Show your child how easy it is to make a phone out of cardboard, plastic bottles. The phone stand is made from similar waste materials.

How to make a home phone from a plastic bottle?

But it will not be just a toy, the device includes an air freshener in granules, so it will also smell delicious.

To create this device, take:

• 500 ml plastic bottles;
• sharp knife;
• freshener in granules in a container;
• a straw from Bubble Tea tea;
• acrylic paints;
• brush;
• small foam balls;
• dark woolen thread;
• glue gun;
• iron;
• handle;
• awl.

Cut off the bottoms of plastic bottles so that these blanks are 6-7 cm high. Attach them in places of cuts to a hot iron so that the edges become even.

Place one of these blanks to the fom, circle with a pen. Cut, remove this future dial to the side for now. Cover the cut edges of the bottom of the plastic bottles with glue, also attach them to the foamiran. Let the silicone cool, then cut out these circles along with the plastic blanks.

It is necessary to glue two foam balls to the back of the air freshener and make notches with a knife, in order to then lay the Bubble Tea tube here and fix it. But first you need to do some preparatory work.

From 1 and 2 sides of the straw, you need to stick one small foam ball, cut off the excess. In this way, you will make stubs in a straw, which will soon turn into a telephone receiver. This is necessary in order to thread a woolen thread here, which will act as a wire. Make holes on 1 and 2 sides of the foam plugs with sharp nail scissors or an awl, thread the thread here.

Secure it with hot glue. Apply it to the bottom of one and the second plastic bottles, which will become speakers. Place a straw between them to make a pipe.

Here's how to make a phone at home next. Paint it white, when the mortar sets well, then apply a red layer. Wait until it dries, Take a brush with a straight cut pile, use it to apply white peas to the red surface of the phone and handset. Since the speaker is white, it needs to be covered with red dots.

Remember, you still have a circle of foamiran? Draw a dial on it, glue it to the center of the phone with a gun.

The work is completed, you can take the phone as a quality or to school so that the child takes first place in the competition. Or leave this toy at home so that you have such an original air freshener.

Progress does not stand still, such phones will soon become museum exhibits. Today's children already want to have cool devices. So that they can play with these, make them with them from the available material.

How to make an iPhone out of cardboard?

Let's consider several options. For the first you will need:

• corrugated board;
• pencil;
• scissors;
• black electrical tape;
• White paper;
• glue;
• transparent tape;
• Printer.

From corrugated cardboard, you need to cut 3 identical rectangles measuring 762 mm by 1397 mm. Round off the edges with scissors. Apply glue to the blanks, connect them to each other, placing them in a pile.

Now you need to paste over the front and back panels with white paper. We decorate the sides with black tape. Print out your iPhone keyboard and glue it to the front of your phone.

It remains to draw with a black marker on the panel the remaining elements of this telephone, after which you can admire the excellent work.

For option 2, instead of plain paper, use photo paper, print the front and rear panels of this telephone on it, the sides are all one blank.

As in the first case, cut out rectangular pieces from cardboard with rounded edges, but you will need 1 or 2 of them. Fold the blank printed on photo paper accordingly without cutting it. You will get a single part, where the front and back panels will be at once, as well as all the sides of the phone. Put the cut out cardboard inside this blank, wrap the edges, glue them to fix them in this position.

If a young child enjoys spinning a dial, then show them how to make a phone out of cardboard by doing the work together.

Here's a believable toy you get. To do this, you must first prepare the following:

• corrugated board;
• a soft cheese lid or other suitable one;
• paper to match the cardboard;
• two pebbles;
• scissors with thin ends;
• pen or marker;
• glue;
• stationery nail;
• wire;
• cord;
• big scissors.

We proceed to the "cutting" of the details. The body of the phone looks like a bow. The following calculations are given in inches, but you can easily convert them into a Russian measure of length, remembering that there are 2.5 cm in one inch.

To make a dial for your phone, glue the cover and its sides with paper.

Using fine-tipped scissors, cut out round holes in the dial. Of course, it is better to draw them first, so that this part of the work turns out. neat. To weight this part, you need to glue a couple of pebbles to it.

Cut out a small circle from corrugated cardboard. Place it on the reverse side of the dial, fasten these parts together, as well as to the phone case with a clerical nail, you can also use a bolt with a screw for this.

Write the numbers with a pen, roll up two levers from the wire, stick them into the top of the phone. To fix these details, make loops on the reverse side.

Now attach the blank of the phone to the corrugated cardboard with the sides, circle, cut out two elements from this material, glue them in place.

To make a phone tube, cut out two identical semi-circular pieces. Connect them at the top and bottom with a strip of cardboard. Make a hole in the bottom, pass the tape here, tie it into a couple of knots on the back side.

The child will be happy to play with such a phone, and it’s not scary if he rumples or stains this item. For the same purpose, parents make a keyboard and a computer out of cardboard for their children.

These are also great ideas to help keep your beloved child busy, and so that the baby does not spoil an expensive thing. And all this can be created from waste material, so the finished toys will be practically free, like the next one.

The handset will also become a new toy for the child.

To create one, take:

• corrugated cardboard;
• pencil;
• toothpick;
• scissors;
• hot glue.

From corrugated cardboard, cut out two pieces of sidewalls. They will be the same.

Now, using scissors from the same material, create a strip 5–6 cm wide. By bending it slightly at the corners, glue it to the back of the tube. It is better to use adhesive tape for fastening. Using the same adhesive tape, attach the toothpicks to a small circle of cardboard, stick the other end of the toothpick into the top of the phone, gluing it here.

Cover the ends of the tubes with cardboard rectangles where the speaker and microphone are located.

Another corrugated cardboard rectangle will become the phone's keyboard. Also glue it from the inside with adhesive tape, apply the dial.

How to make a walkie-talkie from cups with your own hands?

This is another means of communication that will be a great toy for two children. After all, they can disperse even at a distance of 20 meters and hear each other perfectly. The trick here is that the sound is perfectly transmitted along a well-stretched thread, but first it hits the cup. The first person speaks into it, the second at this time puts his glass to his ear and hears everything well.

Here's how to make a walkie-talkie for such negotiations. Take:

• two cups made of cardboard or foam;
• awl;
• strong thin thread;
• two wooden sticks.

At the bottom of 1 and 2 glasses, use an awl to make holes. Thread the rope here from the outside, pull it out from the back. She must be inside. Tie a stick to this end of the thread, it will not allow the rope to jump out and make the hole in the cup even larger.

Now the children can go in different directions. The sound will be well transmitted when the thread is stretched. If you urgently need to take two kids, only yogurt cups are on hand, they will also work.

You can also use other plastic cups, the attachment method is described in more detail in this photo.

Using these items, you can also make a phone stand. You will learn about the intricacies of this manufacture right now, we will continue this topic.

How to make a phone stand?

Quickly make this from what is at hand. As you can see it is:

• two plastic cups;
• toilet paper roll
• scotch;

Attach with a clerical knife in the sides, closer to the top, in each glass one round recess. The diameter of these holes matches the diameter of the sleeve. Insert it into them. Tape the bottoms of the cups together. After that, a do-it-yourself phone stand in 5 minutes is ready.

If the speakers in the phone do not work well, the sound is weak, then place the device in a glass. Audibility will be better, and even this capacity will become a stand for him.

1. If you need to quickly fix the phone to, for example, watch a video on it, and only pencils and rubber bands are at hand, this is what you need. You will need 6 pencils and 4 rubber bands.
2. With the help of these simple items, you will assemble a geometric figure called a tetrahedron. To do this, first connect 3 pencils with an elastic band, which will become the tops.
3. Then, to each resulting corner, attach one more pencil horizontally below, also fix them with rubber bands.

An empty plastic container from shampoo or hair gel is just a godsend for those who are thinking how to make a phone stand so that they can also charge it at the same time? Cut off the upper part with a neck from such a container, cut out a rectangle. On the reverse side of the same part with a knife or scissors, you need to remove a small square. You will thread the charger into this recess, and put the phone into the resulting pocket.

If you want to make a desktop fixture, then wash the empty shampoo container well, dry it. Turn it upside down, cut off the bottom, cut out a frog-like figure. Here's how to make a phone stand out of similar plastic bottles.

From the remaining material, cut out the frog's soles with fingers, glue them with hot glue. From an ordinary plastic bottle, you can build both a phone stand and a convenient device so that you hang it while charging.

To do this, you only need two items:

• clean plastic bottle;
• scissors.

First cut off the bottom of the container, then you need to cut it out as shown in the photo. That is, at the top there will be a kind of loop, here you will begin to thread the charger. The phone itself is conveniently located at the bottom of the bottle.

Such accessories can be covered with stained glass paints to make them look even more interesting.

If you run out of liquid soap in the bottle, do not throw away the container. Rinse it well in running water, dry it. Cut off the excess, you get another stand for the phone, which will also help to charge it.

Other junk material will also contribute to the creation of such things. If you have cardboard left from the purchase, cut a strip of 10 by 20 cm from it, fold it in half. Draw a broken line as shown in the photo.

All you have to do is cut along this line, unfold the workpiece, straighten it, and you can conveniently position your smartphone.

If you have an unnecessary plastic card, it will turn into a useful accessory in a minute. Fold it in half, folding up the top and bottom small sides. Here's how to make a phone stand very, very quickly.

If you still have a case from an old audio cassette, it will also quickly become a stand. Place a communication device in it. The Lego constructor will also help you quickly make this accessory.

If you give a paper clip a different shape, then it also quickly turns into a phone stand.

If you want to see different options on how to make a phone stand from improvised means, then sit comfortably by the screen and turn on the video player.

The mobile phone has become an indispensable attribute of modern man. And on the road, and at home, and on the desktop, a useful gadget is given the main place, otherwise “suddenly someone calls, but I don’t hear / see.” For convenient placement of a cell phone on the table, coasters were invented. You can buy them in the store, or you can do it yourself from improvised materials. Even the most useless at first glance "unnecessary garbage", like a cardboard package from dairy products or a long-used cover for a disc, will come in handy in the work.

Cardboard stand

The first option is to make a cardboard stand for a mobile phone. This is not necessarily a single piece of material; you can take a used milk bag of a small volume (0.5 ml). It does not require anything to glue: you only need scissors.

The box must be thoroughly washed, crushed and cut off the bottom. Then cut along the folds.

The work will need a central part in the form of two rectangles. Between them is a fold. It must be cut out and folded with the outside inward, clamping the fold with one hand.

Starting from the opposite end, from below, you need to cut out a figure resembling the letter "T". It is narrowed upward, but has a beveled corner.

When the shape is expanded, the bottom edges become where the phone sits. It rests on the central edge. Budget stand is ready!

Stand from the cover for the disc

Surely everyone has a couple of DVDs lying around in the house. One of the unnecessary covers can be turned into a stand for a mobile phone.

To do this, the cover must be cut in half. Then cut off all the holes and rivets so that only an even rectangle with two bent corners at the ends remains.

The plate must be clamped with tweezers or pliers and lowered into boiling water. Thus, the plastic will become soft and pliable.

Holding the plate with pliers or any other tool, it must be bent so that one of the corner-ends does not slightly reach the other. 2-3 cm is enough, and the phone will be located in this space. One of the corners is glued to the surface. It turned out to be an interesting and light stand. The device can be placed on it both vertically and horizontally!

Paper clip stand

A paperclip mobile phone stand is an interesting thing that can be done in 2 minutes. To do this, you need a large massive paper clip, which you just need to unbend correctly!

To begin with, the wire is completely straightened into a line. Then you need to clamp it and bend it again:

1. Bend in the shape of a checkmark - U.
2. Bend both ends at an angle of 90 ° C, starting approximately in the middle.
3. Slightly bend the horses of each end.

Thus, an ordinary paper clip turned into a concise stand. The phone lies on it horizontally.

Toilet paper roll stand

Such good as a sleeve from a used toilet paper roll is enough in every home! Do not rush to throw away the cardboard form - it can be turned into a mobile stand in a matter of minutes.

All that is required is to properly cut off part of the sleeve at an angle. A small piece of cardboard should remain in front to create an emphasis. Such a stand will not be able to accommodate a phone that is too tall, but the standard size will “sit down” perfectly.

If desired, the stand can be decorated: painted, wrapped with cloth or pasted over with paper for gifts. And no one will believe that it was once part of a toilet roll.

all work step by step

Conclusion:

When working with familiar things, it is important to give free rein to imagination: try on, think, experiment. Then mobile phone stands will appear in the house regularly - and always different and interesting!

Today it is impossible to imagine a modern person without a mobile phone, because it is not just a necessary thing, but a stylish accessory. But the mobile phone has one significant drawback - it is often lost. To no longer face the problem of tedious searching, you need to define some permanent place for the device - for example, a stand. You can buy it at the store or make your own.

How to make a simple phone stand

If you decide to create a stand yourself, you should first prepare all the necessary materials - a beautiful fabric, PVA glue, scissors, a marker, a stationery knife, a plastic container that should have a flat shape (you can use a jar from any cosmetic product).

First you need to go through all the empty bottles and jars in the house - choose the one that is the right size for your phone and wash it thoroughly using hot water. Now you need to dry it well to remove all moisture, otherwise your stand will not last long.

We take the phone and apply it to the container, while placing their lower planes at the same level. With the help of a marker, we leave a mark on the bottle - we highlight the height of the future stand, which will be as comfortable as possible for you. On the front of the bottle we make a horizontal line and continue it on the sides.

We turn the bottle and draw its holder on the back. We make it with a sufficiently large hole that will fully correspond to the size and shape of the “plug” - it should pass into it quite easily when charging the phone.

Using a clerical knife or scissors, cut out the stand along the already outlined contour. We take sandpaper (fine) and carefully process all the edges until they become perfectly smooth. It is necessary to go over the rest of the surface of the future stand with sandpaper, as it should acquire a slight roughness in order to better bond with glue.

Next, take a piece of bright fabric (here you can use any material). The main thing is to take such a segment that it is completely enough to wrap the entire stand. Lay the material face down.

We lubricate the front wall of the future stand with sufficiently thick layers of PVA and press it as tightly as possible to the fabric in those places that were determined earlier. Now we glue all the sides of the stand with glue, do not forget about the back, which also needs to be processed. We strongly stretch the fabric so that there are no air bubbles or wrinkles left. In the same way, we wrap the fabric in the bottom area - we must try to fix it well in the shape of the bottle.

As soon as the matter is evenly distributed over the surface of the bottle, and you fix it with glue on all sides of the product, except for the bottom, take scissors and carefully cut off all the excess as close to the edges as possible. Then apply another layer of glue.

According to the shape of the bottom of the bottle, cut out a piece of material separately and glue it from below to gently close all the cuts. We cover the bottom with an additional layer of glue.

At the end, you need to dry the stand well - you need to place it in such a way that the product does not come into contact with anything. We hang the stand on some kind of hook, spoon, pencil, pen, or put it in a glass.

As soon as the product is completely dry, using a clerical knife, carefully cut a hole in the holder. You need to check whether you have fixed the material on the sections well. All protruding edges must be carefully glued.

Phone stand: car model

This stand option is ideal for phones with a wide display and a long body. You can make such a model yourself, besides, it is very convenient to use and is perfect for use in a car. And it only takes a couple of minutes to create it.

So, you need to take a binder (this is a clip that is used to fasten sheets of paper together). You also need to pick up a suction cup, which will become a mounting device. In the place where the suction cup has a hook, we attach a binder to it and our phone stand is ready. You can easily attach it to any convenient place.

Attach a suction cup to the back cover of the phone (do not worry, it will not damage its surface, and there will be no ugly marks left). You can easily place the device not only in a vertical, but also in a horizontal position.

Modular origami: phone stand

You can make a phone stand using the modular origami technique. First you need to collect 24 white and 23 pink modules. The colors of the blanks can be chosen to your taste!

We fasten the white modules together in a circle in such a way that a circle is formed, while between each pair of white ones, you need to insert 1 pink module. As a result, you will get a cone, gradually tapering towards the top.

This design must be continued until the stand reaches the desired height, which must be determined taking into account the size of the phone. The device will be placed in the central part.

DIY phone stand: photo

DIY phone stand: video

A phone stand is a must! It allows you to organize the space in such a way that your mobile phone is always at your fingertips. The stand can be bought or made with your own hands using various techniques. Such products will not only be convenient options for storing your phone, they can be a great gift for your friends or loved ones.

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared ...

By Masterweb

30.05.2017 20:57

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a lot of them on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is a great solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; gypsum; any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white paper, which will then be decorated; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments that will be appropriate should also be kept on hand.

Properly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone.
Sequencing:

First you need to figure out what shape the stand will be. After that, you need to draw templates of the required sizes on the sheet. Elements for the product are cut out from them. Then, carefully, according to the diagram that was previously drawn or printed from some site, we glue the necessary details. wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used. After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

special equipment; skills; the ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

the tree from which the structure will be constructed; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); a simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product. Then you need to put marks on a wooden base, according to which the connector will be cut out in the future. The next step is to cut out the shape with the available tool. To do this, you need to glue the prepared spare parts. The next step is to make the product smooth. This can be done with a file or a special mains-operated device. When the surface is smooth, you can paint the finished shape with some color. After staining, you must wait for the product to dry. The work is completed by gluing the accessories selected for this mission. open with varnish, which will give shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has an unusual look can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

Have you purchased a modern gadget and now want to make a stand? There are many techniques and methods that you can use to make a phone stand. Stylish little things can not only decorate the interior, but also make using the phone comfortable. In this article, we'll show you how to do it.

The easiest way to make a stand out of cardboard. To do this, cut a sheet of cardboard into several sheets of the same size. Suitable multilayer cardboard with corrugation inside. Glue the sheets with PVA glue. Let the glue dry. Draw a detail drawing on a thick cardboard base. This will be the figured leg for the stand. Using a utility knife, carefully cut the leg along the marks. Cut out another such piece. Cut out a circle from the remnants of a thick base, it will serve as an additional support. Cut a rectangle on the side of the leg. It will be the basis for the holder. Make a rectangle equal to the rectangular hole. Insert the part into the holes. Thus, you will connect the two legs together. Make axes for a circle from wooden rods. Make two holes in the legs and insert the axles there. Before that, put a circle on the rods. Before assembling the stand, it can be painted or pasted over with newspapers.

Do you want to make an autumn stand in the form of a maple leaf? To do this, pick a maple leaf and circle it. Use cardboard as the main material. Each of the layers should be slightly wider than the previous one, as the size of the sheet decreases slightly when bent. Bend the sides of the figure and the tail of the sheet. Cut out a circle from cardboard, equal in diameter to the width of the gadget. Glue the sheet to the base. Cardboard can be painted orange or yellow. To do this, use gouache or watercolor. Don't want to cut and paste anything? Then the phone stand can be made from a paper clip - a binder. It resembles a clothespin with a metal holder. To do this, attach a paperclip to the suction cup. It can be torn off the towel hook. Now it remains only to glue the Velcro to the phone. The legs of the paperclip will rest on the table.

If you smoke, you can use a regular cigarette pack as a stand. To do this, open the empty box and insert your phone into it. Very simple and original, and most importantly, you do not need to make anything. If you know the origami technique, then you can make a phone stand out of plain paper. To do this, make a few parts and glue together. The stand is shaped like a container of an interesting shape. A milk carton makes a great phone holder and organizer. Rinse the package and dry it. Now cut a rectangular hole in it for the phone. On the side of the box, do not forget to make a cutout for the charging cable. Cut out a circle next to the rectangle. This will be the hole for the glass. The diameter of the circle should be equal to the diameter of the cup. An ordinary plastic glass will do. Insert the cup into the round hole. Paint a milk carton with paint or cover it with foil.