How to determine your coordinates in Minecraft. How to determine your coordinates in Minecraft How to enable coordinates in Minecraft 1.8

Many Minecraft players have wondered How to determine your coordinates in Minecraft, as this allows not only to remember and determine in which direction the house with the bed is located, but also to record the coordinates of interesting places, especially if the whole process of the game consists of traveling and building new houses.

Minecraft keeps track of your location in the game world using a coordinate system. In the PC versions of the game, the coordinates are hidden in the debug menu, while on the console versions, the coordinates are available when you open the map. But if you play Minecraft PE, you will need a third-party application to find your coordinates, since Minecraft PE does not have a map or debug screen.

Click on the Debug button.

You will see relevant information. Typically, this will require pressing F3 , although this is not always the case:

Desktop PCs - F3 .
Laptops and Macintosh - Fn + F3.
Newer Macs - ⎇ Alt + Fn + F3 .

Find the coordinates on the debug screen.

There will be a lot of different data, so be careful - simple coordinates are marked as "Block", and detailed ones are marked as "XYZ." The line "Facing" indicates which direction your character is currently facing.

Understand coordinate data.

The center of this coordinate system is the block you started playing from. The "Block" line displays three numbers, three coordinate values (XYZ) without labels.

"X" is your location east or west of the starting block (latitude).
"Y" is your location at a level above or below the starting block (depth/height).
"Z" is your location north or south of the starting block (longitude).

Get familiar with the coordinates. These will be your coordinates. Ask a question about Minecraft 5. How to find out the coordinates? Find your coordinates. 6. How to see the durability of items and NID? how to find out your coordinates in minecraft pe - 14 Skins for Minecraft PE. Servers. Opening the game again, you will find yourself at the point described by those coordinates.

In new versions, the debug screen opens only partially - this is the basic setting. All players start playing with a card - it is in their inventory. They will change in real time! Don't forget to subscribe to the channel! And like it, I tried and for the first time I filmed *_*= VK group - There is info about the coordinates.

Z" is your location north or south of the starting block (longitude). Please note that on iOS devices, this will first need to be jailbroken. In order for a third-party application to download data about your game world, the game must be turned off.

All about Minecraft

Minecraft keeps track of your location in the game world using a coordinate system. See how the coordinates change as you move. The starting block coordinates will most likely be X,Z:0,0. The center of this coordinate system is the block you started playing from. This will help you better understand how the coordinate system works. The "Block" line displays three numbers, three coordinate values (XYZ) without labels.

Click on the Debug button.

You will see relevant information. Typically, this will require pressing F3 , although this is not always the case:

Desktop PCs - F3 .
Newer Macs - ⎇ Alt + Fn + F3 .

The center of this coordinate system is the block you started playing from. The "Block" line displays three numbers, three coordinate values (XYZ) without labels.

"X" is your location east or west of the starting block (latitude).
"Y" is your location at a level above or below the starting block (depth/height).
"Z" is your location north or south of the starting block (longitude).

Content:

Steps

1 PC/Mac

1 Open the debug screen completely. In new versions, the debug screen opens only partially - this is the basic setting. You can change it through the Options menu.
- Open the menu Options - "Chat Settings." Disable "Reduced Debug Info."
2 Click on the Debug button. You will see relevant information. Typically, this will require pressing F3 , although this is not always the case:
- Desktop PCs - F3 .
- Laptops and Macintosh - Fn + F3.
- Newer Macs - ⎇ Alt + Fn + F3 .
3 Find the coordinates on the debug screen. There will be a lot of different data, so be careful - simple coordinates are marked as "Block", and detailed ones are marked as "XYZ." The line "Facing" indicates which direction your character is currently facing.
4 Understand coordinate data. The center of this coordinate system is the block you started playing from. The "Block" line displays three numbers, three coordinate values (XYZ) without labels.
- "X" is your location east or west of the starting block (latitude).
- "Y" is your location at a level above or below the starting block (depth/height).
- "Z" is your location north or south of the starting block (longitude).
5 Move around and watch the "Block" values change. This will help you better understand how the coordinate system works. If "X" is less than zero, then you are west of the starting block, if "Z" is also negative, then you are north of the starting block.
- You'll most likely start at X,Z:0,0 (unless you're underwater), and your starting Y value will be around 63 - sea level in the game.

2 Console versions

1 Open the map. In console versions of Minecraft (Xbox, PlayStation, Wii U), the coordinates can be seen along with the map. All players start playing with a card - it is in their inventory.
2 Find your coordinates. Actually, you don’t need to look for them for a long time - look at the top of the open map, these cherished X-Y-Z will be there.
3 Understand coordinate values. The center of this system is the block where you started the game. "X" is the latitude, your location is east or west of the starting block. Z - longitude, location south or north of the starting block. Y, respectively, denotes the height relative to the lowest layer.
- The starting block coordinates will most likely be X,Z:0,0. If 0.0 is underwater, then your starting block is somewhere nearby.
- The initial value of Y depends on the height at which you spawned at the beginning of the game. Sea level is Y:63.
4 See how the coordinates change as you move. They will change in real time! If "X" is greater than zero, then you are east of the starting block. If "Z" is greater than zero, then you are south of the starting block.

3 Minecraft PE

1 Download a third party app. The Minecraft PE version does not provide access to a map that could be created using in-game tools, and there is no other way to check your coordinates either. Accordingly, you will need a third-party application. Please note that on iOS devices, this will first need to be jailbroken.
- Android - Download PocketInvEditor from the Google Play Store.
- iOS - Download iMCPEdit from Cydia. In order for the application to work, the device will have to be jailbroken (hacked).
2 Close the game if it is running. In order for a third-party application to download data about your game world, the game must be turned off. Open the running apps management screen and turn off Minecraft PE.
3 Open the app and select your game world. You will see a list of your saved game worlds, select the one you need and, if it does not load, check again if you have definitely turned off the game.
4 Click on "Edit World Info." This way you will see data about your game world.
5 Find the line "Player location". These will be your coordinates. Opening the game again, you will find yourself at the point described by those coordinates.
6 Get familiar with the coordinates. There are three coordinates in Minecraft PE: X, Y and Z.
- "X" is latitude. If X is greater than zero, you are east of the starting block, if less, you are west.
- "Y" - height. So, 63 is sea level, and 0 is the very, very bottom.
- "Z" - longitude. If Z is greater than zero, you are south of the starting block; if less, you are north.

Mod Battys Coordinates Plus (Mod Accurate Coordinates) for Minecraft 1.11.2 1.10.2 helps players to accurately determine the location of the characters that players control without having to use the F3 key (this means debug screen: the function will allow players to find out all the information in the working state in Minecraft, personal computer, information, character, location, etc. ). After installing Batty's coordinates plus mod, players can choose from six main modes that this mod provides players with helping them find out the information they need.

If you've ever used -debug screen, you might know some useless information that appears on the debug screen. Apart from information about the location and biome of the character, the rest will be superfluous. Because the debug screen was programmed and developed by the game design team of the mojang computer company, they need the debug screen to know exactly the tasks of minecraft, as well as how to help coders/moderators in the process of programming the mod and some related stuff without installing a third party mod.

For average players, apart from location and biome information, almost all complete information is not essential. However, with Batty Coordinates Plus, you can choose from six modes; fundamental white screen mode, the rest modes let the players know the places, dates, with the new world created, route, biomes, blocks information, means only some necessary information for the players. Batty coordinates plus requires forge mod loader and minecraft 1.8.9/1.9.4/1.10.2/1.11.

Categories

Popular