We make a fireplace with our own hands from drywall. Do-it-yourself drywall fireplace: step by step instructions. Finishing and design of the portal

A drywall fireplace is a quick design solution that everyone can handle on their own with a minimal set of working tools at hand. Although the manufacture of false fireplaces is possible from almost any improvised means, you can use the remnants of drywall after leveling the walls or organizing suspended ceilings.

Do-it-yourself corner or hinged plasterboard fireplace will decorate both the bedroom and the library. Such a decor item can become a convenient bookshelf, a niche for candles, lanterns, a stand for kitchen utensils. Such a heat source will help divide a large area into functional zones.

Drywall fireplace: before starting work

IMPORTANT! When performing calculations, take into account the thickness of the plasterboard sheets with which you have to work (too thin - 6 mm each - you should not take it, stop the choice at 9.5 mm or 12.5 mm).

For a fireplace with your own hands you will need:

1. drywall;
2. profiles UD and CD (during the connection, the frame of the profiles will be formed end-to-end);

Do-it-yourself fireplace made of plasterboard in a fusion interior from Russian designer Inna Velichko

First you need to decide on the location of the drywall fireplace, as well as its appearance: draw a plan for the location of the drywall fireplace in the interior, take the necessary measurements and make the main drawings on a scale. The drawing should contain not only design sketches, the object being executed relative to its location, but also a scheme for fastening the structure, the frame of the drywall fireplace.

Calculate the desired depth of the drywall fireplace, the length and height of the structure for the possibility of laying electrical wiring.

Work progress

To simplify the work, it is recommended to calculate the material consumption from the drawing and dimensions. Making a fireplace with your own hands from drywall is a rather laborious process, so it’s better to spend time on its exact layout first, so that you can later complete the design itself without a doubt. The layout is easy to make from packaging cardboard and polystyrene on PVA glue or simply on adhesive tape.

Exact dimensions and fine finishes are not required - a ready-made plasterboard fireplace model hastily painted with quick-drying white paint.

markup

DIY fake fireplace by Chris Snook

Based on the working drawing, transfer the markup to the details of the fireplace, as well as to its location, outlining the floor and walls.

We fix the profile

Do-it-yourself plasterboard fireplace. Step 1 - Organize the base of the drywall fireplace from UD profiles Do-it-yourself drywall fireplace. Step 2 - Finished Plasterboard Fireplace Frame on a Low Podium

IMPORTANT! If we are talking about connecting an electric fireplace to heat a room or its imitation (banal - a screen with a flame image), the electrical supply must be carried out in advance. When attaching a metal frame to the walls of the room, remember about the routes of electrical cables so that you do not inadvertently damage the electrical network with screws.

Do-it-yourself plasterboard fireplace. Step 3 - Begin plasterboarding the fireplace frame. Please note that by the beginning of work, an electrician was installed at the location of the false plasterboard fireplace, sockets and switches were arranged. Do-it-yourself drywall fireplace. Step 4 - Finishing the frame with plasterboard. To make an arch in a niche, thinner drywall (from 6 to 9 mm) was used, and a trimmed profile was attached using a special method to create the desired bend shape. Do-it-yourself drywall fireplace. Step 5 - Finishing the fireplace with stone Do-it-yourself plasterboard fireplace. Step 6 - Finishing the finishing work. Please note that the horizontal top plane of the drywall fireplace is covered not with a drywall sheet, but with a wooden table top.

Plasterboard fireplace: photo in the interior

The best ideas for DIY fireplaces, photos of which are still in the gallery below, are easy to implement. Black and Milk series: DIY decorative plasterboard fireplace Grenfell Peplow Michael Abrams

Do-it-yourself false fireplace: estimated cost

• in Moscow - from 1,800 rubles / work, about 2,100 rubles / materials;
• in Kyiv - from 450 hryvnia / work, about 520 hryvnia / materials.

They belong to the decorative elements that are most often installed in apartments. Due to the variety of facing materials, such designs can be combined with various interiors. Everyone can make a drywall fireplace with their own hands, since it is enough to create it with minimal skills in working with drywall material and strictly follow the instructions.

The use of a full-fledged fire in such an artificial fireplace is strictly prohibited. On the Internet, you can find articles that provide instructions for finishing plaster fireplaces to use real flames, not imitations. Experts categorically do not recommend implementing such instructions, as the consequences can be fatal.

Assembling a false fireplace from drywall with your own hands allows you to get not only an exquisite interior element, but also a heating device. Heating in such units is carried out due to special heating elements, which are powered by energy from the electrical network.

What are the advantages of hand-made false fireplaces?

Decorative plasterboard fireplaces have many advantages. Consider the benefits of using such devices in more detail:

• plasterboard fireplace imitation can be installed in any apartment. Moreover, for such work you do not need to obtain any permits;
• the shape of the device is selected according to the features of a particular interior, which is very convenient;
• the assembly of a fake stove is carried out using simple materials that can be easily purchased on the market or in any specialized store;
• the absence of a source of open fire allows you to ensure the safety of such a design;
• the organization of a drywall oven in an apartment or house is characterized by low financial costs;

• the upper partition of this design is functional, as it can be used as a stand for family photos (or any other items).

Note! If necessary, a do-it-yourself decorative plasterboard fireplace can be equipped with electric heating.

The organization of electric heating is quite simple. As mentioned above, the use of an open flame in such structures is strongly discouraged. If you decide to use an open fire in such an imitation of a furnace, then you need to take care of lining the back panel and side surfaces with refractory materials. Such a sheathing is made quite simply with your own hands. Photos of decorative plasterboard fireplaces with different heating options can be studied on the Internet.

Such decorative elements can not be fixed on the wall, which will allow you to move it anywhere in the room at the request of the owners.

Varieties of decorative plasterboard fireplaces

Depending on the purpose of use, there are two main types of these units:

• interior;
• electric.

In the first case, the stove is used as a decorative element of the interior. Imitation of flames in such a design is carried out due to the process of burning ethyl alcohol. Such a hearth is not suitable for full-fledged heating of a room. Today, the most popular are interior units made of gypsum plasterboard (GKL). During the installation of such a device, there is no need to use refractory materials. Almost everyone can organize such a false fireplace. Photos of such structures, as well as all the necessary drawings, can be easily found on the Internet.

All interior units can be conditionally divided into the following categories:

• imitating fire burning;
• imitating fire burning and smoldering logs;
• imitating a natural fireplace.

The third option is the most popular, as it does not require the organization of a ventilation system. In the first two cases, ventilation may be required to eliminate the combustion products of the gas.

The electrical device, in addition to serving as a decorative decoration of the interior, also performs the function of a heater. Electrical devices are characterized by high power and have an appearance that most closely resembles natural fireplace models. Ready-made false fireplaces are sold in specialized stores, as well as on the Internet. You can buy a finished structure to save time, however, from a financial point of view, it is better to assemble this drywall unit yourself.

Do-it-yourself drywall fireplace: choose a design

Installing a full-fledged fireplace in an apartment requires not only large financial costs, but is also accompanied by other difficulties. But this type of indoor stove creates a unique atmosphere in the house, so many owners decide to install a decorative drywall fireplace with their own hands. Photos of apartments with fireplaces show that this element often becomes the central “figure” of the interior and makes it unique. Photos will also help those who wish to acquire a false fireplace to decide on the design and choose the most acceptable option.

The dimensions and design of the imitation oven are determined according to the following rules:

• if you intend to install a fireplace that will be of medium size, a small plasma TV can be placed inside it. Such a solution will allow simulating flames without installing gas burners and ventilation pipes;

The principles of using the fireplace as a key element of the interior to create a cozy atmosphere in different styles. Popular design tricks.

Self-tapping screws must be special, designed to work with drywall, as well as a suitable length. The last parameter depends on the thickness of the GCR.

False fireplace with their own hands. Instruction step by step. Photo stages of work

How to make fake fireplaces for the living room or any other room? In order to answer the question of how to make a fireplace from plasterboard material, it is necessary to study the three main stages of its creation:

• execution of the frame;
• sheathing of the structure using GKL;
• portal layout.

The framework is a basis of the future portal of the furnace. The work of assembling a frame structure must be taken seriously. Before mounting the frame, it is necessary to mark the surfaces to which the structure will adjoin. The marking conveys the contours of the future furnace and allows you to estimate its actual size.

Important! When marking, it is necessary to ensure that all lines are even. As a result of the intersection of the wall and floor lines, they must form a right angle (90 °).

After marking, you can proceed directly to the assembly of a drywall fireplace with your own hands. Step by step instructions for the implementation of the frame is presented below.

To assemble the base of the rear wall, guide profiles are fixed to the wall (by marking). Profiles are fastened using dowel-nails. The base of the rear wall includes two vertical and transverse racks. When assembling the frame, it should be remembered that the numerical indicator (cm) from the floor to the lower crossbar is the determining factor in the height of the parapet.

Next, the guide profiles are fixed along the contour of the combustion chamber. After that, the profile is fixed on the floor, which is fixed along the parapet line. Then the front racks are mounted, the distance from which to the rear wall is an indicator that determines the depth of the fireplace. The front pillars are joined together by means of crossbars. Docking of the front racks with the rear wall is carried out using crossbars located in a horizontal plane.

After assembling the front and rear racks of the fake stove, you can proceed to the installation of the parapet racks and tying them with crossbars. Then, in the front part of the frame of the unit, the racks of the combustion compartment are fixed, which must be docked with the main racks by means of crossbars.

At the end, the vault of the furnace compartment is mounted. To make a curved arch, you need to cut the profiles and bend them in order to get the desired shape. The step of the cuts should be approximately 1.5 cm. Thus, the frame of the portal for the fireplace from drywall is assembled.

On the Internet you can find all the necessary materials for assembling a fireplace with your own hands from drywall. Photos of frame structures at different stages of assembly will help to do this work correctly.

Do-it-yourself drywall fireplace: step-by-step instructions for sheathing the frame

In order to sheathe the fireplace with plasterboard sheets, you first need to cut them (in accordance with the dimensions specified in the project). Consider the procedure that needs to be done to cut the GCR:

• first you need to press the ruler to the surface of the GKL. The ruler must be pressed strictly along the cut line;
• then you need to draw a construction knife along the ruler;
• after making an incision along the line, you need to break the drywall sheet with your hands and cut through the cardboard layer on the other side.

Helpful information! Complex elements of the fireplace (for example, the vault of the furnace compartment) require high accuracy when cutting them out of the plasterboard. Therefore, you must first mark up such parts on a sheet of graph paper.

Cutting complex parts is done using a special device - a jigsaw. On the Internet, you can find various photos of drywall fireplaces made using intricate elements.

Finished parts are fixed on the frame by means of self-tapping screws, which must be suitable for working with drywall material. The pitch indicator for such self-tapping screws ranges from 10 to 15 cm.

It is necessary to clearly follow the algorithm of actions proposed below in order to make a drywall fireplace with your own hands. Step-by-step instructions for sheathing the frame of the fireplace with plasterboard parts look like this:

• from the joints of sheets that are placed in the same plane, a chamfer is cut off (the width of the cut should be approximately 5 mm);
• after that, the joints are reinforced. For this, a special serpentine mesh is used;
• then the joints are covered with two layers of primer. The application of the second layer of primer is carried out only after the first layer is completely dry;

• after the second layer of primer has dried, the resulting structure is treated with putty (starting);
• then the entire portal is processed with putty.

Thus, a ready-made portal for a drywall fireplace is obtained. It will not be difficult to do it with your own hands, however, it is necessary to take into account all the above nuances.

How can you make a fake fireplace with your own hands? Photos of interesting ideas

Consider the most popular materials used to decorate fireplaces:

• self-adhesive film or "self-adhesive";
• ceramic tiles (the most common material for decoration);
• stone (natural or artificial);
• brick;
• marble;
• wood.

In addition to the above materials, forged metal elements can be used for facing a decorative fireplace. However, an important point when choosing a facing material for the portal is that the decorative structure should not experience excessive load.

With your own hands, you can line the fireplace with any material, but experienced craftsmen do not advise decorating the stove yourself if the cost of the material is significant (for example, natural stone).

Facing the fireplace portal with ceramic tiles is quite simple. To do this, you need to use a special tile adhesive and use it to glue the tiles to the portal. Instead of glue, you can use liquid nails, which also work well in this matter.

Do-it-yourself corner false fireplaces made of plasterboard: features of arrangement

When choosing a place for a corner fireplace, it is worth considering two basic rules:

• it is advisable to choose the corner of the room that is least involved;
• a popular solution is to install a decorative stove in the corner opposite the front door.

As in the case of installing a central fireplace, you first need to draw up a drawing of the future unit, as well as make markings on the walls and floor.

Note! If you want to install an electric heater inside a decorative corner fireplace, then it is recommended to pre-wire the power supply.

The assembly of the frame and its subsequent sheathing is carried out in the same way as when organizing a central fireplace. The design itself, of course, will differ due to the installation location. It is advisable to study the photo of false fireplaces before installation. It is quite simple to make a corner oven with your own hands, however, you must follow the instructions for assembling the frame, as well as its cladding and cladding.

Experts also advise paying attention to the reliability of fastening the GKL using self-tapping screws. They are recommended to be twisted to the end so that they do not protrude above the drywall surface.

By making a regular or corner fireplace with your own hands from plasterboard material, you can get not only a beautiful element of the interior, but also a heating device for the room. In addition, such hearths have a top panel - a shelf on which you can place a variety of decor items.

The fireplace is often used for heating country houses and country houses. In recent years, it has become a popular addition to the interior and ordinary apartments in the city. This is not surprising, because a beautiful decorative fireplace creates a cozy atmosphere in the home and can act as a source of heat. Creating a full-fledged hearth in an apartment is very difficult and requires, in addition, large financial investments and certain skills. But to equip a drywall fireplace is very simple.

Purpose of decorative fireplaces

Some developers will say that this is not a real fireplace at all. But if you wish, by lining the frame with brick and creating an imitation of firewood, you can get a fireplace that will be practically indistinguishable from the real one. This tradition has entered our life from Great Britain. On cold autumn evenings, it is good to relax by the open flame of the fireplace, the fire creates a peaceful mood. Modern heating systems heat apartments much more efficiently, but the fireplace still does not give up its positions.

And the point is not at all in the warmth that it radiates in moderation, but in the gifted feeling of comfort and coziness. And also in design. A tasteful fireplace will be a good addition to the interior of even the most outstanding room. Many owners of apartments in the city have repeatedly sighed with regret about the impossibility of installing such a structure in their own home.

And absolutely in vain. Plasterboard fireplaces are a great alternative to traditional hearths and are primarily installed to create a romantic atmosphere. But at the same time, it is worth clearly realizing that false fireplaces are a props, they will never be able to kindle a fire.

False fireplace device

Decorative fireplaces made of plasterboard consist of a body and equipment that is placed in it and imitates an open flame. The body itself can be made of almost any non-flammable material with its future lining. Most often, the flame in the fireplace is simulated using flashing lights. Electric heaters can also be mounted in the housing.

Advantages of drywall fireplaces

False fireplaces made of drywall have a number of advantages that allow them to stand out from other devices. I would like to note the ability of the product to take any, even incredible and unimaginable forms, as evidenced by the diverse photos of drywall fireplaces. Decorative fireplaces are mobile, if desired, they can be quickly dismantled and rearranged to another place.

False fireplaces are considered quite safe, because there is no open source of heating. Such a fireplace can be installed in any, even the cramped room. The worries that hot coals can get on the floor and furniture, or the child will be burned, lose their relevance, leaving room for pleasant emotions that come from the transformation of the home. In addition, their democratic price is well known, because only a profile, insulation, drywall and finishing materials are required.

Designs can be given any shape and purpose. A hinged or corner fireplace can really decorate a small room or library. It is convenient to read near such a heat source, and bookshelves can be installed below or above for convenience. A do-it-yourself plasterboard fireplace can successfully act as an original stand for utensils, while illuminating objects, and also dividing large rooms into functional areas.

Types of false fireplaces

Decorative plasterboard fireplaces are divided into 3 groups: symbolic, conditional and authentic. Reliable fireplaces are almost indistinguishable from real ones, because they are exactly the same size and design. Burners of bio-fireplaces are installed in the furnace, which, in fact, is a complete copy of the traditional burning hearth.

Conditional false fireplaces are characterized by the obligatory presence of a portal that protrudes from the wall. At the same time, a conventional electric fireplace can be installed in the furnace. Thus, a false fireplace turns into a portal for an electric fireplace. Symbolic fireplaces can be made from different materials, but they do not correspond either in size or design to real fireplaces. This is most likely some kind of drawing with decorative elements on the wall.

Building a fireplace with your own hands

Feature of decorative fireplaces consists in universality. They are usually used for their intended purpose by creating an imitation of fire in the hearth. And you can focus on the fact that this is really a false fireplace, slightly modifying its functional purpose. In any case, drywall is an environmentally friendly material that does not cause difficulties in work.

Location of the fireplace

If the apartment is located on the top floor, and you got permission to build a fireplace, you should ask how to make a drywall fireplace complete and install a chimney, taking into account all the rules. According to tradition, it is customary to place fireplaces near the main wall.

If we are talking about a false fireplace, then it is customary to hide its main functional part behind a plasterboard wall. The hearth can be placed in the corner of the room. Island fireplaces have a spectacular look, only they need to be correctly entered into the interior. The room should be spacious enough, the hearth should not look bulky and ridiculous. It is recommended to install such a model at a low elevation. The fireplace room serves as a place of rest, and therefore, a place suitable for this should remain next to the hearth.

Sketch of a false fireplace

Next, you need to delve into the calculations and measurements. It is necessary to draw a portal of the future fireplace on the wall and carefully measure the layout. It is not necessary to design even and straight structures. With proper preparation, drywall can be bent into a radius. On the drawing of the fireplace, you should outline the locations where the base will be and where it is planned to mount the frame.

As a rule, a concrete pillow is made as a base, which creates additional thermal insulation and raises the body above the floor. The dimensions of the base will depend on the planned width of the fireplace insert. Remember that the existing walls also need to be insulated from heating with asbestos, brick or aerated concrete.

According to the drawing of the drywall fireplace, it is worth marking the points for the frame from the profile, which is usually fixed using self-tapping screws. Make many holes that have a depth of 5 millimeters. It is convenient to make punctures with a special needle roller. They are needed to get to the core. After that, moisten the workpiece with plenty of water, fix it on the template and leave to dry. After the gypsum core dries, the drywall will take on the desired shape.

Frame installation

Any drywall constructions require the organization of a solid frame. The fireplace portal is no exception. You can make a frame from wooden or metal bars. The use of lumber requires precautions, otherwise you can spoil the decorative finishes and drywall.

It is preferable to choose metal profiles, because wood is susceptible to moisture and harmful insects, which is detrimental to the structure. It is customary to make the frame in such a way that it is made of drywall blanks. This is necessary to obtain a rigid and durable structure. After that, you can begin to trim it.

Plasterboard fireplace surround

The inner casing of the fireplace is made of heat-resistant materials and provided with reflective elements such as foil coating. The outer skin is made from plasterboard blanks. At the end of the place of fastening with screws, it is necessary to putty. After the putty has hardened, it should be treated with a deep penetration primer and the structure sanded.

Decorative fireplace trim

The most interesting part of the work on arranging a drywall fireplace is its decoration. To finish a false fireplace, you can use a variety of types of finishes up to the most sophisticated decor. And how many videos about drywall fireplaces and their design can be found, innumerable!

Painting the surface of the fireplace is considered the most economical type of finish. Before direct painting, the entire surface of the drywall fireplace must be carefully puttied and sanded with fine-grained sandpaper to ensure the most even surface.

Sticking a self-adhesive film is also one of the most economical solutions. The film is glued to a smooth puttied and primed surface of a false fireplace. For decoration, it is worth choosing a film with a pattern that imitates wood or natural stone, depending on the flight of fancy.

Facing the hearth of drywall with artificial stone is one of the most suitable options that are known to mankind. This finish looks solid and impressive. It is customary to attach artificial stone to drywall using an adhesive mixture.

The surface of the hearth can be finished with decorative plaster. To date, there are many types of material that imitates natural stone, for example, just remember Venetian plaster. For this, ready-made dry mixes are available for sale, which are intended for a private developer.

For facing a false fireplace, you can purchase ceramic tiles of different colors and patterns that repeat the most diverse types of natural materials: from wood to stone.

This option is called one of the traditional types of finishes. When gluing tiles on drywall, you should use a reinforcing plaster mesh. Before laying tiles with an adhesive mixture, the surface of the hearth must be primed.

To finish the drywall hearths, you can choose decorative polyurethane stucco molding, which can be easily glued with mounting glue. After installation, it is customary to paint such decor elements in different colors: from snow-white to “silver” or “bronze”.

Decoration of the fireplace portal

The firebox and the plasterboard fireplace portal can be finished with artificial stone or ceramic tiles, which are somewhat different from the surface of the entire structure. Close the portal itself with a black-painted metal forged grate, which will give the false fireplace the look of a classic wood-burning hearth.

Fireplaces look interesting, when decorating the surface of which tiles were used with an image under natural granite or marble, as well as with imitation under the surface of a brick. You will get a beautiful cladding by decorating the entire surface or edges with artificial stone, which is matched in color and texture. And the presence of a stylish decorative stucco molding made of ordinary polyurethane will make your fireplace quite sophisticated.

By equipping the space for the fireplace insert with a heating panel with an imitation of a flame and a woodshed, you can create a fireplace that is not inferior in aesthetic qualities to a working fireplace, which is equipped by a professional. Enhance the realism by filling the firebox to the top with logs. They look especially harmonious in fireboxes, which have a semicircular shape. Firewood looks bewitching, which is laid out on a metal grate.

Install various accessories and candlesticks with candles on the structures in a chaotic manner, which in the blink of an eye will turn the fireplace into an exquisite decoration, which will perfectly complement a romantic evening. For everyday use, put books and other important small things in this place, without which it is impossible to imagine home comfort.

Similarly, a fake fireplace can be turned into a place to display your favorite collection, such as figurines or shells. A plasterboard fireplace in New Year's decoration looks especially attractive. It can be decorated with Christmas balls, gift socks and garlands. A fabulous atmosphere and festive mood is guaranteed!

Thus, it is difficult to recreate a full-fledged fireplace in the apartment. These works can be done qualitatively only by experienced specialists, whose work costs a lot of money. But at the same time, anyone can equip a beautiful false plasterboard fireplace in the living room without special skills and sufficient work experience.

Not so long ago, the fireplace performed only one function - it heated the premises. Today, this part of the interior has become a full-fledged decoration, but not every house or apartment has the opportunity to install such a heater. With it, you can create the feeling that you are in a chic mansion, and not a simple city apartment.

The fireplace is able to create a unique atmosphere in the house, bringing a certain zest to the interior. Having visited the stores, you can purchase a ready-made one. However, if you complete the design yourself, it will cost much less, and it will be quite simple to carry out the work. Such a product will not heat the room, but will create a unique design and an aura of comfort.

You can use ordinary drywall for this, with which you can create an almost complete imitation of a wood-burning fireplace. Such a decision is sometimes dictated by a practical component. This is due to the fact that after the repair quite often there are pieces of drywall that can be used.

Instrument preparation

If you decide to make a false plasterboard fireplace with your own hands, then first you need to decide on the design of the structure, its parameters and location. Sometimes home craftsmen resort to manufacturing that fits perfectly into small rooms.

• drywall;
• screws for metal;
• putty;
• Bulgarian;
• roulette;
• pencil;
• metallic profile;
• drywall screws;
• screwdriver;
• metal scissors;
• building level.

Preparation before installation

It is quite simple to build a false fireplace from drywall with your own hands. To do this, at the first stage, a sketch is prepared, according to the dimensions of which marks must be applied to the wall, and installation will be carried out on them. When assembling a corner fireplace, markings are carried out in the corresponding corner. First, the back of the frame is assembled, which is attached to the wall, this will allow you to understand how the fireplace will look.

Frame assembly

When a false plasterboard fireplace is made with your own hands, you need to mount the frame first. This work involves three stages. At the first, the measurement and marking of the profile pieces is carried out. The next step is to cut them and connect them into a single structure. The profile can be fixed with metal screws using a screwdriver.

In order to make the design look more original, a small arch is made in the upper part. On one side of the profile, cuts must be made, the elements are knocked down in the form of an arc and fixed to the frame. If you decide to make a false plasterboard fireplace with your own hands, then remember that you should stiffen the system, jumpers are used for this.

The maximum possible step between the profiles should be between 30 and 40 cm. If you plan that an imitation hearth will be connected to the fireplace, then you must first bring the electrical cables to connect the backlight.

Frame sheathing

A decorative plasterboard fireplace can be sheathed after the installation of metal profiles has been completed. At the first stage, the frame must be measured by marking the parameters on the drywall with a pencil. Blanks can be cut with a knife. Drywall to the frame is fixed with screws, the distance between which will be a limit of 8 to 10 cm. Drywall can be anything, for example, waterproof or ordinary. It is better to use the one that is intended for installation on the wall. Sometimes a ceiling is also used, but it has a smaller thickness.

Work methodology

When a decorative drywall fireplace is made, it is recommended to make the frame separately, and then proceed to attach it to the surface. If the structure on one side will be located quite close to the wall or rest against it, then you need to attach drywall and only then fix the structure to the main wall.

If you neglect this recommendation, then subsequently there will not be enough space to fit a screwdriver. Drywall in this case can be strengthened with a screwdriver, which is quite difficult. In order to rationally use drywall sheets, jumpers are installed on the frame, corresponding in size to pieces of finishing material.

Workpiece bending

Decorative fireplaces for an apartment may suggest a bend. To begin with, you must complete its template. Then a strip of the desired size is cut out of the canvas, which can be laid on the inside of the future bend. This part has a lot of 5mm holes. Punctures can be made with a spiked roller. Holes are needed to damage the cardboard layer.

The workpiece is wetted with water, and after softening the core, it can be fixed on the template and left until dry. Water must not penetrate into a solid layer of cardboard, otherwise the product may break. It is quite simple to bend a metal profile, for this you need to make cuts on the sides, the distance between which is 1 cm.

Fireplace finish

If you are thinking about the question of how to finish a false fireplace from drywall, then you can use the method of puttying seams and joints. In this case, you need to stock up on putty tape. If the surface will not be painted or pasted over with a film, this is not necessary. The ends of the sheets should be well aligned, as should the intersecting planes.

The cladding should not be continuous, because the devices installed inside will need heat dissipation. If you plan to place a heater inside, it is important to ensure that there are ventilation holes, which should be located at the top of the structure. A false plasterboard fireplace in the interior will look great if you decorate it. For this, ready-made panels or tiles are quite often used. You can apply the method of staining under the lime or finish the surface under the metal.

As practice shows, one layer of putty will not be enough to achieve evenness of the surface, so the base must be primed, dried and covered with putty again. If you are satisfied with the result, then you can start sanding the surface. For this, fine-grained sandpaper is used. At the final stage, artificial stone or facing brick can be used. Gypsum stucco will look effective in the interior, the elements of which can be glued to the surface. After that, the design is painted in a suitable shade.

For decoration, you can use a mirror, wallpaper or paints and varnishes. You need to finish the firebox, and you can use ceramic tiles for this. It can be glazed, and its shade, shape and texture can be very different. You can cut the tile to fit it in size with a grinder or tile cutter. In this case, a do-it-yourself false fireplace, the step-by-step instructions for making which is described in the article, can only be decorated with tiles laid on a pre-primed base.

Next, an elastic cement-based adhesive is kneaded. The mixture is applied with a spatula to the tiles, leveling can be done with a notched trowel. The layer thickness should be 5 mm or less. It is necessary to start work from any of the lower corners. Between the rows you need to insert crosses to achieve the same thickness of the seams.

The correct laying of the material must be checked, while excluding the mixture from getting on the front surface of the finish. When a false fireplace is made with your own hands, a step-by-step instruction for the manufacture of which should help you avoid mistakes, after the composition has dried, which will take several days, you can start grouting. The protruding sections of the glue are cut with a knife, the seams are cleaned with a soft sponge.

The grout should be applied with a pastry syringe or with a thin brush. Excess can be removed with a dense sponge. The same technology is suitable for finishing firewood. Instead of tile adhesive, you can use liquid nails, this will speed up the process.

Portal finishing

The fireplace, the drawing of which is presented in the article, may include a tiled firebox and a portal made of a smoothly painted surface or artificial ones. The portal frame is made of wood, but ceramic tiles are also suitable for this. The pre-primed drywall base is painted with water-based solutions. The first layer is applied with a brush, all subsequent layers are applied with a roller. Wait between coats until the surface is completely dry. Matte paint in light colors will look great in any light.

Making a corner fireplace

The dimensions of a drywall false fireplace, if installed in a corner, will be determined by your preferences. For the frame base, you will need a metal profile, in addition, you need to prepare rack profiles with dimensions of 60x27 mm. should have dimensions equal to 28x27 mm.

The screws will have a length ranging from 14 to 16 mm. To connect the drywall and the frame, you will need self-tapping screws with a countersunk head. Many craftsmen recommend using a hand saw for cutting drywall, the cutting depth of which varies from 16 to 24 mm. However, if there is no such tool in the arsenal, you can get by with a kitchen knife.

If you decide to make such a fireplace, it is recommended to prepare a drawing in advance. On it you can specify the height of the structure, which will be 898 mm. As for the width, it will be equal to 1041 mm. Each side will be 737 mm. As for fire, in this case, you can use an electronic photo frame. Its use will be safe.

Using a screwdriver and self-tapping screws, the UD profile must be strengthened to the floor surface. The distance between the fasteners should be 30 cm. The plank will be parallel to the wall, it should be installed first. The side elements must be fixed in such a way that they do not extend beyond the first profile. On the base wall, according to the markup, you need to strengthen the wall profiles. UD profiles are installed on the finished fasteners, then those that will be located parallel to the floor surface.

Conclusion

A corner raised plasterboard fireplace can be finished with self-made gypsum stones. To do this, prepare a silicone mold, the inner surface of which is lubricated with petroleum jelly. Gypsum diluted to the consistency of sour cream is poured into it, and the surface can be leveled with a spatula.

The material will be ready in 20 minutes. Decorative fireplaces intended for an apartment are quite often decorated with gypsum stones, which are made using pigments. If these were not at hand, the surface of the stone can be varnished after hardening.

The false fireplace has firmly won its place in the niche of decorative elements of the interior of city apartments. This is largely due to various technical obstacles to the installation of a real, functional hearth. Sometimes it is much easier to install, for example, in the living room, a decorative fireplace.

Various shapes and designs

Materials and tools

One of the most popular materials for self-manufacturing of niches, partitions, shelves and other structures, including decorative fireplaces, is drywall.

Such popularity is explained by many reasons. Drywall as a building and finishing material is very easy to install, it is easy to make constructions of various geometry from it, and the price of drywall is not so high.

For work on the manufacture of a false fireplace with your own hands, you will need the following set of materials, tools and fixtures:

directly drywall itself, the number of sheets depends on the size and geometry of the future design

profiles of two types: rack and guide

self-tapping screws for metal (for assembling profiles) and self-tapping screws for drywall (with a countersunk head)

• metal shears

  screwdriver

It is also worth noting that the type of facing material will depend on the finish of the false fireplace portal. If tiles are used for decoration, professional craftsmen recommend using a moisture-resistant grade of drywall.

fireplace project

At the start of work, you must first decide on the configuration (model) of the fireplace. To do this, you can find a suitable image or drawing in any catalog, magazine, find a photo on the Internet, or draw a sketch yourself.

Then we need to choose a place where the future false fireplace will “register”. Based on the size of the “hearth”, we draw up an appropriate plan (on a scale), and also apply appropriate markings along the contour on the floor and walls.

Fireplace assembly

Then we are expected to assemble the box (frame). According to the calculations in the drawing and markings on the floor and walls, a metal profile of the required length is cut. Then, with the help of self-tapping screws and a screwdriver, it is assembled into a single structure, according to the chosen geometry of the false fireplace.

If the design plan provides for the presence of an arch above the visual firebox in the design, then to obtain such an arc, it is necessary to notch the profile in several places and bend it slightly.

It is worth noting that at this stage it is quite important to firmly connect the parts of the cut profile to each other, since the stability of the entire structure as a whole depends on this. Giving strength contributes to the presence of various, small in length jumpers.

Masters advise first to assemble the structure itself from the profiles and only then attach it to the wall and floor, since it will be inconvenient to mount individual parts in the reverse order of work, the screwdriver may simply not fit between the wall and any structural element.

But in any case, when assembling the frame, you should use the building level as often as possible to check the correct assembly.

Finishing and decorating the fireplace

This is followed by sheathing the frame with drywall. At this stage, the dimensions from the frame are transferred to drywall sheets, after which the necessary details are cut out. These parts should be fixed to the box with self-tapping screws.

Stage five - decorative trim. There are many ways to finish a raised fireplace using different materials.

The simplest and most economical is the simple painting of the entire structure. But it is worth remembering that the surface of the fireplace should be prepared before painting. Such preparation includes puttying and grinding surfaces.

The fireplace can also be simply pasted over with a self-adhesive film. This method is also quite economical. In addition, you can pick up a film with a pattern that imitates natural stone or brick.

One of the most popular types of finishes is decorative plastering. Dry mixes can be purchased at almost any building materials store, they are easily diluted and also easily applied to any surface.

If the fireplace is decorated with ceramic tiles, then do not forget about the pre-priming of drywall and the use of an auxiliary reinforcing mesh. It is attached to the surface of drywall and provides a strong screed between two contact surfaces.