A step-by-step master class on decoupage of a coffee table at home using improvised materials. This coffee table decoupage can be done by every round table decoration

Decoupage is a very elegant art, subject to everyone. Even if you are very far from needlework, you can still easily master decoupage. With the help of this technique, you can breathe new life into old furniture and decor elements. For example, a coffee table is an unremarkable thing. Everyone has these tables in their home. But by applying decoupage, you will create a real work of art with your own hands, which will decorate the design of your interior in the most successful way.

Image selection

If you are new to decoupage, then it is best to use special napkins to decorate a coffee table. Such napkins can be bought in needlework stores. Pictures on them can be very diverse, choose the one that your heart desires. In addition, there are also decoupage napkins with relief. They are made by cutting.

If your table is very tiny, you can simply print the desired image on the printer. But if you plan to decorate a large coffee table, then you will need a rather big picture. In this case, a regular geographic map will do just fine. Especially well this option will fit into the English interior design.

The most experienced craftsmen can use non-standard materials for work, such as lace, fabrics, pages of old books, newspaper clippings, and photographs. The complexity of the work lies in the fact that non-standard material must first be thinned, and decoupage napkins are immediately ready for use.

Work technique

Do-it-yourself decoupage design is carried out in several stages. Let's analyze each of them:

At the preparatory stage, you need to remove the countertop from the legs and carefully clean off the old layer of paint from it. This must be done with a grinder. The smallest notches and drops of paint are removed with sandpaper. When the surface is ready, the tabletop can be put back on its legs.
After that, it is important to remove all cracks, defects and irregularities. You can do it yourself with ordinary putty. When you are done with work, let the table dry for at least 3-4 hours.
Now the table needs to be primed and you can start painting with acrylic. Such staining is a simple but lengthy process. The fact is that over time, dark spots may begin to appear from under the acrylic, which will spoil the whole design. To prevent this from happening, you need to paint the table in three layers. Each layer must dry for four hours.
After acrylic, we apply a layer of varnish (the easiest way is to use varnish in a spray can). When the varnish dries, the table will need to be sanded again.
Finally, comes the most creative process. You need to cut out all the images and figure out how they will be placed on the table. These can be individual pictures (for example, flowers) or a whole complex picture of fragments.
The image must be placed on a cellophane surface (for example, on a regular file) and held under running water. The table should be greased with glue. Any glue will do, even PVA. The wet image must be carefully transferred to the glue.
When the glue dries, you need to apply the final layer of varnish on the table. On this, your design with decoupage with your own hands is ready!

Additional effects

To make your coffee table design look even more unusual, you can add additional effects to decoupage:

Craquelure is a technique that consists in creating artificial cracks. This type of decor is suitable for vintage interiors. Cracks are created with a thick layer of varnish and a hot air dryer.
With the help of wax and sandpaper, you can create decorative scuffs with your own hands - a sure sign of shabby chic style.
Patination is another option for aging a coffee table. The artificial darkening of the surface creates the feeling that hundreds of hands have taken it over the years.
Potal is decoupage using gold and silver paints. The coffee table with potal looks extremely luxurious.
Shading is a common technique in decoupage. With the help of paints and a sponge, you can create a smooth transition from drawing to background.
Toning is usually the final decoupage technique. It consists in opening the product with varnish, to which glitter has been added.

The modern market is flooded with a huge variety of materials for decorating rooms, furniture, which makes it easy to update an old coffee table without resorting to the services of professionals. In addition, a variety of types, special effects used during decoupage, allow you to achieve a harmonious entry of the updated table into any interior style of the room.

Quite often in life there are situations when you get a table, and after a short time it starts to annoy you with a boring design. However, you should not rush, because today there are so many products that allow you to easily change the style of a coffee table ready to be thrown away. At the same time, among the most common decoration methods, it is worth highlighting:

decoupage - occupies a leading position relative to other means, since it opens up the opportunity to show an unlimited scope of imagination with a complete lack of experience in this matter;

mosaic - a rather small range of variable images, but the combination of different shades sometimes amazes with the uniqueness of the design;

painting is an interesting direction, although it requires certain skills and abilities.

It may be worth trying to decoupage an old coffee table, instead of purchasing a new table for a considerable amount of money.

Types of decoupage

Based on the surface intended for decoration, and the effect of the finished product obtained in the finished form, 5 types of decoupage are distinguished:

direct decoupage - consists in gluing a decorative element onto a previously prepared front side of the surface, followed by varnishing;

reverse decoupage is used when decorating surfaces made of transparent material (for example, glass). In this case, the picture is glued not from the front, but from the wrong side, after which the application of paint, varnish and other layers follows, i.e. the sequence of work regarding direct decoupage is carried out in the reverse order;

smoky decoupage is characterized by blurring the boundaries between the main background and the decorative element. This type of decoupage reliably models artistic painting through a combination of various techniques, effects;

Volumetric decoupage is quite often combined with other types of decoupage. The volume of the surface to be decorated is given by means of eggshells, special paste, thermal film, fabric and other materials. In addition, the visual volume of the image is achieved by applying in each layer of varnish a pattern that decreases in size towards the finish coat;

decopatch in its finished form is associated with a patchwork quilt, but such decoupage from fabric is rarely performed. The most common material for this type is a special paper that imitates fur, leather, fabrics. At the same time, the decorated base is covered completely, and not with separately located motifs.

Despite the similarity of the execution technique, all types of decoupage differ significantly in the result obtained.

Effects used in decoupage

To achieve the style of the decorated object, as close as possible to the overall interior design, the effects produced using certain materials and decoupage techniques greatly help.

The main decorative effects include:

craquelure is a crack artificially formed in the texture, simulating an old thing. The craquelure effect is created by applying a special varnish over the main background paint. To achieve a better effect, the surface can be exposed to hot air from a hair dryer, since cracks are obtained as a result of shrinkage of the binders and uneven drying of the top layer of varnish. At the same time, the size of the cracks largely depends on the technique of applying strokes and the thickness of the varnish layer;

abrasion imitates a constantly used item for a long time, as a result of which some places turn out to be shuffled. To obtain the effect, the necessary places on the surface are rubbed with wax, after drying of which they are rubbed with fine-grained sandpaper;

patination is manifested in the darkening of the surface in order to age things, resulting in the effect of frequent touching the object with hands;

potal - the use of gold or silver paints in decoupage when outlining the contour of the applied image, or as applying an independent pattern. At the same time, instead of paints, special sheets are often used that look like gold leaf;

shading is quite often used in reverse decoupage and consists in achieving a smooth transition from the applied pattern to the main background. Creating the effect comes down to applying paints with a dry brush in the area of \u200b\u200bthe borders of the picture, followed by shading with a foam sponge or pimping;

toning enters the final stage of decoupage, when the updated surface is tinted by adding small sparkles to the varnish or applying archaically located spots as conceived by the designer. The toning effect allows you to add additional picturesqueness to the decoupage surface.

When decoupage the surface, it is quite possible to combine several decorative effects (for example, craquelure and gold leaf in volumetric decoupage).

Decoupage materials

To decoupage a coffee table with your own hands, you will need:

brushes with synthetic bristles for painting a contour or any elements, applying paint, varnish, glue, as well as a fan-type brush for gluing elements from a napkin;

sharp scissors - you can use manicure, stationery, special ones;

coarse, fine-grained sandpaper;

paints - watercolor, honey or professional;

titanium or zinc white;

PVA glue;

acrylic lacquer;

foam sponge or tamping;

motifs - napkins, free decor, printouts, decoupage cards, etc.

This list can be replenished or reduced in relation to the updated surface, the selected type and complexity of decoupage, special effects.

Coffee table decoupage technology

Before updating an old coffee table, it is necessary to carry out a number of preparatory measures, the thoroughness of which will affect the finished product.

Table preparation

When preparing a table, the amount of preparatory work directly depends on the material from which it is made.

If the table is plastic, then degrease its entire surface well enough.
If the table is wooden, then:

if possible, disassemble the table into its constituent elements;
using first large and then fine sandpaper, carefully remove the layer of old paint or varnish from all the component parts and assemble the table again;
putty irregularities, deep cracks, joints and let the putty dry;
apply a layer of primer to the surface of the table using a wide brush;

after the primer has dried, apply 2-3 coats of paint, drying each coat well to avoid cracking or staining;
to create artificial cracking, craquelure varnish can be applied to the paint and, without waiting for complete drying, cover the table with white acrylic;
after the acrylic layer has dried, you should start gluing the motif;
if the craquelure effect is not used, then the paint is varnished. Moreover, using an aerosol varnish, the surface is covered with a more even layer;
after drying, walk on the surface of the table with fine sandpaper for better adhesion of the decoupage material to the base.

Preparation of decoupage motifs

Carrying out decoupage or coffee table design, you can use not only professional napkins, films, but also clippings from ordinary magazines, newspapers, photos from an album. At the same time, the process of preparing motifs for gluing is far from the same, therefore:

1. If a multi-layer cloth is used, only the top layer needs to be peeled off. When using a specific napkin motif, it can be cut or torn out when drawing the picture after gluing.

2. If a photographic image is used, then the material must be thinned by:

rolling off the wrong layer. Varnish is pre-applied on the front side to avoid spreading the image, after which the photo is placed face down on the file, and a little water is poured on top. As soon as the bottom layer is saturated, you can start rolling off unnecessary thickness without damaging the image. Upon completion of work, thoroughly clean the surface of the remaining pellets;

gluing the tape on the wrong side and then removing it along with the bottom layer of paper. If necessary, repeat the procedure until a colored layer appears.

3. When using decoupage cards, the motif is simply cut out strictly along the contour. Before direct gluing, the motif is soaked in water for 10-15 minutes, after which it is dried from excess water on a napkin.

4. The preparation of the freedecor film is similar to the preparation of decoupage cards, with the only difference that the film is equipped with an adhesive layer, so after soaking it is immediately glued to the base.

Options for gluing motifs to the base

Currently, there are 3 ways to glue the motif to the surface:

1. The hot method is based on the use of an iron, therefore it is suitable for perfectly flat surfaces:

apply a thin layer of glue on the base and leave until the top layer dries so that it does not stick. In this case, the middle of the adhesive layer should be wet;
apply a motif to the dried glue and carefully smooth it with your hands;
Lay parchment carefully on top.
heat the iron to the maximum, while the steam function should be turned off;
iron, gently pressing, the workpiece with the image, especially the edges;
remove parchment;
if the edges are poorly glued, then the procedure should be repeated.

2. The dry method requires extreme care. The procedure for gluing the motif with a dry method is as follows:

put the image on the base, straighten it;
dipping the brush in glue, glue the motif to the base, moving from the center to the edges;
the glue protruding beyond the edges of the image must be immediately removed with a cotton pad dipped in water.

3. The wet method is to use a stationery file:

lay the motif face down on the file;
dilute glue or acrylic varnish in water in a ratio of 10: 1;
pour the prepared mixture onto the file and wait until the motif is thoroughly soaked;
the folds that appear during the wetting of the motif must be smoothed out, and the air should be carefully removed to the edges;
drain excess liquid;
carefully attach the file with the motive to the base, slightly leveling with your hands;
if the motif does not peel off, then you can pick up the edge and reattach the file to the base;
if, when deleting the file, a gap formed on the motif, then by adding a little water, you need to correct the situation with your hands.

Thus, when gluing the motif on the tabletop, you can use any, the most acceptable, method.

Final decoupage work

If necessary, outline the contour of the glued motif or supplement the image with artistic painting, apply the effect of creating shadows, toning, ceiling and others.
Let dry.
Apply 2-3 coats of topcoat varnish at the intervals required for each coat to dry.

To make the finish smoother, the following method will help: pour water into a small bowl and, dipping your finger into it, smooth out the stripes left by the bristle of the brush. This procedure is carried out immediately after applying the varnish, until it seizes.

Thus, in order to decoupage a coffee table, a master class is not at all necessary, because having become acquainted with the main types and effects of decoupage, as well as the technology of work, you can easily create your own unique masterpiece, while realizing all your fantasies.

decoration surfaces is a budget way update interior and return old things to their former beauty. One of the methods of decorating furniture is technique decoupage.

Translated from French"Decoupage" means "cut out". Essentially, this technique is application but looks real painting.

On pre processed the surface is applied with a special decoupage glue with a paper layer with a pattern. Everything is anchored on top. varnish.

It only takes patience and patience to master the method. accuracy.

Materials and tools

For decoupage it is better to take rice, banana paper or decoupage card.

If there is no such paper, then it will do. ordinary layered napkin. Pre-need divide it in layers. For decoration we need the most upper thin layer with a pattern.

Can buy special decoupage glue (for example, MOD PODGE) or dilute normal glue PVA with water in proportion 2:1. As shows practice, special adhesive is required when working with printed out pictures, and PVA is suitable for everyone else.

For decoration we need materials:

napkin or any thin paper with a pattern;
colored rice paper;
dye for the base;
golden edging paint;
acetone(for degreasing the surface);
primer(preferably acrylic);
transparent varnish for fastening;
painting scotch;
putty;
furniture wax.

Note! Thin paper is highly susceptible to surface wrinkles. If you need to make a perfectly flat table, this paper is not recommended.

In addition, you need to prepare the following instruments:

brushes for glue, paint and varnish;
scissors or stationery knife;
emery paper;
wadded tampons for degreasing the surface;
roller for edging;
application tool putties.

Table surface preparation

Before proceeding to decoration table, you need prepare all surfaces.

Step 1. If the furniture is broken, it should be repaired, and chipped, cuts and cracks putty. In deep cracks before putty, furniture is laid wax.

Step 2 After that you need very well sand table surface. It will help delete all available shallow scratches, defects and make the table smooth.

Step 3 Then degrease work surface with acetone and cotton pads.

Step 4 At the same distance from the edges of the tabletop we draw lines - borders the section of the countertop on which the decoupage.

Step 5 We prime the inner square.

To borders primed area turned out clear and neat, around the perimeter you can stick building scotch.

Step 6 Sanding after drying fine-grained sandpaper and priming second time. This is necessary to fix the primer layers.

We grind sandpaper primed surface. preparatory work is completed. Can proceed to decoupage.

Important! It is necessary to process wooden surfaces with sandpaper only along the fibers, otherwise there will be more irregularities and burrs.

Decoupage stages

With the help of decoupage old tables you can create a real masterpiece, after all, the field for activity is very spacious.

There are several options decoration:

decoupage the whole table(together with legs);
decoupage countertops;
decoupage parts table (only legs, drawers or some part of the tabletop - a corner, Centre, half).

To an updated table harmoniously fit into the interior, you can perform with the same motives.

Step 1. Lay out colored rice paper in okay, how we will glue it - we denote the future picture.

Step 2 We draw and cut on the right pieces of all the paper. Cut the napkin sizes square, which will remain in the very center.

Step 3 Let's start decoupage. Picked up on a brush moderate amount of glue. It shouldn't be too much too little (then the part will peel off) or too much (the paper may tear, the design will dry for a long time). We stack first a sheet of rice paper in its place and above We start to impregnate it with glue. All movements go from the center of the part to its edges.

When all the details impregnated glue, with the same brush gently smooth out her. After drying, the adhesive will become completely transparent.

Step 4 Thus we glue the first row details of our table. Then we proceed to the second row, consisting of light and more subtle stripes.

Step 5 Having successfully laid both rows, we paste the most bright part of our composition. To do this, separate the top from the napkin. layer with a pattern and put it in the middle of the table. In the same way (from the center to the edges), we impregnate the square with glue and remove everything bumps.

Step 6 When impregnated paper towel increases in size and extends beyond the edges of the inner square. She needs to be slow undercut utility knife or scissors.

Step 7 Fully dry glue. The table surface must be dry.

Step 8 Along the very edge external a square of rice paper, we also glue a painter's square with a square scotch. Stepping back from it a couple of millimeters to the edge of the table, we glue a square of a little more size.

Step 9 With a roller and gold paint on the resulting stencil with tapping movements draw edging. We dry.

Step 10 Covering Our Table colorless varnish.

Decoupage of the surface completely

Step 1. Held preparatory work.

Step 2 After grinding, cover the entire surface of the countertop beige paint.

Step 3 Put on a big piece rice paper in the middle of the table and correct as we need. With help wide brushes start carefully apply glue starting from the middle of the table.

Gradually moving towards the edges. If a sheet of paper does not cover the countertop fully, then first you need to lay out all the pieces of paper and dock them with each other. Only after that it will be possible to start impregnation. We begin to impregnate each piece with middle to the edges.

Step 4 For smoothing, use small flat weighting agents, with which we carefully level the surface. Strongly crush on paper is impossible - impregnated glue it becomes even more prone to breakage.

Step 5 The paper that remained along the edges of the table, can be cut with scissors or stationery knife. The very edges of rice paper need to be peeled off sandpaper.

Step 6 All other parts of the table should be painted dark paint. Places that are close to decorated surface, paint over with a thin brush, short careful movements. We dry.

Step 7 Covering the table transparent varnish.

Learn the decoupage technique easily. Enough desire and some materials, which can be purchased at any hardware store.

Often decoupage used in conjunction with others tricks decoration. Additional decor acts as a finishing option legs or countertops paint through stencil, table painting manually thin brushes, pasting edges lace, spraying paints of various colors - there are many ideas. Perhaps you will succeed come up with something else, even more interesting.

Master class on decoupage technique, see video:

What could be better than creating the things you need in the house with your own hands. And when you add your creativity here, invest your soul, it will be doubly pleasant to use these things. And it will be even more pleasant for you from the fact that only you have an original item that no one else has. And our article will help you with this.

Decoupage coffee table

Decoupage is the art of decorating, decorating with all kinds of patterns and applying them to various objects, combined with special techniques of aging, cracking and coating with various colors. This art has existed since the 18th century and is very popular nowadays. It is available to everyone who is not indifferent to creating unique creations with their own hands (for example, this one)!

To make your creative process easy and fast, you need to prepare the items you will be using. You will need:

Sandpaper
acrylic primer
Synthetic fiber brush
Rubber gloves
Ruler
simple pencil
Printed images on photo paper required for decoration
Plate with water
PVA glue
Hard bristled brush
White and black acrylic paints
Stencil
Stencil brush
Finish acrylic lacquer
Scissors
Stationery knife

And when all the tools are in front of you, you can start creating!

1. Initially, you need to prepare the very "canvas" of your future painting, namely the surface of the table. To do this, you need sandpaper, with which you need to remove the top layer of paint and sand the bumps. You should get a completely smooth surface.

2. When the surface is ready, you need to process it. For this you will need: a synthetic brush, acrylic primer and rubber gloves. The last item is completely optional (but desirable), because. neither the primer nor the paints used in the future will in any way harm your skin of the hands and can be easily washed off with water, in extreme cases there is an excellent remedy for this -. Using a brush, gently apply acrylic primer to the surface of the table. It is needed so that the paint applied in the future lies tightly and evenly on the wooden surface. After that, you need to let the surface dry for half an hour.

4. Now take a picture printed on photographic paper and put it in a plate of water for half a minute, but no more, because. the picture may fade. Next, take it out of the water and put the image on the file.

5. Very carefully roll up the top layer of paper, as shown in the figure, so that the image itself remains intact. Then apply PVA glue to the paper surface with a brush.

6. Now you need to carefully turn the file along with the picture to the place marked just for it. Smooth it out gently to remove any air bubbles.

7. You will then need a hard bristle brush and white acrylic paint to paint all the fields around the pictures. The brush must be kept under one slope, because. the brush has bristles that leave a "striped mark", giving the table a linen texture. Now you need to leave the surface to dry for one hour.

8. The time has come for drawing a picture on the corners of the table using a stencil. Here, in addition to the stencil, you will also need: a stencil brush and black acrylic paint. Place the stencil with the pattern on the corner of the table, dip the brush into the paint and apply the paint with dotted movements to the outlines of the pattern. Those. You need to hold the brush vertically so that the paint does not spread and does not flood under the stencil - this is necessary so that the drawing is clear, without streaks.

9. After you have applied the paint, you need to carefully remove the stencil and allow the drawing to dry for one hour.

10. The last stage of creating your masterpiece has come. After the paint has dried, it is necessary to apply a finishing acrylic varnish, it can be applied with a stencil brush, after rinsing black paint under warm water. It will fix the whole process of making a coffee table.

11. And now your coffee table is ready! It must be left to dry for 24 hours. Then you can use it for its intended purpose and enjoy your masterpiece!

Master class: "Decoupage of a coffee table" was held on "Excellent". Anyone interested in this art will certainly cope with this. And if you also learn with your own hands or master it, then perhaps this will be your main income.

We wish you creative success on the way of creating masterpieces with your own hands!

And if you are already completely tired of all this and you want to give a damn about everything, then in the article you will learn how to get rid of all the things that are nasty and unnecessary to you.

And now our traditional video: Decoupage master class.

What a pity it is sometimes to part with old favorite furniture that has lost its attractive appearance! Decoupage of the table will help give it a second life. And the skills acquired during manufacturing will be useful for transforming the rest of the furniture. After all, it is very pleasant to create with your own hands a work that will be unique in its essence and demonstrate such pictures close to the heart. You can make a decoupage of the table with your own hands with the image of loved ones, who from now on will always be there. Such a fashion was present in the 20th century, when familiar faces smiled on the desktop under the plexiglass.

Preparation for work

Before you start working directly, prepare the necessary tools and materials. To date, there are many specialized stores selling the raw materials necessary for this work. It is also possible to collect everything you need at home, after making a list, so as not to be distracted later.

Instruments: art brushes, pencil, brush, sponge, water container, files, ruler, scissors, spatula.

Materials: acrylic paint, primer, varnish, sandpaper, PVA glue, putty, laundry soap, napkins, clippings, templates.

Before you make the decoupage of the kitchen table with your own hands, you must thoroughly wash its countertop with a solution of soapy warm water. It is also advisable to pay attention to greasy stains and be sure to degrease them with an alcohol solution or a quality dishwashing detergent. Then sand the surface with sandpaper until the tabletop is absolutely smooth. If cracks or pits are found, they must be carefully leveled with putty. Be sure to wait until the countertops are completely dry and feel free to get to work.

Phased work

First of all, you should prepare pictures for decoupage countertops. It is very convenient to use ordinary table napkins, newspapers, magazine clippings, etc. for these purposes. They must be carefully cut out and laid out on the countertop in the form of a pattern that was carefully thought out in advance. Circle the pictures with a pencil, then collect and put the prepared files in their place.

Operating procedure

It is necessary to pour water at room temperature into the vessel and immerse the tenderloins there for 50 seconds.
Carefully remove the drawings from the water and place them face down on the files. Slowly roll up the top layers of paper until the last brightest row is left.
Lubricate each drawing with a brush with PVA glue.
Flip the files with drawings and place them in place of the outlines on the tabletop. Smooth and press the clippings through the file until the folds and tubercles disappear completely, carefully remove the files.
Then you should start painting the surface of the table around the drawings. This should be done with a hard brush soaked in paint, while trying not to touch the clippings.
The next step is to design the corners using templates. This process is optional, but the idea of painting over the corners, especially if you use a different color, is very original. Templates should be cut out clearly according to the size of the corners, attach them to the table and paint over the inside. After a while, they must be carefully removed, trying not to smear the paint on the countertop.
Wait for complete drying, which will occur after 2 hours.
The final step is to cover the surface of the table with acrylic varnish. For this process, you need to take a very soft brush and cover the countertop with two layers of varnish. It will create a sufficiently strong protective layer that will help to operate the table for quite a long time. The product will be able to dry completely in 3-4 days. The decoupage of the table is ready.

Decoupage from other materials

If the furniture is designed in a certain style, and there is an additional table available, decoupage can harmoniously solve this issue. For this, not only napkins and newspapers are suitable, but also other materials, multiple photos and videos of which can be viewed on the site.

Textile

Truly give new life to the decoupage of the old table with your own hands from the fabric. To do this, you need to thoroughly wash the countertop with soapy water, remove the old paint with a chisel (sometimes the table is so old that you have to remove the top layer with a planer) or a sharp knife and sand the countertop with sandpaper. Fill all cracks and pits with a spatula with acrylic putty. For long-term operation of the countertop, it must be impregnated with an antiseptic and coated with a primer, then apply paint in several layers.

Next, it is worth preparing the selected fabric by cutting it to the size of the product. For a round table in the Provence style with your own hands, you should measure the diameter, for a rectangular table, respectively, the length and width. Then cover the entire surface of the countertop with PVA glue and cover with a damp cloth. Carefully smooth the fabric with your hands from the center to the edges. Particular attention should be paid to ensure that the material does not wrinkle, and that every millimeter is tightly pressed against the tabletop. After that, the product should dry completely and then varnishing can begin. Decoupage of a round and rectangular old table with a cloth should be covered with acrylic varnish in aerosols or with a brush in several layers. After each coating, the product must be given time to dry completely. Even using a clear varnish, each subsequent layer will make the table a tone darker.

Wallpaper

A very original solution would be to do the decoupage of a coffee table with your own hands. Especially if its coloring will overlap with the coloring of the wallpaper. For all types of thick paper, the decoupage process remains standard, both for napkins and for textiles. If the paper is not too thick, it is recommended to use the first option, only with some amendments. The length of stay in the water of the cut wallpaper increases and is about 10 minutes. The process of separating the top layers of decoupage paper takes longer, and the final goal is the residual brightest thin layer, which is then glued to the surface. Provence-style table decoration can also be done in another way, when thick wallpaper paper is glued with PVA on the table top. In both cases, such an unusual approach will pleasantly surprise and amuse guests.

To perform the decoupage of the table, all kinds of materials can also be used at the discretion and imagination of the master. In addition to napkins and wallpaper, you can use newspapers, magazines, photographs, dry plants, guipure, colored scarves, and even eggshells. All these original finds will bring great pleasure from the production process and aesthetic pleasure from contemplation.

Furniture aging

The decoupage technique also includes the aging of objects, in particular furniture elements such as a table. To give it an antique look, it is enough to use craquelure varnish. To do this, it is necessary to prepare the table according to the standard method, soaking it with an antiseptic, covering it with a primer and paint, then apply craquelure. This substance, in the form of a varnish, cracks when dried and gives the product the appearance of wood that has aged over time. The effect of the paint wiped down to the metal base will be given by the potal applied along the edges of the table. But the simplest method of aging decoupage products is to sand some areas of the table surface with sandpaper.

Exclusive products can fully complement the furniture set of some styles. For example, decoupage of a table in the Provence style will bring a rustic atmosphere of home warmth and comfort, if combined with a furniture set and original wall decor. Also, a hand-made item will look appropriate in a country interior and will become a real pride of a talented hostess.

The surfaces of this table are specially worn and peeled - everything as required by the classic rustic Provence

Guipure

In order to make an openwork delicate table with a unique pattern with your own hands, you need to cut a piece of guipure to size and soak it in water for a while. Wash the table with soapy water, rinse thoroughly with running water and proceed to remove the paint (if any) with a planer, chisel or sharp knife. Then take sandpaper and carefully sand the surface. The next step is to paint the table in two layers with an interval for drying.

On the dried table, it is necessary to apply PVA glue and cover it with wet guipure. With the movement of hands from the center to the edges, firmly press the fabric to the surface of the table. It is very important to try to avoid bubbles and wrinkles by carefully pressing and releasing the remaining air that has formed between the table and the guipure. After complete drying, coat the surface with varnish in several layers, also leaving time intervals for drying. After 3-4 days, the finished guipure table will delight the household and guests with its beauty and novelty.

Leaves

A very original decision would be to update the countertop with decoupage using leaves. Leave them green or wait for autumn and collect a variety of all kinds of bright colors - this is a matter of taste of the master. So, the collected leaves should be smoothed with an iron through gauze or other thin cloth, carefully cut off the veins with a sharp knife or blade so that the leaf becomes thin and flat and proceed to prepare the table.

Prepare the surface in the standard way, select the desired background in the form of paint (for a wooden effect, you can use a transparent primer and stain in the right amount), let it dry, cover with PVA glue and spread out the leaves, carefully glue them to the table surface. Carefully ensure that air bubbles and wrinkles do not form between the leaves and the table, then leave to dry completely. At the last stage, it is traditional to varnish several times with drying intervals and leave for three to four days. The original table, reminiscent of the riot of foliage in the winter cold, is ready.

In a similar way, you can decorate the table with flowers and bird feathers. It should only be remembered that the raw material for decoration is as flat and thin as possible in order to avoid unnecessary tubercles.

Eggshell

The updated table made using the decoupage method using eggshells will look very impressive. Such a surface will resemble marble chips or marble itself. A dried table prepared, opened with a primer and paint, must be carefully smeared with PVA glue. Eggshells of various colors of natural shades should be crushed by pouring onto a hard surface, using a rolling pin or a glass bottle. The powder can be like powder, sand or small pebbles at the discretion of the master.

This shell must be sprinkled on the surface of the table in random order, allowed to dry and varnished several times. The number of openings should be determined by the master himself until the volume particles are completely smoothed and aligned with the top layer of varnish. In a few days the table will be ready for use. A very original idea would be to cover the table with a shell of painted Easter eggs. For Orthodox believers, this festive table will be a reminder of the Resurrection of the Lord and the triumph of good over evil.

For skillful hands and a sincere desire to acquire a unique table, there are a lot of all kinds of tips. A table made using the decoupage method with your own hands will allow you to embody the most daring idea, depicting it on the surface, endlessly admiring your creation and surprising your loved ones.

Video: a detailed master class on decorating a table using decoupage technique.

Categories

Popular