How to make a track from tires with your own hands. Do-it-yourself garden path from old tires. Walkway made of rubber rectangular tiles on a concrete base

He knows the value of good garden paths. It is very unpleasant when you walk with full buckets in your hands and there is no stable surface under your feet. It resembles an extreme attraction, which may well end up in a hospital bed. From what only craftsmen do not make garden paths: from concrete, wood, paving slabs and even from plastic bottles. All of them have their drawbacks.

I want to offer you to make a garden path with your own hands from old tires. I warn you right away that you will need a lot of tires. If you have friends who are motorists, then feel free to involve them in business. The final result will exceed all your expectations, since you will walk along such a path without fear of slipping, falling and getting bruised with fractures. So, in order to make a garden path from old tires, you will need to take:

tires;
- wooden slats;
- sharp thick knife;
- a hammer;
- nails;
- resin;
- hacksaw;
- roulette.

The most difficult process is cutting out the working surface of the tires.

Here is the most difficult one to start with.

When all the tires are prepared in this way, you can begin to prepare the wooden slats. In order for the slats not to rot, they must be pitched.

We lay out the prepared slats on the path, and on top of them we place strips of tires. Then the matter remained small - to nail the rubber strips to the rails.

Garden path from old tires, ready!

If you are accustomed to approach everything with responsible efficiency, then for greater reliability you can deepen the slats a little into the ground, then you certainly will not sway on the go.

When arranging a summer cottage, there is often not enough money for new building materials. Most owners have learned to make do with improvised means. And if you add a little skill, then unusual functional products are obtained from unnecessary things.

One such solution is garden paths made from car tires. It is a durable material that does not require special care. And the creation of a path from it is within the power of a person without building skills.

Pros and cons of using

Among the advantages of using tires are the following:

1. Material reliability. The tires are made from high quality durable rubber. Even when worn out, they do not lose their properties.
2. Durability . Such a trail will serve for years without the need for repair.
3. Rubber is slip resistant. The relief surface allows you to calmly walk on them during heavy rain, frost.
4. Not afraid of temperature extremes, high humidity.
5. Does not deform under high mechanical loads.
6. Requires minimal care. It is enough to periodically rinse the surface of dirt from a hose or sweep away debris with a broom.
7. If necessary, the track can be easily moved to another location..
8. There are almost no costs for such a path.. You do not need to buy material, and each owner has the necessary tools.
9. The tire does not rot and dries quickly.
10. Ease of installation.

Photo: future path from a truck tire

But there are a number of disadvantages to be considered as well. Among them:

1. The need for a large number of tires. Even for a small garden path, you will need more than a dozen of them. But if you agree with the employees of the service station for a nominal fee, then you will have a sufficient amount of rubber in stock.
2. Unaesthetic appearance. Of course, the beauty of a tire path cannot be compared with natural stone. However, for owners of summer cottages, for whom practicality, durability and price come to the fore, the attractiveness of the track is not so important.
3. Weak rubber ductility. Before mounting the product from the tire, the material should be straightened, which will take a little work.
4. When creating a path, obligatory gravel is required. Otherwise, the path will soon simply go into the ground.

Users often search:

How to do the styling with your own hands - we disassemble step by step

First you need to prepare the necessary tools and fasteners:

• a sharp knife or a jigsaw;
• slats made of wood;
• a hammer;
• hacksaw;
• roulette;
• shovel;
• axe;
• nails (at least 7 cm long).

The number of tires depends on the width and length of the alley. To make a neat garden path from old tires, it is important to carefully approach each stage of creation. Let's analyze them in detail:

1. Preparation of working material. The rim of the car tire should be carefully separated from the tread tape. The main tool is a jigsaw. Many craftsmen suggest using a sharp knife, constantly wetting it with grease, but it will take more time and effort. The rim is separated strictly along the tread edge. So the cut rubber is easier to straighten. The jigsaw should be driven around the circumference of the tire, not across it.. This measure will prevent the blade from dulling or breaking the tool.
2. Ribbon Formation. To do this, the protector is cut with a knife or an ax. The number of lanes depends on the selected track dimensions.
3. Creating a solid foundation for the path. The trench is dug to the depth of the shovel bayonet. The bottom is rammed. A layer of crushed stone or gravel falls asleep. Top can be filled with sand-cement mortar. But this is optional. For non-rocky soils, gravel bedding will be sufficient.
4. Alignment and fixation of tapes. It is carried out using wooden slats, pre-treated with resin. The edges of the rubber are straightened, nailed to the rails.

For paths several lanes wide, a gap of up to 2 cm is left between the tapes. Rainwater will not accumulate on the surface, and the grown grass will strengthen the position of the path on the ground.

Another interesting option is the creation of a staircase from tires on a personal plot. Suitable for cottages that are on a slope. Tires are slightly recessed into the ground and are laid from the bottom of the soil to the top. Soil is poured inside. And so that the steps do not slip during the rain, a thin layer of gravel is poured on top.

Thematic material:

We make curbs from tires

From this material, small fences of different heights are obtained. Often, used tires are fenced off from the rest of the yard in a flower bed or a children's playground. It is enough just to cut the tire in half with a jigsaw or knife, dig it into the ground with the cut off side.
And to make the borders look beautiful, they should be painted, applied with interesting patterns, drawings.

Photo gallery of finished tracks and border

We offer you to look at different ways to use tires as a material for garden paths and curbs:

Photo: great use of old rubber

As it turned out, even such unnecessary products as old tires turned out to be useful. And what's even nicer is to save a significant amount on the purchase of building materials and ennoble the summer cottage almost for nothing.

Many people, having bought a summer cottage, sooner or later face the need to equip the site. In particular, with the manufacture of tracks. Today, there are many ways to accomplish this task. The range of choices is great. These are various concrete and asphalt tiles, and broken bricks, and expanded clay, etc. Everything depends on the price of the issue.

You can make inexpensive, almost eternal, country paths on your own and, moreover, almost free of charge. For their manufacture, old car tires are suitable. To be more precise, only a treadmill is used from the tire itself - its tread .. For country paths, it is better to use tires from trucks. They will need much less, and the width will turn out more. Thus, you can significantly save time spent on arranging your site.

The process of "extracting" the necessary material from tires is as follows.

It is necessary to cut (separate) the tire tread from the sidewalls with a sharp knife. The cut line is shown in the figure. In order for the knife to easily cut rubber, it must be periodically dipped in oil or soapy water, and some kind of wedging device (spring or mount) must be inserted behind the knife itself. After separating the treadmill from the sidewalls, we get a rubber ring that needs to be cut, and thus get a rubber band. This tape will be our covering for country paths. When a sufficient number of such rubber bands is obtained, we proceed to the installation. To lay a country path of sufficient width, you may need from three to four such tapes.

We adjust the tapes along the length and nail them along the edges with nails to a wooden bar or board. We leave a gap of 1-2 cm between the tapes. In the future, grass will grow in this gap, which will keep our paths from lateral displacements. Tapes should be laid on moist soil. So they quickly "lie down" and bond with the ground. The wooden blocks holding the rubber bands are recessed into the ground so that there are no bumps. That's the whole process. Landscape design lovers can use not a whole tape, but individual pieces. A single tape can be used to lay paths between the beds. Here already at whom what imagination. The main thing would be the desire, and the material for manufacturing can be found in almost every city dump or along the roadsides.

A. Vinogradov.

From DelaiSam.ru:

The easiest way to get old tires in tire shops. Their masters will be just happy to get rid of deposits of old tires.

In terms of garden design, the use of such a coating for paths is, of course, doubtful, for example, between a flower garden and or flower beds. But to cover with such tapes a parking lot for a car, an entrance path to a site, a utility yard, a place for washing a car, inter-bed passages, etc. will be very helpful. The material is almost eternal, not slippery and looks decent.

Let me express one more application for such "ribbons" from old tires.

In spring or autumn, i.e. during the thaw period, many summer residents have difficulty getting to their summer cottages.

Now, if you line the most problematic places on the road with such tapes. Yes, and it's easy - to have a couple of such tapes in the trunk, in case you get stuck ... Usually, in such cases, fussing with a shovel begins, slipping all sorts of branches, boards, grass. Rubber on rubber, and even tread to tread, guarantees almost caterpillar patency.

And quite enough exotic use of old tires is roofing material! Have you seen classic tiles? These are, in general, completely identical half-cylinders, some of which are laid with a chute down, and some with a chute up. As a result, water flows down the gutters from the roof.

Therefore, if you cut the tire, as shown in the figure, we get a gutter, 1-1.5 meters long! What prevents us from nailing this gutter to the crate, with the tray down, and on top of it - the same, but with the convex part up?

As a result, we get an almost eternal roof.

Well, we will not cover the house with such a roof, but here are the outbuildings, a woodshed, a shed, etc. - why not! It's just free roofing!

A summer cottage is exactly the place where many old and unnecessary things, after alteration or restoration, begin their new life. This includes furniture, kitchen utensils, and clothes. Find application on a suburban area and unnecessary car tires. What skillful summer residents do not make of them: swings, flower beds, sandboxes and even small pools. Today we will talk about another option for using old car tires - arranging paths in the garden with their help.

The main advantage of rubber on car tires is its high quality. Even the old tire does not lose its increased resistance to external influences and remarkably tolerates both various kinds of precipitation and the influence of low and high temperatures.

• That is why the garden path from the car tire will not crack during the winter frosts, will not get wet from the spring rain and will not deform in the hot summer.
• Having spent time once, you will provide yourself with a convenient and reliable covering for paths in the garden for several years. Another advantage of the tire track is the ease of maintenance. It is enough just to sweep away the garbage, pour water from a hose or watering can - and your garden path again shines with cleanliness.
• Rubber does not absorb moisture and dries fairly quickly, so even after a heavy downpour, you will have a dry coating in the garden very soon.
• Car tires are quite slip resistant, it is almost impossible to slip and fall on them, but even if this happens, rubber will significantly soften the blow and reduce possible injury.
• Well, the most important advantage of the rubber track is the ease of creation.

If you, after evaluating all the positive qualities of rubber, decide to use car tires when arranging the tracks on the site, you have two options: make a coating from old car tires or use rubber tiles for this purpose, which is a product of processing those same tires.

Tire tracks

To create a garden path, we need old car tires. It is desirable that they all be the same size. The amount needed will depend on the total length of the tracks you plan to cover. If the paths are wide enough, truck tires can be used.

In each tire, we will need to make a separation of the treadmill - tread (pictured above). To do this, you will need a sharp knife, some oil or soapy water, and some object as a wedging device.

• With a knife, gradually cut off the sidewalls on both sides of the tire in a circle. To make it easier for the knife to cut through fairly dense rubber tires, it should be regularly dipped in a container of oil or soapy water.
• Behind the knife it is necessary to insert our wedging device. It can be an adjustable wrench, a mount, or just a wooden block.
• After cutting off the side parts of the tire, we got a rubber band.
• Cutting it, we get a coating for our future track.
• Having collected the required number of protectors, we proceed to laying the canvas. Depending on how wide the garden path will be, two to four lanes may be needed at the same time.
• We align the tapes along the length and nail the edges to a wooden board or bar, as shown in the photo. The distance between the tapes should be 1-2 centimeters. Grass will grow in these gaps over time. It perfectly keeps the garden path from shifting.
• In places where the wooden parts of the tracks will be located, it is necessary to dig small indentations. This will help to avoid tearing the edges of the rubber cover.

On this, the installation of a garden path made of tires can be considered complete.

Rubber tile walkways

And now let's talk about the second option for arranging paths in the garden. To do this, we need a special rubber tile. The material for its manufacture are all the same used car tires.

To begin with, they are crushed, and then tiles of various sizes, thicknesses and colors are formed from the resulting crumb rubber. Such a coating has already been appreciated by many summer residents, and it continues to gain increasing popularity.

Rubber tile retains all the properties that a car tire has. It is clear that the purchase of such a coating will require additional costs, but such a garden path will look much more beautiful than just tire ribbons.

A wide range of tile shapes and colors will allow you to create paths that are most suitable for decorating your site.

Installation of the coating is not particularly difficult. The design of the tiles provides for fastening with bushings or special locks.

The only thing to consider when buying is the thickness of the tile. Thinner tiles (up to 20 mm) require preliminary creation of hard surface paths in places of future paths.

It could be

• cement strainer
• asphalt pavement
• wooden flooring.

Existing coatings are also suitable as a basis.

• To do this, it will need to align all the recesses and bulges on it and close up the cracks and chips formed under the influence of external factors.
• The base surface is thoroughly cleaned and treated with a mixture of acetone and polyurethane adhesive in equal amounts.

A thicker coating does not require such thorough preparatory work. If the thickness of the tile is more than 30 mm, it is allowed to lay it directly on the ground or on a 5 cm layer of sand.

If you want your walkway to last much longer and still look good, prepare a three-layer base before laying the tiles.

Components of the foundation

• compacted soil as the first layer
• rubble
• sand and cement in a ratio of 3:1.

When laying rubber flooring without preparing the base, the water drains naturally, so there is no need to create artificial drainage. You can complete the work by installing rubber curbs. They will not only improve the overall appearance of the tracks, but also serve as their additional fixation.

Rubber tracks are a great way to ensure convenient and safe movement around the site at no significant cost. For rubber crumb tiles, see the video.