How to repaint an old refrigerator. How to paint a refrigerator at home. Refrigerator preparation and general painting algorithm

Often an old, but still fully functional refrigeration unit spoils the entire interior. Taking into account the level of income in our country, it is safe to say that not everyone can afford the purchase of new household appliances. In this case, you can get out of the situation by painting the equipment in the desired color. It is only necessary to understand how to repaint the refrigerator and what paint to use for this.

Painting is a simple job; it does not require any special skills or abilities from a home master to complete it. The main condition is to choose the right color and composition of the paint and be careful in work. Let's try to figure out what kind of paint you can paint the outside of the refrigerator.

How to paint the outside of the refrigerator: choose the composition of the paint and the tool

The first thing to decide is how the coloring composition will be applied to the surface. There are two options here - brush and roller or spray. Both have their positives and negatives. We will dwell on this issue in more detail.

After the choice of application method is made, you can proceed to the choice of paint. There can be three options - enamel, epoxy or acrylic paint. It is on this issue that we will now dwell in more detail.

Paints for renovating the refrigerator from the outside, applied with a brush and roller

All three types of paints used can be applied with a brush and roller, but there is a certain difference between them:

enamel paint. It is with such compositions that the surface is painted in production, which means that this will be the best option. The enamel has good adhesion, and the surface after staining acquires a smooth, eye-pleasing gloss. The only disadvantage is the presence of highly toxic solvents in the composition. Therefore, it is worth taking care of good ventilation or (if possible) perform work in an open space;
epoxy compound. After application, it looks identical to enamel. It has the same characteristics, however, it significantly loses to the previous version both in price (such pigments are much more expensive) and in ease of application (it is very difficult to work with epoxy compounds);
acrylic. Despite the fact that this composition is inferior to enamel in terms of characteristics, it is quite suitable for surfaces used indoors. In addition, the cost of painting will be much lower.

How to paint a refrigerator without using a brush

Today on store shelves you can find many spray paints that do not require the use of a roller or brush. For painting the refrigerator, automotive pigments in cans are perfect, which are not inferior to ordinary enamels in terms of characteristics. Their use will greatly speed up and facilitate the process. However, the cost of such compositions is somewhat higher.

HELPFUL INFORMATION!

Painting surfaces with a brush or roller is more difficult, but at the same time, the work can be done more accurately without staining the floors and walls. Aerosol paints are best used if it is possible to take the refrigerator out into the open. The advantage of aerosol formulations is that the coating is thin, even.

There are aerosol enamels designed specifically for household appliances, but their cost is higher.

The choice of pigment will depend on the result that the home master wants to achieve. If the design of the kitchen is made in bright colors and something exclusive, unusual is required, then the only right decision would be to use acrylic compositions. Plus, they're completely harmless.

If there are traces of rust on the surface, zinc compounds should be used. They are much more expensive, but they perfectly stop the corrosion process and prevent it from spreading. An interesting option is the use of luminescent paint. You can’t exactly call such a refrigerator an ordinary one - the surface will accumulate light, and at night it will glow slightly, giving back what has been accumulated during the day.

How to paint an old refrigerator with your own hands: stages of work

Before painting the refrigerator at home, you need to prepare the surface. Otherwise, the paint will begin to peel off after a short period of time. We also decide how the painting will be done. Consider step by step the algorithm for the production of works from the first to the last step.

Tools and materials needed for staining

The choice of tool, and paint, in particular, is best approached wisely. After all, not every enamel, especially an old refrigerator, can tolerate painting well.

For work you will need:

solvent for degreasing the surface;
sandpaper;
masking tape, which is used to glue non-painted surfaces;
roller, brush (if this option is selected);
dye;
clean dry rags;
film or paper to protect the flooring if the work is done indoors.

Having prepared everything you need, you can start work.

How to prepare the surface of the refrigerator for painting at home

To begin with, we lay out newspapers or a film around the floor to protect it. Next, with the help of sandpaper, we peel off the paint in places where it peels off. If there are corrosion spots, they also need to be cleaned. After we pass sandpaper over the entire surface, peeling off the gloss. The entire area of the refrigeration unit should be matte - this will ensure good adhesion. We wipe the refrigerator with a dry rag, and then with a cloth moistened with a solvent, degreasing the surface. We seal all non-painted surfaces with masking tape. After the preparation has been made, you can proceed directly to staining.

How to update the outside of the refrigerator: staining methods

When choosing a method of painting the surface with a roller, brush, it should be understood that the work will be more difficult. With excess paint on the brush, smudges may form, which is unacceptable for a refrigerator - this will spoil the appearance even more than it was before painting. The paint is taken with a brush in small quantities, while you should not rush. The resulting smudge can be removed with a sponge, and then paint over this place again using a smaller amount of the coloring composition.

If the option of painting with an aerosol can is chosen, and there is no possibility to take the refrigerator out into the open space, you should take care to protect not only the floor covering, but also the walls. Ventilation is very important - the room should be well ventilated.

IMPORTANT INFORMATION!

Despite the fact that the paint from the spray can lays down in an even and thin layer, with a delay in one place, the formation of smudges is also possible. Spray paint from the cylinder should be evenly, not lingering in certain areas. It is better to paint over the surface a little later with a second layer. Automotive nitro paint dries very quickly. Photos of hand-painted refrigerators can be seen below. Perhaps some of the ideas you use to decorate and paint your equipment.

Other ways to update the appearance of the refrigerator

If the home maker knows how to paint, you can update the refrigerator with acrylic pigments without resorting to full painting. The door, the walls of the refrigeration unit can be painted with various patterns - acrylic is the best suited for this. However, it should be understood that the pattern must be protected by varnishing the surface. We offer you to see how old refrigerators updated with your own hands look on photo examples.

If the home master does not have artistic skills, you can use a stencil that is made independently or ordered in art workshops. In this case, for applying paint, you can use either a roller with a brush (as an option, a sponge), or the same aerosol can. Stickers with various patterns can be a good option.

Cost of Professional Painting: Prices at a Glance

On average, the cost of professional painting in the regions of Russia differs slightly. As of May 2019, prices are fixed at the following levels:

small fridge painting- 5,000 rubles;
middle- 7,000 rubles;
big- 9,000 rubles.

Painting (airbrushing) the door of the refrigeration unit will cost about 8,000 rubles. High-quality stickers can be purchased at prices ranging from 800 to 1,500 rubles. Now, knowing the approximate prices, the home master should think about how much cheaper it will be to do this work with his own hands.

Summarizing

There is no doubt that updating a refrigerator is much cheaper than buying a new one, and doing this work yourself is more convenient than hiring professionals. In addition, it is not a fact that the hired workers will do everything better. After all, it was not for nothing that the old people said: “If you want to do it well, do it yourself.” In addition, such work does not require special skills. The main thing is that a specific idea of renewal is formed in the head, and it will not be difficult to bring it to life.

Users of old but working household appliances often have a question about how to paint a refrigerator. This helps not only to change the color and design of the device, but also to hide the existing flaws: rust spots, cracks and chips.

How to paint a refrigerator at home

Having decided to paint refrigerators with their own hands, the user must choose how the paint and varnish products will be distributed over the surface. The paint can be applied by brush, roller or spray. After that, they are determined with the type of coloring composition.

How to paint

For painting household appliances on the outside, the following compositions are used:

Enamel. Such paint is used in the manufacture of refrigerators in industrial conditions. The choice of such a composition is considered the best option. The enamel adheres well to the surface. After painting, the body of the device acquires a pleasant sheen. The disadvantage is the presence of toxic substances in the composition. Repair work must be carried out in a well-ventilated area or outdoors.
Epoxy composition. After application, it acquires properties similar to enamel coatings. The disadvantages are high cost and difficulty in use.
Acrylic paint. The quality of the coating composition obtained during the application is inferior to the characteristics of the enamel. However, for painting indoor appliances, acrylic formulations are suitable. In addition, such paints have a lower cost.
Aerosol paints. The application of such a composition does not require the use of a brush or roller. Car paints in spray cans are suitable for treating the surface of the refrigerator, the quality of which is comparable to the properties of enamel. Spray application facilitates repair work. The disadvantage is the high cost.

Required Tools

To paint the refrigerator, you will need the following materials and tools:

degreasing composition;
abrasive material;
masking tape used to protect non-painted areas;
brushes or rollers of different sizes;
coloring composition;
dry clean rags;
sheets of paper or plastic film to protect the floor (when carrying out repairs in the room);
personal protective equipment (gloves, respirator).

How to prepare the surface of the refrigerator

After preparing all the necessary materials and tools, you can proceed to preparing the unit for home painting. The work process includes the following steps:

Disconnection from the network. After that, the refrigerator is freed from products, shelves and trays.
Primary surface treatment. With the help of a sponge and detergent, grease stains, dust and other contaminants are removed.
Removing old paint. To do this, first use coarse-grained, then fine-grained sandpaper. This helps not only to remove the old coating, but also to level the surface, providing better adhesion to the coloring composition.
Degreasing. The surface is treated first with a damp, then with a dry cloth. You need to use a fabric that does not leave lint. Surfaces are treated with a degreasing agent.
Protection of unpainted areas. These areas are sealed with masking tape or cling film. Do not paint sealing gum, chrome parts and technological holes.
Floor protection. To do this, you can use old newspapers that cover the floors and nearby pieces of furniture.
Applying a primer. The composition is sprayed from a can onto the corroded parts of the body. The primer is allowed to dry, after which the treatment is repeated.

Painting methods

When choosing a way to paint a refrigerator at home, you need to remember that working with a brush or roller is quite difficult. Excess ink will form streaks or streaks that detract from the appearance of the machine. A more even application is ensured by the use of aerosols, however, it is recommended to work with them outdoors.

Plain

Conventional staining can be carried out in 2 ways:

Spraying. When using aerosol paints, the spray can should be kept at a distance of 25-30 cm from the surface. Apply paint with smooth movements from left to right. You can't stay in one area for long. The paint forms a smudge or dark spot. If an error does occur, the coating can be removed with a solvent. You need to paint the refrigerator in 2-3 layers, each of which is recommended to dry for at least 30 minutes.
Hand coloring. A brush or roller is dipped in paint, after which excess composition is removed. Staining is carried out in a vertical or horizontal direction, making uniform movements. After 30 minutes, the next layer is applied. Hard-to-reach places are painted using a narrow brush. If necessary, a 3rd layer is applied, hiding the shortcomings of the previous one. To protect and give a glossy shine, the surface of the refrigerator is coated with acrylic varnish.

With a simple pattern

If the person doing the repair work can draw, you can paint the refrigerator in a different color and apply different patterns. Acrylic compositions are used for this, allowing you to create complex drawings. After applying the paint, the treated areas are varnished.

In the absence of artistic skills, stencils are used, which are made at home or in workshops. To apply the coloring composition, aerosol cans or familiar tools are used. Stickers are a good option.

In a car service

Professional painting helps to get a smooth surface that does not differ from the factory coating. Such a service is not cheap. You can paint a small refrigerator for 5,000 rubles, prices for processing large-sized devices start at 10,000 rubles. Coloring can be supplemented with airbrushing, which allows you to create a unique design. Such a service will cost 8000 rubles. Sticking stickers costs from 800 rubles. Knowing the approximate prices, you can understand that doing such work at home helps save money.

The result when painting the refrigerator is much better than if you try to paste over the refrigerator with a film. In order for the film to lie flat on the surface of the refrigerator, you will have to work hard to prevent the formation of air bubbles or wrinkles. Staining allows for a more even surface.

The process of painting the refrigerator has some peculiarities, but with careful attention they are easily resolved. If desired, with the help of painting it is possible not only to give a beautiful look to the old coating, but also to bring the new refrigerator into line with the interior of the kitchen.

How to paint a refrigerator

Enamel for painting cars in spray cans is far from being an option for painting a refrigerator, although it may seem so.

The refrigerator is most often painted in or, in rare cases, taken out to the balcony. If you use spray paint, its smallest particles will settle on furniture, walls and floors. In addition, even dust is impregnated with paint - after it settles on the floor, it can only be removed with a solvent. Cleaning with white spirit is not particularly pleasant, and if taking the refrigerator out into the open is not possible, it is better to use a roller for painting.

Of course, when painting with a roller, it will not be possible to achieve a smooth and uniform coating, as with an aerosol spray, but there will be much less cleaning. We must also remember that even a respirator will not save even a respirator from getting into the respiratory organs, so aerosols are only suitable for open space.

Still, if desired, you can use automotive enamel. But epoxy paint, some of the acrylic coloring compounds will do.

Coloring technology

To paint the refrigerator, you need to stock up in advance with paint and a roller, clean rags, film, newspapers, prepare detergent, sponge, adhesive tape.

The surface of the refrigerator should be properly washed and dried. In order not to stain anything around, cover the interior items with a film, cover the floor with newspapers. Provide room ventilation.

It is best to first test the paint on an area of the surface that is not conspicuous - this will help make sure that the color and tone are chosen correctly. It is advisable to remove the accessories from the refrigerator or seal it with masking tape.

When painting with an aerosol, the can must be kept at a distance of 30 cm from the surface. It is necessary to apply paint in uniform movements, directing them from left to right.

The painted refrigerator is dried for about half an hour, then you can apply paint with another layer. If a roller is chosen for applying paint, it is better to choose a not very wide one.

The refrigerator can last up to 15 years without serious breakdowns and malfunctions, but the appearance of the product may suffer. The paintwork deteriorates if sunlight hits its surface. For example, if you install the device on a balcony, then in one summer season the paint may lose its luster.

Physical contact of the surface of the refrigerator with hard objects leads to the formation of chips, scratches and scuffs. Such troubles happen quite often, and for many years of operation, the refrigerator may lose its “beauty” for this reason. To return the household appliance to its previous color or change the shade of the surface, you can paint the refrigerator with your own hands. Also, updating the color of the surface of the unit may be required when a radical change in the interior of the kitchen.

It is not difficult to paint a high-quality refrigerator at home with your own hands, but only on condition that all work is carried out in compliance with the rules and recommendations outlined below.

First of all, you should choose the right paint. At this stage, it is important to decide not only on the color, but also to choose the type of dye. The following paints can be used to perform paint and varnish work:

Enamel in jars.
Car paint in cans.
Epoxy based paints.
Acrylic paints.
Slate paint.

To paint the refrigerator with canned enamel is the most economical, but in this case you will need to purchase, and if you have minimal knowledge of physics, make an airbrush yourself. Applying the paint with a brush or roller will result in darker and lighter streaks and will not produce a smooth finish.

The use of automotive spray cans is the most expensive method of painting, but in this case you can do without an airbrush, and work on preparation, coating and subsequent disposal of waste will be minimized.

Epoxy paints are expensive, and the technology for applying such substances is rather complicated, so they should be used only in the absence of enamel and acrylic dyes.

Acrylic paints have good adhesion, are inexpensive and are able to keep the appearance of the device unchanged for many years. They are also suitable for shelves inside, as they do not contain harmful compounds. Such substances should be applied with an airbrush, after diluting the paint to the required consistency.

With the help of slate paint, the coloring of the refrigerator is carried out only in black. Given the possibility of using the body of the device as a board for drawing with chalk, we can recommend this version of the paintwork for families with children.

Painting tools

Despite the fact that at home, in particular in the kitchen, it is difficult to use aerosol cans or an airbrush, the use of such tools will allow you to do the job at the highest level. If it is not possible to take the refrigerator outside or move it to the utility room, then before painting the refrigerator, cover the floor, furniture and walls with plastic wrap.

The refrigerator can be painted with a brush or a small roller. When using these tools, the repainting process will take much longer, and the surface quality will not be too high, but if the household appliance was originally in poor condition, then you can update the paintwork in this way.

In addition to the listed tools, to perform the work, you must purchase gloves to protect your hands from paint, as well as glasses if the work will be done using an airbrush. In addition, you may need masking tape, which is used to glue parts of the body that cannot be painted and stencils, if you need something spectacular.

Step by step instructions for painting the refrigerator

Before painting the refrigerator, food, shelves, grates and egg holders are removed from the inside. The household appliance is de-energized and defrosted. Then the refrigerator is thoroughly washed using special chemicals. Parts that will not be painted should be removed, but if this is not possible, then wrap it well with masking tape.

To protect the floor from paint, newspapers or plastic wrap are laid out. If the device is painted with a spray gun, then objects located in the “damage” zone are also protected by the film.

Then you should carefully inspect the body of the freezer and shelves (if it is iron grates) for rust. If places with corrosion are found, the surface is cleaned with sandpaper to the metal.

After stripping, such places are treated with a primer. When the primer dries, proceed to the restoration of the old refrigerator. Depending on the chosen method of application, paintwork is carried out as follows:

With the help of a balloon

The most popular color among motorists is silver, so this paint can be easily purchased at an auto parts store. To paint the refrigerator, you will need at least two spray cans. With multi-layer application, it is not at all necessary to wait for the complete drying of the previously applied paint.

Canned paint is purchased by car owners to paint the car on the outside of residential buildings. If work is carried out indoors, then ventilation is provided, and the respiratory organs are protected by a respirator. Otherwise, you can get serious poisoning with solvent vapors.

spray gun

Repainting the refrigerator using an airbrush is carried out in the same way as when using spray cans. The only difference in using these methods is that you will need to dilute the paint yourself to work with the spray gun. In addition, after using the sprayer, all tools that come into contact with the paint and varnish substance are washed with a solvent.

By brush or roller

This coating method is very simple and cheap. The advantage of using a brush is the ability to apply complex patterns. Thus, it is possible to paint household appliances in several colors at the same time. The disadvantages of using these painting tools are the relatively high consumption of paint and the presence of small streaks on the finished work.

Regardless of the method of painting the refrigerator used, it will be necessary to wait until the paint is completely dry before using the household appliance for its intended purpose. If you follow the instructions in this article, you will get a device for cooling products that is outwardly indistinguishable from a new one.

Video: How to paint a refrigerator with your own hands refrigerator

Video: “Repair School”. Master class by Sergey Tregubov “Decorating the refrigerator”

Every year, humanity is more and more dependent on technology, including household. Now you will not be able to find a family whose kitchen does not have such a grocery “safe” as a refrigerator. When it malfunctions, we all have the thought: “How did our ancestors live without this miracle of technological progress?”.

Painted refrigerator in the interior of the kitchen

How to paint a refrigerator with your own hands refrigerator

I invite you to the store https://1euro.com.ua/ a review of household appliances, laptops, tablets, household chemicals from Europe and electrical ...

But, as statistics show, we do not always buy refrigerators due to their breakdown, more often we go to purchase a new one only because the appearance of an old refrigerator does not please us, as before.

Unfortunately, not every person knows that the problem of the inappropriate appearance of the refrigerator can be solved by painting it. This is what will help transform your indispensable kitchen “keeper” of products without large financial investments.

Of course, like any restoration, the transformation of the refrigerator has its own subtleties. What paint to paint the house outside the plaster and how much paint? Especially all the tips should be taken into account if you decide to paint the refrigerator with your own hands.

How to choose the right paint and tool?

Old refrigerator for painting

To paint the refrigerator with your own hands, you will need to buy paint and find the right tools.

The main task is the right choice of coloring materials, because the surface of refrigerators is not made of the simplest material, and not any tool can be suitable for this purpose.

It is worth paying your attention that the layer of paint should first of all serve as a protection against mechanical damage, and then be a decor.

In order to paint the refrigerator with your own hands with high quality, paints and varnishes must differ in the following characteristics:

have the possibility of tinting;
be able to hold the paint layer upright;
be flexible;
do not be afraid of exposure to detergents.

Considering the above requirements for paint, we can conclude that a waterproof-based paint for indoor work on metal surfaces is suitable for transforming the device.

This kind of paints and varnishes can have a variety of composition.

But, for surface decoration, it is not necessary to delve too deeply into the compositions of paints. For such purposes, it may be suitable:

nitro enamel, which is used in the automotive industry;
acrylic mass for metal work;
epoxy or polyurethane mass.

From such a variety, you can choose whatever you want. Also, with these tools, you can process the device inside. A roller with a not very wide working canvas or a brush is perfect for work.

You can also use aerosols, for which no tools are required at all.

Today, rubber-based paints are considered the most popular. Their detailed technical characteristics are given in the table below.

Surface preparation

How to paint a refrigerator?

It will not be a discovery for anyone that when cooking food, grease settles on all surfaces of kitchen appliances, which, after drying, turn into unpleasant stains. After some time, they become covered with dust, therefore, for their high-quality removal, it is better to cover the appliances with detergent-resistant paints, and the refrigerator is no exception.

Of course, before starting to apply the paint, the surface must be thoroughly cleaned so that no dirt interferes with the even and smooth application of the paint.

To clean the surface, you may need:

detergents for cleaning fat;
abrasive sponge;
rags;
sandpaper with fine grain;
surface degreasing liquids;
possible primer;
cling film or masking tapes and adhesive tape;
lining in the form of old newspapers;
individual protection means.

Varieties of techniques for painting the refrigerator

We paint the refrigerator with our own hands

After all the necessary materials have been prepared, you can proceed to direct staining.

Preliminary preparatory materials are as follows:

Disconnect the refrigerator from the power supply and remove all internal shelves and drawers.
Wash the device well from the outside with detergent.
Remove the old coating with sandpaper, and sand any chips and damage. Such manipulations will increase the level of adhesion of the surface of the refrigerator with paint.
Remove any remaining dust with a wet and then dry cloth.
Degrease the surface.
If the paint requires it, prime the surface of the refrigerator.
Hide the hardware under cling film or masking tape.
Optionally, with the help of adhesive tape, you can apply a certain pattern.
Cover the floor near the appliance with old newspapers.
As a test, apply a little paint to an inconspicuous area of the refrigerator to make sure you choose the right shade.

After all the preparatory work is completed, you can start painting the device. At this stage, all recommendations will depend on the selected type of colorful materials and tools.

Please note that regardless of the type and composition of the paint, the use of personal protective equipment is mandatory!

If you chose paint in aerosol cans to paint the refrigerator, apply this composition at a distance of 30 cm from the surface. Your movements should be uniform, try not to linger too long in one place, so that too much paint does not form on a separate area of \u200b\u200bthe surface. If you could not avoid such a disaster, immediately use solvents.

The application of paint should take place in two or three layers, between which it is necessary to take a break for 30 minutes, so that each previous layer has the opportunity to dry well.

To work with a roller or brush, you need to apply a little paint on the tool and move from left to right in a vertical position. After 30 minutes, a subsequent layer of paint can be applied, and hard-to-reach areas can be painted over with brushes with a small working canvas. If you can see small errors on the product, apply a third final coat of paint, which will hide all defects.

To consolidate the result and give the refrigerator a gloss or matte finish, it can be treated with an acrylic-based aerosol varnish.

As you can see, to solve the question “how to paint the refrigerator?” possible without much difficulty. Such manipulations will give your old kitchen assistant a new life and bring originality to your interior. For the sake of this, it will not be a pity to spend a couple of hours, especially since such a decorative transformation will be able to delight the eye for you and your household for many years to come.

Additional Information:

alkyd enamel based on organic solvents has a white base element, the coloring pigment is added additionally, the smell is strong before drying;
water-based acrylic enamel is odorless, only titanium dioxide based paint is used, for refrigerator inside and outside;
organosilicon alkyd enamel, which contains special pigments that hide defects in uneven painting.

A little paint is collected on a roller or brush. What dissolves rust at home? Then comes the staining in the vertical direction or movements from left to right. After half an hour, a second layer is applied. Hard-to-reach places can be painted over using a small brush.

If necessary, the third layer will hide all the flaws of the previous two.

All types of materials used for these purposes are quick-drying. Drying time for each layer is 30 minutes. Then proceed to re-staining. If you are working with a roller or brush, start painting from the top, gradually moving down and down.

Some people prefer to paint clockwise. It is better to do this while standing, so that you can always even out the color and remove smudges in time. A painted refrigerator can be varnished, which is used to give cars a glossy sheen.

When choosing which paint to paint the refrigerator, do not forget about restorative compounds. How to make luminous paint that glows in the dark at home? If the walls of the product are touched with rust, then Zinga conductive paint or other materials containing zinc or aluminum granules will help prevent the development of corrosion.

Car dye is beautiful and resistant, sold in cans. It must be applied by spraying. However, this dye has disadvantages, for example, its high price, it is toxic, during the process it is necessary to cover the face, body and surrounding objects, since splashes are not controlled during the process.

After painting, you will have to remove randomly painted places with a solvent.

People who can draw beautifully or draw pictures from a sample decorate refrigerators even with Gzhel or Khokhloma painting. There are also samples painted in any other styles of painting. Household appliances, decorated with hand-painted, look amazingly beautiful and bring a special touch to the interior.

Using paints under a brush or roller, apply a thin layer. First, check how the composition lies somewhere in an inconspicuous place. The paint must be opaque and not run down a vertical surface.

Each next layer is applied after the previous one has dried.

Restoration will require dye and a minimum of tools. All that is needed is a narrow roller and brush, and in the case of using aerosol cans, even they are not needed. The selection of a coloring composition is a responsible matter, because it must not only perform a decorative function, but also protect equipment from various mechanical damage.

Therefore, paints and varnishes are required that meet certain requirements: they are easily tinted, hold the paint vertically, and are resistant to detergents.

Categories

Popular