What can be done from plastic ties. Clamps (ties) from plastic bottles. glass mug

When one tie is not enough, and there are no others at hand, you can make one long clamp by simply connecting several short ones together.

2. Get rid of sharp ends

After cutting with wire cutters or scissors, the ends of the ties are quite sharp and can hurt. This is easy to avoid if you do not cut, but break the ends, twisting them with pliers.

3. Break ties without a knife

Plastic ties are considered one-piece fasteners, but in fact they can be opened. To do this, you need to carefully open the latch by lifting it with a pin, tweezers or other thin object.

4. Reuse zip ties

The tie can be reused if you cut it as far as possible from the lock and remove the cut end. The length will decrease, but the collar will still work.

5. Store your zip ties in a bundle.

Ties are inconvenient to remove from the bags in which they are sold. And if you store these things in bulk, they get confused. An easier and more convenient option is to fasten the ties into a bundle.

6. Or blocks

Another good option is to string several ties on one and store them in the form of such cassettes. They are easy to remove and fold very compactly.

7. Tidy up your cables

Ties can not only tie up. With their help, it is easy to organize cables into neat bundles that do not tangle and are conveniently attached to a table or wall.

8. Make a Smartphone Stand

From two clamps of suitable length, it is very easy to build a phone in haste. To do this, it is enough to pull the gadget along the edges, releasing the ends of the ties back and using them as an emphasis.

9. Use zip ties as a binder

Do you urgently need to fasten several sheets, but, as luck would have it, you don’t have a folder at hand? Use screeds, they are just as good! True, if you need to add more sheets, the clamps will have to be cut.

10. Fix the zipper

Using a lock with a broken tongue is still a pleasure. One of the easiest ways to fix it is to install a plastic tie on the slider, make a ring out of it and cut off the free end.

11. Make a gimbal for your smartphone

Is the outlet high up and the phone is hanging in the air while charging? Make a simple suspension for it, which will be attached to the power adapter.

12. Replace broken curtain ring

One of the broken rings on a shower curtain (or even a regular one) can easily be replaced with plastic ties. Pass them through the holes, throw them over the bar and cut off the excess ends. Ready!

13. Make a potholder for the lid

It is easy to make a convenient tack for the lid of the pan from an ordinary plastic clamp. Just tighten it on the handle. Now you can lift the lid while cooking without fear of burning yourself.

14. Attach a bunch of keys

Who said keys have to be on a metal ring? A bunch on a plastic clamp is no worse. Yes, to remove or add a key, you have to cut the clamp, but usually such a need does not appear often.

15. Make a dog leash

Even from small plastic collars, you can build a leash for small breeds. Make rings and connect them into a chain of the desired length. For the handle, leave a larger ring, and attach the other end to the collar through a carabiner.

16. Store cables properly

Always tangled charging cables and headphones are easy to put in order using a simple plastic tie organizer. To do it, just insert the end of the clamp into the lock with the non-working side.

17. Make a Bubble Stick

When the stick from the kit is lost or broken, it can be replaced with an analog made from a plastic tie. It is made very simply: just thread one end into the lock and form a ring.

18. Fix the cabinet handle

When there are no screws or a screwdriver at hand, you can quickly fix a broken drawer cabinet handle with zip ties. Fix them in the holes, and then connect them together.

19. Make bicycle spikes

If you don’t have studded tires, but you still want to ride on snow and ice, you can build an impromptu spike from clamps. Just wrap them around the tires, cut off the protruding ends - and go.

20. Use zip ties instead of fishing line

Running out of trimmer line and need to mow your lawn urgently? No problem! Just load a couple of larger screeds into the drum.

21. Make a cool lampshade

Plastic ties can be used not only as fasteners, but also as an element of decor. Make a frame from a mesh, hang it with multi-colored ties - it will turn out to be creative for a lamp or chandelier. True, it will take a lot of clamps and the same amount of patience.

22. Clean the sink drain

With the help of a conventional screed, blockages can be easily removed. To do this, you need to make notches along the edges with a knife or scissors to get burrs that, when turning the screed, will cling to hair and other debris from the drain.

23. Fix the latch on the network cable

If you do not want to re-crimp an Ethernet port with a broken latch, a plastic tie will help out. Cut off the lock on it to reduce its height, attach it to the place of the old latch and insert it into. For reliability, you can fix the impromptu latch on the cable with another tie.

24. Use zip ties for crafts

Plastic ties are an ideal type of fastener for various crafts. With their help, for example, you can make a pretty mat out of a leaky garden hose. And if you add a border along the edge, you get a practical basket for leaves and other needs on the site.

25. Fix a tire puncture

When you don't have a patch handy, you can use two zip ties to repair a punctured tire in an emergency. Remove the inner tube from the tire, locate the hole, and then simply tighten the two zip ties to separate the punctured area.

October 11, 2018
Specialization: master in the construction of plasterboard structures, finishing work and laying flooring. Installation of door and window blocks, facade finishing, installation of electrics, plumbing and heating - I can give detailed advice on all types of work.

Everyone has seen and knows cable ties, but not everyone knows how to use them in everyday life. I will talk about several interesting ways to use plastic ties and show good examples.

Method 1. For decorative caps

These caps are attached to the wheel rim with a spring clip, which allows you to quickly remove and put them on. But there is a risk that the caps can simply fall off on the road. To avoid this, you can fix them with cable ties in several places.

Method 2. Baggage tampering alarm

Want to quickly determine if your luggage has been opened at the airport or train station? Just pull the runners together with a regular tie. In this case, it is better to use screeds of bright colors.

In everyday life, white or black screeds are most often used. Therefore, even if the criminal knows such methods, he is unlikely to have a ribbon of the right color. And most likely he will simply refuse the idea of ​​opening the suitcase.

Method 3. Wire marking

Colored ties will also come to the rescue when you need to quickly disconnect an electrical device from the network and understand which cable belongs to it. In order not to get confused in wires, cables and plugs, proceed as follows.

Put 2 cable ties of the same color on each wire. Fix the first one directly near the electrical appliance itself, and place the second at the plug.

Method 4. Fixing tools

Round tools and parts (whether it be a screwdriver, a drill, etc.) strive to roll off a table or workbench, one has only to slightly touch them. To solve the problem, put a coupler on each of the tools, and cut off the free end.

This way, the pieces will always stay exactly where you put them. And if you wish, you can choose screeds of the same colors for specific types of tools - so it will be easier for you to find the one you need.

Method 5. Marking the drilling depth

Another practical use of screeds is that they can become a kind of level when drilling. Fix it at the right distance from the edge of the drill, and the screed will be able to indicate when it is necessary to stop drilling.

Method 6. Spikes for a bicycle

If you often have to ride your bike on bad roads or in winter, then it's time to get a set of cable ties. They will improve the grip of the wheels with the road surface and make the ride more comfortable.

Advice! It is better to place the latch to the left or right of the tire, but in no case on the front side of the wheel. The screed can easily fray or push through the rubber.

Method 7. Shoes in ice

Connect several ties together, as shown in the photo, and tighten winter boots with them. The same principle works here as with bicycle wheels - ties improve grip on slippery surfaces.

Method 8. Lamp decor

Cable ties are good not only from a practical point of view, but also from a decorative one. With their help, you can even create a decorative lampshade. And here you are limited only by your imagination.

Method 9. Drop-down sockets

After many years of operation, the fasteners in the sockets can break, after which they begin to fall out of the niche in the wall. And again, a plastic screed will come to the rescue! Its fastener and the edge of the tape can become an additional fastener.

The action plan is simple: wrap the tie around the screw, tighten the mount, and cut off the excess.

Method 10. Plant support

Ties can also be useful in gardening. To help and support young plants during their growth, place a stake in the pot and tie the stem to it with a coupler.

Method 11. Route marking

In hiking trips, screeds of the same color can indicate a particular route. In the process, it is better to use fasteners in bright colors (for example, yellow or orange), which will be clearly visible against the foliage.

The ties will hold up well in any weather, they won't fall off or rot no matter where you fix them. And when you no longer need them, just cut off the clasp with a knife.

Method 12. Loop for the cord from the lamp

Form a loop on the cord from the pendant lamp and fix it with a tie. After that, you can hang it on the ceiling, adjusting to a comfortable height for you.

Method 13. For reuse

Many people mistakenly believe that ties can only be used once. In fact, if necessary and when there is no new fastener at hand, you can reuse the old one.

Insert a needle or other thin object into the ratchet and press the latch, then simply pull the tape back.

Advice! Please note that a reused tie is no longer very strong, so it should be replaced as soon as possible.

mikeasaurus shared his experience from www.instructables.com.

October 11, 2018

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

Plastic ties have long and firmly entered our lives. But, despite this, many still use them for their intended purpose - to connect many danglers into a bundle. However, there are a number of ways to use them non-standard, which will be described in today's article. For some, they will seem banal and well-known, but for some of our readers, this review will be a real discovery. In addition, looking at the variety of colors of plastic ties offered on Russian shelves, it is quite possible to beat some products in a way that any designer would envy.

Read in the article

The easiest ways to use a plastic screed

I would like to start today's article with the most elementary methods, gradually approaching those that can amaze many with their unusualness. For example, plastic ties can be used to tie tomato or raspberry seedlings to pegs in the country. This does not even require a developed imagination. Everyone can tie the bushes, and therefore it is not worth dwelling in detail on how to do this.

Key ring

Often spare keys are in some container without a ring, and some are completely scattered throughout the house. In this case, a plastic screed is indispensable. Especially if, along with spare keys from one lock, there are also from others. Different colors of plastic will help you quickly find the right bundle. But, which are used on a daily basis, this method should be used with caution - the screed has a bad "habit" to break at the most inopportune moment.

lock on suitcase

Modern suitcases have a rather necessary function - dogs can be fastened with a small lock to protect the contents from people who are not quite clean at hand. This is a great help when traveling by train, where in the crowd of the station it is easy not to keep track of your luggage. The problem is that the keys to these locks are very small and often lost. This is where a plastic tie comes in handy. It can be used instead of a lock. Of course, the protection will not be so reliable, but it is unlikely that the thief always keeps a tool with him, which can be used to bite through the plastic, and it cannot be quickly cut with a knife.

This also includes the option of repairing a dog, from which the tongue flew off, which happens quite often. It is enough to thread the screed into the hole and tighten, and then cut off the resulting tail to the desired length.

Binder of magazines and newspapers or folder for papers

Sometimes it is necessary to sew papers into one pile so that they do not roll around the table. There is no problem when a folder is at hand. And if not? Then plastic ties come to the rescue again. With their help, you can easily sew a different number of documents by making holes in them with a hole punch or by decomposing the sheets into plastic folders that already have devices for connecting. The second option is, of course, preferable. The crusts are made from ordinary cardboard, cut to size.

Repair broken curtain rings in the bathroom

The problem of damage to the rings on which it hangs is known to many. The same plastic tie will help to solve it, which is threaded through the hole in the curtain and tightened to the required length of the ring around the bar. Here everything is also quite simple.

Solving the problem of placing a smartphone when charging and in other cases

Charging a smartphone is a sore point, especially if the cord is very short. In this case, you need to make 2 loops. The size should allow you to freely put them on a smartphone. After that, they are interconnected by another screed. Now you can attach them to your gadget. The power supply of the charger is inserted into through the connecting ring. Now the smartphone is hanging on the charger and does not interfere with anyone, the wire is located freely, there is no stretch.

Another option is to use ties as a stand for a gadget for watching video files. 2 rings are arranged so that their locks are on one edge of the smartphone. Then, resting the gadget on protruding tails, you can free your hands.

Cord for lawn mowers

Winter bike aid

If you tighten plastic ties around the entire wheel at a distance of 5 cm from one another, then it becomes possible to ride in winter without fear of falling. Ties will improve grip on the surface. Of course, they won’t help on a flooded ice rink, but on an ordinary winter road they will help out a lot.

A gift for a girl: an interesting "Hand Made"

If you apply a little creativity and give free rein to your imagination, you can not think what to buy a girl for March 8 or February 14. The child will not be left out either. Plastic ties will help to make a toy for him. You just need to let your imagination run wild. And what will come of it is up to the master to decide. Sometimes things can even turn out that look more interesting than intended. You can verify this by looking at the photo below.

Belt badge

When the buckle on your favorite belt breaks, it is comparable to a disaster for many. The same plastic screed will temporarily help out in such a situation. If it is threaded into the tongue ring and tightened to the required size, the bow problem will be solved.

Viking style beer mug

For today, this is the last and most, according to the HouseChief editors, an interesting item that can be made using plastic ties. Everyone can make a beer mug from a can and collars. She will look quite unusual. To do this, you need to cut off the top cover from an ordinary tin can. In this case, it is better to bend the edges so as not to cut yourself. After that, a carbine is taken - its dimensions are selected depending on the hand. It remains only to pull it to the bank in 2-3 places and the Viking mug is ready.

Finally

In fact, the methods of using plastic ties listed today are only a small part of what can be made from them. After all, everything here depends on imagination and the presence of hands growing from the right place. But do not forget why, in the first place, we need plastic ties. It will be very unpleasant for the home master when there is a real need for clamps, and they are not at hand due to the manufacture of various crafts from them.

We hope that today's article was interesting and useful to our reader. If you have any questions on the topic, you can ask them in the comments below. The HouseChief editors will try to answer them as soon as possible. Perhaps someone has more interesting ways to use plastic ties. In this case, please write about them in the comments below. This information may be useful to other readers. And finally, we bring to your attention a short video. Perhaps from it you will learn something new on today's topic.

A plastic tie, clip or clamp is used during installation to fix various elements. It is practical and greatly simplifies the work. However, this product can also be used to solve various household problems.

1.Distribution of wires with fixation

We make a standard clamp of several wires using a plastic tie, but do not tighten it. We distribute the conductors in one line. We also insert a tie between the wires, which will be perpendicular to the first clamp. So we do with everything between all the wires. Excess ends must be trimmed after tightening all fasteners.

2. Drawer handle

We fold the plastic puff into a loop, which we bend in half so that it can be pushed through the hole for the handle. Having installed two ties in the place of fixation in the box so that their locks remain inside, we connect the outer loops with an additional clamp.

3. Phone stand

We make two loops of screeds. Their diameter should be such that a mobile phone can be inserted into them. We put them on our device so that the tips after the lock remain behind and serve as a support.

4. Hanging surge protector

We tighten the two ties on the surge protector from both sides. We insert one more clip into them, making small loops. We will use them in order to hang the structure on hooks.

5. Wire clamp

We make a sliding loop from a plastic tie, after cutting off the latches at the end. It can be used as a reusable clip for easy wire storage.

6. Mug from a glass

So you can get a mug for cold drinks, but you need a glass that expands upwards. We tighten two plastic clamps on the machine in places 3 cm away from the bottom and top. We stretch three puffs through the resulting rings, which we connect one by one into a ring, making it look like a handle. We cut off excess elements, giving the product a good aesthetic appearance.

7. How to properly cut the tip of the puff

This is usually done with scissors or wire cutters. However, then there will be a small tip with sharp edges, which can cause injury. That is why this operation is best performed with pliers. To do this, they clamp the tip under the very lock and remove it with a rotational movement.

8. Economical and safe puff cutting

Most often, they try to cut the puff in the middle. In this case, there is a high risk of damaging both the hands and the material being fixed. Also, after such cutting, you have to throw away the used fastener. If you cut the puff just under the lock, then it can be reused. This method is more secure, since there is always a supply of free space in this place.

9. Extension

All puffs have a certain length. Therefore, they are suitable for fixing strictly defined objects in volume. It is not recommended to use the tightening at the maximum possible diameter, since this way there is a high risk of it coming out of the interlock. It's better to just use two latches, inserting the end of one into the lock of the other.

10. Puff release

Quite often there are situations when such a latch is tightened idle. Most people then throw out the puff. However, there is a way to open it without damage. To do this, a latch in the lock is bent with a thin metal object, and the tips are pulled back.

11. Hanger for delicate items

You will need a regular wire hanger, five plastic spring clothespins and five plastic ties. We insert a latch into each clothespin, which will connect it to the bottom bar of the hanger. So we get “hangers” with five clothespins, with which you can carefully fix delicate things.

12. Pillow drying hanger

We connect the wire "shoulders" to each other in the middle of the lower crossbar. Then we stretch the hangers, giving them a rhombic shape. The pillow is dried by clamping between two folding "shoulders", hanging them.

13. Shower curtain rings

You can replace the shower curtain rings with plastic clips. To do this, they are threaded into eyelets, fastening with a lock, creating a kind of ring. All unnecessary elements must be removed so that they do not cling to the material during operation.

14. Key ring

You can replace a regular key ring with a standard plastic clip. It is enough to fix it on the keys without making a strong tightening.

15. Flask from a bottle

Using a small plastic bottle, a puff and a carabiner, you can make an inexpensive and practical flask. To do this, you will need to use the plastic ring left when you opened the lid. If it is not there, then we create this element ourselves, applying a puff. We put a latch under the ring, closing it with a lock. So we get a strong loop that can withstand a lot of weight. For it, with the help of a carabiner, we fasten the flask to the belt.

16. Protection of the lighter from arbitrary keystrokes

To avoid accidentally pressing the lighter button in a bag or backpack, you need to install a special lock on it. They make it from a plastic clip that surrounds the lighter under the button itself, blocking both its arbitrary and deliberate pressing. The device can only be used after the lock has been removed.

17. Plastic binding

If you have sheets that are stapled with a plastic spring, but it itself is missing, then you can also make a binding using puffs. The pages are connected by creating rings through holes in the paper. Usually three puffs are enough, which are located symmetrically from each other.

18. Pull tab

Very often, the tab on the slider in the zipper closure breaks or pops out of the loop. At the same time, it is impossible to put it back, since the gap of the fastener becomes too large, and physical impact on it can destroy this part. Therefore, it is better to insert a plastic puff into the slider, creating a ring. It is wider, stronger and does not make sounds when it hits the slider itself.

19. DIY spinner widget

For manufacturing, we need three bearings and three plastic ties. The bearings line up like three circles. They are fixed to each other, combining with a plastic screed. You need to tighten the loop very firmly. Further, in the places where the bearings are joined, we make clamps with clamps. So we not only produce a kind of separation, but also create a fixation of the bearings in a different plane. After trimming the tips, the spinner is ready.

20. Soap bubbles

If you have lost your bubble ring, you can make it yourself. To do this, a loop with a large residual tip is made from a plastic puff. We use it as a handle, and the ring is suitable for forming a bubble.

21. Plastic laces

This product makes it easy to put on shoes without wasting time unbuttoning or tying. For its implementation, it is necessary to connect the opposite holes for the laces with a plastic tie. The level of the clip is adjusted on the leg to immediately measure a comfortable position. The excess is cut off.

22. Luggage protection

All hiking bags and backpacks have two sliders on the clasp that move towards each other. When they are together, it is impossible to open luggage, but often during transportation, these elements are separated on their own. So the contents of the bag can be lost or stolen. To prevent this from happening, the tongues on these sliders are interconnected with a plastic tie.

23. Lens handle

If you put a plastic tie on the lens, fixing it on the adjusting ring, you can make a convenient handle. It allows you to make adjustments without having to take your eyes off the camera to find the control.

24. Convenient lid handle

So that the hot lid on the pan does not burn your hands, you need to secure it. To do this, we attach a plastic tie to its handle, pulling the tip high up. By lifting the lid for it, you will not only protect yourself from touching a hot surface, but will also be at a safe distance from the steam.