How to make a torch in Minecraft, and what is it for? What is the device made of

What is better as a light source - a torch or? Of course, the latter is more pragmatic, and safer if you are going to use it during a night walk through the forest. However, any flashlight has a drawback: sometimes its battery runs out at the most inopportune moment. And then you have to solve the problem with lighting literally on the go ... picked up a stick from the ground, set it on fire ... oh, something is not set on fire! What to do?!

In fairness, even if you always have two or three excellent lanterns in your hiking backpack, being able to quickly make a torch with your own hands from improvised materials is useful. It can always come in handy, BUT you should not forget about precautions. Still, open fire is a source of danger, so it is highly recommended not to use home-made torches in dry conditions in the steppe: one random spark, and fire on sun-dried grass will “run” at a terrible speed. And also in closed, unventilated areas (in abandoned bunkers, for example ... hello!), in coniferous forests and on peat bogs.

The easiest way to make a torch with your own hands: find a dry branch of any coniferous tree, split one end with a knife, stick a few needles into the resulting "brush" - you're done, you can set it on fire. The secret is that spruce (pine, cedar, juniper) wood is impregnated with flammable resin. Thin chips are made from one match. Such a torch can burn up to half an hour, giving light, it will not spark and drip. But it is not resistant to wind and moisture.

To get a more stable light source that can be used in any weather, you have to work on it ahead of time, at home. How to make a good torch at home? You will need:

• Half a meter of steel pipe with a diameter of ~ 2cm
• Strip of asbestos fabric 100x10 cm or 2-3 m of asbestos cord
• Meter of thick steel wire

Asbestos is tightly wound on one end of the pipe, fixed with wire. Congratulations, you've made it absolutely non-flammable torch! In order for it to burn, impregnation is needed - some kind of flammable liquid. There are many options here, my personal preference is vegetable oil. Why? It is always at hand, unlike rosin, wax and kerosene. When burning, it does not smoke much, does not spark and does not stink. And if you soak the winding right, then it does not drip.

That's right - how is it? Pour sunflower oil (preferably unrefined) into a jar. We lower the “head” of the torch there so that the winding is completely immersed in the liquid. We are waiting for half an hour. Can be more. Then we take it out, wrap it with rags and wait another hour. The rag absorbs the remaining oil, and as a result we get a semi-dry torch, already suitable for use. Completely dry is fine too. But you should not light the winding, which literally oozes liquid - the oil will flow onto your hands.

Does the steel pipe heat up during the burning of the torch? Yes. Sometimes even significantly. And I would recommend protecting your hand with a leather glove, or make a comfortable winding of the free end with elastic leather tape.

Another production option a simple torch in field conditions. You will need an empty glass bottle, some fuel (such as alcohol - you always have it in a tourist first aid kit), a piece of rope or a rag as a wick. NOT synthetic! 10% of the volume of the bottle is filled with flammable liquid. The wick is impregnated with it and inserted into the bottle so that it reaches the bottom. They set it on fire. Ready. It is very easy and fast, but such a torch is categorically not recommended to drop, turn over ... it is also better not to hold it in your hands without special need - put it on a flat surface and protect it from the wind.

There are no related articles.

A lot of players with the onset of night in the game are interested in the issue of lighting. There are several ways to light up your home and surrounding area, and one of them is to create an improvised means. Actually, then all players can learn how to make a torch in Minecraft, and what it is for. It should be said right away that this item is well suited for lighting, as the resources to create it are quite affordable, and the illuminated area is large enough for a typical hideout in the game. What's more, there are several varieties of torches, so it doesn't hurt to learn how to craft each of them so as not to get lost in different game situations.

Ordinary torch

It's worth starting simple. Creating a traditional torch from improvised resources is not difficult, and therefore it is so sought after by players. At the beginning of the game, you need to think about how you can defend against hostile creatures and survive. The first thing that comes to mind is the construction of a shelter or a full-fledged dwelling. It must be designed, equipped from the inside and illuminated. This is where the standard torch comes in handy. This tool has several purposes.

The most obvious is lighting up your home, the caves you explore, creating a hostile environment for enemy creatures, and getting rid of water and lava. Craftsmen in Minecraft even use a torch to get air while underwater, so this item should not be underestimated. To create a torch, you will need a stick and coal. The following describes where you can find the right crafting ingredients.

Search for materials

As mentioned earlier, a good supply of sticks and coals will be required to create a torch (if you are going to a cave or have an extensive house). Where can you find these resources in the game world?

The vast and varied world of Minecraft is filled with different cubes and objects. Finding a specific item can be difficult for a novice player, so it's worth getting ready to learn new things about this game universe. However, the recipe for creating a torch is not difficult for a beginner, which is justified - without it, survival in the game will be somewhat inferior and dangerous.

You can get a stick by working with wooden blocks. This resource is available in most biomes where there are growing trees, so it is almost never difficult to find it in the early stages of the game. All you need to do is break some wooden blocks, activate your inventory, place the mined material in one of the four cells, and you will get the boards. These, in turn, need to be moved to the place where you placed the logs in order to create sticks from them. Pretty simple recipe.

The next ingredient is charcoal. You can get it in several ways. This is the creation of a block from existing materials, the search for ore in caves or treasure chests. All these methods are different from each other and it is worth choosing the easiest and most accessible to you at the moment. What needs to be done in order to obtain coal?

One way is to mine coal ore. This block is broken by any type of pickaxe and drops one unit of coal (in the case of an unenchanted tool). This is the easiest and most handy method in situations where you went to search for precious materials in a cave. Just collect coal blocks along the way so as not to be left without lighting.

Another way is to mine coal through burning a wood block. To do this, you need to create a stove, place several blocks of wood in it in the section of the burned material and fuel for it, and wait for the end of the process. Coal can also be found in treasuries (in chests on the railroad). After gaining access to the right resources, craft a torch by placing coal on top and sticks on the bottom. One charcoal produces four torches.

Redstone Torch

One of the features of the Minecraft game is the creation of a red torch. But why is it needed if there is a traditional type of torch? Many players are interested in this issue, and it will be discussed later in the article.

In Minecraft, it is possible to create various mechanisms. The main role in them is played by Red Dust (Redstone). It acts as a connecting cable and is used in the crafting of most of the mechanisms in this game. The activation of these mechanisms occurs due to the red torch. As a source of illumination, it is somewhat inferior to its carbon counterpart, but in terms of functionality it surpasses it.

How is the red torch created? The crafting recipe is not significantly different from the previously considered lighting method - just replace coal with red dust, and you can create your own torch to activate mechanisms and decorations for buildings.

red dust

Where can I get the necessary resource to create a red torch? It is located in the depths of caves approximately on the same level with lava. Break the redstone block with the iron pickaxe and you'll get the item you want!

We hope this article has been helpful to you. Share the material with your friends, leave a rating and comment!

Video

We are waiting for your comments, feel free to write!

During a hike, when you need to look for a way in the dark, but there is no lantern, or at a halt before going to bed at dusk, there is a need for lighting in order to prepare everything for the night. You can use the flame of a fire, but there is a more mobile light source - a torch.

In two video tutorials, watch how to make a torch with your own hands using wood and other auxiliary materials. A torch for lighting can be made using what is right under your feet.

An empty tin can must be fixed in a stick 40-50 cm long. On wounded spruce trunks, resin can be found in sufficient quantities to fill a lighting torch with this natural combustible material. If there is no resin, then it can be obtained using cuts on the bark of trees. Dry cones and birch bark should also be put in a jar. The lighting torch from the can is ready.

If there is no jar nearby, you can make a torch out of birch bark. To do this, you need to make an incision in the stick and insert pieces of birch bark into it. Birch bark produces a very bright and strong flame and is ideal for making a torch quickly.

Indian candle torch

The next way to make a torch is based on an Indian candle. It is completely wooden, long burning, gives a very long and bright light, because its base is large logs.

It is not as mobile as the previous one, but it is also easy to carry from place to place, and it is intended to illuminate the camp. To create a torch, it is better to use logs or whole thin logs from coniferous trees, as they are the most resinous. You also need a stake on which the burning part will be located. For kindling, you will need birch bark or other easily burning material suitable for lighting logs. To improve combustion on the inside of the logs with a knife or an ax, you need to make notches, stuff wood chips. We also add thin chips, splinters.

To tighten the candle, we use, if possible, a wire or a rope pre-moistened with water. The screed should be made as low as possible so that the flame does not reach it immediately. When the screed is ready, it is filled with kindling and set on fire.

And read how Africans get out of the situation when you need to light up your home. In the forest, an ax is always useful, thanks to which you can hang the tool on a backpack.

An easy way to make a torch

zen.yandex.ru
How to make a torch? A simple and angry recipe for everyone!

How to make a torch? Each of you asked this question in childhood, dreaming about adventures or at older ages, forgetting the flashlight at night. Torch is cheap, cheerful and very spectacular!

The main essence of the torch is that it is not the stick that should burn, but what is wrapped around it. Now you know more than 90% of people about torches! Move on?)

Look, we need a stick and filler. From the filler, any rope of natural origin, or fabric, is suitable. We wind the fabric on a stick and fix it tightly. (Really tightly) Either we fasten a couple of self-tapping screws, or we put on an iron rim. You need a tight grip.

Now we dip our torch into vegetable oil (any) and keep our torch there for about 2-3 hours. Now the torch is almost ready. You can make a thicket from below so that nothing drips into your hands, but this is optional.

In fact, at this stage it is already possible to light everyone like an adult, but there is another secret recipe.

We take kerosene, rubber-based rubber glue and liquid soap. We mix kerosene and glue 1 to 1, add a little soap. We shake it all up and put it on a torch. It will be great to burn!

The life of one fuse is about 70 minutes, so you should always have a spare with you! Careful with the mixture, it's almost Greek fire! Extinguishing is very difficult, it can catch fire even under water!

Two ways to make a torch

1 way

The first way to create a torch that can burn for 5-6 hours is very simple. To do this, we need chips from dry wood (preferably long logs obtained from splitting) or small branches, which are then gathered into a bundle.

We take several long chips or a bunch of thin branches and put dry moss in this space in the middle. Now you need to tie it all with wire. In principle, the torch is ready, we just have to soak it with resin or fat. We set it on fire and if everything is done correctly, then the torch will burn out for several hours. The length of such a torch is made from 50 centimeters to a meter, and the thickness is 10-15 centimeters.

2 way

The second way to create a torch is just a variation of the Finnish candle, only adapted not for cooking, but for lighting the area.

We need a log or a thick branch. Choose the length that suits you best. On the one hand, we split the log or saw through it crosswise by about 15-20 centimeters. And insert the kindling into the hole obtained in the center. We kindle it and our torch flares up.

A thinner torch can simply be sharpened and stuck into the ground. And you can just put a thick one and it will burn. If necessary, torches can be easily transferred.

Since childhood I wanted make a good torch. I tried it once and it didn't work out the way I wanted. Has since dropped it. And here again the question: “How to make a good torch from improvised means at home?” So we answer fully and taking into account personal experience, we replenish the section "Needlework" and subsection ""

Torch - a lamp for long-term burning in any weather (such as wind, rain, snow, hail, hurricane, caves, ruins, etc.). Well, since soon (and the celebration of New Year's Eve), resistance to snow is also desirable - so that you can have good fun waving torches at the New Year's Eve. So a good torch:

• a) does not drip hot on hands / does not splash fuel when waving (and you will want to wave a torch 🙂)
• b) does not go out in the wind / waving and, if possible, in the rain.

On the contrary, a good torch:

1. beautifully lit
2. Burns for a long time (as long as needed)
3. Safe
4. From improvised means.

Having determined the "goodness" of the torch, let's move on to achieving it.

Torch components:

• holder (stick 2-4 cm in diameter and at least half a meter in length)
• low flammable / non-flammable base
• combustible mixture
• what holds the base on the stick (retainer)

The principle of operation is like a lamp: the fuel gradually goes to the fire through the base and gives light with warmth.

How to Make a Bad Torch (Don't Do This)

Immediately about the mistake: I took too combustible base (ordinary fabric), too combustible fuel (oil and gasoline), blotted it badly and wound the wire to the stick not very firmly.

As a result:

1. Oil drips.
2. The fabric burns out.
3. Wire very bad hold burnt tissue.
4. The fabric flies off when swung (well, that's safe).

So don't make torches like that 🙂

How to make a good torch at home

Torch materials

So, you need:

1. Maximum non-combustible base.
2. Fuel minimum.
3. Maximum fixation of the base on a stick.

Now about practice. Base material:

• asbestos fabric (the plus is that it can be used repeatedly as the fuel burns out, the minus is that it is not very convenient to wind it),
• tightly twisted or stitched fabric,
• tow,
• hemp ropes,
• sackcloth
• felt.

Important: synthetics melt, drip on hands and friends. Therefore, polyethylene is not a torch. Even though it's on fire.

The thicker and denser the winding of the base, the longer the burning. Tow is available in construction, plumbing stores and markets, fabric - in fabric and workwear stores.

fuel material:

1. Machine oil
2. Kerosene, petrol
3. Vegetable oil
4. Paraffin / candles
5. 1 kg of wax per 100 g of stearin
6. Pine resin (aka rosin): paraffin wax (1: 1)
7. A mixture for a good fire with a pleasant smell: one part vegetable oil; five parts beeswax / paraffin; four parts of rosin; heat in a water bath and mix (the mixture is sticky, difficult to wash off; liquid only hot).
8. A mixture that is sufficiently resistant to water: 1 part of kerosene; 1 part rubber-based adhesive; a couple of tablespoons of liquid soap; shake thoroughly.

Rosin - in shops for radio amateurs. Wax can usually be bought from those who sell honey. Kerosene - from a hardware store; not solar.

Fixing material: steel wire.

Holder material: good thick stick (thin stick burns quickly). A good option for preparing a stick on video:

The branch is thin. A thicker stick is better. But for the experiment, this one will do. A big plus is that this way the wire will hold the base on the stick better than simple winding.

The procedure for making a good torch with your own hands

First approach how to make a torch:

1. Wrap as tightly as possible.
2. Dip for a long time in a container for impregnation, rinse to squeeze out air
3. Squeeze carefully.

The second approach to making a torch:

1. Soak loose material.
2. Squeeze out unwound material.
3. Wrap on a stick.

The second option is more to your liking, it is easier to manage the amount of fuel and remove excess; impregnation is also better (no air bubbles, etc.).

Tip: after winding, cover with a layer of dry cloth and wring out very well. Almost guaranteed there will be no drops of fuel.

The most homemade option for creating a torch (considering that asbestos, rosin, etc. still needs to be bought):

1. Cut several candles lengthwise into thin strips.
2. Wrap the fabric very tightly to the stick, laying strips from candles.
3. Compress, melt a little, compress again - until it stops.
4. Ignite with pleasure, but long.

There is advice to add a little potassium nitrate to the paraffin for quick ignition. I don't know, haven't tried it. Sounds kind of explosive.

And finally the easiest way to make a torch: split the stick, insert a piece of kindling for the fire into the split. Set fire.

Simple, fast, minimum hassle, maximum fire safety. The most it is for children 🙂

Tip: The ignition of the torch can be accelerated by pre-burning the torch to a uniform, deep black. This can save a few minutes during ignition.

So, a good torch with your own hands and at home is EASY to make.

Especially if you have everything you need at home 🙂

Based on materials from http://tgorod.go.ru/cgi-bin/board/topic.cgi?forum=11&topic=73 and http://www.tforum.info/forum/index.php?showtopic=2038