How to decorate a room with uneven corners. Finishing the walls and corners of the house outside. Protect corners from damage
The correct geometry of space can visually increase the volume and height of the room. Protruding corners, suspended ceiling structures, slopes and doors - vertical and horizontal joints of surfaces, maintain the proportions of the room.
Plastic wallpaper corners are glued on top for decoration, zoning and surface protection. Perforated products form and reinforce the junction line of planes before finishing putty.
Arched (with different sizes of shelves) products are used to frame curved surfaces.
There are advanced modifications of PVC corners:
- flexible self-adhesive, repeating any given joint configuration (internal and external corners, arched surfaces)
- docking structures for corners formed by PVC panels, slopes
- combined with tape to facilitate the adhesion process when puttying
Creating a clear line is not the only purpose of the corners. Aesthetics is combined with decorating cracks, irregularities, chips and giving strength to the joint. Plastic will ensure safety under mechanical stress, will keep the protruding surface clean.
Advantages of PVC corners:
- create a neat appearance of joints, decorate complex curved surfaces, arches
- have resistance to abrasion, not under the influence of unforeseen mechanical loads
- not subject to corrosion
- the laminated film of the outer coating is inert to aggressive chemicals and gases
- easy maintenance, do not require additional operating costs (painting)
- low price compared to analogues made of metal or polyurethane
- service life is unlimited
- expanded range of colors
- resistant to moisture (can be used for finishing corners in kitchens, sanitary and bathrooms)
- the possibility of using products in unheated premises of seasonal residence (suburban, cottages)
- do not burn
- have color stability, do not fade in the sun
- change shape under the influence of a jet of hot air (building hair dryer) or hot water
Decorative moldings
Cast overlays are distinguished by the type of finish: for internal or external corners.
Products are produced with shelves of the same or different widths.
On protruding corners, in places of constant movement (hallways, kitchens, bathrooms), plastic wallpaper corners with large sides (5 cm) are used.
Arches and curved surfaces with the help of corners, with different sides of the shelves. Different side sizes allow you to maintain the required mounting position of the element on the surface.
The length of the finished product ranges from 2.7 to 3 meters. Plastic is cut to the desired size with a hacksaw, curly construction scissors or a knife. Profile cuts, for making connections along the perimeter of the slopes of doors and windows, are made using a miter box.
To fix the corners, use:
- liquid Nails
- self-tapping screws
- small (bead) nails without caps
- acrylic sealant
- colorless silicone sealant
It is important to remember: compounds that are designed for metal and glass destroy the structure of plastic! Before buying glue, you need to read the instructions, and pay attention to the scope indicated by the manufacturer.
Glue is applied with a gun. A continuous, wavy strip is applied closer to the center of the shelves. The location of the strip will help to avoid squeezing out the glue on the wallpaper when landing in place. Excess composition is carefully removed from the surface of the walls with a damp cloth.
Glue the corners carefully. Removing and re-gluing plastic leads to deterioration.
Installed corners are fixed in place with construction tape to ensure adhesion to the surface. The adhesive tape supports the plastic during the day, then it is carefully removed.
The finished overlay will hide the unevenness of the joint, protect the surface from mechanical influences, and give the room a neat, well-groomed look.
Reinforcing and decorating corners
Plastic corners for putty wallpaper reinforce and level the joints of drywall sheets. Corners designed in this way are treated with a finishing layer of putty and polished. The formed joint is painted, plastered with decorative compositions, ennobled with stone, tile or pasted over.
Sharp or turned corners require the use of corners with a universal turn of the shelves around the axis.
Arched products are designed for bending.
Cut out segments allow you to give a smooth shape that follows the given line of the opening.
Aligning the angle formed by two sheets of drywall begins with an assessment of evenness.
A level is applied to each side of the slope and littered is marked. If the joint has significant deviations, then a starting layer of putty is applied to the recesses and recesses like beacons.
The perforated corner is applied to the installation site and slightly pressed into the applied solution. Excess solution is removed with a spatula. The verticality (horizontality) of the installation of the corner is checked by a level. Correct the position of the plastic with gentle pressure.
After setting the mortar and fixing the perforated corner, proceed to the finishing putty. Finish work on the formation of corners by grinding the surface.
In the process, they try to give the joint a smoothed shape, which greatly simplifies further finishing work.
Perforated corners give strength to protruding corners, making it easier to clean lines, curves and arches.
Color of decorative PVC corners
The color of finishing materials for the structural elements of the room should be combined with the color scheme and style of the space. Tone and texture help unify the composition of the interior. A smooth transition of color does not break up the space, and a contrasting color indicates a visual division into zones according to purpose.
The slopes of the doors are framed with corners to match the filling of the doorway. Plastic corner for wallpaper (colored) can repeat the color of the wallpaper, the texture of the flooring or ceiling plinth. Corners for framing window slopes are selected taking into account the color of the double-glazed window.
The advantage of plastic corners is that the laminated film has the ability to reproduce various colors and textures (wood, metal, fabric).
Additional possibilities of using plastic corners for wallpaper:
- protection of mounting foam along the perimeter of window and door openings from the side of the street
- use in the manufacture of furniture (built-in, including)
- finishing the corners of the kitchen apron made of ceramic tiles
- installation in places of internal and external connections, when sheathed with plastic panels
- drapery of joints, when sheathing external walls with siding
Lightweight, durable plastic corners are indispensable for works that complete the decoration of the room. The color palette presented by the manufacturer of plastic corners allows you to choose the desired tone of products. Laid on molding decorates, zones, protects, increases the service life of joints without additional effort.
The built-in design, with additional fastening properties (adhesive base and sickle tape), facilitates the task of decorating slopes, complex angles, and arches. Experienced and novice builders willingly use plastic corners, improving quality and reducing the time of labor-intensive work.
How to glue the corner is shown in the video:
Rational use of space plays a big role, especially when it comes to a small apartment. No one thinks about it, but in the corners there is unexpectedly a lot of space that can be decorated or arranged in such a way that it brings benefits. Tables, cabinets, corner furniture, shelves of unusual shapes will help you get the most out of even the most nondescript corner.
How to arrange a corner in the bedroom
In the corner there is a place for a large floor mirror. By the way, mirrors optically increase the space, and thanks to skillful lighting, this effect can become even more pronounced. Hang clothes hooks next to the mirror - the most necessary accessories will always be at hand.
How to arrange a corner in the living room: relaxation zone
Kitchen corner saves space in the kitchen
Corner furniture is a classic option for optimal space in a small room. The kitchen corner will free up such the right place in a small kitchen or living room.
Corner in the apartment for a hanging chair
A boring empty corner can be turned into a stylish and family-favorite place to relax by hanging a chair there. Choose the design, size and material of the hanging chair that will suit your tastes and the decor of the entire apartment. Put a couple of soft pillows and a blanket in the chair for extra comfort.
Reading nook can be organized very simply
A cozy reading nook does not require much: just soft floor cushions by a bright window - and you're done!
Corner shelves provide additional storage space
Corner shelves will be perhaps the best solution for decorating the corner of the apartment. Even corner cabinets will be given a head start: without taking up much space, they look more airy, and at the same time will cost you much less.
Shelves with an unusual design will be a great addition to a modern apartment
The market today offers a huge variety of corner shelves, although some models, of course, can be expensive and not suitable for you. But having shown a little ingenuity, you can independently make an interesting and convenient shelf.
Original do-it-yourself shelf for decorating the corner of an apartment
Anyone can build a shelf with their own hands. We need materials and tools that are in any home. Do not dare to cut a tree yourself? In hardware stores, this is done for a moderate fee. For example, this shelf is made from an old door.
Old stairs can decorate the corner of the apartment in an unusual way.
Original idea: an old unnecessary staircase can be a great decoration for a corner in an apartment. Ladders are multifunctional, they can serve as both a shelf and a holder for kitchen towels. An old staircase will decorate the corner, so that it will no longer look empty and boring.
The corner is a great place for keys, notes and all sorts of little things.
You can make a small corner shelf with your own hands. Store on it all those little things that you often use: everything you need will be at hand.
The whole office fits in the corner of the apartment
Books, papers and a workplace fit in one small corner of the apartment. Such a practical piece of furniture, as in the photo, will provide a lot of storage space. All things are in their places, and at the same time the room seems very spacious.
The empty space under the window can be filled with an elegant shelving
Don't like the idea of a reading nook? Place a small shelving under the window. It can not only store books and boxes, but also beautifully decorate.
An empty corner attracts the eye if it is beautifully decorated.
Use the corner of your bedroom to give the room an irresistible vibe. Hang a mirror on the wall, place a side table next to it, decorating it with candles, flowers and other decorative elements.
Corner sideboard for storing dishes
Extra storage space in the kitchen is always useful, and the space next to the window is often not used. Why not place a corner cabinet here? A piece of furniture will attract all eyes if painted in a bright color.
In the corner you can build a huge spacious wardrobe
For spacious bedrooms, this idea is also suitable: the corner can be turned into a whole dressing room. You can divide the space with a bookcase or compartment doors.
Corner fireplace for warmth and comfort on cold days
The fireplace creates a pleasant, cozy atmosphere in the room. Even if it seems that there is no place for a fireplace in the living room, see if you don’t have to give up this great idea, because you have a free corner?
How to arrange a corner in the nursery
An empty corner, a canopy and a few pillows, and the play corner is ready! And the child will decide for himself what toys to decorate his mini-room with.
An empty corner near the fireplace can be filled with firewood
The firewood rack in the photo fits perfectly into the empty corner near the fireplace. A very practical design with which firewood will always be at hand.
A cozy corner is a great place for your pet
Build a soft, comfortable bed for your pet. Being in the corner, the animals feel protected, which is why it is an ideal place for them. You can hang shelves for food, rewards or hooks for a leash and collar on the wall.
Such a wardrobe will allow you to use the space in the corner
Small hallway? Use the right corner furniture! This corner cabinet looks very neat and takes up almost no space.
Nowadays, empty corners are an irrational use of free space. Therefore, in order to prevent the abyss of free meters, it is necessary to properly organize the decor of the corners.
In the process of decorating corners, it is very important to maintain balance in order to use the place not only in terms of practicality, but also to make it a beautiful element of the interior.
floor vases
One option to make a corner of a room beautiful without too much effort is to place a floor vase.
However, in this case, you need to learn certain nuances, so the larger the area of \u200b\u200bthe corner, the more voluminous the vase will be required, if this is not enough, then a couple of smaller vases can be added to it. You should not decorate the corner with a low vase, with the exception of wide round vases.
If a vase has an interesting shape, bright colors or spectacularly painted, then it is not necessary to fill it with something, it is beautiful in itself.
But it is better to fill an inexpressive vase with stylish contents, for example, bamboo, reeds, spruce branches, original twigs, herbarium or artificial flowers, as in the photo of the decor of the corners.
A wicker basket or bulky glassware decorated with pebbles or shells can successfully replace a vase. This unusual design decision will make the corner the highlight of the room.
Racks for potted plants
A beautiful planter with a large and bright flower looks quite advantageous in the corner. Moreover, the more free space, the larger the plant should be.
So, for example, if the decor of the corner in the room may look like this, in the corner there is a beautiful glass or wrought iron rack, on which there are beautiful flower pots with plants, the central place among them will be occupied by a palm tree.
At the same time, it is important to consider that the model of the rack should match the style of the interior of the room. Especially effectively this design will emphasize the rustic style and eco style.
Floor lamps
Traditionally, floor lamps are placed in the corner, but you can make the classics more interesting if you put 2 symmetrical lighting fixtures.
This option is not only outwardly attractive, but also functional, as it additionally illuminates the room, emphasizing the style and placing accents.
Mirrors
The most interesting decor of the wall corner is the use of a mirror, with which you can change the perception of space, expand the room or lengthen it.
Using mirror surfaces as decor, it is not necessary to hang the mirror as a whole, two narrow mirror strips are enough, which are mounted at the junction of both walls.
You can also put a floor mirror in the corner or install a screen with mirrors. In this case, care must be taken to ensure that the mirror structure is well fixed.
The mirror corner can be supplemented with a beautiful floor lamp or spotlights.
Gallery
In the decor of the corners in the apartment, you can include family photos in beautiful frames. A great option to decorate the corner with a three-dimensional picture.
pendants
Quite rarely, such a design technique as ceiling pendants is used in decorating a corner. However, this is one of the most effective ways to decorate a corner space.
To create an original design in the interior of the hallway, a lighting device hanging low from the ceiling with an unusually shaped lampshade allows.
Curly flowers can also be used as a hanging decoration.
Console
Finishing the corners with decor includes not only beautiful objects, but also the functional use of free space, in this case a console can be an ideal option.
The most successful solution can be called the corner model of the console, with its help you can fill the corner with the necessary things, besides, this corner will look great.
table
The corner of the room will look luxurious if you put an elegant, small table in it, and on it a vase of flowers or a framed photograph.
Moreover, such a design decision will not only make the corner beautiful, but also functional, because you can leave your gadget or an unread book on the table.
And if a table with drawers, then this is just a godsend, because all sorts of little things can be stored in the drawers, like a bunch of keys.
Armchair
Turn an ordinary corner into a pleasant place to relax if you put a chair in it. However, this will require a high chair or hang a mirror on the wall above the back so as not to violate the proportions.
Photo options for decorating corners
The outer corners of the walls are the most vulnerable to damage, especially if there are small children or animals. After all, plaster mixtures are not durable and it is enough to slightly touch the corner with a small object to damage it. As a result, if the corner is covered with wallpaper, then dents form, and if it is painted with paint, then notches. Therefore, when repairing an apartment, it is necessary to strengthen the outer corners with special corners.
Corners are plastic PVC (in the photo on the left) and metal. Metal corners are installed during the repair of walls before they are leveled and puttyed, and after the repair is completed, they are not visible from the outside. Plastic corners are installed after pasting the walls with wallpaper or painting. Plastic comes in different colors and you can choose a corner to match the color of the wallpaper or wall color. Plastic corners can be installed at any time, for example, if the outer corner has lost its appearance due to damage or dirt.
With metal corner profile
Protection of external corners with a metal corner profile is preferable, since after the repair of the room, the corner profile is not visible and, most importantly, the problem of aligning the corners and the walls extending from the corner is solved.
The length of a standard corner profile is three meters, so before installing it, you need to measure the length of the corner with a tape measure and cut off the excess part of the profile.
Since the corner profile is made of thin steel, it is well cut with scissors for metal. The sides of the corner are cut towards each other, and the uncut part is easily broken by several folds.
If the corners of the walls are straight (if the walls are lined with gypsum boards), then it is easiest to fix the profile corner with small nails, as shown in the photo. If it is not possible to drive carnations into the corner or it is uneven, then you need to apply a small amount of gypsum, alabaster or rotband on it at a distance of no more than 50 cm from each other, and until the solution has hardened, attach the profile corner to the leveled corner.
In order to securely fix the profile corner on the wall, if there is a gap between its sides and the wall, it is necessary to fill these gaps with a leveling mixture with a spatula before leveling or puttying the walls.
Such a measure will prevent the bending of the corner when leveling the walls and ensure that the corner is securely fastened as a beacon.
After the solution fixing the profile corner hardens, you can proceed to further finishing the adjacent walls. In the photo you see how the corner is hidden by a rotband in the wall surface extending from it.
The use of a profile corner will not only reliably protect the corners from destruction, but also make almost perfectly even outer corners. All six outer corners in the hallway during its repair, I protected and leveled with the help of a corner profile.
With plastic corners
PVC plastic corners are used to protect or decorate painted, wallpapered or decoratively coated exterior walls. But their use is not limited to this. With success, PVC corners can be used for decorative finishing of window and door slopes, panel joints, and in many other cases. Corners are produced in different colors and even transparent. There are widths from 10 mm to 100 mm, lengths of 1.5, 2.3 and 3.0 meters. There are also corners in the form of an arc, specially designed for installation at corners in arches.
Plastic corners are usually fixed with liquid nails, but there are corners with an adhesive layer applied on the inside, protected by anti-adhesion paper.
It should be noted that plastic corners can only be glued to sufficiently even corners, otherwise the gaps formed between the side of the corner and the wall can only worsen the appearance. Therefore, before deciding to protect the corner with a plastic corner, you need to determine if there will be cracks. To do this, attach a long construction ruler or a flat board to the corner. The PVC corner is quite elastic, and if the non-linearity of the wall corner is smooth, then a gap will not appear.
I used a PVC plastic corner for decorative design and protection against destruction of the corners formed by the wall and the slopes of the front door. The corner was chosen with a width of 10 mm in white, since the slopes were painted with white water-based paint, and the walls were the color of coffee with milk. What came out of it can be seen in the photo.
Since the angle formed by the slope of the doors and the wall was not straight, it was difficult to use a ruler to mark the PVC corner. Therefore, the marking was done by applying a corner to the place of the future installation and marking the cut points with a marker.
The thickness of the plastic corner is only 1 mm, therefore, by pressing it against the corner of the repair table, it is easy to cut the corner with a jigsaw. A metal hacksaw will work too. In order for the butt to turn out smooth, after sawing it, you need to walk along it with fine-grained sandpaper fixed on a wooden block.
To fix the corner, it is best to use liquid nails. When buying liquid nails, you need to make sure that they are intended, including for gluing PVC materials. If liquid nails are of high quality, then it is almost impossible to tear them off the corner after drying. I used liquid nails, the packaging of which you see in the photo.
For reliable fixing, it is enough to apply small portions of liquid nails at a distance of 15-20 cm along the entire length of the corner, as in the photo. Next, the corner is applied to the planned place, pressed and held for the time specified in the instructions for a particular brand of liquid nails. Usually the tacking time is a few minutes, and it will take a day to dry completely.
Next, a horizontal corner is marked, cut to size and applied for fitting. If a wedge-shaped gap has turned out between the corners, then with the help of sandpaper fixed on a wooden block, the end face is trimmed to the required size. It is better to make the horizontal corner a millimeter longer than it turned out when trying on. In this case, if you make a mistake, then there will be a possibility of adjustment.
Adjusting the vertical corners of the door slopes is easier, since their lower end is always covered with a floor plinth. Therefore, there is always the possibility for precise adjustment of the contacting ends of the corners.
If high strength is not required, then the outer corners of the walls can be protected with decorative MDF corners covered with a decorative plastic film. With the help of similar material, doors and the facade of the kitchen are now being made. The corners are easy to machine and allow the protection of external corners from 90° to 180°. The range of corners made of MDF is represented by a large selection of colors and patterns, which allows you to match them to the color of the wallpaper or wall color scheme. Protected by such a corner, the outer corners have a beautiful appearance. You can fix them at the corners with any liquid nails. I used this type of corners for decorative framing of a large mirror mounted directly on the wall.
Today, decorative corners on the corners of the walls are an important element of decor. They help protect problem areas from mechanical damage. Their installation prevents damage to expensive finishes, gives the interior frame a finished look. Let's talk about where such elements can be used, what materials they are made of, how they are attached to the surface.
Scope of use
Corners are the most problematic place. When performing repairs, it is difficult to decorate them beautifully. Wallpaper pasted on them, after some time, lift up and peel off. When furniture is brought into rooms or when rearranged, solid large elements are often damaged, which leads to a sloppy appearance. All this can be prevented by purchasing decorative wall corners and installing them at the stage of finishing. They will completely close the ends with themselves, allow you to form a smooth transition from one material to another, cover up some of the sins of the painter's poor-quality work.
Decorative corners - an element of decor that gives the finish a complete look Source design-homes.ru
In addition to a purely technical function, the corners carry an aesthetic load. If you close the perimeter of the window opening with a white profile, the window will look better. This technique is often used when, according to design requirements, the window is not covered with curtains, but is framed with blinds. In this case, the color of the corner should match the color of the wall finish. When a contrast technique is applied, the profile acts as a separate element of decor. It immediately catches the eye and becomes an original part of the interior.
Designers love to use decorative corners for the outer frame of the doorway. This becomes especially relevant when the thickness of the wall is greater than the width of the door frame. This difference is completely closed by extensions, and then corner elements are superimposed on top of them, the color of which completely matches the color of the door.
The outer corners of the walls, arched openings, ledges and niches need additional protection. Installing corners will prevent the risk of damage from accidental impact. It is relevant when the walls are simply plastered or covered with wallpaper. In addition, it is easier to do cleaning and eliminate traces of hands. If the corners are closed with a plastic profile, it will be easier to keep clean.
Corners can close the ends of the wall, finished with ceramic tiles or wall panels. Often in such materials, the edges remain unpolished, so the edge looks unattractive. Mounting the profile helps to completely hide such a defect.
Another area of application is the decoration of the outer corners of structures assembled using drywall. Today, the technology of creating open shelves, racks from this material is actively used. Joints closed with a profile look more aesthetically pleasing.
Arch, the corners of which are closed with a decorative corner
With the help of decorative corners, you can make a frame for large mirrors, close skirting boards with them, any joints that take the form of an angle. There are profiles for plastering, models for ceramic tiles, profile products for bathtubs, furniture.
Varieties of corners
The appearance of products and their technical characteristics depend on the material from which the profiles are made. It also defines the scope.
metal
For the manufacture of such corners, aluminum, brass or steel is used. Corners made of brass and steel have a smooth, well-polished surface. The aluminum profile is presented in three varieties. There are polished samples, anodized products, corners with a decorative coating on sale.
Most often, such products are used in the furniture industry, but designers also like to use them when the walls are decorated with furniture panels, MDF or chipboard sheets. In this case, a metal profile is selected, painted to match the base material. Unpainted metal corners are suitable for framing mirrors, paintings or posters placed under glass.
Craftsmen use metal corners to create the basis for the installation of light armstrong suspended ceiling structures. With the help of them it is possible to carry out the installation of light plastic panels. They can act as anti-slip pads or protect the edge of the structure from chips and cracks.
Finishing wooden
Their main area of use is the decoration of external or internal ends of walls sheathed with a block house, planken or clapboard. They are made from expensive or cheap types of wood, so they have a different price. They can be additionally painted and varnished, various patterns can be created on the surface using a milling machine.
Recently, designers like to use a technique that allows you to cover the ends of the wall, pasted over with wallpaper or painted with paint. This is only permissible if there are strictly straight surfaces.
Source avatars.mds.yandex.netWhen choosing this finishing option, it is important to consider that a wooden corner is a fragile product, with the slightest effort it can break or crack. Excessive moisture or prolonged overheating can spoil its attractive appearance. Therefore, they should not finish the walls and window openings in the bathroom or in the bath.
Wooden corners - a fragile product
Wooden elements are fastened with wood glue or PVA glue. Liquid nails are suitable for the indicated purposes. If the walls are not concrete, you can also fix wooden corners with finishing nails. In this case, the gap between the edge of the profile and the head of the nail must be at least 10 times the diameter of the fastener.
Silicone transparent corners
Such products are ideal for framing corners covered with wallpaper. They are very soft to the touch. If they close the corners in the children's room, the children will be less injured. The silicone profile has only one drawback: its transparent texture is unable to close the finish defects from prying eyes. This must be taken into account when choosing and purchasing products of such a plan.
Silicone profile is an excellent tool to ensure the safety of children Source d.allegroimg.com
On our website you can find contacts of construction companies that. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".
Polyurethane
With the advent of polymeric materials, the possibilities for decorating residential premises have expanded markedly. On sale there are corners with smooth surfaces, with a complex relief that skillfully imitates the texture of gypsum stucco. In contrast to the plastic profile, the thickness of the shelf is greater. This complicates the installation process, but the appearance of the finish benefits from this. The polyurethane corner creates effect of solidity. In addition, it can be additionally painted with paints used in decoration, but there is no plastic profile.
In the manufacture of products, pressing technology is used. It allows you to create decorative profiles of various shapes. They are not afraid of moisture, temperature changes, serve for a long time.
Manufacturers offer universal white polyurethane corners, they are best suited for painting. There are profiles, the texture of which skillfully imitates wood. Products look beautiful, in which the smooth part is painted, and the upper ornament is decorated in gold. Such corners are ideal for classic interiors. They are attached to a special adhesive composition. For these purposes, you can also use liquid nails.
Colored plastic
Such products have a smooth, even surface. They are made from polyvinyl chloride. Manufacturers produce collections in which products of thirty shades are presented. There are profiles among them that imitate the surface of wood, metal. Their scope is not limited by physical parameters, so the plastic profile is used quite widely. For the design of arches, flexible corners and arched products are produced.
A plastic profile is mounted on a plastered wall simply:
- Glue is applied to the surface of the inner part of the profile with a dotted line at a distance of 30 cm.
- The profile is then applied to the surface of the arch or straight end.
- From above, the corner is fixed with molar tape.
In order to glue plastic to the surface of the wallpaper, it is important to make sure that the canvas “sits” firmly on the surface of the walls, that the glue under them has dried well and provides a reliable adhesion. Otherwise, under the weight of the ceiling, the wallpaper will fall off and hang. It is better to glue the corners a few days after wallpapering.
Video description
The video shows how to glue plastic decorative corners:
MDF
This material is also used for the manufacture of a decorative profile. In the process of its creation, two strips of the same size are fastened together with an adhesive film. It is applied from the front. Its color and pattern matches the color and pattern of MDF. Such products can be used both for decorating external corners, and for framing internal ones. The degree of the angle is not important.
Note! Corners made of MDF are undesirable to use in the interiors of rooms with high humidity.
In this way, the corners of the walls sheathed with MDF panels are formed. Source www.meister.com
Choosing a Corner Design
In order for the decoration of the room to be in harmony with its content, it is important to take into account various factors when choosing a profile. It is important to pay attention:
- on surface materials. If the walls are lined with clapboard, the ends covered with a white plastic profile will look ridiculous.
- On the color of the finish. A red profile will spoil the overall impression if the room is made in pastel colors.
- For styling. The metal profile is not well suited for interiors in a classic style, but it is able to emphasize the high-tech concept.
- On the function of the room. A plastic profile is ideal for kitchens and baths; silicone corners are better for children's rooms. Wooden with chamfers will be appropriate for the design of cabinets.
If the choice falls on wooden corners, designers are advised to match the colors and textures of doors or floor finishes. Then it will look organic. If you want to save money, you can buy wood-like plastic corners.
When creating laconic interiors with a minimalist style, the choice of metal corners becomes justified. They look good in hi-tech, in a loft. The width of the shelf must be chosen such that it completely covers the end of the corner. You need to pay attention to this if the walls are covered with panels, drywall, if additional insulation and soundproofing are performed. For such structures, the edges always turn out to be uneven, the decorative corner covers all defects well.
Typically, the angle between the slope and the wall is greater than 90 degrees. In order for the selected profile to be able to lie well on it, it must be slightly bent. You can do this with both metal and plastic corners. To do this, experts advise putting the product on a flat surface with one edge, and then press lightly from above with your hands and push it along the entire length of the corner with a brush. In the cold season, such a procedure should be done after the product has been in the room for a day and the room temperature has been taken.
Video description
The video tells how a metal corner profile is installed on a ceramic tile:
Briefly about the main
Decorative corners help to solve many problems. They improve the aesthetics of the finish, protect the ends of the walls and their inner corners from mechanical damage. The products are inexpensive, they are very easy to install, so if necessary, you can experiment and try to improve the design of an already finished interior.