What can be done from an old chair? What can be done from old chairs Do-it-yourself shop from school chairs

Old chairs are a real storehouse for the realization of creative fantasies. All ideas are easily implemented at home, and the result will exceed expectations.

Several chairs, connected by boards, turn into a comfortable bench or trestle bed. For these purposes, it is necessary to select chairs of the same height, preferably in the same style. After the final assembly, the tree should be sanded, chipped and painted for greater safety.





You can play with the shapes and arrange the chairs not in a row, but in a circle. All furniture that will be used outdoors must be carefully treated with solutions that save wood from decay. This will allow you to extend the service life as much as possible.

How often does a chair serve as a hanger in the house? So why not use it for the same purposes, but ennobling the appearance.

Wall-mounted chairs turn into unusual shelves. In this case, the chair can be used as a whole, or you can leave only the back and seat.


It will be unusual to use a chair as a shoe holder. Instead of a soft seat, a basket is installed. You can do without it, but this increases the usable volume of the shoe rack, and inaccurately placed shoes will not end up on the floor. This solution will help save space, and at the same time the shoes will always be in order and at hand.

In the country, the chair can be used not only as a bench, but also as an art object. Instead of sitting or on the seat itself, you can put flower pots or cute little things. Such a chair should be treated with stain and varnish, after drying thoroughly - this will help save the tree from moisture for the longest possible time, because the flowers will have to be watered quite often.




The chair looks unusual as a storage for small things.



From a chair with a strong seat and back, but legs that have become unusable, you can make a garden swing. A synthetic or hemp rope is suitable for suspension, and in order for the swing to be removed, it is better to mount it on a carabiner for climbing equipment.


Chairs will also come in handy for lovers of our smaller brothers. They will make coasters for bowls and places to rest.


If you have enough experience, you can carve skids from wooden bars and install a chair on them. It turns out a rocking chair.


From the bottom of the chair you get a coffee table. Synthetic materials are best suited for weaving - they will not stretch over time as much as natural ones.

Old chairs will be a great source of inspiration for transforming the interior. Using imagination, you can make not only a new chair, but also things that are convenient and useful in the household.

An old one that has already served its purpose furniture the place is not in a landfill. Old chairs can be given a new and even very exciting life, if you add just a little imagination. From them you can make both cute new chairs and completely unexpected items, such as photo frames or a bedside table.

"So simple!" prepared some amazing ideas for you to refurbish old chairs. Watch and get inspired!

What to do with old chairs

  1. Old chairs can easily be turned into new ones

    Take the old seat as a basis. If the filler is still in good condition, you can leave it. If the chair has lost its softness, take the foam rubber and cut out a detail from it according to the shape of the seat.

    For upholstery, choose a thick fabric. Make a pattern, guided by the shape and size of the seat, and taking at least 10 centimeters of margin on the sides. The fabric can be fixed on the back with superglue or a furniture stapler.

  2. Here are some more ideas for reworking old chairs. They make great shelves.
  3. Or a dressing table with storage for accessories.

  4. An unusual clothes hanger can turn out from a chair.

  5. Or for towels in the bathroom.

  6. Turn old chairs into bedside tables.

  7. Another option for an unusual hanger.

  8. Original photo frames from the backs.
  9. If the back is mesh, then it will serve as a holder for jewelry.

  10. Dog feeders.

  11. From several chairs, placed in a row and fastened together, you get an original bench for your home or garden.

  12. You can even make something like a flower bed out of them.

  13. Or coasters for flowerpots.

  14. Children's swing.

Use these great ideas to create in your home

So do not rush to get rid of it. Using your imagination and our tips, you can make a new set out of this furniture. In this homemade craft, we will tell you how to make an original bench out of old chairs. This option is not only convenient, but also very interesting. You can put such a bench in the courtyard of the house or in the country. The original bench will become an unusual piece of furniture.

For the manufacture of this homemade product you will need the following materials.

materials
Old chairs (4 pcs);
Band saw;
Jigsaw;
Drill and drill bits for wood;
Dowels (wooden);
Paint and varnish remover;
Joiner's glue;
Putty knife;
Varnish on wood;
Dye;
Brush;
boards;
Meter;
Marker;

Step 1.

You must first take two chairs and carefully remove the horizontal racks that are in front of the seat.

Step 2

Now we take the remaining chairs. With the help of a meter and a marker, you need to make a mark where the cut line will go. This line should be slightly lower than the front seat post. Take the saw and carefully cut the legs along the marked line.

Step 3

At this stage, it is necessary to remove the old varnish and paint from the chairs. To do this, apply an even layer of a special tool for this work. Wait for the required time (it is indicated by the manufacturer of the product). After the required period has elapsed, carefully remove the old coating. To facilitate the work, you can use a spatula, as well as sandpaper (fine-grained)

Step 4

Now you need to drill holes for the dowels in the racks from the front and end sides. First you need to make a mark with a marker where these holes will be. Then take a drill and drill holes.


Step 5

Take the dowels and insert them into the resulting holes. Before that, be sure to grease the dowels with glue (carpentry)

Step 6

After the dowels are firmly glued, it is necessary to assemble the future base of the bench. This must be done as shown in the photo below. All components of the bench are fastened together with self-tapping screws. After that, the entire surface of the bench is sanded again.


Step 7

At this stage, we will make the seat of the bench. For this we need a board. The board should be adjusted to the size of the bench. It is necessary to mark the desired length, and cut off the rest. Back height is up to you.

Step 8

If you decide to make a seat from several boards, then they must be glued together with wood glue. After that, the entire structure should be clamped with clamps and wait until the entire structure is completely dry.

Step 9

Now you need to glue the seat to the base of the bench. Lubricate the base and the seat itself with wood glue. Put weights on the board, and also clamp it with clamps.

Step 10

Wait for complete drying. After that, take masking tape and paste over the surface of the seat with it. The remaining parts of the bench should be painted with special paint for wood.

Bench from broken chairs

On the site http://www.anoregoncottage.com I found a great way to save old broken chairs. From them you can make a completely incomparable country bench.

I think many people have such old chairs that are falling apart in the literal sense of the word. Of course, you can throw them away, or you can try to make something very interesting and convenient.

Step one: Find two identical chairs

  • Most suitable chairs that have a slight bend in the back. It is these backs that we need

Step Two: Creating the Seat

  • Assemble the frame as long as you see your bench and secure each end with two screws (as shown in the picture above). Use solid wood and long self-tapping screws, because our goal is to create a strong and durable structure.

Step Three: Creating the Bottom Shelf

  • Even after we have made the seat as secure as possible, the bench may still be too wobbly and unreliable. In order to solve this problem, we create an additional element of strength - the lower shelf

Step four: Putty and paint

  • We fill all the holes in the wood with a special putty, let it dry well, and then thoroughly sand all surfaces, paint with any suitable paint.

Step Five: Making the plywood seat

  • Cut off a piece of thick plywood of the required size
  • We cover the plywood with batting or foam rubber (its size should be slightly larger than that of the plywood sheet) and cover the seat with upholstery fabric. At this stage, a furniture stapler gun will be indispensable

Now we just have to decide whether to leave everything as it is or add a couple of pillows, because our bench is already ready!


___________________________________________________________________________

Suppose you absolutely need a large amount of money, and getting a loan from a bank is problematic due to the inability to provide the necessary documents. And what, a common thing, happens when there is no official place of work or the basic salary is paid "in an envelope." In this case, there is only one way out - to contact a company that can, and the entire package of documents will be executed not only promptly and competently, but also in the form that will guarantee the bank's consent to issue you a long-awaited loan.

1. Materials:
- two old wooden chairs;
- dye;
- water-based varnish;
- solvent for degreasing the surface;
- putty;
- sandpaper coarse and fine grit;
- self-tapping screws and nails;
- strong threads for the cover;
- furniture foam rubber 40 - 50 mm;
- furniture or any other fabric (you can use it).

2.Tools:
- rubber putty knife;
- brushes for applying varnish and paint;
- a hammer;
- clamps;
- screwdriver;
- a sharp knife for cutting foam rubber, scissors;
- grinder (you can do without it);
- sewing machine.

Step 1: find material

So, we need a couple of unnecessary rickety grandmother's chairs, which are probably languishing in your garage or pantry. In any case, at the flea market you can find and purchase these for a penny.

In addition to chairs, prepare boards for the frame of the bench and plywood, from which we will make the base for the seat, as well as a shelf under it. The latter can be very functional.

Step 2: preparing materials

Start by sorting out the chairs. We need to detach the back of the chair, on which the back rests. Such backs will serve us as the sidewalls of the future garden bench.


Further, from the remnants that remained after disassembling the chairs or suitable bars of the required section, we assemble the frame of the product. We went on principle and used the remnants of old chairs, because in general they seemed to us still pretty good.
The base will be rectangular, of arbitrary length, but choose the optimal dimensions - such that the finished product has the strength necessary for intensive use.


Screw a sheet of plywood to the base.

Step 3: bench assembly

We connect the received details, forming a prototype of the future bench for giving. For additional strength, we arrange a strapping of rails at the bottom along the perimeter - just the one on which the shelf we conceived from the remaining plywood will lie.








Step 4: Take Care of the Aesthetics

Now you have the most important work ahead of you, on which the final result of all the work done will depend.

Thoroughly clean the bench from dirt and dust. Sand all surfaces, and if necessary, sharp corners and edges, giving them a slightly rounded look - first with coarse sandpaper, then with fine-grained sandpaper.

Fill cracks, joints and irregularities with a rubber spatula. Again, sand everything well. The process takes quite a lot of time and requires patience, however, believe me, the end result is worth it. All elements will acquire a complete outline and aesthetic appearance.

Treat the surface with a solvent and proceed to painting. Apply the first coat, let it dry completely, then sand so that the next coat of paint penetrates the previous one. Paint all the details a second time, wait for it to dry and apply a coat of varnish.




With varnish it is better to do the same as with paint - lightly sand and varnish again. Thus, you get a coating that is very resistant to external influences. And since the bench is supposed to be located on the street under a canopy, this will come in handy.

Step 5: finishing touch

Sew a pillow for sitting. To do this, cut a piece of furniture foam rubber of the required size with a sharp knife. Attaching to it a piece of furniture fabric, which is usually used for upholstering sofas, determine the size of the pillow cover, not forgetting to add a little for seam allowances.

In fact, buying furniture fabric is not necessary. You can use any other durable material, and not necessarily new.

Stitch the cover and sew a zipper into it on the side. In the future, this will make it easier for you to care for the pillow. Place the foam in the cover and place it on the seat. A pair of bright pillows will complete the ensemble.

Fitting © 2022 Design and interior of apartments