How to make a garden swing with your own hands from wood - instructions and drawings. Do-it-yourself garden swing (45 photos): choosing a place on the site, material and type of construction How to make a wooden swing with your own hands drawings

There is no better decoration for a summer house or a private house than a swing - an excellent place for an afternoon rest for the whole family. Would you like to install them in your area? In our instructions you will find all the necessary information on how to make a do-it-yourself wooden swing for a summer residence and a garden, and not only about that.

The material is conditionally divided into three parts.

• In the first part of the article, we will consider the properties of wood and which breed is better to choose to make a garden swing with your own hands. Next, we will clarify what types of swings are made of wood, and we will also provide a table with the calculation of the strength of the supporting structures so that you can calculate the weight load.
• In the second part of the material, we will conduct several step-by-step master classes from which you will learn how to make the most popular and not too complicated designs of wooden swings for summer cottages. Among them: single with a wooden frame, from a bar and logs, in the form of a sofa and a bench, from a pallet, double outdoor swings and a swing-balancer for children, as well as the simplest version from the board.
• The third part of the article is aimed at arranging a garden swing. We will discuss their decoration, painting and the choice of covers. You will learn how to make a wooden swing seat with your own hands, how to fix it and repair it in case of cracking. In conclusion, we will consider the main swing roof options for summer cottages and gardens and how to care for such attractions.

Wood as a material: characteristics and properties

To build a good swing, first of all, you need to take care of the selection of quality materials. The most popular is wood - a cheap and practical raw material that will not cause difficulties in use even for beginners, not to mention experienced builders. Outdoor swings for summer cottages made of wood are popular in all types of sites - they organically fit into landscape design, are easy to operate. Let's try to figure out what are the pros and cons of using such material.

Advantages and disadvantages of wood

You do not need to have serious carpentry skills to work with wood - for this you only need a few supplies (we will talk about them a little later). Among the advantages of wood it should be noted:

• environmental friendliness - such material looks more organic on the site, the more flowers, bushes and trees you place on it;
• aesthetics of wooden buildings - with a competent approach to decorating, the result can exceed all expectations;
• low price.

However, while listing the advantages, it is impossible not to pay attention to some disadvantages. The most significant of these is the relative fragility of wood. Unlike a metal swing, a wooden swing will require much more careful care. Wood with difficulties endures such natural factors as:

• rain;
• snow;
• direct sunlight;
• fungus and mold;
• insects;
• sharp temperature changes;
• decay processes.

That is why it is important to cover the tree with special antiseptics or just varnish, stain.

What breed is better to choose for a swing

Consider the fact that some species of coniferous trees may be subject to rotting, which can be fought locally by covering the areas affected by the fungus with a special antiseptic (pinotex has proven itself well).

An excellent raw material for buildings of any type is oak, which has a significant drawback - the high price of raw materials. However, it is very durable, massive and quite easy to work with when decorating.

Another option would also be the construction of a linden swing - it is rarely used for large buildings, because it does not have a sufficient degree of protection from the cold, however, this factor does not play a significant role for a swing. The material itself looks attractive, while possessing the necessary level of strength.

Strength calculation for wooden swing beams

The calculation of the strength of the swing is based on the crossbar on which the swing will be hung. The thickness / height / length of the crossbar is taken into account. In the table below, you can see what approximate loads the support will withstand with these quantitative values.

Types of garden swings made of wood

Swings made of wood are distinguished by a variety of shapes and methods of construction. We propose to draw your attention to the proposed options for country garden swings made of wood, each of them has a number of advantages and disadvantages that must be considered before starting construction.

By installation method

According to the installation method, the swing can be:

• stationary
• portable
• suspended

Summer swings for summer cottages can be stationary - this means that when installing them, you assume that they will stand exclusively in one place (a columnar foundation is laid). Such a building is reliable and strong, it will last a long time. The minus is obvious: it will be problematic to move the swing from the place.

Such a swing is more mobile than the previous version. They are mounted on a pre-prepared support, and, basically, they differ both in a high degree of transportation and in the possibility of folding, for example, for transportation to another place of rest (not all wooden structures have this property).

Aesthetic appeal and ease of operation make this type of swing especially desirable for installation on the site. A significant disadvantage may be the insufficient strength of the proposed support - in other words, on your site you must have a tree of the required size. Most often, hanging swings with a wooden seat are installed for children - tree branches can support their weight without much difficulty.

By destination

A swing for the street to the country house can also be divided according to its intended purpose. Not every design is suitable for operation at the same time even by two people. This classification implies a division into swings:

• family;
• for children;
• for adults.

	Family swing. They can easily accommodate up to 4 people. They are based on a large bench, which helps to easily place both children and adults on a swing. Powerful fasteners must be installed on the structure and they must be made of durable wood.
	Wooden children's swing. This is a small design designed for light weight - most often they are designed for one or two places, and you can swing on them quite high. These are installed more with an entertaining than a relaxing function. An important component is the safety elements - a comfortable backrest and handrails that will help fix the position of the child.
	Outdoor swing for adults. They are considered one of the indispensable attributes of a site equipped for recreation. Such swings cannot swing widely, but in most cases they have canopies, which makes it possible to enjoy your vacation even in rain, wind or the scorching sun. Sometimes insect nets are attached to such swings - they become like tents, and can compete in comfort even with gazebos.

Properties of different types of wood

A few words should also be said about the types of wood, because not every wood is suitable for creating a swing, because such a building must not only resist the challenges of nature, but also withstand certain loads every day. The tensile strengths of different types of wood are shown in the table below.

Wood is also chosen because of the texture - the pattern on the cut, which is obtained when the fibers or growth rings intersect. The texture is closely dependent on the type of wood: in conifers it is simpler, in deciduous it is very diverse. Here are the textures of some rocks:

An important physical factor is the gloss of wood. The greatest brilliance is distinguished by structures made of beech, oak and mahogany (otherwise - mahogany).

Do-it-yourself single swing made of wood

If you are interested in quality construction, then you should pay attention to the instructions and advice from experts. How to make a garden swing with your own hands from wood, we will now describe in detail.

You should start with the fact that a single swing for a garden made of wood is not designed for a large seated weight (up to 120 kg). Most often they are installed for young children. If you decide to install a children's swing, then, among other things, you need to consider a protection system for the baby in order to avoid falls and injuries.

Drawing and project

Do-it-yourself drawings of a garden swing made of wood will be necessary for a more detailed study of the appearance of the structure. The diagram should show:

• overall length, width, height;
• height of vertical columns;
• vertical beam length;
• the length of the mounting bars supporting the vertical posts;
• the distance between the seat and vertical beams on both sides;
• distance from the seat to the ground.

We have prepared for you a project and a drawing of a wooden swing, check it out below.

It will be important to indicate the thickness of the board and the area on which the swing will be located. It is best to create a drawing from several angles - the better you approach planning, the less likely there are errors in the calculations in the future.

Step-by-step instruction

You need to start building a swing for a garden with your own hands by choosing a place. Preferably the terrain should be free of holes and mounds. Otherwise, the swing will be uneven.

	We construct side vertical pillars. To do this, take two bars 3100 mm. The length of the bars (side "a") can be calculated knowing the height of the swing (side "b") - 3000 mm and the angle at which the bars are connected at the top point - 30 degrees (β). The formula looks like this: Base length - 1560 mm.
	Now, between the vertical posts, we push a horizontal beam (a chain with a seat will be attached to it in the future) with a length of 3000 mm. After that, we drill a through hole from the upper edge of the support post and screw in a screw with a nut, strengthening the structure.
	We tilt the structure on its side and drill two through holes in a horizontal beam at a distance of 750 mm from the edges (for the construction of a suspension). We screw the bolts with a washer into them, we wind the eye nuts onto the ends. Now we raise the support to the legs.
	Wooden spacer bars should be installed between the standing bars. We will fix with the help of metal corners and 5 mm screws. We fix the upper spacer with the help of corners.
	In this project, we mount the swing without installing a concrete base, so we cover the bars with bitumen to extend their service life. From above we cover the tree with a stain to give it the desired color.
	Let's take a seat. For the back we make bars with dimensions of 30x13x457 mm. For the seat frame, use bars with dimensions of 51x152 mm. You will need two such frames (seat and back). Attach the slats to the frames and tighten the seat and back with the help of corners. For convenience, you can nail the armrests to the seat. We fasten eye bolts to the sides (2 pieces on each side - one to the seat, one to the back).
	Let's put up a swing. We attach carabiners to the eye nuts and then attach two chains. The length of the chain that is attached to the seat is 1650 mm, and the one that is attached to the back is 1200 mm. Calculating the distance is quite simple, it is only important to remember that a sitting person should reach the ground with his feet.
	Since sitting on a wooden seat is not very comfortable, we advise you to sew special covers that can be removed and washed at any time.

In order for both racks to have the same angle of inclination, we recommend that you first lay out the structure on the ground and then outline the necessary boundaries

Do-it-yourself swing from timber and logs

Timber is a material in which reliability is successfully combined with an attractive appearance. From it you can easily make a swing for both children and adults. Due to the fact that this material is quite massive, do-it-yourself wooden swings can turn out to be as beautiful as purchased ones and as strong as iron ones.

Advantages and disadvantages

Let's decide on the main pros and cons of a log swing. Let's start with the positives:

• the swing is stable;
• such structures are difficult to damage not only to people, but also to adverse weather conditions, for example, strong winds;
• attractive appearance. As a rule, such swings look quite impressive, which makes them a real decoration of your garden plot.

Disadvantages, alas, are also present: a tree, as you know, is very sensitive to all kinds of insects, and protecting logs from pests is somewhat more difficult than ordinary boards. Wood, among other things, tends to rot over time.

Antique wood swing

If you want to make your yard a work of art, we recommend that you pay attention to the stylization of antique wood swings. For this you need:

	2. Make notches and notches on all swing beams.
	3. Cover with the first layer of stain, let dry, then cover with one more layer and leave until completely dry.

Let's make a garden swing with our own hands step by step

We suggest you build a wooden swing in the form of a bench, which are shown below.

First, prepare a flat platform for the swing. Use a building yardstick and pegs to mark the boundaries of your structure. Study the drawing of a swing made of timber with dimensions that we have compiled before proceeding with installation.

It is necessary to prepare material for installation. You will need 4 beams 2070 mm long and 100 mm in diameter. They will be the support of the structure and are connected at an angle of 30 degrees in the form of an isosceles triangle (letter A). Base length - 1035 mm. The length of the partition at the base is 1035 mm. The length of the A-shaped partition is 455 mm (20 mm protrusion on each side). The width of the structure is 4500 mm, the width of the bench is 1500 mm. The diameter of all bars is 100 mm (it is not clearly visible in the photo, but we recommend using this particular size).

	We make vertical racks for a swing. We take two beams 2070 mm long and place them on the ground in the form of an isosceles triangle. After that, using a compass and a pencil, we mark out a single circle on two bars with a diameter of 100 mm (each bar should have a semicircle with a radius of 50 mm). Using a grinder, cut out the marked area and sand it. We check how the horizontal beam fits into the recesses, if it protrudes, we file a little and clean the vertical racks. We do the same with the other side.
	Now we put the racks vertically and fix the horizontal beam with long bolts with washers and nuts. Fasten on the other side in the same way.
	We make horizontal partitions. On vertical racks we make recesses with a chisel and a hammer. It should turn out like in the picture.
	The first partition is A-shaped. To begin with, it is necessary to make a recess in it, since a diagonal support will enter it. We make a recess in the vertical pillars (for the upper and lower partitions). Next, we adjust the diagonal bar to fit the hole in the A-shaped bar. At the end, we cut it off at the end at an angle of 45 degrees and fasten it to the bolt.
	The top brace should be 1110 mm from the base, the bottom brace at a height of 50 mm. . We put the structure on its feet. At a distance of 1500 mm from the ends, we drill a hole and thread two bolts. We twist everything with eye nuts.

Swing in the form of a sofa

This type of swing really impresses most summer residents with its attractive appearance. We will not consider how to make a swing sofa for a summer residence with our own hands, step by step, because. have already described how to make wooden supports, and this is 75% of the structure. Using the drawings provided by us, you can make stand-ups for such a swing. However, we will dwell on sofas for such swings in more detail.

Tips for building a sofa swing with your own hands

Such swings need to be varnished from time to time - this will protect them from both insects and cracks.

Pallet swing

Swings in the yard from pallets for summer cottages are popular with those who know a lot about savings and design ideas - such a design will be inexpensive and will attract attention from neighbors. How to make a swing from pallets with your own hands? Let's deal with this issue.

Which pallets to choose for a swing

Garden swings can be made from virtually any pallet. There are three types of pallets:

• European (1200x800);
• Finnish (1200x1000);
• American (1200x1200).

The latter are the strongest of the presented, but at the same time the heaviest. Finnish swings are best suited for swings - they are equally strong and light. It is advisable to use new pallets, but if you don’t have any at hand, you can use used ones, having repaired them in advance.

1. Rigidity. Pallets must retain their shape during deflection and not break, otherwise the swing is unlikely to support the weight of even an adult.
2. Price. You do not need to spend a lot of money on the purchase of pallets, just as you do not need to save too much on their purchase. Here you should stick to the golden mean.

Do-it-yourself step-by-step instructions for swings from pallets

A simple but very comfortable design is a pallet swing sofa. Prepare pallets for work. Remove excess debris and excess nails from them (if pallets have been used before).

	We are preparing a general drawing-project of a swing with a seat and a frame. In this case, the width is 3000 mm, the height is 3000 mm, 4 crossbars are used as a-shaped supports, set on two sides in the form of isosceles triangles at an angle of 30 degrees at the upper attachment point. (the shop is not the same as in the drawing, but the same size. The correct shop is in paragraph 2).
	Study the detailed drawing of the pallet swing itself, provided by our editors.
	We cut the pallets according to the drawing with an electric jigsaw.
	We knock down two pallets with nails between each other, as in the photo. If two pallets are taken for the seat, then take care of the load-bearing logs nailed from below (they will take on the weight of people).
	Make armrests. We use 4 bars of 80 mm in height and 35 mm in diameter. Nail them to the seat as in the photo. On top of each side we nail two boards, pre-sanded. We wind the eyebolts, on which the chains will subsequently be attached.
	We make vertical pillars. The creation scheme is the same as in the previous cases - we cut off the edges of two inclined beams, and put a horizontal beam in the center. Then fix with screws. We strengthen the edges of the horizontal beam with metal corners.

For decoration, you can put a few pillows on the seat or sew a separate cover so that you can comfortably spend time on the swing.

Double outdoor swing

Double outdoor swing on wooden posts - an option for a family where children do not want to ride in turns at all. They are just as easy to make as singles, you just need a little more time.

Double street swings also require additional calculations - in the drawing for the project, do not forget to consider the location of the seats so that they do not touch each other when swinging.

If the swing is a solid bench, then keep in mind that they will be quite heavy, so you should calculate the load on the mount in advance. We advise you to study the table provided in the section “strength calculation for wooden swing beams”. Structures of this kind have their own characteristics:

1. Wider top bar. If the seats are not connected to each other, we recommend making a length of 4500 mm, if the seats are connected - 3000-3500 mm.
2. Reinforced base (columnar foundation).

Materials and tools

We propose to make a double garden swing for a summer residence original - for two children with separate seats. Thus, children will get maximum pleasure while relaxing together.

Tools:

• shovel;
• building meter and pegs;
• manual drill;
• bucket;
• capacity for mixing concrete;
• saw or grinder;
• hammer (normal and rubber);
• drill with drills;
• wrench;
• grinder with a disk for metal;
• welding machine;
• screwdriver

Materials:

• bars 100x100x3000 - 4 pcs;
• timber 70x200x4000 - 1 pc;
• bolts with eye nuts;
• carabiners for chains;
• metal chain 3000 mm long;
• plywood sheet 3 mm;
• paint (blue, red);
• corrugated pipe 10 mm and 50 mm thick.

Step-by-step instructions for a double street swing with your own hands

Building a swing for a garden with your own hands begins with choosing a suitable place on your site. Make sure that the area is open and permanent buildings are at least 5-7 meters from the site.

	1. We are preparing a project. After that, on the site we mark the boundaries of the swing with pegs. To make the structure more attractive, you can paint it in bright colors, but more on that later.
	2. For the upper part of the swing frame, we use a professional pipe with a diameter of 50 mm. It is necessary to weld two parts 600 mm long at an angle of 45 degrees to the crossbar (if it is from a professional pipe) to get an isosceles triangle. If the crossbar is made of timber, then we use nuts and bolts, pre-drilling holes of the desired diameter. At a height of 250 mm from the base of the tubes, weld a spacer so that an A-shaped structure is obtained as in the photo. If you use a crossbar made of timber, then it will be able to withstand a weight load of about 250 kg.
	3. We drill 4 holes for bolts with eye nuts.
	4. It is necessary to prepare vertical supports from a bar for a double garden swing. We attach them to the triangles from the professional pipe. We drill 5 holes in each triangle and tighten the screws. We do the same with the remaining legs. At the end, we cover the lower part of the bars with an antiseptic for a longer service life.
	5. We take plywood and a jigsaw. Using a pencil, draw an equilateral triangle with sides 600x600x500 mm. Cut out the triangle and round its corners. After that, using self-tapping screws, we attach to the vertical bars, closing them.
	6. Now you need to make a columnar foundation. Using a hand drill, we make holes with a depth of 400 mm. At the bottom we fall asleep a layer of sand (100 mm). Next, install the legs of the swing and pour the concrete solution. We are waiting for 2-3 days until it hardens.
	7. Installation of seats. To do this, take several steel rods with a diameter of 10 mm and bend them as shown in the figure. Then, by welding, we combine them into a single structure. At the top, along each of the edges, we weld fasteners for chains. Repeat the process for the second seat.
	8. Finally, you need to connect the seats to the upper horizontal beam using chains. We measure 4 segments of 1800 mm. Next, we attach with the help of carabiners to the eye nuts. It remains to decorate the swing. We take blue and red paint and paint the seats, as well as the racks. Let dry for a day and enjoy.

Wood swing balancer

You already know how to build a swing for a dacha with your own hands, but if you don’t want to deal with suspended structures, then we can offer a balancer-type design - an option for sharing leisure time with a child or for general children's entertainment.

Features of balancers

Children's homemade wooden swings of this kind are good because they are difficult to break or damage. At the same time, it should be borne in mind that such entertainment is only suitable if you have two children or you are constantly focused on playing with a child, since it makes no sense to ride a balance beam on your own.

In addition, balancers are several times more traumatic than conventional designs, and therefore it is not necessary to neglect safety rules when using them. For balancers in safety frames, handrails and backrests are made.

Step-by-step instruction

Do-it-yourself swings on the street are done as follows:

	1. Draw a drawing of your future swing-balancer. Specify the dimensions of all structural elements, as well as angles and radii.
	2. Take a board 1500 mm long and sand it with sandpaper. Next, you should cut out small recesses 20 mm thick and 100 mm wide. The recesses should be located 280 mm from the ends of the board.
	3. We cut out the details for the recesses with the dimensions as in the drawing.
	4. Now you need a board 20 mm thick, measure as shown in the figure. Next, using a saw, cut off unnecessary parts of the board. At the end, take a brace and drill a hole. We sand it. After that, using self-tapping screws, we fix the parts to the recesses.
	5. We make vertical posts for the base of the swing. We take a board 650-680 mm long, 50 mm high and 60 mm wide. We sharpen the end of the board in the form of a stake with the help of an ax, at the other end with the help of a brace we drill a hole with a diameter of 25 mm.
	6. We take a device for attaching the board to the support posts with dimensions of 40x60 mm and a length of 160 mm. We sand and rub the ends in such a way that we get a pointed rectangle. Then, using a saw, we saw off a small piece from the end 3-5 mm long. We do the same on the other side. Next, using a long 25 mm drill, we drill through
	7. Now you need a steel bar with a diameter of 24 mm and a length of 180 mm. Using a die, we make threads at both ends by hand. Thread length - 5-6 mm. We drive it into a drilled 25 mm hole in the bar so that it fits very tightly;
	8. We assemble the structure. We connect a long board and a bar together with bolts (drill a hole through and connect). We drive the rod into vertical posts and tighten the nuts. For more strength, you can weld them on.

The assembly of the wooden garden swing is completed - now you and your children can enjoy the new toy in the yard!

Board swing - the easiest option

A few words about how to make a swing from boards in the country with your own hands. More precisely from a single board. The design is one of the most popular among summer residents and country builders.

Assembling a wooden garden swing usually requires some amount of time and materials. Here you only need one board and a rope. We will fasten this structure to a tree (an oak or any other massive tree will do).

Unusual swing options

If you want to make something special for your children, we recommend that you pay attention to the unusual designs of homemade garden swings for summer cottages. Their main difference is in the material that is used either for the seat or for attaching the seat to the frame / wood.

You can create a swing with your own hands in a tire garden, for example.

An excellent option for a wicker round swing is a tire suspended from several fasteners with a rope or chain. In order to make such a design, you will need to pierce the tire through and pass a rope or chain through the resulting holes, securing it.

Another unusual swing option is floating benches. These are the most common benches suspended from a tree on ropes or chains. We recommend making such a garden swing from rattan or vines and then hanging it by carabiners from the ceiling of your veranda or on a tree.

Another option is to make a swing in the form of some object, such as a car or an airplane. It will take more time for such a design, but in the end your children will constantly play on them. To do this, you will need to spend a lot of time on the manufacture of individual parts, as well as connecting them together. However, the result will justify all your efforts.

Decoration and arrangement

Wooden swing for relaxation can be decorated in various ways. These can be both decorative pillows thrown on the seats, and intricate carvings along the edges of the bars. Lamps next to the swings, including floor lamps, look especially impressive. There are options to experiment with the rope - perhaps it can be braided with something bright.

Finishing Features

A beautiful wooden swing cannot be imagined without decoration and decoration. At the same time, even a non-professional can try himself as a carver - for this you need to have an electric jigsaw and a little imagination. Remember that hardwoods are somewhat easier to work with - although they are more reluctant to finish, the end result will look much better.

You can paint the swing with the following materials:

• wood/metal paint;
• stain;
• antiseptic.

Painting

It is best to paint a garden swing immediately after filling. Paint should be chosen specifically for wood - it will not only lie better, but also protect the material from pests. At the same time, the paint, unfortunately, is not so durable - the swing will have to be repainted every few years.

Paint is considered a good protection against pests and insects, and the look of a painted swing is aesthetically pleasing.

Choice of covers, mattresses and pillows

Swing covers, most often, choose bright colors - this is not a mistake, but it should be borne in mind that the material may fade in the air. It is best to choose fabric for garden swings from those that are considered waterproof (like a tarpaulin or raincoat fabric). There is no chance that you will always take the pillows into the house on time, and the rain will not be so terrible for canvas, and it is much easier to dry them later.

Pay attention to the fact that people will come into contact with the fabric, and not only natural factors - in order to sit on a swing not only comfortable, but also pleasant, you need to make sure that natural raw materials are present in the fabric - for example , cotton or viscose.

The dimensions of the cover should be 3-4 mm larger than the parameters of the seat so that you can adjust the cover. To attach the cover to the bottom of the wooden seat, we recommend using a construction stapler.

swing seat

If you don’t want to buy seats in the store, we suggest considering the option of how to make a swing seat with your own hands using improvised means. Pay attention to the fact that wooden seats will be more advantageous than metal ones - they are safer and more comfortable. On the other hand, their strength will be constantly tested, and it would be good to take this fact into account when designing. For comfortable riding, it is recommended to sheathe the seats with a soft cloth - this also helps to avoid unnecessary injuries.

Types of seats for swings

According to the design of the seat for the swing, they differ:

• with a back - for both children and adults;
• without a back. Relevant for teenagers - for kids it can be too dangerous;
• with armrests and without them;

By size:

• for garden swings - in the form of a bench or sofa;
• single seat for an adult or teenager - no more than 600 mm in width;
• for children's swings - single with a width of not more than 500 mm, or even less.

According to the material of manufacture:

• plastic;
• tarpaulin;
• tree.

How to make a DIY swing seat

Do-it-yourself swing seat is extremely simple. You can knock it down from the boards:

You will need:

	Prepare the seat frame. To do this, sand all the bars and then knock them down with nails (or screw in screws).
	Nail the horizontal bars. The distance between each bar is 3 mm.
	Attach the bars to the seat, each of which is attached to the crossbar for the armrests.
	We recommend fixing the back at an angle of 110 degrees.

The seat is ready. After that, it is best to cover it with a special septic tank or stain / varnish.

If the seat on the swing that you made turned out to be unreliable (or you see that it will soon become so), then it is worth repairing it.

• The most important thing is to remove the fabric and patch up the holes, after washing it. You can use raincoat fabric or other strong material to patch holes (if the seat on the garden swing is torn). Often, funny applications are attached to the place of the holes - they are sold in the store.
• Repair of a seat on a garden swing can be completely cardinal: you can remove the seat completely and wrap the frame with a nylon cord. You will ride on such a swing for a very long time - the cord is very strong, and in which case, it will not take as long to make a constriction as to do patching.

How to fix the swing to the horizontal bar?

We discussed how to assemble a country garden swing - it's time to clarify how to fix them. The dimensions of the drill, bolts and nuts, depending on the design of the swing.

If you are attaching to a horizontal bar from above:

1. We drill a hole through with a drill;
2. We insert a bolt with a washer;
3. We wind the eye-nut from the underside of the crossbar.

If you attach to the seat:

1. We drill a hole for fastening;
2. We pass a bolt with a washer;
3. We screw in the eye nut.

To prevent the nut from being pressed through, it is advisable to put a washer under its cap.

In the store you can find special mounts of various shapes and devices. There is only one drawback to such a mount - the swing begins to seriously creak during operation if the mount is not lubricated in time.

Outdoor swing roof

A do-it-yourself roof for a swing in the garden is done almost as quickly as the swing itself. When creating a roof, it is best to focus on the shape of the building and its purpose. Consider several options for materials for a wooden swing with a roof for the garden.

How to care for a swing

During construction (as well as during subsequent operation), it should be borne in mind that a tree for a swing does not differ in the same strength and reliability as, for example, metal. Therefore, you need to pay attention not only to how you will bring down the swing, but also to how to properly care for them.

• Once every few years (usually a period of 3-4 years is taken as the basis), it is desirable to treat the surface with a special anti-rotting agent.
• With some periodicity, we advise you to repaint the structure, refresh the colors.
• Do not forget about metal parts (for example, handrails on swing-balancers) - they will also need to be treated with a rust and darkening agent.
• Fabric covers should be washed periodically - once every one and a half to two months.

What and at what price to buy a wooden garden swing for a summer residence?

At the end of our material, we have prepared a small selection so that you have an idea how much a garden swing costs and which one is better to buy. Let's start with the most expensive and elite.

Name	Photo	Price	Description
		308 100 rub	Construction dimensions: 290x190x210 cm. Permissible load 300 kg. Made of larch (laminated timber). The frame is varnished, and all materials are environmentally friendly. VIP option for elite sites.
		RUB 172,900	The dimensions of this garden swing are 264x180x207 cm. It can withstand a maximum load of 300 kg. Made of coniferous wood, all materials are environmentally friendly.
Garden swing “Aristocrat”		RUB 106,799	Dimensions 224x167x200 cm. Withstands 200 kg. Ecologically clean luxury furniture, made of solid spruce. Additionally covered with antiseptics that protect against decay.
		RUB 95,401	It has dimensions: 250x155x245 cm. It can withstand a maximum load of 200 kg. Made of natural coniferous wood, covered with acrylic lacquer.
Outdoor swing Kampfer Talking		47 039 RUB	Swing dimensions: 240x260x240 cm. The maximum allowable load is 150 kg. The posts are made from cedar. The kit comes with an awning.
Swing Gloria		30 676 rubles	Dimensions: 221x265.5x212.5 cm. Maximum load capacity 200 kg. Also treated with special impregnation and moisture.
Garden swing Avola		23 690 rubles	Dimensions: 208x165x204 cm. Made of solid timber (pine). Oxford fabric awning. The swing is treated with compositions against moisture and drying out.

Do-it-yourself garden swings are easy to make if you know how to handle tools. All work can be completed in one or two days.

What to make a swing

You can design them from almost everything that comes to hand:

• Wood: beams, trimmings, logs, planks from boxes, boards, slats, benches.
• Metal: pipes, profiles, rods, wires, chains, rings, hooks, sheets.
• Plastic: boxes, chairs, hoops, pipes.
• Shaped parts from sewerage: tees, elbows.
• Bearings.
• Ropes, ropes.
• Tires.
• Thick fabric, tarpaulin.
• Cases and seats of old cars and motorcycles.

As you can see, we can continue indefinitely, but we will limit ourselves to this list for now.

Beginning of work

To properly make a garden swing with your own hands, you first need to prepare a project and drawings of the future design, based on the material you have available. If you are planning to make a metal garden swing, but there are not enough details, you can ask your neighbors, friends or make them from another material, such as wood.

Prepare a pencil (pen), eraser, ruler, paper, protractor. They will be needed not only for drawing, but also for the subsequent marking of parts. If you can’t start drawing right away (don’t know where to start), then just sketch out the swing drawing, “as you see it”. It will be much easier to draw from the drawing.

Don't feel like you're wasting your time drawing all the details. At the construction stage, you will have to refer to the drawing more than once.

Installation of supports and crossbars

The installation of supports can be carried out in different ways:

1. Install two vertical bars or pipes.
2. Dig in two large letters L.
3. Put two A-shaped structures.
4. Mount supports like the letter X.

The photo shows different types of installation. As you can see, the crossbars are also fixed in different ways. In addition to such attachment methods, for example, in the first picture, you can drill the racks at the top and install a metal pipe or a thick rod. It is used as an axle from a cart or trailer.

If you made racks from wide boards, you can drill them out and install bearings in the holes. Close them on both sides with perforated sheets of metal, which are nailed to the board. A rod must be inserted or pressed into the holes.

A more advanced method of fixing the horizontal involves a special design mounted on poles, made by welding from three pieces of metal pipes.

There are several options for mounting supports:

1. Set on the ground or dig into it. The option is bad. Due to dampness, the end of the beam will rot, and everything will collapse to the ground.
2. Wrap the butt of the support with polyethylene or paint it.
3. Concrete the support.
4. Install on a special podium or on a terrace.

The second and third options are more acceptable. It is necessary to wrap the end so that the film comes out 20-50 cm. This will protect the bottom of the protruding part of the column from dampness in winter (in snowdrifts). The same must be done when pouring the column with cement. The formwork should protrude from the ground.

Suspension and mount designs

In order for children and especially adults (due to the greater weight) not to fall, it is necessary to hang the swing securely. To do this, you need to find:

• strong enough ropes - you can use slings from parachutes (withstand 150 kg each) or ropes of climbers;
• chains - even those that tie dogs are suitable, but preferably thicker;
• thick wire or long metal rods with a caliber of at least 10 mm.

Fasteners can be completely different:

• From rope. Throw a rope over the crossbar and fix it at the bottom of the seat. Or pull through the saddle and tie a knot at the top.
• Hook or ring.

The second method has several options:

The first two are designed to wrap around shaped crossbars: rectangular and round. They are a kind of clamps with hooks.

The last two are designed to strengthen the hooks or rings in the through hole of the crossbar.

Seat manufacturing

Classic boards and half-logs on a swing have long become boring to everyone.

We will talk about several non-traditional methods for making swing seats. They are easy to make and don't take much time.

Option 1.

The easiest way is to use old chairs or benches made of any material that have broken legs. It's beautiful and practical. There are several ways to mount them on a swing:

1. We drill 4 holes in the seat of the chair (blue), pass the ropes through them and tie a rod or a thin metal tube from below. He won't let the rope slip back.
2. We fasten or nail the boards to the seat (yellow), drill them. We thread the ropes into the holes and tie large knots. For safety, such knots can be omitted in order to prevent them from blooming and passing through a hole. It is better to simply tie the board with the end of the rope.
3. Instead of holes in the seat, we cut out the grooves and wrap the chair (pink) with a rope. But the child can jump, the rope will be released and slip to the side. So that the rope does not jump out, we fill the boards from below.

Option 2.

You can make a seat from canvas or fabric, but it is not very comfortable, as it wraps around the person sitting on both sides, squeezing him. For convenience, you can install a spacer on a rope or chain above the seat and then the degree of girth will decrease.

Option 3.

Make a pseudo-seat from a tire. Hang it on ropes. In the sector facing the earth, stuff soft unnecessary things.

For convenience, take large tires, for example, from the rear wheels of a tractor.

Option 4.

Hoop as a seat. A hula hoop is taken and wrapped with ropes in diameter:

If this is difficult for you, you can put a ring in the center of the hoop and thread the ropes through it. First set the small circle in the center and fasten one cord so that its two ends are on the same side. Then reinforce the twine on the opposite side. And so on.

Option 5.

Use for this an old durable basin, tub or even a trough.

But just sitting on wood, plastic or metal is not very pleasant. For greater comfort, you can put pillows for garden swings on the seat, made of foam rubber and covered with dense fabric or leather. If, during assembly, it is prudent to make soft seats, then no pillows will be needed.

How to make a wooden garden swing

There are two ways:

Option 1.

They represent a seat made of any suitable material, suspended by one or two ropes from a bough.

The photo shows that the ropes can be tied in different ways, the main thing is that they do not slip off:

• on the left side, two ropes are thrown over a branch and fixed at the bottom with four knots;
• in the upper right picture, one rope is suspended from a hook;
• on the bottom - two ropes hang on hooks.

Option 2.

Run the swing entirely from wooden parts. That is, make supports and a crossbar from bars or logs, and a seat from boards, slats or wooden benches and install as described above.

If you fill in the foundation, fix a downed special shield on it, a podium and install a swing - it will be even better. After all, the supports and the shield do not touch the ground. Moreover, additional bars are installed between the shield and the foundation, which provide airing of the shield.

The drawings of the two structures are shown below.

As you can see, a wooden garden swing is not so difficult to make.

How to make a metal garden swing

Usually, a welded structure is made in the form of the letter P, on which the seat is suspended using hooks with clamps or through.

It is made of pipes of at least 5 cm caliber. You can simply dig or concrete two risers, insert the axle from a wide wheelbarrow or cart into the pre-drilled holes and lock it with fitted wheels.

You can weld a wire with a swing onto the axle, because the axle will rotate freely. For greater effect, you can install it on bearings, as mentioned above.

To perform the second option, you need to weld something resembling the roof of a house. Everything is clear from the drawing.

Structures of this type can also be made from a profile. We will immediately warn you - not from drywall. That profile is very thin and may not support a swinging person. It is designed for stationary load.

The industry produces rectangular pipes, T-beams, I-beams. Here you can make a swing out of them. Their appearance is no different from the other structures described above.

The following options are more difficult to perform, because for their implementation it is necessary or to weld several pieces together.

For pipe bending, a proven method can be applied:

• a mandrel is being prepared;
• the pipe is tightly clogged with sand and corks (wooden);
• then carefully bend the future support along the mandrel.

These structures are distinguished by the fact that they can be easily carried or moved. True, this may require 2-4 people.

How to make a 3-seater swing

Usually, rocking designs involve a single, less often a double option. But now a 3-seater garden swing has come into fashion.

The installation of racks and suspension is identical to those described above, but the width is much larger.

To perform it, you need to make a special elongated seat that would accommodate three people, and install racks at a distance of at least 2 m.

The seat is available in two versions:

1. Classic - everyone sits facing in the same direction.
2. Modern - the average rider, looking in the opposite direction.

Let's consider the first option. He is easy to perform. For its manufacture, you can even hang a bench that can be seen in parks. But because of its large weight, this is not worth doing. It is better to make a special seat yourself.

It can be made of aluminum pipes or wood. Below is the procedure for assembling the 3-seater seat. Its length is 1500 mm or more, the width and height of the backrest is 500-600 mm.

DIY wooden swing (video)

Reading time ≈ 10 minutes

It's nice to sit on a bench after a long day at work. It is also much more pleasant to relax on a garden swing, which will give light swaying and soothing coolness. Buy, unfortunately, such a design is not always possible. After all, the cost of such a swing is high, often sky-high. Therefore, let's talk about how to build gardens in order to enjoy a pleasant outdoor recreation.

Beautiful garden swing in the country

Undeniable advantages of a garden swing. Varieties

At the dacha or in the yard of a country house, garden swings are an indispensable attribute of landscape design. In addition to a great place to relax, they perform many functions:

1. resting on them, you can easily gather your strength;
2. calm the nervous system;
3. beautiful decoration helps to transform the entire yard;
4. a comfortable place to work at a laptop or to read books;
5. you can nap on them during the day (especially for children);
6. suitable for a pleasant tea party and conversations with a glass of wine;
7. children are helped to train and develop the vestibular apparatus.

As you can see, the benefits are really huge. Therefore, it is logical that their popularity is so high among the population. The design, in fact, is not very complicated, so even a beginner in the construction business will be able to build such a swing at home.

Another advantage of own construction is the full compliance with your desires. You can decorate or decorate it yourself, choose a special shape and size. The main thing is to follow the instructions during construction, then everything will definitely work out.

Before you start making a garden swing, you need to consider what they are. For example, for the purpose:

• for children;
• for adults;
• for the whole family.

Depending on the location there are:

• stationary swing;
• mobile swing. Convenient in that you do not need to be tied to a specific place. You can easily and quickly move it to another site.

If we talk about the main materials used, then the swing is:

• from wood;
• from metal.

The design can also be very different.

Suspended.

This option is simple. All that is needed to create such a swing is a crossbar, a high strength rope and a seat (it is better to choose with a back).

Hanging garden swing

Frame.

Often used for children. They are strong and stable and easily moved. So at any time you can move the swing to the shade or another place you like.

Frame garden swing

Crafting on wood requires crafting a seat. Everything else is easy. After all, it is not necessary to make a frame in this case. After the construction of the structure, it must be fixed to a tree (make sure that the branch used is strong) or a beam. For fixing, a cross-twist rope with a diameter of at least 24 mm is suitable (especially for swings on which children will ride).

You can replace the rope with a chain suspension. So you make the whole structure much stronger. So that the chain links do not harm children (fingers can get into the links), you need to place it in a suitable size plastic pipe. Alternatively, you can take a chain canopy with a small caliber. It is worth noting that to install a frame garden swing, you should choose the right place on the site, avoiding trees and various kinds of fences.

Correct choice of support

A swing support is not just a structural element, but its main component. The safety of being on a swing and the permissible amount of swing will depend on its strength. Most often, the material that is used to make the support is wooden beams, metal pipes and corners. For a summer residence, a support in the shape of the letter A is often enough. For this, a frame is built from two supporting elements. Between themselves, they are connected by a transverse beam, which is installed horizontally. Its placement occurs at the level of one third of the column above ground level.

The crossbar itself, on which the seat is then hung, must be mounted to the uprights, which are vertical. Use screws for fastening.

Important: metal swings must be fixed in the soil. Because in the process of rocking the "leg" of the pipes loosens and twists out of the ground. To prevent this, support frames are created. Alternatively, concreting into a trench can be done.

But for a more durable fixing of the wooden structure, you need to bury the "legs" of the garden swing to a considerable depth (at least one meter). It can also be filled with concrete. But before concreting, it is necessary to carry out preparatory work. Bituminous mastic is applied to the support so that the “legs” are well saturated. This will protect the wood from decay processes. A brick is laid at the bottom of the pit.

Video: do-it-yourself garden swing made of metal

Do-it-yourself construction of a garden swing made of metal

Metal is a durable material and heavy enough to make the entire structure of the garden swing strong and stable. This choice is ideal for building a swing that teenagers and adults will ride on. Also, the metal base will be more wear-resistant to heavy loads.

Metal garden swing

Be sure to use the drawing so that the entire installation is done correctly. Therefore, further step-by-step instructions are presented so that you can build a garden swing with your own hands from metal (drawings and dimensions, photos will be indicated below) in your country house. Of course, the options are selected individually. And in the photo we show only one of the possible.

Drawing of a metal garden swing

The construction of this installation begins with the preparation of materials:

1. pipes cut in accordance with the required dimensions;
2. burrs and sharp protrusions should be removed with sandpaper.

1. Form a base. To do this, the supporting elements must be fastened at an angle of 45 degrees. Then install the crossbar. It should be strictly perpendicular to the uprights themselves. At this stage, you should use a welding machine to connect all the elements as firmly as possible.
2. It is necessary to make recesses to secure the support. Pour sand to the bottom, which must be well compacted. Then install the support and pour concrete over it. The entire structure is left for at least a week so that the solution dries well and sets.
3. As soon as the filling dries, you can proceed to fixing the seat. Before installing it, you need to weld special hooks using a welding machine. The seat itself is hung on ropes (high strength) or on metal beams.
4. The final step is to paint all the elements of the garden swing. This measure is necessary not only to give the structure an attractive appearance. By painting it, you will protect your creations from rust and corrosion. It is also possible to decorate according to your taste and imagination.

Finished metal garden swing

If you feel that this option is beyond your power, then you can stop at a simpler copy of it. In this case, you need to stock up on a regular metal profile (diameter 50 mm).

Drawing a simple model of a metal swing

On the drain (transversely), attach special metal brackets. To do this, use bearings and a welding machine.
Install the seat on suspensions and attach to the structure itself. Most often, metal rods or chains can be found as suspensions.

A simple version of a metal swing

The creation of exclusive models looks original and attracts the attention of others. It can be forged products or a swing made from channels, or rather from their scraps. The swing benches made by yourself look interesting.

Wrought iron garden swing

Wooden swing

They are especially popular. After all, wood has always been popular as a building material. Building a garden swing with your own hands from wood is as easy as from metal. Drawings and dimensions, photos from the Internet to help you. It is only necessary to use suitable projects, then you will get the perfect result, and the photo of the homework is proof of this.

DIY wooden garden swing

Such structures have their advantages:

1. naturalness and environmental friendliness;
2. presentable and original appearance;
3. strength (in case of impregnation with specialized solutions and substances).

Drawing of a garden swing made of wood

The most suitable tree species are birch, spruce or pine. For construction you will need:

• wooden pole - 2 pcs.;
• cross bar;
• rope - about six meters;
• hooks or suitable hangers;
• elements for fastening the structure (the ideal option is to use bolts).

If you have a wooden beam, then building a swing on four poles would be a great option. But this design requires some attention and effort.

1. Initially, you need to make a support. Two parts of the bars need to be assembled in the shape of the letter A, as shown in the photo.
2. After that, you need to fix the crossbar.
3. In order for the installation to be as strong and reliable as possible, you need to use short bars.
4. From the same bars you need or a seat. And don't forget the backrest for maximum comfort.

Beautiful garden swing

Construction of a children's garden swing

The process of building a swing for children is similar to the construction of an adult version. We need a detailed design diagram, drawing the dimensions and locations of the elements for fastening. When using blueprints for adults, be sure to optimize it for children.

1. Racks need to be made. They must be the same size.
2. The racks are installed at a distance that directly depends on the width of the future seat.
3. Connect both supports with a crossbar.
4. Particular attention should be paid to the reliability of connections. To do this, you need to measure as accurately as possible the angle at which the elements of the racks, which are located vertically, will be connected.
5. You also need to ensure that the crossbar itself is equally removed from ground level.
6. Before installation, you need to dig a trench. It creates a special pillow of gravel. That's where the supports are placed. After installation, everything is poured with concrete mortar.
7. There is a grinding of the entire structure, it is also necessary to round the corners. This is necessary in order to make the swing safe for children.

Children's swing

Your dacha will sparkle with new colors when such a swing made on its own appears in the yard. It is not only useful, but also incredibly beautiful.

Fixing system

There are various mounting systems for garden swings, namely:

• carabiner - made from the following types: with a rectangular section (intended for beams) and with a circular section (for bars);
• anchor - the type of fastening passes through;
• staples and hooks - designed for children's models;
• clamps - needed for fixing in case of hanging the swing on cables.

Therefore, carefully study the features of each system. After all, the right choice of fasteners allows you to make the swing not only durable, but also reliable.

Rope swing

The most classic models are rope and log swings. This option is considered the easiest to manufacture. To implement such an idea, it will be enough for you to make four holes. Use a wide log as a base. A rope must be passed through the holes made.

Rope garden swing

Using the same ropes, you need to put on a board for the seat. But you need to be careful. This option is not entirely sustainable. To prevent the seat from flipping over, make four holes on the side and thread the ropes through them.

The ends of the rope must be tightened well and tied with strong knots. And the swing is ready to use.

Today, DIY garden swings make a chic and unforgettable impression. It just takes a little patience and attention. What will the swing be like? Frame made of metal or mobile made of wood? It's up to you, but the swing must be fun. And all the most interesting about the independent construction of a garden swing, see the video below.

Video: wooden swing

Solid, suitable for the general style of the landscape, a wooden swing in a summer cottage is a joy for children and adults. Purchased public models usually do not differ in quality and variety. It is much more interesting and useful to approach the process on your own and make a country swing, giving your site a unique flavor. After all, there is nothing particularly difficult in this.

Wooden swings are divided into three main types:

• • frame, standing on stationary supports (classic version);

Frame swing

• • hanging on ropes or cables, such as "bungee";

Suspended swing, "bungee"

• swing-"scales" or balancing. This type of swing is for two.

Any model is played up in such a way that all the neighbors will envy, and the household will choose their favorite corner of the garden or yard.

Where to place?

If the choice is made in favor of the classic "bungee", we hang it on the nearest tree, which inspires confidence in terms of strength. When choosing a place for other types of structures, it is reasonable to consider the following factors:

• sufficient distance from walls, fences, trees, wires, thorny bushes and pointed objects;
• illumination. It is desirable that the sun hit the site until the evening. So the wooden material is insured against dampness;
• it is better to immediately pick up a smooth surface relief so that you do not have to carry out additional work;
• the place should not be "blown through with all the winds." Drafts are fraught with quick colds.

It is good if there is sand or a soft lawn under the swing. This will help in the event of a fall not to get serious injury on a stone or rebar.

Drawing

You can do without it. But if a serious project is conceived with a claim to long-term service, then it is better to prepare a drawing of a swing for reasons of saving material. Designing a homemade swing is not difficult.

General provisions that reflect the drawings of a garden swing made of logs:

• frame structure;
• sizes. For a swing, this is the height and area of ​​\u200b\u200bthe base;
• places of fastenings and reinforcing elements should be marked;
• number of seats and their type;
• the length of the suspensions and their type.

An example of a drawing of a wooden swing

Material selection

It is important to focus on the quality of the material from which the swing will be made. High-quality wood will not only ensure the durability of the structure, but also guarantee the safety of use.

Species such as cedar, oak and larch will not deceive expectations. Spruce, pine and birch are also strong enough.

Lumber must be chosen dry, without traces of mold or foci of decay. There should be no falling knots, crevices, holes made by pests. A large volume is not required for a wooden swing, so you can check every board and beam.

Tools

To make a wooden swing you will need:

A strong branch

• mix for concrete mortar;
• nails, self-tapping screws, bolts, corners (in accordance with the project);
• tape measure and plumb;
• hacksaw;
• hammer;
• antiseptic for processing wooden parts;
• grinder (or drill with a nozzle);
• screwdriver

This is the main arsenal. When everything is ready (material, drawings and tools), we begin to make garden swings from logs.

Caring for a wooden swing

1. Annual treatment with a special compound or painting will save the product from decay and pests.
2. From the end to the beginning of the season, it is necessary to cover the swing with waterproof material.
3. Avoid rust on metal parts.
4. Do not give disproportionate loads.

Such a swing will delight more than one generation, subject to these simple and understandable rules.

And if they fit better into the design of your garden, then it will be more difficult to make them. But they will last you longer.

It is good if a cozy resting place for the whole family is equipped on the plot. Even in a small area, you can place a gazebo, a canopy, several small benches. Do not interfere on the site and garden swings.

They can be made for both children and adults. Building a wooden swing with your own hands is quite simple. To do this, you need to follow the instructions.

The subtleties of the construction of garden swings

When creating a wooden swing for the garden, you will need to decide on the main material. It can be metal, wood or plastic. They are most often used in the construction of swings with and without backs. When creating such a design with your own hands, it is best to pay attention to wood.

Such a swing will undoubtedly have its drawbacks. However, they are relevant to all outdoor wood products. With proper processing and installation of the structure, it will serve for many years. Such a swing will not suffer from the effects of negative environmental factors.

The most unfavorable of them are:

• snow;
• rain;
• mold and fungus;
• rot;
• Sun rays;
• temperature fluctuations.

You can quickly build a swing in the garden with your own hands.

Advice! To prevent premature deterioration of wood, it is worth using special tools to protect wooden elements. You can also put an awning over the swing.

The benefits of making your own swing

Wood has many positive properties that ensure its successful operation in different conditions. This allows you to make a wooden swing for giving not only comfortable and beautiful.

Wood structures have the following features:

• Environmental friendliness. Wood is a natural material that is completely safe for humans and animals.
• external attraction. The swing, made of wooden elements, can fit perfectly into any landscape. This is because in the garden, most of the surroundings are natural materials. Compared to metal products, wooden swings look much more harmonious in the garden near a country house.
• High level of security. Wood has softness and flexibility, which helps to avoid many injuries during the operation of the swing. This advantage is especially true if the design is intended for children.
• Ease of installation. Almost everyone can build a swing on their own. The main thing is to get acquainted with the construction technology of the structure.
• Versatility. Such material is excellent for processing. It can be cut, sanded and turned. Swings are made both single and in the form of spacious sofas. For work on the design and construction of the swing, you will not need to involve specialists.

Attention! With the independent manufacture of wooden swings, you do not need to spend money on the work of specialists. Also, the material for the construction has a fairly low price.

Swing sizes and models

With the independent construction of a wooden swing, you should take care not only of finding materials for the structure, but also of creating a project. You will also need to determine the location of the swing. To speed up work, use photos of finished products. You can also use existing drawings.

Swings made of wood have many types of designs. Each of them should be considered in more detail:

A photo of a wooden swing from above confirms that portable structures look quite attractive. When choosing the type of swing that you plan to install on your site, you should pay attention to the features of the backyard area.

Location selection

Any construction planned on a summer cottage should first be designed. Also, before work, the optimal place for construction is selected.

Attention! All principles that are used when choosing a place for a swing apply to both family and children's swings.

It is best if the platform on which the swing is planned to be installed is flat. You should also choose a place where shade will remain during sunny days. You can install a swing under a spreading tree or place them directly on the porch, where a canopy will save you from bad weather.

Such factors directly affect the comfort of people resting on a swing. For example, it is rather unpleasant to sit on a seat that is too hot. If the structure is outdoors, the wooden elements may deteriorate from constant exposure to precipitation.

You also need to choose a place where there will be enough space for rocking. It must be taken into account that during the day the shadow will move depending on the position of the sun in the sky. It is better to place the swing where the shadow is by noon. This is the time when the heat is at its strongest.

Drawing of a wooden swing

Building a swing with your own hands from wood is quite simple. To do this, you need to perform an accurate drawing. Simple hanging structures that are mounted on an A-shaped support will fit perfectly into both a large plot and a small garden. Their construction does not require much effort and time. You need to prepare the following tools:

• hacksaw;
• pins;
• Circular Saw;
• square;
• roulette;
• jigsaw.

Also, to complete the swing, you will need a planer and a hammer, a chisel, saw goats, a screwdriver, an electric drill.

Attention! Purchasing ready-made swings is, of course, a faster and easier option. However, in order for the design to fully meet the needs of the site owner, it is worth drawing up an individual project and doing all the work yourself.

Phased construction

You can create a swing for a summer residence with your own hands quite quickly. In order to avoid problems during the direct performance of work, it is worth drawing up a drawing in advance. It will reflect all building materials with indication of dimensions. Based on a detailed diagram, you can easily understand which building elements you need to buy.

For example, you will need bars for racks, boards for the back, seat and armrests. You should also stock up on fasteners. It is better if pine impregnated with special compounds is chosen to create the structure.

Advice! In advance, you should prepare an antiseptic with which the wood will be treated. In addition, you need to choose materials for finishing wooden swings.

Such subtleties of the construction of the structure should be taken into account even at the planning stage.

In addition to fasteners, you will need to prepare spacers, a chain (2 cm thick), hooks, sandpaper.

DIY family swing

The best place to install the structure would be the backyard. In most cases, it is equipped specifically for recreation. Here the swing will look cozy and harmonious.

From the end of each supporting leg for a swing, a marking of an inclined cut is applied. Such work is carried out using a square. The result should be a bevel along which the cut will be made.

Before sawing wooden structural elements, you must first fix them in the mounting goats. Sawing should be according to the markup. Do not forget about controlling the parties. Sometimes you need to process an already made bevel. To do this, use a planer.

To make the second leg identical, you should attach the first butt joint to it. Each mark is transferred to the second leg. Then they are cut through. After that, each leg is laid on the edge in such a way that there is 1.2 m between their lower parts. The upper ends of the legs are adjacent to the transverse beam.

Half a meter is marked from the bottom of the supporting legs and a lower bar is applied to fasten the legs of one side of the swing. The top fastening bar should be located below the cross beam by 15 cm.

As soon as the supporting legs of each side are fastened, the cross beam should be mounted. The seat is created on the basis of the L-shaped frame. In this case, the boards must have a thickness of 50 mm.

Attention! If you want to build a children's swing, you just need to shorten the seat.

To hang the swing on both sides of the structure, it is worth mounting the screws on which the rings will be fixed. Such elements must be used to connect the swing and support using suspensions. Usually chains are used for wooden structures.

The connection of the main parts is carried out with the help of carabiners. The length of the suspensions is selected in accordance with the wishes of the site owner. It is better if the bench is placed at a height of 30 cm from the ground.

Advice! Chains can be seen with a fairly strong rope. This is due to the fact that such products do not create a lot of noise.

Completion of work

At the last stage of the construction of the structure, all its elements are treated with varnish. This will ensure that the surface is as smooth as possible, and will also preserve the natural look of the wood and increase the life of the swing.

The design can also be painted in any color. In addition, many install a small canopy. It is worth including fantasy in the process, and the swing can be made as original as possible. To make the swing more comfortable, you can put pillows on them.