How to make a mousetrap with your own hands at home: effective devices, useful tips. Do-it-yourself reusable mousetrap Drawing of a mousetrap house

Kirill Sysoev

Calloused hands do not know boredom!

Content

Small animals become a disaster for owners of gardens and cottages, and often residents of private houses suffer from their invasion. Spoiled crops and products are not the main problem. Rodents as carriers of serious diseases can infect humans with them. It is not difficult to make homemade mousetraps from improvised materials.

DIY mousetrap - advantages

It is easy to buy a device for catching mice, only a factory mechanism with a metal spring is not humane, especially if a child sees the bloody result of the work. The disadvantage of such a mousetrap and the high cost. Poisoning rodents with chemicals is dangerous if there are other animals at home. In such a situation, it is more convenient to make a trap for mice with your own hands.

Homemade designs are much cheaper. They are made from any materials that every home has and it is not a pity to throw it away, which saves money. Advantages of a do-it-yourself mousetrap:

ease of execution;
the design does not deprive the mouse of life, but limits freedom;
does not take much time to manufacture;
mice are not familiar with the new device, do not know how to avoid danger;
in the event of a breakdown, another trap is quickly made;
safety for children and pets;
work allows you to demonstrate your skills to loved ones.

Types of mousetraps

You can make reusable homemade mousetraps with your own hands, which are constructed from a glass jar, plastic bottles. The animal will remain alive, the mouse can be released into the street or into the forest, the trap can be used again. Disposable mousetraps are made from a glass bottle with a wide neck, where the animal enters and cannot get out. To release the mouse, the trap must be broken.

You can make different types of mousetraps with your hands:

using plastic bottles;
a design of a bucket of water where the mouse can fall;
cardboard trap with specially applied sticky glue for rodents;
mousetrap from a bottle or glass jar;
a slamming design of a pan, a vessel of a suitable volume;
wooden or metal device;
a mousetrap-chasm, where the animal falls from a height into a bucket;
electronic trap.

How the mousetrap works

Do-it-yourself traps for rodents have different device schemes. How does a mousetrap work? The action of the trap is based on the principle:

displacement of the center of gravity - a bucket of water;
slamming - a glass jar, a box of cake;
spring actuation - wooden construction;
sticking to a lubricated surface;
changes in circuit resistance - electronic mousetrap;
inability to get out of a high capacity - a jar with a paper lid;
stuck in a plastic bottle with sharp petals.

Mouse bait in a mousetrap

You can lure the animal into a do-it-yourself trap by putting a bait in a mousetrap. There is a persistent misconception that mice love cheese. Numerous experiences have led to the conclusion that this product is not considered their priority. It should be noted that rodents love fresh and high-quality food, they will pass by a mousetrap if they doubt that the products are harmless. It is necessary to lubricate the device with oil or alcohol to beat off the smell of a person.

It is preferable to choose products with a strong aroma, soak them in sunflower or sesame oil. The best bait for mice in a mousetrap:

smoked or salted bacon - can be fried on a match;
sunflower oil, preferably unrefined;
a piece of fragrant bread, preferably fresh;
sunflower seeds;
slices of pizza;
seeds of buckwheat, wheat, rice;
smoked sausage;
nuts;
fresh or boiled meat.

How to make a mousetrap

To make a trap for mice with your own hands, you must first decide on the design, select the necessary materials. You can make a mousetrap using:

unnecessary bucket or container;
plastic bottle;
glass jar;
plastic and paper;
a cake box with cotton swabs and soap for cargo;
wooden bars;
cell and electronic circuit.

DIY mousetrap from a plastic bottle

Craftsmen work wonders from this household item. The mousetrap from a plastic bottle was no exception, which is easy to make with your own hands. The mouse, getting there, cannot get out, it will stay there until it is thrown out. One of the manufacturing options:

take a bottle;
separate half from it;
on the part where the bottom is, make cuts with scissors about 2 cm long, equal to 1/2 of the diameter of the circle;
sharpen each petal;
bend inside the bottle;
put bait on the bottom;
the mouse will go inside, and the sharp teeth of the petals will prevent it from coming out.

A do-it-yourself mousetrap from a plastic bottle is performed in another way according to the following step-by-step instructions:

cut the container in half;
shorten the neck so that the mouse can easily pass through it;
lubricate the inside with oil;
put bait on the bottom;
insert the upper part inside the lower neck down;
the mouse rushes for food, falls into the bottle, but cannot get out.

There is another effective option for quick do-it-yourself manufacturing - a mousetrap that works without misfires:

cut off the end of the bottle at the narrowing point;
make a hole, tie a rope to it;
lay the bait inside;
place the bottle on the edge of the table surface - most should hang down;
tie the free end of the rope or glue it with adhesive tape so that at the moment of falling the container does not reach the floor;
the mouse, penetrating inside, moves the center of gravity;
the bottle hangs with the rodent.

Mousetrap from a bucket of water

An old bucket can be used as a mouse trap. To implement the idea, you need:

drill 2 holes on top;
pass a metal rod horizontally through them;
put on it an empty bottle with a lid, lubricated with oil - the container should rotate freely around the axis;
move the neck of the container to the edge of the bucket;
the mouse, smelling the smell, will climb to the bottle;
it will turn, and the animal will fall into the water.

You can consider another option for using a bucket for making traps with your own hands, liquid is poured into a third of the volume. A mousetrap from a bucket of water is done like this:

on top of the container, not far from the edge, a knitting needle is horizontally fastened with insulating tape;
a ruler or rail is glued to it at an angle of 90 degrees, which at one end rests on the edge of the bucket, and the other hangs freely;
bait is placed on it;
a bar is placed on the side of the bucket at an angle;
the mouse climbs on it to the bait;
the free end of the ruler overturns under the weight;
the trap works.

A very easy to make do-it-yourself disposable mousetrap, made from a house-shaped calendar. In this situation, the bucket is placed on the floor near the edge of the table. The mousetrap is made according to the principle of shifting the center of gravity:

the calendar is installed on the plane of the tabletop so that the edge extends halfway beyond the end;
delicious food is placed at the far end;
the mouse goes to the bait;
the house topples with her into the bucket.

Wooden do-it-yourself mousetrap

For those who are unable to regularly come to the country to check if someone is trapped or not, you can make a multi-seat structure. In this case, a do-it-yourself mousetrap made of wood is performed immediately to catch several rodents, for example, six. For manufacturing you will need:

wooden block 4x10 cm, 40 cm long;
bicycle knitting needles - 6 pieces;
thin wire;
strong thread.

The process of building a mousetrap is as follows:

at the end of the bar, drill holes with a diameter of 2 cm and a depth of 1 cm - these are minks;
step back from the edge on the same side 10 mm;
make a longitudinal cut to the bottom of the holes;
shift the line from it by 2 cm;
drill two holes with a diameter of 2 mm perpendicular to the mink;
use the same drill to perform another one on the same plane, closer to the other edge;
roll the spring from the knitting needle;
fasten a loop of wire at the end.

Collect a mousetrap with the following sequence:

insert the free end of the spring into the hole on the plane;
hide the loop in the cut to match the contour of the mink;
pass the thread through 2 small holes, fix the spring;
put the bait deep into the mink;
the mouse, wanting to have a tidbit, gnaws the threads;
the spring works, only the tail sticks out of the mink, which does not frighten other animals that fall into neighboring holes.

Mousetrap from a jar

A very simple option for making a do-it-yourself trap from a glass jar, which must first be rinsed well. For the production of a mousetrap:

make a paper cover on top;
fix with masking tape or twine;
make two perpendicular cuts with a sharp knife;
the bait is hung over the jar;
the mouse will want to eat it, stand on the paper and fall through.

A mousetrap from a can can be made in another way, which requires a coin. An important condition is that a large diameter is needed, for example, 5 rubles. For the convenience of subsequent removal of the mouse, the entire structure must be placed on a base - a sheet of cardboard. The mousetrap is done like this:

a piece of bacon is attached to double-sided tape;
fixed on the back wall from the inside;
the opposite end rises;
under it, as a support, a coin is placed on the edge;
the mouse, trying to eat the bait, touches the jar;
the coin falls, the mousetrap slams shut;
the animal cannot get out.

DIY electronic mousetrap

For those who understand electronics, it will not be difficult to make a mousetrap according to the scheme shown in the photo. The design consists of a cage, on one side of which a slide gate is installed on vertical skids. On the device at the top, near the entrance, there is an electromagnet, in which the anchor is spring-loaded towards the gate, and the tip is pointed. 2 holes are drilled on the damper opposite the anchor;

when the gate is fully raised, the tip falls into the lower hole;
when lowered, due to the spring, it enters the upper one.

A do-it-yourself electronic mousetrap can be made by a keen person. A pointed electrode is provided in the far corner of the structure. Delicious bait is planted on it. The electrode and magnet are connected to the electronic circuit. The mousetrap works like this:

the gate rises to the upper position, where it is automatically fixed by a spring;
the mouse enters the cage;
hits the bait.

when you touch the mouse to the bait, the resistance in the circuit quickly changes;
an electromagnet is connected to a storage capacitor;
the gate is lowered, closing the entrance;
the anchor of the electromagnet fixes the damper at the bottom;
an audible alarm is turned on, warning the owner of the appearance of an unexpected guest in the cage.

In private homes, mice are a real scourge for owners. To help get rid of uninvited "guests" will help a trap for mice. In search of food and warmth, these rodents climb into outbuildings, cellars and, directly, the kitchens of houses. Here they quickly put things in order, gnawing through bags and containers with food, rodents not only eat, but spoil cereals, root crops, etc., scattering them and soiling them with their excrement. In addition, all nearby products that are not sealed in sealed containers, as well as nearby things, are saturated with an indestructible mouse smell. Therefore, the destruction of mice in the house is a vital necessity.

We fight with mice in the country on our own

The use of poisoned baits against mice in houses and apartments is undesirable, firstly because children and pets can suffer, and secondly, a poisoned animal can die in a mink inside a wall or under the floor, after which it will feel extremely bad in the room for a very long time. the unpleasant smell of decaying corpses. Therefore, it is best to deal with rodents with the help of traps. Conventionally, they can be divided into two types:

Humane - in which the caught animals remain alive;
Destructive actions - in which rodents have no chance of surviving.

The shops offer various types of mousetraps, but they are not always cheap, and the shops themselves are far from always located nearby. But you can easily make do-it-yourself mouse traps from improvised materials. This will not require a lot of time and effort.

Pot trap

A long-known and very simple trap can be made from an inverted cup, an old saucepan, a large tin can or other container. A rod (a piece of thick wire, a smooth twig or a wooden stick) is fixed across the saucepan closer to the bottom along the diameter. The edge of the saucepan is lifted and supported by a washer installed on the edge (with a large button or coin), to which a strong thread with a wire hook is tied or glued. Previously, the thread is thrown through the rod inside the container and the bait is hung on the hook. Empirically, the length of the thread is selected so that the bait hangs 2-4 cm from the surface. A piece of salted or smoked bacon, a crust of bread is used as bait. The mouse, which has climbed up to feast, pulls the bait, the support slips out from under the edge of the container, and the animal is trapped. In order to remove the caught mice, a piece of plastic or plywood is slipped under the trap, creating a kind of floor, then the mousetrap is taken out away from the house, where the rodents are released into the wild. When manufacturing, it should be taken into account that the container for the mousetrap must be heavy enough so that the mouse cannot turn it over and get out.

You can make the same trap much easier: simply attach the bait inside to the side wall of the container with tape at a height of 4-5 cm from the edge. A mouse that has climbed inside will try to get to the bait, shake the container and the support will fall.

Bottle mouse trap

In just five minutes, you can make a trap from an empty plastic bottle. A hole 2-3 cm in size is cut out in the bottle next to the neck. A strong cord is tied to the neck, the other end of which is attached to a heavy object on the table so that the bottle, hanging from the table, does not reach the floor. The bait is placed in the bottle closer to the bottom (fried seeds, cake, bread crusts, millet, lard and any other that attracts mice). It remains to put the bottle on the edge so that the upper part with the slot lies on the surface of the table, and the lower part extends beyond its edge. When the mouse, having coveted the bait, climbs into the bottle closer to the bottom, it will knock the trap off the table and the bottle will hang on a string. The animal will remain inside and will not be able to get out of it.

Trap "Abyss"

According to a similar principle, a trap is assembled, which is arranged from any container (jar, high saucepan, plastic bucket), on the edge of which it is necessary to make a kind of ramp from a plank or cardboard. It remains to lay a piece of cardboard, plywood or a regular ruler, so that the edge hangs over the container. The bait is placed on this edge. The mouse, approaching the bait, falls into the container below.

Unlike the previous ones, glue traps do not require much space. They can be placed in secluded places, cracks, inside cabinets. You can purchase a ready-made glue trap, or you can buy special glue from rodents and make mousetraps of convenient sizes and in the right quantities yourself. To make traps, glue is poured in a thin layer into shallow trays, low jars or flat boards and pieces of plastic. For the best effect, bait can be placed in the center of the traps. Attracted by the smell, the mice step on the glue and stick. To free the animals, a little sunflower oil is poured onto the surface of the glue, and after a while they themselves get out of the trap.

Spring mousetraps are available in sufficient quantities in stores. The manufacture of such structures requires special materials (springs, steel wire), tools, certain skills and a lot of time. Most of these traps are designed to kill mice. The exception is trap cells.

The appearance of mice in photographs and cartoons is tender. However, when gray tailed creatures enter the house, outbuildings, garages, the attitude towards them changes dramatically. After all, rodents cause not only material damage, which is calculated as damage to products, building materials, and electrical wiring. , helminths, which entails serious consequences for human health. Therefore, when rodents are found in their possessions, the issue of combating them is beyond doubt. How to make a mousetrap with your own hands and why this method is used most often - the answers to these questions will be useful to beginner mouse fighters.

Advantages of mousetraps

The fastest way to get rid of rodents at home is the use of rodenticides, that is, poisons. But this method has a number of significant drawbacks. In addition to the fact that their use is dangerous when small children or pets live in the house, the death of a rodent can occur in the most unexpected place. A decomposing body will exude a disgusting putrid smell for a long time, which is very difficult to get rid of. Yes, and the search for the carcass of the animal itself can end with a major overhaul of the premises. When using traps, these problems can be avoided.

And this is by no means all the advantages of mousetraps:

Even a schoolboy or a fair sex can make traps for mice with their own hands. After all, most designs in the manufacture do not imply soldering skills, technical knowledge or professional possession of a hammer and other tools.
Homemade mousetraps are in no way inferior to industrial options in terms of efficiency.
The cost of devices made by hand can be several times lower than purchased traps, since most of them are made from improvised means.

Varieties of traps

All mousetrap designs are a device, in the center of which is located, attracting tailed pests with its aroma. Depending on the type of device, the mouse either dies or continues to exist in anticipation of its fate. Types of mousetraps that you can make yourself:

spring, made of wood and metal knitting needles, act when the spring is triggered;
a variety of containers, ranging from all kinds of jars to a bucket or pan - the effect is achieved by shifting the center of gravity or a banal drop of the mouse from a height;
live traps - an automatic trap designed by Tishleev, a Zünner trap are more complex structures for self-manufacturing, can be either single or designed to catch several individuals at once;
glue traps - a modern version of live traps, they are compact and easy to manufacture and further use, trapping of living creatures is carried out by gluing a rodent to;
electronic traps powered by a network or other power sources - a bait is placed inside the module, and as soon as the rodent is inside, a powerful electric discharge is released, from which the mouse instantly dies.

The photos of the mousetraps below will help you assess the complexity of the design.

What to do with a caught rodent

Often the question arises, what to do with the mouse caught. If the animal remains intact and unmutilated, the most humane thing would be to take the captive to its natural habitat. In the case when he has damage, it is advisable to feed him to cats or take him to a garbage dump. Particularly compassionate persons before disposal can first put the mouse to sleep in an apartment or house, for example, by feeding it with poison. If a decision is made to leave the gray pest as a pet, it should be taken for examination to a veterinary clinic, and only after the conclusion that it is healthy, equip a new home for it.

Whatever manipulations are done with the captured animal, it is necessary to do it with gloves, since the possibility cannot be ruled out that the mouse is a carrier of various diseases or simply be rabid. The room in which she was, is subject to thorough disinfection.

The forums also offer more creative options for solving the fate of a captive animal: feed and eat, flush down the toilet, hook up with the mother-in-law.

How to make a bottle trap

What the fantasy of craftsmen does not reach when it comes to plastic containers for liquid products. Not without them and catching rodents. A plastic bottle trap is made in just a few minutes. You can make it from a poltorashka or a container of 2 liters. In the absence of the latter, mouse traps are constructed from a 5-liter bottle. Traps can be made in several ways.

Option number 1

The walkthrough looks like this:

Using a clerical knife, cut off the neck of a plastic vessel, approximately a third.
Lubricate the cut neck from the inside with any vegetable oil.
Put the bait inside the remaining part with the bottom.
Turn the element with a neck so that it is directed down the structure and secure it with tape or wire.

The mouse, tempted by the aroma of the bait, freely penetrates through the greased neck into the trap, but will not be able to get back. On the part of the neck where the cork is screwed, several fan-shaped vertical cuts can be made. This will increase the chances of catching a large rodent.

On a note!
So that the mousetrap from a plastic bottle does not turn over, a weighting agent is placed on the bottom: stones, a small bag of sand.

Option number 2

Catching a mouse in a bottle is even easier:

Cut off the top of the container where the constriction ends.
On the upper edge of the element with a bottom, make cuts 4-5 cm long with an interval of 1.5-2 cm. You will get a semblance of petals that need to be sharpened.
Bend the pointed edges down so that they look at the bottom.
Lubricate the walls of the trap with fat and put the bait on the bottom.

For the convenience of the mouse, small boards are attached to the device. The animal will climb them without interference, fall into the vessel, and sharp edges and slippery walls will not allow it to leave.

On a note!
A primitive trap is easy to make if you put the bait in a bottle of oil after using the product and slightly cut off the neck and bend it down.

Option number 3

This type of trap is somewhat different from the previous ones:

Cut off the neck of the bottle and throw it away. This part is no longer needed.
In the resulting container, it is necessary to drill two holes and stretch a rope or wire through them, through which the mousetrap will be tied.
Place the bait at the bottom and position the trap so that part of it hangs from a shelf or countertop. Fix fastening.

As soon as the mouse climbs for a treat, the center of gravity will shift, and the mousetrap will invariably hang with the captive. Catching pests with bottles is quite convenient. Consumables for their manufacture cost nothing, and captured animals can be disposed of along with the trap, which avoids direct contact with them.

Traps from large containers

A mousetrap from a bucket of water is a disgracefully simple, but very effective device. With its help, it is possible to catch several representatives of the mouse family in one night. Mousetrap manufacturing process:

Drill two holes in the top of the bucket.
Take a metal rod, the length of which is not less than the diameter of the bucket.
Put an empty bottle on the axis, after coating it with a mixture that is attractive to rodents, so that it can rotate.
Fix the rod with the strung bottle in the drilled holes. The neck should be as close as possible to the edge of the bucket.
Fill a third of the bucket with plain water.
Attach a kind of ramp from a plank to the trap, along which the mouse will climb for the bait.

Feeling the aroma, the tailed animal will climb along the bridge to the bottle, which, under its weight, will immediately turn over and drop into the water. Instead of a bucket, a deep basin or a large saucepan can be used.

The device is designed to catch several individuals at once. The construction process consists of several stages:

Take a wooden beam about 40 cm long. Drill 6 holes on the end part with a diameter of 2-2.5 cm and a depth of at least 1-2 cm. These will be holes for potential captives.
At a distance of 1 cm from the same side, cut the bar lengthwise to the bottom of the notches.
Drill 2 more holes perpendicular to the minks, into which the springs will then be attached.
Build a spring mechanism from the knitting needle, make a loop of strong thin wire at the end.
Insert the free edge of the spring into the previously prepared hole, fix it on the bar, hide the loop in the cut.
Pass the thread through the free holes.
Put the bait in the center.

The mouse will try to get to the treat and gnaw through the thread, as a result of which the spring mechanism will work, and the rodent will be in the hole prepared for it.

Adhesive structures

For the manufacture of a mousetrap, you will need small cardboard squares, sheets, each side of at least 5 cm. Construction residues can be used for the base - drywall, MDF panels, fiberboard, chipboard. The second necessary component is glue. You can cook it with your own hands according to the following recipe: mix rosin, petroleum jelly, pine resin and bituminous pitch. If you do not want to prepare the adhesive mass yourself, then the simplest way is to purchase special glue for rodents in a specialized department.

Further construction of the trap is outrageously simple. Glue is applied pointwise to the workpiece. In the center is a fragrant bait. The mouse is firmly fixed to the adhesive mass. The only drawback of such structures is the heart-rending squeak of the caught pest.

To or, often use a mousetrap house. A cardboard frame is being made. The inner walls are covered and in the middle - a traditional delicacy for mice. This design eliminates the risk of moving an animal smeared with glue around the room.

Electronic devices

Do-it-yourself electronic mousetrap can be made according to several schemes. For people with a technical background and knowledge of the laws of physics, making such a device will not be difficult. The simplest trap is a small device, in the center of which a fragrant treat is placed. When a mouse gets inside, the resistance of the circuit changes, as a result of which the damper closes and an audible signal is given to warn of the capture of the pest.

In spring and autumn, residents of houses and apartments are faced with a problem that is as old as the world - the invasion of mice. They have always caused trouble for people, especially those who have stocks of grain, etc. To fight mice, there are many means and traps that can not always be called humane.

Although they are pests, not everyone can just kill this animal. There are many ways in which you can get rid of uninvited guests in a humane way. Moreover, such methods of struggle do not require you to invest money and effort. We are talking about making a mousetrap from plastic bottles.

Everyone has such a container, so a mousetrap made will cost a penny. Let's find out the advantages of manufacturing these structures and the technology itself.

What is the advantage of a bottle mousetrap

Most traditional mousetraps are quite dangerous if there are children and pets in the house. After all, they can fall into a mousetrap and damage their body parts, and poisons that resemble seeds can attract them. As a result, poisoning and abrasions. In addition, buying a lot of traps for a huge family of rodents is quite expensive.

A plastic bottle mousetrap is good because it will not harm anyone. Children and animals can be calm. And the fact that the creation will require completely simple materials speaks in favor of home-made designs. You will not need much time for manufacturing, since the design is quite simple. Due to its design, the mousetrap is very humane and after catching a rodent, it can simply be released away from home.

Note! Homemade mousetraps are reusable. With one such design, you can catch many mice. It is enough to install it in the right place.

An important component is bait

If you want your mouse trap to be successful, bait is a must. It can be even the most high-tech, however, without a bait, the likelihood of a mouse entering the trap is minimal. Mice are not stupid creatures and will not climb anywhere for fun. Therefore, before considering how to make a mousetrap, you need to figure out the bait for it.

What do mice just love? Cheese? Not really. Undoubtedly, they love him, but this is just a banal stereotype that advertising and television dictate to us. Mice respond much better to sunflower seeds, which are not only tasty, but also smell good. Mice look for food by smell, so smell is important. For greater effectiveness, you can lightly fry them in sunflower oil. In addition, rodents do not disdain bread, which can also be moistened in oil for fragrantness. And to make sure pests go into the mousetrap, take sesame oil. It has a great option.

Advice! You can also use lard, crackers or popcorn.

When you have the right mouse bait in your arsenal, you can start making a trap out of plastic bottles.

Mousetrap from a bottle - option 1

For this simple design, you will need a minimal list of materials. It can be done in 10 minutes. You will need:

2 l plastic bottle;
wire;
stationery knife.

That's all. In the photo you can see what the finished structure looks like.

So, all you need to do is make one cut and connect the two parts of the bottle. Just? Absolutely. Visually split the bottle in half, identifying the half. The part where the neck is located, visually divide in half again and make a mark. It turns out that you divided the bottle into 2/3. On the mark, using a clerical knife, cut off the top.

You got two elements from a plastic bottle, one is shorter, the other is longer. It remains quite a bit, to collect a mousetrap. It is enough to insert the smaller part into the larger one, neck down. And to fix it, you can use a stapler, wire or glue. The mousetrap from the bottle is ready. It remains to make it effective.

There are two steps for this:

Lubricate the neck walls with oil. Not only will it be slippery, but it will also attract mice.
Sprinkle seeds or bread crumbs on the bottom.

The mouse will easily fall into the bottle, but will not be able to get out.

Advice! Since the plastic bottle is a light product, the structure may fall and the mouse will come out. To prevent this from happening, strengthen it or simply glue it to a wooden block.

Mousetrap from a bottle - option 2

The second way is not much harder. Even vice versa. The work needs all the same plastic bottle and stationery knife. That's all. The creation technology is as follows:

That's it, the trap is ready. It remains only to place the bait inside. The principle of operation is simple: the mouse will climb inside without problems, but it will not be able to get back, due to the design. As you can see, these are simple options for which you do not need to be an engineer. And in such a mousetrap many rodents can fit.

Mousetrap from a bottle - option 3

This method is already more complicated than the previous ones, but in general it is simpler than simple. Here is what it looks like when finished.

This is where balancing plays an important role. All that is required is to cut off the neck of the bottle. All. Next is the matter of technology. In its upper part, as shown in the figure, make a small hole and tie a rope. The length of the rope should be such that, having fallen from the table, the bottle is 5 cm above the floor. One end is tied to a bottle, and the other can be fixed to a shelf, a pipe at a table, etc.

So, being the owner of a private house (in which I live only in the summer) and a house in a summer cottage (which I rarely visit), I ran into one problem: MICE! In the summer, this is not so scary, but, with the onset of cold weather, the problem becomes relevant - mice tend to heat and climb into houses. Of course, a great variety of mousetraps are sold in stores. And I bought and installed them. But after all, they have one common drawback - they catch one mouse! What if I'm not in the house every month? How many mousetraps can I install? ... You can, of course, a lot! But here, then, be sure to accidentally climb into them! After all, they are placed in "secluded places", or, a cat or a dog will do it!

So I made a homemade mousetrap (and more than one), which has the following properties: it can catch several mice, and it is absolutely safe for everyone who is not a rodent, and does not fit in a two-centimeter mink.)))

Today I made another such mousetrap and took a photo of the process. I made it for six mice, so we will consider just such an option.

So, we need:
1) Bar. (Any unnecessary one will do. The cross section is from 40 to 100 mm, to infinity ... Well, within reasonable limits. I do not advise making it from a sleeper))))) Length - about 6 centimeters for each "mouse place" - in my case - about forty centimeters)
2) Old bicycle spokes. (Again, one for each mouse - 6 in my case)
3) Thin knitting wire (I took 0.8)
4) Strong thread.

To begin with, at the end of our bar, we drill "blind" holes, with a diameter of 20 mm, and a depth of 8-10 cm. (The bar should be two centimeters wider). (These will be "minks" for mice). I did this using an adjustable drill bit for wood and a regular drill.

After that, we need to cut along the entire bar, stepping back about a centimeter from the edge where we drilled blind holes. The depth of cut should reach the bottom edge of our holes. I completed it with the help of a circle on a tree and the 125th small grinder (angle grinder). It can be done with a circular saw (circular), or even a hand saw. But in this case, you will not be able to make a mousetrap for more than 3 minks - the length of the hacksaw blade is not enough.

The next step - at a distance of about two to two and a half centimeters from our cut, we drill two holes across the beam, 2 mm in diameter. They must pass across each mink, dividing it into equal parts. For clarity, I inserted a wire into the drilled holes:

With the same drill, we drill a hole in the bar where the mink has already ended. We get this product:

Let's start assembling. We insert the springs into the hole we drilled opposite each mink:

After that, at the end of each spring we fix a loop of knitting wire:

And we charge the mousetrap: Compressing the spring so that the wire loop falls into our cut, we fix it by inserting something of a suitable diameter. I used the same file:

After that, we simply tie the spring with a thread passed through our two holes. I use a "gypsy" needle to make it easier to thread:

After that, remove the file and place the bait in the end of the mink. Better smelly. I used pieces of lard skin fried to a crust. (This can be done at the beginning. Even more convenient - the threads do not interfere)

Similarly, we charge all the minks:

What we have: a wire loop, which is larger than the mink in diameter, completely hides in the cut and does not overlap the mink. A mouse, seeing a hole, will naturally try to explore it. What’s more, it smells delicious! Having passed the loop, she will run into the threads blocking her passage ... and simply gnaw through them !! (Do not hesitate, checked.) Further - it is clear. The released spring will immediately jerk the wire loop up ... That's it !!! Not a single one has reached the bait yet))))) At the same time, the tail of the mouse sticking out of the mink does not scare away others! The rest of the minks are free! Upon arrival at the dacha, I sometimes shake out, pressing the springs, 10 mice each! All you need is a new thread. The bait lasts a long time.

Categories

Popular