Ceramic and plastic plinth for tiles from the point of view of a personnel officer - we study the personal file of each element. Plinth made of ceramic tiles. Interesting solutions, competent approach The height of the plinth made of ceramic tiles

Previously, tiles were used to decorate walls in rooms where you constantly have to deal with water - a bath, a toilet, a kitchen. Today, designers offer to finish with ceramic tiles not only walls, but also floors in rooms with high traffic:

• halls
• hallways
• stairs.

Traditionally, the corner between the wall and the floor was always closed with a plinth - wooden or plastic, which did not always go well with ceramics, although it protected the joints during wet cleaning. Not so long ago, the designer collections of well-known manufacturers were replenished with a ceramic plinth for the floor, which constituted a worthy alternative to traditional finishing materials. It not only blends harmoniously with the flooring, but also effectively emphasizes the transition between the wall and floor finishes. In addition, ceramics has a lot of advantages in comparison with wood or plastic:

• it has a stable structure and fairly high strength,
• does not deform at high humidity,
• hygienic
• eco-friendly,
• resistant to cleaning agents, temperature changes,
• prevents the formation of mold and fungi.

Ceramic plinth for the floor: what does it look like and what does it give?

Previously, in order to get finishing strips to mask the joints between the floor and the wall, at the corners, a master tiler had to cut tiles and manually grind the cuts, which did not guarantee special beauty and made the upper edge dangerous. Today, ceramic manufacturers offer frieze strips of various thicknesses and shapes, with or without a pattern, for each collection.

The standard ceramic plinth has a triangular shape at the base with a concave middle or relief. But no less popular are flat friezes with a narrow base and a soft chamfer along the upper edge. The use of such skirting boards facilitates the process of installing furniture, since it can be moved almost close to the wall.

The height of the products is also different - from narrow at 1.5 cm to wide at 8-10 cm, however, taking into account the height of the tiles in a particular collection. The surface can be plain, patterned or textured, with either a matte or glossy finish.

The plinth is selected not only to finish the joint between the floor and the wall, but also to close the gap between the wall and the bathroom (sink), since we traditionally put plumbing equipment close to the wall to save space.

Modern collections of wall and floor tiles are so diverse that it is hardly appropriate to talk about trends. Designers boldly suggest choosing skirting boards that contrast against the background of the walls, as this emphasizes the geometry of the space, and when combined with the tone of the flooring, it gives the room the effect of completeness. By choosing a ceramic plinth for the floor in the color of the walls, you can visually increase the height of the ceiling, make the room lighter and more airy. A special attitude to the pure white skirting board, which harmoniously combines with any color, but at the same time, serves as a clear accent, clearly separating the wall and the floor, introducing a touch of rigor and classics.

The weight of the product is minimal, which allows you to mount it on ordinary tile adhesive

Advice! Master tilers advise buying a ceramic floor skirting board with a margin of at least 6-10%. This is done so that there is always a reserve in case of a fight during laying, and a reserve for repairs, because it is no secret that in a couple of years there may not be suitable skirting boards in the store.

Rules for the selection of skirting boards

Of course, one of the most important parameters when choosing a ceramic plinth is color and texture. The product must be in harmony with the tile. No less important is the thickness of the plinth, which in no case should be less than the thickness of the tile. It is optimal to choose the length of the skirting board that matches the dimensions of the tile so that there are no inconsistencies in the seams. If the tile has an end of 25 cm, then the length of the plinth cannot be less. Most manufacturers prefer to produce skirting boards the same length as the tiles, but some offer borders 1.5-2 times the length of the tiles so that there are as few seams as possible in the skirting board.

When calculating the required number of skirting boards, remember to consider how many corners (internal and external) you will need to cover. To facilitate the laying process, many manufacturers have begun to produce additional decorative elements - corners. They are not provided in every collection, so check with the seller about their availability. The corners also have a different shape, but thanks to their presence, you do not have to cut the tiles.

Placement and installation of ceramic skirting boards

Installing ceramic plinth is not much different from laying tiles. The consumption of the adhesive mixture will be the same, and the layer thickness too. However, there are nuances in the layout. If the plinth is of the same width as the tile, then the seams must match, if the plinth is larger in size, then it is laid in proportion to the tile seams.

Necessary tools for mounting the skirting board:

• spatula with teeth (for applying glue);
• mallet (rubber mallet);
• construction knife;
• level;
• "crosses" for stitching seams.

Of the materials - a plinth and the required number of corners and an adhesive mixture (approximate consumption with a layer of 3-4 mm is about 5.2 kg / m2).

Installation procedure: with a spatula, apply the mixture to the back of the plinth and apply it to the floor, press it against the wall and gently beat it with a mallet so that it fits snugly into place. To maintain the same thickness of the seams, "crosses" are used. The verticality of the plinth installation is checked by a plumb line. Having reached the corner, install the connecting element. If it is necessary to cut the plinth, it is better to use a tile cutter, in extreme cases, a grinder. The cut is cleaned with an emery stone or sanding paper with a large abrasive.

When making external corners without decorative elements, you should make a 45-degree cut to the inside of the plinth. There are several ways to do this: using an electric tile cutter or grinder. In this case, you need to try not to touch the coating of the front side.

Grouting is done after the glue has set. It is desirable to use compounds with antiseptic and antifungal properties.

Then the question may arise, which skirting board to use in order to beautifully and concisely combine the floors with the materials that are used on the walls. The best framing option for any type of flooring is a skirting board, which is able to hide the gap between the tile and the wall, unevenness if the tile is cut, uneven edges of the wallpaper or wallboard, etc. But what is the best skirting board to use when on the floor?

The best option would be styling. What is this material, how to choose it, what is its peculiarity and how to use it? We will try to give you answers to all these questions so that you can easily choose it for your repair.

Manufacturing

A ceramic skirting board goes through the same stages during production as a regular tile. The clay-based mixture is poured into special molds and then pressed. After glazed options are covered with glaze and baked at a high temperature. Thus, a ceramic plinth of the required shape with high strength indicators is obtained.

To simplify the process of finding and selecting skirting boards and floor tiles for customers, manufacturers produce series consisting of both types. Thus, the client simply needs to order the required amount of skirting board from the same company. The length of the tiles for the floor and the plinth most often match, so that you can easily lay a ceramic baguette on the wall, while the seams match those that are already on the floor. Some manufacturers represent and, which can be one and a half or two times longer than the tiles on the floor. In this way, the number of seams can be significantly reduced, which will ensure the integrity of the line.

Some builders, as an alternative to the finished baseboard, suggest simply pasting the wall with thin strips of cut floor tiles. But this option has a number of disadvantages:

• jagged edges
• danger of cutting yourself on sharp edges
• fragility
• cutting time

Cheapness is considered the main argument for using cutting instead of plinth, but it is still worth realistically assessing the cost of cutting and the chances of spoiling the strips and the cost of a professionally prepared product already in advance.

Advantages of ceramic skirting boards

When choosing a material for connecting the floor and walls, you can choose different skirting boards made of plastic, metal, laminated, etc. But for combining tiles with walls, ceramic skirting is the most suitable option:

• it is not afraid of moisture, so it is well suited for kitchens, bathrooms, showers and toilets, where such tiles are used
• it will not start mold and fungus
• ceramics are easy to care for, dirt does not stick to it, stains, etc., can be easily removed from its surface.
• it does not deform due to exposure to moisture and temperatures
• This material is strong and durable enough.
• visually blends well with wall and floor surfaces

This range of advantages makes ceramic planks so popular and unique in terms of wall and floor combinations. But there is one significant drawback that requires attention - this is the fragility to mechanical shocks and falls of the material, so you should be extremely careful and attentive in the process of transporting and laying it. But during operation, if the laying was done efficiently and reliably, you will not feel these nuances, and the plinth will not be inferior in strength to the floor covering itself.

How to choose a plinth?

If the manufacturer does not provide skirting options for your flooring, but you still decide to opt for just such an option, then this is not a problem at all. The current trend in the use of ceramic skirting boards shows that if you choose it not to match the tone and texture of the flooring, but to match the walls, or in contrast with them, you get very original design solutions. Therefore, you can afford to experiment and choose non-standard tandems of floor and skirting boards or planks and walls.

If you still decide to choose a plinth for your tile, then follow the rule in choosing: the maximum allowable difference in colors is only one tone. Even if it seems to you that the colors are very similar, then still try to attach them one to the other and evaluate the difference so that after the repair work is completed you will not be upset by a bad combination.

As for the height of such a plinth, it is worth choosing it individually, depending on the size of the room, the length of the walls, the color of the floor, etc.

Where is ceramic plinth used?

This skirting board is well suited for the following rooms:

• steps
• commercial premises

In the kitchen, where there is a high possibility of water or food getting on the floor and walls, it is necessary that the baseboard is also not afraid of such an impact. The bathroom and toilet are places where high humidity, steam or the risk of fungus is unavoidable. Therefore, all materials, including the plinth, should not absorb moisture and odors, be hermetically connected to other surfaces, and be easy to clean.

Stair skirting is a good way to protect the walls from footprints and create a beautiful rim over the steps. For such a finish, manufacturers produce special options in the form of flat corners that frame the steps.

Commercial premises and corridors are most often public places where people can be, carts and large loads of goods move, etc. In general, not every material is able to adequately cope with possible mechanical stresses, but ceramic plinth is highly durable and hard. In addition, unlike many other planks, it does not have a hollow space inside, so it does not deform upon impact or friction.

plinth laying

The principle of laying the skirting board is quite simple, especially if you have already dealt with ceramic flooring on your own.

Before laying, the surface is leveled, primed if necessary, and then a special one is applied. The same materials are used as for tiles:

• dispersive
• epoxy adhesives

If there is high humidity in the room where you will install the tiles or the risk of getting it, then use moisture-resistant adhesive mixtures.

It is necessary to lay the skirting board in the same way on the wall, using a level and observing the same distances between the elements. To do this, you need to use special spacers in the form of crosses.

Most often, the plinth in the section has a triangular shape in order to more tightly close the gaps between the wall and the floor and have a smooth transition. But manufacturers also offer flatter baseboards with a rounded top of the same width. Such types are suitable if you need to press furniture or appliances tightly against the wall, or if the wide ledge of the plinth prevents the door from closing.

After laying, it is necessary to wipe the seams. It is also recommended to use here, similar to the main ones that you have chosen for the floor. Choose the color of the grout depending on what color your planks are. In order not to stain the walls, use masking tape, and try to remove the remnants of glue and grout on the floor immediately.

In order to beautifully decorate the protrusions on the walls, manufacturers offer, but sometimes such products are not in stock, then you will have to cut the baseboard yourself at an angle of 45 degrees to make neat joints at the corners.

We told you about the features of this type of plinth, like ceramic. We hope that the information has become useful to you and you can easily make a choice in favor of high-quality and suitable material for you.

This type of combination of floor and walls is stylish and original, so in any repair it will be able to emphasize the elegance and uniqueness of the interior.

• Equipment RUB 1,742 per m2 Gracia Ceramica 786 rub. per m2 Gracia Ceramica 861 rub. per m2 Grasaro 875 rub. per m2 Monopole RUB 2,217 per m2
• Porcelanosa 4 762 rub. per m2 Coliseum Gres 950 rub. per m2 Lb-Ceramics 797 rub. per m2 Keramin 743 rub. per m2 Italon RUB 1,030 per m2
• Cersanit 689 rub. per m2 Atlas Concorde Russia 1 370 rub. per m2 Atlas Concorde 2 782 rub. per m2 Kerama Marazzi 792 rub. per m2 Italon 2 325 rub. per m2

To give the ceramic cladding more elegance, completeness of the image, a plinth is used for tiles, which allows you to mask the joint between the floor and wall parts of the cladding. Previously, it was not possible to purchase a plinth specially for tiles, and therefore the tilers themselves made it using a tile cutter. But the quality of such products could not be considered satisfactory.

Today, the situation has changed dramatically - plinth ceramics are now represented in the assortment of brands that are engaged in the production of products for cladding.

What is this article about

Product varieties

The floor plinth serves as an interface between the vertical plane of the wall and the horizontal of the floor surface. In the facing of the joints of the eaves and edging, shaped inserts are used.

There are several types of products of this type:

• shaped tiles;
• elements "with blockage" - to close the joints on the end faces;
• rectangular tile with littered ends (designed to match the pattern);
• elements of a cornice with a figured profile (glazed and with a break on the outside).

Please note: when purchasing cladding elements, you need to check that they belong to the same batch, since manufacturers regulate technical deviations in the length of the edges only up to 1.5 mm. In one batch, such a fluctuation is allowed in any direction, which makes the cladding of better quality.

Characteristics of finished products

A number of requirements are imposed on the floor plinth. In particular, these are:

1. The presence of the correct geometry, without visible bulges or dents;
2. The surface must be solid, not cracked;
3. The difference in thickness between separate parts cannot exceed 0.5 mm;
4. For floor cladding, the plinth of the first two grades may have edge irregularities of no more than 1.5 mm, and elements of the 3rd grade - no more than 2 mm. To do this, measurements of curvature are made when the part is located on a flat base;
5. The value of water absorption is the ratio of the weight of the product in dry form and when laid on the base.

Ceramic plinth is endowed with several important functions in terms of aesthetics and practicality. In particular, its advantages are:

1. The protective properties are explained by the reliability of adhesion to the base due to the use of an adhesive joint, which excludes the occurrence of cavities. Competent installation and an effective reveal provide complete protection of corner joints from the penetration of dirt and moisture. In this connection, such unpleasant moments as the appearance of the smell of dampness and decaying organic matter are excluded. In addition, a reliable barrier will be created against the development of a colony of harmful insects, fungi and mold;
2. Strength characteristics. With any change in temperature, the material retains its integrity without being subjected to linear deformation. Its fire safety and increased thermal conductivity allow it to be used when installing a floor heating system;
3. Compliance with environmental regulations. The composition of the elements is burnt clay, without the inclusion of hazardous substances. For this reason, their toxicity, causing allergic reactions are excluded;
4. Ease of handling and operation. Wet cleaning is all that is required to maintain the neat appearance of this kind of cladding. Its resistance to chemicals allows the use of various household detergents for cleaning surfaces. The ceramic border is not subject to fading and does not imply regular cosmetic renewal (staining, varnishing);
5. Unique design. A wide range of colors, shapes and dimensions allows you to experiment with interior design. By means of such plinth elements, a single ensemble of decoration is created.

In fairness, it is worth pointing out the shortcomings.

1. Ceramic elements are relatively fragile, which is typical for all tiled coatings. For this reason, it is not recommended to cause strong mechanical damage to the plinth installed in the housing;
2. The static form obliges to carry out facing only in a rectilinear direction. For curved and rounded complex configurations, this material is not suitable.

1. Today ceramic skirting boards are offered together with flooring collections, being their design addition. The length can be equal to the size of the tile or it can be a multiple of one and a half, two or three times. Manufacturers do not consider it expedient to produce elements of longer length, since the installation of large-sized panels inevitably entails a number of difficulties;
2. When choosing a product independent of the collection, special attention should be paid to its size. A mismatch in dimensions will affect the accuracy of joining tiles and edging. And this will not affect the design of the walls and floor in the most trustworthy way;
3. When choosing products, you should find out the presence of additional components: corners for joints outside and inside, transitions and complex details necessary to create a complete room decor. Only an experienced specialist can undertake independent cutting of corner mates. The presence of ready-made additional elements will significantly speed up the installation process, moreover, their presence affects its result;
4. When choosing products with regards to design, everyone has their own vision of interior design. Here it is worth paying attention to the fact that the plinth can be both in a monophonic design and with a pattern. It can be the owner of a smooth or embossed, matte or shiny front surface. However, products with a smooth surface are much easier to care for;
5. When calculating the right amount of material, you should add about 10% to the stock. The presence of excess material will help not to suspend the repair process in case of damage to some parts, or it can act as a spare repair kit for future replacement. After all, it is unlikely that it will be possible to meet an identical copy of this product on sale in years to come.

Tile edging device

Installing a tile baseboard is not difficult. At the same time, advance preparation of everything is necessary to eliminate any excesses during the installation process. What is being prepared:

• plinth in a set with additional elements;
• small notched trowel;
• adhesive mixture, sealant, fugue;
• large-format sandpaper;
• cutting devices;
• clean rag;
• mallet;
• level.

Mounting

Before starting installation, they are determined with the laying scheme. All elements are laid dry. So the placement of the joints, the ratio of the seams, the need to trim some parts immediately becomes noticeable.

Details are adjusted to the required size using a tile cutter. But to process the edging with an intricate relief, they take a grinder with a diamond disc. But even in this situation, extreme care is taken so as not to damage the decorative layer and not leave chips on the ornament protruding outward. Inconspicuous saw cut defects are leveled by processing with sandpaper. In the absence of corners, the inner edge of the plinth is cut at an angle of 45 degrees. The fitting of the edging panels is carried out until the glue is mixed. In some cases, the vertical joints in the room are characterized by excessive curvature, and therefore bringing to the ideal joints can take a significant part of the time.

Sequencing

First of all, the corners are thoroughly cleaned of dirt, dried. The highest degree of cleanliness of the glued surface ensures high adhesion and strong bonding of materials.

The walls are glued around the perimeter with masking tape to the height of the mounted edging. This measure will protect the wallpaper from contamination by protruding glue during installation. Tiles, plastic panels do not need to be protected in this way.

Installation is carried out from a well-visible angle, gradually moving towards the middle of the room. Then they move towards the unfinished area. With this method, the accuracy of the seams is achieved, which should be especially checked in rooms with layout difficulties.

An adhesive mixture is evenly applied to the end surface of the plinth part (the layer of which is usually equal to 3-4 mm). For small elements, the adhesive is applied with an ordinary spatula, with a frieze of about 150 mm it makes sense to use a spatula with teeth.

Next, the part is applied to the surface and pressed. They try to achieve its most accurate placement vertically and horizontally. To control this indicator, use the level of the builder. The final fixation is performed by gently tapping with a mallet.

On uneven areas of the surface, adjustments are made by adding or removing adhesive mass at certain points.

Immediately remove excess solution with a spatula. A paint knife is used to eliminate excess between the end sides of the plinth.

Even before the adhesive mixture has completely solidified, the floor and wall surfaces, as well as the edging itself, are wiped with a moistened rag.

Please note: individual mixtures are very difficult to remove after drying. At the same time, they can leave noticeable stains on the materials that are almost impossible to remove.

The gaps between the joining parts are maintained by means of adjusting crosses. The value of the width of the seam is provided equal to that which was observed when laying the main sheet. If this condition is not met, the following elements will be stacked randomly.

When the glue dries in a day, they begin to overwrite the seams. As a fugue, a moisture-resistant composition is chosen.

Upon completion of the repair, a general cleaning of the skirting boards from streaks and glue drops is done. The final touch is removing the masking tape from the walls.

It would seem that such an insignificant element of flooring nevertheless plays an important role in interior design, delighting residents with the impression of facing.

Finishing the floor with ceramic tiles in rooms whose walls are covered with alternative decorative materials requires an elegant design of the junction of surfaces around the entire perimeter. Tile manufacturers offer for these purposes the use of ceramic plinth, which will harmoniously fit into the interior. Moreover, in addition to decorative qualities, this finishing element facilitates the care of tiled flooring, leaving no traces of cleaning on the wall finishing material. It is difficult to even imagine a plinth made of wood or plastic in combination with ceramic floor tiles, the difference between these types of finishes is so great.

What can replace the ceramic plinth?

Tiles have long been used for finishing the floors of kitchens, hallways, bathrooms and toilets, in the case of separate placement of sanitary facilities in the apartment. Ceramic plinth for the floor was created by ceramic manufacturers not so long ago. How did you previously get out of the situation if it was necessary to finish the junction of the floor and walls?

Everything is very simple. Ordinary ceramic tiles were used, which were cut into three or more pieces using special tools, depending on the chosen width of the plinth. Considering that not all tile cutting devices ensure the evenness of the cut edge, one could not even dream of the impeccable beauty of such a border. However, it was a more or less acceptable way to give the room a special look.

In the bathroom, a ceramic plinth is allowed not only from below along the perimeter of the wall, but also in the form of a rim at the point where the sink and bath come into contact with the wall cladding. Placing the bath close to the wall is a purely Russian invention in design, associated with the small size of bathrooms in apartments with a standard layout. Europeans have a different approach to this issue, placing the bath in the middle of the room on a small podium.

Nevertheless, manufacturers respond to the peculiarities of consumer demand, because this allows them to increase the number of sales of their products. Therefore, tile collections are complemented not only by various decorative inserts, but also by ceramic plinth. This commercial offer saves buyers from the artisanal methods of finishing the joint of the floor and walls associated with cutting tiles.

What should be considered when buying?

You need to worry about buying a ceramic skirting board that is suitable in style. It is best to purchase a ceramic floor plinth along with tiles, making a calculation based on the dimensions of the room. This will ensure that the decorative element matches the selected tile not only in size, but also in color. Do not forget to purchase special corners, both internal and external.

Depending on taste preferences, you can choose a skirting board that contrasts with the main color tone of the tile. In some cases, this emphasizes the geometry of the room and introduces austerity into the interior, to which all lines are subject, attracting attention with their contrasting color.

How to mount it correctly?

Manufacturers produce this finishing element light and thin, which allows using ordinary tile adhesive used for gluing wall tiles when laying it. The height of the skirting board is calculated by the manufacturer, taking into account the height of a particular collection of tiles, in order to ensure their harmonious combination in the interior. The top of the plinth is made in the form of a chamfer - a rounded cut that gives the product an elegant and sophisticated look.

When calculating the required amount of decorative plinth, a 5% surcharge to the minimum volume is taken into account. This stock can come in handy at the time of laying, if there is a chipping of the plinth or an accidental breakage of the material. Spare skirting boards can also be used to locally repair damaged finishes.

Summing up, it can be noted that ceramic plinth is appropriate in rooms with tiled floors. Do not forget to purchase this additional finishing element if you start laying floor tiles in your apartment.

We will talk about how to choose the right decor in this article. In addition, we will analyze in detail what kind of porcelain stoneware skirting boards and made of artificial and natural stone are, as well as where they can be used.

Use of stone and ceramic skirting boards

Most often, a tile skirting board is used to decorate a kitchen, bathroom, bathroom or corridor. You can also buy strips designed to mask the gap between the bathroom and the wall. The porcelain stoneware version, as well as planks made of natural and artificial stone, among other things, can be used to decorate the floor in the main rooms - halls, bedrooms, offices. In any case, this decor makes the floor finish finished and neat. Like in these photos:

Ceramic slats

The advantages of such a decor as a ceramic tiled plinth can primarily be attributed to its resistance to moisture. Unlike plastic in the bathroom or kitchen, it will never turn yellow, and unlike wood, it will not deform.

Ceramic plinth for the floor. Photo planks of standard sizes

The disadvantages of ceramic plinth include, first of all, its fragility. These straps do not take strong blows.

Ceramic bathroom skirting board

Previously, hand-cut ordinary tiles were used to mask the gap between the bathroom and the wall, as well as between the floor and wall tiles.

Ceramic plinth for a bath. Photo of an option that closes the gap between the side and the wall

This decor did not look very neat. A modern factory ceramic bath skirting board looks much more creative. Its edge is rounded, rolled and smooth. The length of such strips is a multiple of the length of the tile itself, so it is very easy to mount them. As a decor in the interior of the bathroom, a tiled plinth can be used, which has different sizes and colors.

In the bathroom, flat ceramic planks can look very impressive.

The height of the ceramic floor plinth is very different. The wide version is usually used in large rooms, the narrow one in small ones. To decorate the corners, a special tiled corner is used. This eliminates the need to cut the planks at a 45 degree angle to fit.

Easy-to-install corner piece made of ceramic

Planks for the bathroom

In the interior of a bathroom, a ceramic tile plinth can also play a very prominent role. The toilet with its use looks unusually neat.

Mosaic skirting board option, perfectly complementing the design of the bathroom

Laying ceramic planks in the bathroom, as well as in the bathroom, is carried out on ordinary tile glue and is nothing complicated.

Ceramic planks in the interior of the kitchen

In the kitchen, a tiled skirting board is used both for decorating the floor itself, and complete with a countertop.

A tiled skirting board completes ceramic flooring in the kitchen

In the latter case, ceramic strips can either repeat the color and texture of the countertop surface, or be made in contrast. Ceramic decor with patterns and ornaments is also often used.

Very effective ornamented tile plinth

Porcelain slats

Porcelain stoneware skirting boards can withstand much higher temperatures than conventional ceramics. Therefore, for the kitchen, in the event that the countertop is located next to the stove, it is worth choosing a model made of porcelain stoneware with the corresponding slats.

Porcelain slat options

Stone plinth

Stone plinth floor ordinary comes with tiles of the same material. Available as an artificial version, as well as expensive models made of natural stone.

Planks made of artificial stone

Plinth made of artificial stone is most often used to decorate corridors and large halls. Sometimes it is used to decorate living rooms and offices. There is also a version that comes with stone countertops and sinks. Planks made of artificial stone usually repeat the color and texture of the surface of the countertop or floor.

Spectacular washbasin made of artificial stone with the same frame

Planks made of natural stone

A natural stone skirting board, just like the tile itself, can look simply chic. Especially popular are marble and granite options, as well as sandstone planks.

A marble countertop will look dignified even in the richest interior.

Such floor decor is also produced from expensive ornamental stones - jasper, onyx, malachite, etc. Its cost, of course, is simply sky-high, so it is not used as a floor option in private cottages (except for onyx).

Onyx countertop with plinth - a luxurious piece of furniture

Although a countertop, say, made of jasper or onyx with an appropriate plinth, is quite affordable for wealthy citizens. Orsk landscape jasper is especially beautiful.

It is very esthetic, but at the same time the floor plinth marble is rather difficult in leaving. Floor slats made of marble, for example, cannot be cleaned with powder household products, as scratches appear on its surface.

Planks made of natural stone can have a polished, sandblasted (sandblasted) and brushed (metal brushed) surface.