Kitchen sink cabinet: varieties, features and sizes. How to choose or make a convenient sink cabinet for the kitchen Corner kitchen sink cabinet dimensions

The corner sink and cabinet under it should be the most suitable for your kitchen: in size, shape and installation location. If you choose the model correctly, in this case it will be possible to create the most comfortable conditions for cooking and washing dishes. Even for a small kitchen in a studio apartment, you can find a suitable option. In our article, we will designate the main dimensions of different models and present a visual diagram of such a cabinet.

Round sink and cabinet under it (900x900 mm).

Two cabinets were combined into one, due to which there was a lot of storage space inside the module.

Types of corner sinks

invoice

This is a traditional type that is installed instead of a countertop. The size of the sink completely matches the standard cabinets. The kit includes not only a sink, but also special landing nests and platforms for installing a mixer.

One of the overlay design options is a model with a wide wing that fits into the main tabletop. Such a sink is quite massive, but it allows you to fill the entire corner with benefit.

The downside of this installation method is that water enters the space between adjacent modules, so the furniture is exposed to the damaging effects of moisture every day.

Mortise invoice

For installation in the tabletop, it is necessary to make a hole according to the dimensions of a particular model, while the edges of the product (edging or wing) come onto the surface of the table and it rises. It is important that the joints are well treated with sealant.


mortise

Such kitchen sinks do not rise above the countertop (sometimes they are even recessed deep into). Often the surface of the curbstone is made of artificial stone. This type of sink is the most expensive, and the installation method is the most time-consuming.

If the sink is fully embedded into the countertop, then there is no ledge. The seam along the perimeter of the sink must be securely sealed.

Italian kitchen sinks, by the way, are both overhead and mortise.

Dimensions and shape of shells

Basically, they install models of round, rectangular or square shapes. Less often choose semicircular or oval options.

Consider typical models:

  • Round - the most compact, their diameter varies from 400 to 500 mm;
  • Rectangular - suitable for rooms with an elongated shape or when the width of the headset is less than the standard 60 cm. Common dimensions: 400x500, 400x800, 550x500, 500x800, 500x1000, 500x1250 mm;
  • Square - choose for arranging small kitchens. The most common sizes: 400x400, 500x500, 600x600 mm.

Standard cabinet dimensions

The dimensions of the countertop for the sink module depend on the overall dimensions of the furniture and the area of ​​the room. Most often, the tabletop parameters are as follows: width - 500, 600 and 800, depth - 600 mm.

Standard dimensions(corner cabinets - square and rectangular bowls):

500x500 - 400x400, 500x500;

600x600 - 400x400, 400x500, 500x500, 550x500, 600x600;

500x900 - 400x400, 400x500, 400x800;

600x900 - 400x400, 400x500, 500x500, 500x800, 550x500;

600x1300 - 400x400, 400x500, 500x500, 500x800, 550x500, 500x1000, 500x1250.

If the size of the module and the sink are the same, then the overhead installation method is selected.

The main selection rules:

  • There should be an indent between the sides and the wall of the cabinet (total - from 5 cm or more). That is, for a module with a width of 600 mm, a model with a width (diameter) of no more than 550 mm (excluding the wing) is suitable;
  • There should be a distance of 5 cm or more between the sink and the front edge of the countertop, otherwise water will splash and your clothes will constantly get wet (unless this is an overhead option). However, do not install the bowl too far away from you - it will be inconvenient.

Due to their compact dimensions, round models can be installed in almost any standard module (taking into account the minimum total indent of 5 cm).

Dimensions of the corner module and the Alveus Cubo 80 (espresso) sink installed in it.

An important condition: the tabletop should protrude slightly relative to the facade, forming an overhang of 50-100 mm, otherwise water splashes will fall on the facade. Direct exposure to moisture has a detrimental effect on the safety of the material, so contact with water is best avoided.

Dimensions of a corner kitchen cabinet with a sink Longran Lotus LT 945.510 15.

Scheme of a corner kitchen cabinet.

Photo: fb.ru, inforico.com.ua, mydizajn.ru, strport.ru, santex24.ru, atlant-u.ru, masterpomebeli.ru, kitchensinteriors.ru, kuhni-zubr.ru

The kitchen is a place that is the heart of the house, and furniture plays the main role in the interior of this room. A properly selected corner cabinet for the kitchen is able to provide an original and functional design for the entire set.

Similar articles:

Functions of a corner cabinet in a kitchen set

Most often, a corner kitchen module is used as a place to install a sink. The floor L-shaped cabinet under the sink will help to remove unnecessary clutter and bring an element of innovative technologies into the interior of the room.

The corner kitchen cabinet is the most spacious place in the whole set. Its capacity is used to optimize the kitchen space.

If you equip a triangular cabinet with pull-out panels and baskets, then it will accommodate a lot of food, dishes and kitchen utensils. In addition, household appliances can be built into the cabinet in the corner.

If there is no need to use the space functionally, shelves with figurines, photographs and other decorative things are placed in the corner. And the souvenir in the box is better viewed if the doors in the cabinet are made of transparent glass.

Variety of designs

There are 3 main types of corner cabinets:

  1. Hanging cabinets that are placed on the wall. It can be a full-fledged locker with facades or sliding panels. It is used to store dishes. Sometimes the triangular module of the kitchen system performs a decorative function.
  2. Floor corner cabinets. Most often they mount a sink. In addition, a hob is built into the triangular cabinet. Then, instead of the upper corner cabinet, you will have to install a hood.
  3. One piece corner cabinet. Large and roomy cabinet for the kitchen, height from floor to ceiling. It is rarely installed due to its inconvenient location and too large size.

Basic dimensions - standards

Dimensions and dimensions of kitchen corner cabinets should be calculated taking into account the overall design and capacity of the entire room. When choosing a module, you should follow the main recommendations:

  • The thickness of the internal shelves is determined, taking into account the items that will be stored on them. If you plan to keep wooden, plastic or ceramic dishes in the cabinet, a shelf thickness of up to 20 mm is sufficient. If the cabinet is intended for storing heavier items, such as cast iron pans or pots, the thickness of the panels should be 2 cm or more. This rule applies to standard partitions made of plastic or chipboard.
  • When calculating the dimensions of the cabinets, it is taken into account that the depth of the hanging cabinets does not exceed 40 cm. When planning the design parameters, plumbing communications and ventilation should be taken into account if they pass through a triangular module. The upper corner cabinet is equipped with lighting, which affects the calculation of its dimensions.

  • If you plan to build a stove into the closet in the corner of the kitchen, then you should not hang the upper tier too low, especially if plastic or other combustible materials are used in the furniture design. Above the stove or above the sink should be spacious enough to conveniently and efficiently use the work area.
  • When choosing any furniture for the kitchen, it is necessary to take into account the growth of the hostess, since she will have to use the headset most often.

Standard kitchen dimensions:

  1. Upper corner cabinet - 60x60 cm with a front width of 42 cm.
  2. Lower corner cabinet - 90x90 cm with a depth of lower cabinets 55 cm and a tabletop width of 60 cm.

If a cabinet with parameters different from the standard is required, the dimensions are selected individually.

Manufacturing materials

Floor and hinged corner cabinets are made of the same materials as the rest of the furniture in the set. The frame of the module is made of chipboard, and the facades are made of laminated chipboard, wood or MDF.

For the manufacture of a corner cabinet with a tabletop, in addition to other materials, you will need a slab of artificial stone.

Internal filling

Inside the floor stand, you can mark a microwave oven or a dishwasher. Kitchen cabinets-tables are best filled with shelves for food storage. For more convenient storage of utensils and products, sliding racks on special clips are installed in a triangular cabinet.

If a sink is installed in a corner cabinet, most of the internal usable space is occupied by pipes. In this case, a trash can is placed in the locker. This is the best use of the cabinet under the sink.

A sink with a cabinet for the kitchen is an ageless classic that, despite great competition, is in no hurry to give way to the fashion trends of our time.

Such a sink can be a stand-alone piece of furniture or be part of a set. Separate models are suitable for owners of inexpensive prefabricated kitchen furniture sets, compact kitchens or country houses, in which, as a rule, it is not customary to install standard kitchen sets.

Varieties of sinks with bedside tables

According to the type of installation of the sink, there are two options:

  • Overhead

With it, the sink is simply superimposed on the curbstone corresponding to its size. This is a simple, budget and convenient option. And if you need to bring communications, the invoice sink can be easily removed from the pedestal.

  • Mortise

Now this is the most popular type of installation of sinks in apartments. The mortise sink is placed in a hole previously prepared on the countertop. This installation option makes it possible to choose a sink of absolutely any shape or design.

In addition, sinks are single or double. The second type is more convenient, because you can wash the dishes and defrost the fish at the same time.

As for the shapes, modern overhead sinks with cabinets for kitchens can only be square or rectangular, in contrast to the mortise options, whose variety never ceases to amaze. However, it is rectangular models that are considered the standard of practicality, since they are more spacious and, accordingly, functional.

Straight or angled?

The bedside table for the kitchen sink can be either straight or angular. Each of these types has its own specific properties.

Straight pedestal

  • Usually this type is equated with the number of traditional lockers, with standard equipment.
  • Functionality. As a rule, designers supply such furniture with various gadgets for ease of use. The most common of them are shelves, the placement of which directly depends on the method of supplying communication systems.
  • Practicality and ease of use are achieved thanks to the possibility of unhindered access to such a sink.
  • Reliability. The straight bedside table under the sink is resistant to all sorts of influences of an aggressive environment. The most durable are cabinets made of oak or beech.

Note. MDF will serve as a worthy analogue of natural wood.

Corner cabinet

  • There are 2 types of corner sink cabinets: 1) L-shaped; 2) trapezoidal. The first, due to its simplicity, is traditionally in great demand. And the second is a great option for a complex configuration sink.
  • Functionality. The corner cabinet is more ergonomic than the straight one.
  • Practicality and convenience. When you open the door of the L-shaped bedside table, the entire internal area is completely visible, therefore the necessary items are quickly found. A trapezoidal model is designed for a variant with two or more bowls.
  • Reliability depends on the base material. However, a corner cabinet is more prone to breakage than a straight one. The reason is the location.

Optimal dimensions

A medium-sized modern cabinet for a kitchen sink will allow you to hide communications, hide a household bucket, and even make compartments for household chemicals.

As a rule, a standard cabinet has a fixed size - 60 cm.

If you managed to buy a sink with a size of 0.5 m, it is recommended to choose an L-shaped corner cabinet for it. So you can save space in a small work area. For spacious kitchens, a variety of types of cabinets are suitable.

materials

Today, sinks can be made from a variety of materials. The most popular and budget option is a sink with a stainless steel bedside table. It perfectly withstands temperature fluctuations, chemical influences and shocks. This material, in fact, is eternal, the main thing is to provide it with proper care.

Also in the apartments of Russians you can often find sinks made of high-quality artificial stone. Such models look very aesthetically pleasing, modern and stylish. They also easily endure various kinds of tests: both shocks, and exposure to boiling water, and the influence of cleaning products. However, unfortunately, these sinks have one small drawback - a rather impressive weight. Accordingly, the cabinet under them must be very durable and reliable.

In addition, sinks are made from ceramics, natural stone, and non-ferrous metals. However, these options are quite expensive and do not differ in strength.

Choosing a good design

Single sinks are perfect for small kitchens

Single sinks are the simplest option. They are especially appropriate in compact kitchens, the dimensions of which do not allow the installation of double models. However, if the size of the kitchen is very impressive, you should give preference to more functional double sinks.

Often in stores, a bedside table for a sink is included. This is extremely convenient, because when buying a sink separately, it is sometimes difficult to find a suitable cabinet in the future. Why do you even need a sink cabinet?

The main functions of the cabinet under the sink

  • Cabinets for kitchen sinks usually hide various plumbing communications. Of course, they do not carry anything aesthetic. Because the curbstone perfectly hides everything superfluous in itself, which can spoil the overall look of the kitchen.
  • Any bedside table under the sink is a cabinet with a door, therefore, in addition to pipes, it often has to be a repository for a wide variety of household items. For example, many have a trash can, the necessary detergents or a dustpan with a broom. This is extremely convenient.
  • The main purpose of the nightstand is to hold the sink, so it needs to be reliable, durable and very stable. And it’s good if the cabinet with the sink is sold as a set. This is not only convenient, but also rational: the manufacturer has already thought through all the details of further operation and selected the optimal material and design of the nightstand.

Actually, the cabinets for sinks are now made from laminated chipboard. And the abundance of colors presented today allows you to choose a cabinet that favorably emphasizes the overall kitchen ensemble.

What is usually the problem with buying the right vanity unit? Everything is extremely simple here. Since the modern plumbing market is ready to offer customers a huge selection of various sinks, it is not always easy to find the right bedside table. It was then that the rational decision would be to make this important piece of furniture with your own hands.

Firstly, this way you can save a lot; secondly, the bedside table will be absolutely exclusive; thirdly, you don’t have to worry about the conformity of the sizes of the sink and the bedside table, as well as worrying about the lack of the desired shade (or material).

Convenient and functional cabinet with a sink there is a place in any kitchen. This is something that no work area can do without. Therefore, it is necessary that it succinctly fit into the kitchen interior, was pleasing to the eye and never ceased to amaze the owners with its ideal performance qualities.

Video instruction for installing a flush-mounted sink

Each owner strives to make it look cozy and beautiful, but at the same time be functional and comfortable. An important role in the design of a comfortable kitchen is played by furniture, in particular, a corner cabinet for a sink.

Benefits of a corner kitchen sink cabinet

The main advantage of a corner kitchen sink with cabinet is the rational use of free space. After all, most of our kitchens are small. And the installation, consisting of two adjacent parts, between which there is a cabinet with a sink in the corner, is the best option for such a room.

Most often, in the corner of the kitchen there is an input of all pipes: hot and cold water, sewage. Therefore, it is here that it is most convenient to install a cabinet with a sink. In this case, the sink will be in the center of the entire kitchen set, and this will contribute to the convenience of the hostess during cooking.

The simplest is the L-shaped corner cabinet for the sink. By opening the narrow door, you can easily and quickly get the necessary item inside.

But a trapezoid-shaped sink cabinet is considered especially convenient. Its large internal volume will allow you to place a dishwasher or household water filters inside. Use such a cabinet under the sink to store various cleaning and detergents, a trash can. Sometimes even a washing machine is installed inside such a cabinet.

The trapezoidal cabinet for the sink can be equipped with convenient drawers that slide out when the door is opened. In such compartments you can store voluminous and heavy dishes.

In addition, in modern models of corner cabinets, you can install an organic waste shredder or special sorting compartments for garbage: broken glass, plastic and paper. And in the farthest corner of a capacious pedestal, a water heater can be mounted.

Fitting © 2022 Design and interior of apartments