Weber Vetonit LR + finishing putty 25 kg. Vetonit LR+ price per bag, buy with delivery in the online store of building materials.

Vetonit LR plus finishing putty is made using polymer glue. In most cases, such putty is used when finishing walls and ceilings in those rooms where low humidity has been recorded.

Often, "weber vetonit lr plus" is used to level walls, ceilings and other bases that have not previously been deformed for one reason or another. This is usually done before wallpaper is glued to the treated base or paint and varnish products are applied. Typically, such a putty is applied to gypsum, cement and cement-lime bases.

The layer thickness can be no more than 1-5 mm. When applying Vetonit LR+ finishing putty, a completely white surface is formed, in order to then produce the highest quality wallpapering or painting. It should be ensured that such types of finishing work are carried out exclusively in dry rooms. Otherwise, a positive result will not be achieved even by experienced professionals. Putty can be applied in a variety of ways to the surface to be treated. In practice, this is done manually or mechanically. Also, the presented product is very resistant to moisture, especially when it comes to a short period. If we take into account a layer thickness of 1 mm, then 1.2 kg / m² of consumables will be needed.

When using the finishing putty Weber Vetonit LR+, make sure that the selected base is very hard and completely dry, and free of grease stains. In addition, the entire surface should be checked for any other materials that cause significant adhesion to the substrate. During finishing works it is recommended to make sure that the actual temperature of the substrate is between +5°C and +30°C.

In order to prepare the solution yourself, you will need to take a plastic container and pour warm water with a volume of no more than 9 liters per 25 kg of dry mixture, which is subsequently added to the poured liquid. Next, mix the above components until a homogeneous mass is obtained. When performing this action, you need to use a construction mixer, a drill is also suitable. As soon as the solution is ready, it must be consumed during the first day.

Initially, the desired surface should be thoroughly prepared for applying a special solution to it. After that, the putty mortar after application is leveled with a steel two-handed spatula. If a small area is to be processed, then a metal spatula with a width of 30 cm is useful here. After the Vetonit LR + solution has been applied to the surface, it is worth waiting until it dries completely. This is followed by sanding and dusting. Then various decorative materials can be applied to the surface.

Finishing putty Vetonit LR Weber-Vetonit LR+ 25 kg

Weber-Vetonit LR+ putty is a finishing putty for interior ceilings and walls. The putty is made on the basis of a polymer adhesive binder of perfectly white color.

Finishing putty Vetonit LR Weber-Vetonit LR+ 25 kg:

• before wallpapering
• before painting.

Advantages of Weber-Vetonit LR+ putty:

• Super plastic.
• Blends layers perfectly.
• High quality and application efficiency.
• Absolutely white.

Characteristics of Weber-Vetonit LR+ putty:

Foundation preparation:

• The base must be clean, solid and strong.
• Windows and other untreated surfaces must be carefully protected.
• Substances that weaken adhesion such as grease, dust, etc. must be removed.

Preparing the mixture:

• Gradually pour a bag (25 kg) of dry mixture into a container with 8 - 9 liters of water, while stirring. The recommended water temperature is + 20°С.
• Mixing should be done with a drill with a nozzle for 3-5 minutes. Let the solution stand for 10 minutes. Then stir the mixture again before use.
• The mixture is suitable for use 1 day after mixing with water.

Application:

Apply the mixture manually with a steel spatula or spray mechanically. The previous layer of putty must dry before applying the next layer. Grind the working seams and the surface after sufficient drying after 1 day. The hardened mixture is ready for painting or wallpapering.

Vetonite is one of the types of building powder mixtures used for finishing, finishing and construction work. Excellent quality made this brand popular. The main purpose is work at the final stages of leveling surfaces. Putty Vetonit is able to make the walls perfectly smooth, hide cracks and cracks.

Packaging example "Vetonit 25 kg"

The type of mixture depends on the components - gypsum, cement, polymer. They are able to cover walls and ceilings of various types - drywall, concrete, wood, and more.

Most solutions are universal, used for interior and exterior decoration.

Features of the brand Vetonit:

• Natural, eco-friendly composition;
• It is distributed easily, without visible differences;
• Powder structure makes surfaces smooth and even;
• It is polished without problems, leaving no dust;
• Provides additional sound insulation;
• Applied manually or mechanically;
• Economically spent;
• Sold in reliable three-layer packages of 5 and 25 kg.

On the building materials market, Vetonit putty is offered by the manufacturer in a large assortment:

1. "B" (consists of cement) - for rooms with a high percentage of humidity;
2. "VX" (base - cement) - a waterproof look, used in the processing of ceilings and facades;
3. "T", "KR" - used in dry rooms;
4. "LR Fine", "LR +" - for operation in conditions of normal humidity;
5. "VH" (base - limestone, white cement) - for finishing puttying (concrete, brick, plastered walls and ceilings).

Finishing putty Vetonit LR+ (25 kg)

Products are presented on the market of building materials in a package weighing 25 kg. It consists of rare white limestone and high-quality polymeric materials.

Putty is intended for leveling surfaces in dry rooms at the finishing stage. It turns yellow with prolonged exposure to moisture, it is applied to clean and treated surfaces of various types.

To create the ideal effect, you need a solid, clean (from dirt, grease) and dry workplace.

By mixing dry Vetonit LR+ with water, a thick homogeneous mixture of white color is obtained. The finished composition is used per day.

Putty is applied in a layer of 1-5 mm. For a large area, 1 mm is recommended, and for a smaller area, 3 mm.

Apply putty with smooth movements from the bottom up. It is necessary to maintain room temperature from +10 to +30, to ensure ventilation of the room.

Vetonit LR (25 kg)

Vetonit LR (25) is based on polymeric substances. It covers plastered and concrete surfaces.

The task that the finishing putty performs is the processing of walls / ceilings of various types. It is distributed mechanically or manually. For independent work, choose a wide spatula, with its help regulate the thickness of the layer.

Vetonit LR levels surfaces without any problems, preparing them for further processing, superimposed in one layer.

This composition is not used for leveling floors, is not used in places with high humidity.

Vetonite VH

The properties of this finishing putty are not affected by the moisture factor. Area of ​​use - concrete, brick and facades.

This composition does not lie on surfaces that are treated with water-soluble and lime products.

The wall / ceiling is pre-cleaned of contaminants. Preparation of the solution: water is poured into a clean container and putty is poured, whipped for five minutes with a powerful electric drill and settled for three hours.

The finishing composition is applied with a spatula of standard sizes with smooth movements. The remaining solution can be reused. If the application is carried out in several layers, you should wait for each to dry. It takes 2-3 days.

Facade putty is applied in two layers, each of which is not thicker than 3 mm. After drying, the imperfections are rubbed with grinding materials.

Vetonit KR

It is used at the finishing stages of repair in dry rooms. White solution, composed of organic substances. Can be applied alone or by mechanical spray.

Suitable for puttying organic surfaces - drywall.

Not suitable:

• For work with floor coverings;
• When gluing tiles;
• In rooms with a high level of humidity;
• For sealing seams.

Execution steps

To achieve the desired effect, the surfaces are treated with an acrylic primer.

The solution is prepared, taking into account the consumption - for a layer of 1 mm it is 1.2 kg / m². The contents of the bag (25 kg) are mixed with water (8 l) using a drill with a nozzle, taking into account that the powder is poured into water, and not vice versa. To obtain a homogeneous thick mass, beat for 10 minutes, then leave for 20 minutes and repeat stirring . You can use the finished mixture at a temperature of +10 0 for a day.

For finishing work, two spatulas are taken - one with a width of 70 cm, and the second - 30 cm. The putty is applied in one or two layers, provided that each is completely dry.

If the room has normal humidity and temperature, there is ventilation, the layer dries out in 2-3 days, after which they proceed to decorative surface finishing - painting, wallpapering.

Puttying ceiling and wall structures

The sequence of actions for the repair of the ceiling:

1. First, a primer suitable for the given surface is applied. Do this carefully with a roller. After all the places where the composition has got, they are thoroughly cleaned.
2. The bucket is filled with water and the putty is poured out, mixed with a drill. With a narrow spatula, the solution is transferred to a wide one, then distributed over the area of ​​\u200b\u200bthe ceiling. The first layer is the starting putty, and the second is the finishing one. The result of the repair as a whole depends on the quality of the application.
3. Ceiling sanding.

Wall finishing steps:

1. The walls are stripped of old finishes.
2. Cover with a primer and wait for it to dry. Cracks and irregularities are plastered. After the surface is treated with sandpaper and re-rolled with a primer.
3. The number of layers of putty depends on the type of decorative finish. The composition is distributed neatly, with smooth movements from left to right.
4. When the putty has dried, it is cleaned with sandpaper, then the dust is removed. The wall is primed again before the next layer of finishing putty. After its application, the actions of grinding and priming are repeated.
5. Start wallpapering or painting.

The number of types and brands of finishing mixtures is huge. At different stages of alignment, its different types are used - starting, finishing.

The rules for preparing the solution are indicated on the package, follow the manufacturer's recommendations. After calculating the consumption, they take a bucket, pour the right amount of water into it, add the contents of the bag and knead for several minutes with a construction mixer. Now you can get to work, remembering that the mixture thickens during the day and it is impossible to extend its elasticity, you will have to knead a new one.

Working with the brand Vetonit

Ready Vetonite is applied to the surface by spraying or manually. Spatulas with a blade width of 30 and 15 cm are recommended. If applied at an acute angle, the layer will be the desired thickness and uniform. To begin with, they take a small amount of the solution on a narrow spatula, then distribute it on the second one.

In the process of work, the finished mixture is constantly mixed with spatulas - this improves its consistency.

In contact with

Vetonit LR Plus is used when the final leveling of the wall surface is required. Vetonit is a well-known brand trusted by both builders and end users. And the finishing putty of this brand combines convenient functional qualities and an affordable price.

The specified material is intended for work in rooms with a normal level of humidity.

Material Features

Putty of this series is used in the preparation of walls. This is the finishing material, after which the walls are painted or pasted with wallpaper, etc.

Among the main features of the material, it is worth highlighting:

• Plastic. Thanks to this quality, it is easy to work with it, the material fits well on the walls;
• Perfect white color. At the same time, it is applied in an even layer. This allows you to stick thin and light wallpapers. The material will not shine through and affect the interior;
• Application thickness. The mixture is applied in a thin layer and dries within one day. The optimal layer is considered to be 5 mm, no more. Otherwise, the mixture will dry out for a long time.

It is allowed to use Vetonit LR Plus on any type of wall surface: it can be drywall sheets, a surface plastered under a lighthouse, and so on.

Things to remember

It should not be forgotten that this material cannot be used as an adhesive for certain items. Meanwhile, many use it in this capacity, mindful of its high consumer qualities. Often, skirting boards for the ceiling and other light objects are glued to Vetonit.
Meanwhile, Vetonit LR Plus does not have moisture resistant qualities. Therefore, it is not suitable for use as an adhesive mixture.

Material Advantages

The main advantages of Vetonit LR Plus finishing putty are its working qualities. So, if minor irregularities remain on the wall, they can be removed by processing with an ordinary grinding bar.

In addition, the prepared mixed mixture retains its qualities and remains usable for several days. Therefore, if the work is suspended, then it can be safely resumed after 3 days.

Vetonit LR+. Vetonit LR+ Plus 25kg.

Price 595 rubles.

Finishing putty on a polymer binder for walls and ceilings inside dry rooms.

Areas of use

Walls and ceilings inside dry rooms. Suitable substrates: all smooth surfaces made of mineral materials; surfaces leveled with putty Vetonit L, V, TT, TT Light or Perlite putty; plaster surfaces; plasterboard walls and ceilings (but not for grouting plasterboard boards). It is also possible to spray ceilings made of other boards, such as particle boards or porous fibreboards.

Attention! The mixture is not waterproof. The material is not suitable for leveling floors, for grouting drywall boards, or for use as a base or adhesive mortar under tiles.

Specifications:

The substrate must be clean, solid and dust-free. Substances that weaken adhesion such as grease, dust, etc. must be removed. Windows and other untreated surfaces must be carefully protected.

Attention! The base must be dry, no leaks and excessive moisture content in the structure is allowed, as this may cause discoloration of the leveled surface.

Mixing

A bag of dry mix (25 kg) is mixed with 8–9 liters of clean water. Mixing is carried out with a powerful drill with a nozzle for 3–5 minutes. For better dissolution of the binder, the mixture is allowed to stand for about 10 minutes. After slight re-mixing, the mixture is ready for use. The mortar mixture is suitable for use within about 2 days from the moment of mixing with water. Unused mortar mixture must not be left in mixing containers, hoses, etc. equipment for more than 2 days (eg weekends).

Attention! Do not pour the mortar mixture into the sewer, so as not to clog the pipes.

Completing of the work

The mortar mixture is applied mechanically by spraying or manually using a steel spatula. For full leveling use a steel trowel 80 cm wide, for partial leveling a smaller steel trowel 30 cm wide. Excess mortar mixture is removed and reused. The ceiling after spraying putty can be left without further processing. If leveling is performed in several layers, it is necessary each time to make sure that the previous layer is completely dry (within 1 day). The dried surface is sanded with fine sanding paper after each layer.

Tool cleaning

The working tools and equipment are washed with water immediately after work is completed.

Surface Finishing and Additional Recommendations

The leveled and dried surface can be painted or wallpapered according to the wallpaper or paint manufacturer's instructions.

If dirty spots appear, the surface can be carefully wiped with a damp sponge or piece of cloth. If the stains do not go away, the surface can be re-covered with putty.

Helpful Hints

To improve adhesion to painted surfaces and to improve the wear resistance of the material, 10% mixing water can be replaced with Vetonit Dispersion (approx. 0.8–0.9 l of dispersion/25 kg of dry mix). Before starting the leveling work, it is necessary to make sure that the adhesion of the old paint to the substrate is good.

Packaging and storage

Putty Vetonit LR Plus is supplied in 25 and 5 kg bags. Shelf life in a dry place in closed packages is approx. 12 months from date of manufacture.