How to make slime without glue with flour. Gum for hands or a hand ghost - how to make a slime yourself. From liquid soap or shampoo without glue

Lizun (slim, handgum) is a toy that became known to the general public not so long ago thanks to the release of the well-known film "Ghostbusters".

One of the main characters of this cartoon picture was a ghost named Lizun.

Its creators are Mattel, which released it under the name Slime.

Lizun began to call this toy after the translation into Russian.

Its peculiarity is that it was able to stretch, spread and take any shape.

Surely in childhood, many had such a toy that could be thrown at a wall or other object, and it invariably stuck to it.

Making slime at home: is it possible?

An extraordinary and very curious Lizun very quickly gained popularity among the kids, which immediately led to its mass release around the world. Slimes are still popular today. You can buy this funny toy in the store, but it's much more interesting to make it yourself. If you want to please your baby, but do not know how to make a slime at home, after reading this article you will have no questions left.

Making such a toy at home from improvised material is as easy as shelling pears. The most used methods: with shampoo, water, plasticine and soda, with or without sodium. In addition, you will have the opportunity to independently adjust the density of the toy and paint it in the desired color using food coloring or gouache.

How to make a slime at home: materials needed

How to make a slime at home, and what materials are needed for this? The choice of materials is very large, it includes:

water with starch;
condensed milk (to give the toy taste).

This is not a complete list of materials, but we will talk more about this below. Now we recommend that you familiarize yourself with the basic recommendations and tips for making toys, if you want to end up with a quality toy. The list looks like this:

1) the most important condition for storing slime is a closed container. For this, a small jar is suitable, in which the lid closes tightly;

2) do not leave the toy in direct sunlight, near heaters or batteries (the slime prefers a low temperature);

3) you can not put the slime on a surface with a pile (for example, on carpets and clothes), since miniature fibers tend to stick to it, which will lead to a heterogeneity of its surface;

4) to make the toy unique, add some essential oils to the recipe during its creation, they can give a pleasant aroma to your creation;

5) to make the slime even more original, you can add a certain amount of cosmetic sparkles to the mass being prepared, this will give your cartoon superhero a little “glamour”;

6) to make the craft more palatable, you can add sugar, salt or condensed milk to the recipe;

7) if you want to make your toy more plastic and viscous, and also so that it does not leave marks, you need to add a few drops of vinegar to the paint solution;

8) to give the cartoon character a natural look, add some glycerin as well, this will make it more slippery;

9) adding hydrogen peroxide will make the homemade slime lighter and more airy;

10) to "revive" the toy, during the manufacture, take a few rubber buttons and stick them on the place where the slime will have eyes and a nose. Everything here will depend on your imagination: use any means at hand and make your homemade craft as believable as possible.

How to make slime at home: recipes

So, we got acquainted with the recommendations and tips, now we have come to the most basic - manufacturing recipes. There are more than enough materials from which to make a slime, but we will consider some of the most popular and simple ways.

Making slime from water

This method is the most popular. The slime that will turn out in the end is not much different from the one sold in the store.

To make it you need:

1) 100 g of PVA glue. It is desirable that the glue is as fresh as possible.

2) A solution of sodium tetraborate (4%), its powder is also suitable. It can be purchased at any pharmacy, it is inexpensive and almost always in stock. In addition, this solution is often used in jewelry workshops, so it can also be found at points where radio products are sold or in shops with chemical reagents.

3) Dye of the desired color. It is advisable to use food, it is safer for the human body. Alternatively, you can use gouache or green paint.

Process of creation:

1. Pre-prepare a small container in which you will make a solution for crafts. Pour ¼ cup of lukewarm water into it.

2. Take 100 g of PVA glue and pour it into a container of water. The density of the toy will directly depend on the amount of glue, so here you will need to determine it yourself. If the mixture seems too liquid to you, add a little more glue than necessary. After that, the mixture must be mixed well.

3. Then you need to add sodium tetraborate. If you use a solution, one vial will be enough for 100 g of glue. When using the powder, dissolve 1 tbsp. l. in ½ cup of water and rinse into a container.

4. Add dye at the end.

The mixture is ready. Now take a container with this mixture, pour all the contents into a plastic bag and remember well.

Ready! You have a new toy - a slime made of water.

How to make slime from soda

If sodium tetraborate is not available, then this method will suit you perfectly. But keep in mind that such a slime is short-lived, and it will be possible to play with it for no longer than four days.

Required components:

PVA glue.

If needed, food coloring.

Plastic container.

Stirring stick. If you interfere in manual mode, use rubber gloves.

Creation method:

1) Take a plastic container, and mix ¼ cup of warm water and 50 g of glue in it to make a homogeneous mass;

2) Then add the dye of the desired color and mix everything again;

3) Take another separate container and mix in it ¼ cup of water and 1 tbsp. l. soda;

4) Pour the contents of the additional container into the main container and stir well again.

That's the whole process, the soda slime is ready!

We sculpt a slime from plasticine

This type of toy differs from others in that it has an excellent ability to keep the shape given to it.

To create this type you need:

food gelatin;

plasticine;

container, plastic utensils are best;

additional container made of metal;

spatula for mixing.

Process of creation:

1) first you need to pour a certain amount of cold water into a metal container and add gelatin to it. The required proportions can be read on the package. After that, you need to let the gelatin stand in water for 1 hour;

2) after an hour, you need to put the container on the fire and bring all the contents to a boil. As soon as the water boils, remove the container from the fire;

3) then pick up 100 g of plasticine and remember it well so that it warms up;

4) after that, take a plastic container, pour 50 g of warm water into it and mix the clay in it well with a spatula;

5) then pour all the contents from the metal into a plastic container and mix well until a homogeneous mass is obtained;

6) Put the resulting mixture in the refrigerator until completely cooled.

Everything, the process is completed, you have a plasticine slime.

How to make slime from shampoo

This method is very easy to prepare, but at the same time, it has a significant drawback - reliability. However, this does not prevent him from being popular among the population.

You will need:

Glue "Titan". Choose this particular type of glue, and be sure to check its expiration date, as low-quality glue can ruin the whole end result for you. You can buy it at any stationery or household store;

Shampoo (any brand will do)

Rubber gloves.

The process of creating a toy:

1) Take a plastic bag and pour shampoo and glue into it in a ratio of 2 to 3;

2) Mix the resulting mixture until it finally thickens.

Get a ready-made toy from the package and delight your child!

How to make slime without sodium

If there is no sodium tetraborate at home, you can use this method. To make it, you will need the following ingredients:

warm water;

dye;
essential oils.

How is it done

1) take water and starch and mix them in a ratio of 1 to 1;

2) add some dye and mix again;

3) sequins can be used as desired, they are able to give your crafts brightness and unusualness;

4) essential oils will be needed to give your toy a pleasant smell.

Mix all the ingredients listed above and voila - you got a new kind of slime.

In conclusion, I would like to say that the slime is a very exciting toy that can please your child, it can also be used as a gift to a loved one. In addition, the slime is also useful in that it will help develop fine motor skills in the hands of the child, and for adults to massage the palms.

Make toys with your own hands, because it is very interesting and informative, people close to you will surely appreciate your efforts.

Lizun is one of the favorite children's toys. It has the consistency of soft chewing gum, but does not stick to hands.

Due to the fact that a variety of ingredients can be included in such a mixture, you will spend only a few minutes to “grow” a slime at home on your own. This is done very simply, and even the children themselves will be happy to participate in the work.

Let's find out some of the easiest ways and life hacks on how to make a slime at home.

Glue Slime Recipes

The most common option is the use of glue. Thanks to this component, the slime does not break and retains its shape. What kind of glue can you make a slime with?
Here are the three most popular options:

you can see how to make a slime with clear PVA glue or white glue;
in the work you can use a glue stick;
super-strong glue-moment is also suitable, but it should be handled with extreme care.

The first simple way that we will talk about is a slime made from sodium tetraborate, PVA glue and water.

You will need one hundred grams of fresh glue, a 4% sodium solution, and a coloring ingredient like gouache or brilliant green.

Pour ¼ cup plain water into a special cooking bowl. Previously, it is better to hold it at room conditions in order to get a warm temperature.

Next, pour in the glue until a thick consistency is formed. After the glue, tetraborate (the whole vial) and the coloring component are added. All that remains after adding the ingredients is to wrap the mixture in cellophane and mash. Slime is ready!

Now let's find out how to make Velcro from stationery and silicate glue. This method is not so popular, but it allows you to get an equally high-quality toy.

In addition to glue, use alcohol and a coloring ingredient.

Mix alcohol and glue in equal parts (you can take vodka, but then it should be one and a half times more).

Color the mixture in the desired color, stir, remove from the container - and wash under cold water. After hardening with a slime, you can play.

Do you know how to make a licker out of glue and shampoo? If you decide to use this recipe, choose Titanium glue, as it will allow the slime to retain its strength for a long time.

Add shampoo to the bag - and immediately fill it with glue (it should be one and a half times more). Tie up the bag and shake. This will give you an even mixture that will thicken in just a few minutes.

A detailed video on how to make slime from titanium glue:

Many are interested in how to make a transparent slime without sodium tetraborate. This component at home can be replaced with soda. And if you add dyes, our slime will be colored.

What we need: half a glass of soda, one hundred ml of glue, half as much water, dyes, a couple of containers and a wooden stick for kneading.

Let's make it from PVA glue and soda:

make the glue more liquid with water (for example, by mixing 100 and 15 ml);
color the mixture (food coloring will not stain your hands);
stir your workpiece until the paint dissolves;
Mix water and baking soda separately. Pour the finished porridge to the rest of the ingredients;
mix the mass thoroughly, wrap in a film or cellophane - and shake;
if you want the slime to thicken more, keep shaking or stirring. You can try adding more baking soda and glue.

Remember! It is better to store such a slime in a closed container, as it has a short service life, and without proper conditions it will deteriorate even faster.

Don't have PVA glue on hand? Not scary! There is another very simple way to make a lick stick from a glue stick. Watch the video recipe - we can do without PVA glue:

Of course, glue is far from the only component that allows you to get the right consistency for a slime toy. Below you will find many more interesting ways and videos on how to make a slime without sodium tetraborate and PVA glue with your own hands.

On shampoo and gel

Let's talk about a few popular ideas on how to make a lick from shampoo at home.

The first way - the recipe consists of shampoo, water and soda. Mix the components in equal proportions, add paint or brilliant green, traditionally wrap this mixture - and knead in cellophane.

After that, it will be possible to try the slime for quality.

A similar method involves the use of not soda, but salt. Watch the video on how to make a toy from shampoo, water and salt:

As you understand, in such recipes an important role is played by a component that allows the shampoo to thicken a little.

What to use for such an effect depends only on your imagination. For example, it is easy to guess that you can mix shampoo with flour.

What is needed for such a toy: fifteen gr. shampoo, one hundred gr. flour of any kind, as well as one hundred gr. slightly warm water. We start by mixing the dye and shampoo in a warm liquid.

Later, add the sifted flour - and knead the doughy mass. The desired consistency will be obtained fairly quickly.

Attention! Slime made from shampoo and flour is greasy and can leave stubborn marks on light-colored materials.

Instead of flour, you can use starch. How to make slime from starch and shampoo - see the following video:

Since shampoo and other household personal care products have a similar consistency, you can easily replace it with something else or even mix several different preparations at once.

Here is one way to make a real slime from shower gel and shampoo: these ingredients will be kneaded in equal proportions.

Advice: do not use a gel with small granular particles that has a scrub effect.

Knead the future anti-stress toy from these products and put it in the cold for about an hour. After that, you can use the mass for its intended purpose. But keep in mind that with increasing temperature, its viscosity will decrease.

After playing, the slime should be sent to the refrigerator.

How to make a slime out of washing gel? To make it last longer, use glue. Mix these ingredients, color the mass if necessary and mix thoroughly. That's all.

It remains only to hold it in the refrigerator for a while.

By the way, it’s easy to make a slime from foam or shaving gel with your own hands. Here is one of those ways:

How to make toothpaste

One of the easiest ways involves using toothpaste.

Take a not very liquid paste (white is better not to take) and pour into a container. Add glue in the same amount there. Knead this mass, adding glue if necessary.

Stir as long as possible: this will affect the density and viscosity. After kneading, the slime will be ready.

Below you can watch a video recipe on how to make a slime from toothpaste with your own hands:

Soap and detergent recipes

Let's start with a description of an anti-stress toy made from detergent and soda. Most often, soda is taken for him, as well as water and Fairy. Use gouache to get the desired color.

In a pre-prepared container, add dishwashing detergent - and begin to thicken it, gradually adding soda.

If you find that the slime is too thick, add water to get the opposite effect. When adding ingredients, do not stop stirring the mass.

The licker will be ready even at room temperature, you do not need to send it to the cold.

And here's how to make it from liquid soap and salt:

For an even thicker consistency, toothpaste can also be used as the main ingredient. See for yourself how you can make a cool licker out of soap, paste and water:

On washing powder

Powder is an ingredient that can be found in every apartment. The peculiarity of this recipe is that not any kind of powder is suitable for us.

It is better to use liquid products: dry powder will have to be pre-kneaded with water until the desired consistency is obtained.

It’s easy to figure out how to make a lick yourself out of Persil, Tide and any other washing powder: in addition, we will use glue and dye.

Remember! This procedure must be carried out with gloves so that the powder does not damage the delicate skin of the hands.

Where to begin? Choose a mixing bowl and add a quarter cup of glue to it. Immediately drop a little coloring ingredient and mix it with PVA.

After that, add two large spoons of liquid powder and begin to knead the product until it is sticky and thick. To slightly reduce the density, add more powder.

Now, with gloves, start kneading the finished mass like dough. Remove the formed liquid. You will get a slime that looks like rubber. It must be stored in a closed container in the cold.

Flour method

When we make a toy at home, together with children, it is very important to think about safety. A simple and safe option is a recipe with flour.

Attention! To color such a slime, you should choose only high-quality natural ingredients.

Before you make a craft from flour and water, prepare everything you need: about 0.4 kg of flour, as well as separately cold and warm water. Pour the flour into a container, after sifting. Add to it 0.25 cups of low temperature water.

Immediately add the same amount of warm liquid. Let's start mixing.

We add a little dye: a couple of droplets is enough.

Our slime will become sticky, so put it in the cold for four hours before playing. After that, the mass will be viscous, dense enough and pleasant to the touch.

plasticine slime

A fairly simple instruction on how to make a slime yourself from plasticine, gelatin and water will help you quickly prepare a new interesting toy for your child.

Take about one hundred and twenty grams of plasticine, one small package of gelatin and half a glass of water. First, make the gelatine into jelly according to package directions. When the jelly is still warm, pour the hot liquid into another container.

At the same time, boil water, reduce the gas - and start dipping crushed plasticine there. Stir the water during the process.

After the plasticine fragments have melted, add gelatin. Stir the prepared anti-stress mass again. After a couple of days, you can play with it.

Attention! Plasticine slime paints hands, so be careful.

If desired, a fluorescent-type paint can be added to the mixture at the mixing stage. Then the slime will be bright in the dark.

Another way is on the video: from it you will learn how to make a slime from plasticine:

Other recipes

There are many more ways to create such bright toys: you can learn how to make a liquid slime from water and paint, hand cream, eye drops, glycerin, dough, lipstick.

From some ingredients, you can get edible slimes: for example, from watermelons, nutella, mashmellow, chewing gum. And here are some more ideas on how to make slimes at home.

Video on how to make an edible slime at home:

How to make a nail polish slime: Mix fresh glue with a few drops of nail polish. After mixing, add a few drops of tetraborate from a pipette.

Stir again. After the mixture begins to acquire a thick consistency, put it out of the container on the polyethylene. Roll up and start kneading from side to side by hand.

In the future, if you lose shape, you can leave the slime in the refrigerator.

And here's how easy it is to make slime from boric acid:

There is a way in which you can easily and simply make your own glass slime without color. It will be obtained from one hundred grams of polyvinyl alcohol and twenty-five grams of 4% tetraborate.

Add borax to the alcohol and start stirring quickly until the mass thickens completely. You don’t have to add additional ingredients: the transparent toy will be ready.

By the way, the slime prepared according to this recipe is non-toxic and is much more suitable for children than similar purchased toys of an incomprehensible composition.

How to care

How to care for a slime at home so that it lasts for a long time? Periodically you can wipe them with alcohol. Do not dip them in water or wash them under a tap.

To maintain the desired consistency, you can use a syringe to add alcohol, water and other components inside.

Children really like this toy, and there is nothing surprising in it: pleasant to the touch, bright slimes coolly creep along the wall, separate and gather.

Such a toy not only charges with positive, but also develops dexterity, motor skills and other skills. And it even relieves nervous tension, so you can join the kids and play together!

Watch a video on how to make an anti-stress slime yourself - three more ways:

If you couldn’t find the starch for the previous recipe, then this recipe is definitely suitable, since absolutely everyone has salt!

Here's what you need to prepare:

Thick shampoo (200 ml).
Salt.
Dyes and/or glitter for decoration.
Mixing bowl.

Step by step recipe:

Add the shampoo to the bowl and add any embellishments if you use them.
Start mixing the shampoo and gradually add one tablespoon of salt into it. Add salt until the mixture becomes thick and lumpy.
Put the mixture in the freezer for 60-90 minutes. The time depends on how thick you want the slime to be.

This is how, with the help that every home has, you can cook a good slime without glue. But it is worth considering that such a slime will melt in your hands and become more liquid, for this, just re-freeze your slime.

Slime recipe without glue and sodium tetraborate from soap and hand cream

From any hand cream and detergent or soap, you can also make a slime without glue! Let's see what is needed for this and how to do it.

Ingredients:

Soda (teaspoon).
Soap or dishwashing liquid (tablespoon).
Hand cream.
Mixing bowl.
Spatulas for mixing ingredients.
Dyes and various decorations.

Step by step recipe:

In a bowl, thoroughly mix baking soda and soap.
Add hand cream and mix thoroughly again.
If you want to decorate the slime, then add the desired decorations to the mixture and mix until smooth.
Transfer the mixture to a small transparent bag and refrigerate for at least 2 hours. If after the specified time you do not like the consistency of the slime, then leave it for the same amount.

If you choose a cream with your favorite scent, then the benefits of such a toy will be even greater!

Clear liquid soap and sugar slime recipe

Such a slime without glue can be decorated with any glitter and dyes, which will turn it from a boring transparent substance into a fun and colorful toy!

You need the following ingredients for cooking:

Thick clear soap or shampoo (5 tablespoons).
Sugar (2 tablespoons).
Mixing bowl with lid.

Step by step recipe:

Mix sugar and soap or shampoo, whichever you decide to use, in a bowl until smooth.
Close the bowl tightly. Better for such purposes, a food container is suitable, which comes with lids on special clips that allow you to tightly close the container.
If you do not have such dishes and there is nothing to close the bowl tightly with, then you can simply wrap it with a bag and secure it with a rubber band.
Put the finished mixture in an airtight container in the refrigerator for at least a day. After a day, if the consistency of the slime did not suit you, then leave the substance for another day in the refrigerator.

Slime recipe without flour glue

Such a slime can be made for the smallest and most curious, since there is nothing harmful in the composition and nothing bad will happen if the baby tries the mixture.

To make this slime without glue you will need:

Wheat flour of any grade (400 grams).
Hot water (50 ml).
Cold water (50 ml).
Food coloring if the slime is made for a child. Adults can use any dyes and other decorations they wish.
Mixing bowls.

Step by step recipe:

It is better to sift the flour into a bowl so that the consistency is more uniform.
Pour cold water into the sifted flour in a thin stream and stir at the same time so that no lumps remain.
Now add hot water in the same way while stirring.
Next, add decorations and mix thoroughly.
Upon completion of the previous points, the mass should be left to cool. Time can be different for everyone, so check the slime every hour.
If the finished slime sticks to your hands, you can lightly sprinkle the toy with flour.

In order for the slime without glue to please you as long as possible, it is better in a package. It is worth considering that since all the ingredients are natural, then the shelf life of such a slime is a maximum of 5 days!

Slime recipe without toothpaste glue

This glue-free slime is also very easy to make, since toothpaste is used every day, so finding it is not difficult.

For this slide you need:

Toothpaste. A whole tube of plain white paste without dyes is better.
Any decoration of your choice.
Metal bowl for mixing.

Step by step recipe:

Squeeze the entire tube of toothpaste into the bowl.
Next, any decorations and dyes you choose are added.
Thoroughly mix the paste with the decorations so that the mixture is uniform in color and consistency.
The bowl is placed on low heat so that the mass heats up gradually and evenly. It is very important!
Constantly stir the future slime for 10-15 minutes, and then immediately remove from heat and let cool for a while.
When the mixture becomes warm, you can start kneading the slime with your hands. If the slime sticks strongly to your hands, then you can grease your hands a little with sunflower, or any other, oil and continue to knead.

The recipe is not suitable for all pastas. Some pastes do not thicken, if yours is just like this, add starch. Such a slime will not stretch, unfortunately, but it can be crushed and rolled. Photo taken from the Internet, may differ slightly from the result.

Now you know how to make slime without glue and sodium tetraborate.

If the recipe requires heating the mixture on the stove, then this is done strictly on low heat, so that the heating occurs smoothly and nothing can spoil the future hand toy.
When using dyes, it is best to add them starting with one drop, as if you go too far, your slime will be colored, which few people will like. The dye can always be added and re-mixed into the slime, and it will not work to remove the excess.
It is better to store all ready-made slimes in a bag or airtight container so that it does not dry out and thus please you longer.
Clearly observe all proportions, otherwise the slime may not work out, and you will be dissatisfied with the result.

Conclusion

As many could understand, having read these recipes, chewing gum for hands, slimes or slimes, call it what you want, can be made from almost everything, the main desire! Even if you don't have an ingredient at home, you can always find it in any grocery or hardware store, unlike sodium tetraborate, which is not always available. Try, create and you will definitely succeed!

Find more recipes

Lizun is a very entertaining toy for children of any age. Its consistency is like jelly, which does not melt from the heat of the hands. But few people know how to make a slime from PVA glue on their own. You can buy a popular toy in any children's store, but the composition of the factory product often includes chemical components, which parents who worry about the health of their child do not like.

These two components are in every home. The recipe is also incredibly simple:

Pour 100 ml of glue into a suitable container, pour in 15 ml of water. Add a little dye, mix the composition with a wooden stick or an old pencil.
0.5 st. pour soda with hot water to make a thick porridge. If you overdid it with water, you need to mix more soda. Wait until the porridge cools down.
Combine the soda solution with the adhesive mass.
Mix until smooth. In order not to get dirty, you can collect the whole mass in a bag, tie it tightly and shake until the slime becomes completely homogeneous.

After kneading, the toy is ready for use. If the mass is still liquid, then you need to add a little more PVA and soda.

There is another option - a slime made from air freshener and PVA glue. The glue is tinted to your favorite shade, and then sprayed with freshener for 10 seconds. Next, you need to collect the mass with your fingers and knead well. At first, the slime will be sticky, but after careful "processing" it will become elastic and pleasant to the touch.

From shampoo and toothpaste

Shampoo or liquid soap is used as the main ingredient:

Squeeze a piece of toothpaste in the amount of 20 g into a small bowl.
Add 20 ml of shampoo. Mix.
Introduce flour in small portions (no more than 5 tsp). First, it is better to mix the mass with a spoon, then knead well with your hands.

In conclusion, the finished slime needs to be slightly moistened and slightly wrinkled with your hands.

Another option for making a shampoo-based toy:

At 0.5 st. water add 200 g of starch and 100 ml of shampoo.
To stir thoroughly.
Put in the refrigerator overnight.

It is necessary to store the substance in a cold place in a closed container. The expiration date is 4 weeks.

Boric acid and glue toy

There is also an option to make a slime from PVA glue and sodium tetraborate, in a simple way, borax. It is the sodium salt of boric acid. You can buy this substance at any pharmacy.

Cooking process:

Add 0.5 tsp to 200 ml of warm water. borax solution. Stir until the mass becomes homogeneous.
In 100 ml of warm water, add 30 ml of glue and a little dye. Mix.
Combine both masses and mix until smooth.

Store the prepared substance in a closed container away from sunlight and heating appliances. After playing with the “boron” slime, it is imperative to wash your hands and make sure that the child does not take it into his head to take the toy in his mouth.

Other options

For very young children, it is better to make this viscous toy from ordinary flour. Toddlers often like to lick their fingers and put their hands in their mouths, so slimes based on shampoo, baking soda, and other ingredients can be unsafe.

Cooking:

Sift 2 tbsp. flour.
Add 50 ml of cold water and a little hot. Mix until smooth so that there are no lumps.
Introduce any food coloring.
Put in a cold place for 3-4 hours.

After the specified time, remove the mass from the refrigerator and knead it thoroughly with your hands. Now the toy can be given to the baby.

Another cheap way:

Dissolve 100 g of starch in 200 ml of water. The consistency of the mass should resemble jelly.
Add 100 ml of PVA glue.
Drop a little peroxide and gouache paint.
Mix. Too thick composition can be slightly diluted with plain water.

The use of hydrogen peroxide makes the toy light and airy. Lizun is very convenient to store in a small jar with a closing lid. In the open air, the mass dries quickly and loses its elasticity.

What is the best glue to use

It is most convenient and safest to use ordinary PVA glue. However, if for some reason it is not at hand, you can use a glue stick. The rod must be carefully removed, transferred to a glass container and put in the oven or microwave so that it acquires a viscous consistency. After that, the mass is used according to the recipe.

To make the mixture softer and more elastic, it is recommended to use Titanium glue. However, during the manufacturing process, you need to monitor the consistency: a large amount of glue will make the toy too elastic.

You can experiment endlessly with the composition of the mass. If it doesn't work the first time, don't fret. To increase elasticity in the slime, you need to add 2-3 drops of vinegar, slipperiness - glycerin, airiness - hydrogen peroxide. To make the toy smell pleasant, it is advisable to add a little essential oil with a pleasant aroma to the ingredients during the cooking process.

Making your own slime is very easy. This toy perfectly develops fine motor skills, has a beneficial effect on the nervous system, perfectly relieves stress.

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Lizun, or as it is also called, handgam, slime, became a popular toy with children back in the 90s, when the movie Ghostbusters appeared. This hero could take any form, was slimy and not exactly pleasant to the touch. However, this fact did not bother the children, but the content of sodium tetraborate in a toy from the store stopped many parents from buying. Did you know that it is very easy to make such a toy with your own hands? Numerous videos will tell you how to make slime without sodium tetraborate. You can learn this secret from this article.

How to make slime at home

There are many ways to make slime from improvised materials at home. For its creation are mainly used:

water,
shampoo,
paper,
soda,
starch,
flour,
persil,
boric acid,
baby powder.

Thanks to the fact that you yourself create a toy, you will be able to control the entire process and composition of the product, giving it the color and size that you see fit. Your child will like this activity, and by teaching him the basics, you can get a few minutes of free time while the baby tries to create his own slime on his own.

From water and shampoo

A homemade lick is easy to make with water and stationery glue. How? Yes, very simple. The instructions below will guide you through this process. To get started you will need:

PVA glue - 100 g;
any dye of the shade you need (gouache, brilliant green);
room temperature water - 50 g.

For cooking:

Pour water at room temperature into the prepared dish.
Add glue. Please note that the thickness of the slime will depend entirely on the quality as well as the amount of thickening adhesive.
Pour out the entire vial of sodium tetraborate solution, add a little dye here.
Take a plastic bag and pour the mixture into it. Thoroughly knead all the components.
Your handgam is ready!

Lizun from shampoo without PVA glue is easy to make, but requires more careful storage. To create it, you may need:

shampoo - 50 g;
dishwashing detergent - 50 g.

For cooking:

Pour both products into the prepared container and mix. Please note that the color and consistency will depend entirely on the selected components. If you need a clear slime, then shampoo with dishwashing detergent should be appropriate.
Mix the ingredients and put the mixture in the refrigerator for a day. You can play with the new toy the next day.
Handgams need to be cleaned after games in the refrigerator. Get rid of it as soon as a lot of dirt and dust sticks to it.

From plasticine

A plasticine handgam, which is done quite simply, can become a great toy for a child. You will need:

gelatin - 1 sachet;
a piece of plasticine;
water;
plastic bowl;
metal container;
mixing spoon;

For cooking:

Add gelatin to cold water, leave for an hour until completely dissolved in a metal bowl. Proportions are often indicated on bags of gelatin.
After an hour, put the bowl on the stove and wait for it to boil.
Take a piece of the selected plasticine and remember it in your hands.
Pour warm water (50 g) into a plastic container and mix thoroughly with plasticine until a homogeneous mass is formed.
Add the already slightly cooled gelatin to the plasticine and mix thoroughly with a spoon.
Handgum will be ready to play as soon as it cools down. Today you learned how to make slime without PVA glue.

From paper

For some reason, many people believe that if a toy is made by hand, then it is imperative to use paper for it. Hendgam is unlikely to have paper sheets in its composition. Otherwise, how would it then stretch and stick to everything it touches? Let's open a secret for those who believe that anything is made of paper: it is impossible to make a sticky toy from this material. The only thing that can bring you closer to a paper slime is its picture drawn on a sheet.

From soda

You may not believe it, but the colored slime that kids are used to calling slime is easy to make with baking soda. Such a toy becomes an indispensable assistant if you need time for household chores, as the child will definitely be carried away by it for a long time. When creating, nothing needs to be glued, sawn or cut. Just mix the necessary ingredients:

PVA glue - 50 g;
water - 100 g;
soda - 1 tbsp.,
dye;
mixing bowl;
spoon or mixing stick (rubber gloves if doing this by hand).

For cooking:

Mix half of the water with the glue in a separate bowl. Feel free to add the selected dye here.
Dilute the baking soda with the rest of the water.
Combine both solutions and mix well until a homogeneous mass is formed.
The toy is ready, and your baby is happy!

Please note that such a lick is stored for no more than a week. With an intensive game, it is advisable to change the handgam to a new one after 2-3 days.

From starch

Another simple way to properly make slime without sodium tetraborate contains a minimum amount of ingredients:

water;
starch.

In this case, use potato or corn starch. For cooking:

Just mix the two components in equal proportions and add the dye you like. Even greenery will help you here.
Form a ball from the resulting mass and you can enjoy playing with the new slime.

How to care for a slime

In addition to the fact that you need to know how to properly make a slime without sodium tetraborate, care for this toy should be highlighted as a separate item. Slime often attracts dirt and dust, so after playing it is best to rinse it under running water. Make sure it doesn't get too hot. Some handmade slimes should be refrigerated immediately after playing. If you see that the slime has accumulated a lot of dirt and dust, then it is better to get rid of it and make a new toy for your baby.

Categories

Popular