Big and warm hello to all! For a long time I did not write in the "DIY" section. Regular readers probably forgot that such a thing exists. But oh well, I'll fix it today. And I will share with you very cool ideas on how to make a phone stand with your own hands.

Recently I have been reading a lot, studying information, watching videos. But holding the phone in your hands is not very convenient. And it happens that, for example, I cook food, cut food, and the phone has to be propped up with whatever comes to hand. And suddenly an idea came to my mind, why not buy a stand in the store, which will greatly facilitate my life. After searching the Internet, finding the answer to the question of what and how much it costs, I came across a photo that depicted the same thing, but made in seconds and with my own hands. Then the thought lit up in my head, to put together a few inspiring ideas. And as a result, an interesting post was born, I hope. So, let's begin!

I propose to start with the very best option for a paper phone stand. You can build it anytime and anywhere, the main thing is to have a sheet of paper about A4 size on hand. I think this idea will appeal to students and schoolchildren. The main principle here is to take a sheet of paper, preferably thick, folded lengthwise to get at least 3 layers, but of course everything depends on the width. Then again it is necessary to fold the paper, making folds across so that 3 wide edges of the same width and one small one are formed. Look at the photo, it clearly shows what should happen in the end. And the last step is to make two small folds.

I can’t even imagine who can keep such a rarity as a box from under tape cassettes for a tape recorder. But it turns out that such an object, which would seem to be completely useless, can be used. In a couple of seconds, turning it over in a certain way (see photo), you will get a very cool smartphone stand. Moreover, if you paint it with paint from a bottle, then few people will guess what it is made of.

If you have several manufacturers from the designer lying around at home, then it is quite possible to build a structure in order to keep your phone in a horizontal position. And this is done in a matter of minutes. And it is also easy to disassemble it, putting it back in place.

A plastic card as a phone stand? The idea is bold, but very real. You just need a couple of cards and strong scissors. Cut the details as shown in the photo and enjoy watching videos, photos and reading e-books.

The next way to make your life easier is to stock up on six pencils and four rubber bands. In fact, you need to make a three-dimensional figure, as shown in the figure. Start with a simple triangle, then add one edge at a time, holding it all together with rubber bands. Get the original supply for the phone.

Having a couple of wooden cuts in the house, it’s really possible to make an interesting and original, and most importantly, durable device for smartphones. You can glue the parts with hot or universal polymer glue. Indeed, such a design will serve you for a very long time.

And here are some more life hacks for the phone, allowing you to maintain them while charging. Such devices are needed mainly when there is simply no place to put the gadget, if there is no table or cabinet nearby. Such holders are made from a plastic bottle, as in the first case, or from thick cardboard, as in the second.

How many toilet paper roll ideas I've seen, but this one! You will need the sleeve itself and 4 paper buttons (to be honest, I don’t know what they are called correctly). Attach them as legs, cut a hole in the top to fit your phone, and enjoy the result. Of course, it is better to decorate such a stand with something or just paint it.

As you already understood, making a paper phone stand is the easiest option. So, you will need a piece of very thick cardboard. If there is none, then make it from several layers, gluing to each other. Cut holes in the part as shown. Moreover, such a holder is suitable not only for smartphones, but also for tablets.

Well, the very last of the ways I suggested to make a do-it-yourself phone stand is to use a clerical clip. I'm sure everyone has it, and if not, then it's not very expensive in stores. Take a couple of such devices, bend one rounded part of the paper clip inward. It will serve as a barrier for the phone so that it does not roll off. Nest one binder inside another. Place the smartphone so that it rests on one ear, and the second one is bent from the side of the screen. Here's a simple holder for you!

That's all for today, I hope you liked the ideas and got inspired to make one of the presented gizmos! See you soon!

Let's remember the good old tree. This ancient, classic material will look very elegant with "modern plastic". The main purpose of the stand is:

• practical use as viewing convenience
• highlighting and fixing a place where you can always find a device, and not look all over the apartment, "remembering where I was with it the last time"
• and of course, stylish interior decoration)

Let's get inspired to create something cool! Not everything can be bought in a store, not for every phone for sure (Take a look at these photos, maybe you already have an almost finished "piece of wood" lying in the pantry for a long time)

or here is a shelf-socket

A few cuts on the bar and we get a simple and practical tilt stand!

See how ingenious and simple! Pocket option.

Imitation of untreated wood, "carelessly" lying on the table

Now it's more difficult. Below is an elegant solution to the age-old problem of the armrest of a sofa or chair. The stand can be brought to a small mobile table.

Now let's take a look at the tablets. With more effort and time, you can make yourself a very beautiful stand for a tablet computer. But you can use it as a monitor.

or like this

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared ...

By Masterweb

30.05.2017 20:57

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is a great solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; gypsum; any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white paper, which will then be decorated; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments that will be appropriate should also be kept on hand.

Properly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone.
Sequencing:

First you need to figure out what shape the stand will be. After that, you need to draw templates of the required sizes on the sheet. Elements for the product are cut out from them. Then, carefully, according to the diagram that was previously drawn or printed from some site, we glue the necessary details. wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used. After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

special equipment; skills; the ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

tree from which the structure will be constructed; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product. Then you need to put marks on a wooden base, according to which the connector will be cut out in the future. The next step is to cut out the shape with the available tool. To do this, you need to glue the prepared spare parts. The next step is to make the product smooth. This can be done with a file or a special mains-operated device. When the surface is smooth, you can paint the finished shape with some color. After staining, you must wait for the product to dry. The work is completed by gluing the accessories selected for this mission. open with varnish, which will give shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has an unusual look can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

Today it is impossible to imagine a modern person without a mobile phone, because it is not just a necessary thing, but a stylish accessory. But the mobile phone has one significant drawback - it is often lost. To no longer face the problem of tedious searching, you need to define some permanent place for the device - for example, a stand. You can buy it at the store or make your own.

How to make a simple phone stand

If you decide to create a stand yourself, you should first prepare all the necessary materials - a beautiful fabric, PVA glue, scissors, a marker, a stationery knife, a plastic container that should have a flat shape (you can use a jar from any cosmetic product).

First you need to go through all the empty bottles and jars in the house - choose the one that is the right size for your phone and wash it thoroughly using hot water. Now you need to dry it well to remove all moisture, otherwise your stand will not last long.

We take the phone and apply it to the container, while placing their lower planes at the same level. With the help of a marker, we leave a mark on the bottle - we highlight the height of the future stand, which will be as comfortable as possible for you. On the front of the bottle we make a horizontal line and continue it on the sides.

We turn the bottle and draw its holder on the back. We make it with a sufficiently large hole that will fully correspond to the size and shape of the “plug” - it should pass into it quite easily when charging the phone.

Using a clerical knife or scissors, cut out the stand along the already outlined contour. We take sandpaper (fine) and carefully process all the edges until they become perfectly smooth. It is necessary to go over the rest of the surface of the future stand with sandpaper, as it should acquire a slight roughness in order to better bond with glue.

Next, take a piece of bright fabric (here you can use any material). The main thing is to take such a segment that it is completely enough to wrap the entire stand. Lay the material face down.

We lubricate the front wall of the future stand with sufficiently thick layers of PVA and press it as tightly as possible to the fabric in those places that were determined earlier. Now we glue all the sides of the stand with glue, do not forget about the back, which also needs to be processed. We strongly stretch the fabric so that there are no air bubbles or wrinkles left. In the same way, we wrap the fabric in the bottom area - we must try to fix it well in the shape of the bottle.

As soon as the matter is evenly distributed over the surface of the bottle, and you fix it with glue on all sides of the product, except for the bottom, take scissors and carefully cut off all the excess as close to the edges as possible. Then apply another layer of glue.

According to the shape of the bottom of the bottle, cut out a piece of material separately and glue it from below to gently close all the cuts. We cover the bottom with an additional layer of glue.

At the end, you need to dry the stand well - you need to place it in such a way that the product does not come into contact with anything. We hang the stand on some kind of hook, spoon, pencil, pen, or put it in a glass.

As soon as the product is completely dry, using a clerical knife, carefully cut a hole in the holder. You need to check whether you have fixed the material on the sections well. All protruding edges must be carefully glued.

Convenient and stylish mobile phone holder in the car

This stand option is ideal for phones with a wide display and a long body. You can make such a model yourself, besides, it is very convenient to use and is perfect for use in a car. And it only takes a couple of minutes to create it.

So, you need to take a binder (this is a clip that is used to fasten sheets of paper together). You also need to pick up a suction cup, which will become a mounting device. In the place where the suction cup has a hook, we attach a binder to it and our phone stand is ready. You can easily attach it to any convenient place.

Attach a suction cup to the back cover of the phone (do not worry, it will not damage its surface, and there will be no ugly marks left). You can easily place the device not only in a vertical, but also in a horizontal position.

Mastering the technique of modular origami

You can make a phone stand using the modular origami technique. First you need to collect 24 white and 23 pink modules. The colors of the blanks can be chosen to your taste!

In a circle, we fasten the white modules together in such a way that a circle is formed, while between each pair of whites, you need to insert 1 pink module. As a result, you will get a cone, gradually tapering towards the top.

This design must be continued until the stand reaches the desired height, which must be determined taking into account the size of the phone. The device will be placed in the central part.

Do-it-yourself phone stands: photo

Useful and accessible video tutorial

Mobile communication devices are in every home, they have become almost indispensable for a modern person and perform a lot of functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the best options is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

The easiest way to make a DIY phone stand out of wood is to simply make it from a regular plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to handle the functional load. As a base, such a homemade phone stand can have any wood and can be shaped into any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will spoil the appearance of your gadget.