Operating instructions for the centurion x line alarm. Instruction manual centurion x line. Calling the driver from the car. Turning on the service mode. E. light signals

Every car owner who has ever faced the need to purchase an anti-theft system knows that choosing an alarm can sometimes be problematic. In this article we will talk about what the Centurion alarm is. In addition to the main characteristics and features, you will also learn how to determine the device model from the key fob.

[ Hide ]

Characteristic

The Centurion alarm system is a system for protecting vehicle in the absence of the driver. Almost all models of service or civil car alarms are characterized small size and stylish design key rings. Most keyfob models use a pulse coding system, as a result of which the code will change every time a key is pressed. Accordingly, the use of interception systems and grabbers by attackers will not give any result.

Car alarm Centurion

In addition, many models of service and conventional car alarms are equipped with two-level microwave shock sensors. Such a device will notify the motorist not only of a strong, but also of a weak blow to the car body. It should be noted that the device will respond to touches on the car every 5 seconds after you have activated the alarm.

As for the rest of the features anti-theft systems:

1. Many models are equipped with a dynamic device protection code for interception.
2. Key fobs with control buttons are made in steel cases, which eliminates the possibility of damage when dropped.
3. Key fobs are equipped with special buttons that allow you to find the vehicle in the parking lot if you forgot where you left it.
4. You can turn it on only - without using a siren and a shock sensor.
5. If necessary, the car alarm can be activated while the engine is running.
6. The central locking relays are initially built into the system.
7. Like many other devices, the Centurion car alarm is equipped with a special service button (the author of the video is Learning to drive. All secrets for beginners).

Types and models

Now consider the system models:

Centurion X Line. Models of the X-Line line are among the most popular among motorists. Equipped with two key fobs - with one-way and two-way communication. The release of models of the X-Line series continues today.

• Models I-10 and I-20.
• IS-10.
• IX-10, IX-30.
• IM-10.
• IG-20, IG-40, IG-50;
• Model Tango.

Learning to identify the model by the key fob

You don’t have many options to determine the car alarm model by key fob:

1. First of all, you need to fully inspect the remote control itself with buttons - often the manufacturer indicates the system model on it. Usually this information is indicated in small print and can be almost invisible, so take a closer look at the device.
2. In the event that there is no button on the remote control necessary information check out its design. In some cases, the manufacturer manufactures remotes with a unique appearance, which is inherent only to a certain brand.
3. If these options did not help you, it remains only to use the services of specialized centers that service anti-theft systems. You can find several sites on the network where you can identify a model, in principle, by one type of remote control, although it is problematic.

Instructions for use

How is it made - detailed instructions presented below:

1. As the manufacturer writes in the instruction manual, the main unit is installed first. It is best to install the unit in the cabin, as the instructions say, so that it is not affected by moisture and high temperatures. As for the antenna, it is installed at the top windshield, this will improve the signal.
2. After that you need to install emergency button- with its help you can turn off the siren if you accidentally lose the remote from the signaling. At this stage, it is important to think about and install the button so that a potential burglar cannot find it when trying to open the car.
3. The next step according to the instructions is to install the siren. This component is installed in the engine compartment. To prevent the siren from quickly failing, it should not be placed in close proximity to the engine, since high temperatures will kill it.
4. Next, the shock sensor is installed. According to the instructions, it must be installed in the passenger compartment, on the body itself. After installation and connection of the signaling according to the instructions, it will need to be configured. Setting is carried out by easy tapping on the body and correct selection sensitivity level.
5. The last step is to install fuses on the circuit so that in case of possible short circuits, the system is not affected.

Video "How to install the system without errors?"

Find out what mistakes our motorists often make in practice when installing anti-theft systems - find out from the video (the author of the video is Autosound Base).

Signaling Centurion models XP is a reliable security tool that allows you to autorun. In another way, this model is called X-Line, and further in the text it is referred to as the same. Generally X-line system released in three different versions. Here it will be considered how to set up a system released in version V3. For the second version, that is, for V2, the instruction is also similar - the differences will be in the absence of some options. We are not talking about the XP V1 system - the tables containing all the options look different there. BUT total number these tables in the signaling Centurion is equal to 5.

Method for setting up Centurion systems

Usually, the car alarm is programmed as follows: by pressing the service button, the option number is selected, and the value is set with the key fob key.

Keyfobs Centurion XP V3

In our case, the process looks simpler:

1. The ignition is turned on and off 3 times;
2. The service button is pressed (2 * N - 1) times, where N is equal to the table number;
3. The button is pressed and held again - you will hear N short beeps and one long;
4. The button is released, a new value is selected by pressing the keys on the key fob.

The first option always corresponds to button 1, the second - button 2. Press and the values ​​​​will change: 1, 2, 3, again 1. To select options with higher numbers, pair combinations are used, such as 1-3, 2-3, etc. .d.

Standard security features

There are two kinds of options: those related to autorun and others related to security. All options of the second type are collected in tables 1 and 2. How to access them was discussed above - the number N is equal to "one" or "two".

Security Related Parameters

By default, the value specified in column 1 will be set. By the way, intermittent blocking is an imitation of a breakdown.

There is a whole set of parameters that the owner cannot change. These values ​​are always set in the installation centers:

1. Pause duration before door sensors start tracking (option 1-4);
2. Assignment of outputs connected to the central lock (1-8);
3. The duration of the control pulse of the central lock (2-1);
4. Work algorithm additional output(2-9): a single pulse when the ignition is turned off after starting by autostart or a second pulse for unlocking in two steps;
5. Polarity of inputs (2-10).

Consider option 2-7. Let the value "2" be set and the timer works perfectly. Then you don't need to change anything. But if the ignition support turns on intermittently, it is better to switch to manual mode (value 1). And then, according to the instructions, the owner will press the service button before removing the key.

In X-Line systems, the ignition support activation method is non-standard. First, the handbrake is activated, then the button is pressed, and only then the key is removed. And using the "auto" setting, the second step can be skipped.

Consider how to install the code:

1. Set option 2-5 by pressing keys 1 and 2 for 3 seconds;
2. By pressing the service button, enter the first digit;
3. Turn on the ignition;
4. If required, enter the second digit;
5. The ignition is switched off.

Usage personal code can be cancelled. To do this, buttons 1 and 2 are pressed briefly. But then the car alarm will turn off in almost one action: the ignition is turned on, and then the service button must be pressed once. However, the focus should be on safety. And the instructions recommend setting the code immediately.

Manual

Engine start options

We will consider the options that are associated with autorun. The owner should not change the settings of most of them: a lot here depends on how the installation center performed the installation. Adjustable parameters will be collected in tables:

1. Table 3 - the purpose of some outputs that the car alarm activates or disables at startup;
2. Table 4 - those parameters that the owner must configure himself (except for 1 and 9);
3. Table 5 - a method for monitoring the operation of the engine, as well as learning "idling".

These tables are shown in the photo below.

Options auto start

All branded car alarms must have different variants settings, and the X-Line system was no exception. According to basic instruction, value 2 corresponds to de-energizing the output for the duration of the starter operation (functions 1 and 5). And “option 3” for function 7 is “pressing the button” both before and after an unsuccessful start by autorun. "Option 2" corresponds to a single press.

Let's explain what options 1 and 5 mean (Table 3). Let's say a crawler was connected to the black-green wire in the mounting center. Then:

1. Use option 1 for option 5 as the installer;
2. If autorun starts successfully, go to option 2.

The black-green cord can also be connected to a relay that switches current in standard lines (ignition or accessories). And also, if the installation center mounts the heating equipment, then the wire will be the control output for this equipment - then use the value "more than 3".

For all X-Line car alarms released in version V2, option 3-5 is configured differently: it does not take values ​​greater than 4. And "number 4" will mean the following - the current in the line appears a minute after the engine is started by auto start.

Screenshot of the signaling manual V2

Training and advanced customization

Suppose the "white-red" control cord was connected to the tachometer during installation, and the value 1 was selected for option 5-2 in the settings. This means that the car alarm controls the operation of the motor using the tachometer. And then she needs to be taught to recognize turns:

1. Start setting up option 5-3: button 2, as stated in the instructions, is briefly pressed once;
2. Start the engine;
3. Press the service button without releasing it for exactly 2 seconds;
4. One long beep should sound;
5. Press key 1.

We wish you success.

If there was no signal in step 4, try changing the sensor sensitivity (option 5-4). The starter stops ahead of time - the sensitivity is increased. And vice versa.

It is also necessary to adjust the sensitivity when the control is carried out using a voltage sensor. The installation option that is suitable for most cars is high sensitivity. If the engine stalls after starting, change the value to what was set by default. Be aware that the assembly center is not required to select the settings for each car separately.

Choosing an autorun algorithm

Be aware that autoplay will need to be enabled:

1. Press the F button for 3 seconds;
2. Press the F button 3 or 4 times - this will be a timer or temperature start;
3. Each press of button 3 causes the “START” icon to appear or disappear.

When turned on, there are three sound signal, when turned off - four.

Choosing an automatic start method

You can change all values, that is, interval and temperature, like this:

1. The F button is pressed for 2 seconds;
2. Click on button 3;
3. Press buttons 1 and 2 to select one of the icons labeled "START";
4. Click on button 3;
5. Press buttons 1 and 2 to complete the selection;
6. Wait 10 seconds.

In general, nothing complicated.

See what option 4-7 looks like. The first option, according to the instructions, implements the following algorithm:

1. The temperature is checked at the set time.
2. Let's say it is below the set value. Then the launch will take place.

The focus is on temperature. But time also matters, if we talk about "option 1".

Signaling control methods "Centurion"

Due to the development of technology in the arsenal of modern intruders, there are many tools and devices designed to hack anti-theft systems. However, alarm manufacturers are also constantly improving anti-theft installations, offering consumers both traditional signaling and immobilizers. How to determine the model by the key fob in the Centurion alarm and what kind of signaling it is - read below.

[ Hide ]

Alarm characteristic from Centurion

The purpose of this anti-theft system, like any other signaling, is to protect the car from theft. Almost all signaling models have small dimensions, as a result of which their installation is simplified, as well as functional control panels, characterized by a stylish design. As practice shows, most modern systems use a signal encoding system, due to which the probability of intercepting an impulse and its further use is very small. This is because this system allows you to change the access code each time you arm and disarm the car.

Complete set and parameters

The Centurion alarm includes the following components:

1. Main control block. These are the "brains" of the anti-theft system, which in fact perform the main functions.
2. Two key rings remote control. As a rule, one remote control is equipped with a display and a function feedback, and the second is a backup, which has only buttons.
3. Advanced two-level microwave shock sensor. Thanks to this element, the owner of the vehicle will always be notified of a possible impact on the car body. If someone hits the wheels or tries to break the glass, the sensor will consider this as a burglary attempt and activate the siren.
4. Diode indicator. Thanks to the light bulb, not only the owner of the car, but also intruders can know that the car is under protection.
5. System switch.
6. The blocking relay, in fact, performs. If an intruder still gets into the car and tries to start it, the relay will block the engine, thus preventing the car from moving naturally.
7. Two trailers.
8. Wiring kit, as well as mounting elements for installation.
9. Service book for operation, which contains basic information on installing the signaling, its configuration and further use.

We also invite you to familiarize yourself with the main technical features alarms:

1. Majority modern models allow you to protect the machine when the engine is running. This feature is especially useful in winter time years, when the driver needs to move away for a while, but you don’t want to turn off the engine.
2. Availability dynamic code protection. This function allows you to protect the signal from being intercepted by a code grabber and other devices.
3. If necessary, the car owner will be able to use the signaling as a central lock. That is, you can connect a system without a siren, as well as a shock controller.
4. Several independent security zones, their number may differ depending on the system model. This means that if a malfunction is detected in one of the zones, for example, the limit switch fails, then the protection of other zones will be carried out in full.
5. On most models, the control panels are made in metal cases, as a result of which the possibility of damage to the device in case of a fall is eliminated.
6. Also in most modern models there is an option to search for a car in the parking lot. There is a special button on the remote control, by pressing which, the signaling siren will make several sounds so that the car owner can understand where the car is (the author of the video is Andrey Tyshkevich).

The lineup

Let's take a quick look at the most popular Centurion signaling models:

• X-Line is one of the most sought after options;
• models of the I-10 and I-20 series;
• Tango v1. V2 and V3;
• model IS-10;
• Twist V1, V2 and V3;
• Nad V1, V2, V3;
• XANADU V1, V2, V3;
• NEXT;
• Xanta;
• xabre;
• IG 20, 40, 50;
• Bike Keeper - specifically for motorcycle transport;
• IM-10;
• XP V1, XP V2;

Pros and cons of devices

It is logical that each device has both its pros and cons.

Centurion benefits are as follows:

1. The ability to choose a model in accordance with financial capabilities. If the budget allows, then you can buy the most functional anti-theft system, if finances are limited, then you can always choose a more affordable option.
2. Clear and detailed instructions that come with the kit. Thanks to this, the car owner will be able to install the signaling in the garage without any problems.
3. Durable keyrings that can withstand bumps and drops.
4. Multi-level shock sensors that allow you to timely detect a burglary attempt and warn the driver about it.
5. The presence of an immobilizer in the kit for most models. So you get an extra layer of protection.

Of the shortcomings, a small radius of action can be distinguished. Despite the fact that the range depends on the signaling model, in most anti-theft systems it is quite weak. Especially if there is interference in the control radius, in particular, trees or buildings (the author of the video is Alexey Tyshkevich).

Operation and installation manual

Installation nuances may vary depending on the model, but in general, the installation process is as follows:

1. First of all, it is necessary to install the control device - the block. This component should be placed in the passenger compartment, in a place where the criminal could not find it. Also, during installation, it must be taken into account that exposure to moisture or elevated temperatures can damage the unit.
2. Then the antenna adapter is installed. It needs to be installed at the top. windshield, this will allow you to achieve the best signal reception.
3. After that, the siren is installed. This element systems should be placed in the engine compartment, but note that it also does not tolerate exposure high temperatures and moisture. So put the siren away from the cylinder block.
4. When these elements are installed, a service button is installed, which will allow, in case of loss of the remote control, to turn off the siren. Please note that the button must also be installed in a place inaccessible to an attacker, but in such a way that, if necessary, you can quickly get to it.
5. Then the shock sensor is installed. It must be mounted directly on the car body, preferably in the cabin, near the ceiling. Thus, its coverage area will be as effective as possible.
6. Further, the installation of safety elements is carried out, they are necessary in order to prevent the signaling from failing in the event of problems in the network.
7. Then all elements are connected to the control unit using the mounting kit and wiring that comes with the kit.
8. When everything is installed, it remains to configure the shock sensor. It is necessary to optimally select the sensitivity of the controller so that it does not work without a reason.

Photo gallery "Installation of signaling"

Learning to identify the model by the key fob

If you need to find out the signaling model from the control panel, then you have several ways to do this:

1. First you need to inspect the key fob and its keys - the signaling model may be marked on the device case. Please note that this data is usually indicated in a minimal font that is almost invisible to the eye, so you should take a closer look, as an option, you can use a magnifying glass.
2. If visual diagnostics did not give results and there is no data on the remote control, then pay attention to the design. It happens that some signaling models have key fobs with original design characteristic only for a particular species.
3. If this method did not help, then you can try to search for information on the Internet. Today there are many sites where you can upload a photo of your remote control and get, if not the exact answer, then the closest one. But if the signaling model is very old, then this method may not help.
4. The last option is to seek help from specialists - this can be an auto electrician or a whole service center involved in the installation and maintenance of alarms.

Issue price

The price of the system is determined by its efficiency, as well as functionality. The cost of Centurion signaling is from 3 to 9 thousand rubles.

Tango V2 Overview Video

A detailed review of this model from the consumer is presented below (the author is the Vit Shaden channel).

Modern car alarm Centurion XP has the function of automatic engine start, responds to attempts to open and steal the vehicle.

It has a compact size, easy to operate, has a good ratio of cost and quality parameters.

Device package

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

The Centurion XP device, which is used as a car alarm, has the following equipment:

1. Five-button keychain-pager with LCD.
2. Four-button conventional key fob.
3. signaling unit Centurion XP.
4. A set of wires for installation.
5. User Guide.
6. Temperature sensor.
7. Valet button.
8. Blocking relay.

The signaling unit has small dimensions, the connection diagram of the device is in the user manual.

Functional range of the device

The alarm system for the machine, which is produced by the presented company, has the following functional range:

• auto start in cars with injection diesel and gasoline engines;
• performing autostart when using the key fob or turning on the timer inside the car;
• implementation of blocking using a relay;
• illumination of the car interior;
• the possibility of using not only one, but also four additional control channels;
• the alarm system performs both sound notification and vibration;
• radio check mode can be programmed;
• on the key fob screen, you can display information about the status of locks, enabling or disabling the security mode, the status of sensors;
• the ability to save the key fob battery charge and switch to economy mode;
• Enabling a temporary key fob blocking mode.

The alarm system responds to attempts to break locks, strikes, attempts to start the engine. Manage security system stands with the help of a five-button remote control with an LCD display.

Benefits of using the system

This car alarm has a low cost. You can install it yourself, according to the instructions in the package. Also, the advantages of using this particular system are the following:

• multifunctionality of the security device;
• communication range, from 300 to 500m;
• mode support automatic check radio signal;
• there is an auto-start function, on the keychain you can turn on the clock, alarm clock or timer.

Experts in the field of car alarms note that the presented model has practically no drawbacks. The only thing that can be called negative side this mechanism - a separate input for the volume sensor is not provided.