What putty to choose. Experience with Weber Vetonit. How to independently choose the finishing putty vetonit and use it in repair work Finishing putty weber vetonit

In order to embellish the walls of your apartment, you should use high-quality finishing materials. Putty Vetonit will provide an excellent basis for their fastening.

Products Vetonit

An important part of the finishing work is the alignment of the walls. The quality of this task will depend on the beauty of the decorative elements, their ability to stay on the wall surface without damage. To do this, you will need putty, which will provide a flat surface for work.

Putty is one of the popular finishing materials that are widely used in construction. With this mixture, even a very uneven surface can be given a working look. Most often it is used together with a primer to ensure good adhesion of materials and create a stable base for further finishing.

Putty Vetonit is mainly used for work inside buildings.

The filler of this mixture is limestone, which makes up most of the mass, and the binder is a polymer adhesive. Thanks to this composition, you can create an even snow-white coating that will be convenient to paint or wallpaper. It is worth noting that the putty manufacturer has created many types of mixtures for various conditions of repair work. You can choose exactly the material that you need.

Brand Features

German building materials have always been of high quality and Vetonit is no exception. But, like any other material, putty has both advantages and disadvantages.
Advantages:

• low price;
• no additional layer of polishing is required;
• easy to use;
• suitable for use within 24 hours from the moment of mixing the solution;
• white color;
• There are special types of mixtures for different working conditions.

Flaws:

• putty does not get along well with moisture (the primed layer must be perfectly dry so that there are no unpleasant spots on the white base);
• since this type of finishing material is manual, it requires certain handling skills, otherwise the putty layer will not be so stable.

Putty of the Vetonit brand has certain technical characteristics, which, when used, may vary depending on the type of mortar:

1. Layer thickness from 1 to 10 mm.

2. Fraction: 0-0.3 mm.

3. Solution hardening time: 1-2 days (for all types).

4. Consumption of mortar: 1.2 kg per square meter with a layer thickness of 1 mm.

The main types of material and their features

Vetonit has several types of mixtures that should be used purely for their intended purpose. In other conditions, they will be unsuitable for work.

LR+ is a standard putty designed for leveling surfaces. It is used only in dry rooms, since the color of the hardened mixture changes at high humidity. An excellent choice for a finishing layer.

For rooms with high humidity, it is worth using a mixture of Vetonit VH. It is created on a cement base and can be used as an exterior facade finish.

Similar in characteristics is Vetonit TT putty. It also contains cement, but it is used to update the finishing layers and leveling of old surfaces, fireplaces, pipes and brickwork. Also, its technical characteristics differ from others in increased water consumption and a high hardening rate.

Vetonit VH is convenient to use before painting walls and facades, as well as when finishing bathrooms and rooms with high humidity. Other mixtures from this series, in addition to Vetonit TT, cannot be used in such conditions.

It is important to remember that most types of putty can be used in dry rooms, but for those where the humidity is high, only VH and TT mixtures should be used.

Using Vetonit, you can get a perfectly flat surface for further work.

During the repair, do not forget that many materials should be used, combining with each other. In this way, you can achieve the best finishing results and extend the life of the cladding.

Related posts:

Putty Vetonit - a popular material for finishing the premises

Dry mixes produced under the Vetonit brand have long become household names. If you want the repair in the room to boil, then you need to purchase finishing putty from a well-known manufacturer in our Standard Resource store. We offer to buy this finishing material at an affordable cost in any batch for both individuals and various construction organizations. At the same time, we additionally provide services for the delivery of Vetonit putty to anywhere in the Moscow region.

In order to prepare and level the enclosing structures of the premises at many objects, Vetonit putty mixtures are used. After they are diluted with water according to the instructions and applied to the surface, the hardened composition can be sanded. Thanks to this, walls and ceilings can be made perfectly smooth. At the same time, their noise-absorbing and heat-insulating properties still increase. The main purpose of Vetonit putty is to eliminate gaps and cracks after performing rough construction work.

The main types of Vetonit putty mixture and their distinguishing features

Putties of this brand, like other manufacturers, are based on cement, polymer and organic binder. Each type of this finishing material has its own distinctive features:

• The cement-based finishing mixture can be used not only indoors, but also for facade work. It is not affected by the level of humidity in the environment. You can use such putty on concrete, brick or plastered bases, but it should not be lime. The manufacturer produces the finishing mixture under the brand Vetonit VH.
• Polymer-based putty is used during the finishing of ceilings and walls of dry rooms. They can be further covered with wallpaper or covered with paint. The finishing solution is intended for application on plastered, brick, gypsum, concrete and other surfaces. It is produced by the manufacturer under the brand name Vetonit LR.
• Organic-based finishing mix for walls and ceilings, designed for use in dry rooms. It is a white solution in a diluted state. A feature of the mixture is the possibility of its use on surfaces made of organic materials. However, it is not intended for sealing joints between sheets of drywall. Also, it cannot be used as a base for tiles. The manufacturer called this putty Vetonit KR.

Customers of the store have the opportunity to purchase environmentally friendly putty products under the Vetonit brand in durable paper bags. At the same time, they must remember that before applying any type of putty, the surface to be treated must be cleaned of oils, dust and other contaminants.

Putty Vetonit is a building material used for interior work. It is suitable for finishing coating of walls and ceilings at objects with internal temperatures up to +10°С. In rooms with high humidity, this type of putty is not used. Also, it should not be used for processing seams, leveling floors, as an adhesive.

• Vetonit B based on cement is a waterproof finishing compound used for leveling walls and ceilings at objects with high humidity;
• Vetonit VX is a cement-based waterproof finishing compound designed for leveling ceilings, walls in wet rooms, and facades;
• finishing putty Vetonit KR - designed for leveling surfaces in dry rooms;
• composition Vetonit T - used for processing ceilings, walls in dry rooms;
• polymer putty Vetonit LR Fine - designed for rooms with a normal degree of humidity;
• putty based on limestone and white cement Vetonit VH - used for finishing ceilings, walls made of concrete, brick, expanded clay concrete, lightweight concrete, plastered surfaces. In addition, it is used for finishing facades and inside objects;
• Polymer putty Vetonit LR+ is intended for treatment of indoor surfaces with normal humidity.

Also today there are special Vetonit mixtures used for leveling the floor - Vetonit 1000, 1500, 3000, 4000, 5000, 6000.

Finishing putty Vetonit: features

1. This type of building material is used for processing walls, ceilings in dry rooms. It can be applied to gypsum, plasterboard, mineral and other smooth surfaces.

2. If the spraying method is used, then Vetonit putty, the price of which is acceptable, can be applied to porous boards, chipboard surfaces.

3. Vetonite, reviews of which are only positive, is not suitable for leveling surfaces; it is not recommended to glue tiles on it.

4. This type of putty should not be used in bathrooms and saunas. She can not seal the seams between the plates created from drywall.

5. The surface to be putty must be hard, free from dust, oily stains.

Vetonit: reviews

Advantages:

• thanks to this composition, it is possible to produce a final (finish) finish of ceilings, walls, to perfectly level the surface;
• Vetonite prolongs the "life" of any building materials;
• is moisture resistant;
• has good adhesion to the base;
• applied to almost any type of surface;
• dries fairly quickly.

Characteristics of Vetonit

1. Consumption of Vetonit putty is 1.2 kg/m2/mm.
2. In the process of leveling the walls with Vetonit, the temperature of the mass, the treated surface and the room should be from + 10ºС.
3. This building material is recommended to be used up within a day from the moment it is mixed with water.
4. The drying time of the Vetonit composition depends on the air temperature, ventilation in the room, and the thickness of the layer.
5. For 25 kg of dry mix, about 10.5 liters of water are needed. The drying period is 1-2 days.

Work with putty Vetonit

Before applying the putty (to improve the adsorbing properties), it is necessary to treat the walls (ceiling) using a primer. You can apply the composition of Vetonit manually or with the help of special equipment. The air temperature at the facility should be from +10 to +30°С.

For a batch of 25 kg, we need 10.5 liters of liquid. It is necessary to beat the composition until a thick homogeneous mass is formed. Then you need to let it stand for about 15 minutes, and then repeat the mixing again.

By following the rules of aging and kneading, the putty acquires an optimal structure for work.

Ready mixture Vetonit is applied mechanically or manually. After coating the surface with putty, it is necessary to wait until it is completely solidified, and then process it with sandpaper. After that, the walls can be covered with paint, wallpaper.

To improve the characteristics of the putty, it is recommended to introduce a primer solution of the same series into the mass.

After work, the container and tools must be washed under running water.

Notes:

• if large gaps are found on the surface, then before applying the putty they must be repaired with the help of special compounds;
• after that, the wall is cleaned of dust, dirt, and then primed;
• the primer composition is recommended to be applied with a soft brush, and then let it dry;
• when partially leveling the walls with Vetonit, a steel spatula 30 cm wide is used;
• if the ceiling is processed with Vetonite, then after spraying it is left without further processing;
• if the wall putty is carried out in 2-3 layers, then before applying the next one, you need to make sure that the previous one has dried;
• the finished surface can be processed not only with sandpaper, but also with the help of special sanding paper.

Putty Vetonit is one of the most popular mixtures used for leveling surfaces.

The range allows you to choose a mixture for different stages of finishing

Saint-Gobain is a company that has been producing building materials for many years. She began her work in the fifteenth century. Branches are scattered all over the world (their number is 1.5 thousand). The main office is located in France.

The corporation manufactures products in four directions, one of them is the manufacture of building mixtures.

In 1992, the company "Weber", engaged in the manufacture of building materials, joined the corporation. Today, Weber has 200 branches, which are located almost all over the world, including the Russian Federation. Manufactured goods meet international standards and have certificates confirming this.

Putty Vetonit, produced at the Saint-Gobain Weber factories, is a material that is suitable for almost all surfaces.

Positive features

Advantages of the Vetonit mixture:

• made from clean and safe raw materials (does not emit harmful substances, non-toxic);
• types that are resistant to moisture have been developed (also suitable for pools) - for this, when choosing, look for the letters VH, V or MT;
• the powder type consists of the smallest particles, so the surface is perfectly smooth;
• if a snowflake is drawn on the package, this mixture is not afraid of low temperatures and is used for facade decoration;

• enhances the noise and heat insulation properties of surfaces;
• if you carefully apply the finishing mixture, grinding may not be necessary;
• the diluted composition is suitable for a day;
• economically spent.

Kinds

Putty is presented in several types, having differences in composition and purpose. VH, V, TT - such marks indicate that the cement-based mixture is used in any room, as it is resistant to moisture).

Lr - finishing mix, intended for dry rooms. This is the most popular compound used for puttying surfaces that are going to be painted / wallpapered. The lr mixture consists of a binder (polymer adhesive) and a filler (limestone).

The composition of Lr is not waterproof, so it cannot be used in rooms with high humidity. As a starting putty for ceramic tiles and for sealing joints between sheets of plasterboard, it is also not suitable.

A mixture marked KR is used for finishing walls and ceilings. First, the starting VH is used, then the finishing one. Layer thickness - up to 3 mm.

Putty VH, which is based on cement, is used for facade work and indoors. With a mixture of VH, the walls for ceramic tiles are also leveled.

The composition with the letters TT is universal, it is used both as a starting and finishing finish. The filler is limestone and sand. Suitable for interior and facade work.

To choose the right putty, please note that lr is suitable for dry rooms, and VH for high humidity.

When using facade mixtures, the surface is pre-wetted with water so that the mixture clings to the base better.

Characteristics of putties Vetonit

Distinctive features:

• dry mixture from the company "Weber" comes to the shelves in paper packages (bags) from 5 to 25 kg, and ready-made in containers of 10-12 liters;
• binding ingredients: gypsum/cement/glue/lime;
• There are three types of purpose:

1. for leveling concrete surfaces before finishing;
2. for puttying joints between sheets of plasterboard;
3. for surfaces previously painted with putty;

• the mixture is presented in yellow, white and gray;
• the size of the granules of dry mixtures is 0.3-9.5 mm, and pasty - a maximum of 0.06 mm;
• dry mixes withstand 75 freeze/thaw cycles;
• pasty substances - 10 defrosting / freezing cycles;
• dilution: 300 ml of water per kg of dry mixture;
• during work, the air temperature in the room / on the street is from + 5 to + 25 degrees (for frost-resistant compounds, temperatures up to -10 are allowed);
• it is impossible to dilute the mixture again, as it loses its properties;
• if the binding component is glue, then the shelf life of the diluted solution is a day;
• one layer hardens within three hours, dries in a day;
• the thickness of the applied layer is from 3 to 5 mm;
• shelf life - 12-18 months.

How to use?

Take care of the base coat first. Remove any contamination from the surface, including oil stains (interfering with adhesion to the base).

Before you start puttying, make sure there are no drafts.

Dilute the composition with water (the proportions are indicated on the packaging box). After dilution, leave the mixture for fifteen minutes, then mix thoroughly. The shelf life of the diluted mixture is a day

Attention! Add dry mix to water, not the other way around. At the same time, keep in mind that the water temperature should be about twenty degrees.

The layer of putty should be no more than five millimeters. If you need to reapply a layer, then before doing this, you must wait until the first layer dries. Then it remains only to grind the dried surface.

The composition is applied manually or using automatic installations.

The manufacturer offers a video instruction on the use of Vetonit mixtures:

What to look for when choosing?

First of all, when choosing, pay attention to the purpose of the putty. Its characteristics must correspond to the construction work. For outdoor use, a composition that includes cement is suitable. All remaining mixtures from this company are suitable for interior decoration.

If you are going to level the surface (concrete, brick, wood), purchase a finishing compound. If you need to mask serious defects, then first use the cement, and then the finishing mixture.

If you need a composition for rooms where the level of humidity is high (pool, kitchen, bathroom, sauna), then purchase a composition based on cement (this substance tolerates moisture well).

If you are going to make a perfectly flat ceiling or walls in a room with a high level of humidity, then in this case also choose a composition based on cement.

We have to make repairs from time to time. And not necessarily in your apartment. Putty "Vetonit" will help to make it qualitatively. With it, you can level walls or painted surfaces, and then carry out or glue wallpaper. Let's plunge into the world of putty and consider several of its types:

VetoniteLR+

For 6 liters of water you need 25 kg of the mixture. Mix for two minutes with a powerful drill. 15 minutes the mass needs to settle. The solution is then remixed and used within three hours. The hardened surface can be painted. For this, alkali-resistant paints are used.

Vetonite vh

Finishing putty "Vetonit" is based on limestone. It is used for leveling concrete, expanded clay concrete, brick, plastered surfaces. It is suitable for both interior work and facade decoration. After its application, the walls are pasted over with wallpaper, painted or tiled.

"Vetonit" putty is applied in a thin layer of 1-2 mm. Its consumption is 1.2 kg per square meter of surface. The composition of the mixture is absolutely safe for humans. Before work, the walls and ceiling are cleaned of dirt, lime, grease, dust, paints and glue. If they are too dry, then Vetonit putty is applied to the surface treated with a primer.

For 10 kg of the mixture you need 3.5 liters of water. Mixing is carried out with an electric drill, then defended for 5-10 minutes. After repeated mixing, the solution is ready. Time of use of weight - 3 hours. After work, the surface should not be exposed to direct sunlight for three days.

We have considered only a few types of Vetonit putty. In fact, there are many more. All of them are 100% quality, easy to apply and excellent results!