Do-it-yourself paths in the country, economy option. The cheapest options for paths to the country house Making paths in the country with your hands

The selection of a beautiful design of paths in a summer cottage does not have to be entrusted to a landscape design specialist. After reading this publication, you yourself will understand how to make various options for tracks in the country with your own hands. Consider the most popular ideas using improvised and purchased materials implemented by homeowners.

Economy option - bulk paths

Although simple, rammed stone stitches provide the following benefits:

cheap construction;
lack of puddles on the surface - water goes through the gravel into the ground;
a properly laid embankment has an attractive appearance, which is reflected in the photo.

Nice gravel path near the pond

It is difficult to build a gravel path on a slope, so for a sloping landscape it is worth choosing another solution. The second disadvantage is the need for constant care. Need backfilling, leveling, removal of sprouted grass

These works are carried out annually, usually in the spring, after the snow melts. To implement this inexpensive option, you will need small gravel or gravel, geotextiles and sand.

Advice. So that the rubble does not gradually spread to the sides, it is advisable to limit the edges of the trail with curbs made of concrete, plastic or old boards.

Foundation device step by step

Before you make bulk paths in the country, plan the yard according to functional needs. Simply put, draw on a piece of paper the paths to move around the site. For example, from the house to the pool, playground, toilet and pond. Determine the location of future flower beds, a barbecue area and a bathhouse, if one has not yet been built. Then draw paths on paper and transfer them to the area.

To get started, mark the tracks on the site in any convenient way - using twine and pegs or sprinkling with lime. Then remove the sod and proceed to the base device according to the instructions:

Making the finishing touch

In order for the path to serve for a long time and not sag from the load, it must be poured with an even layer of fine gravel and carefully compacted. Perform the operation in several steps, achieving maximum coverage density. Means of mechanization will help a lot - a manual roller and a vibrating plate.

Note. The finer the fraction of gravel, river pebbles or shale stone, the harder and more reliable the coating will come out.

There are no more tricks in the construction of bulk paths. Homeowners often lay such stitches between the beds in the vegetable gardens in order to calmly walk in wet weather. When laying in a country yard, there is a way to bring beauty: combine a gravel mound with flat stones or decorative slabs, as shown in the photo.

classic concrete walkway

A monolithic concrete coating is the most reliable and relatively inexpensive option. If the technology is followed during pouring, the structure will last at least 30 years. The main disadvantages are the complexity and duration of the process, because the concrete mixture hardens within 4 weeks. During the hardening period, the path cannot be used. Therefore, do not rush to plant flowers near the future path, where you will have to arrange a temporary passage.

An important point. Subsequently, the monolith can be used as a base for laying paving slabs or other coatings.

To pour concrete paths with your own hands, you need to prepare the base, as described in the previous section. Then proceed in the following order:

Advice. To prevent water from accumulating near the path later, dig a shallow drainage filled with gravel from one end.

You can beautifully decorate a concrete path at the pouring stage, using special plastic molds that imitate natural stone. The decor is implemented simply: a form is immersed in fresh concrete (preferably several), and pulled out after the initial setting. In order not to buy ready-made frames, smart craftsmen adapted to make homemade metal products, the technology is shown in the video:

Paving slabs

In terms of reliability and durability, the tile stitch is not inferior to concrete. There are 2 nuances: the material will cost more and requires proper installation. Therefore, ceramic bricks, which were in use or left after construction, are often used instead of tiles.

Having prepared the base of the garden path (the method is described above), lay bricks or paving slabs using this technology:

Reference. There are special polymer and acrylic compounds for filling joints that prevent the germination of weeds. Minus - the high price of protective mixtures.

If it is required to lay out a platform in front of the garage or in another place with an increased load on the coating, cement mortar should be used. Decorating such a sidewalk is easy: buy tiles of different colors and shapes. More information about the technology of paving tiled paths is described in the following video:

Wood stitches

If you have dry logs or hemp of various diameters at your disposal, you can pave a nice path in the country garden from wood. She loses concrete in durability, but wins in beauty and originality. To work, you will need a chain saw - gasoline or electric.

The manufacture resembles the folding of a wooden craft - a mosaic and is performed using the following technology:

Advice. It is important to correctly measure and select the height of the stumps so that they rest on compacted rubble and rise above ground level.

Use of polymeric materials

One of the most convenient solutions is ready-made plastic tiles measuring 57 x 57 cm, laid on a flat ground or directly on the grass without any preparation. Such a path can be laid and moved to any place in the country or removed for the winter in a barn.

Plastic tiles are connected manually with factory fasteners shown in the photo. Puddles on the path do not form, since drainage holes are provided in each element.

Another modern solution is a path in the country house made of modular rubber plates of various colors. The material is strong and durable, the laying technology is identical to paving slabs. Separate elements are additionally interconnected by means of plastic bushings. Curbs are also used rubber.

Note. These materials can be used in the interior of open gazebos and verandas as a floor covering.

Conclusion

We talked about the most common and affordable ways to build country paths. In fact, the choice of materials is much wider - natural and round river stone, shell rock and even tree bark. Only the first stage remains unchanged - the preparation of the base of the path. If this operation is done in good faith, then any coating will last long enough.

One of the inconveniences for a comfortable stay in a suburban area is dirt paths in the country, which, at the first rain, turn into a slippery impenetrable swamp, walking along them is one torment. Therefore, a modern suburban area should be divided into several zones, in order to facilitate access to each of them, it is best to lay paths that will help you move around the cottage without any problems.

All areas in the suburban area should be interconnected by a grid of paths. Pavement paths should consist of a base, cover, watercourses, curbs. The base of the paths is specially treated soil: a vegetative layer of 15 centimeters is removed from above and a layer of gravel, crushed stone, and broken bricks is covered. Sprinkle everything with water and tamp well.

If only sand was covered, then it will be enough to level and compact it. If you fill the channel with a layer of large gravel, fine gravel is poured on top, and then more sand and everything is carefully tamped. The top layer is laid out from stone or concrete slabs, it can be from broken bricks, so that it rises several centimeters above the ground.

In order to make a path in the country, you first need. When planning the lines of passage of the tracks, they mark them with pegs. The paths should be wide so that you can freely walk along them, roll a wheelbarrow or bring a bucket of harvest. Not everyone adheres to the principle that paths should be straight. Some people like it when the shapes of the paths in the country are different. To get to the right place in the shortest way, it is better to lay the paths straight.

Garden paths on the site

Winding paths can, if desired, be connected or come up with your own route along which you can move.

Some owners of dachas do it easier - they trample on which it is most convenient for them to move around, and only after that they ennoble them. Moreover, resources for landscape design can be found in any store, and they are available to almost everyone. Even, for example, rubber tracks, or plastic tracks for giving.

Country path from rubber modules

Before starting work, you can study the relevant sites on the Internet and familiarize yourself with the options for arranging tracks. An important factor is the desire to carry out such work. The paths play an important role in ennobling the entire territory and connect the individual zones of the site into one common ensemble.

When choosing a material, it is necessary to be guided by the composition of the soil, the climate in the region where the tracks are being installed. If you decide to lay out the paths with a tree, and the region is subject to frequent rains, then the tree will quickly become unusable. On clay soil, it is also better not to arrange wooden paths. A great option for a wooden path is to choose the color of a composite board that imitates the pattern of a saw cut of a tree trunk. This new moisture-resistant material is expensive and not everyone can afford.

A selection of material for the tracks

After you have decided and planned the routes along which you will move, the question arises - how to lay out the tracks? Since the types of paths are different and the material for the paths is selected depending on their purpose, the design of the buildings on the site is taken into account.

The design of paths in the country, as well as gazebos, verandas or open terraces, can be with the inclusion of fragments of stone or marble, patterned, red brick in combination with concrete slabs, large flat stones or iron ore. Any such material must have a rough surface so that you can walk on it in rain or ice.

Laying tracks

The coating is placed with a slight slope from the center to the edges for water to drain. When, due to the conditions of the relief, this cannot be done, then watercourses must be made on both sides of the path, and the path is tilted only in one direction.

Red brick for paths on personal or garden plots looks very nice. Burnt brick - "iron ore" - is laid on the base according to a pre-planned pattern. The prepared place is covered with a layer of sand, moistened with water and a brick is laid. Along the edges, the path can be equipped with a small curb of bricks located standing up or at an angle. Brick coverings are rammed with wooden beams, after which they are abundantly poured with water and allowed to mature.

Scheme of laying a brick path

Also, on a sandy base, paths are prepared from natural stone, which is selected from buta, specially created stones or crushed cobblestone. The material is durable and attractive. Stones of different sizes are stacked so that they are in close contact with each other. And if the paving of the path is carried out with large stones, then they need to be alternated at intervals of several centimeters. Sprinkle these intervals with soil and sow with grass, which is periodically mowed after germination.

If vehicles arrive along a flat-shaped natural stone path, the stone is laid out on a concrete base. The prepared recess is covered with small stone, pebbles or gravel, filled with water, rammed and covered with concrete, leveling the surface. A flat stone is laid on such a base, the gaps are filled with cement mortar.

How to lay concrete slabs with your own hands

Laying out a track from standard concrete slabs is quite simple. The base is prepared on a sandy base and the tiles are laid tightly to each other or at intervals, which are then covered with soil, sand or sown with grass. The surface of the slab should rise several centimeters above the ground, as the track may sag over time.

Preparation of the base along the guides

You can buy concrete slabs, or you can make your own. They make any shape, but it is recommended to make them more than five centimeters wide and about fifty centimeters long. Preparing a concrete slab is very simple. For the base, a metal sheet or plywood with installed formwork, which is filled with concrete, is suitable.

When the concrete mass has hardened, the formwork is removed, and the slab can be used for its intended purpose. The formwork is prepared in any shape from wooden bars. Sheet iron is also suitable for formwork, which is given a different shape - oval, round or imitating natural stone. The front surface of the plates is decorated with pebbles, pieces of colored glass, ceramic tiles.

To do this, with the help of glue, decorative inclusions are glued onto a sheet of paper, a form is set on top, poured with concrete, and when everything hardens, the paper is washed off. Plates are also given a relief texture using a metal sheet or thick wire. To add strength to such products, the tiles are treated with cement on top, and metal rods or wire are laid inside.

Often, for the passage of vehicles, concrete paths are laid out, which are double-track or single-track. Double-track tracks are placed parallel to the path 60 centimeters wide, they dig grooves and fill them with a layer of stone and rubble, having previously installed formwork from boards. The upper edges of the boards should protrude five centimeters above the ground. The formwork is leveled with pegs hammered into the ground and strengthened.

wide concrete walkway

Then the concrete mass is poured inside, and when it hardens, a border of soil is placed along the edges and covered with sand, pebbles or sown with grass. Pedestrian paths are made in the same way, the surface can be decorated under concrete slabs or in the form of natural stone.

Recently, summer cottages, from ordinary vegetable gardens with beds, are turning into places of rest after working days. Therefore, many owners try to make their stay in the country as comfortable as possible. One of these amenities is the presence of beautiful, comfortable paths. Usually, their arrangement requires considerable capital investments, and reducing the cost item is an important point for many. You can make the paths along with your own hands, which will help reduce their cost. What to make tracks at the cottage is cheap? We offer you to consider several interesting options.

Paths in the country cheap

Paths in the country are cheap - what to use?

There are several inexpensive materials, some of which can be found on your territory:

To do this, you can use old cut trees from your own dacha. Saw cuts must be at least 12-15 centimeters thick and processed from the bark. Then they should be coated with drying oil for durability. At the site of the future track, the soil is removed about 40 centimeters. This place is covered with geotextiles and sand is poured on it, which must be moistened. In the wet sand you need to drive saw cuts, as close to each other as possible.

saw cut tree

The largest ones should be placed at the edges to give strength. If there are a small number of saw cuts, then they can be placed at some distance, and the gaps can be covered with gravel or rubble. Especially harmoniously, such paths will look if all the buildings are made of wood. Plus, it is also the most environmentally friendly material.

Paths from ordinary cement mixture . This coating is durable, saves from weeds and is not very expensive. Recently, special forms for pouring have appeared on sale, using which you can give originality to your site. To make a concrete path, you will need one part sand, three parts cement and water. Before pouring, it is necessary to level the area under the track and spill it with water. A form is placed in this place, previously lubricated from the inside with used oil. The form is filled with concrete mortar, the excess mixture is carefully removed.

Inexpensive option - bulk paths made of gravel, pebbles, crushed stone . If possible, the material can be selected in different colors, which will make the tracks brighter. Laying such tracks is the least laborious. It is necessary to remove the top layer of soil, install borders and fill in the material. Borders can be made of brick, or poured with concrete mixture.

Some economical summer residents install fences from old plastic bottles, bottoms up, which can be painted with any paint. Backfill material before laying is recommended to be treated with herbicides to prevent the appearance of weeds. Such paths are well suited for areas with a slight slope. If necessary, they can be easily poured and strengthened on the slopes by laying a transverse board.

As alternative and cheap materials, someone uses glass bottles , placing them upside down and driving into the ground, large fragments of old ceramic tiles. Those who are not afraid of the duration of the process, even invest tracks from multi-colored plastic bottle caps. It looks very unusual and bright, as it allows you to create any pattern.

So, now you know what to make tracks from. at the cottage cheap. To give a more well-groomed appearance to the site, various flowers or curb shrubs can be planted along the paths.

See also video:

How to make a soil mixture for different types of seedlings ...

(18 ratings, average: 4,25 out of 5)

Neatly laid sidewalk paths, gracefully intertwined between green spaces, are an essential attribute in any garden. If you want your summer cottage to be really complete and well-groomed, in no case should you neglect the paths. Fortunately, for their device you do not need to attract professional designers and spend a lot of money, as you can make beautiful paths in the garden with your own hands.

Walkway made of wood

Wooden saw cuts

Wooden round logs are a fairly simple material for garden paths. The raw materials for this can be found in any garden - for sure, old trees grow everywhere, which it is high time to replace with new seedlings. Wooden paths are made according to the following scheme:

Cut round logs 20-50 cm in diameter and 20-30 cm high from the wood you have. The blanks should be the same.
Remove the bark from them and dry them in the sun for several days.
Cover the blanks with antiseptic and primer to protect them from moisture and insects. Leave the rounds to dry for one day.
Remove the soil along the entire length of the future path to a depth of 4-6 cm. Pour a small sand cushion and compact it well.
Start laying saw cuts, alternating small and large workpieces so that there are small seams between them.

When choosing wood, it is necessary to proceed from how healthy and durable it is. This will determine how long the path made of saw cuts in the garden will last. It is advisable to give preference to solid types of wood. For example, oak will last about 10 years, pine - no more than 7. Round logs of old trees can be eaten by insects or rotten.

As practice shows, you don’t have to choose much - they use what is at hand. And if it turned out that after some time some saw cuts collapsed more than the rest, then they can always be replaced with new ones.

For the sidewalk, it is advisable to choose dry logs. If the path is not made for a decorative purpose, but in order to walk along it, you do not need to cut the wood into thin rings.

Advantages and disadvantages

Garden paths made of wood have their own advantages:

The main disadvantage is fragility of wood. Over time, it rots, especially in a humid climate or in places where groundwater is high.

Boards

As a material for paths in the garden, you can choose wooden planks. As a rule, such a path is laid in the form of a continuous flooring. This can be done both in the longitudinal and in the transverse direction. To make the path winding, the edges of the boards are cut or placed in a special way. Using this approach, you can model different options - for example, a pattern similar to parquet.

If the boards are placed at a certain distance from each other and the space between them is filled with gravel or backfill, then the path will resemble railway rails.

You can make a path from the boards, which are laid out with solid flooring. This design is made raised from the ground by about 15 cm. Thus, the boards will not have contact with the ground, and the air space will allow the wood to dry faster after rain, which greatly contributes to the long-term operation of the material.

It will take a lot of effort and effort to make a garden path out of wooden elements with your own hands, but in the end could be a real masterpiece.. This path will be an extraordinary and beautiful addition to the design of the garden.

Masonry

One of the most reliable options is natural stone paths. In this case, you can choose a boot or cobblestone - they are equally durable. Laying stone on paths produced in this way:

Make a marking of the future path.
From the site where the paving of the path is planned, remove the top layer of earth. The depth of the layer is required by 8-12 cm more than the size of the largest stone that is prepared for the path.
Fill the resulting trench with a layer of sand of 12-15 cm, level it well and carefully compact it.
Lay the stones alternately on the sand cushion, pressing them tightly into the base. The step between small stones should be no more than 3-4 cm, and between large ones - 7-8 cm.
Pour the remaining space carefully with concrete mortar. When the concrete is dry, backfill the joints with fine sand or earth to make them look more natural.

Advantages of a stone path

Paving stone garden paths makes it possible to save the builder money and makes you feel like a real landscape designer. Moreover, this process is not so complicated and responsible.

The most important thing before you start choose the design of garden paths and decide on the scheme of their paving, highlighting the main sections where these paths will lead. These can be gazebos and outbuildings, flower beds and lawns, children's sandboxes, technical facilities and barbecue areas, alpine slides and artificial ponds.

As a rule, the width of the paths is chosen so that a garden cart can easily pass. Depending on the type of path, it is constructed with or without a curb. The track can be level with the ground or rise above it. In everyday life, the first option is more convenient, while the second is better in terms of cleaning - less sand or earth is applied this way.

The path in the garden can be paved on a concrete or cement base. In addition to natural stone, you can choose paving stones, paving slabs, decking, clinker bricks, composite boards, concrete poured into special forms, artificial stone.

The modern design solution is a geogrid, that is planting small lawn grass between parts of the structure.

pouring concrete

Concrete is a traditional material for construction, which is always popular due to its ease of use and its low cost. Build a cast path anyone can definitely:

Mark the boundaries of the path, drive in pegs along its contour and pull the rope.
Dig a small trench within the marked contours. Depth approximately 25 cm.
At the bottom of the trench, pour a layer of gravel and sand 10 cm. Tamp this pillow.
Cover the pillow with a "chain-link" or any available metal mesh.
Build formwork around the perimeter of the path.
Mix the mortar: 1.5 parts sand, 1 part cement, 1 part water and 2 parts gravel.
Pour the cement composition and with vibrating movements, evenly, with a spatula, distribute the mixture over the entire area of \u200b\u200bthe path. During pouring, pierce the mixture with a rod to release the remaining air.
Using the rule, make a final alignment and cover the track with a film.
In 4-5 days the path will be ready. All this time, it is necessary to moisten it slightly with water so that the concrete gains maximum strength and does not crack.

Car tires

Tires from cars have long been widely used in summer cottages: swings, ponds, flower beds are being built from them, and now they are also laying paths. This trend is quite understandable, given the performance of this material: tires are easy to care for, resistant to temperature extremes and moisture, are durable and non-slip. You can make a garden path out of them in this way:

brick paths

Best to apply clinker products because they are highly resistant to various kinds of mechanical and chemical influences. The most important thing is that the bricks should be intact and without chips, otherwise the path will come out not only unattractive, but also unsafe.

Laying the path goes like this:

Mark the path: drive a peg around the perimeter and stretch the rope.
Dig a trench along the contour - a depth of 20-30 cm.
Along this trench, install limiters from boards or bars.
Pour a 15 cm layer of gravel into the space between the limiters and compact it well. Pour a layer of sand on top of about 6-7 cm.
Remove the limiters and make curbs instead: on both sides of the path, lay a row of bricks set "on edge".
Form the inner space of the path from bricks: laying takes place in the usual position with the help of careful tapping with a rubber mallet or wooden spatula.

Recommendation: bricks do not have to be laid out close - to give the path originality, you can leave small gaps and fill them with pebbles. In addition, you don’t even need to fill up the seams - after a certain time, grass will sprout here and decorate your path.

paving slabs

Although tile can hardly be called a very cheap material, it is still used quite often for the construction of garden paths. There are several reasons for this: ease of work with the material, excellent performance and aesthetic appearance. But the most important thing is the ease of installation.

Mark the boundaries of the future track with stakes and rope.

A path is an indispensable element of any suburban or summer cottage, which, in addition to practical benefits, can also deliver Aesthetic pleasure. By following simple instructions, you can implement any of the options described above on your site, so feel free to start working, discovering new opportunities for ennobling your backyard.

The overall impression of the suburban area will be incomplete if it is not decorated with beautiful and comfortable garden paths. Not only the appearance of the territory, but also the organization of economic activity depends on how well they are located and well made. Paths in the country can be made of various materials and in different ways.

The choice of material for the track in the country

Many summer residents are wondering: what is the best way to make paths in the country? The answer to this question depends on its size and material capabilities of a person.

Some paths made from improvised materials have a more attractive appearance than traditional ones made from concrete or concrete slabs. Paving in the country should be economical, practical and durable. The material for country paths can be very different. Most often, common improvised and building materials are used for their manufacture. In recent years, people are increasingly producing. All materials used for this purpose may be different in color, texture and decorative effect. Most often, tracks with a compacted surface layer or with a hard surface are made on their own.

Photo paths in the country is simply amazing with its diversity. The simplest - rammed paths are made of sand, pebbles, gravel, brick breakage. Some summer residents use wooden saw cuts to complete this element of their summer cottage, which give it a special decorative effect.

For this purpose, only hardwoods treated with special impregnations are used.

Video: making a country path from stumps

The hard surface can be made of brick, natural stone, concrete slabs, paving slabs or cast-in-situ concrete. Various patterns can be made from such material, which will give the site an additional decorative effect. Such a track is much stronger and more durable than rammed ones. It is distinguished by its practicality, but it costs much more than the one made from improvised materials.

An important role in creating a path in the country with their own hands is played by the curb. It not only fixes clear boundaries, but also protects its edges from destruction. The border also plays a decorative role. Although a curbstone is a desirable element, it is not considered mandatory. Most often, without a curb, paths are made of concrete slabs with large gaps between them and natural stone with a curvilinear configuration of the boundaries.
When covering sand, pebbles, slag, gravel, a curb is necessary. The most practical and durable concrete curb laid on a concrete base. For curvilinear paths, it is better to choose borders made of brick, flat stone or tiles laid on edge.

By choosing the right material, you can create a harmonious path system, made in the same style and blending perfectly with the overall look of the site.

So for decorating a site in a rustic style, a tree is most suitable.
Natural stone is ideal for making curved paths.
Brick is wonderfully combined with buildings made of it. To make paths, special types of paving bricks are chosen that are not afraid of moisture and cold.
Paving stones of different shades allow you to create unique patterns.
Paths made of gravel and pebbles are most suitable for garden areas and near artificial reservoirs.

In recent years, people have the opportunity not only to create paths from monolithic concrete, but also to give it an original shape. To do this, it will be enough to buy plastic templates of various configurations in a specialized store, which will allow you to cast concrete elements on your own.

Some of the materials used to make the tracks are perfectly combined with each other. They combine so well:

concrete and brick;
river pebbles and wood;
multi-colored gravel and natural stone.

Country path planning

Before you make paths in the country, you need to correctly draw up a diagram or plan of the site, on which to depict the planned directions, taking into account all the buildings and plantings located on the site.

When developing them, one should take into account the amount of precipitation that falls in this area. Sometimes it is necessary to create a drainage system so that there is no stagnation of water in the area. It should also be remembered that excess water during freezing quickly spoils not only wood, but also materials such as concrete and brick.

Large trees should not grow near the paths, as they can destroy them with their powerful roots. When drawing up a more detailed plan-scheme, a picture of the country landscape will be more clearly presented and it will be easier to make a choice in favor of one or another building material.

For almost all types of country paths, one technology for their laying is observed. All work is divided into several important stages:

Site marking. At this stage, with the help of a cord and pegs, the contours of the track are marked. The edges are carefully drawn along the outlined lines.
With the help of a shovel, the sod is removed along the length and width of the intended path. The soil is taken out to the thickness of the sand cushion, which serves as the basis for paving. The thickness of the base layer must be at least 10 cm.
Sand (sometimes crushed stone) is poured into the dug trench and it is carefully compacted and leveled.
Paving is laid on the sand, carefully monitoring the observance of the level of the track.

Do-it-yourself budget tracks in the country

The following track options are the most popular in the country:

Path of gravel or small pebbles. They are made very quickly, but they do not differ in durability. The soil in the trench is treated with herbicides and covered with polyethylene or agrofiber so that weeds do not germinate. A layer of pebbles or gravel is poured on it and the surface of the track is leveled. In order for this material not to crumble over the site, it is necessary to create a border, for example, from tiles or bricks.
Walkway made of wood saw cuts. To create it, trunks and thick branches of sawn hardwood trees are suitable. They are cut into circles. The thickness of the material should be more than 10 cm. Well-dried saw cuts are treated with hot drying oil, which is applied with a brush over the entire surface. After the impregnation has dried, the treatment is repeated. A plastic film is laid on a pre-prepared sand cushion. Saw cuts are laid on it with any fantasy pattern and leveled. All voids between them are covered with gravel, sand or soil.
A country walkway made of stone can be made not only from purchased material, but also from what can be found in almost any area. When choosing elements, preference should be given to the stone that has at least one flat side. Under such paving, the trench should have a depth of at least 20 cm. Crushed stone (10 cm) is poured onto its bottom. It is compacted, and sand (10 cm) is poured on top and compacted again. Stones are laid on the prepared sand and gravel pillow. To fill the voids between them, sand is poured from above and all the voids are filled with it. At the final stage, the path is thoroughly watered. It may be necessary to refill the voids between the stones with sand.
Paving stone path. This option is one of the best. The depth of the trench for such material should be 20-25 cm. The sand-gravel cushion is created in the same way as under the stone path. Paving stones with a thickness of more than 60 mm will protrude above the soil. This path is best done with curbs. Paving stones are laid on a sandy base tightly to each other. In this case, the pattern can be the most diverse. When laying, pavers with signs of marriage should not be used, as they will quickly become unusable.
Brick path. It is created according to the same principle as the pavement path. The same brick placed on edge is used as a curb. Paving made of bricks of various shades looks especially attractive.

Concrete path (video):

concrete walkway

Paths in the country from monolithic concrete are still popular. Their manufacture requires a large amount of cement, sand and gravel. But they are durable and practical. When performing them, one rule should be remembered: the more cement in the solution, the stronger the concrete will be. For tracks, the following proportions of materials are most often used:

cement - 1 part;
crushed stone - 3 parts;
sand - 2 parts.

In order for such a path to rise above the ground, it is necessary to make a formwork from the boards under it. Stones, broken bricks or other solid construction debris are laid out at the bottom of the trench. The solution is poured into the formwork and its surface is leveled. Concrete can be decorated with tiles, mosaics or beautiful stones pressed into the uncured mortar.

Tiled walkways

Paths made of concrete slabs of various sizes are very popular. They are easy to fit and are durable. A sandy base is also arranged under them. A country path made of tiles 50x50 or 40x40 cm looks quite impressive, does not take up much space and is very practical. When using smaller tiles, different paving patterns can be created. They can be laid close to one another or at some intervals, which are covered with small stone or soil. They can be planted with grass.

Country path (video)

Categories

Popular