Effective ways to clean the bath from yellowness. How to remove stubborn stains in the bath How to wash the sink in the bathroom from yellowness

Everyone has to deal with the problem of the appearance of yellowness on the surface of the bath. Plumbing that has changed color looks unaesthetic and spoils the interior. You can learn how to clean the bath from yellowness from this article.

The appearance of a yellow coating on the enamel coating is provoked by chemical impurities contained in tap water. Water flows through old pipes, which can ruin any high-tech material. Fungus and mold are also the cause of the appearance of plaque on the surface of the bath. Yellow spots usually appear around the drain or in places where there is constantly water, such as under a soap dish.

To return the bath to a snow-white color and restore the enamel coating, it is necessary to periodically clean it from yellowness. The sooner you start to deal with yellow spots, the easier it will be to get rid of them. If you do not know how to wash a yellowed bath, choose cleaning methods depending on the material from which it is made.

Important: Not always the usual household chemicals will help you get rid of yellow stains, some of them can lead to serious damage to the bath. Modern products contain aggressive chemical compounds that, if used incorrectly, can permanently ruin the top coating of the bath.

Choosing a tool

To clean the enamel coating from yellow plaque, you can use not only expensive products, but also the most common products. If you do not know how to clean the bath from yellowness, follow the proven recipes.

Baking soda

If you do not know how to clean a yellow bath, use soda. It is an all-purpose cleaner and is used for effective and safe whitening. The product does not contain harmful substances and does not harm the coating. This is the easiest way to get rid of the yellowness, it will work for newly appeared stains, but it will take some effort to perform such a cleaning. Remember to protect your hands with rubber gloves before work.

Apply the product to a damp surface and leave for a while.
Periodically moisten the composition with water, after an hour rinse the bath with a sponge with a hard surface and rinse everything with warm water.
Small soda crystals can scratch the surface when machining, so try to keep an eye on the enamel coating during the cleaning process. If you are concerned about damaging the bathtub coating, try this method on a small area of the surface.

Baking soda and hydrogen peroxide

This method is suitable for cleaning acrylic bathtubs.

It is necessary to prepare a mixture consisting of one part of hydrogen peroxide and two parts of soda.
The resulting paste is carefully placed on the contaminated areas and left for an hour.
When you wash the dried paste with water, you will not find yellow spots. Instead of soda, you can add vinegar.

Lemon acid

If you do not know how to wash the bath from yellowness, this method will help you cope with any plaque. This folk remedy has excellent cleaning properties and is used to remove scale in the kettle.

Important: Before work, do not forget to protect your hands with rubber gloves.

Dissolve the powder sachet in a glass of water. Instead of citric acid, you can use regular bleach.
The selected product is applied to the yellow areas with a damp sponge. This process must be repeated several times within two hours, maintaining constant ventilation in the bathroom.
After completing the entire procedure, wash the bath with warm water.

Dry bleach

If you do not know how to remove yellowness from the bath, use a simple remedy. The bleach is mixed in equal proportions with water to obtain a thick composition, which is applied to contaminated areas. When the mixture dries, wash it off with cold water. Never use chlorine bleach as the chlorine can have a negative effect on the surface of the tub. Only modern cast-iron bathtubs are not afraid of such external influences.

Hydrogen peroxide and ammonia

If you do not know how to wash a yellow bath, these well-known pharmacy products will become indispensable helpers in the fight against yellowness. First you need to wash and wipe dry a small glass container.

Remember to wear rubber gloves before handling chemicals.
Next, mix ammonia and hydrogen peroxide in a ratio of two to one.
We process contaminated areas with a sponge moistened with a solution. Leave the bath for 15 minutes, then rinse everything with running water.

Table salt and wine vinegar

If you don’t know how to wash the yellowness in the bathroom, use regular salt and vinegar to remove old stains at home. Vinegar is the most dangerous cleaning agent, so it should be used very carefully.

Tip: If you're concerned about damaging the bathtub finish, try this method on a small area of the surface.

To prepare a solution, mix half a cup of vinegar with two tablespoons of salt.
The resulting composition is slightly heated, but not brought to a boil. We treat contaminated areas with a heated solution.
Leave the bath for 20 minutes, then rinse everything with running water.

Vinegar for cleaning the bath can be used separately. In this case, it is necessary to moisten the contaminated areas abundantly with vinegar and leave for a day. This time is necessary for the acetic acid to react with the yellowness. After that, the consequences of pollution can be easily removed with a sponge.

Conclusion

Do not forget that metal brushes should not be used to clean bathtubs. It is also necessary to avoid sudden changes in temperature, which can lead to the appearance of small cracks on the surface of the bath.

Housewives are faced with the problem of how to clean the bath from yellowness at home and how to restore whiteness to it. The source of the problem is tap water, which contains mineral salts and microorganisms. They get on the surface of the bath, eat into it and eventually form a yellow coating. To remove this plaque, especially an old one, sometimes seems like an impossible task.

Means for cleaning cast-iron bathtubs from yellowness

The enamel of cast iron bathtubs is strong and reliable, but when cleaning it, it is not recommended to use abrasives and cleaning products containing acid. The latter can lead to micro-cracking of the bathtub enamel. Toilet cleaners are not suitable for cleaning bathtubs, as they damage the enamel.

Means for cleaning cast-iron bathtubs can be divided into two large groups - folk remedies and household chemicals. Folk remedies include:

drinking soda;
citric acid;
table vinegar;
soda ash;
bleach;
ammonia.

These funds can be combined, which gives the best effect. Below are the basic tips for cleaning a cast iron bath from yellowness.

Cleansing with baking soda. Baking soda is sold in grocery stores and can be used to clean both minor and more intense stains. To do this, you need from a quarter to a whole pack of soda. Pour soda on a damp sponge with a soft abrasive coating, sprinkle with water on top so that the soda looks like a thick slurry, and start scrubbing the contaminated places. The procedure must be repeated several times until the yellowness is cleared. In case of severe contamination, you will have to repeat the procedure several times.
Cleansing with table vinegar 9%. Fill the bath with warm water, dissolve a half-liter bottle of table vinegar in it and leave it to soak for half a day. Then drain the water and wipe the tub with a soft cloth.
Drinking soda and table 9% vinegar. For heavily soiled surfaces (especially old enamels), it is recommended to use table vinegar in addition to soda. Pour vinegar onto a sponge with a soft abrasive coating and carefully wipe the contaminated area. After that, pour soda on the same sponge, slightly moisten it (sprinkle) with water and continue cleaning the enamel.
Bath cleaning with soda ash. To clean stubborn dirt, you will have to buy soda ash at the hardware store. When working with it, be sure to wear gloves. Cleansing is done in the same way as cleaning with ordinary baking soda: pour it on a sponge, moisten and wipe dirty areas.
Cleansing with citric acid. Dilute 15-20 g of citric acid in a glass of water, thoroughly wipe the bath with the resulting solution. The second option: fill the bath with warm water, dissolve 300 g of citric acid in it and leave for half a day. Then wipe with a sponge or damp cloth.
Bath cleaning mix - baking soda, soda ash, vinegar, dry bleach. You can prepare a mixture of soda ash and baking soda (2-3 tablespoons each), slightly moisten it and rub the moistened surface of the bath. After 15 minutes, prepare a mixture of bleach (3 tablespoons) and table vinegar (0.25 cups), rub it over soda and leave for another half hour.
Bath cleaning mixture - soda ash, laundry soap, ammonia. Soak half a piece of laundry soap in 0.5 liters. water for 12 hours. After its dissolution and the formation of a jelly-like mass, mix 3 tablespoons of soap and 3 tablespoons of soda ash. Add 5 drops of ammonia. Rub the bath with the resulting mixture and leave for an hour or an hour and a half. Then rinse with warm water, removing the remaining dirt with a sponge.
Cleaning strong yellowness with Sanitary powder. A very effective tool, but at the same time, it has a bad effect on enamel. It can only be used for old bathtubs that are planned to be replaced. The bath is moistened, the “Sanitary” powder is scattered over its surface, it is also moistened, rubbed along the walls and bottom of the bath and then covered with a damp cloth. After 20 minutes, the powder is rubbed again, and the yellowness from the bath will begin to disappear. You can only work with gloves.

Features of cleaning acrylic bathtubs from yellow plaque

Acrylic bathtubs are very demanding in the care of their surface, as it is easily exposed to mechanical and chemical stress. Do not put heavy objects in the acrylic bath that can damage it. The use of synthetic powders and prolonged contact with them lead to yellowing of the acrylic bath.

When cleaning from yellowness, it is necessary to use soft sponges, rags, and it is better to refuse brushes, even soft ones.

Baking soda for cleaning acrylic baths. Soda (2-3 tablespoons) is thoroughly dissolved in water, after which yellow spots are rubbed off with the resulting solution. Do not use sponges with an abrasive layer!
Lemon acid. Dissolve a bag of citric acid weighing 10 or 15 grams in water so that not a single crystal remains. After that, rinse the contaminated areas and leave for 20 minutes. After that, repeat the procedure and rinse the surface of the bath with running water.
Table vinegar 9%. Moisten a soft cloth or sponge without an abrasive layer with vinegar (9%) and wipe the bath.
Liquid laundry soap. Soak a piece of economic world (200 g) in hot water for several hours. After softening, mix everything, apply to a rag or soft sponge and wash off the yellow coating.
Liquid dishwashing detergent, special products for washing acrylic bathtubs. The agent must be applied to a soft cloth and treated with a bath, leaving it to soak for 10-15 minutes with this agent. Then rinse thoroughly with water with a soft sponge.

Cleaning of steel baths

Cleaning of the yellowness of bathtubs made of steel is carried out in specific ways, some of them are similar to the methods of cleaning cast iron bathtubs:

use of cleaning creams and gels according to the instructions on the packages;
using a mixture of ammonia (2 parts) and hydrogen peroxide (1 part) for treatment (apply for 20 minutes, then wash with soapy water, wipe);
removal of yellowness with powder bleaches; a paste is made from them (dissolve them in water as 1: 1), cover the contaminated area with it, wait until it dries, and rinse with warm water.

Basic principles of bathroom care

The most important principle when caring for a bathroom: the appearance of a yellow coating on its surface is easier to prevent than to clean it later. Therefore, to prevent the appearance of yellowness, you must follow the basic tips:

After each use of the bath, be sure to rinse it and dry it (you can wipe it with an absorbent towel).
Rinsing and drying the bath daily is a must.
Wash the bathtub weekly with laundry soap, baking soda or special bath cleaners. After that, rinse it (first with hot, and then with cold water) and dry it.
When cleaning the tub, use soft brushes or sponges with a soft cleaning surface on one side.
Do not allow water from the spout or shower to constantly drip or run into the tub while using the sink.
Provide adequate airflow to the bathroom.
Do not soak laundry in an acrylic bath.
Do not use acid and chlorine bath cleaners or abrasives.

August 23, 2016
Specialization: facade finishing, interior finishing, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

Sooner or later, even the most snow-white bath from constant contact with water is covered with a yellow coating, which gives the hostess a lot of headaches. The fact is that rust literally eats into the surface of plumbing, as a result of which it is quite difficult to deal with it without theoretical preparation. Therefore, in this article, I decided to tell you how and how to clean the bath from plaque quickly and effortlessly.

Folk compositions for cleaning the bath from yellow plaque

Currently, in household chemical stores there is a huge selection of all kinds of detergents and cleaning products that allow you to cope with any kind of plaque and other contaminants. However, as a rule, they contain abrasive additives that scratch the surface of the bath, or toxic acids. In addition, the price of quality compounds is quite high.

Therefore, do not rush to run to the household chemicals store - there are no less effective, but at the same time safe folk cleaning products that can be prepared from "improvised" ingredients available in the kitchen of every housewife.

These funds include:

Below I will tell you how to whiten a bath from yellowness in all these ways.

Remedy 1: baking soda with vinegar

If you are looking for a way to clean a cast-iron bath from yellowness, then try using baking soda with vinegar. For this you will need:

soda ash;
baking soda;
vinegar;
bleach.

To clean the bath, follow these steps:

start work with the preparation of the first portion of the composition. To do this, mix soda ash and baking soda (2 tablespoons each);
then add a small amount of water to the soda. The result should be a mushy consistency;
rub the wet surface of the bath with the resulting composition and leave for fifteen minutes;
next you need to mix a quarter cup of bleach with a quarter cup of vinegar;
apply the resulting surface to the surface treated with soda and wait 30 minutes;
after half an hour, wipe the surface with a sponge and rinse with plenty of water.

Remedy 2: soda ash with laundry soap

Another effective cleaner for enameled cast iron and metal bathtubs is soda ash with laundry soap. To use it, before cleaning the cast-iron bath, rub laundry soap and mix with soda ash in a one-to-one ratio.

If the surface of the bath is in a neglected state, add a small amount of ammonia to the mixture.

The resulting mixture should be slightly moistened and applied to the contaminated surface for about an hour. After this time, wipe the treated area with a sponge and rinse with water.

Remedy 3: ammonia with hydrogen peroxide

Ammonia with hydrogen peroxide are old "grandmother's remedies" that have been tested for decades. To get rid of yellow plaque with their help, you need to follow these steps:

mix 100 ml of ammonia and 50 ml of hydrogen peroxide;
treat all contaminated areas with the resulting solution and leave them for 15 minutes;
after the specified time, rinse the contaminated areas with water;
if necessary, the procedure must be repeated.

Ammonia has a pungent toxic odor. Therefore, when working with it, use personal protective equipment, and also ensure high-quality ventilation of the room.

Remedy 4: Wipes soaked in vinegar

Now I will tell you how to wash an acrylic bath from yellowness. As you know, this plumbing requires a more careful attitude than metal counterparts.

If the bathtub is relatively new and not heavily soiled, then simply soak the wipes in vinegar and cover the soiled areas of the bathtub with them. After an hour, the napkins should be removed and then wipe the surface of the bath with a soft sponge.

Remedy 5: Citric Acid

Many housewives do not think about how to clean the acrylic bath from yellowness, and when they see a yellow coating, they immediately take up citric acid, as this is a very effective remedy. To clean the rust from the bath with it, you must perform the following steps:

draw warm water into the bath;
then add one and a half to two tablespoons of citric acid to the water;
leave the bath for 12 hours;
after the specified time, drain the water and rinse the bath with clean water;

To neutralize the acid after such a treatment, wipe the bath with a solution of soda and then rinse. This will prevent corrosion of the top layer of plumbing.

Remedy 6: Trisodium Phosphate and Hydrogen Peroxide

Trisodium phosphate is a common cleaning agent that is familiar to many housewives. You can buy it in almost any household chemical store. Combined with hydrogen peroxide, it works great on rust.

Instructions for using this tool are as follows:

First of all, trisodium phosphate must be diluted in water. To do this, draw water into a three-liter jar and then add four tablespoons of this product there;
when trisodium phosphate is completely dissolved, 50 ml of hydrogen peroxide should be gradually poured into the liquid;
in the resulting solution, you need to moisten the sponge and rub the contaminated area with it;
if the stain has not completely disappeared, apply the composition on it and leave for 10 minutes;
then the treated area must be washed with plenty of water.

As a rule, rust disappears after the first time. However, if necessary, you can repeat the procedure.

Remedy 7: Oxalic Acid

Another simple yet very effective remedy is oxalic acid. It can also be used to clean an acrylic bathtub.

before cleaning the acrylic bath, dilute the acid in a ratio of one to ten;
apply the solution to the yellowed area and stop working for three hours;
after that, moisten the sponge in warm water and wipe the treated area with it.

Remedy 8: Cleaning Powder Paste

If you have started the surface of a cast-iron or bathtub, you can clean it with a do-it-yourself paste. To prepare it, you will need the following ingredients:

This tool is used as follows:

mix all the ingredients in any order;
apply the resulting paste on a rusty stain and leave for half an hour;
then rinse off the paste with running water.

Remedy 9: Borax and Lemon Juice

Borax and lemon juice are a versatile tool that can be used to clean both enamel and acrylic bathtubs. Instructions for its use are as follows:

mix borax with lemon juice to get a paste-like consistency;
before cleaning the acrylic bath, moisten the yellow stains with water;
apply the resulting composition to the rusted area with a soft cloth;
then wait until the paste dries;
now the paste needs to be washed off with water along with rust;
if necessary, repeat the procedure again.

Remedy 10: table salt with wine vinegar

If you need to remove old, stubborn rusty stains, you can use table salt and vinegar. This tool is used as follows:

pour 100 ml of vinegar into a container and add a tablespoon of table salt to it;
the resulting solution must be heated to a temperature of 60-65 degrees;
using a sponge, apply the heated solution to the contaminated areas;
after 20 minutes, wash off the solution along with the rust with running water.

Here, in fact, is all the information on how and with what to clean the bath from yellowness.

Conclusion

All of the above tools are quite effective, allowing you to return the bath to its original attractive appearance. So make your choice depending on what ingredients you have on hand. The only thing is, do not use compositions for an acrylic bath that are designed to clean an enameled surface.

For more information, see the video in this article. If you have any questions regarding the use of bath rust cleaners, ask them in the comments, and I will be happy to answer you.

August 23, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

Practical and durable acrylic bathtubs are often installed in modern apartments, but the polymer quickly loses its appearance with improper care. To maintain a sparkling whiteness and prevent cracks and scratches, you need to properly care for your acrylic bathtub.

Advantages

Caring for modern plumbing is different from the usual washing of cast-iron and metal bathtubs. With a careful attitude, acrylic products delight their owners for at least three decades. They compare favorably with old bulky bathtubs with lightness, a variety of models, a sparkling white coating, the ability to retain heat for a long time, corrosion resistance, and the absence of mold and fungus.

Care

Acrylic can be scratched while bathing pets. Metal buckets and basins, hard brushes and washcloths will damage the polished surface. The use of detergents with abrasives and chlorine also adversely affects the quality of the acrylic coating: it becomes dull, loses its attractive sheen.

Attempts to wash the bath with gels containing solvents and ammonia will result in damage to the top layer: at first it will become cloudy, and with frequent and prolonged contact with these substances it will deform.

The capricious polymer does not even tolerate soaking laundry. Powder, stain removers used in washing are harmful to a fragile snow-white bath. Microcracks resulting from improper operation and maintenance are not only unaesthetic, but also contribute to the further destruction of the bath coating. Plastic does not tolerate exposure to high temperatures.

Cleaning products

In order for the bathtub covered with acrylic to remain snow-white, it is necessary to clean it properly every day, not to neglect the prevention of pollution. The smooth surface of the polymer does not absorb dirt, so it is enough to wash it with a soft sponge with soap and rinse under running water. So that drops of water, drying, do not leave marks, you need to wipe the coating with a dry cloth. If there was no time for these simple actions, and yellowness and limescale still appeared on the surface of the bathtub, you should use products designed specifically for cleaning acrylic bathtubs. The quality of funds from well-known manufacturers is beyond doubt:

"Ravak" - a line of products designed for cleaning, disinfection, elimination of especially strong pollution, restoration of the protection layer.
"Acrilan", gently acting on the surface, removes soap and limescale, rust and mold, and also forms a protective film, giving extra shine.

"Tim Profi" copes well even with old pollution, restores shine and radiance, fights unpleasant odors. In addition, it is necessary for the care of a hydromassage bath. In order for the mechanism to work for a long time, it must be cleaned in a timely and high-quality manner.

Bass effectively cleans acrylic bathtubs and showers.
Cif universal cream is also suitable for cleaning acrylic products. With it, you can get rid of yellow plaque, and rust, and lime deposits.
"Acryl Polish" - a line of products for the care, repair and polishing of acrylic coatings.
"Mr. Cleaner" is a wonderful budget option that not only copes with various kinds of pollution and effectively fights bacteria, but also protects the top layer of the bath from fungus. It coats the surface, thereby preventing dirt from accumulating on the acrylic. After applying "Mr. Chistera", the bath will remain snow-white for a long time and retain its shine.
Bon Professional has similar properties. It also forms a special film that prevents dirt from settling on the tub.

Liquid detergents are applied with a soft sponge, sprays are sprayed onto the surface of the bath. After a certain period of time specified in the instructions for use (usually from 5 to 20 minutes), the product is washed off with water. Some gels and liquids for washing acrylic bathtubs can also be used to disinfect them (for example, Team Pro, Ravak Desinfectant). After filling the bath with water and adding a disinfectant, you need to wait about 10 minutes, then drain the water, rinse the bowl thoroughly.

For daily cleaning, ordinary dishwashing gel is quite suitable, and old limescale will have to be dealt with with the help of gels and creams specially designed for this purpose: Sanfor, Gel WC 5+, Ravak Turbocleaner.

Folk remedies

To wash an acrylic bath at home, some folk methods will help:

An indispensable assistant in removing limescale is citric acid. The bath should be filled with hot water, add a couple of bags of this product. After a few hours, rinse the acrylic surface with running water, wipe with a soft cloth. Cleaning with citric acid should not be repeated often, 1-2 times a year is enough.
To remove stains from acrylic, ordinary toothpaste with a whitening effect is able to.
A mixture of ammonia and hydrogen peroxide helps get rid of yellowness.

A slurry of soda and water can clean off rusty spots. It is enough to apply it to the pollution, then gently rinse. Keep in mind that rubbing the surface of this polymer is strictly prohibited.

Table vinegar copes with many types of pollution. 1 liter of the product is poured into a bath filled with warm water. In the morning, it is thoroughly washed with a soft sponge, rinsed under running water and wiped dry.
If a solid layer of limescale and water stone has formed on the surface of the bath, then a slurry of washing powder, water, 2 tablespoons of Whiteness and a tablespoon of vinegar will help remove it. Apply the composition for 20 minutes, then wash the surface with a soft cloth or sponge, pressing lightly. At the end of the cleaning, the area to be cleaned must be thoroughly rinsed under running water.

Cleaning after repair

Sometimes the need to wipe stains from plastic arises immediately after the installation of plumbing or after repairs in the bathroom. To wipe off the sealant, you need efficiency. Until it hardens, it can be removed with a rag and washed with a detergent. If the silicone layer has already hardened, it is better to give up trying to remove it with all sorts of solvents and acetone dangerous for acrylic.

Dried sealant must be removed mechanically very carefully: with a blade, clerical or construction knife.

Removing the primer from the polymer surface is also not easy, especially without the help of chemicals harmful to it, such as white spirit and acetone. One option is to try to remove the stain mechanically, after softening it. Hot water is poured into the bath, drained after a quarter of an hour. This procedure must be repeated several times. As a result, the primer softens a little, and you can try to rub it off with a blade or a clerical knife.

Even the most tidy housewife in the bathroom eventually gets dirty. The most puzzling question is how to clean the bath from yellow plaque. Detergent residues and dirt are usually removed without much effort. But yellow spots of rust and lime deposits are thoroughly eaten into the snow-white surface. Attempts to remove them by aggressive means do not give the desired result. Often, after such cleansing, the surface of the bath loses its luster and smoothness. Its fragile coating is destroyed.

1

A few decades ago, under the bathroom, every housewife had a box of soda ash. It was the main tool for cleaning plumbing, tiles and dishes. Soda ash differs from baking soda in higher alkaline activity. It removes dirt much more effectively and can cope with even the most persistent of them.

A solution of soda ash will help remove yellow stains. It is prepared from 1 liter of water and 2-3 tbsp. l. soda. The solution is applied to the sponge and wipe the walls of the bathroom with it. If the stain is old and deeply ingrained, it is necessary to pour a solution on it and leave it to act. After half an hour, the surface is rinsed with running water and wiped dry. If the stain is on a vertical wall and it is not possible to pour a solution on it, use a cotton cloth. It is folded in several layers, impregnated with a solution and placed on the contaminated area without squeezing. After half an hour, the "compress" is removed and the remnants of the solution are washed off along with the dirt.

Bath cleaning with soda ash

Multilayer stains that have accumulated over a long time of operation will help remove the product from vinegar, bleach, soda ash and baking soda.

First, mix 2 tbsp. l. baking soda with 2 tbsp. l. soda ash. A little water is added to the mixture and applied to the surface of the bath with rubbing movements.

While soda penetrates the layers of dirt, 50 g of any bleach and 50 ml of table vinegar (9%) are combined in a separate container. 10 minutes after the application of the first composition, the surface of the bath is covered with the prepared mixture of bleach and vinegar. After the interaction of alkali and acid, a violent reaction will begin, accompanied by active foaming. The layers of dirt will collapse from the inside, separating from the walls of the plumbing. Cleaning agent and dirt residues are removed with running water.

Bath cleaning with soda ash

The cast-iron bath is well cleaned with soda ash and laundry soap. A bar of brown soap is grated and the resulting mass is mixed with soda ash in equal proportions. The mixture is slightly moistened with water and applied to plumbing for 1 hour. After that, the surface is rinsed with water.

2 Removing rust stains with ammonia

To prepare the cleanser, you need to prepare a glass container. A 0.5 liter jar will do. It should be washed well and dried with a clean cotton cloth or paper towels.

100 ml of ammonia is poured into the vessel, then 50 ml of hydrogen peroxide are added to it in a thin stream. The jar is closed with a plastic lid and its contents are shaken.

Removing rust stains with ammonia

Wet the sponge with the prepared solution and wipe the contaminated places with it. After 10-15 minutes, the composition is washed off with running water along with impurities. If it was not possible to completely remove the yellow spots, the procedure is repeated.

3 Cleaning plumbing with vinegar and citric acid

Table vinegar is able to clean the surface of the bath from dirt. It is diluted with water in a ratio of 1:2. A nylon sponge is dipped into the solution and the yellow coating is removed with it. Rinse the surface after 15 minutes. Large old stains are wiped with undiluted vinegar. You can put on them a cloth folded in several layers soaked in vinegar. It is desirable to press it to the surface. The tissue is removed and the bath is rinsed after half an hour.

Cleaning plumbing with vinegar and citric acid

Instead of vinegar, you can use fresh lemon juice or a solution of citric acid. Yellow plaque is rubbed with the pulp of a lemon cut in half or fruit juice is poured onto it. A solution is prepared from citric acid powder (1 tsp of the substance is mixed with 2 tsp of water) and applied to the stain. Citric acid is washed off the surface of the bath with running water after 15 minutes.

To remove more persistent contaminants, an effective remedy of vinegar and citric acid is used. The ingredients enhance each other's action. Before preparing the product, the vinegar must be heated. It is poured into refractory glassware and heated in a microwave oven or on a gas burner to +50...+65°C. A sachet of citric acid (20 g) is poured into a glass of hot vinegar, the liquid is stirred and applied with a piece of cotton cloth to the walls of plumbing. The composition is washed off after 10-15 minutes with running water.

A yellow plaque remover is prepared from wine vinegar (9%) and table salt. 100 ml of vinegar is poured into a refractory dish. There also fall asleep 2 tbsp. l. table salt. The vessel with the liquid is placed in a microwave oven and the temperature is set to 65°C. When the product is heated, it is taken out of the microwave. The cotton cloth is folded in several layers, dipped in a hot solution and the contaminated areas on the plumbing are wiped with it.

The product is left on the walls of the bath for half an hour. Then it is washed off with warm running water along with impurities.

An acrylic bath is filled with water and 2 liters of apple cider vinegar or a solution of citric acid (7%) are added to it. The water is mixed and left for 12 hours. After draining the cleaning solution, the bath is rinsed with clean water.

4 Other ways to clean plumbing

Salt will remove the rust stain. It is diluted with water to the consistency of gruel and evenly applied to the contamination. After 15-20 minutes, the treated area should be gently wiped with a sponge and rinsed with water.

If turpentine is used instead of water, the effectiveness of the procedure will be higher. The mixture is prepared from 200 g of salt and 70 ml of turpentine.

A mixture of dry mustard and baking soda will clean the surface of plumbing well. The ingredients are mixed in a ratio of 3:1 and diluted with water. The mixture should become like a paste. The agent is applied to the yellow plaque and after 15 minutes the dirt is cleaned. Then rinse the walls of the bath with running water.

Cleaning plumbing from yellow plaque

White bathtub will return a shining shine bleach. Before using it, all surfaces of plumbing fixtures are covered with plastic wrap. Bath curtains, towels and other accessories must be taken out of the bathroom. The drain hole is hermetically sealed with a lid. Pour 5 cups of liquid bleach into the bath and rub it into the walls with a brush. Particular attention should be paid to problem areas. After half an hour, a pot of boiling water (5 l) is poured into the bath and the surface of the plumbing is re-wiped with a brush. You can additionally apply any cleaning agent to it. A clean bath is rinsed with hot water.

5 Ready-made products for removing yellow plaque

To clean the bathtub developed a lot of special tools. They take into account the characteristics of different types of material from which bathtubs are made. Using them for their intended purpose, you can quickly, conveniently and safely put plumbing in order.

The all-in-one Mr Muscle Expert Scale Remover quickly removes limescale, rust and sanitizes your bathtub. The sprayer mechanism allows you to concentrate the liquid or apply it over a wide area, helping to easily treat all areas of plumbing.

To clean the enamel bath, it is better to use products containing baking soda. Pemolux Soda 3 effect removes stubborn stains the first time. It is applied to pollution, wiped with a sponge and washed off with running water.

Faucet cleaning

Specialized products have been developed for the care of acrylic bathtubs. Spray Cif Easy clean removes even very stubborn dirt from polymeric surfaces. It softens old limescale and soap deposits, allowing them to be removed effortlessly. The agent is sprayed onto the contaminated surface and after 5 minutes wipe it with a soft cloth. Then the bath is rinsed, carefully removing the remnants of the spray.

Acrylic bath product Pigeon Bisol not only gently cleans the bath, but also disinfects it. The agent is applied to the dirt for 2-3 minutes, then the problem area is wiped with a sponge and washed off.

The universal Bon Professional cleaner for plastic surfaces will allow you to process not only an acrylic bathtub, but also other plastic coatings. The composition should be sprayed onto the contaminated surface and after 5 minutes wipe it with a soft cloth. After using the Bon Professional product, the bathtub will have a dazzling shine. The thinnest antistatic film will help plumbing look clean for a long time and will facilitate the repeated cleaning procedure.

6 Cleaning the bath with hydrochloric acid

The most radical means of dealing with old orange-yellow rust spots is a solution of hydrochloric acid for technical needs. Acid can be purchased at a hardware store. Before using it, you need to close all chrome-plated surfaces of plumbing fixtures (faucets, faucets, showers, bathroom handles, drain holes) with plastic wrap. The bath should be washed with any detergent, removing the top layers of dirt as much as possible. Before starting the cleaning procedure with hydrochloric acid, the surface on the treated area is wiped dry.

Bath cleaning with hydrochloric acid

Hydrochloric acid is diluted with water in a ratio of 1:2. A twisted cotton cloth is used to apply the hydrochloric acid solution. The use of a brush is not recommended. When using a brush, it is difficult to prevent splashing of aggressive liquid. There is a high probability of contact with eyes or unprotected skin. For the same reason, brushes are not used.

Twisted cotton fabric is recommended to be held with tweezers. You can wind it on a stick. The cloth is dipped in a solution of hydrochloric acid and the contaminated places are wiped with it. After 15 minutes, the surface is rinsed with a solution of soda ash (2 tablespoons of powder per 1 liter of water), then with running water. If the stain is not removed the first time, the procedure must be repeated.

7 Precautions

Clean the tub with rubber gloves. It is recommended to protect your eyes with goggles, especially if the cleanser contains concentrated alkalis and acids. It is advisable to work in clothes with long sleeves.

Access to the bathroom for children, allergy sufferers and animals must be restricted.

To clean acrylic bathtubs, do not use products containing abrasive particles and acids. Gasoline, acetone and ammonia (ammonia) corrode acrylic.

It is advisable not to use bleach with chlorine. It can damage the surface of the plumbing. Since chlorine is difficult to remove from surfaces, it will be absorbed through the skin during hygiene procedures.

Hard brushes, metal scrapers and sponges containing metal elements and fiberglass should not be used to clean the bath of any material. They may scratch the surface. As a result, plumbing will lose its luster. Scratches will quickly accumulate dirt that will be difficult to remove. Over time, cracks appear in the damaged areas.

An enamel bath can be damaged by products containing oxalic acid or formaldehyde. Do not use toilet cleaners to clean the tub. They contain aggressive acids that can damage the enamel.

Before using the cleanser, it is best to treat a small area in an inconspicuous place. This will make sure that it is safe for the bath coating material.

Categories

Popular