Vases by hands from a plastic pipe. Beautiful decorative elements from simple things - a vase from a pipe with your own hands. Floor decoration

All kinds of vases are great for decorating the interior. Floor, table, hanging. Of course, you can buy them in the store, but more often than not, beautiful vases can hit your wallet hard. What to do in such a situation when you want a vase, but there is no way to buy it? Make your own cardboard vase!

Usually, real flowers are not placed in cardboard vases, since cardboard lets water through, but for dried flowers and decorative artificial flowers, such vases are perfect!

A handmade vase will turn out to be an interesting and entertaining pastime, and the result will delight you and your loved ones. We offer you several master classes on creating cardboard vases on your own, you will find the execution schemes below.

Floor decoration

To create a beautiful floor vase with your own hands, we need:

cardboard tube;
corrugated or thick cardboard;
PVA glue and hot glue;
scissors;
newspapers;
putty;
sandpaper.

From a cardboard tube we create the base of a vase. It can be cut to the desired size.

Now we will make the curly walls of the vase. To do this, draw and cut blanks on thick cardboard. You need to make them as much as possible to make the vase strong.

We glue the pipe to the base (cut a circle of a larger diameter than the pipe itself). We glue the blanks around the entire perimeter of the vase, as shown in the photo.

Prepare newspapers. We cut wide strips of them and with the help of PVA glue we glue our entire vase blank. Apply again with glue and leave to dry. Then we will process the papier-mâché shape: level it and dry it near the battery for at least a day, preferably more.

And finally, the last step is painting the vase. You can choose one or more colors and paint the vase in any way. Paint is best taken waterproof acrylic or varnish.

A beautiful and original DIY floor vase is ready!

In order to make such an interesting vase, we will need the following materials:

cardboard tube;
sheet cardboard;
PVA glue and hot glue;
newspapers;
paints;

We measure the desired length of the pipe. You can make a table or floor vase. The bottom is cut out of cardboard and glued with hot glue, let dry.

Our vase will be made of cardboard and paper, so the next step is to take newspapers and cut narrow strips of paper. We fold each strip in half, and then twist it into spirals, smearing it with PVA glue or hot glue. Glue them to the cardboard tube. The space between the spirals can be filled with beads or beads, or you can use cereals or beans.

After all the spirals are glued and the glue has dried, you can start painting. We apply several layers of paint on a vase, leave it to dry completely. Then we apply several layers of varnish, wait until it dries.

The vase is ready!

small vase

Such a vase made of cardboard looks very interesting. It is made as simple as possible, and to create it you will need:

cardboard box;
glue;
compass;
scissors;

First of all, we will cut the box into parts to make it easier to work with. Then draw circles with a compass. Their size will depend on the size of your vase. You can make it as big or small as you like. We start with the largest circle. Each next circle should be 3 mm smaller. A vase can be assembled in different shapes - narrowed to the bottom or to the top. Cut out the circles. And we begin to collect our vase. Depending on how you decide to assemble the vase, we put the circles on top of each other, pre-lubricating each of them with glue.

The vase is ready. It can be covered with paint and then varnish, or you can use only varnish, preserving the original color of the cardboard and its texture. Looks very stylish!

Moreover, such a vase can be adapted not only for flowers, but also for anything.

Cardboard strings

To create such an interesting decorative vase, take:

cardboard tube;
thick cardboard for the bottom;
leg-split;
PVA glue;
acrylic spray paint of any color.

We cut the pipe to the desired height of the vase, cut out a circle of slightly larger diameter from cardboard than the pipe - this will be the bottom of the vase. Instead of cardboard, you can take a piece of plywood. Glue the bottom to the cardboard tube with glue. It is best to take building glue.

In a container, dilute the glue with a small amount of water, put the twine thread into the container until the material is completely impregnated.

For such decoration, only natural twine is suitable, since synthetic twine simply simply does not soak and stick.

Now we wrap the pipe with impregnated threads from the bottom up. Wrap tightly so that there are no gaps between the threads.

Let's move on to painting the vase. Spray paint is best to paint the product on the balcony or on the street. It is best to cover the surface and the space around with paper or cling film, put on gloves on your hands.

Such interesting vases can be created with your own hands, using only cardboard, fantasy and some decorative elements. Great!

Video on the topic of the article

Watch the video compilation for inspiration.

What makes our home truly cozy? Of course, nice and stylish little things! An important element that complements the design of your apartment or house can be floor vases.

And here is the good news for you: it is not necessary to spend a lot of money on expensive designer novelties. You can make floor vases with your own hands, and from rather ordinary raw materials!
Today you will learn how to make a beautiful floor vase from waste material with your own hands easily and efficiently.

Ready to create? Then let's go!

Do-it-yourself floor vase from a jar

Sometimes you can create the most unusual things from the simplest materials. Look at this vase, would you think that the usual three-liter jars served as the basis for it? That's it!

Admit it, you want one? Then take out the reserves of creative energy from your pockets and go!

To create a floor vase from a three-liter jar, you will need:

Two cans with a volume of 3 liters;
One tea saucer;
One plastic container from canned food;
PVA glue;
Cardboard trays for eggs;
Silicone glue "liquid nails";
acrylic paint;
Decor elements of your choice;

Stage No. 1

We create the basis of our vase. To do this, we take two jars, fasten the bottoms with silicone glue, and glue a saucer turned upside down to the neck of one of the jars. It will serve as a stable foot for the future masterpiece.

Then we cut off the plastic container from the canned food and attach it to the neck of the upper jar with glue.
We leave to dry during the day.

Stage No. 2

During this period, we can soak pre-shredded egg cartons in water until completely limp. After that, the cardboard should be squeezed out well and mixed with PVA glue until a homogeneous mass is obtained.
We apply the gruel on the base of our vase in an even layer.
We leave for two days.

Stage No. 3

After the workpiece is completely dry, we level the texture with alabaster.

Stage No. 4

In this form, the vase is completely ready for the final stage of decoration - decoration. Use your own imagination or the tips that we will give below.

Do-it-yourself floor vase from plastic bottles

Another great waste-free recycling option. Do not throw away plastic bottles, you can create real masterpieces for your home from them!

A floor vase from plastic bottles can be made in different styles. For example, an ordinary five-liter bottle with a cut neck, wrapped in thin birch bark, can be an excellent option.

Idea: "Dress" a plastic bottle in a stylish "sweater" crocheted or knitted. Such know-how will pleasantly surprise guests and fill your home with comfort and warmth.

Floor vase made of cardboard and papier-mâché

Yes, yes, you read that right, you can also make a stylish floor vase out of cardboard. It is indistinguishable from an expensive designer one, just believe me. And if you don't believe it, see for yourself.

To create a do-it-yourself cardboard floor vase, you will need:

Cardboard tube (can be taken from under the linoleum roll);
Thin cardboard;
hot glue;
Newspapers and papier-mâché egg trays;
polymer putty;
Sandpaper with fine dusting;
PVA glue;
Acrylic lacquer;

Stage No. 1

We attach a pipe to the cardboard base and draw a shape for the future vase. We make 30 identical patterns, cut them out.

Stage No. 2

We glue the cardboard blanks to the pipe, evenly distributing them around the perimeter. Leave for several hours until completely dry.

Stage No. 3

Glue the base of the vase with pieces of newspaper sheets in several layers.

Attention: the layer of paper must be dense enough so that the voids are not visible during subsequent finishing.

Stage No. 4

We soak egg trays in water, wring out and mix with PVA glue. Apply an even layer on the base, let dry.

Stage No. 5

Coat the vase with putty in an even layer. When the mass dries, we level the texture with sandpaper.

Stage No. 6

We decorate the vase. It is convenient to do this with spray paint of any color. On top, you can finish in the style of decoupage, stucco or apply an ornament manually using acrylic paints.

Stage No. 7

We cover the surface with acrylic varnish, leave to dry.
That's all the tricks. Do-it-yourself papier-mâché and cardboard floor vase is ready. Enjoy!

Floor vase from a pipe

Everything is quite simple here. If after the repair you still have unnecessary plastic or cardboard pipes at home, do not rush to throw them away, it is better to make a wonderful vase out of them.

A stylish do-it-yourself pipe floor vase is easy, practical and beautiful.

Just wrap a cardboard or plastic pipe with newspapers, attaching them to PVA glue, paint white with acrylic paint and decorate.

Idea: use old nylon stockings to decorate a floor vase from a pipe. Soak them in PVA, squeeze them well, and then put them on the prepared pipe. Distribute over the entire area, creating curly folds. Let the workpiece dry, and then paint and decorate to your liking.

Do-it-yourself floor vase from newspaper tubes

The now fashionable paper vine weaving technique allows you to create lovely crafts from waste material.

In order to make a chic wicker floor vase with your own hands, you will need:

Newspaper tubes (about 400 pieces);
PVA glue;
Scissors;

Stages of work:

We carry out cross weaving 4 × 4, then we fix it with one tube around. This will be the basis of our future vase. Then we perform seven rows of ordinary circular weaving around the base, gradually spreading one tube at a time.
After that, we begin to remove the walls of the vase, bending and weaving the previously divorced tubes. Moving up, we gradually expand the space of the product up to 22 rows inclusive.
Then we weave evenly without breeding for about ten rows, we cover the product with varnish.
Then weaving continues, narrowing the rows and tilting the tubes inward to the product until about 72 rows.
We expand the neck of the vase for 12 rows and complete the weaving by creating sides in 3 rows. Cut off the rest of the pipes.
We cover the product with a thin layer of PVA, wait until it dries completely. Then comes the final stage of finishing - varnishing. This should be done several times in a row.

DIY floor vase decor

There can be a lot of options for decorating a floor vase, the most trendy of them: wrapping with twine, decorating with glitter, silicone glue, as well as good old decoupage.

Of course, the vase should be decorated in accordance with the style of the room, and the method of its external decoration will depend on this.

Well, since we already have a beautiful vase ready, we can think about how to fill it.

Please note that not all types of homemade masterpieces are suitable for live bouquets, which means that we will also make flowers for floor vases with our own hands.

When creating an artificial bouquet, use the most common tree branches. It looks very beautiful and natural. At the same time, an eco-style vase for greater harmony with the bouquet can not even be painted.
Attaching balls from the remnants of knitting threads to the branches is an excellent and economical option for needlewomen.

In any case, do-it-yourself decorative branches for floor vases have not gone out of fashion for a long time. So feel free to use them in decorating your own home.

No matter how fashion changes, needlework is always in trend. Remember that from the simplest and cheapest materials you can create masterpieces of design art. The most important thing is imagination and a creative approach to business.
Do-it-yourself floor vase is easy, beautiful and stylish. Create and be inspired.

Good luck!

DIY floor vase: secrets, techniques and unexpected solutions updated: April 23, 2018 by: dekomin

Today, it is rare that an interior, like a landscape, does without expressive and spectacular accessories. One of them can rightfully be called a floor vase. In order for it to look stylish and harmonious in the place allotted for it, it is not at all necessary to buy a finished product. It is quite possible to do it yourself, which will be discussed in this article.

Choice of size and shape

Floor vases can be different: high, medium height and width, large and moderate in size. The parameters of a floor vase depend on a number of factors. One of the key is the design of the surrounding space. For example, the dimensions may depend on the footage of a particular room, because the smaller it is, the smaller the vase itself should be. If this fact is not taken into account, the accessory may look too bulky in the interior, thereby breaking the visual balance.

The height of the product can vary from 40 to 90 cm. It is selected, paying attention to the height of the walls and the spaciousness of the room, since an accessory that is too high can visually make the height of the walls smaller, which is unacceptable. The width is selected based on your own preferences, as well as the form available for manufacturing. In addition, it may depend on the chosen style, which should match the interior design.

The shape of the floor vase can be conventionally roundish, square, triangular. Each type has its own nuances, for example, a rounded shape is considered the most harmonious for pouring into different stylistic design directions. You can make it using bottles or even three- and five-liter glass jars. The papier-mâché technique is also suitable for this.

A square floor vase is good for modern interior arrangements. The basic form for its manufacture can be a regular cardboard box. It is somewhat more difficult to make options for a triangular shape, since it is less common to pick up such shapes. Products of this type are often made from improvised raw materials or various constituent elements (for example, newspaper tubes).

Manufacturing methods

You can make a floor vase with your own hands from waste material, improvised means, and even ordinary dishes. Masters make such accessories not only from three-liter cans and papier-mâché, but also from plumbing pipes, gypsum, twine, linoleum. To make it stand out against the background of the interior, as well as harmoniously fit into it, it is better for a beginner to choose to create a variant of a symmetrical rounded shape. At the same time, it is important to take into account: the product looks better against the general background if its shade does not match the color of the flooring, furniture and wall cladding.

From a three-liter jar

Such work is notable for the fact that without drawing skills, it allows you to get a product with an imitation of artistic painting. In addition to the jar, to make a vase, you will need decoupage napkins, acrylic paints, brushes, twine and special glue, as well as the necessary decorating accessories (optional). The method of manufacturing such a floor vase consists of several successive steps:

the surface of the jar is degreased and coated with white acrylic paint;
after it dries, twine (or ribbon) is wound around the neck;
prepare decor elements (cut out of napkins);
they are glued, spreading with a brush, creating a pattern, ornament or other composition;
after they dry, a transparent acrylic varnish is applied on top.

The decor looks beautiful in gold and bronze, and for such a creation of a vase, it is enough to use a contour gel, drawing a simple pattern with it. If you cover such a product with dark paint on top and spray gilding in places with a sponge, such a vase will look expensive.

Out of the box with a beautiful shape

Such vases look quite unusual in the interior, they are very effective, but they are suitable mainly for modern style, as well as landscape compositions. To make it, you need a box (mould), gypsum (cement), a container for forming the internal space and cling film to make it easier to remove the vase from the base:

gypsum is mixed with water until smooth, achieving the consistency of thick sour cream;
it is poured into the box in a small layer;
put a smaller container inside, setting it in the center;
add the mixture to the desired level;
when the composition is completely dry, the vase is removed from the mold;
processed with fine sandpaper and decorated.

If you want to give a picture to such a product, you can do this with spray paint and lace braid. The braid is tightly attached to the base, paint is sprayed over it. If you want more chic, you can add a little silver or gold by applying it with a sponge.

From a plumbing pipe

For such a product, sometimes not only the usual materials at hand are used, but even nylon stockings and knitted fabrics. The design of the future vase depends on the type of the product itself, its material and shape. Variants with kinks are more suitable for decorating the landscape and summer cottages. Products with a straight cylindrical shape are relevant for city apartments.

The best material suitable for work can be called plastic and metal plumbing pipes. They can be pasted over with various decors (including even cereals), or you can give a relief pattern. For example, you can make a plastic trio from pipes of different heights by cutting off their top at an angle. The bottom of such vases is made of cardboard, although if desired and with the appropriate skills, it can also be welded to the metal.

A nylon stocking can be put on each pipe, forming folds. On top, the surface is impregnated with glue and wait until it is completely dry. After the base is created, they start decorating the vases, covering each of them with special spray paint.

The color is chosen based on the characteristics of the color solutions of a particular room in which the accessory will stand. It remains to add a little gilding or even glitter - and the unique decor is ready.

From a paper pipe from linoleum

Such a product can be used for dry branches. Creating it is simple: you will need the pipe itself (you can buy it at a hardware store), twine or rope thread, some cardboard, a hot glue gun and a saw for cutting the pipe. The manufacturing method is as follows:

the required amount is cut from the pipe, having previously determined the height of the vase;
they take thick cardboard and, putting a pipe on it, circle it, and then cut out the bottom;
having glued the bottom to the future vase, they are engaged in decorating it using a rope thread or twine;
the thread is wrapped around the vase from top to bottom, gluing to the base with hot glue (other adhesives can also be used);
tightly wrapping the product to the very top, cut the thread;
for stability, put some paper or small pebbles inside.

Made of thick cardboard and cardboard tube

To create a Greek vase, you will need old newspapers, a cardboard tube and several large boxes that you can get from the store. You will have to cut out the base of the vase from them, so it is advisable to take boxes of approximately the same size (it makes no sense to glue them). This option for making a floor vase is more labor-intensive, but the look of the finished product will please not only the owners of the house: such a product will be a rather bright and memorable accent of the interior. Create such a masterpiece using the following technology:

correlate the height of the pipe, the desired height and the size of the available boxes (everything must be the same);
a vase template is cut out, workpieces are circled around it, cut out and folded in half;
when there are enough of them, they paste over a cardboard tube (it will look like an accordion);
after that, they tear the newspapers into pieces, soak them with PVA glue and create the base of the vase, pasting it from top to bottom in several layers, trying to make the shape even;
after the newspaper, you can stick several layers of toilet paper;
when it dries, the surface is covered with dark paint;
an ornament is drawn with contour gel or special contour paint;
you can cover the vase with another thin layer of paint on top, and then mark the relief pattern with bronze or gold paint.

To make the vase look expensive, you need to make it as carefully as possible, paying attention to the neck and bottom. When coating, it is important to color them too, the lines of the pattern should be even, and when ornamented, they should be identical.

Decoration of the finished product

Decorating a finished accessory will require knowledge of the basic skills of style, without which it is difficult to make it appropriate in a particular interior. Today, fashion trends are aimed at a combination of conciseness and functionality. The decor should be minimal, it is important that, despite the apparent simplicity, the product looks status, spectacular and professional, as if it were purchased in an expensive store. Therefore, it is necessary to approach the issue of decorating especially carefully.

Depending on the type of material used and the technique for making a floor vase, you can use:

mosaics, including home-made from multi-colored tiles and mirrors;
flat buttons of different sizes and shapes;
coins;
coarse salt;
cereals, sunflower and pumpkin seeds;
dry branches of different lengths and curvature;
cut branches;
twine;
tree bark;
newspaper tubes;
office rubber bands;
bracelets made of beads on a rubber thread;

A large floor vase adds zest to the interior, the room looks more interesting. It's even better when this vase is made by hand.

The variety of models is amazing, but one thing unites them - they are made from simple improvised materials. Anyone can make such a vase.

DIY floor vase: features

As a rule, floor vases are heavy and large. The heavier the vase, the more difficult it is to tip over and break. Therefore, if the floor vase is made with your own hands and turned out to be light, you can pour heavy stones into it. Perfect for pebbles.

Be patient, because this work is not fast, even if you decide to make the simplest model of a floor vase with your own hands, simply by decorating it. Be prepared for the fact that the product is large, it will take time to place the rhinestones and sequins in their places. Not to mention the complex elements.

Do-it-yourself floor vase: materials and methods

From the basic materials you will need scissors, glue, a vase mold and those details or substances with which you can decorate the vase.

Cardboard vase

An interesting solution was to make a vase out of cardboard. This is the most budgetary and very convenient option, because the vase can be given a variety of shapes and sizes.

Think about the size and volume of your vase. Cut out the sides of the cardboard box and tape them together. Treat the upper cut at the neck with plain, colored or paper tape so that the edge does not fluff.

Glue the vase with decorative elements. In this case, these are small pebbles planted on glue tightly to each other. One disadvantage of such a vase is that you will have to decorate the cardboard with a dense canvas without gaps. And if you suddenly decide to leave gaps, then they need to be painted over. It is impossible to prevent guests from suspecting that this is a budget version of a vase. Therefore, the cardboard should not be visible in any way.

Don't stop at just decorating a vase. Decorate it further. For example, stick dotted small and large rhinestones.

Metal-painted vase

An interesting solution was a vase painted in metallic color and aged. To work, you will need a form for a vase, small figures, details, buttons, laces, glue and paint. If you want to get the effect of an aged thing, then the paint should be of two colors of a dark and light shade that combine with each other. For example, if these are warm shades of metal, then the colors should be dark metallic and gold for an aged effect. If you have chosen cool shades, then the colors range from metallic gray to silver.

As a form for a vase, an elongated square cardboard box or a pipe from linoleum is suitable. In the second case, the vase will turn out to be round and elongated.

Treat the top edge of the vase by gluing a protruding strip, or just wrap it with tape. Paste the form with prepared small details, grouping them with a dense cover or patches, combining them with large figures.

Wait for the glue to dry before you can start painting. First apply dark paint, preferably in two layers, so that extraneous shades do not shine through. If you decide that the craft should be aged, then use a large brush with dotted strokes of light paint only over the protruding parts, creating a worn effect.

If you want the vase to be plain, then after staining you can varnish the surface. And if the vase is aged, then in this case it is not necessary to varnish, otherwise the desired effect will not work.

Take your time and wait for the vase to dry, it can take about a day.

Floor vase decorated with threads

You will need a large vessel. Also, for a form that can be decorated, a pipe from linoleum is suitable. Also stock up on threads, glue and small elements that you want to finish the composition with. For the pattern, the same thread glued over the general background, as well as buttons, rhinestones, or even voluminous flowers from threads, can be suitable. This is what a vase decorated with three-dimensional flowers will look like.

How to make such flowers will be described below, but first make the vase itself. To do this, coat the finished vessel with glue and wrap tightly with a thread. It must be applied in one layer. Let the vase dry.

If you want to decorate a vase with flowers, then they need to be made separately, and then fixed on the vase. There are two color options, these are the ones shown above and from the floss on the spring.

To make the same flowers as in the picture above, you will need a bottle, cling film, glue and thread. Put cling film on the bottle and on the film across the bottle, start making one petal for the flower. Fold the shape of an elongated drop from a piece of thread. Spread glue on the next piece of thread, a little more than the previous one, and wrap the first drop around the outer edge, repeating the shape and firmly pressing the layers of thread. You will get a drop, which with each layer of thread will become more and more.

Continue until you feel that this petal size is sufficient. Wait for the craft to dry and peel it off the bottle. You have only one petal in a curved shape following the shape of the bottle. And for a whole flower you need 4 or 5 petals. Do the same until you get the required amount.

Glue the petals to the vase and plant a large rhinestone or bright button in the center, the flower is ready. Do not stop there, make a magnificent pattern consisting of several elements.

Now consider the option of a multi-colored flower made of floss threads and springs. To do this, you will need threads of a beautiful color, a long wire, a pen and a rhinestone, either a bead or a button for the center of the flower.

Wrap the wire about 6-7 cm around the handle, you will get a spring. Connect the edges, you get the shape of a drop. Starting from the bottom, pass the thread from one end of the spring to the opposite end, rising to the top of the petal. Follow the same thread path back to the base. The petal is ready. For a whole flower, they will need 4 or 5, at your discretion. Fix the flower on a vase, glue a rhinestone or a button or a bead in the center.

Choose eco-friendly materials for a vase that will stand in a living room. You should not risk your health and put materials in the house that release toxic compounds into the air.

Be patient, because to make a beautiful vase means to make a complex product. Before getting its final appearance, the vase goes through several stages: cleaning, decorating and in some cases painting.

Choose a color scheme and material for decorating a vase that fully matches the style of the room in which you plan to put the finished floor vase. Otherwise, a feeling of disappointment may arise, and all the work will go down the drain.

After repairs, there is always a lot of garbage in the house, but you should not rush to throw it away, because among it there will definitely be some interesting items that, after decorating, can look like great accessories. An example of this are pipes that can be turned into stunning vases. Next, we'll look at several ways to do this.

Vases from plastic pipes

stocking decoration

First of all, consider how a vase is made from a plastic pipe with your own hands. For these purposes, it is best.

So the instruction looks like this:

If there is a segment longer than 60 cm, it must be divided into 3 parts.
Next, the ends of the blanks need to be cut obliquely.
Then you need to soak the stockings with PVA glue and squeeze out the excess suspension.
After that, the stockings need to be pulled over the pipes to end up with twisted folds.. In this form, the product must be left until the glue dries.
Further actions depend solely on your imagination, for example, products can be painted with different colors and glued together. For stability, a cardboard circle or square can be glued to their bottom. As a decor for crafts, beads, beads, small seashells, etc. are an excellent option.

The result will be a very beautiful product that will look expensive, despite the fact that the price of materials is minimal.

In the photo - the implementation of the combined decor

Combined decoration

The technique for performing the product in this case does not differ from the one described above. The differences are only in the way of decoration.

The process looks like this:

The stockings are stretched from below and above the blanks, and a “naked” area remains in the middle.
The space between the stockings must be smeared with PVA glue.
Next, the surface treated with glue should be sprinkled with grits. Which one is up to you to decide.

After the glue hardens, the blanks need to be glued and painted. For stability, you can make a cardboard stand and paint it in a suitable color.

This completes the manufacturing process.

From a metal pipe

If the edges of the metal pipe are evenly sawn off, then it is also suitable for our purposes. The best option is to prepare it immediately with a stand.

Below we consider one of the options for how to make a floor vase with your own hands from a pipe of this type:

First of all, the blank must be pasted over with ordinary toilet paper. In this case, small folds are allowed.
Then two layers of black paint should be applied to the paper.
After that, over the black paint, you need to apply varnish with bronze powder.
Additionally, the product can be decorated with beads or glass beads.
To complete the bottom, you will need mounting foam. The craft must be placed on a plastic stand and direct the stream of foam down. When the foam hardens, it can be tinted with spray paint.

Advice!
Unusual edges of the product can be made using a welding machine, simply by melting them.
As a result, they will turn into a fancy lace.

Of course, such a product is not intended for fresh flowers, since it will not be possible to pour water into the container, but the composition of dried flowers in such a vase will look very interesting.

From a cardboard tube

Manufacturers of linoleum, when packing it inside the roll, lay a pipe made of thick cardboard, which is an excellent material for making a vase. As always, to get an original result, you just need to show a little imagination.

Below we will consider one of the options for making a vase from a cardboard tube with your own hands. Before starting work, the following materials must be prepared for this product:

So, the work is done in the following order:

As in the case of plastic products, in order to make vases from linoleum pipes with your own hands, you first need to cut a cardboard blank into three parts.
Next, all three parts must be glued with PVA glue and pulled together with copper wire.
Without waiting for the glue to dry, you need to stick masking tape on the joints.
After a day, when the glue finally hardens, the copper wire should be removed, after which the workpieces should be wrapped with a cloth dipped in PVA. In this case, you need to form folds.
When the fabric dries, it must be painted with bronze paint. You can use the composition in a spray can.
When the paint dries, you need to “walk” over the entire relief with acrylic gold paint to give the vase a shine.
At the end of the work, the vase can be decorated with twine or other decorative elements.

On this floor vase from a pipe from linoleum is ready. Of course, it is not necessary to perform all the steps exactly. Based on this idea, you can experiment and come up with your own product design.

Categories

Popular