Flower stand - how to make interesting and original projects with your own hands? (90 photo ideas). Hand-assembled flower racks Beautiful flower racks

- not an exception. At the same time, the abundance of vegetation causes inconvenience - there is nowhere to place them. How to properly place indoor plants so that the space is not overloaded?

Alternative solution - bookcase for placing flowers. This piece of furniture will allow you to install flowers not only in a convenient way, but also decorate the design in the garden or indoors.

Choosing a whatnot for flowers in the country

A characteristic feature of the rack is the placement of vegetation on different tiers in such a way that small plants are not obscured by large ones. Vertical shelving is especially suitable for climbing vegetation or for flowers with lush leaves.

Place large-stemmed flowers on top of the shelving, and lower small plants so they can be seen better.

Shelves come in all sizes, shapes and designs. Any of them will be in harmony with the style of the interior, both at their summer cottage and indoors.

The rack can be made from any material. For example, a metal bookcase is particularly strong and durable, it will not deform under the weight of the pots.
When choosing a rack, pay attention to its future location. If you decide to install the structure on the street, whatnots made of wood or chipboard can quickly become unusable because they are exposed to precipitation. However, such wooden shelves are great for indoors.

Forged shelving can be placed both outdoors and in the room. Such an item will complement the interior of the living room or bedroom, as well as decorate the garden area.

There are no difficulties in determining the place for the rack. It is important to take into account the predisposition of flowers to conditions: whether they like the sun's rays or, on the contrary, it is better for them to be in a shady area.
In the room, the rack should not take up much space. In this case, purchase or make your own corner bookcase. It is compact, you can put more plants on it. Wall shelves and shelves will also not interfere, do not clutter up the place.

As a rule, indoor flowers are placed on the loggia, window or balcony. Make the most of your space with shelving. For example, place a structure with shelves on the window, but keep in mind that there will be less light in the room, and the window frame will have to be opened by removing the rack from the windowsill.

Flower rack on the windowsill in several steps is also convenient. So the main area of the window through which light enters will not be blocked.

Compact stand-shelf can be placed on the balcony. Plants in pots are hung on them or flowers are placed on the shelves of the cabinet. Attach wheels to the rack for easy movement of the structure to other rooms.

To make a bookcase yourself, a failed ladder or stepladder will come in handy. This design is almost ready for use, you just need to fix it on a plane, remove chips and sand splinters, and paint it with paint.

If the stairs do not have wide steps, put simple boards on them, they will be shelves.

Shelving made of wooden material you can make it yourself from bars, boards and appropriate fasteners. A convenient whatnot is obtained from pallets. Turn them over and stack them on top of each other, arrange flowers and flowerpots.

With the help of shelving structures, you can not only save space, but also get a beautiful arrangement of flowers. If you have a "winter garden" - such an item is indispensable.

When it comes to choosing a gift for a beloved woman, a man, first of all, has an association with jewelry or various elements of women's clothing. But for some reason, the moment is not taken into account that many of the fair sex really like to plant indoor flowers and take care of them in every possible way. Therefore, the idea with original flower shelves would be quite appropriate. The information below will tell you about easy ways to make your own flower shelves.

Plywood flower shelves

If there is a large plywood lying around in the workshop and there is a desire to please your soulmate, you can easily make flower shelves from the material with your own hands. Ordinary inexpensive plywood with a certain thickness will become a very convenient design on which you can put flower vases. A little imagination will turn such a shelf into an original design solution.

Instruments

To create a flower shelf, prepare the tools:

a sheet of plywood of such a size that it is convenient to cut out all the necessary elements;
a pair of nickel-plated or galvanized pipes of small diameter (the quantity is calculated by 2 pieces per shelf);
paint or any kind of wood varnish; electric jigsaw;
drill with a convenient nozzle for drilling holes for mounting pipes;
construction tape and sandpaper.

Manufacturing

Shelves manufacturing process:

After carefully examining the installation site of the flower rack, you need to choose the appropriate size for the shelves.
On a sheet of plywood, based on the established measurements, make drawings of the shelves. When choosing the shape of the shelf, you can move away from the standard straight lines and complement the image of the structure with interesting bends of different depths. The main thing is that the general appearance of the rack organically fit into the interior of the room.
When cutting out the intended parts with an electric jigsaw, you need to carefully monitor all the contours of the elements.
Holes for mounting pipes are marked on the topmost workpiece.
The cut blanks of the shelves are stacked on top of each other and holes of a certain diameter are carefully drilled to install pipe supports.
Plywood blanks are cleaned with an emery sheet. It is necessary to carefully process the end parts of the shelves.
This is followed by the stage of coating the finished elements of the rack with paint or varnish. This procedure must be repeated several times to form an even and dense layer of the applied substance.
Mounting the finished rack to the wall is as follows. Specially designed brackets are attached to the back of the upper and lower shelves. Holes are drilled in the wall, according to the marks made. Rack shelves are fixed on the wall with self-tapping screws threaded into the holes of the brackets. It is necessary to check the suspended structure well for strength.

wooden shelving

Dimensions of wooden flower shelves can be 60 cm long, 23 cm wide, 70 cm high. This model has 3 flower shelves.

For the manufacture of shelves, strips of small thickness are quite suitable. Since each shelf will consist of certain elements, it is necessary to cut out 18 such thin blanks. The length of each element should be 60 cm. And from the bars you can make racks for a flower rack.
Wooden blocks of 20 × 20 mm in size are selected and cut every 70 cm in the amount of 4 pieces.
From the cut bars with an electric jigsaw, elements of the future structure are cut out 23 cm in length.
On the desktop, two racks are laid parallel to each other and marks are made in the places of future fastening of the shelves. Here, the important point will be to determine the required distance between the shelves, as this will affect the possibility of installing flowers of different heights there.
At the next stage, 3 wooden flower shelves are installed, each of which consists of 6 planks. The shelves are connected to the end part with nails driven into bars 23 cm long. The length of each nail is 2.5 cm. Upon completion of the installation, it is necessary to process all uneven edges with an emery sheet.
When mounting the shelves, you need to expose the entire structure in such a way that the master can comfortably hold the rack and hammer nails at the same time.
The finished product is treated with paint or varnish for furniture in several layers.

Shelves for flowers made of wood and metal

The whole structure is fastened with the help of metal racks connected to each other by a welded jumper. This gives additional strength to the entire flower shelf on the wall. Bars of wood will act as coasters.

If the whole structure is attached to the wall, then it is necessary to acquire metal rods with a cross section of 1 cm. And to install the finished structure, corners are mounted on the floor. Based on the chosen place for installing the rack, the dimensions of the shelves themselves are determined. After that, metal racks are welded. With the dimensions of the length and width of the side contours of 90 and 20 cm, respectively, it is possible to install 4 shelves with a distance of 30 cm from each other. Such dimensions are suitable for compact flower pots with small leaves of plants planted there. And the location of the top shelf allows you to install flowerpots with flowers of any height.
The metal racks of the structure are connected using welded rods. This method of fastening will provide an additional metal base for the plane of the shelves themselves and make the entire rack more reliable.
Metal strapping is used in 4 tiers. Finished welded elements are painted to match the interior.
Wooden planks 25 × 15 mm are sawn along the length of the shelves of 60 cm. The finished elements are laid parallel on a flat surface and connected to each other with wooden bars 20 cm long.
A wood-metal shelf is mounted to the wall using self-tapping screws. The distance between the marks for fastening should not be less than 50 cm. In order for the metal frame to be located on the wall parallel to the floor, a building level is used.

This will make it possible to evenly lay the planks for the shelves. The final step will be painting the wooden elements of the finished flower shelf.

Rack for flowers from a plastic window sill

Based on the very name of the design, the main component of such a creation will be a plastic window sill 3 m 90 cm long. You will also need 3 pipes in a nickel-plated or galvanized version, 9 flange mounts and brackets in the amount of 2 pieces.

Each window sill is cut across into three pieces, each 1.3 m long. Thus, we get our shelves.
3 holes are drilled in each shelf for future metal racks. The location of the holes will be the vertices of an isosceles triangle, that is, one at each end closer to the back and one in the middle near the front edge. Hole locations in all shelves should not be combined.
Measure and cut 3 pipes of the same length. The structure is fastened with lag screws for flanges.
It is fixed to the floor using the same elements. The role of the lower fasteners for metal racks is performed by flanges and screws. And with the help of brackets mounted in the wall, the upper ends of the two pipes are fixed.

Corner shelves

Necessary blanks and materials for the work:

Chipboard sheet.
Metal pipes nickel-plated or galvanized.
Screws and flanges in sufficient quantity.

Manufacturing process of corner shelves:

The design is assembled in full analogy with the previous work. With an electric jigsaw, all the planned elements are cut out for the manufacture of triangular shelves.
Marks are applied to each workpiece for cutting holes for metal racks. These holes are drilled in three places. This process is repeated for each shelf.
All elements are interconnected by means of flanges and screws. The position of the rack is fixed with the help of brackets built into the wall, which are put on the upper parts of the pipes.
And at the last stage of work, it remains to choose a color suitable for the overall interior for painting the structure.

Glass rack for flowers

A very original design of such a rack is achieved through the use of different glass and the use of LED lighting. Rays of light penetrating between the flowerpots magically illuminate the flowers from below, creating an overall radiant picture. To make such a rack, you need 6 glass shelves and a pair of wooden slats.

The glass thickness must be at least 5 mm. Glass is selected tempered type.
The support strips for the shelves are made in a wooden style. Based on the cross section of such strips, grooves are selected. Glass shelves are fixed in them. The grooves should be as strong and reliable as possible, as they hold all the elements of the glass flower rack.
When choosing much smaller sizes of structural elements, it is better to use such a device not for flower vases, but for the exhibition of various figurines and souvenirs of small sizes. The manufacture of the lower shelf in wooden design will be more reliable.
Glass structures are practiced for growing flowers on the windowsill. The rack does not absorb a lot of light and is compactly placed in the window opening.

Video

In this video, the master will show how to make a flower shelf on the windowsill from an old cabinet. Simple, comfortable, looks great.

Probably, every lover of indoor plants at least once thought about how to make flower shelves with their own hands and about their varieties.

Of course, you can just go to a specialized store and purchase the desired design.

But if you want to save money, show imagination, creativity, then we advise you to master this simple science, which will give you the opportunity to unleash your creativity and make the design exactly the way your soul desires!

Why do we need flower shelves?

Tell me, what person does not like flowers? It seems that such people simply do not exist. It is pleasant to give and receive bouquets, walk around your hometown, admiring ornamental plants and inhaling wonderful floral aromas.

And what happiness to wake up in the morning and see this beauty around you! There is no better home decoration than flowers.

But what to do when plants have practically filled the entire living space? Do not throw away your beloved green pets that were raised with such labor, care and love?

Do not despair! Shelves for indoor flowers will come to the rescue! This will require only your imagination, skillful hands and the right material.

And then you think: “Everything is in order with the imagination, skillful hands also seem to be available, but the material ...”.

Chin up! There will always be items in the house from which you can build a useful structure, and if not, then acquiring the necessary material will be much cheaper than buying a finished product.

There are many options for flower shelves. What type is right for you?

The answer to the question depends on certain nuances, namely:

number and type of plants;
type and interior of the room;
tastes and preferences of the grower.

These factors must be taken into account before proceeding with the process of manufacturing shelves.

If we talk about the number of flowerpots, then we can distinguish:

single;
double;
multi-seat shelves for flowers.

Shelves of the first type imply the presence of a single flowerpot. Such structures are designed for both houses and streets. Climbing plants look great on single shelves.

In turn, single shelves are wall and floor. The floor shelf, as a rule, is large, and a plant-tree often flaunts in a flowerpot.

The second type of shelves is suitable for plants with similar conditions.

Multi-place coasters head for the wall, often taking up all of its space. Wall shelves of this type are small, which cannot be said about floor shelves that can accommodate dozens of flower pots.

If the only free place for your green pets is a corner, it doesn’t matter! A corner shelf will come to the rescue. Up to seven plants can be freely placed on it. This type of shelf is suitable for both the floor and the wall.

Materials for creating designs for flowers

Depending on the material used to make the flower shelf, there are:

made of metal;
plastic;
wooden structures;
glass;
combined.

Shelves made of metal are stable, have an impressive weight, always look expensive and elegant. But you should remember to treat them with anti-corrosion agents.

Do not make a plastic shelf with your own hands. It can only be selected in a store or in a photo on the Internet and purchased at reasonable prices.

Such a shelf is convenient both in use and when cleaning, has an attractive appearance and a variety of colors.

A wooden flower shelf is popular, but it is not so easy to make it.

It is known that plants need constant care, including watering, and a tree from water can begin to rot - in this case, the shelf will last for a short time. Therefore, any wooden object requires special surface treatment.

Glass shelves are very beautiful and exquisite. But making them is only possible if you have experience working with glass. Also, this kind of shelves require special care.

In the manufacture of combined shelves, several materials are used (wood and metal, glass and metal, etc.).

Creating simple designs for flower pots

It's time to get acquainted in detail with the manufacturing process of some types of shelves.

A flower shelf on the windowsill will be suitable for any window.

To make a flower shelf on the windowsill with your own hands, you will need:

a pair of wooden slats;
glass (quantity varies by window size).

When choosing glass, you should pay attention to its thickness (not less than 0.5 cm), so that the design does not collapse under the weight of the flowerpots.

A suitable material for the rails is wood. The advantage of this shelf is the ability to transmit light and illuminate all plants with it to the fullest.

For example: the thickness of the shelf is about 50 cm, which means that the thickness of the recess into which the glass is inserted is approximately 25 - 30 cm. The slats must be selected with a thickness of 45 cm.

Also make the lower part of the shelf wooden, thereby reducing the load on it.

Shelf on the window, made of glass, but only looks great, but also holds up to 15 plants.

The corner shelf for flowers can accommodate both one and several flowerpots. For a couple of plants or more, it is recommended to build a shelf in the form of a rack.

If you like a shelf for one plant, then the following materials are needed:

the rest of the chipboard;
part of a steel pipe;
fasteners.

Corner shelves are easy to make. You will need a chipboard sheet of suitable shape and size with a hole made for the pipe.

Using fasteners, we connect these elements, then we hook the shelf to the wall, and fix it. The rest is a flight of your imagination: decorate the shelf in accordance with the interior of the apartment / house.

The flower shelf made of glass bottles is very original! And the attributes for its manufacture, most likely, can be found in every home.

You will need empty beer bottles (from four pieces) or champagne bottles, a couple of boards and fasteners. Bottles must be with a long neck.

First, prepare the boards: sand them and open them with varnish. Now make holes in the boards (on the sides), insert bottles into them, secure.

It should be noted that such flower shelves are quite durable, that is, they are able to withstand a large load.

Then put the shelves one on one. Thus, you will get a whole rack for flowers! Such a shelf will appeal to many, because it does not require intricate materials and is easy to manufacture.

More complex but elegant shelf options

The floor shelf made of pipes has a lot of advantages: it is compact, does not take up much space, while each plant has free space.

Such a shelf looks beautiful and aesthetically pleasing. Buying a pipe floor shelf from a store will cost you a pretty penny.

Your task is to figure out how to make a pipe flower shelf with your own hands. This, of course, will require some costs, but still save money at least twice (compared to buying a finished product).

To make a floor shelf from pipes with your own hands, you will need the following materials: plywood (about 20 mm in size), furniture pipes (5 m long), furniture fittings, putty, wood paint and decor elements.

First, it is worth making a surface, the dimensions of which can be selected from a photo on the Internet and made similar to these drawings.

Plasterboard flower shelf looks quite nice. But, unfortunately, the drywall shelf is not practical. When caring for flowers, moisture can get on the material, and drywall is known to deteriorate from water.

One way to avoid this is to attach glass shelves to the drywall frame. With proper care, such a shelf is durable and beautiful.

First, think over the design of the shelf, imagine the result that you would like to see in the end. Next, draw up a diagram of the future design.

This is where your imagination comes into play! But do not forget that the shelf should be in harmony with the interior design. If nothing comes to mind, then you can view photos of such shelves on the Internet, maybe your inspiration will wake up!

At the next stage, make all the necessary calculations, purchase materials that will come in handy (drywall, glass, fasteners, decorative elements, etc.).

It should be noted that the floral plasterboard design with glass shelves looks very elegant with backlighting.

How to make a shelf for flowers correctly?

Let's sum up all of the above. If there are already so many of your green pets that there is simply nowhere to place them, and the budget at this stage does not allow you to purchase an expensive flower shelf, then do not despair!

It's time to be smart and test your own strength. And who said that a homemade item is worse than a purchased one? The main thing is to approach the matter responsibly and creatively.

So, how to make a shelf for flowers with your own hands? First, decide where the structure will be placed. It can be a window sill, a corner, or a great flower shelf on the wall.

Do not forget that the type of shelf should depend not only on the personal preferences of the grower, but also the product should harmoniously fit into the interior of the home.

At the next stage, decide on the material that will be used to make the structure, familiarize yourself with the intricacies of the construction of the selected type of flower shelf.

Sometimes, there is not enough space on the windowsills to place your favorite flowers, seedlings. Of course, if you have extra money, you can buy a bookcase, a shelf for plants. To save money, make these devices to your liking, make such a system with your own hands.

How to make a plant shelf out of wood?

There are many options for such products, choose the one for which you have materials. You can make a high shelf or not.

Notice how beautiful this one looks. Here you will put several flower pots, each plant will be lit by the sun. To make such a miracle, you will need:

plywood;
jigsaw;
acrylic or oil paints;
brushes;
self-tapping screws;
boards;
roulette.

First, on a sheet of plywood, you need to draw with a pencil the outlines of the sides of the future flower girl. On the reverse side, they are wavy, from the one where the shelves will be located, you need to draw parallel segments.

Cut out the pattern with a jigsaw. Mark the distance from one edge of the shelf to the other, based on this figure, saw the boards of this length.

Paint them and the plywood sides white. When the coating dries, using a stencil, you can apply a pattern to the plywood with another paint. When it dries, then attach the boards to the sawn straight parts of the plywood using self-tapping screws, while two self-tapping screws must be screwed on one and the second side of each shelf. Work completed.

If you don’t have a jigsaw, don’t know how to use it, or are looking for an easier option, then another shelf will do.

To recreate this model, use:

boards;
bars of small section;
paint;
brush;
small corners;
self-tapping screws.

Here's how to make a flower shelf so it's three tiered, down on the windowsill you can place the plants under the bottom tier.

Saw off the first board so that it is as long as a window sill or a little shorter. The second tier will be above it. You can make this element the same length as the first one, or cut it by a third or half. Also determine the size of the top shelf yourself, depending on how many flower pots you need to place.

Pick up the bars of such a length that they are higher than the planter along with the plant planted in it, add a few more centimeters so that the flower does not rest against the shelf located above it and is well lit.

As you can see, on the right and left, the shelf rests on a base of bars, assemble each of the 4 planks, connect with flat corners and self-tapping screws. The left rectangle is high, fasten one more bar across it, in order to then attach the shelves here using the corners of the self-tapping screws.

On the right side, the middle shelf rests on two vertical bars, and the top one on one. Fix all the elements well, then leave the flower shelf the same or paint it. After it dries, you can install the plants and enjoy the vacated space.

If you do not have wide boards, this is not a reason to give up. Use subtle by studying the following master class. As you can see, the height of this shelf for flowers is 1 m 20 cm, its length is the same, and its width is 28 cm. The distance between the shelves, depending on the height of the plants, is 35–40 cm.

Here is a list of materials and tools you will need:

boards;
bars with a section of 20 cm;
roulette;
self-tapping screws;
saw;
stain or varnish for wood.

Sequence of work:

Lay on the work surface in parallel, at a distance of 28 cm, two bars, if they are of different lengths, saw them off so that they become equal to 120 cm. Attach three bars of a length of 28 cm perpendicularly at the same distance.
If some flowers are large and others are not, then arrange them according to their height, make some shelves more spacious in height and others less.
Saw off the board so that its length becomes 28 cm or as large as the width of your window sill. For one shelf you will need 2 pieces.
Lay them parallel to each other. From above, place perpendicular boards 120 cm long, stuff them into these two rivers, attaching them on one side and the other.
Attach these shelves with self-tapping screws to the transverse bars that are on the vertical racks.
Coat the wooden parts with stain or wood varnish, wait until they dry. Now you can arrange the plants.

If you need to quickly make a shelf for flowers, then take:

two straps for bags;
8 nails;
wooden board;
saw;
a hammer.

Saw the boards to the same length, if you wish, you can paint them or leave them in such a form to give an antique effect. Using the adjuster, make sure that the length of the belts is the same. Attach each to 1 and 2 boards on both sides, hammering nails here. Then you can arrange flowers and other interior items.

Flower shelf made of plastic, glass

This model will allow you to place many small pots of violets, rooting cuttings and leaves. To make such a flower shelf, you need:

plastic window sills;
nickel-plated or galvanized pipes;
two brackets;
nine flange mounts.

If you have one long plastic window sill, then cut it into 3 identical pieces. If there are several of the same size, then you will use them. Using a special nozzle on a drill, make three holes in each shelf. In this case, two should be near the corners, in the third in the middle near the other side of the plastic window sill.

Pass the pipes through the holes, fix the structure with slate fasteners. If the bookcase is near the wall, then attach it to it to fix the shelf. In this case, the plants will need lighting, using small screws, attach fluorescent or phytolamps under each shelf.

A great option is a shelf with glass railings. They will let in the light that plants need so much.

In order to make a glass flower shelf with your own hands, it is better to take tempered glass with a thickness of at least 5 mm. This one is more durable.

If you want to make an openwork, almost weightless-looking whatnot, then take:

durable glass rectangles;
openwork brackets;
self-tapping screws;
adhesive pads;
screwdriver or screwdriver.

If your rectangular glasses are not as long as you need, then cut them with a glass cutter or better ask them to do it in the workshop at the store. Attach openwork metal brackets to the wooden frame of the window using a screw. Put glass shelves on top, fix them with adhesive pads. Place flowers.

It is possible to fix glass elements on nickel or galvanized racks using flange fasteners.

When you walk in the woods, you can take home some snags, intricately curved branches, to then make a beautiful flower stand out of them.

Clean them from bark, dirt, sand with sandpaper. Assemble the composition by looking at how to connect the fragments, where to place the coasters. Combine snags, branches with bolts and screws, having previously made holes with a drill. Saw circles from plywood, fix them on the branches with self-tapping screws.

If you have wooden boxes, then the bookcase rack can turn out like this. The base is made like a ladder, then boxes are fixed on it.

If you have balusters on your farm, then make such a carved whatnot.

Even a wooden pallet can be turned into a flower shelf. Use it in whole or in part.

And here is another great option for using driftwood found in the forest. The basis for such a stand for flowers, shelves are made of plywood. Then the product is covered with yacht varnish.

We make a rack for seedlings with our own hands

It's time to grow it. Experienced gardeners know how often there is not enough space to sow the seeds of various crops. Therefore, vertical shelves will be a great solution to the problem.

You can buy a plastic rack to place all the containers and cups on it.

But it is better to make it with your own hands from plastic boxes for vegetables. See how little it takes to implement such an idea:

four metal tubes;
pieces of rubber hose;
plastic boxes with low sides;
secateurs or scissors.

If you wish, you can paint the boxes to make the design look festive. Or take ready-made colored storage containers.

In this case, 4 boxes were used, for them you will need 12 pieces of hose 15 centimeters long. Cut it with secateurs or scissors.

Put the first box on four rods. To prevent them from crawling out of the hole, attach one wine bottle cork to this place. If they are not available, then you can saw off pieces of branches, thread the rods through the side recesses of the plastic boxes, hammer these pieces of wood into their ends.

Now install one piece of hose on each rod, put the box on top, then the hose sections come again, then the plastic container. Thus, assemble the entire structure, put it on the windowsill. This planter rack will save space and be made to your individual measurements.

The room must be ventilated periodically. To prevent the seedlings from freezing, place pieces of cardboard on the side to eliminate drafts.

And if there are balusters, make a shelf out of them and wooden boards. This one will also accommodate a lot of seedlings. Sometimes the rack can be rotated 180 degrees so that it does not stretch in one direction.

To solve the problem of watering and the boards do not get wet from the water, put the cups in transparent plastic containers that sell marshmallows or cookies.

The next option is one of the easiest. To implement it, take:

three boards;
rope rope;
drill with a wide drill;
optionally - a means for processing wood.

Drill the same holes in all three boards with a drill. Collect them with a rope rope. As you can see, knots need to be tied on the back of the structure. Hang a seedling rack and it will be well lit by the sun.

The next option is even more creative. For this rack you will need:

empty glass bottles;
wooden boards;
fasteners in the form of screw-in brackets and links.

Drill 4 holes in each board so that the necks of the bottles pass through them, screw the fasteners.

Assemble the structure of two boards and 4 bottles, fix it with brackets.

If you make three of these fragments, then you get a wonderful bookcase or seedling rack.

But the next idea is very simple to implement. Even beginners can make such a rack for seedlings of flowers.

It is enough to fix two brackets on a wooden window frame, fix a pre-painted board on them.

Using the same elements, you can make corner shelves.

Making a flower stand: a detailed master class

To make one, take:

plywood impregnated with a water-repellent agent, 15 mm thick;
17 pcs. flanges of the Joker system;
chrome-plated tubes of the same system with a diameter of 25 mm;
4 things. furniture legs;
self-tapping screws;
screws;
5 pieces. threaded bushing;
furniture edge;
5 pieces. furniture bolts;
car enamel in a can;
jigsaw;
wood putty;
drill;
screwdriver;
pipe cutter for metal;
screwdriver
grinder.

Using the presented drawings, make a pattern, transfer its outlines to plywood, cut it out, and sand the edges.

With a pencil, mark on the lower platform the place where the bolts will be attached, drill holes with a drill. On the elements of the rack, you need to determine where the flanges will be, make holes with a diameter of 2.5 cm. Apply putty to the blanks of the shelves, when it dries, sand these surfaces with a machine or manually using fine sandpaper. Paint the shelves in the desired color, apply two coats alternately, allowing each to dry. Now glue the edging to the ends of the plywood shelves.

With the help of a pipe cutter, we need to get: three tubes 1 m 20 cm long, one 60 cm, and another 90 cm.

When buying pipes, you need to purchase such that their total length is 5 m 10 cm. When sawing, it is better to use a saw so that the cut is more even.

Using the flanges on the lower platform, fix all the tubes, screw them to the base with self-tapping screws.

In the same way, secure the second and all subsequent tiers.

So that the flower stand can be moved, attach the wheels, if this is not necessary, then fix the furniture supports on the lower structure with self-tapping screws.

That's how many ways there are to make racks, whatnots, shelves for flowers and seedlings. But these are not all ideas that can be used. If you want to know even more about this topic, then open the video player.

The first story is for those who have the skills and tools to work with metal. It will turn out a beautiful openwork stand for flowers.

Here is another interesting and quick idea to implement.

In the third video you will learn how to make a seedling stand.

Flowers are the best decoration of any home, so their lovers often face the problem of placing pots and flowerpots. Shelves for flowers, first of all, should be roomy, compact and comfortable, so their construction requires attention and effort. How to make a shelf for flowers, consider below.

The type of shelf that is needed to set the colors depends on many factors, such as:

the number of plants;
type of room;
the appearance of the room;
type of plant;
owner's preferences.

Therefore, when choosing a shelf designed to accommodate flowers, all these factors should be taken into account. Depending on the number of places for flowerpots, shelves are:

single;
double;
multi-seat.

The first option involves the location of just one flowerpot. Such shelves are installed both indoors and outdoors, for example, at the front door. On single shelves, climbing plants look good, with a lot of leaves and flowers. Such shelves are:

wall;
floor.

Floor shelves involve the installation of a large flowerpot with plants in the form of trees.

Double shelves are suitable for plants of the same type that do well under the same climatic conditions, for example, in the shade.

Multi-seat shelves occupy either a specific section of the wall or the entire wall. Such shelves are also available both on the wall and on the floor. In most cases, wall shelves are small, as they are not able to withstand the heavy weight of the soil located in flowerpots, but floor shelves perfectly accommodate several dozen flowerpots.

Photo shelves for flowers:

In addition, flower shelves are angular. This type is able to accommodate from one to seven flowerpots. Also shelves for flowers are ceiling. They are attached directly to the ceiling and involve the placement of climbing plants.

In relation to the material from which flower vases are made, they are divided into:

wooden;
plastic;
metal;
glass;
combined.

Shelves for flowers made of wood are the most common, but at the same time not very practical. As you know, the tree is unstable to moisture, and the flowers require frequent watering and spraying. Therefore, before the construction of such a shelf, careful processing of wooden parts is required, otherwise, such a shelf will not serve its owner even for a year.

It is impossible to build plastic shelves on your own, they are sold in specialized stores. Among the advantages of this type of shelves are practicality, a variety of shapes, ease of use, ease of maintenance and a variety of colors.

Metal shelves for flowers are stable and quite heavy. At the same time, one should not forget that metal is a material subject to corrosion. Therefore, it requires careful treatment with anti-corrosion solutions. Metal shelves are decorated with forged parts; they look beautiful and elegant in any interior.

Glass shelves for flowers are particularly sophisticated, as they make the room more airy and light. For the construction of such shelves, you must have certain skills in working with glass. It is possible to decorate the shelf with mosaics, stained glass or printing on glass. This type of shelves requires careful maintenance, so it is very impractical.

Combined flower shelves involve the use of several materials in the process of their construction. For example, wooden shelves are decorated with forged elements, metal pipes are added to glass surfaces, in the form of a frame for a shelf, etc.

DIY flower shelf: a simplified version

This shelf model is distinguished by its ease of construction and low cost, since in the presence of a plywood sheet, the cost of its construction is minimized. The size of the flower shelves and their capacity depend on the size and thickness of the plywood sheet. The thicker the plywood, the larger the shelf will be.

To build such a shelf you will need:

plywood sheet;
two nickel-plated or galvanized pipes;
finishing materials for surface treatment, in the form of varnish or paint.

From the tools you need to prepare:

electric jigsaw;
electric drill with special nozzles;
roulette;
sandpaper.

In relation to the location of the rack, determine the required size of the shelf and its capacity. Make a drawing to accurately calculate every centimeter of free space. In relation to it, draw the contours of the shelf on the plywood sheet and proceed to cutting out the details. It is possible to build a standard shelf in the form of a square or a rectangle, as well as non-standard designs with wavy or elliptical cutouts. It all depends on the interior of the room and the imagination of the manufacturer.

Using an electric jigsaw, cut out the desired shape. On the part, make markings for the installation of pipes. Using an electric drill, drill holes of the required size for installing pipes. All wooden components should be processed with sandpaper or a grinder.

Cover plywood parts with special materials that increase their resistance to moisture and antiseptics, preventing the formation of fungus or mold on the surface of the shelf. The following is the procedure for coating them with paints and varnishes.

The next step is fixing the structure on the wall surface. Attach metal brackets to the bottom of the shelf and drill special holes through which they are fixed to the wall with self-tapping screws. Pay attention to the strength of the structure and the reliability of the connections, since the safety of people near the shelf depends on these factors.

Wall shelves for flowers made of wood: shelving construction

Before the construction of this model, a drawing should be made with which blanks will be cut. The flower rack has the following dimensions:

length - 60 cm;
width - 23 cm;
height - 70 cm.

It will safely accommodate up to ten flower pots, as the rack consists of three levels. To build such a shelf for flowers you will need:

six wooden boards, the length of which is 200 cm, and the section is 3.5x5 cm;
two bars, 200 cm long, with a section of 2x2 cm;
several dozen nails, the length of which is 2.5 and 4 cm;
finishing materials in the form of varnish or paint.

In addition, it is necessary to prepare a tool in the form of a saw, hammer, grinder or sandpaper and a tape measure.

Thin planks will be required for the manufacture of shelves, and from the bars we will make racks for the rack. The first stage includes cutting wooden blanks into parts in the form of eighteen elements. For their manufacture, it is necessary to measure 60 cm from the length of the board.

On the beam, markings are made along the length of 70 cm, four elements in the form of racks will be obtained from it. From the remnants of the timber, elements should be cut out, each 23 cm long.

Put all the racks on the workplace, place them parallel to each other, make markings at the place where the first, second and third shelves are fixed. Their height depends on the type and height of the plants that will be located on them. Each of the shelves consists of six slats. The shelves are connected by the end parts using parts from a 23 cm beam. They are fixed with nails, 2.5 cm long. Using a grinder, process the end sections and the sharp edges of the rack. Cover the finished product with an antiseptic, varnish or paint.

How to build a flower shelf on the windowsill

This type of shelf will fit perfectly into any size window. For its construction, you will need:

two wooden slats;
several glasses, the number of which depends on the size of the window.

When choosing glass, make sure that it is tempered, and its thickness is not less than 0.5 cm. Since the severity of flowerpots will significantly affect the strength of the structure.

For the manufacture of vertical rails, wood is perfect, its thickness affects the thickness of the groove into which the glass is installed. This shelf model has a special advantage: it is able to pass light through itself, so all plants will receive it in full.

If the thickness of the shelf is about 40 cm, then the groove will be 15-20 cm in size. In this case, slats 35 cm thick will be required. The combination of wood and glass makes this shelf not only practical, but also beautiful. In addition, in order to lighten the load on the shelf, it is recommended that its lower part also be made of wood. Such a shelf for flowers on the window can accommodate up to fifteen flower vases.

Combined flower shelf: wood and metal

Such a shelf is wall-mounted and consists of welded metal racks and wooden partitions on which flowers are located.

To make a shelf, you will need metal rods with a diameter of 10 mm. When arranging the floor version, the use of metal corners is recommended. Before the construction of the shelf, it is necessary to determine its location, and in accordance with this parameter, its size is selected.

We suggest considering the construction of such a shelf with dimensions:

side contours of length - 90 cm;
width - 20 cm.

This option implies the presence of four shelves with an interval of 30 cm. Small flowers fit perfectly on the shelf, and the top shelf is suitable for tall plants.

The racks are connected by welding the crossbars together, and a wooden structure holding the flowers is already installed on the frame.

The number of elements for strapping should be sufficient for the construction of four tiers of the shelf. The welded structure after manufacturing is painted with paint and coated with an anti-corrosion solution.

To fix the structure on the wall, use self-tapping screws. Watch out for the strength of the structure and the reliability of fastening. The interval between fixing the shelf with fasteners is a maximum of 50 cm. This is followed by painting or varnishing wooden surfaces. After their complete drying, the shelf is ready for its intended use.

Floor shelves for flowers from the windowsill

An original and practical solution is to make a shelf for flowers, using a window sill from plastic windows. This material is characterized by high strength characteristics, is not subject to moisture and is easy to maintain, therefore it can serve as a shelf for many years.

To make such a shelf you will need:

plastic standard window sill, 390 cm long;
three pipes coated with zinc;
nine flange mounts;
two brackets.

First of all, it is necessary to cut the plastic window sill into three parts, each 190 cm long. These parts must be drilled so that they have three holes for installing a galvanized pipe. Two holes are located at the edges, and one is in the middle, slightly pushed forward. In all workpieces, holes must be drilled in the same place. Otherwise, the shelf will turn out to be crooked.

Next, three pipes are cut, which should have the same length. The structure is fastened with screws tightening the flanges. The shelf is installed on the floor using the same parts. The lower fixation of pipes is carried out using screws and flanges. To increase the strength and stability of the shelf, it is necessary to pull the brackets from above, which are fixed to the wall with screws.

Corner flower shelf: phased construction

Corner shelves for flowers are designed to install one or more flowerpots, in the second option, you should make a corner shelf, in the form of a rack.

To make a standard shelf to accommodate one flowerpot, you will need the remains of a chipboard sheet, a pipe, preferably made of galvanized steel, and fasteners that will help connect all the elements together and secure the shelf to the wall.

Such a shelf is assembled very simply, it is enough to cut a chipboard sheet of the desired size and shape and make a hole in it for installing a pipe. Flanges and screws will help to connect wooden and metal blanks to each other, and brackets will fix the shelf on the wall. This is followed by the procedure for painting the shelves, in accordance with the overall design of the room.

Making a multi-tiered flower shelf with your own hands

This shelf model involves the installation of a large number of flower pots, but at the same time it takes up a minimum of free space. The manufacture of such a shelf is relevant for owners of small apartments or houses. At the same time, the shape of the shelf does not prevent light from reaching any of the pots, so that the flowers are in almost the same climatic conditions.

The main components of such a shelf are a floor platform with four legs, on which racks made of chrome-plated pipes are fixed. These racks hold four shelves located at different heights from the floor.

To build a multilayer flower shelf, you will need:

multi-layer plywood, with a minimum thickness of 1.5 cm, preferably with a water-repellent impregnation;
several chrome pipes, 2.5 cm in diameter, with a total length of 5.1 m;
seventeen pipe flanges;
five threaded bushings;
four furniture supports;
several screws and self-tapping screws;
five furniture bolts;
furniture edge in the same color as the pipes;
aerosol can, for painting the structure;
putties for working with wooden surfaces.

This shelf must be stable, as it will withstand the weight not only from flowers, but also from wet, heavy soil in flowerpots.

In addition, you will need the following tools:

jigsaw;
pipe cutting tool;
screwdriver;
electric drill;
Sander;
screwdriver.

This stand will delight its owners not only with beauty and functionality, but also with practicality and elegance.

Using the drawings of the flower shelves, cut the plywood and prepare the parts for the lower shelves:

Process all blanks with a grinder. On the part that is located below, make holes for installing furniture bolts. On blanks in the form of shelves, measure the places where racks and sections will pass through them for mounting flanges. To drill holes for pipes, it is recommended to use a drill with a diameter of 2.5 cm.

To smooth the surface of the sawn shelves, use wood putty. After it dries, use a fine mesh for sanding. Next, paint the shelves with an aerosol can of paint of the desired color. After the paint has completely dried, glue the end sections of the shelves with a furniture edge.

one in the form of a 60 cm rack;
one rack per 90 cm;
three racks of 1.2 m.

Use a pipe cutter to cut metal. It will provide a beautiful and smooth surface of the ends. In its absence, it is possible to use a hacksaw for metal.

Completion of work includes the assembly of all parts. Such a prefabricated structure will delight the eye in any corner of the room, but in order for it to last as long as possible, it is necessary to ensure that all parts are securely attached to each other.

First, all racks are attached to the lower base. Their fixation is carried out using furniture bolts. Flanges are put on the racks and screwed to the main part. Their fixation occurs with the help of self-tapping screws. Similarly, all shelves are fixed. The interval between them is 30 cm. When all the shelves are installed, you need to attach furniture supports to the lower base. On this, the manufacture of the shelf is considered completed, it is ready to perform its direct duties.

Categories

Popular