How to make a new lampshade. Original lamps and lampshades with their own hands. Ideas, master classes. How to update an old lighting fixture

Cozy evenings with a book in your favorite armchair, soulful tea parties with your family in the kitchen, romantic dates with your loved ones... And above all this - a familiar, familiar, traditional lampshade for table lamps, a wall lamp or a floor lamp standing on the floor.

Beautiful handmade lampshades become noticeable and indispensable interior items. They bring a touch of romance to everyday life and fill the home atmosphere with warmth and beauty.

The material for the manufacture of a lampshade for a lamp can be fabric, paper, beads. By showing imagination and patience, you can transform old lampshade for a lamp with your own hands beyond recognition. Such an exclusive element will make the interior individual and truly homely.

Master class on making a lampshade for a lamp with your own hands

A popular material from which do-it-yourself lampshades are made is fabric. Linen, silk, jeans, organza - any option.

A whole piece or strips of matter will do. You can simply cover the frame with printed fabric, make it plain with embossed flowers from the same material.

It is important to understand in advance exactly where your lampshade will “live”. Romantic surroundings require an appropriate "companion", strict minimalism - another.

Expert tip: As a basis for a lamp, you can take a frame from an old lamp. Making it yourself out of hard wire is also easy. And the lamps should be of an energy-saving type - so that the fabric does not catch fire.

How to do beautiful lampshade with your own hands?

We take finished frame, for example, with a ring diameter on top of 20 centimeters, on the bottom - thirty-six, and a height of twenty-eight centimeters;
we select the fabric and cut it into strips, the width of each is four to five centimeters; about twenty-five bands in all;
the edges of the tapes must be even;
iron them well with an iron;
we wrap the upper ring with one edge of the tape and sew it on by hand;
now we lead it down and wrap the lower ring, and again the upper one;
when the strip ends, we fix its edge by sewing it to the fabric;
take a new tape and continue;
when the whole frame is wrapped, we sew for the edges of the "belt";
for this we take two strips of matter of a different shade and cut out two strips from it, each thirteen centimeters long and ten wide;
we iron the tapes, bending the longitudinal edges by 2.5 centimeters to the inside;
then fold the strip in half;
stick double-sided tape on the hoops of the frame;
we glue a strip of fabric on it, cutting its edge a little along the way so that the matter lies as evenly as possible;
fold the second edge of the ribbon inner surface cases and also glue with adhesive tape;
thus we decorate the top and bottom of the frame with “belts”.

You can make a edging from a crocheted ribbon or from a ruffle.

DIY lampshade made of plastic and fabric

The second homemade lampshade is also made of fabric. You can make it on the basis of an old lampshade. Or you can transform a typical product bought in a store like this:

DIY lamp shade. Photo

- the first step is to measure the circumferences of the upper and lower rings, as well as the height of the frame;
- add two centimeters from each edge to the obtained dimensions so that seams can be made;

DIY lamp shade. Master Class

- we take a sheet of thin plastic and cut out a rectangle or a trapezoid from it - the basis on which the homemade lampshade will be held;

How to make a lampshade with your own hands. step by step photo

- cut the fabric to size, use masking tape to glue it to the table;

- glue the matter on the plastic;

Master class - do-it-yourself lampshade. Photo

- we bend around the frame of the lampshade with the received part and fasten its edge with the help of clamps;

- mark on the fabric the place where the seam will pass;

- remove the paper clips and glue along the intended line with glue; press the joint with something heavy and let it dry;

Homemade lamp shade. Photo

- then we turn the lampshade over with our own hands and also glue it inside;

- now you can glue the connection of the body with the rings;

- when everything is well fixed, remove the clamps;

- decorate the bottom and top of the lampshade with a paper ribbon; glue it so that one edge extends beyond the ring;

- bend the free edge inside the case and glue it;

- we fold a strip of fabric of a different color, as long as the height of the lampshade and five centimeters wide, in half, bend the edges inward, iron;

- apply glue to the inner surface of the tape and glue;

Lampshade with your own hands. step by step photo

- glue the strip on the seam on the lampshade;
- cut out two ribbons from paper of the same width as the finished strip for the seam; then we glue it on the upper and lower edges of the lampshade; fix with clamps; glue a strip of fabric on top of the paper.
Homemade lampshade is ready.

Ideas for making a lampshade with your own hands with a photo

Such a "flower" lampshade will perfectly complement a romantic interior.

A little imagination - and a bouquet with colorful roses is ready.

Gentle tones create a romantic mood.

A "frill" of white roses is a great addition to a strict, simple design.

This wonderful lampshade brings back memories of grandma's napkins.

These origami-style lamps will look good in a minimalist interior.

Another representative of the ancient Japanese art creating masterpieces out of paper.

Light green-blue strokes will perfectly fit into the design of green tones.

Beautiful lampshade from postcards or pictures of the castle

Get beautiful and original lampshade. We will need a picture with locks, scissors, tape, a cutter and a small lamp (lamp).

Decorating lamps or creating lampshades is not only interesting, but also useful. You can get the perfect item that matches the interior of your home and still save a lot of money. You just need to buy the simplest lamp, and make it exclusive.

cozy house- this is not only the right furniture, but the right lighting. Thanks to a beautiful lampshade, the interior will become exclusive, and the room will become warmer and more comfortable.

If there is a desire to make a rearrangement in the room, then along with it you need to update the chandelier and floor lamp. You can buy just a new product, or you can change the textiles on the lampshade with your own hands.

A detailed master class on making a lampshade will help you create a unique, decorative piece of furniture. Getting to know everyone possible ways production, you can choose for yourself exactly the option that will be ideal for you.

Lampshade material

Having a finished frame, you can proceed to the choice of material for the lampshade. It could be:

textile;
plastic;
Knitting;
leg-split;
beads;
paper.

Waste materials that are usually thrown away are also suitable:

egg cartons;
newspapers;
gift wrapping;
old spare parts for a bicycle or car, etc.

Choosing the material for the lampshade, you need to remember its color. It should perfectly match the created style. In addition, you need pay attention to room lighting. If the room is poorly lit during the day, and there is twilight in it, then a lamp made of transparent or light material. For a bright room, you can choose a dense and dark material for the lamp - but this will depend on the overall decoration of the room.

As you know, red yellow add warmth and light to the room; therefore, in order to make the room warmer, you need to install a lamp with a yellow or red lampshade in it. If the room is located south side, and the sun warms up its walls all day, then the lampshade for the lamp installed in this room can be blue or green.

Gallery: do-it-yourself lampshade (25 photos)

How to make a frame for a lampshade with your own hands

The frame is a stable base, mainly consisting of two circles. Circles can be both different and the same diameter; they are interconnected by vertical partitions. The length of the partition is the height of the lampshade.

To make frame cylindrical shape , you need to make two circles of the same diameter. If you need to make a classic frame for a lamp, then in it the lower circle should be of a larger diameter than the upper one.

round shape can be obtained if the partitions are not straight, but slightly curved. The classic frame will only benefit from this.

The shape of the frame will be interesting if there is a ring at the base and not at the top. It turns out that the concave partitions will be connected at the top at one point, and at the bottom they will be fixed at the same distance from each other.

Best for making frames wire, since it can ideally keep its shape, besides, it is non-flammable. Suitable for work copper, aluminum or steel wire with a diameter of 2 mm.

DIY lamp types

I really want to update not only the furniture, but also the accessories after the repair in the room. These include lamps, chandeliers, floor lamps and table lamps. It is desirable that such a piece of furniture be an exclusive detail; it can be installed in the room on coffee table or in the bedroom bedside table or on a chest of drawers.

To get an exclusive chandelier model, you need to visit exhibitions of handicrafts. If the model you like is worth a lot of money, then you should not be upset. You just need to use your imagination, “turn on” your hands and head - then you can make an exclusive model with your own hands. Since a chandelier usually has not one, but several identical shades, it will take more time to make them than for one.

Modern lampshades can have the most different shape, decorate them to your liking. Preference is given to products decorated with colored beads.

If you want to update the lampshade for table lamp, That ideal option will be cardboard. It must be strong, but thin, then the product will be completely different from others. The work is performed in the following sequence:

From cardboard you need to cut 4 identical frames, similar to those into which photos are inserted.
A piece of fabric must be glued to the back of each product.
In each product, on the side, you need to make holes at the same distance. For this, a needle or awl is suitable. With the help of laces, the parts are sewn together, and a flashlight is obtained.

This method of creating a new lampshade is considered the simplest, in addition, the product is very light. Depending on the situation in the room, the color of the fabric with cardboard is also selected. The decor of such a product can be anything.

Thread lampshade

A ball made of threads looks very impressive in the interior. To make it, you will need patience and perseverance, and besides them:

thread or twine;
round inflatable ball;
PVA glue;
scissors.

The desktop should be covered with oilcloth or unnecessary newspapers, and only after that start work.

The balloon must be inflated and tied with a thread.
We wrap the ball with the selected thread. You can try to make different patterns, or you can just wind the thread around the ball without changing direction.
The winding must be tight.
Having reached the desired density, the thread can be cut.
Carefully impregnate the entire winding with glue. The better the thread is saturated with glue, the stronger the lampshade will turn out after drying.
When the glue is completely dry, the ball can be pierced with a needle and pulled out. Where the tail of the ball was, you need to cut a hole for the cartridge.

If, for some reason, you do not like the color of the resulting product, it can be repainted using spray paint.

The finished twine lampshade can be varnished, decorate with beads or beads.

Paper lampshade

So that the paper cannot heat up and catch fire when the light is on, the lampshade should be quite large. Under such a lampshade, it is better to buy an economical light bulb that heats up less.

Many ideas for making a paper lampshade for a floor lamp can be found on the Internet. Are used various colors, different figures are cut out. The result is a unique creation that can decorate any room.

DIY fabric lampshade

For work you will need:

piece of new fabric;
scissors;
tape measure or centimeter;
thread and needle;
pins;
textile glue or stapler.

Next, you need to choose an object for restoration: it can be an old table lamp or any other lamp that has been “living” with your grandmother for a long time. Think it through in detail appearance, which should be suitable for the already created interior of the room.

For example, you can make new lampshade for lamp from tissue to cell. It is sewn on a frame of a certain size. If the old lamp has a frame, then consider that half the work has already been done. And if the frame of the lamp is missing, then this is not a disaster - you can do it yourself, there is nothing complicated about it. Checkered fabric lampshade is ideal for country style.

How to make a lampshade for a floor lamp? A master class on its manufacture can be found on the Internet.

To sew a lampshade onto a cylinder-shaped frame, you need to measure its circumference and height. On the fabric, make a pattern according to the dimensions obtained, then cut it out like a template.

For the cone, you need to make a blank from whatman paper. Try on what was cut out, cut off everything superfluous. If something doesn't work out, you need to redo it.

The fabric for the lampshade is attached to the cone, and the pattern or ornament must be placed correctly. To make the surface smooth, the fabric must be stretched.

The fabric for the lampshade can be cotton or linen.

Lamp shade for children's room

When the child is small, the lamp in the nursery is very relevant. You can always buy such a product, but to make it, you need not only time, but also imagination. It is advisable to make a lampshade for a lamp together with a child in order to develop his imagination. Since the ceiling will stand in the children's room, you need to completely trust the taste of the child.

Naturally, the child will want to see his favorite cartoon characters on the night light. You will need to work hard, and cut them out of paper with him or buy ready-made translations. You need to use the idea with a print on cotton.

For the bedroom

If the bedroom is purely feminine, then the ideal option for a lampshade would be a model, tied with thread. The proposed version is crocheted of white threads of the iris type, which are used to knit napkins to decorate shelves or tables. You can pick up a pattern for thin knitting needles, if it makes it easier for you.

For a classic frame, a napkin is not knitted from 3 air loops. The length of the chain should be slightly longer than the top ring of the frame. Further, the lampshade is knitted in a circle, according to the scheme, like a napkin. It is possible that the height of the product will be greater than the length of the napkin, then it will be necessary to knit more in several rows.

The finished product must be washed and be sure to starch so that after drying it has a certain shape.

White knitted lampshade decorate with colored beads or colored ribbons- It all depends on your imagination.

In a creative experiment, the main thing is to choose the right shade of small decor elements. When the style, color scheme and shape are correctly chosen, then even the most simple thing handmade will look exquisite.

To make a lampshade made by yourself look neater and more beautiful, you need to first paint a new frame made of thick wire, and then carefully wrap it with cotton tape. Then the fabric of the sewn lampshade will not suffer.

Conclusion

It is very easy to update the lamp, the lampshade of which, over time, has lost its original view. After reviewing the relevant information and purchasing all necessary materials, can be done unique thing that will decorate the interior of your home.

Every housewife wants to make her house extraordinarily beautiful. Some arrange it in some unusual style, for example, provence, country or minimalism. Someone is trying to decorate with decorative elements. Others focus on one element, for example, a lampshade or a ceiling.

Consider the options for how to make a do-it-yourself ceiling lamp for a chandelier. To do this, you will need not some rare, but ordinary improvised means.

Option number 1: paper

The easiest way is to make an original paper lampshade. Such a decor element can have any shape. It will harmoniously fit almost any interior - in the kitchen, in the living room, in the nursery. It is worth remembering that the life of a paper lampshade for a lamp depends on the quality of the paper. It should not be too thin, but at the same time light-transmitting.

The easiest way is to consider how to make a lampshade with your own hands from the wallpaper left over from the repair. Consider how to make a product in the form of an accordion. The workflow does not take much time and does not require any special skills, abilities or schemes. From the wallpaper you can make a lampshade for a floor lamp with your own hands, for a table lamp or sconce:

First you need to prepare the material - a piece of wallpaper 1.5 m long and approximately 30 cm wide.
Mark the ribs with a pencil or pen.
Carefully form an accordion. The width of each rib should not exceed 3 cm.
Using a hole punch, make holes in the accordion.
Pass a decorative cord through the holes and glue the lampshade along the side seam.

Even a child can make such a product on their own.

In the process, instead of wallpaper, you can use rice paper. With it, you can update the old lampshade. Wrapped with such paper, it will look stylish and modern. You can decorate the product with the help of such decorative elements as special stamps, stickers, etc.

Do-it-yourself paper lampshades will decorate any interior in style. The main thing is to choose the right color scheme and form.

Option number 2: rope

A do-it-yourself lampshade made of rope will look original. It can be used to decorate any lamp: sconces, floor lamps and others.

First you need to prepare necessary tools and materials:

20 meters of rope;
1 balloon for the base;
PVA glue;
white paint (preferably in a spray can);
duct tape;
gloves (ordinary household or medical);
weaving device (special board or perfume box).

It is quite easy to make such a lampshade with your own hands:

Using a weaving board, make a decorative ribbon out of the rope. Its lines can be smooth or curved - as your fantasy tells you.
Now you need to glue the balloon filled with air with tape.
Taking the top of the ball as a reference point, lay the rope in smooth turns. At the same time lubricate it with glue.
Remove the cover from the lamp. Color it in White color. Put on a finished lampshade from above.
Paste the ball completely and grease with glue again.
Poke the ball with a needle and pull it out. After that, a form woven from a rope will remain.

A do-it-yourself twine, twine or rope lampshade is suitable for a table lamp, sconce or floor lamp. Under it, it is recommended to use an LED lamp, which will not heat up such a ceiling very much.

Option number 3: threads

Another option is a do-it-yourself lampshade made of threads. Self-made chandeliers from threads look very original. They attract attention and fit perfectly into any interior.

You will need:

balloon;
cotton threads of one or more colors;
250 ml of PVA glue;
suspension cord;
Powersave lamp;
scissors;
large needle;
oilcloth or plastic the size of an A3 sheet;
petrolatum;
tassel;
cotton pad and stick.

The process of making a lampshade for a table lamp, sconce, chandelier or floor lamp from threads with your own hands consists of several stages:

Blow up the ball. It is desirable that its size be from 25 cm.
Lubricate its surface with Vaseline.
Cover the work surface with paper or oilcloth.
Closer to the bottom of the tube with glue, pierce a hole.
Wrap the ball with threads in any order.
Lubricate the threads with glue. Leave to dry completely overnight.
By using cotton swab separate the balloon, deflate and pull it out.
In the upper part of the finished product, make a hole for the lamp and cartridge.
Insert the lamp inside. Fix the holder for the cartridge in the hole.

Now just hang the finished lampshade in the place intended for it.

Option number 4: lace

You can try to make a lampshade out of lace with your own hands. From this material you can make a lampshade for an old table lamp with your own hands, for a wall lamp or a floor lamp.

Work begins with the preparation of the things necessary for work. This is actually lace, PVA glue with a brush, a balloon and electrical elements for a lamp.

Stages of work:

The first stage is the preparation of lace. It is necessary to cut several circles of different sizes.
Blow up the ball. Lubricate its surface with glue.
Attach lace circles to the ball. It needs to be done with a twist.
Leave the product until completely dry. This will take about a day.
Pop the balloon and pull it out.
Fasten the socket, lamp and wires. It is recommended to use low power lamps that will not heat up the lace.

Option number 5: macrame

lovers original elements decor will undoubtedly pay attention to the macramé lampshade.

To make macrame lampshades with your own hands, you need to prepare:

172 m of 3 mm thick cord;
metal tubes and rings for the frame;
8 rings with a diameter of 7.5 cm;
1 ring with a diameter of 17 cm;
1 ring with a diameter of 36 cm.

How to make a frame for a lampshade with your own hands? We connect together two rings (17 and 36 cm in diameter) and 8 metal tubes 27 cm long.

The workflow for making the plafond itself looks something like this:

It is necessary to cut 40 threads of 3.5 m each from the cord. Attach them to the top ring.
Using patterns for macrame, weave an openwork mesh.
Insert 8 rings along the bottom edge, braiding them with a thread.
Also braid all the vertical tubes of the frame.
Decorate the bottom edge with decorative elements.

Before you make lampshades with your own hands, you can watch master classes. They will help you master the basic elements of macrame weaving and avoid mistakes in the workflow.

Option number 6: fabric

A fabric lampshade will also look great. With the help of fabric, you can update or restore an old product. It is enough just to cover it with prepared material and decorate it with any suitable elements decor. A fabric lampshade based on cardboard is suitable for a table lamp, sconce, infrared lamp, night light and even chandeliers.

To make the product neat, it is necessary, before being fitted, sheathed on sewing machine. In addition to it, you need to prepare:

iron;
pencil;
ruler;
textile;
pins;
matching color threads;
thick paper (thin cardboard or whatman paper);
universal glue.

The workflow consists of several steps:

Make a template of the desired shape out of paper. It is important that it fits the frame.
Connect the template to the fabric using pins. Circle it with a pencil. Draw another line 2 cm from the template line.
Wrap the allowances inward, gradually detaching the pins. Mark the fold line with them.
Remove template.
Sew the fabric on the machine.
Iron the fabric well.
In a well-ventilated area, lay out the workpiece and grease it with glue. Let dry a little.
Glue the fabric to the frame. All seams and cuts must be hidden.
Let the lampshade dry. You can use it after a day.

A fabric lampshade, decorated, for example, with flowers, buttons, bows, will look good. Instead of regular fabric, you can use organza.

Option number 7: wood

Separately, it is worth mentioning the lampshade in the steam room, sauna or in the bath with your own hands, because here high humidity, and the adhesive may no longer hold the shape of the product. For making with your own hands from improvised materials, wooden materials are most popular.

To make a wooden lampshade for a steam room with your own hands, you need to take:

paper;
pencil;
wood;
sandpaper for grinding;
self-tapping screws.

With this set of tools and materials, you can make a corner lampshade:

On paper, draw a template for the bottom of the frame. It should be in the shape of a trapezoid. It is important that its sides fit the walls of the bath.
Using a pencil, transfer the drawing to the prepared wood. Cut out.
Sand with sandpaper.
Cut out 3 strips with a width of 1 cm and a thickness of 0.5 cm. The height should be equal to the height of the lamp.
These strips will connect the top and bottom of the frame. They need to be nailed on the sides and in the center.
After measuring the distance from the center to the edges, cut a few more strips of the same size.
Fasten the planks with self-tapping screws inside lamp. You can fix them in any position.

As you can see, there are many options for making lampshades with your own hands. In addition to those listed, there are also products made of wire, knitted, lampshade made of beads and many others. In the process of work, almost any material that is at hand is used. If necessary, you can make a new product, or you can update the old one (do restoration). Almost always, a scheme or template is required to work. It is important that the workpiece exactly matches them. Only in this case ready product will become a real decoration of the house or apartment.

When there is a desire to change the situation in the apartment and add a little originality to it, start with the little things. Try to change the lampshade, and you will be surprised at the transformation of your family nest.

And if you manage to find an original model that differs from analogues, then the changes will impress not only you, but also your guests.

Is it true, unique lampshades they cost decent money, because you can’t get piece works of eminent masters for a penny.

But after all, no one bothers you to create your own unique masterpiece from cheap, and sometimes even waste materials, which will look much better than the samples presented in the store.

All you need is simple materials, a little patience and a flight of fancy, and we will tell you how to make a lampshade with your own hands.

materials

You can create a masterpiece from everything that you have at hand: fabric, paper, thread, twine, wire, plastic bottle, beads or beads.

In general, absolutely everything is suitable, even what you usually send in a garbage bag.

Don't believe? Just look at the photo of the lampshade.

frame

If you have a frame from an old lampshade, then this is just wonderful.

However, do not be upset if one is not found, because you can create a frame yourself from ordinary wire.

Copper, aluminum, steel - everything that you can independently combine into a single structure will do.

The metal frame of the classic lampshade consists of three rings and six jumpers between them. The small ring is a holder, which is connected by three jumpers to a ring of a larger diameter.

The same, in turn, is connected by jumpers to the last ring. The following photos will help you understand the design.

From fabric

When a lampshade frame is available, the easiest way to create your own masterpiece is to wrap the base with a cloth. For this you will need:

paper (newspaper);
scissors;
textile;
chalk or pencil;
threads.

Wrap the frame with newspaper in such a way as to form a pattern out of it. Then transfer the resulting shape to the fabric with chalk, adding 1 cm on each side to the seam.

Make a pattern, chop off the edges and sew the sides, forming a cover for the base of the future lampshade. We bend the upper and lower edges of the "cover" in such a way as to close the rings of the frame and fix it with a seam.

Note!

Voila, your lampshade for the floor lamp is almost ready. It remains to add a few highlights to your taste, giving it originality.

From threads

How to make a lampshade when there is no frame? As easy as pie.

Take a balloon without drawings, glue, thread, marker and start creating.

First you need to inflate the balloon and mark on it the upper and lower borders of your future masterpiece. Then take the threads and wrap them around the ball, trying not to protrude beyond the marked contours.

Apply glue diluted 1:1 with water to each layer of thread. When the density of the wound thread satisfies you, fix the cut edge and hang the ball to dry. After 3-4 hours, the threads will dry. Then pierce the ball and carefully detach it from the walls of the finished lampshade.

Leaves and flower petals woven between the layers of threads can give additional charm to a lampshade made of threads.
Note!

The ball, decorated with sparkling droplets of beads, also looks original. In general, watch and be inspired.

From paper

Ordinary sheets of office paper, glossy magazines, a cheap newspaper, an unnecessary book or an ordinary notebook, paper towel or a napkin - these are all future lampshades.

It doesn’t matter if there is a frame or not, the main thing is that there are scissors, glue and paper. A thousand and one versions of such lampshades can be described with the words “cut and stick”.

The main thing is not to forget a few simple rules:

paper lampshade is safest to use with economy light bulbs, which heat up significantly fewer lamps incandescent;
the diameter of the lampshade for lamps should be large so that the paper does not get too hot;
For bright room you can make a lampshade from thick paper, but for a dark one you need a thin, well-transmitting light;
be careful with color. For example, red or yellow paper will add warmth to the room, green and blue - cold.

Well, that's all. Charge with new ideas, arm yourself with improvised means and forward to easy changes that bring warmth and comfort to your home.

Note!

DIY lampshade photo

It happens that you really want to update the interior, but you don’t know where to start. Sometimes you just need to change the lighting. But buying a new lamp is expensive, and in some cases it is not even required. We invite you to consider a few master classes on how to update a table lampshade

What you need to create lampshades

You can update lampshades for your own hands with absolutely any materials:

fabric;
artificial flowers;
skin;
thread and rope;
paper and so on.

It is also a must to have tools such as scissors and a glue gun.

A simple and original way to decorate an old lamp

Such lamps are very well suited for a feminine interior in a chic style. To give the lampshade this look, take the following materials:

shade;
artificial flowers (flower stalks can be bought at craft stores, but you can buy bouquets and cut off hats from them, sometimes it turns out cheaper);
glue gun;
scissors.

Master class on how to update the lampshade for a table lamp with your own hands:

Cut off the excess parts of the stem from the flowers, leaving only the cup that connects the petals.
Heat up the glue gun.
Apply some hot glue to the cup of one flower spike and stick it to the lampshade. Start working from the top or bottom edge. Glue flowers either in a circle or in rows, pressing them tightly against each other.
Hot glue dries quickly, so work carefully.
When you have glued the entire lampshade, fluff the flower petals.

Advice: interesting lampshades for do-it-yourself table lamps are obtained by combining several shades of colors that flow smoothly.

Geographic lampshade

Such a lamp will look great both in the living room and in the child's room.

You will need:

shade;
map;
ribbon;
PVA glue;
some water;
tassel;
glue gun.

Master class on how to make geographical lampshades for table lamps with your own hands:

Prepare a map. You can buy it in a store, print it, or it can be special sheets for decoupage.
Mark the required width on the map and cut out the rectangle. If you do not have enough to completely wrap around the lampshade, then add another piece.
Dilute in a small amount of water.
Cover the map with reverse side glue and carefully stick it to the lampshade. Use your fingers to smooth out any bumps, if any.
Wait for the card to dry completely.
Cut off the excess paper.
Heat up and use it to glue the tape along the edge of the lampshade at the top and bottom.

The geographical lampshade is ready!

Book sheets as decor

In the same way, as in the previous mater-class, you can decorate lampshades for using book pages.

To do this, tear out a few pages from an old book and trim their edges so that they are not frayed. Lubricate each sheet with PVA glue and glue it on the lampshade in a chaotic manner. The paper should stick out a little at the edges. When all sheets are glued, tuck the protruding edges inward.

Warm lampshade with ombre effect

Such a lamp is ideal for the cold season, as it will bring a note of warmth and comfort to any interior.

List of what you need:

shade;
several types of yarn suitable friend to a friend by color palette(for example, white, dark blue and turquoise);
glue gun.

A master class on how to make a beautiful lampshade for a table lamp with your own hands:

Place a small bead of glue just above the base of the lampshade (about one centimeter from the edge).
Glue one end of the yarn to the drop. Choose the one with a darker shade.
Wrap the lampshade with yarn, making sure that each new row close to the previous one.
Wind a certain height with one color. The last turns should not fit snugly against each other, but be at different distances, cover the lampshade a little randomly (picture 1).
Glue a yarn of a different shade with a glue gun. The new color should be at the level of the old one (picture 2).
Wrap the yarn around the lampshade, and you will end up with two colors intersecting in some rows. This is necessary so that the shades have a smooth transition and do not come out with a striped pattern.
When you reel required level yarn of the second color, make a few loose turns (picture 3).
Wind the third color of yarn, remembering to glue the tip.
Finish wrapping the lampshade. To do this, the third yarn should go in tight rows to the edge of the lampshade, and glue the end (picture 4).
Turn the lampshade over and wind the yarn to the end.

The warm lampshade is ready!

Lampshade with roses

You will need to take the following tools and materials:

shade;
cardboard;
pieces of fabric;
green yarn;
ribbon;
glue gun;
scissors;
pencil.

A master class on how to decorate a lampshade for a table lamp with your own hands (a photo of the process is attached):

Draw flower leaves on cardboard, and then cut them out (picture 1).
Glue the green yarn to the edge with glue gun(picture 2).
Wrap the yarn tightly around the leaf (picture 3).
Glue the tip of the thread and make a few more leaves in the same way (picture 4).
Cut a few strips from the fabric about one to two centimeters thick (picture 4).
Fold one strip in half, dropping a little glue inside along the entire length (picture 5).
Twist the strip tightly, sometimes dripping glue on the edge to keep it from coming apart (pictures 6 and 7).
Straighten the edges of the figure a little, and you will get a rose (picture 8).
Make several roses in the same way, different in size.
Carefully glue the roses on the lampshade (picture 9).
Do not forget to glue the leaves under the roses in some places.

Volumetric lampshade is ready!

New lampshade with ombre effect

To make a smooth and beautiful transition from one color to another, you need a suitable coating. To do this, it is recommended to make a lampshade with your own hands.
You will need:

lampshade frame;
cotton plain fabric (preferably white, beige or light gray);
small bath or basin;
paint (watercolor, for hair, for fabric, gouache and any other liquid);
glue gun.

A master class on how to make a lampshade for a table lamp with your own hands with an ombre effect:

Take the lampshade frame and fabric.
Turn on the glue gun.
Wrap fabric around the lampshade and carefully glue the edges together. Cut off the excess fabric.
Wrap the top and bottom edges inside the lampshade and glue them with a glue gun.
Fill a basin or bath halfway with water and dilute the paint in it.
Lower the lampshade not completely into the bath and pull it out.
Do this procedure several times, gradually reducing the dipping height. Thus, the paint will be more absorbed at different levels, creating a smooth transition of shades of the same color.
Hang the lampshade in the bathroom and let it dry.

All is ready!

How to make a lampshade from scratch

The previous master class told how to update a boring or outdated lampshade. And what to do if there is nothing to work with and there is not even a frame? Then you can easily make a lampshade with your own hands.

For this you need to take:

textile;
masking tape;
large ruler and centimeter;
pencil;
scissors;
plastic sheet(can be found in construction stores or among goods for needlework);
wire rings;
large clips-clothespins;
PVA glue or;
glue gun;
special splitter for lamps (sold in lighting stores).

Operating procedure

A master class on how to make a new lampshade for a table lamp with your own hands:

Take a tape measure and measure the diameter of your wire rings. This will be the diameter of the lampshade.
Put a plastic sheet on the table and measure the length and width of the future lampshade on it
Cut out the marked rectangle.
Turn the fabric inside out on the table.
Pin the edges of the fabric so it doesn't move.
Cover the plastic rectangle with a layer of PVA glue or double-sided tape.
Gently place the rectangle with the sticky side on the fabric.
Press the fabric against the sheet and smooth it out.
Cut off excess fabric.
Roll the canvas.
Glue the canvas with a glue gun.
Connect the seam with clothespins and place the part on the table.
Put a weight on top of the seam so that it does not stick out.
Wait for the part to dry.
Place inside the parts from above and below along the ring.
Attach a special splitter to the upper ring.
Glue the rings with a glue gun.
Attach paper clips to the edges so that the rings stick better. Leave it like that for a while.
Glue a ribbon to the top and bottom of the lampshade, wrap half of it inward.
Cut a strip of fabric, fold the edges over and glue to the seam.
Cut two more strips of fabric, also turn the edges and glue them to the top and bottom of the lampshade.
Wait until all items are dry.

A brand new lampshade is ready!

Categories

Popular