Urinary stone in the toilet bowl: how it is formed, simple and cardinal methods of removal. How to remove a stone in the toilet bowl How to dissolve a water stone in the toilet bowl

1.table vinegar

It is best to use vinegar essence, the concentration of which reaches 70%. From the toilet, you first need to pump out water - this can be done with a plunger. Then the resulting void is filled with vinegar and left for 1.5-2 hours. Some home craftsmen advise enhancing the effect of vinegar essence with an ordinary solution of iodine from a home first aid kit, combining them in a 1: 1 ratio.

Table nine percent vinegar is also a force. Only it is desirable to reinforce it with soda (1 tablespoon of soda per glass of vinegar). This solution is poured into the toilet bowl preheated to 40-45 degrees and left overnight. The urinary stone will become soft and supple, it can be safely removed.

2.Lemon acid

The recipe is incredibly simple and consists in the fact that you need to fill the toilet with a few bags of citric acid. The amount is selected depending on the thickness of the layer formed by the urinary stone: the thicker it is, the more acid is required. There is no need to flush the toilet. It will be possible to admire the result in 10-12 hours. It is clear that during this time it is better not to use the toilet.

3.Soda

It not only enhances the action of acetic acid (and citric acid, by the way), but in itself is an excellent cleanser. And hardened formations like urinary stone for her is quite a feasible task. You just need to provide a fairly long contact with the problem surface. It is done like this: at night, a whole pack of soda is poured into the toilet and left until the morning. Then you just need to lightly clean the place where the raid was with a brush.

4.Electrolyte

Liquid electrolyte for car batteries is a super powerful tool, but insidious. With a urinary stone, it will deal with in a matter of minutes. But also at lightning speed it can harm the sewer wiring if it is mounted from plastic pipes. Therefore, it is recommended to use liquid electrolyte to clean the toilet bowl only in extreme cases: when the stone does not lend itself to any other influence. And you can do this only on the condition that you have metal sewer pipes.

5.Domestos

The line of cleaning products sold under the Domestos brand has a special preparation designed to remove urinary stone and similar deposits. It comes in a black bottle and is called Domestos Pink. The information on the package says that the drug removes 100% limescale and rust. Used undiluted. Of the shortcomings, only one can be distinguished - the sharp smell of chlorine.

6.Toilet Duck Active

Johnson's products are produced in Ukraine. The main active ingredient is hydrochloric acid. The tool has a gel-like texture. The liquid can be poured directly into the water in the toilet. After about an hour, they wash it off and look at how the condition of the urinary stone has changed. If necessary, the procedure can be repeated again.

7. Cillit

Available in convenient plastic bottles with a curved spout, making it easy to apply even under the rim of the toilet. Belongs to the category of strongly acidic agents. Just like "Duckling", it contains hydrochloric acid. According to the results of consumer tests, it turned out to be perhaps the most effective drug for removing limescale and urinary stone, including old ones.

Dry oxalic acid used in the chemical industry for etching surfaces before applying enamels.
If you have some of this white matter, you will need it.
How to remove a urinary stone in the toilet with dry oxalic acid? Either apply it to a damp cloth and wipe off the dirt, or dissolve a fair amount of it right in the toilet bowl.
After application, rinse it off and clean the surface with a brush. Don't forget the gloves.

♦If you sell - you can buy. This package will last for several years.
Another folk recipe was born recently. Just poured into the toilet bottle - another Coke or Sprite.
Citric acid in them quickly corrodes deposits. Which, by the way, makes you think - is it worth drinking these drinks without worrying about your teeth.

♦A relatively new folk remedy. I wonder if the manufacturer knows?

Whatever material the toilet bowl is made of, over time, deposits in the form of yellow plaque and urinary stone will appear on it. These contaminants do not pose a threat to human health. But since they exude an unpleasant odor and look far from aesthetically pleasing, it is recommended to remove the urinary stone immediately after the appearance.

Why does plaque appear on the toilet?

The main factors of urinary stone deposition are:

Rare and poor-quality cleaning of the toilet bowl. If you do not wash the toilet thoroughly, at least once a week, then plaque will constantly settle under the rim. And, over time, its layer will only thicken.
A common cause of contamination is irregular flushing. It concerns families with small children, or very frugal people. If flushing is not carried out after each trip to the toilet, then the mineral plaque becomes so dense that it will be extremely difficult to wash the stone with a simple brush and household products.
Constant maintenance of plumbing can lead to such an unpleasant phenomenon as damage to the protective coating. When the integrity of the anti-mud coating is broken, the plaque settles in the cracks, and there it is almost impossible to wash it off.

In order for the toilet to last as long as possible and look well-groomed, it must be cleaned carefully, regularly and only with special means.

How to get rid of plaque with cleaning products?

To remove a urinary stone, you can use simple cleaning powders, for example, Pemolux or Comet. To do this, you need to scoop out water from the toilet, pour a small amount of powder inside and rub it with a brush. It may take a long time to achieve the desired result and this method cannot be called the most effective. In addition, the powders scratch the coating and leave behind microcracks, into which dirt clogs over time.

Due to its composition, which includes sodium hydroxide, alkaline agents show high efficiency in the fight against urinary stone.

You can use "Whiteness" or "Domestos". Water should also be scooped out, applied to the surface of the selected gel and left for 30 minutes. After the specified time, clean the inside of the toilet and rinse off the remnants of the product and plaque with water. Alkali dissolves unwanted deposits well, so products based on it cope even with old pollution.

Means "Sanita-gel", "Silit" and "Toilet duck" contain various acids. They are perhaps the most effective toilet cleaner. In addition, such gels often have a disinfecting effect. With their help, you can not only wash the stone, but also get rid of infections. They should be used in the same way as alkaline products.

How to get rid of urinary stone using folk methods?

Stone plaque can be easily dissolved with folk remedies. Among them are:

vinegar and baking soda;
lemon acid;
oxalic acid;
bleach;

To clean the toilet with vinegar, the liquid must be heated to 30-35 degrees and mixed with 0.5 tsp. soda. The resulting solution should be evenly distributed over the entire surface inside the toilet and left overnight. By morning, the stone will completely dissolve and it remains only to wash it off with water. Perhaps this is the best remedy for getting rid of the stone at home.

Citric acid helps to remove plaque that has not had much time to petrify. You need to purchase 4 sachets of acid, mix with a drop of water and apply to deposits. Leave on for at least 6 hours, preferably overnight. In the morning you need to drain the water and, if necessary, walk with a brush.

Oxalic acid is not an expensive and effective remedy, but it is not available to everyone. Now in its pure form it is sold much less frequently. The acid is easy to use and works quickly. It is poured onto contaminated areas and left for 30-60 minutes. After the specified time, the acid will already corrode the stone and all that remains is to wash it off with water. Another plus of oxalic acid is the absence of an unpleasant odor.

Chlorine not only dissolves urinary stone, but also disinfects it. The product must be poured into the toilet and left for half an hour, and then rinsed with water. For best results, you can walk with a brush.

What measures to take in advanced cases?

If the toilet bowl is already quite old, then roughness, chips and cracks can be found on its surface. In such cases, even regular cleaning with powerful tools will not help to avoid the appearance of deposits. Most often, only replacing the toilet helps, but if this is not yet possible, you can resort to unconventional methods to remove a urinary stone in the toilet:

electrolyte (battery fluid).

To wash the stone, you need 1 liter. carbonated drink. It is poured into the toilet and left for 2 hours. Coca-Cola will corrode deposits, and they can be easily removed from the surface, all that remains is to lightly rub with a brush and rinse everything off with water.

If all of the above methods do not help, then you can use the electrolyte.

Attention! Under no circumstances should the electrolyte be used in systems with plastic pipes.

The electrolyte quickly corrodes not only the urinary stone, but also the sewer wiring. If the sewer pipes are made of iron, then this method can be applied.

The use of electrolyte requires special care and accuracy. He can easily clean the toilet from the stone, but can also leave burns on the body. Therefore, before starting work, you need to take care of your uniform. A person must wear a rubber apron, gloves, and a respirator. Eyes also need to be protected with glasses and only after that take on acid.

Pour the electrolyte carefully and slowly so that it does not splatter. To do this, hold the container so that it is as close to the toilet as possible. After the liquid has been applied to all the necessary areas, you need to wait 15 minutes, then simply wash off the electrolyte, and with it the urinary stone. No need to feel sorry for the water, it is worth rinsing at least 6 times.

Regardless of what means a person uses, he must always take care of his safety.

Gloves should always be on the hands, and a respirator on the face. If it was not at hand - you can not bend low over the toilet. Inhaling the fumes from the reaction of the funds is completely useless.

How to prevent the formation of deposits?

In order not to resort to the use of strong means, a number of simple measures can be taken to prevent the problem.

The condition of the toilet bowl largely depends on the care of its use. Such plumbing needs special care, so you must follow all the rules of operation so as not to worry about how to clean the toilet bowl from limescale, as well as urinary stone.

Causes of deposits

Due to the rare cleaning of the toilet bowl, a urinary stone appears on the rim and drain hole. Another reason for this phenomenon is irregular drain observed in families with small children. Due to untimely flushing of urine, mineral plaque is deposited on the walls of the toilet bowl. Its density is constantly increasing, resulting in a urinary stone. It will not be possible to remove it with a brush. Ordinary household chemicals are also unlikely to help get rid of the stone.

Too hard water with a specific chemical composition leads to limescale. To avoid the formation of plaque, it is necessary to clean the toilet bowl from time to time, using special products. It is also important to take care of water softening.

One of the reasons for the appearance of limescale and urinary stone is damage to the surface of plumbing. Such defects are formed due to improper operation. So, it is enough to pour hot liquid into the toilet bowl so that small cracks appear there, where plaque will grow.

Cleaning and coating type

Many people do not think about the type of coating when caring for plumbing. In fact, when creating such modern products glaze with various coatings is used including antibacterial, anti-mud and water-repellent. This material has its drawbacks. So, when using hot liquid for washing, the coating will crack, which will spoil the appearance of the toilet bowl and become a source of bacteria. Although such material is resistant to external factors, it may suffer due to exposure to certain acids. Accordingly, hard washcloths and abrasive powders should not be used to clean stone or plaque.

In advanced cases, when the pollution layer is very large, it is worth considering whether to wash the toilet bowl with expensive products. Perhaps a more rational option is to buy new plumbing. If you still decide to start cleaning, first study the composition and instructions for the selected detergent.

Proper toilet cleaning

To clean plumbing from deposits, it is necessary, first of all, extract water. For this purpose, a plunger or a glass with a handle is suitable. After that, you should use detergents. They are applied to the walls and left for at least an hour. If necessary, the composition is re-filled, and then the plaque is removed with a brush. In the presence of old deposits, more serious means will be needed.

Household chemicals

Folk remedies

Vinegar will help remove the stone from the toilet. A glass of this liquid is heated to 35–40 ˚ C, a little baking soda and iodine are added to the container. The mixture is poured into the toilet and left overnight, due to which the stone will completely dissolve.
You can remove plaque and stone with citric acid. For this procedure, 2 packs of powder are enough. The product is poured into the toilet, and then the lid is closed. After 2-3 hours the stone will dissolve. To completely remove it, you must repeat the procedure several times.
Often used to clean the toilet technical oxalic acid which is sold in powder form. Before using it, you must read the instructions and observe safety measures, namely, wear rubber gloves. The powder is applied to a damp cloth and wiped with her fate, covered with urinary stone or plaque. If desired, you can dissolve the acid in the toilet bowl, and then leave it for an hour. In this case, you will need a lot of powder. After cleaning, the plumbing is thoroughly washed.
You can remove plaque or stone from the toilet using electrolyte. This is the most effective method for removing old, serious contaminants. When performing the procedure, you must wear a respirator, rubber gloves and goggles. The electrolyte must be poured very carefully so as not to splash it. Such an effective tool will not work in the presence of plastic pipes.

Preventive measures

As mentioned earlier, plaque in the toilet appears due to irregular cleaning. You can avoid or reduce the chance of stone formation with simple tools and tips.

Simple preventive measures are very important, because clean the plaque layer or a stone 1-2 cm thick is not easy. In order not to encounter such a troublesome event, it is enough to regularly use special detergents and do not forget about flushing after each visit to the toilet.

Any types of contaminants must be removed in a timely manner, the main thing in the question of how to clean the toilet bowl is to choose a detergent in time and clean up unpleasant deposits at the initial stage. In addition to professional cleaning products, there are many folk recipes that can provide excellent results in this case.

It is much easier to find the right remedy than to wash the toilet from yellow plaque, if you know the origins of this problem. The main reason for the constant contamination of the plumbing fixture is the constant leakage of water. A thin stream of liquid brings with it metal oxides and calcareous substances, which settle down and can reach a centimeter layer in a couple of years. The second reason is an old rough toilet bowl, on smooth porcelain or earthenware, dirt is deposited much more slowly.

The main types of deposits on the toilet:

How to wash the rust in the toilet?

Solve the problem of how to wash the toilet inside, where there is water, from old rust, you can use proven factory detergents. Acids, alkalis or abrasive powder preparations are suitable for this purpose. Depending on the cost of the substance, they work at different speeds and efficiency. Acid or alkali can simply be poured into water, wait a few minutes and rinse with water, all the dirt dissolves and goes down the drain. It is tedious to work with powders, it is required to carefully clean the ceramics with the selected ones, they are able to scratch the surface.

Examples of anti-rust cleaners:

Abrasives- Pemolux, Sarma, Komet.
Alkaline preparations- Domestos, "Every day" (cleaning gel).
acids- orthophosphoric acid (100 g of an 85% solution per 0.5 l of water), Cillit, "Toilet duck".

How to clean the toilet from limescale?

When thinking about how to clean the toilet from lime deposits, you need to pay attention to acid detergents. The potent substance is an automotive battery electrolyte, consisting of a solution of sulfuric acid and distilled water. Industrial grade 33% sulfuric acid has powerful cleaning properties and is suitable for the job. It is necessary to work with the listed drugs very carefully, they emit vapors dangerous for the body.

We solve the problem of how to wash the plaque in the toilet bowl with the help of acids as follows - we pump out water from the device, distribute the reagent over the surface of the toilet bowl, hold for 20 minutes (several hours, depending on the degree of contamination). Next, rinse the surface with water and repeat the process if necessary. When cleaning the toilet, be sure to protect the vital organs with a respirator, goggles, gloves.

How to clean the toilet from a urinary stone?

The solution to the problem of how to clean the toilet inside from a urinary stone can be done with the help of whiteness. We pump out the liquid from the device, pour a bottle of working solution inside and leave it overnight. If necessary, the next night, repeat the work to achieve an acceptable result. You can wash the toilet from urinary stone with oxalic acid, electrolyte, Cillit, Toilet Duck and other universal cleaners.

How to wash the blackness in the toilet?

It is always easier to take preventive measures rather than expect heavy contamination or test strong acids and reagents at home. In solving the problem of how to properly clean the toilet from mud deposits of any origin, deodorizing tablets for cisterns and drain holes help. They remove rust and other dirt from the walls and parts of the mechanism, have a whitening effect, kill microorganisms, and prevent the formation of urinary and limestone.

Examples of toilet bowl cleaning tablets:

Liara;
Kobayashi (Japan);
Aro "Sea Breeze";
Cubes Bref;
SALIX "Sea";
Kobayashi Bluelet Dobon Bleach (Japan).

How to clear a blockage in the toilet?

You need to know not only how to descale the toilet, but also be able to remove the strong one that prevents the normal discharge of water into the sewer. The pipeline can become clogged for various reasons, often this problem is caused by the negligent attitude of the users themselves or childish pranks when a large amount of paper or household garbage gets inside.

How to clean a clogged toilet:

Simple blockages are eliminated by a bucket of boiling water, quickly poured into the sink to create a strong pressure.
Pour half a pack of baking soda into the toilet, after a while drain the dirt with water and clean the surface with a brush.
The use of household chemicals - "Mole" or its analogues.
Use a plunger with a bowl up to 10 cm in diameter.
In the absence of a plunger, a cut plastic bottle or a “pusher doll” made from rags wound around a stick is used.
In severe cases, when all of the above methods, how to clean a home toilet, do not help, we call a plumber, or we use a flexible cable ourselves.

How to clean the toilet bowl?

Mineral salts can be deposited inside the tank, fixed on the walls, and damage the mechanism. There are different models of plumbing fixtures, it is advisable to first familiarize yourself with the device diagram, which is always supplied with a passport. In the task of how to clean the toilet cistern, a lot depends on its design. Often, its lid is screwed tightly to the drain mechanism. It is necessary to turn off the water and unscrew the tank, remove the float and other elements, treat the parts and walls of the drain tank with detergents.

Means for cleaning the drain tank and mechanism:

Domestos;
white;
Cillit;
Sanox gel;
Dosia;
Tyron.

We clean the toilet with folk remedies

In addition to household chemicals for washing plumbing, many people prefer to use folk recipes. When thinking about how to clean the toilet at home safely and with a lasting effect, first examine the food supplies in your kitchen. There are many good preparations here that do not damage the skin of the hands and qualitatively remove raids of various origins.

How to clean the toilet with Coca-Cola?

Phosphoric acid and other ingredients that are present in this drink help to remove dirt in pipes and scale. If you want to learn how to clean the toilet with Coca-Cola, then you need to buy a couple of bottles of refreshing liquid. We flush the device with water, pour the contents into the toilet at night or apply rags soaked in our reagent to the dirty surface. In the morning, wash off the sink with water and clean the surface to a shine with a brush, removing any remaining dirt.

How to clean the toilet bowl with vinegar?

Simple and affordable ways to clean the toilet with baking soda and vinegar are the most popular among the people. It is better to take not apple cider vinegar for work, but a 9% solution or 70% vinegar essence. Pour a glass of reagent into the pan, cover it with a lid, heat the contents on the stove to 50 ° C. You can enhance the effect of the solution by adding a tablespoon of soda or iodine (1: 1) to it. We pump out water from the toilet, apply wipes soaked in the reagent to the contaminated place, wait from 2 to 6 hours and remove the remnants of plaque with a plastic scraper or brush.

How to clean the toilet with citric acid?

If we regularly clean the toilet with folk remedies, then there is no need to purchase imported chemicals or powders made on the basis of strong acids or alkalis. A few sachets of citric acid cost a little, but they can help with serious problems in the bathroom or toilet. We apply the powder to the sink, trying to cover all the problem areas with it, wait 2-4 hours (preferably until the morning), carefully clean off the remnants of plaque with a brush or rag. For the best effect, you almost always have to repeat this procedure 2-3 times.

How to clean the toilet with a cable?

A professional cable, which is used to clean sewer pipes and plumbing fixtures, looks like a flexible spring made of thick and strong wire. If you can not cope with the problem of how to clean the toilet with chemicals, then this tool will help you effectively do this job mechanically. It has a spiral end that allows easy penetration into any small holes. A rotating handle is installed on the front, which facilitates the work of cleaning the sewer.

How to clean the toilet with a plumbing cable:

We lower the cable inward, pushing the spiral with rotating movements.
We turn the handle in one direction, trying to pass the bend of the pipe.
Faced with a blockage, we continue to turn the handle, trying to break through the layer of dirt.
If the cable rests against a dense barrier, then we scroll the handle in the opposite direction, pull it out and, if necessary, remove pieces of debris from the tip.
We repeat the procedure.
When the plug begins to move further, we continue to screw in the cable with rotational movements, pushing the blockage as far as possible into the wide drain pipe.
If it is required to clean a plastic pipe, then a protective plug is put on the end of the steel wire.

Toilet cleaner

Almost all popular brands involved in the production of household chemicals produce cleaning products for plumbing fixtures. It has already been tested in practice, if we clean and wash the toilet bowl with a quality preparation, then we get guaranteed success and a long-term effect in the toilet room. A small rating of detergents will help you make the best choice and purchase good household chemicals.

Clean plumbing is an indicator that it is regularly looked after. The toilet is used frequently, so a variety of dirt accumulates in it. If small deposits are not removed in a timely manner, they will harden and it will not be so easy to get rid of. The main problems encountered when cleaning the toilet are limescale and urinary stone.

Causes of plaque

Limescale (or water stone) is formed from calcium and magnesium salts found in water. These are plaque and stains of yellow-orange color that appear in the flush areas, on the bottom of the toilet bowl, under the rim and even on the lid. The more time passes between scheduled cleanings, the thicker the layer of deposits and the more difficult it is to clean them. Lime deposits also need to be cleaned regularly or

A urinary stone is the result of sedimentation of minerals contained in the urine. If you periodically forget to wash off the water, ugly streaks form on the walls, and then a gray-yellow stone.

The appearance of deposits is also facilitated by:

hard water,
cracks and irregularities on the surface
leaking tank

Attention! In addition to unsightly appearance, the stone in the toilet bowl is a source of unpleasant odor and a favorable environment for bacteria.

You can clean the toilet from limescale and urinary stone with the help of improvised means that can be found in any home. In especially advanced cases, if the toilet is old or has not been cleaned for a long time, you will have to resort to aggressive chemicals.

Toilet cleaning rules

Take care of protective measures. Be sure to wear gloves on your hands, and in case of using caustic substances, wear a protective mask so as not to inhale the fumes.
Remove the water from the toilet, scoop it out with a ladle or use a plunger. Soak up the rest with a rag. This must be done for the best effectiveness of the applied funds.
Apply the selected product for several hours.
Remove deposits with a stiff brush or brush.

Removal of thin and medium plaque

Cleaning with baking soda and vinegar

This is a fairly strong tool to help remove the middle layer of limescale and urinary stone.

Heat the vinegar to 40 degrees. This emits a pungent odor, be careful!
Add baking soda: 1 tablespoon per 200 ml of vinegar.
For greater effectiveness, add iodine.
Pour the sizzling mixture into the toilet so that it covers the deposits. Under the rim of the toilet, where the stone also accumulates, lay toilet paper soaked in vinegar.
Leave for 8 hours or overnight.
Clean off the plaque with a brush. Hard-to-reach places can be cleaned with a toothbrush.
Rinse off with water several times.

Citric acid can dissolve a thin layer of urinary stone and limescale.

For this method, it is not necessary to remove water from the drain.
Pour 2-3 sachets of acid into the toilet and close the lid.
Wait 2-3 hours.
Scrub thoroughly and rinse with warm water.

If in one application the entire plaque has not dissolved, repeat the method 2-3 times and there will be no trace of pollution.

White

The application is simple:

Pour the bottle into the toilet without water.
Close the lid and leave overnight.
Rinse with warm water and then apply the brush.

Soda

Soda will help clean the toilet bowl with slight dirt. It is better to use calcined.

Sprinkle Baking Soda on Contaminated Areas
Leave to act all night
Wash off with warm water in the morning

Coca Cola

You can also remove yellow plaque and rusty stains with the help of Coca-Cola.

Pour a large bottle of soda into the drain
Leave for the night
Scrub with brush and rinse with water

Household chemicals

Powders. The most popular: "Komet", "Pemolux", "Chistin", "Biolan". Their action is based on the abrasive effect. Some contain chlorine. Applying them is simple, but you need to remember that mechanical action leaves micro-scratches on faience. Over time, dirt will clog in them, so in order to extend the life of plumbing, it is better not to use powders.
Liquids. For example, "Whiteness", "Sanoks". They are poured into the place of contamination and left for some time to act, then washed off.
Gels. This form is most convenient for cleaning: due to the thicker consistency, they slowly flow down the walls of the toilet bowl, corroding plaque. Gels are applied under the rim of the toilet bowl, the exposure time is about 30 minutes. Then a brush is applied and the product is washed off. Gels contain strong acids and alkalis. For example, "Toilet Duck" contains 15% hydrochloric acid, so it will do a great job with a stone in the toilet. "Domestos" is mainly used for disinfection.
Creams. It acts like a gel, but has an even thicker consistency. The cream is applied with a sponge or brush on the contaminated surface, time is given for exposure, then washed off. The most famous is "Cif". Creams are more economical consumption and gentle effect on the surface.
Tank tablets. They are used to prevent limestone and urinary stone, and also provide a pleasant smell and cleanliness with each flush. The tablet is placed directly into the tank, and with each flush, it turns the water into a bright color. Clear water is a signal that a new pill is needed.

Removal of thick plaque with strong acids

If no folk and cleaning products help, strong acids can be used. These are extreme measures that you should rarely resort to and strictly observe the exposure time, since such chemistry can corrode the enamel and harm pipes and plastic parts.

Oxalic acid

Medium toxic organic acid. A popular plumbing cleaner in the days of our grandmothers. Provides perfect whiteness and effectively removes stone. Nowadays, it can be purchased at hardware stores. Before use, carefully read the instructions and put on thick rubber gloves.

Mode of application:

Sprinkle powdered acid on a damp cloth.
Apply to contaminated areas. If you need to clean the drain, dissolve it in water.
Wait 1 hour, during which time the plaque will dissolve.
Rinse thoroughly with water using a brush.

It is an inorganic acid of medium strength. With it, you can not only clean the toilet from the stone, but remove rust from the internal parts of the tank. The main advantage of this acid is that it does not damage rubber and plastic elements. Mode of application:

Pour 100-150 ml of acid into the tank and into the drain hole
Wait 15 minutes
Rinse with plenty of water and scrub with a brush.

Hydrochloric acid

This is a very strong toxic agent. Will instantly remove the stone, but should be used with extreme caution. Before use, put on goggles, a respirator and thick rubber gloves. Vapors of this acid are also dangerous!

Mode of application:

Apply the liquid to the walls and pour half a glass into the drain hole.
The exposure time is 10 minutes.
Rinse with plenty of water

Attention! This method is not suitable if you have plastic pipes installed, they will leak from acid damage.

Electrolyte

The battery electrolyte is produced on the basis of sulfuric acid, you can find it in any store for motorists. This strong and very dangerous remedy perfectly dissolves limescale and urinary stone. It can only be used in rare cases. The method of application is similar to the method with hydrochloric acid: apply, leave for 10-15 minutes and rinse with water. When applying, follow all safety measures, avoid splashing the product, as you can get chemical burns.

Preventive measures against limescale and urinary stone

Clean the toilet bowl at least once a week with special cleaning products. The frequency of washing depends on the number of people who use the plumbing.
After each use, drain the water and use a brush if necessary.
Don't let the tank leak. To do this, timely make minor repairs or replacement of drain fittings.

Categories

Popular