epoxy-based mixture with a self-leveling function on top (the above self-leveling floors, often used in non-residential premises).

Laying a log floor on a sand surface

You should start with the fact that the work area is limited, after which the floor surface is covered with sand of river or sea origin. The layer of sand in this case should be 5-10 centimeters thick. So this approach is more relevant for apartments with a sufficient ceiling height.

Further, in fact, the process of laying the log surface begins. Laying should be done by strongly pressing the fragments into the sand base. At the same time, you need to try to work to ensure that the level of the stacked logs is approximately the same.

With regards to where exactly to carry out the installation - you can focus on covering the floor with tiles. Someone starts from the far viewed corner, someone from the threshold, and some do it from the middle. Be that as it may, on the sides of the floor we usually have skirting boards that can hide bumps. In addition, using options with different diameters, you also untie your hands the opportunity to fill the edges of the floor with a “trifle”. Of course, you can’t do without trimming, so also prepare a saw.

As soon as everything is laid, then we proceed to the stage of filling the voids with a paste, the composition of which was announced in the previous method. The ending work is identical - we fix the structure with a self-leveling floor, or choose polishing with natural beeswax or linseed oil.

"Money" alternative to saw cut logs

Along with the trend of laying floors from log fragments, flooring from coins is also gaining popularity. There is much more work in this case, but the visual is sometimes amazing. We will talk about this method of finishing the floor in one of the following articles.

Floors are an important flooring in any room and can be made from a variety of materials. Wood is considered environmentally friendly and attractive. Therefore, the floor is often formed from their own hands. It does not require the investment of numerous funds, and is also considered easy to create.

Features of this floor

Do-it-yourself wood cut floor in the photo looks attractive and interesting. Its creation involves the use of special "rounds", the thickness of which is equal to several centimeters. They are formed as a result of the cross-cutting of logs.

Due to their correct laying on the base, a bright, beautiful and unique surface on the floor is created. To fix the coating, various liquid materials are poured, most often polymers are used for this.

Pros of the floor

A do-it-yourself floor from wood cuts is created simply, but at the same time it has many advantages:

an environmentally friendly coating is formed;
it is possible to make a floor with minimal expenditure of money;
you can use various unique features to create a unique design, since it is allowed to use saw cuts from various logs that may have different or similar fragments;
elements differ in shapes, colors or dimensions;
such a decision is considered original for each house or apartment;
it is easy to make a floor from wood cuts with your own hands, which significantly reduces the cost of creating a coating;
floors are considered universal, therefore they are suitable for any interior and style.

Some people even prefer to use cracked logs, due to which a charming coating is obtained. But it is necessary to use only logs in which there are no signs of disease or decay.

disadvantages

There are some drawbacks to this floor. It is important to choose fragments that have the same thickness. If mistakes are made in technology, this will cause the creation of floors that do not have high strength and durability.

What kind of logs can be used?

Not all elements are suitable for this process, as some requirements for them are taken into account:

too soft logs are not used for the procedure;
it is important to select saw cuts obtained as a result of processing hardwood;
saw cuts of spruce, pine or aspen are not suitable for these purposes, so walnut or oak is the best choice;
the financial capabilities of buyers are also taken into account, since natural wood is expensive.

If you use expensive wood species, then the design will last a long time and will look luxurious.

How to make a floor?

Do-it-yourself floor from wood cuts is created step by step simply and quickly in time. For this, the following steps are performed:

the procedure is similar to laying paving slabs, so initially you need to carefully prepare the base, which must be well-compacted, even and solid;
a layer of river pebbles is laid on top of it, and its thickness should vary from 6 to 10 cm;
further, the saw cuts are directly laid, for which they are adjusted using a rubber hammer;
it is important to constantly check the correct location of each element with a level, which will avoid the presence of distortions and other problems on the coating;
between the cuts there is a distance not exceeding 1.5 cm;
then the joints between the elements are filled, the mixture for this can be bought ready-made or made independently using clay, lard, lime and sawdust;
often selected polymer compositions of high quality;
the mixture is introduced into the seams between the saw cuts, after which it is well rubbed, it is important to make sure that there are no air pockets, and if voids remain, they can cause cracks or water penetration under the floor;
the procedure for filling the sutures is repeated after two days.

Thus, using the right technology, do-it-yourself floors from wood cuts are formed very simply, and at the same time, a high-quality and attractive design is obtained in any room.

What to do after creating the floor?

As soon as the floor is made from wood cuts with your own hands, you should polish it well. It is optimal to use a sanding machine for this, and after grinding it is necessary to check the coating for cracks. If they are absent, then manual grinding is done at the end. After the floor dries, polishing begins; for an environmentally friendly coating, it is better to use wax or linseed oil.

A saw cut floor is considered an interesting choice for any room. It has huge advantages, although it also has disadvantages. It is considered easy to create, therefore, due to your own efforts and small financial investments, you can get an original and unique design on the floor.

Natural materials are appropriate in different styles of landscape design, so among the variety of all kinds of country paths, wood flooring is often found. If you decide to make a path from boards in the garden, a wooden floor on the terrace or a path from tree cuts with your own hands in the country, look at the photos of the possible options, study all the stages of preparing the site and wood, how to lay the tree and how to take care of the coating.

Where to get saw cuts from wood

Comfortable and beautiful walk on the lawn

What are the advantages of wood materials

The attractiveness of wood materials for the construction of country "means of communication" is determined by:

Availability. Of course, wood prices are rising, but the cost of wooden paths remains lower than that of stone pavements, clinker bricks, and paving slabs. In addition, you can use lumber and fallen trees on the site that were not used in the construction of buildings in the country.
High decorative. The unique texture is beautiful in itself, it allows you to create a unique coating pleasing to the eye with the author's design.
Ease of operation. The construction of wooden paths does not imply the presence of special theoretical training and special practical skills. It is enough to be able to use a saw, a shovel, a hammer.
Environmental friendliness. Natural material is safe for health, harmonizes perfectly with the environment, and is especially popular among fans of eco-style.

Natural decorativeness of wood - each cut has a unique pattern

Disadvantages are also present: wooden paths are not very durable, they are prone to insects, fungus, and mold. And yet they can be used from 7 years to a quarter of a century, depending on the type of wood. However, this requires: competent processing of blanks before laying, proper installation and a reliable foundation, arranged in accordance with all the rules.

The tree is in perfect harmony with the environment

Preparation of the base for the main path

So that the garden path does not swell, fail, overgrow with weeds and eventually crumble in the next year or two, you need to prepare a reliable bed (base) for it.

Marking the contours of the path

This is a simple, but rather laborious task is as follows:

On the territory, mark the boundaries of the track with a cord stretched between the driven pegs. On the bends of the route, pegs should be placed often, with an interval of no more than half a meter (depending on the radius of curvature), and on straight sections, pegs can be driven in after 2 or even 3 m. You can also mark the contour of a winding path with sand, chalk powder, lime.

If you plan to install curbs, provide for an appropriate indent when marking the width of the bed.

Within the markings, select the soil by about 20 cm, controlling the depth of the resulting trench with a template or ruler. This should be done in dry weather: rain that has spilled into the trench will significantly reduce the quality of the foundation.

If curbs are needed, install them by leveling them. Under the curbs, it is desirable to add compacted sand.

Tamp the bed, line it with geotextile or PET film to protect against weed germination and prevent subsidence.

Lay a drainage layer of gravel or crushed stone of a fine fraction 4-10 cm high on the bottom (depending on the stability of the soil). You can use a gravel-sand mixture (9:1). Thoroughly tamp with a roller, vibrating plate or hand-made homemade rammer.

For some types of paths, it is required to pour a sand cushion of the same height over the drainage layer. It must be poured gradually, in layers, moisturizing and well tamping each layer.

Start of foundation preparation work

After that, you can start laying paths made of wood of one design or another in the garden.

How to lay out a path from wooden cuts

The advantages of using wooden saw cuts (cuts, slices, logs) as a material for paving paths have already been appreciated by many summer residents and homeowners. Paths paved with charming logs allow you to comfortably move around the site, look organically among green spaces, and blooming flower beds perfectly set off.

A path made of wooden saw cuts emphasizes the beauty of greenery and flowers

Where to get saw cuts from wood

Ready saw cuts from various types of wood are offered by many manufacturers. You can even purchase blanks already processed with special compounds, which will only have to be properly mounted on a prepared base. This option is good when the budget allows.

However, if you even glance at the price lists, you can experience some disappointment. For example, unprocessed larch sections with a diameter of 30 cm and a height of 10 cm are offered by a domestic manufacturer at 150 rubles per piece.

A simple calculation shows: material for a 9-meter trail 60 cm wide will cost 9,000 rubles. excluding shipping and handling charges before packing. And if you make cuts of a tree for a path with your own hands from a fallen trunk that clutters up the site, the same path can be paved almost for nothing.

You can prepare saw cuts yourself

How to make cuts with your own hands

Cheaper than ready-made cuts will also cost blanks sawn independently from purchased round timber. You will need a few tools for work:

benzo or electric saw;
tape measure or template;
pencil or crayon for marking;
sanding scraper.

Any type of wood can serve as the starting material. However, if there is a choice, then from conifers it is better to take larch, pine, and from deciduous - oak, alder, hornbeam, acacia. The paths made of larch and oak will last the longest. But you need to keep in mind that the wood of these species is difficult to process. The selected tree must be dry, otherwise the cuts laid in the ground will warp, crack - the work will go down the drain.

To make saw cuts, you need to perform the following manipulations:

Clear the trunk of branches.

Sand the barrel with a scraper or other tool. Perhaps someone will prefer to peel ready-made logs from the bark.

Using a template, mark the log lengthwise into equal parts of 10-20 cm. The thicker the trunk, the greater the saw cut height. In order for the cuts to be securely held in the track, it is undesirable to make them less than 10 cm high.

Dissolve the trunk according to the marks.

Wood cuts are ready

Treatment of slices with special compounds

Before proceeding directly to laying the path from the saw cuts of the tree with your own hands, the cut blanks must be processed to protect against insects and fungus. For this purpose, you can use:

special antiseptics, deep penetration impregnations purchased at the store, using them according to the instructions;
a home remedy in the form of a solution of copper sulphate (10-20%), in which the cuts must be kept for two days, then dried in the shade for the same time;
drying oil brought almost to a boil - it must be applied with a brush on all surfaces of the cuts;
working off engine oil - use it as drying oil.

Path from "aged" wooden saw cuts

From the impact of copper sulphate, the tree quickly darkens. If there is a desire to achieve the effect of an "aged" tree, such processing is what you need. In an effort to preserve the natural color of the material, it is more advisable to impregnate with drying oil. You can also use the old trick of the inhabitants of taiga settlements - soak saw cuts with a saturated decoction of larch bark. It will give the wood antiseptic properties and a pleasant red-brown color.

These cuts are ready to be laid

After the logs have dried, it is necessary to apply a waterproofing layer on their lower part. To do this, the bitumen must be melted in a metal bowl and the bottom of the workpieces should be dipped into it. This operation is not safe: bitumen is not easy to boil, and the temperature of the molten substance exceeds 200°C. You can use other ways to create a waterproofing layer:

Briquettes of bitumen, placed in a metal container, pour gasoline, leave for several days until a liquefied bitumen mass is formed. Process saw cuts in it, as in hot bitumen.

Cover the lower surfaces of the logs with Kuzbasslak.

Laying prepared logs on the base

Paving a path from trunk cuts

Now, there is very little left until the moment when you can be proud of the wooden path made by your own hands in the country. The most exciting, creative work on the installation of saw cuts is coming.

Scheme of the device of the trail from saw cuts

To fully realize your idea, you must do the following:

While the finished saw cuts dry out after impregnation, prepare a bed for them using the technology described above. Provide for such a thickness of the compacted gravel-sand "pie" so that the upper ends of the logs are flush with the surrounding soil or slightly protrude above it. If borders are planned, their role will be successfully played by higher saw cuts, wooden chopping blocks.

Make sure the bed is level using a level.

Start paving. Set each element in its place, pressing into the sand and leveling by carefully tapping with a wooden or rubber mallet. Control by level so that all slices are in the same plane.

Lay out logs according to any chosen scheme: from a single-row path of large-diameter saw cuts to a path densely paved with saw cuts of different diameters and configurations. It all depends on the artist's intention and the availability of blanks.

Fill the gaps between saw cuts with sand, crushed stone sifting, small pebbles with earth. Ground cover plants or mosses sown between cuts will decorate such a wooden path.

Decorate the edges: decorate with a decorative stone, cover with crushed stone, gravel or just soil and tamp well.

You can get ideas for decorating paths from wooden cuts by looking at the photo below.

Caring for a wooden path

To use the track from saw cuts for a long time, you will have to take care of it:

Annually clean off the dirt with a metal scraper, then treat with an antiseptic, drying oil or (if desired) cover with paints and varnishes for outdoor use.

Timely remove weeds that can disrupt the base of the coating.

Avoid flooding and erosion of the coating. For this purpose, you can install special grooves on the sides of the path or arrange grooves.

In winter, sweep away snow in a timely manner, to prevent the formation of ice on the surface. At the same time, it is worth refusing to use salt or other reagents for cleaning ice, which contribute to the gradual destruction of wood.

It is prestigious to have such a floor

Floors from wooden saw cuts - it's stylish

Having a supply of material for cuts and acquiring some skills in working with them, you can make an unusual floor from wood cuts - this is now fashionable. Depending on what will serve as the base of the floor, various methods of laying and finishing the floor covering can be used.

Floor made of sliced wood on a soil basis

If you need a floor on a soil basis (say, for an open terrace), you can build it exactly according to the same scenario as a saw cut path. But there are also differences:

Paving should be made as dense as possible, using saw cuts of different diameters.
The gaps remaining between the cuts do not need to be filled with bulk materials - the prepared mastic should be pressed into them (about it a little lower), leveling the surface with a rubber spatula.
After the mastic has dried and the surface has hardened, it is required to walk on it with a sanding machine. Then carefully remove the dust and polish the floor with linseed oil and wax or apply parquet polish.

Mastic preparation:

Soak 2 kg of clay.

Thoroughly mix it with 1 kg of slaked lime.

Add 1 kg of technical fat and 4 kg of small sawdust.

Mix until a homogeneous mass is obtained.

Laying saw cuts on a solid base

"Eternal" floor made of wooden saw cuts

Noteworthy is the option of an expensive, but truly durable floor, mounted on a solid base. At the same time, the height of saw cuts laid on a concrete screed or an old wooden floor can be significantly reduced. For this floor you need:

Level and clean the base.

Apply a polyurethane self-leveling floor to a small area of the base. Lay wooden slices as tightly as possible in this area. By the way, the sections made from the remnants of the timber will provide the highest packing density.

Go to the next section, repeat the previous operation.

After gluing the saw cuts over the entire base, wait for the polyurethane to harden and seal the joints with a mixture of polymer and sawdust.

Treat the dried floor with a grinder. Remove dust after sanding.

Pour in a polyurethane finish.

"Parquet" from the end saw cuts of timber

Lumber trails - simple and inexpensive

If the process of harvesting and laying saw cuts seems too complicated and lengthy, you can quickly and easily build a variety of wood paths for the garden using ready-made lumber: boards, beams of various sizes. The most straightforward option is panel flooring, which does not require time-consuming preparation of the base.

wooden garden path

For such a path, you will need planed edged boards of the same thickness (preferably and equal width), wooden blocks, a hacksaw, a hammer, nails. Flooring manufacturing process:

Mark the path, level the ground along the route of the path (fill in the holes, tamp, cut off the tubercles).

Saw the timber into segments with a length equal to the width of the path. Trim the boards.

Soak the boards and bars with an antiseptic, dry.

Treat the bottom of the boards and each surface of the bars with bituminous coating (or cover with Kuzbasslak), let it harden.

Place the bars on the ground at intervals of about 1 m, pin the boards to them, sinking the nail heads. Nails are better to use galvanized. Leave a gap of up to 5 mm between the boards for ventilation and water drainage.

Sew the shields together using the same bars. Treat the joints with sandpaper.

Paint the walkway using outdoor paint.

Walking path made of boards and gravel

Another design of a wooden path for the garden, simple in execution and does not require substantial costs. For her you need:

Prepare the base according to the above technology. But a trench 5-7 cm deep, covered with a sand-gravel mixture, is enough.

From the boards (beams), cut lengths equal to the width of the track. Process them in the same way that was used in the manufacture of shields.

Place the boards along the length of the base with an interval of short steps, press into the backfill, paint.

Plank flooring

As you can see, to create simple but spectacular wood paths with your own hands, special knowledge and skills are not required. Consider the recommendations, take a closer look at the photographs, turn on your imagination and decorate the territory in the country with original paths.

Floor from the end cuts of a tree - 2 ways how to do it yourself

Now such seemingly very simple at first glance floorings from wooden sections of logs - such peculiar stumps - have become very popular. They are used as decorative elements, objects for various arts, as well as for larger projects, such as paving paths in the garden and at their summer cottage, finishing all or part of the walls of the premises.

Some craftsmen have long tried to make a floor from wood cuts with their own hands for their own summer house or even an apartment.

They argue that the work is not at all as complicated as it might seem, but the result is striking in the natural expressiveness of texture and pattern.

Almost all the materials that surround us in a modern house may be beautiful and comfortable, but, to be honest, they are artificial, not always environmentally friendly, and sometimes even toxic. In our time, it has become very fashionable to use more natural materials, in particular wood, both in decorating the room, crafts, furniture, and in the manufacture of complete walls, floors, ceilings, even paths in the garden and in the backyard.

As you know, everything new is a well-forgotten old. End cuts have been used in home and garden decor for a long time. Both in rich houses and in simple village ones. They were laid in outbuildings, forges, on the streets, in houses in the form of parquet, but not the one that we know now, but the end. It was made in the large halls of palaces, from a variety of wood species, even interspersed with soft species, it looked excellent.

Do-it-yourself wooden floors from saw cuts

The advantage of saw cut floors is "naturalness", as well as low cost. The floors are very strong and hard, durable, have an excellent appearance. Make sure you can do it yourself. They are warm, well accumulate and retain heat from the battery, stove and just sunlight from the window.

This is a durable material, especially if you use special tools. For example, there are impregnations for protecting and preserving wood.

Real wood parquet will never go out of style. Today we will think about the production of a floor from wood cuts, radial or transverse cuts, otherwise they are also called end cuts.

The idea to make an original wooden floor with your own hands is in the air. As far as I know, there is far more than one option for implementing this idea. I made a selection of photos, as well as information on one topic - saw cut logs as a "floor covering". Maybe someone will be inspired by this idea and make an exclusive floor from wood cuts for their house with their own hands.

You will never get tired of looking at such beauty - the structure of the tree on each cut is so unique, it is a drawing of nature itself.

As you can see in the photo, cracked logs will also be used for work and what is called “non-standard” - tree trunks that are not quite round in cross section. In the intervals between the large ones, small ones will lie well - saw cuts of small branches and twigs.

Someone decides to use round saw cuts (“round saws”) for themselves, some even take them with bark, while it must be understood that there is a problem of filling empty areas between wooden circles and attaching them to the floor. This floor looks very decorative.

You can make saw cuts yourself, many in summer cottages have such an opportunity, and you can also buy them, now such blanks are very popular, in particular for the manufacture of various crafts and interior decor.

Some people want to get around this problem by using strictly geometric wooden blocks - for example, squares, rhombuses, hexagons in the form of "honeycombs", while the parts will fit together with almost no voids. But there is more work to process the source material, and it will take a lot of it.

In this age of new technologies, some have found a solution. Everyone knows self-leveling floors, which were first made in industrial premises, as well as in wet ones. Now there are lovers who have such a floor at home, it is good for the bathroom or kitchen, it does not require special care. Its advantage is that under a transparent bulk coating you can place a drawing, a collage with some interesting objects, I even saw floors with small coins along the entire length. I don’t know how much money it attracts, but there is undoubtedly a decorative element in such a floor.

Wooden saw cuts - laying and pouring technology

Now let's talk about the most interesting - the actual technology. Almost any tree species is suitable for work, but it is better if these are plants with a dense solid structure. As we know, for example, oak, beech, hornbeam have solid wood. In addition to hardness for wood, there is also the concept of stability, this is also important for what we are going to do. We do not take into account exotic species, and if we consider traditional species, then these two indicators are at their best in oak and walnut.

Trees such as linden, spruce, poplar, pine, aspen, cedar, fir have soft wood, they are not suitable for the production of floors. There is a measure of wood hardness, it is measured according to a certain Brinell scale. So, for the manufacture of parquet, only those trees are used that have at least an average hardness according to this very Brinell scale.

I think that it is clear that the saw cuts should be very well dried. No humidity is allowed.

Method 1

Here is a description of one technology. End cuts of logs 10-12 cm thick will do, but it's a matter of fantasy, you can take absolutely any, lay circles of different diameters in one floor. Lime, sawdust, wax, clay, linseed oil, lard, water will also be needed.

Laying as for a mosaic, with minimal distances between adjacent elements. Sand with small pebbles is poured on the surface with a layer of up to 10 centimeters. After that, the saw cuts are laid, pressing them into the sand, making sure that the upper level is approximately the same for everyone. How to fill the space between the round logs_ The “holes” are filled with a composition according to the consistency of the paste: 1 kilogram of fat, 5 kg of sawdust, 1 kg of lime, and about 2 kg of wet clay. They say that it is not bad to add marble dust or small glass fragments to the composition.

Carefully fill all the voids, as well as cracks in the cuts, allow to dry for 2 days. After that, the surface should be well polished, a scraping machine will not hurt. Polished with wax and oil.

Method 2

Here is another description of the process. Sawing wood cuts with a band saw. Lay them on plywood, gluing them with building glue. Fill the seams with a specially prepared solution, in which 20% sawdust. After hardening, it is polished with a machine, while the floor surface becomes even and the cuts are clean. From above, the floor with cuts is covered with sealant. I think the mortar is 80 percent epoxy based self leveling mortar. It is better to take a dark color, but then make sure that the dark color does not stain the surface of the wood.

I think, at the end, you can apply a topcoat, varnish, epoxy, polyurethane-based self-leveling floor.

By the way, some put saw cuts on liquid concrete, probably for greater reliability, as in the very first photo. So here everyone decides for himself what it will be more convenient for him to work with.

By the way, if you want the woody visible surface of the floor to have a certain shade, then this can be done, for example, with stain, immediately after leveling and grinding, before applying the final varnish coating.

In interior design nowadays, saw cuts are widely used to create very beautiful countertops, chairs, decorative wooden wall panels in eco style. Remember the cartoon about the hedgehog in the fog? There, the hedgehog talks about juniper twigs. It is better not to cover juniper crafts or artistic compositions on top with any varnish - they have an amazing aroma that lasts for many years.

A saw cut of a tree is an interesting material for creating all kinds of crafts, and it is beautiful in itself. Children enjoy burning and drawing on them.

What else I would like to add - the end parquet of transverse rounds does not have to consist of round mosaic components.

If you have a bar, square or rectangular in cross section, it will also be interesting, only there is a certain specificity here - the gaps between the parts will be smaller. Looks like real parquet. However, this is parquet, only made using a different technology.

Wood saw cuts in the interior - home decor ideas

In addition to the floor, the interior can be tied together with some other original decoration of the wall or its section, in the form of a spectacular panel or artistic composition, which will act as an art object. Not too thick branches will also find their use for making a large floor flowerpot in the form of a bottle for room decor.

Mosaic on the floor with examples of geometric elements of the pattern

The floors are different, wooden saw cuts are also a kind of “mosaic”, since they are laid according to the same principle. But then we'll talk about the classics. Simple as well as more complex patterns and ornaments with two, three, four color combinations of tiles. Samples photographed in the museum, these are the work of old masters.

Original handmade wooden tables

Unusual furniture, also made by hand, on your own, is best suited to such unique wooden floors. It will perfectly complement the interior. If you follow the link (a large selection of different options), then there, in addition to those in the picture, you will also see several examples of tabletops for tables with sawn wood.

http://dolgoli.ru

Categories

Popular