Textured wall painting. Features and types of textured wall paint. Advantages of textured finish

This is boring and inherent only in the last century, but when they see textured wall paints, they instantly change their mind. This is because they create incredible effects on the walls before our eyes, which cannot be achieved using other means, or is so difficult that it completely loses any meaning as part of the repair.

Basic concepts and features of classification

Not everyone understands what textured wall paint is. In fact, this is a finishing decorative coating, reminiscent of most of the parameters. Its distinctive feature is its composition, consistency and structure. The last distinguishing factor makes it possible to distinguish among such paints structural ones, which have large particles or microgranules in their composition.

In their consistency, such compositions are more reminiscent of putties, but unlike them, no matter how fun it may sound, paints do not have to be additionally painted after application.

The basic components of such decorative compositions are the following natural and polymeric ingredients:

Acrylic;
Silicone;
silicate (sand).

Fillers in such paints can be a variety of additions, including:

Marble chips;
Microcapsules with dye;
Crushed gas silicate.

In addition, in addition, such finished compositions are divided according to the size of the largest inclusion - with fine, medium and large fractions.

The textured paint of the walls of the apartment is not suitable for everyone. In order to fully appreciate the created effect not by touch, but with your own eyes, you will need a large enough room. It must have at least one or . But this does not prevent the use of such paints for, and not only the interior of the room.

Advantages of decorative material

The decorative properties that textured wall paint gives the photo reflect especially brightly. It can be figuratively compared with clay, which the sculptor turns into a real masterpiece. But in addition to good external qualities, such paint has many side, but no less useful characteristics that can be effectively used.

One of the most important among them is the protective function. It implies multilateral protection from negative factors. The property of vapor permeability to such paints allows you to create. Water resistance, if it is incorporated by the manufacturer, allows you to maintain the appearance of the surface for a long time under the influence of dust and other pollutants, and some of these paints even perform a function that does not allow the room to lose temperature in the autumn-winter period.

However, wall decoration with textured paint requires some preparatory activities, which are carried out in several stages. The first stage is not always required and its implementation is implied only in the case when the walls of the room are being re-repaired after a long period of operation.

At the first stage, the walls are cleaned of old layers of decorative coatings and swollen layers of plaster, since their presence will contribute to peeling of the paint.

At the next stage, the walls are treated with primers. For most of these decorative compositions, it is sufficient to use only primers of the concrete contact type, which improve the quality of the base and increase its adhesive ability. Some also require the additional use of other primers, for example, with silicate fractions, which allow you to achieve a brighter effect using the selected type of decor. Each next layer of soil is applied after the previous one has dried. The application of the soil is carried out using a paint roller, and after it dries, they proceed to.

Application technology

Painting the walls with textured paint is not done with brushes at all, but with other tools that allow you to hold the thick consistency of the decorative mortar. These are spatulas and trowels. In addition, professionals can use process mechanization tools, for example, spray guns and similar pneumatic tools, provided that this is allowed by the paint manufacturer.

The decorative composition is supplied ready-made in tinted or white version. If desired, you can additionally add another dye in liquid form.

Tip: be sure to follow the dosage of the dye. Otherwise, your walls or parts of the same wall may get completely different shades and need to be repainted.

Some manufacturers distribute tinting agents in packaging that is convenient for dosage. If it is not provided, use a regular pharmacy syringe, the largest commercially available volume. Do not forget also at the same time that most dyes lose color significantly when the tinted base dries.

The thickness of the textured paint layer can vary from 7 to 15 mm. If the layer is smaller, the texture will not appear, and if the thickness is greater, then it will be more difficult to work with the composition. It is important to remember that working with such a composition will require good physical preparation. This is especially true in cases where the area or height does not allow it to be completely covered in one pass.

Application technique

After the composition has dried, if desired, the surface can be immediately sanded and the remnants of paint dust removed, or the surface can be pre-treated using additional decor.

post-processing

After the paint is completely dry, it can be further processed with special tools. They are tinting and protective compositions. The first are the same paints of a similar color, but of a different shade, varnishes and other tinting agents. They are applied to the surface in order to highlight or fully reveal an inconspicuous texture.

The greatest effect can be achieved with the use of tinting unusual shades. These are metallic -, golden and similar tones, as well as chameleon compositions. The latter change color depending on the type of lighting in the room. In daylight, they can have one shade, and under artificial lighting - completely different and not at all similar.

Tip: use your own imagination to the maximum. Do not be afraid to experiment, add sparkles if it is appropriate in the style of the room.

Re-tinting is applied using completely different tools - paint rollers, brushes, sponges, natural sponges and even rags, depending on what degree of coloring is required to achieve. Still fresh tinting can be washed off if it has a water base, creating decorative stains.

The final result can be fixed simply by drying the surface of the walls, or after drying, it is additionally treated with protective agents, for example, liquid wax.

Price category and purchase features

Whatever its type is textured wall paint, it will not be difficult to buy it. There are many similar products and it is produced not only by European, for example, Italian, Polish and German manufacturers, but also by domestic firms. They are not so popular, however, there are many high-quality analogues in their assortment.

Do-it-yourself decorative wall painting is an original solution that allows you to completely transform the interior of a room. There are various techniques that allow you to create completely individual surfaces. To perform such work, you can invite craftsmen, but the cost of the process will significantly affect the repair budget. Therefore, with strict observance of all the nuances, everything can be done independently.

First of all, you need to understand that the paint for special decoration is different from the standard options. Its use makes it possible to obtain non-standard visual effects. But with some diligence and skill, you can get an unusual result, even using standard options.

Currently, the most popular materials are:

Mother-of-pearl. The surface becomes like silk: depending on the angle of illumination, color shades change.
Velvet. A small fraction with a different color is specially added to their composition. Due to this, it is possible to obtain visual depth, as well as to create a soft velvet effect.
Mosaic. They can only be applied with a spray gun. Obtaining a decorative surface occurs due to the fact that the smallest bubbles, falling on the treated area, spread, forming a kind of textured inclusions. It is this method that allows you to most accurately imitate granite.

There are many more different options that have special inclusions in their composition that give a certain effect. There are also special textured paints (glazes and enamels) that perfectly fulfill their role.

If you work on the principle of "cheap and cheerful", then any widely presented variety of the product is suitable for use.

VIDEO: Creating the effect of silk or velvet using decorative paint (master class)

Applying decorative paint

The technology of applying decorative paint begins with the usual preparation, which is characteristic of all finishing and decorative materials.

Preparation process

The surface is completely cleaned of the old coating.
The walls are leveled with putty (after impregnation with soil), there should be no defects. It is a mistake to assume that a decorative coating will hide all the flaws. Sometimes it happens that they become even more noticeable.
The last stage of preparation involves the application of a primer, which is used to treat all areas.

At the preparatory stage, it is necessary to provide for the protection of furniture, windows, doors and other items from damage. This can be easily avoided if everything is securely covered with plastic wrap.

Advice! If possible, everything that is not involved in the performance of work is taken out of the room. This will not only save interior items, but also significantly facilitate the process.

Tools and fixtures are prepared separately:

brushes and roller;
a special device for obtaining the desired invoice;
a tray or any other container convenient for work;
protective clothing, gloves and goggles.

Tools and fixtures that you may need for decorative wall painting

You can create almost any decorative element with your own hands, but the most unusual options are used to facilitate the process. For example, a simple film can give the surface a relief that looks like a stone.

decorative coloring technology

Decorative painting of walls can be divided into two technological processes: simple and complex. But their general structure is almost the same. It lies in the fact that light and dark shades are used in the work. Initially, the main color is laid, and then, after drying, the second tone is applied.

Decorative wall painting involves applying two or more colors after a certain period of time, using a special technique.

On a note! Choosing the right moment for this procedure is considered a special skill. If you process it so that the finish layer blends with the previous one, but not completely, but forming a conditional border, then the effect will exceed all expectations.

A simple technique for obtaining a decorative coating

For this, both simple and special coloring compositions are used.

The most popular options for applying a decorative coating:

1. Applying a stencil.

Considered the easiest way. You can buy it at a hardware store or make your own. Especially fast is the work with adhesive templates. They are glued to the selected area, the roller or brush is impregnated in the solution to prevent streaks. The composition is applied evenly.

An interesting result can be achieved if you use an airbrush. In this case, the stencil must be made of a rigid material; it is not glued to the wall, but is held at some distance. The picture is blurry. This method is suitable when the base is not yet dry.

2. Usage.

The stores sell special devices for obtaining a decorative texture. The technology lies in the fact that the tool is impregnated with paint and carried out over the surface. The stripes should have different directions and not be too long. Boundaries cannot be created, so every previous parcel must be captured.

On a note! It is quite possible for everyone to make such a roller on their own. To do this, it is enough to wrap the cylinder with a cloth with knots.

VIDEO: How to apply decorative paint on walls using a texture roller

3. Applying a brush.

There are two options for using this decoration device:

The first way - the main shade is processed with a different color. Smears are carried out in different directions. The main thing is that the tool is not too wet.
The second method will require endurance. Two layers are applied to the walls: the main and the finishing. The second is allowed to dry a little. With a brush with stiff bristles, they begin to make movements from top to bottom along the entire height. Stripes with the main color showing through are obtained. This method can be applied to a single shade.

As a simple, but no less popular device, a foam rubber sponge can act, which seems to be stamped on the walls.

Sophisticated technique for obtaining a decorative coating

Complex options are distinguished by the fact that their implementation requires experience that will not spoil the surface to be painted, and this is quite easy to do.

1. Imitation of a marble covering.

Painting "marbled" requires special care.

The main shade is laid on the walls. Colors are selected close to natural material. Without waiting for drying, a new shade is applied with a wide brush. Movements should be directed in different directions, but not too chaotic.

The colors are mixed together. With a thin brush, arbitrary borders are formed. Finally, the paint is heavily diluted and some areas are blotted with a sponge to create a “smoke” effect.

Marble painting

On a note! An excellent result can be obtained even with a simple water-based composition.

2. Spray technology.

The method is quite troublesome, but very original. For work it is better to use solutions based on acrylic. The cover is completely unique. A feature of this option is that the base is sprayed with a different shade. This is done using a brush, the tip of which is slightly moistened with the composition. By choosing the desired distance, they get a different coverage area. But if you overdo it, then too much of it will be colored, and everything will merge.

Although decorative wall painting is not the easiest procedure, it will be an excellent solution in terms of decorating.

Textured wall paint is a popular finishing option in modern interior design. Unique patterns and unusual distribution of paint on the walls make the work unique. Thanks to the volume and relief of patterns, real compositions are created that combine the imagination and skill of the master. A huge plus is the ease of applying paint to the surface of the walls. Often it is used for interior work.

Decorative textured paint has the main distinguishing feature, which concerns the composition and appearance. Relief paint resembles a translucent substance, which has considerable strength. The basis is acrylic, but the secondary additives can be completely different.

Due to the resistance to external factors of various kinds, the product is used for external and internal work. To give a substance a certain color, you need to add color to it. The choice is represented by several hundred colors and shades.

How to apply textured paint becomes clear even to a non-professional, the instructions indicate all the stages of working with the product to the smallest detail. The mixture is applied with a corrugated roller, spatula or spray gun. You can also make textured paint with your own hands. Putty is mixed in a certain proportion with wallpaper paint. Sometimes a foreign filler is added: crumb or fine gravel.

It is very difficult to predict what properties a product made by one's own hands will have, so it is better to purchase a finished product.

Types of texture paint

Textured paints when painting manifest themselves in completely different ways. Many immediately ask themselves the question: how to paint so that the color is more expressive or there is no glossy sheen? Much depends not only on the method of application and the quality of the product itself, but also on the type.

Mizuri is a product whose base contains modified acrylic starch. Do-it-yourself smooth and textured surfaces are created.

Marseille wax- a practical base that is suitable for any type of room. It is used for walls as a protective coating against moisture and similar fumes. Such a base is covered again with wax.

Paint with quartz chips- a composition of aluminum particles, this also includes other natural fillers. This creates a variety of textures that are easily formed with a smooth spatula.

Atacama - the basis of this type includes quartz sand, which is responsible for the relief of the surface. This also includes a metallic component, which guarantees the appearance of a reflective effect. In general, the wall seems velvet.

You can expand the range of effects by coating the paint with varnish. Pastes with various additions are added to it. Due to this, the color and light perception of the surface changes depending on the change in the viewing angle, daylight, additional illumination.

On the video: how to make a texture roller.

Key Benefits

Textured wall paint has a lot of positive factors. The main feature is the combination of many functions that are aimed at maintaining the quality of the wall surface and the paint itself. Due to its positive properties, textured paint is used more often than any other finishing material.

The advantages of this type of finishing material:

It can be used in the premises of any functional accessory (residential, warehouse). This feature is possible due to the frost resistance of the components of the finishing material.
The basis of the substance is resistant to direct ultraviolet rays, which means that the color gamut practically does not change during operation.
The elasticity of the material allows it to be used even in new buildings. A strong substance does not deform during the shrinkage of the building.
The anti-fungal base makes the paint invulnerable to moisture. Moisture resistance allows the use of this finishing material in the kitchen, bathroom and rooms of similar functionality.
Does not absorb or transmit foreign odors that may form over time in the building.
Due to the viscous component, the paint practically does not accumulate dust and does not get dirty. If the need for wet cleaning arises, then chemicals and water will not damage the quality of the color, and the texture will remain intact.
For production, only environmentally friendly components are used, allowing the use of paint for surface finishing in a children's room or bedrooms, hallways or living rooms.
You can apply textured paint on any surface: brickwork, wooden base, plaster, tile base.
A wide selection of colors and textures that will easily reflect the main trends of any interior design.

Hypoallergenic properties are valued in this finishing material. This allows you to use it in any case and for any diseases of the respiratory system. The paint perfectly hides the imperfections and defects of the surfaces on which it will be worn.

Finishing work with paint

Textured wall painting is quick and easy. No special technologies are used in the process of painting and surface treatment. . Relief painting of walls is carried out in several stages:

1. Decorating the walls with paint begins with the preparation of the mixture itself, or rather, giving it color. The procedure is carried out by hand with the help of color.

A selection of colors

2. Suitable tools are selected and the workplace is prepared. You can't do without surface preparation. For interior decoration, the wall should be as flat as possible.

Wall surface preparation

3. Working with textured paint does not require special devices and fixtures. First, the base is applied with a conventional spatula. So, the substance is evenly distributed over the entire surface of the wall. Any spatula can be used: metal, rubber or wood. It depends on the skill of the one who "putty" the wall.

Applying paint to the wall

The most important stage is the decoration of the walls with textured paint, namely, the main pattern or texture is set. There are the following ways of applying textured paint:

Special granules are used that interfere with the base and form a pattern.
The pattern is set by a special roller that defines the pattern.

Lastly, re-coating with varnish, enamel, wax is carried out. It can be done in two days, since only after 48 hours the paint dries completely.

An additional coat is simply necessary, as surfaces finished with paint alone may be susceptible to some types of attack.

Secrets of use

In addition to the correct application of the mixture to the surface, additional nuances must be taken into account in the process of performing work. There are few of them, but they can affect the entire process in the field of repair work of this room:

Some types of texture paints cannot be mounted at low or too high temperatures.
Humidity in the room should not exceed the norm or, on the contrary, be too high.
The layer of paint should not exceed more than 1.5 cm in one layer.
The surface must be as smooth as possible, without the presence of sharp drops, the minimum degree of roughness.
The finished mixture is used for a certain period of time. If it has expired, then the quality of work performed and further operation is at great risk.
It is better to additionally use secondary coatings such as acrylic, wax, varnish. This will preserve the integrity, enhance the effects, balance the color.

It is important to pay attention to the instructions, which clearly indicate all the features of using this type of finishing material. Particular attention should be paid to the conditions in which only high-quality finishes should be produced.

When creating an exclusive interior of a room, textured wall painting is an excellent solution. Such finishing does not require special skills or sophisticated equipment, all work is carried out exclusively by hand, which allows you to show your imagination and implement design solutions. For painting, special textural and decorative mixtures or traditional compositions applied in a certain way are used.

Any traditional types of compositions can be used for painting, but the best result is achieved when choosing special options, which are divided into decorative and textural.

Decorative varieties include:

Mother-of-pearl. Imitate silk fabrics.
Mosaic. Due to the application with a spray gun, an interesting texture is formed.
Velor. The inclusion of hard particles gives the coating depth and softness.

Combined decor gives good results

But texture paints deserve special attention, which make it possible to obtain a relief surface. This category includes the following options:

Marseille wax. Allows you to create amazing custom structures.
Misuri. The resulting layer may have a well-defined relief.
Atacama. The necessary texture is achieved due to sand and metal particles in the composition.
Mixes with natural fillers. It can be sawdust or quartz chips.

Each type of composition gives its own texture.

To enhance the effect, varnish or wax is used.

On a note! In addition to creating a decorative relief, this method of painting allows you to hide minor wall defects.

Options for obtaining the desired invoice

To obtain an unusual relief, there are various ways in which a variety of tools and devices are used.

In general, any suitable materials and tools can be used for the job. Even with your hands you can create an interesting relief.

If desired, with simple tools, you can create genuine masterpieces on the walls.

Advice! It is recommended to test all created effects on a small area of plywood or cardboard, this will give an idea of the final result.

How to apply paint

To get it right, the process is broken down into three standard sequential steps: preparation, grounding, and painting.

Training

Action algorithm:

The surface must be smooth and without defects. If you want to enhance the visual effect, then the base is given the desired geometry in advance. An example is a small wall slope from top to bottom, which will be an excellent addition to horizontal straight or wavy stripes.

Primer application

Priming is an important procedure that ensures reliable adhesion of the applied composition. The deep penetration solution is laid with a roller, it is necessary to process all areas. The number of layers varies from 2 to 3, before applying the next coating, wait for the previous one to dry completely.

The application of primer is a mandatory procedure for any artistic finish.

It is better to choose the composition of a well-known and trusted manufacturer, this will guarantee a good result.

Coloring

To get beautiful textured walls exclusively with your own hands, you need to follow some rules, especially when using special texture compositions:

Preparation of the solution is carried out exclusively according to the manufacturer's instructions. It is not recommended to dilute such mixtures, only if necessary, but the amount of thinner should not exceed 1-2% of the total paint volume.
The surface is divided into conditional sections. Due to the rapid setting of the composition (15 minutes), the mixture should be applied to an area of no more than 2–3 m 2. This will create the desired relief.
The design is thought out in advance and the necessary texture is selected.

If any pattern is provided, then marking is performed before applying the compositions

General painting technology:

The base coat is applied first. For this, a water-based acrylic composition is suitable. The need for such a layer is determined individually.
Then the base is laid. The desired relief is formed with a suitable tool.
After drying, the surface is covered with wax or varnish.

There are 4 basic ways to apply texture to the wall

You can simplify the work by inviting a partner who will be responsible for the texture or application of the composition.

Should know! Lighting is an important detail. You should paint with exposed light sources, this will allow you to evaluate the resulting texture and, if necessary, make adjustments.

To get an excellent result, staining should be carried out in good light.

Methods for applying textured paint

There are various methods that allow you to realize the ideas of decorating a house or apartment.

This technology includes two methods:

With a regular comb, you can apply a very original pattern.

In both cases, at the final stage, the surface is treated with a transparent or matt varnish.

stone effect

This finish allows you to get a textured coating that imitates stone cladding. Scheme of work:

Each method must be adapted to a specific situation, this will allow not only to realize the idea you like, but also to achieve individuality.

VIDEO: how to apply textured paint on the walls with your own hands

The process of working with this material is not complicated, but it differs somewhat from the technology of applying conventional paint. Before proceeding with the use of textured paint, we recall the competent pre-treatment of the surface.

Wall preparation

Textured paint is applied in a thicker layer compared to conventional paint, therefore, the requirements for surface strength are also increased. It should be dry (no more than 2% humidity), not dusty, without foreign deposits.

All areas that impair adhesion, such as old cracked, crumbling layers of finishes, whitewash and other paint surfaces, should be removed. If the base coat is oil paint, the wall should be examined for peeling and swelling. Where the paint is well preserved, its surface must be sanded: for better adhesion, it should become matte.

If, after removing the base coat, you see an ugly wall with rough drops, it should be lightly puttied to even out the irregularities at least to a level of 2 mm. Large cracks are recommended to be reinforced with mesh.

The finished surface must be clean, dry, not "chalky" and without signs of mold.

Tools you will need:

Drill with mixing attachment.
Spatula or trowel.
Rollers to choose from: smooth, rubber textured, foam rubber, porous.
Decorative brushes.
The brush is flat.
Masking tape.

Wall putty

The quality of the study should be set, however, according to the situation: depending on the desired relief, the paint is selected and the thickness of its layer is set. The thinner it is, the more carefully the surface should be prepared.

Wall primer

Its purpose is to improve the adhesion between the wall and the paint. Refer to acrylic based materials such as Galamix-53 and Galamix-51 or Universal. If the coating crumbles easily, you can use the special strengthening primer "Profi" or apply 2 layers of the usual mixture. Areas affected by mold and fungus are pre-dried and treated with an antifungal primer, for example, Akkurat 115.

After drying, the primer creates a thin film on the surface, filling and leveling the pores at the base of the wall, which facilitates the application of the finish coat, increases its durability and saves on material.

Depending on the manufacturer, temperature and humidity in the room, the primer dries for about 6 hours, after which you can proceed to the finishing stage.

Painting walls with textured paint

Before use, mix the textured paint thoroughly, diluting it, if necessary, with water. Part of the water should be no more than 5-10% of the total mass, otherwise the beauty will become fluid and will not hold its shape. The paint is mixed manually or with a drill with a mixing attachment at low speed for no more than 2 minutes.

Note: material consumption depends on the manner of work, the chosen tool, the degree of preparation of the wall. To get an idea of the consumption, make a test area on the work surface.

How to apply texture paint:

The first step is to define clear structural boundaries for the top, bottom and trim width using masking tape. Also pay attention to the protection of surfaces that are not to be decorated.

Lighting is an important factor in the success of the work. It should be sufficient and as close as possible to future permanent lighting in terms of intensity and angle of incidence. The fact is that the relief of the paint is “read” precisely due to the direction of the light, and the right lighting will help create the desired effect on the wall. Both daylight and electric light should be considered.
If during work you make technological breaks, containers with paint at this moment should be tightly closed.
The paint is applied with a spatula, roller or spray. If you use a roller, then it should be smooth or with a hard short pile up to 1 cm long. The spray nozzle should be at least 3 mm in diameter. It is recommended to keep the roller in the same direction during the entire application stage in order to form a consistent pattern.

If you use a spatula, then the pattern will be applied in the next step, and not simultaneously, as is the case with a roller. A sufficiently large amount of the mixture is applied to the spatula, which is applied with a layer of 3 mm, and then, within an hour and a half, you have the opportunity to experiment with the texture, correct and add, change rollers and other tools for creating relief.
It is correct to start work from the corner of the plane to the opposite corner.
If necessary, painting with textured paint is carried out in two layers, while the second layer should be applied after the first has completely dried, that is, after 3-10 hours.
To avoid the formation of joints, work within the same plane should occur in one approach according to the “wet on wet” principle.
After work, the tool must be rinsed immediately with water.
The time for complete drying of the paint under normal conditions is 24 hours. It acquires final hardness and uniform polymerization only after 14 days.

Remember: the pattern and the resulting texture depend on the material of the roller and the speed of its movement along the wall.

Getting a drawing

Method 1. Textured paint is applied to the wall, as in the photo, using a trowel or spatula with a layer of 2-3 mm. Then the surface is treated with the selected texture roller, by rolling it from the bottom up.

Method 2. The paint is applied in the same way as the first one, an adhesive spatula is taken with teeth and a relief is given with wave-like movements. You can describe semicircles, waves, layer them and change direction.

Method 3. Relief "Bark beetle". Texture paint is applied in a thin layer of 1 mm using a wide spatula. Then, pressing it tightly against the wall, the excess mixture is removed, as a result of which the large components of the fractions leave a path behind them.

Method 4. The wall is pre-painted with paint to match the texture, or, conversely, with a contrasting color. In this case, when scratching, the bottom layer will show through. For example, lilac texture paint is applied to a yellow base. It is also worth experimenting with shades of the same color: light gray and darker, powdery and rich beige.

You can additionally decorate the finished textured wall by mixing an ordinary transparent varnish with a special creative paste. With the help of this technique, it will be possible to notice how the shade of the wall changes from a change in the angle and intensity of lighting.

Technical features of the paint:

It is forbidden to mix anything and add it yourself to the paint.
Do not apply the material to the facade in particularly hot or rainy weather, or under direct sunlight.
During street work, it is necessary to check the serviceability of storm and drainage structures.
Condensation must not form on the work surface.
The ambient temperature must be between +5°C and +30°C.
When working indoors, good ventilation should be ensured.

Tip: when painting the facade, it is better to choose pastel shades of texture paint: firstly, it is in harmony with the environment, and secondly, any bright color fades from prolonged exposure to light.

Prepare exactly the amount of material that is guaranteed to be enough for one layer. If you have more than one container, make sure that the color of the mixture is the same in all of them. Applying textured paint is a crucial step: use the tutorial videos and consult with those who already have experience in this.

__________________________________________________

Categories

Popular