How much does a regular mattress weigh. How much does a cotton mattress weigh? Selection of a mattress according to the permissible load on a berth

There are many recommendations for choosing a mattress based on weight, and most of them are partially correct. But if you choose a product only by weight, then the load on the occupied area will not be taken into account. Those. the load on the base of the mattress of a person of short stature and high of the same weight will be different. Therefore, the most correct selection possible, taking into account the body mass index (in the table, BMI is indicated).

The table below shows in an accessible way recommendations for choosing the firmness of a mattress depending on body weight.

Choosing a mattress for people weighing up to 60-65 kg

With a height of up to 160 cm, a medium or below average firmness of the mattress will suit you. If the height is more than 160 cm - choose stiffness or. As a basis, a Bonnel type block may be suitable, with a density of no more than 250-350 springs per square meter. m, or depending on the budget.

Choosing a mattress for people weighing 70 - 75 kg

With growth up to 155, choose the level of rigidity medium or above average. With growth from 175 - below average. special kind spring block, like or "Hourglass" is not required.

Choosing a mattress for people weighing 80 - 85 kg

With a height of up to 160 cm, mattresses of high and above average hardness are suitable for you. With growth from 175 cm - medium hardness. And over 185 cm - soft.

Choosing a mattress for people weighing 90 - 95kg.

With a height of 155-165 cm, choose a hard mattress. If your height is 170-175 cm, then the stiffness level "" is suitable, and with a height of more than 180 cm - "".

The choice of the basis of the mattress with a weight of more than 110 kg

When loaded on sleeping area more than 110 kilograms, it is advisable to choose spring blocks with independent springs. They have an excellent orthopedic effect due to the ability to most accurately repeat the contours. human body and to distribute the weight as much as possible over the entire surface of the product. In addition, various modifications can withstand loads up to or more, and also have excellent endurance and durability.

Selection of a mattress according to the permissible load on a berth

The online store "Matraster" has prepared for you an easy way to select a product according to permissible load to a sleeping place. It is enough to specify the weight in the "Load" filter and immediately in front of you will be displayed all suitable models mattresses.

The weight of the mattress depends on what size it is and what materials it is made of.

When choosing a mattress model, there are many practical issues: how to choose, is a guarantee provided and for how long, is delivery possible. If you have to carry out delivery to the house yourself, then it is important to know how much the mattress weighs.

The average weight of 1 square meter of a spring mattress is 10-13kg, for springless models this parameter is 15-18kg. Mattress square meter vacuum packed is about 6 kg.

Thus, knowing the right dimensions mattress, you can easily calculate its weight. Popular double models measuring 160x200 cm, for example, weigh in the range of 30-40 kg, 90x190 cm in size - about 20 kg.

Vacuum-packed mattresses of the same size are almost twice as light. Before buying a mattress - be sure to check the weight of the product with our specialists.

How to choose the right mattress for the bed

Before buying a mattress, you need to know the exact size of the inner perimeter of the bed for which it is selected. It makes no sense to measure an old mattress, as it could deform and cake during operation. If the bed has standard dimensions (an error of 1 cm is allowed), then the mattress must also be selected from a number of standard dimensional grids. If there are deviations of 2-3 cm or more, then rounding up or down is unacceptable. Then the mattress must be ordered exactly in size. required comfort and long term The operation of the mattress is guaranteed if the entry of the mattress into the recess of the bed is tight (no reserves!).

The height of this bedding depends on the preferences of the owner. But there is one rule - any orthopedic model, at least a little, but should be higher than the side of the bed.

A mattress is an indispensable element of every bedroom. It has an exceptional and very important function - ensuring a healthy and full sleep, a comfortable night's pastime and supporting the spine during sleep. Choosing a mattress for a bedroom is a difficult task, but quite solvable. It remains only to understand the types of beds, sizes and features that will make sleep as healthy as possible.

What sizes are there?

The dimensions of the mattress have the same hierarchy as the size of the bed. No wonder the products must exactly match each other in centimeters.

Standard dimensions of a double mattress:

• 160 x 200 cm;
• 160 x 190 cm;
• 180 x 200 cm;
• 180 x 190 cm;
• 200 x 200 cm.

Single children's models are usually available in sizes 120 - 140 - 190 - 200 cm long and 60 to 120 cm wide, for example, 60 x 140 cm, 70 x 140 cm, 80 x 140 cm.

There are semi-double beds, the size of which is defined as 140 x 190 cm or 140 x 200 cm.

An adult mattress has a length of 190 or 200 cm - this is the generally accepted standard. The non-standard length of the bed includes 210, 220 and 230 cm. Non-standard width adult bed- all parameters that are more than 200 cm. Queen size beds are 180 x 200 cm, King size - 200 x 200 cm.

If we talk about the height of mattresses, then it differs depending on the type and amount of filler:

• Springless usually have a length of 10-20 cm;
• Spring - up to 30 cm (depending on the height of the element itself).

The higher the mattress, the more comfortable it is to spend your rest on it.

The minimum height is 3-4 cm. Typically, such products are called mattress covers - they protect the main mattress from moisture and dirt.

The optimal height of the orthopedic product is 15-20 cm, but it depends on the number of layers of the internal filler. No concept ideal height mattress, it is defined in terms of comfort and ability to pay for it. After all, it is known that high mattresses are more expensive than low ones.

The comfortable height of the bed is determined by the level of the knees. Choose a mattress that, along with the bed, would be approximately at the level of the bend of your legs (or more tall man in a married couple).

How much does it weigh?

The weight of the mattress depends on its type (spring or springless), the number of inner layers, if it is a model without springs, and the number of elements themselves, if we are talking about independent springs.

Mattresses with springs weigh less: usually square meter such a product weighs 10-14 kg. The springless model weighs approximately 15-20 kg / sq. m, but this value is strongly influenced by the quantity and quality of the "stuffing".

Spring models 30 cm high can weigh 50 kg, as well as multilayer springless "heavyweights". Mattresses are considered the lightest - without a spring with orthopedic foam inside (or other artificial materials).

What weight is it designed for?

The manufacturer usually specifies maximum amount kg per bed:

• Up to 120 kg: mattresses with Bonnel springs and models with independent springs 250 pcs. \1 sq. m;
• 120-140 kg: mattresses with independent spring block 500 units/1 sq. m and above, springless models with latex and combined filler of medium hardness;
• 140 kg and more:"heavyweights" - spring models with an independent block of 1000 units / 1 sq. m and more and with a hard surface. Mattresses with a "memory" function perfectly withstand heavy weight, but their significant disadvantage is the high price.

The maximum weight refers to the limit that the mattress can withstand.

A person with much less weight can use any, even the most solid and durable product.

Kinds

Mattresses differ in the type of their device and "stuffing". Conventionally, they are divided into classic (with Bonnel springs) and orthopedic (all the rest). IN modern models several types of “filling” are used at once, for example, a block with independent springs + a coconut and latex layer.

"Bonnel"

A mattress with such a filler consists of many springs interconnected and forming a homogeneous system. It has one level of rigidity over the entire surface, and the springs are dependent on each other: when loaded, they compress and pull the fastening elements along with them. If we talk about the advantages of Bonnel type mattresses, then this is a low cost, and, perhaps, that's all. They do not have any orthopedic effect: they do not distribute the load on the spine evenly and do not remove it from it.

For daily sleep Experts do not advise choosing such a mattress, but it is quite suitable for giving or an additional (spare) sleeping place.

Another "against" the spring "Bonnel" - a quick failure internal elements and their sag. Especially such mattresses are not recommended for couples with different weights or frankly large ones. If a couple has a different “weight category”, then the approximate scenario of their night is as follows: a person with a lot of weight creates a big load on the sleeping place, and the second one simply rolls down to his side. Of course, Bonnel mattresses are still a popular product, but people with a healthy back and normal weight should buy it.

If we talk about the design of this type of mattress, then it is very simple and often has neither quality certificates nor a long-term guarantee. Needless to say, Bonnel springs do not carry any health benefits, and rather act dacha option. Over time, they may begin to creak.

With independent springs

In its “stuffing” there are independent springs, that is, separate elements, each of which is placed in a separate case. The basis of such a mattress is also made up of springs. They take the shape of the human body, bend evenly and distribute the weight among themselves, unlike the Bonnel system, where the main load falls on the center of the bed.

Independent springs do not pull each other and do not affect the fastening mechanisms under the action of the load, provide a comfortable sleep.

Mattresses with independent springs have only one drawback - a relatively high cost, which is the greater, the more springs are in the "stuffing". The more springs inside, the smaller they are in their diameter. This means that you will have to choose a bed with an orthopedic slatted base. Frequent narrow slats will support an independent spring unit and extend the life of the mattress as a whole.

The device of such a mattress is also quite simple: in its “heart” there are small springs in diameter, each of which is enclosed in a shell. Above and below the spring block is limited by a hard coating - a box that is responsible for the softness of the mattress and protects it from sagging. The model with independent springs is ideal for daily use and has a durability that Bonnel type mattresses cannot boast.

Springless

Its design does not have springs at all and consists of several layers of materials - fillers. If you look at it in a section, then such a mattress resembles a layer cake. In the "stuffing" of a springless mattress, you can often find coifru (coconut chips) - a hard material of dark brown color. Latex, husk and polyurethane foam are often used. However, materials can be artificial and material. The first type will cost less than an analogue of natural origin. Consider the features of the materials that fill the springless mattress:

• Husk - wood chips, which is rigid and environmentally friendly, does not cause allergies and irritation. It perfectly maintains the shape of the human body, however, due to its hardness, it does not recover after sleep. Therefore, the husk needs to be shaken from time to time;
• polyurethane foam- material of synthetic origin and a good analogue natural latex, which is also cheaper;
• Latex- a natural filler, which is made from the juice of a rubber tree and is hypoallergenic.

Springless mattresses differ in height, filling and degree of rigidity.

One side of such a product may be rigid, the second may have an average type of rigidity. Models can be uniform in their filling or differ in the level of rigidity at each bed.

Orthopedic springless and independent block mattresses do not work without an orthopedic slatted bed base. It is a lattice with a couple of dozen bent birch or beech panels (lamellas). Such a base has the property of depreciation, that is, it slightly bends under the weight of the mattress and the person, which gives a uniform load on the spine.

They are divided into sizes for children, teenagers and adults. Teenage models are usually narrow (up to 120-130 cm) and softer. They can be stationary (for constant daily rest) or folding (camping mattresses).

How to choose the right one?

Experts say that for daily use, you need to choose an orthopedic mattress that will support the spine during sleep and remove the main load from it, that is, a mattress with an independent spring block or a springless model of varying degrees of rigidity. Spring "Bonnel" are good for giving or a spare bed, which is planned to be used no more than once or twice a week. To make the purchase successful, experts recommend adhering to a simple algorithm when choosing.

You will learn more about how to choose the right mattress for a double bed in the following video.

Rigidity

Most important criterion choice of bed. If you choose a mattress that is too soft, then the spine will literally fall into it, if it is too hard, then the back will hurt treacherously in the morning. The stiffness parameter is determined for each person individually, but manufacturers conditionally divided sleeping products into three types: soft, medium hard and hard. Soft mattresses suitable for the rest of grown-up children and adolescents, hard ones - for people with a problem spine, medium ones - for everyone else, and especially the elderly.

Before buying, it is advisable to test the mattress and literally lie down on it to understand how hard or soft it is. Experts advise choosing double-sided models, where one side is soft, the second is medium hard, or one is medium hard and the other is hard.

Double-sided mattresses need to be turned over once every 2-4 months to maintain its orthopedic properties.

Human weight

In the product passport, the manufacturer usually indicates Weight Limit person per bed. That is, this figure must be multiplied by two to determine the total maximum load on the mattress.

Experts advise choosing soft models for people weighing up to 50 kg (children, adolescents, adults, but not babies under 3 years old). Products of medium hardness are suitable for people weighing up to 90 kg, and such options are the most "running". People with large or overweight experts advise paying attention to hard mattresses, which will withstand the load and support the spine during rest. The degree of load on the mattress is determined by the person in the couple who weighs more.

Springless mattresses are distinguished by wear resistance and endurance:

• Up to 100 kg can withstand products with a monolithic filler artificial latex;
• 120-140 kg - products with a coconut layer in the "stuffing".

Monolithic latex models are affordable, but they cannot withstand more than 90-100 kg per bed.

The weight of 130-140 kg per place is easily supported by products with a combination of natural and artificial fillers such as coconut flakes, polyurethane foam and natural latex.

How to match to the bed?

The parameters of the product must strictly correspond to the dimensions of the bed itself. For example, a bed has a width of 160 cm and a length of 2 meters, respectively, a mattress for it is selected 160 x 200 cm. You cannot put a mattress shorter in length (190 cm) or narrower in width here.

The size of the bed itself is selected taking into account the height and build of the person. The standard bed lengths are 190 cm and 200 cm. The minimum comfortable length is calculated by the formula: human height + 15 cm margin. Of course, you can choose a mattress that is much larger in length and width, which can make sleep much better. If we talk about the width, then the most comfortable value is 80 cm for one person or 160 cm for two.

When choosing a mattress for a couple, there are some aspects to consider:

• If the difference in their weight is insignificant (less than 10 kg), then you can choose any mattress design, except for the Bonnel spring type. Healthy sleep experts say that comfortable and healthy sleep it is necessary to choose 500 springs per sq. m of sleeping space and more.
• If partners have a difference in weight of more than 20 kg, then you should give preference to mattresses with an independent spring block. At the same time, their density should be 1000 springs per square meter. m of sleeping space and more. A good choice– model with the double spring block Double Spring (DS).
• A couple can opt for two separate mattresses instead of one single mattress. If the base of the bed does not have fixing sides, then the mattresses will now and then disperse to the sides. Another way out is to buy one double mattress with varying degrees stiffness for each bed.

Manufacturer's choice

Choose a time-tested brand, even if you are faced with buying a bedroom product for the first time. It's good if the manufacturer has a store with exhibition samples mattresses so that you can choose the optimal firmness and height of the bed.

About a hundred worthy manufacturers are represented in Russia, among which there are large companies and small sewing enterprises - Ormatek, "Sweet Sun", "Pervenets", Perrino, "Matraskin", "Harmony", "Ash", "Damascus", "Lisna", TM "Morpheus" and others. Rating the best manufacturers according to experts is presented below.

Orthopedic mattresses are usually very bulky and not easy to transport, because they cannot be divided into smaller and lighter parts. Therefore, clients often turn to us with the question: “How much do your orthopedic mattresses weigh?” On average, the weight of our spring single mattresses is from 10 to 20 kg, one and a half sleeping ones - 20-35 kg, and double up to 45 kg. IN spring mattresses weight depends on the type of spring block. Mattresses based on bonnel are lighter than mattresses with independent spring blocks about 1.5 times. Springless mattresses are significantly heavier, especially mattresses with natural fillers such as coconut fiber or latex. Springless coconut latex double mattresses can weigh up to 90 kg and even more.

Weight table orthopedic mattresses Bonato

Most of the well-known carriers, when transporting orthopedic mattresses, take the volume as the main indicator for calculating the cost of delivery. The weight of the mattress in our case is a secondary indicator. Therefore, we bring to your attention a generalized table with the volume of each mattress of a standard size.

Table of the volume of orthopedic mattresses Bonato

The data shown in the tables may vary slightly. The volume of mattresses is slightly increased due to the additional packaging that we use when sending by carriers, and the weight of mattresses is also very often rounded up on delivery services. Therefore, the above parameters should only be used to calculate estimated cost delivery.

You can find out how much the beds weigh and which volume they have in the article Bed parameters.

So, now you know how much they weigh and what volume Bonato orthopedic mattresses should be and you can independently determine how much it will cost to deliver a mattress to your city. To do this, go to the website of the carrier that suits you (Delivery, New mail, Intime, MistExpress, etc.), find a calculator there, select the city of dispatch - Rivne, indicate the type of delivery warehouse-warehouse and enter the parameters of the orthopedic mattress. At present, as practice shows, the cheapest delivery cost is by the Deliveri carrier, but they do not have such an extensive network of branches as in Nova Poshta.

We draw your attention to the fact that we deliver mattresses to the cities of Kyiv, Lutsk, Rivne, Zhytomyr, Ternopil and Khmelnytsky free of charge by our own transport. In addition, we send orthopedic mattresses to the warehouse of the Delivery or Ying-time carrier free of charge if the cost of the mattress exceeds 3,000 hryvnias. In case of an order worth more than 2000 hryvnia, you can count on compensation of 50% of the cost of delivery to the Delivery warehouse in your city. Read more in the Delivery section.

Many buyers want to know how much a mattress weighs. First of all, it is important for them to understand whether it is difficult to carry it. However, in production, this parameter has a different meaning.

What do you need to know?

• Exist standard dimensions for transportation.
• However, after 1–2 weeks, the product changes its dimensions (its thickness changes from 14–16 cm to 8 cm).
• For a responsible manufacturer, the weight of the mattress is determined precisely by the “residual” height. The quality of the product depends on this (without bumps, bedsores or hills).
• Incorrect weight with deviations in any direction indicates low operational properties products.
• The "residual" thickness should be 8 cm. Further, it all depends on the size. For a mattress 60x120 cm - 3.4 kg with a cover, for 90x190 - already 9 kg. You can see the data in the table.

Thanks to modern Italian equipment, the Matrasoff company withstands exact weight indicated in the table. The error is only 100–150 g. The parameter strictly complies with the standards of GOSTs of the times of the USSR for army mattresses with a service life of 5 years.