Black color is made of wenge wood surface. Acrylic impregnating varnish with antiseptic for wood and stone. Combination with other colors

Any wooden surface needs protection. Constant exposure to moisture and other negative factors causes swelling of the fibers, deformation of the product, development of rot and fungi. Acrylic varnish for wood from TM VGT is designed for deep impregnation and protection of wooden surfaces (except floors) from decay.

It is also used for decorative finishing and protection of brick, concrete and other mineral bases, as well as natural and artificial stone from fungi, algae, mold. The varnish can be used for exterior and interior woodwork in all types of buildings and structures (A-B), including for which a wet disinfection regime is provided.

The main advantages of varnish for wood

• Forms a transparent, elastic, strong film. The varnish is resistant to cracking even with small deformations of the base.
• It has a greater depth of penetration into the structure of the tree, which provides longer protection against decay.
• It is universal for outdoor and indoor use.
• It preserves the saturation of the color of the decorative coating or the wood itself. The composition is made with a UV filter.
• Produced in a wide range of colors. Varnishes for wood are offered in 12 colors.
• It perfectly passes steam, not allowing moisture to linger in the fibers. A "breathable" coating is formed, which helps to maintain a comfortable microclimate in the premises.

The application of tinted impregnating varnish for exterior and interior works gives the maximum decorative and protective effect.

Wenge color is gaining popularity in the interior solutions of country houses and city apartments. To make interior doors in this color is to bring luxury and elegance to the design. The tree itself is rare and quite expensive. Due to the fact that its shades are dark and varied, almost any door leaf can be turned into wenge, provided that the paint color is correctly selected.

What's the color?

Fashion trends in design have elevated the color of wenge to a height. This is a tree from the legume family that grows in the tropics of Africa. It is valued for its rarity, as well as hardness, strength and interesting texture.

Wenge texture

In design, a door leaf of this color brings notes of aristocracy and respectability. The color is richly dark and deep; it is possible to adapt such interior door leaves to any design, including a minimalist one.

Note! Despite the versatility of the wenge-colored door leaf, it is better to use it in an interior that is closer to the classic one.

Combination with other colors

Any interior should harmoniously combine colors and textures, when it comes to interior door panels, then the choice of color for their coloring is especially carefully approached. Some combination options:

1. Red and red-orange wall decoration in combination with wenge doors will make the appearance of the room dynamic and bright. White and milky can balance and soften the composition.
2. A natural and effective combination of a door leaf painted in this color with a green finish, furniture, textiles. The effect of this combination is soothing and pacifying.
3. Yellow and wenge are a bold experiment. The shade of one and the second color is selected carefully, as the picture may be too bright and difficult to perceive.
4. The interior door with wenge paint and golden color is perfectly combined. This successful tandem creates a unique and unique atmosphere.
5. Blue combines well, but if it is the main one in decoration, then you should choose light colors, dark deep ones can be accents.
6. A combination of white wall and ceiling finishes with contrasting interior doors with wenge paint will become simple and understandable. To dilute a strict interior, any other colors are suitable - green, yellow, gold, orange, blue, etc.

We make a door in the color of wenge with our own hands

There are several options for how to turn another type of wood into wenge without always needing paint. It is worth considering several options: firing and staining in several layers.

Burning

This method of turning a door leaf from pine or other wood into wenge has been known for a long time. Its key benefits are:

1. Color fastness.
2. No need to use paint, stain.
3. It is applied on a door that has natural color defects. For example, blue appears on pine from improper storage in wet rooms, etc. The firing technique will hide this.
4. The technology allows you to create a unique surface structure. Soft and loose layers of wood burn out, creating natural depressions. Hard and dense layers remain in place. The tree takes on an interesting surface.
5. The method is simple, it is easy to put into practice even for a beginner. It does not require special tools to implement.
6. Before firing, the canvas is not prepared, even special grinding is not needed.
7. One of the significant advantages is the “not tasty” burnt wood for beetles and other living creatures, which is important if the doors are used in a private wooden house.

As for the disadvantages of such processing, this is soot and soot, which is certainly from the combustion of wood.

Tools and materials

• Door leaf.
• A gas burner with a nozzle, a blowtorch will not work in this case.
• A piece of hard felt.

Work must be carried out outdoors or in a ventilated area.

Stages of work:

• The first burn - the tree turns black.

• The second burn is the burning of the upper layer. The fact that firing is sufficiently indicated by small cracks that appear on the surface of the canvas.

This is done in one pass, but for this you first need to fill your hand. In addition, there is a danger of overheating the tree, and it will burn out.

After the appearance of characteristic cracks on the surface, the firing stops, the canvas cools. The next stage is this cleaning, after which it will be difficult to distinguish wood from wenge by texture.

But this is not the end of the processing of pine under wenge, it is still covered with a special impregnation for wood, which will give the surface of the door a matte sheen and real nobility of wenge. Additionally covered with a layer of varnish.

Coloring

Applying paint to a door is an easy way to give it the desired color. The choice of colors is huge, which allows you to find the shade that you need. Given that the color of wenge is dark, such paint will not only be able to transform a new canvas, but also restore the old one. This decision is relevant if the house has been renovated, and the wooden door does not fit into the new design.

Paint selection

The choice of paints for painting a wooden door is rich, when buying, take into account the purpose of coating with dye layers:

1. Enhance the natural beauty of wood. This will help transparent varnish, stain, impregnation. With these compositions, it will be possible to update the coloring of the tree or give it a completely new color.
2. Full decoration that hides natural textures. Paints with different bases (polyurethane, alkyd, acrylic, oil, nitro enamel). These are opaque and completely hide the wood base of the door.

Of all these paints, the most popular and in demand is alkyd enamel. It is cheap, and it can also repel moisture, which is important for wood. This paint dries quickly on the door, is resistant to temperature changes. A significant disadvantage is the pungent smell, which disappears for a long time.

Acrylic paint is almost odorless and dries quickly. The consistency of the paint is optimal for working with a brush; it will have to paint the canvas if the door is paneled. The surface will be matte regardless of the number of layers. Its peculiarity is that it is necessary to cover the top with a layer of acrylic varnish, which, like the paint itself, is quite expensive.

Nitroenamel (NE) is considered a durable paint, and only 1-2 layers are needed. Its durability is also excellent. But you can paint the canvas only on the street, since the composition of the paint contains toxic substances.

Note! Interior door paint should be safe and not emit any toxic substances.

Staining with wenge-colored stain is carried out in several layers, until the desired color is achieved. Lacquering is necessary on top if the interior door should have a shine.

Preparation for staining

The appearance and durability of the coating depends on how carefully the preparation for painting the interior canvas is carried out.

First of all, remove the door from the hinges and remove the fittings. Theoretically, it can also be painted on hinges, but in this case it is difficult to achieve high-quality coverage.

The next crucial stage is the removal of the old finish (paint), if any. There are several options for this:

• Thermal impact. This method is implemented if there is a building hair dryer, a blowtorch. Under the influence of temperature, the old paint / varnish swells, and the coating is easily removed with a spatula. The method will not work if there are non-removable plastic or glass elements on the canvas.

• Chemical wash. In this case, solvents with chemical additives are used. They are applied with a brush, spray gun or a simple rag. After the composition penetrates the paint layer, it will swell and be easily removed with a spatula. If there are several layers on the door, you will have to repeat the application procedure as many times as necessary.

If, after removing layers of paint, it turned out that the wood had darkened, it was treated with chlorine bleach so that the color of the wenge turned out as it should. Mix water and bleach in a ratio of 1:3. If there are any defects in the form of cracks, chips, etc. they need to be plastered.

The last step in preparing an interior door for painting is finishing sanding and cleaning from dust.

Painting process

It is necessary to apply paint on the interior door leaf in several stages (layers):

• The primer coat of paint is the first and most important, as it prepares the surface for subsequent painting. Apply the composition with a roller or spray gun.
• After drying, polishing is carried out and dust is removed.

• The second layer of paint is applied to the door leaf, it is considered the finish.
• After a few days, when the paint is completely dry, apply varnish.

The stain coating is somewhat different. Before applying the composition, the door leaf is moistened. This technique will allow the stain to be evenly distributed. Further, the sequence is the same, only the number of layers depends on the desired shade of wenge color.

Conclusion

Painting a wooden door in a fashionable wenge color is no more difficult than in any other. At the same time, it is important to follow the technology for applying the coloring composition and the conditions for its creation. All sanding and painting work is best done outside.

Our catalog offers more than 90 types of paints and varnishes used on wood. LKM are intended for receiving a strong, transparent protective film. They differ in purpose, characteristics, form of release, consistency (ready-made or diluted), degree of gloss, color tone, price.

Product Features

Our store offers a wide range of universal and special varnishes (for parquet, walls, ceilings, furniture, stone, yachts, baths, saunas). Products are made on a water basis and organic solvents. Features and benefits of products:

• . Good adhesion to the base material.
• . Strength, wear resistance, moisture resistance, durability of the varnish film.
• . Aesthetic appearance of the painted surface.

Order goods and use the "" service provided by OBI hypermarkets.

Payment and delivery methods

1. Purchase goods online with delivery

• . You can pay for the order in cash or by bank transfer.
• . You will coordinate the date and time of delivery with the operator by phone when confirming the order.
• . The terms of the free service depend on the city, amount and weight of the product.
• . Unloading goods, lifting and transferring are additional services and may be paid separately, check with the store operator.

Detailed information about the intervals and zones by city, the conditions for unloading and lifting the order are located, where you can independently calculate the cost of your delivery in advance, indicating the postal address and parameters for unloading.

1. Order and collect yourself where it is convenient for you

• . When filling out the order form, indicate a convenient date and time for you to visit the hypermarket.
• . You can pay for the purchase in cash or by bank transfer at the cash desks of the store.

Purchased goods can be picked up at any of the OBI stores in Moscow, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.

Any wooden surface needs protection. Constant exposure to moisture and other negative factors causes swelling of the fibers, deformation of the product, development of rot and fungi. Acrylic varnish for wood from TM VGT is designed for deep impregnation and protection of wooden surfaces (except floors) from decay.

It is also used for decorative finishing and protection of brick, concrete and other mineral bases, as well as natural and artificial stone from fungi, algae, mold. The varnish can be used for exterior and interior woodwork in all types of buildings and structures (A-B), including for which a wet disinfection regime is provided.

The main advantages of varnish for wood

• Forms a transparent, elastic, strong film. The varnish is resistant to cracking even with small deformations of the base.
• It has a greater depth of penetration into the structure of the tree, which provides longer protection against decay.
• It is universal for outdoor and indoor use.
• It preserves the saturation of the color of the decorative coating or the wood itself. The composition is made with a UV filter.
• Produced in a wide range of colors. Varnishes for wood are offered in 12 colors.
• It perfectly passes steam, not allowing moisture to linger in the fibers. A "breathable" coating is formed, which helps to maintain a comfortable microclimate in the premises.

The application of tinted impregnating varnish for exterior and interior works gives the maximum decorative and protective effect.