Panther cl500 car alarm wiring diagram. Panther alarm, useful information, how to install. Assistant tools, consumables for alarm installation

Among the variety of different burglar alarms that exist today, the Panther system is especially popular. This is largely due not only to the high reliability of this system, but also, to a large extent, the ease of installation on various car models, as well as the availability of detailed recommendations explaining how to connect the panther alarm.

But for the siren, the best place is precisely in the engine compartment - in a place well protected from third-party access. The main thing is that it should not be close to moving and very hot engine elements. To prevent the accumulation of moisture in this unit, its socket should be directed downwards. Mount the siren with a bracket and a few screws.

The set of the Panther system necessarily includes a limit switch, with the help of which the protection of the car hood is ensured. This switch should be installed on a metal surface connected to the common ground where moisture does not accumulate, for example, on the side surface of the wings in the area of the hood (trunk). When properly installed, the limit switch should have at least 6 mm of travel when closing the hood (and also the trunk, if a second, similar switch is installed).

A red LED signaling the state of the security system is placed on the dashboard in a place that is clearly visible from the outside of the car and, at the same time, the indicator should not distract the driver. Before you start drilling a hole for it, you must first make sure that there are no wires and other elements on the reverse side.

Determination of a place for the Valet switch requires special imagination, since, on the one hand, it should be easily accessible, and on the other hand, an attacker should not quickly find it and turn off the alarm.

For the shock sensor, the most convenient place is a hard surface between the engine compartment and the passenger compartment (from the passenger compartment). Sometimes it is attached with constrictions under the dashboard or on the steering column. In any case, the sensor must have good access to make adjustments.

The standard panther car alarm connection scheme provides for the following distribution (in accordance with color marking) and connection of the main wires:

The white wire, which ensures the side lights flash when the system is triggered, as well as at the time of arming and disarming, is connected to the side lights circuit (if the circuit is of negative polarity, then through an additional relay);
The red wire, designed to power the system through a + 12V fuse, is connected to the positive terminal of the battery ";
White / red wire + 12V power supply of the central unit - through a fuse it is connected to the red wire;
White / black siren output wire - through a rubber bushing, it is laid to the siren installation site;
The dark blue wire used to remotely open the trunk is connected to terminal 85 of the additional relay. Please note that connecting this wire directly to the lock circuits is strictly prohibited;
Green / white wire that controls the interior lighting when the "Panic" mode is triggered, as well as at the time of disarming - the wire is connected to terminal 86 of the additional relay ";
Black wire "weight" - connects to the negative terminal of the battery;
The dark / green wire (-) of the hood (trunk) trigger, when shorted to ground, the system is instantly triggered, is extended to the hood (trunk) limit switches;
Purple wire (+) of the door trigger - regardless of the number of doors, it is connected to only one limit switch;
Purple wire (-) of the door trigger - as in the previous case, goes to the door switch;
The yellow wire for monitoring the presence of power at the ignition switch is connected to the wire of the ignition switch, on which, when the key is turned, + 12V appears;
Orange Starter Interlock Wire - Connects to terminal #86 of the auxiliary relay. At the same time, terminal # 85 is connected to the wire of the ignition switch, on which, at the time of starting the engine, a constant voltage of + 12V is created.

When installing the antenna wire, it is pulled out to its full length and installed in a place where it is difficult to damage it during the operation of the car.

Our instruction turned out to be quite universal, so it fits almost all modifications of pantera signaling devices. Below is a list of models that our guide will fit.

Pantera SLK-250SC
Pantera SLK-450SC
Pantera SLK-400SC
Pantera SLK-300SC
Pantera SLK-675RS
Pantera SLK-650RS
Pantera CLK-350
Pantera SLK-35 SC ver. 3
Pantera XS-330
Pantera SLR-5750
Pantera SLR-5755
Pantera QX-240
Pantera QX-250
Pantera QX-270
Pantera QX-290
Pantera XS-2000
Pantera XS-2500
Pantera XS-2600
Pantera XS-3100
Pantera SLK-868RS
Pantera LX-320
Pantera SLR-5625 BG
Pantera SLR-5625RC
Pantera CLK-650
Pantera SLK-600RS
Pantera CLC-200
Pantera QX-250
Pantera SLK-400SC
Pantera SLK-350SC
Pantera SLK-600 RS
Pantera SLK-300SC
Pantera CLC-180
Pantera SLK-625RS
Pantera SLR-5650
Pantera CLK-375>
Pantera CLK-455
Pantera CLK-355
Pantera CLK-500
Pantera CLK-600
Pantera XS-200
Pantera XS-110
Pantera XS-1500
Pantera XS-1000
Pantera SLK-7i
Pantera SLK-5i
Pantera SLK-3i
Pantera SLK-2i
Pantera SLK-85
Pantera SLK-755 RS
Pantera SLK-75
Pantera SLK-25 SC ver. 3
Pantera SLK-200SC
Pantera SLK-20SC ver. 3
Pantera SLK-500RS
Pantera SLK-100SC

When buying an alarm, any car owner wants to choose an anti-theft system that will be the most reliable. Since the range of such systems on the market today is very large, sometimes it can be difficult to make the right choice. In this article, we will look at the main characteristics that the Pantera alarm system has, consider the connection and configuration process, and also talk about possible malfunctions.

[ Hide ]

Peculiarities

Pantera car alarm has some features, we invite you to learn about them:

the system can operate in a wide temperature range;
there are many models on sale, so the driver can always make a choice, focusing on their preferences and financial capabilities;
excellent ratio of cost and functionality, even relatively inexpensive models have many useful features;
most models of car alarms have the function of remotely opening or closing car doors;
also, most models are equipped with an autorun option;
according to the manufacturer, any Pantera car alarm has a reliable digital data transmission channel, as a result of which the possibility of its hacking is minimized.

Types and models

Consider the most popular models of car alarms that can be found on sale today. Photos of such devices can be found in the article.

Pantera SLK 625RS with two key fobs is one of the most popular anti-theft systems among our car enthusiasts. The SLK 625RS model is equipped with an auto-start option. According to the data in the instruction manual, the operating range is 1 km, if the alert mode is activated, then the range can be up to 2 km. Of course, in fact, this figure will be lower, since such a range is relevant for open areas, without building structures.
SLK 675RS ver.2. Also, our motorists often choose the SLK 675RS ver.2 model. The SLK 675RS ver.2 is also equipped with an auto start function, thanks to which the motorist can always set a specific time at which the engine should start.
Car alarm models with two key fobs Pantera SLK 20SC, SLK 35SC have a wide range of functionality. You can find out from the instruction manual that the SLK 35SC is equipped with a remote door and trunk opening function. One of the features of the SLK 35SC is the "polite" lighting option, which requires an additional relay to connect.
Models Pantera XS-1500 and XS-1000 with two key fobs are equipped with options for protection against false inclusions. Also, the Pantera XS-1500 and XS-1000 devices have a Panic mode, which has been improved by the manufacturer's engineers. Pantera XS-1500 and XS-1000 allow you to automatically arm the car, and these systems are also equipped with an immobilizer. If necessary, the Pantera XS-1500 and XS-1000 allow you to configure the system so that the doors automatically close after the ignition is turned on.
Pantera QX 270. One of the distinguishing features of the Pantera QX 270 with two key fobs is the ability to program a personal code that will allow you to turn off the system. If the QX 270 car enters a potentially dangerous area, for example, with electromagnetic waves, then a corresponding message will be displayed on the key fob. In addition, in the same place, on the QX 270 key fob, the nearest safe zone will be indicated in order to leave the car.
QX 44. As for the QX 44 model, it also has some features. For example, as stated in the operating instructions, System 44 is equipped with a loud and very powerful six-tone siren and six independent security zones in the car.

Instructions for use

If you decide to purchase an alarm of this brand with two key fobs, then it will be useful for you to read the instruction manual. What is the connection diagram, how to properly configure and disable? You will find answers to these questions below.

How to connect?

To properly connect the anti-theft system to the vehicle, use the wiring diagram below. The scheme is given in accordance with the instruction manual.

How to setup?

To properly connect and configure the system, refer to the instruction manual. As you understand, there are a lot of types of such car alarms, respectively, the instructions for setting up and operating will be different for all types. With regard to general settings, one point should be noted. In the event that the system is activated even with a simple movement near the vehicle, it is necessary to reconfigure the sensitivity function.

In most cases, as indicated in the instructions for use, there can be two reasons for increased sensitivity:

if the system sensitivity level is set to the highest level;
if the shock sensor is installed incorrectly or loosely fastened.

To reduce the sensitivity level of the anti-theft system, you must use the instruction manual. As stated in the service manual, it is necessary to adjust the regulator installed directly on the shock sensor.

Experts recommend setting the fifth level on the scale, but here everything is usually individual. You need to set one or another level, and then lightly tap on the windshield or vehicle body. So you can choose the right level. To enable or disable the alarm, simply use the appropriate buttons on the key fob (video by Auto Azart).

Possible malfunctions

As practice shows, in general, the Pantera car signaling is a reliable anti-theft system.

But as the reviews show, there are certain malfunctions that are typical for such alarms:

The remote refuses to work. In this case, there may be several solutions to the problem. First of all, it is necessary to check the performance of the battery in the key fob, as practice shows, most often the problem lies precisely in it. If low-quality batteries are used regularly, there is a chance that they will release a corrosive liquid, which can be harmful if it gets on the board. If replacing the battery does not help, then you can try to synchronize the key fob with the anti-theft system in accordance with the instructions.
Failure of the system block itself. The system unit itself usually rarely breaks down, but despite this, some car owners also face the problem of failure. As a rule, the unit can fail if moisture gets on it, this often happens in domestic cars that get water during rain. If the unit is installed under the hood cable in the cabin, then please note that when you try to open the hood, water can enter the cabin through the cable. And if the device is installed directly below it, then the probability that sooner or later the block will close is very high.
Burnout indicator light. With long-term operation of the signaling, it is likely that the indicator light will burn out over time. This will not affect the operation of the anti-theft system in any way, but the driver will not be able to find out whether he has put the car on the signaling or not. The problem is solved by opening the indicator and replacing the light bulb with a new one.

Pros and cons of the anti-theft system

First the benefits:

the car will always be under reliable protection;
if necessary, the signaling can be configured so that it is the most sensitive and even reacts to touching the car;
functions normally even at critically low temperatures;
the autostart function will allow you to drive a car that has already been warmed up in extreme cold.

Disadvantages:

the price does not always correspond to the quality;
in the absence of experience, it can be problematic to install the anti-theft system yourself;
in practice, remotes often fail;
prices for quality Pantera options are quite high.

Video "How to synchronize the remote with the signaling"

When purchasing a car, all car owners first of all solve the problem of protecting it, using various methods for this. One of the popular car security devices is the Panther SLK-625RS alarm, the instruction manual for which is not difficult for any driver.

Specifications

The technical characteristics of the Pantera slk security car alarm system are as follows:

Bilarm GPS/GSM function - communicating with the security system from any geographic location.
Frequency range - 434 MHz.
Main/Auxiliary Range key fob, m - 1000/450.
Main/Auxiliary Alert Range key fob, m - 2000/700.
Output for additional blocking of the internal combustion engine - 2.
Panic mode in case of danger or attack.
Bypassing a zone with a malfunction when the system is armed.
Operation memory - 2.
The number of security zones is 7.
Immobilizer.
Anti-robbery function.
Disabling the security alarm in two stages.
On/Off alarm without sound.
Possibility of zonal shutdown of system sensors.
Self-diagnosis when the security alarm is on.

Equipment

Car alarm Pantera slk consists of elements:

Main control unit with antenna module.
Impact sensor.
LED indicator and Valet button.
Siren with mount.
Limit switch.
Keychain Pantera with display.
Additional Pantera keychain.
Batteries for the main and additional key fobs, a set of electrical wires.
Scheme of the device, instructions.

Functions

The Pantera car alarm system with two-way communication and remote engine start function was created in 2012. But due to technological flaws and many negative reviews, the first version of the security alarm was discontinued, and Panther SLK-625RS ver.2 was released in 2013.

It lasted only a year, after which the third version of Pantera came out, which is compatible with the electrical system of all modern modes of transport and is equipped with an output for controlling the Comfort mode and interior heating. The function of additional blocking of the internal combustion engine increases the level of protection of the car from illegal entry and theft.

The main functions of the car alarm system Pantera SLK-625RS ver.2:

"Comfort".
Valet service option mode.
Auto search function.
Additional trunk control channel.
Opening / closing door locks when on / off. ignition.
Stopping the operation of the internal combustion engine on a timer.
Turbo timer.
Intelligent startup program.
Compatible with diesel ICE and turbodiesel.
Informativeness of the key fob display.

Advantages and disadvantages

According to numerous reviews from the owners of the Pantera SLK car alarm, the following positive features of this security system can be noted:

Autostart works fine, easy to handle with an affordable price.
Functionality. Remote start in the cold without problems.
Convenient auto-start function with good range.
Autostart and turbo timer are great features.

Of the shortcomings of the device, which are not so many, but they still exist, the following can be distinguished:

The actual range is no more than 500 m, and sometimes less, due to the inconsistency of the installation characteristics, the installers do not particularly respect the panther system.
Autostart from the key fob finds the car only the second or third time.
Complicated service setup.
There are false positives during the heat.

Installation instructions

For the Pantera SLK-625RS security car alarm system, the installation instructions for the main elements have the following sequence:

Main control unit. They are installed in the cabin, they do not recommend working near parts or assemblies that have a power supply that can cause interference and interruptions in the operation of the device.
Siren. Engine compartment: choose a place where it can be installed, away from heating units and with moving parts. The siren is installed with the bell down, which prevents moisture from getting inside.
Hood and trunk ends.
Led indicator. Installation is done on the dashboard. Indicates the status of the alarm system.
Switch push-button Valet. Installation is carried out in a hidden place from prying eyes, but easily accessible for the driver.
Impact sensor. They are installed in the passenger compartment under the dashboard.
Engine temperature sensor. Mounted on the engine or attachments.
External module with two-way communication, with built-in antenna and call button. Installed on the rear or front windshield of the car.

Upon completion of the installation of the main elements of the security device, the operation of the remote start is checked, the protection of the electrical wiring is checked, and the shock sensor is adjusted.

Wiring diagram

When installing the Pantera SLK-625RS, the installation instructions recommend connecting the main components in such a way that the car alarm connection diagram looks like this:

White wire. Parking lights when triggered on / off. security devices.
Red. Power supply from the onboard transport system (+) battery terminal.
white/red Supply power to the main unit and connect with the red wire through the fuse.
White/black Siren.
T-blue. Remote trunk opening.
Green/White "Panic".
Chern. Device ground to (-) battery terminal.
Dark/Green (-) trunk (hood) sensor.
Violet. (+) and (-) door sensors.
Yellow. Power supply control at the ignition switch.
Orange. Starter blocking.

During installation, the antenna wire is laid along the entire length in the places least susceptible to damage. The entire installation of the security system is carried out according to the “plug and forget” principle, which indicates the quality and reliability of the security alarm.

User manual

The User's Guide describes the system's functions and recommends how to use them correctly. The instructions contain the following functions that increase the level of car security and create comfort for the owner:

Remote start of the internal combustion engine.
The purpose of the key fob buttons and their functions.
Active and passive way to arm the system.
Reasons for triggering the device and their designation on the key fob display.
Deactivation of the security device.
Machine. repeated arming the device.
Valet mode.
Protection against false positives.
Panic mode.
Disable Anti-HiJack mode.
"Safe Start" function.
ICE remote start control.

There are also functions of automatic engine start, sound alert or vibration mode, and indicator lights on the key fob.

In our turbulent times, the protection of the vehicle has become an urgent problem. Naturally, a large selection of security systems has appeared on the market. The article discusses the Pantera alarm: its features, advantages and disadvantages, models, operating instructions.

[ Hide ]

Characteristics of the anti-theft system

Pantera car alarm is a new generation anti-theft system.

The lineup

Pantera alarms are presented in a wide range. You can identify the model by the key fob, and you can also learn about their capabilities from the instruction manual.

SLK625RS

The SLK 625RS security system has become very popular. Model with auto start and two-way communication. The kit includes two key fobs.

SLK 675RS ver 2

The Pantera SLK 675RS ver 2 alarm system has a standard set of functions, as in the previous version, but is supplemented with the function of automatically starting the engine at a specified time. A two-level shock sensor allows you to set the sensitivity correctly, thus eliminating false positives.

QX270

This car alarm with two key fobs has the possibility of a programmable code that allows you to turn off the system. It is possible to enable and disable the alarm mode in two stages. Complete with QX 270, the instruction contains information on installation and configuration (the author of the video is Avtozvuk.ua - Autosound Base).

XS 1000

Model XS 1000 is equipped with two transmitters, a dynamic security code, a two-level shock sensor. The instructions that come with the XS 1000 system make it possible to understand the installation and configuration. Silent arming and disarming, protection against false alarms are the pluses of the XS 1000.

Pros and cons of devices

The installation consists of the following steps:

First, turn off the power to the car by removing the negative terminal on the battery.
Under the hood is a siren with a mouthpiece down.
The control unit is installed in the cabin.
Next, you need to install a shock sensor, trunk and hood limit switches, and a Valet service button.
Next, you need to connect to the on-board network.

The settings for each type of alarm have their own nuances. Therefore, regarding the settings for a particular model, it is better to refer to the instruction manual.

After installation, you need to check the operability of the security system in order to use it confidently.

How to turn off the device?

It is performed by pressing a button on the key fob. If this does not happen, then you need to know how to turn off the alarm.

You should proceed as follows:

reduce the distance, radio interference may be the cause;
check ;
replace the batteries in the key fob;
if you have forgotten the pin code, then you need to find it out from the company that installs the system;
fuses should be checked.

If the listed measures did not work, you should contact the company that was involved in the installation.

Categories

Popular