Do-it-yourself hanging swing for a summer residence. Do-it-yourself garden swing made of wood for giving - everything you wanted to know! Do-it-yourself drawings of a garden swing made of metal

Everyone wants to have at their disposal a beautiful and comfortable corner for relaxation. For many, the dacha becomes such a paradise. How to arrange a summer cottage so that it always gives you a good mood? Let's fast forward to childhood for a moment. Remember how much pleasure you got from such a simple thing as a swing. They are fun for both kids and adults.

Making a swing for a summer residence with your own hands is not so difficult. If you have at least a little plumbing and installation skills, this task will not cause you much trouble.

Swing designs are very diverse. There may be both budget options, concocted from the remains of construction, and real masterpieces of architecture.

You can buy ready-made wooden swings for giving good quality at good prices at Kupistol.

Types of swing for a summer residence

• swing scales are a children's swing for a summer residence. The principle of the device is a board with two seats, in the middle there is a metal pipe on two racks;
• a simple swing with two ropes is the simplest design. A seating board suspended at two points;
• swing sofa on four ropes - the most common type of country swing. They are a bench with a back, suspended at four corners.

Swings can also be divided into stationary and portable. In the second option, the swing can be removed for the winter indoors, moved around the site at your discretion.

Swings can also be divided into stationary and portable.

Material for manufacturing

For suspension components, the following materials are used:

• rope;
• cord (rope for mountaineering);
• steel rope;
• a chain with a medium-sized link;
• steel bar;
• steel pipe.

For the manufacture of the seat, you can use:

• wood - boards, plywood;
• wood laid on metal corners;
• metal - rod, strips;
• plastic - for child seats.

Swing supports

Simple swings can be hung almost anywhere. Most often choose a strong bough. You can also fit a crossbar between two trees.

For a swing sofa you will need strong supports. They may be:

• wooden - two supports crosswise;
• metal - two supports dug into the ground or with a square frame at the bottom;
• metal - one pole, reinforced with a concrete screed.

How to make a simple swing in the country

The simplest option, which is perfect for children, is a simple wooden swing. If there are no suitable trees in the recreation area, you can build supports from four logs. We bury the ends of the support into the ground to a depth of about 70 cm, at the top we connect them with a stud or bolts with washers. Please note that the angle between the posts must be quite large for the stability of the structure. The fifth log will serve as the upper crossbar, we also fasten it with bolts. Using fasteners sold at any hardware store, we attach a rope to the crossbar (strong cord, metal cable). We make a seat from a board 30-50 mm thick, with the help of hooks we fasten the cord. The cord can be tied or special clips can be used. You can hang such a swing on four ropes. In this case, at the top, the cable is threaded into a hook or ring so that it does not slip, under the ring it is intercepted with a clamp.

You can hang such a swing on four ropes.

Wooden beam option

For the manufacture of such a swing, you will need a wooden beam and slats. Supports made of timber can withstand a load of about 150 kg

A wooden beam measuring 10x10 cm will increase the strength of the swing, but will lead to a heavier structure. It is better to use material with a section size of 5x10 cm.

We assemble the support from the beams, starting from the bottom frame. We calculate its dimensions by adding 40-50 cm to the dimensions of the seat. Vertical bars are attached to the frame, forming a triangle. From above, the structure is fastened with a vertical crossbar. All main fasteners are made using metal corners and self-tapping screws. For reliability, we attach another horizontal bar between the two racks of one side.

We make a bench, starting with the frame. Separately from the bars we make a frame for the back and for the seat. We fasten the material from which we planned to make a swing onto the frames. It can be a board, slats or plywood.

From above, the structure is fastened with a vertical crossbar.

We connect the finished back and seat together using metal corners. Before that, we determine the comfortable seat angle, on average it will be about 120 degrees.

We make armrests for the bench from rails, we also fasten them with self-tapping screws.

We hang the swing from the upper crossbar on a chain or a metal cable. Metal brackets or hooks are used as fasteners, we fix the chain on the back and on the swing seat with them.

The swing for the dacha is ready. The height of the swing is adjusted so that the legs of the person sitting on it reach the ground. Such a design can be easily transferred. When standing on the ground, the lower beam must be treated with a protective solution.

Swing for summer cottages made of metal

Such swings are more durable, depending on the design, they are designed for a weight of 300 kg or more, but they will be stationary. For manufacturing, you must have the skill of welding. If desired, a small swing of this type can be made mobile by expanding the distance between the lower ends of the supports and welding the base frame onto them.

For racks, choose one of the following materials:

• steel pipe with a diameter of at least 5 cm;
• metal channel or profile;
• steel corner.

Using welding, we connect the pipe, starting from the base of the structure. We get a rectangle, we put two triangles on it vertically, at the top we connect it with a horizontal crossbar. The cutoff angle of the pipe at the top junction of the sides of the triangle is 45 degrees. On the upper crossbar we weld loops from reinforcement.

For manufacturing, you must have the skill of welding.

A variant of the support design - without a lower rectangle. In this case, the racks must be buried 1 meter into the ground; if the swing is planned to be heavy, make a concrete screed.

We make the basis for the back and seat from a metal corner. We make two rectangles out of it, we connect them together at an angle of at least 100 degrees.

At the corners we weld loops for suspension. We cover all metal parts with a primer and paint with oil paint. We put a wooden board on the finished base; for convenience, it can be sheathed with soft material or linoleum on top.

We cover all metal parts with a primer and paint with oil paint.

Choosing a place to install a swing requires special attention. There should be enough space when swinging the swing. It is better to choose a shaded place, if you plan to build a gazebo, a swing can be installed inside it. Wooden products must be protected from moisture and precipitation. This can be done by treating the tree with special solutions, if the design of the swing allows it, paint it with paint.

Do-it-yourself swings will give your dacha a unique flavor, create an atmosphere of love and comfort. Have a nice holiday!

Video about a swing for a garden plot

Remember childhood sensations from the swing? This is not only pleasant, but also useful - monotonous rocking trains the vestibular apparatus, and also calms the nervous system. The second property is very useful in our time. Such a pleasant treatment-relaxation after a busy day. Moreover, any person with “straight” hands can make a swing with their own hands. There are, of course, complex models, but there are much more simple ones.

About designs

Like most outbuildings, swings are most often made of wood. Racks and crossbar - from timber, logs, seats - from planks and even from parts of home furniture.

A little about designs. There are three main types of hanging swings, or as they are also called - boat swings, sofas, benches, etc. The main difference is in the type of support structure: there are A-shaped and U-shaped. You see an example with racks folded into a triangular structure above, and in the photo below an example with a U-shaped rack. This is more likely with a hanging bench and it is built according to the same type, only taking into account swinging loads.

There is a third type - this is already a complex structure that requires certain skills - it is based on articulated joints and they swing from their feet to the floor. We will immediately give both photos and diagrams for those who wish (you can expand it to full screen by clicking on the arrows in the upper right corner of the picture).

We make a swing with our own hands from wood

Most often, they independently make a design in the form of the letter "A". It is simpler, requires less material consumption. We will analyze the nodes, fasteners in more detail, talk about materials, protection against destruction and stability.

materials

Immediately about what to make a wooden swing from. The choice of lumber section depends on the planned load. If it is assumed that one adult will sit, the uprights and the upper crossbar are at a minimum - 50 * 70 mm. If a larger number of "seats" is supposed - two or three, then the cross-section of the beam is at least 100 * 100 mm, better - 100 * 150 mm. It has been experimentally established that such a design, when using a beam of 100 * 100, normally withstands a total load of about 200 kg. If you need more - take a larger section, or put logs))

About what the bench / sofa is made of. A bar 70 * 40 mm will go to the frame, the back height is at least 600 mm, the seat depth is at least 480 mm. You can experiment with the depth of the seat and the angle of the backrest: there are options for a “lying” position. Accordingly, both the length of the sofa and the dimensions of the structure change greatly from this. For fastening use nails 200 or studs at least 10 mm in diameter.

How to position the racks

Scheme with dimensions and a list of the required material in the photo below. To be frank, few people make from such materials as indicated in the specification. More often they put a bar.

There are varieties of this design: with or without a lower frame. If the swing is installed on a hard platform and the fasteners are made rigid, on studs, without the possibility of play, then such a design will stand without problems. If in doubt, you can make a screed from a bar along the bottom, nail it with studs to the coating, or drive the staples into the ground.

A crossbar has been added here, there is nothing to move apart The simplest design, but the “legs” can move apart

For those who are afraid of lateral loads - the design in this axis is not the most reliable - we can offer to install racks with a slope. The area will be large, but the stability will be high.

If installation in the ground is intended, parts of the posts that will be buried must be treated with bio-protection. As a cheap option, put it in a vessel with used oil for several hours. Dry, then bury. They bury to a depth of at least 50 cm, pour a little rubble on the bottom, set up racks and concrete. If you are afraid that this is not enough, attach a few strips of metal crosswise at the bottom. The hole will have to be dug larger, but the holding area will be larger.

Ways of fastening the crossbar

In all swings of this type - with racks sawn at the top with bars - the problem is the attachment of the crossbar, to which the bench is then hooked. In the photo above, it is solved reliably, although not entirely aesthetically pleasing. The trouble is that aesthetic methods are difficult to perform. And, if you are not for sale, it's faster to do something inelegant, but reliable. So, in order to fix the crossbar, an overhead beam is attached below the intersection, pulled to the uprights with studs. A cross member rests on it, which is held from lateral shifts by racks and fasteners - nails and spikes.

Another way to install the crossmember is to mount the side racks in the form of the letter "X". With this option, the carrier beam fits perfectly. It is additionally fixed with nails, and the racks are pulled together with studs. See the next photo for this.

Everything is fine, but the length of the sofa is not enough ...

By the same principle, a do-it-yourself swing is assembled from logs: the side ones are fastened crosswise, and a support log is laid on top. If the timber is sometimes assembled on nails, then in the case of logs, studs are mainly used.

For those who are familiar with carpentry, there are other options: half a tree. Such a project is in the photo gallery below with close-ups of some of the key nodes.

How the racks are fastened together - inside view

Photo gallery of homemade swings on chains

And a few photos of different swings made on the basis of an A-shaped design.

From thin logs under a reed roof - it looks great Chic option - 3-seater, or maybe more, a swing manufacturing This is a whole swing house .... cool Immediately and a ladder ...

Fastening the swing to the crossbar

The swing mount also requires clarification, that is, it is not obvious to everyone how to hang a bench-sofa on the crossbar. First, the crossbar is drilled from the bottom up through. A bolt is passed through the hole, to which the eye nut is attached. One or two wide washers are placed under the nut head so that it does not squeeze under weight.

It turns out that the eye-nut ring is located at the bottom. You can attach a carabiner to it, throw a rope or cable, etc. Just note that the carabiner should hang normally, freely on the eye-nut ring. And in the carabiner, two links of the chain should fit freely. Therefore, it is advisable to buy everything together in one store: you can try on the entire knot at once.

By the way, in the rigging store you can stumble upon other devices that can be adapted for attaching chains or ropes from the swing seat. For example, such as in the photo below.

They are designed to lift loads from 0.5 tons, so it makes no sense to use them for children, but on a swing for adults - quite.

Such a mount has a significant minus - a creak is heard when swinging. For a while, you can get rid of it by lubricating the knot, but this operation will have to be repeated periodically. The way out is to make a knot on bearings, but you can’t do without welding.

Do-it-yourself metal swing

Their structure is exactly the same. The material is different, and the way it is attached. This is welding. For those who are familiar with, it will not be difficult to cook something similar. And for inspiration, a photo report.

Below is a drawing of this swing with dimensions. Some explanation is required. In the figure there is a pipe welded around the perimeter (this plane is shaded). It is buried and therefore not visible in the photo. It was made in order to increase stability: the masses of friends are considerable. For the same reason, metal plates are welded onto the ends of the racks. The installation was complicated, but the swing is tight.

For manufacturing, it took 22 meters of a profile pipe 50 * 50 mm, for a seat 25 * 25 mm - 10 mm, boards 2000 * 120 * 18 - 7 pcs and the rest - fasteners, paint, anti-rust.

There is another way to attach the swing to the crossbar. He is in the photo.

A way to make a metal swing mount to the crossbar

The original form of a swing from a profile pipe - the racks are non-linear, but curved. If it is possible to do this with a tree, then only the master.

Baby swing

For children, you can make the same design, but smaller.

There are several other models for , but about . Here are the first ones - a swing-scale or a balance beam.

Swing for children - balance beam or scales

Everything is clear, questions may arise only on the attachment point. Below is a drawing with dimensions. To strengthen the upper part, steel plates are fixed inside. To make them swing, a hole is drilled into which the pin is threaded. You can improve the "rolling" by inserting bearings.

You can quickly and easily make a nest swing from a tire (car tire). Bolts with eye nuts are installed in it at four corners, but of a smaller diameter (do not forget about the washers), ropes or chains cling to them, and you can even throw them on the corresponding branch on the tree, even hang them on the horizontal bar.

How to make creative do-it-yourself swing: this will be discussed in this article on the site "" and drawings and photos will help you with this. Comfortable conditions for relaxing in the garden of a private house or in a summer cottage can be achieved in different ways. Along with and , not the last place is occupied by garden swing: photos of interesting solutions can be easily found on the net, and using the instructions, you can easily cope with the manufacture do-it-yourself swing. Even adults can use these swings. The main thing is to accurately calculate the weight and build a reliable structure.

Swing, located on a personal plot, will become a source of good mood for both children and adults

Do-it-yourself swing: photos of interesting ideas

Traditional materials for manufacturing do-it-yourself street swing are metal and wood. In order to improve reliability and external characteristics, these materials can be combined, as well as partially decorate the metal structure with decorative forging.

Bright cocoon swing hanging from a tree branch

Helpful advice! For the manufacture of the seat, any improvised materials that may remain on the site after building a house or carrying out repairs can be used.

For construction, you can use:

• bars;
• plastic;
• strong rope;
• metal pipes;
• old armchairs or chairs from which the legs must first be removed.

Comfort swing great for sleeping outdoors or reading

Car owners can use old car tires. They will go well with flower beds made of similar material.

Garden swing classification

There are many original and comfortable swing capable of any suburban area.

They can be roughly divided into three broad categories:

• mobile - products have a lightweight portable design, due to which swing you can move around the site to any convenient place, for example, to a house, to, to a gazebo or under a canopy during rain;

Mobile swing option with metal base

• family - products with a massive and weighty design. In their design, they resemble without legs with a large and high back. Due to the large dimensions, the whole family can fit on the seat. To exploit such swing was safe, they are securely fixed on the U-shaped frame. Strong cables or thick chains are used as clamps. If you organize a roof or an awning over the swing, they can be used even in the rain;

• children's - a special category of products, usually in the form of boats or hanging chairs. Special requirements are put forward for structures in relation to the frame, which must comply with all safety standards. Very young children can use swing only in the presence of adults and with the use of special belts. With their help, the baby is fixed on the seat and therefore will not be able to fall out.

With metal frame, painted in bright colors

Varieties and photos of swings in the country with their own hands

Swing can be classified according to other criteria. There are the following swing types by design type:

• hammock - hung on a metal crossbar. A tree with a thick and straight lower branch can serve as a substitute for the crossbar. During the use of such a design, a person gets the impression that he is hovering above the ground. Similar swing are in great demand among those who are fond of reading books;

Hammock swing– a great option for relaxation and admiring nature

Note! Hammock products, subject to the manufacturing technology, are able to withstand a weight load of up to 200 kg.

• single - products with various types of structures that do not need to install additional crossbars. These swing They are characterized by a quick mounting system, and they can be installed anywhere. A variety of materials are used for the manufacture;

Beautiful hanging swing in the garden private house

• hanging - swing are a seat suspended on several ropes or chains. Ropes are attached to the sides. Thanks to the use of various materials that make the product durable, comfortable and light, the hanging type swing can have a different shape and size;

Cozy fabric hanging swing, created do it yourself

• sun loungers - products can accommodate a family consisting of two adults and one child. Swing have a special design that involves fixing at a single attachment point, which allows them to be installed in the room. The material for the manufacture is a special alloy of metals. Despite the apparent airiness, these products are very durable.

Large family swing with metal frame

Before you get down to business, you should prepare the necessary materials, as well as tools.

Make sure you have:

• file or sandpaper (for working with a metal surface);
• welding machine;
• electrodes;
• containers for mixing the solution;

metal swing distinguished by elegance and apparent lightness of design

• ingredients for the preparation of the solution (crushed stone, water, cement, sand);
• fasteners (nuts, bolts);
• metal pipes;
• wrenches and shovels;
• grinders and a set of discs for metal.

Modern design metal swing for garden

Making a swing with your own hands: drawings and photos

The first thing to do is prepare the pipes. The cutting of the material is carried out as follows:

• side stand - 2 pieces, length - 2 m;
• base element - 2 pcs. on each side, the length is up to you;
• crossbar - 1 piece, length - 1.5-2 m.

Mounting dimensions metal swing and wood

Helpful advice! After cutting metal pipes, burrs may form on them. Use a file or sandpaper to remove them.

The elements intended for the base must be fixed by welding at an angle of 45°. Next, a crossbar is welded to the uprights at an angle of 90 °.

To install the structure, two trenches should be dug. The width of these recesses must correspond to the tripod resulting from the assembly, and the depth must be at least 0.8 m. The width of the crossbar must fit between the trenches.

Hanging swing unusual shape with a metal frame

The supporting parts of the swing will be installed in the recesses. Previously, a pillow of sand should be formed at the bottom. The layer thickness is 0.1-0.2 m. After that, the embankment is carefully compacted. The base of the structure is installed on top, the recesses are poured with concrete mortar.

To prepare the mixture, mix sand, cement and crushed stone in the following proportions: 2:1:1 (respectively). Add liquid to the resulting mixture and mix the solution. As a result, you should get a homogeneous mass. Make sure it's not too liquid.

Drawing device garden swing: 1 - screws for fastening the back and seat slats; 2 - slats; 3 - corners of the rocking seat frame; 4 - swing truss base rod; 5 - rivets; 6 - connecting strip of seat stiffness and seat suspension; 7 - side bars of the swing farm; 8 - connection of the ends of the supporting frame of the awning; 9 - cord for hanging the rocking chair; 10 - carbine; 11 - ring; 12 - kerchief-strut; 13 - the upper bar of the swing farm; 14 - connecting bolts with washers and nuts; 15 - liner fixing bolt; 16 - insert with a hole and an internal thread for a connecting bolt; 17 - wide spacer; 18 - support frame for awning; 19 - washer; 20 - a bolt connecting the upper rod with the side ones; 21 - crossbar - 2 pcs. (steel strip with bolts)

It takes about a week for the concrete to harden. Up to this point, it is not recommended to attach a seat to the crossbar, which can be held by cables or metal beams. After making sure that the mortar has hardened, attach the hooks by welding and install the seat on the cables. If metal beams are used, weld the seat to them. When the structure is completely ready and installed, it can be covered with paint to give the swing a beautiful appearance and protect the metal from corrosion.

Metal swing for the garden with awning and soft pillows

How to make a swing in the garden with your own hands from wood

This technology is considered, which are able to simultaneously accommodate several babies at once. The dimensions of the swing can be changed at your discretion.

Helpful advice! Use wood of the following species as a material: birch, pine, spruce.

Children's outdoor swing built from wood

Preparatory stage: tools and materials

The list of materials needed to create a wood structure includes:

• board - 15 pieces, length - 2.5 m, section - 2.5x10 cm;
• board - 1 pc., length - 2 m, section - 5x15 cm;
• carbine - 6 pcs.;
• self-tapping screws - 250 pcs., size - 3.5x52 mm;
• welded chain, the length of which is selected taking into account the height of the swing, the thickness of the links is 0.5 cm;
• galvanized screws - 2 pcs. size 1.2x10 cm + 2 pcs. size 1.2x8 cm.

Do-it-yourself drawing-children's swing: 1 - lateral outer part of the seat frame - 2 pcs. (90x35x375); 2 - lateral inner part of the seat frame - 2 pcs. (70x35x375); 3 - cross member of the seat frame - 2 pcs. (90x35x375); 4 - vertical part of the armrest - 2 pcs. (45x35x275); 5 - vertical part of the back - 2 pcs. (90x35x650); 6 - horizontal part of the armrest - 4 pcs. (45x35x530); 7 - the upper part of the armrest - 2 pcs. (145x20x585); 8 - upper chain holder - 2 pcs. (45x35x300); 9 - lower chain holder - 2 pcs. (70x35x150); 10 - front and rear parts of the seat frame - 2 pcs. (90x35x1300); 11 - backrest cross member - 1 pc. (90x35x1400); 12 - seat board - 1 pc. (90x20x1170); 13 - seat board - 3 pcs. (90x20x1230); 14 - back board - 12 pcs. (90x20x850)

The market assortment offers self-tapping screws of various colors. The shade of the fasteners can be effectively played up in swing design, so you should pay attention to the color of the screws. By choosing fasteners to match the wood, you can hide the junction of structural parts. Self-tapping screws in contrasting colors will achieve an interesting effect.

Hanging wooden swing, painted white

Don't forget to prepare the tool:

• roulette;
• pencil;
• square to measure the size of the corners;
• circular saw for cutting wood;
• drill and a set of drills for it;
• planer and hacksaw;
• a hammer.

Scheme-drawing wooden swing devices with dimensions

Technology for creating a children's swing: how to make a design with your own hands

If you take on DIY swing making You can make your work easier in one simple way - make a plan and try to stick to it. It is recommended to prepare a project in advance, draw up blueprints and outline on them all the dimensional parameters, fastener locations, analyze the future product for reliability.

If you are not experienced in drafting drawings, use ready-made projects. , which you can find on the Internet, will help you decide on the choice of a suitable design. Do not forget, there is a big difference between a swing designed for adults and children's products.

Suspension swing option from used car tires

On pre-prepared parts (each 1.5 m long), a cut should be made strictly at a right angle. Boards having a thickness of 2 cm are designed for seating. For the manufacture of the back, it is better to use boards with a thickness of 1.2-1.3 cm. For the seat, 32 planks will be required, 15 of which should have a length of 0.45 m, the remaining 17 - 0.5 m.

Helpful advice! To prevent cracking of the wood during the installation of self-tapping screws, drill small holes in the structural elements to be fastened.

Mounting swing dimensions with metal frame

Working with the back and seat of the swing

If you want to make a more comfortable and convenient design of the seat back, it should be shaped. To achieve the desired result, use a board with a large thickness (section - 5x15 cm). You need to make 6 parts. Use a marker or pencil to mark the blanks accordingly.

After that, you need to determine the angle at which the back will be fixed. Fixing the slats is carried out with the same step. Make sure the planks are level. To do this, first fix on the sides, and then in the middle.

Baby swing suspended from the frame on chains

Increase operating comfort swing allow the installation of armrests. It is recommended to use a bar for these purposes. The width does not really matter and is selected according to your own wishes. On the one hand, the armrests are screwed to the frame part of the back, on the other hand, they are attached to the seat.

The next step is to attach the welded chain to the frame. The optimal place is the lower zone of the armrest, that is, where it connects to the seat. Take a special connector, which has a ring on one side and a thread on the other. It is attached to the crossbar and the frame part of the seat. Subsequently, a chain will pass through these rings.

Drawing of a chair with a back and sides for a swing(cm): 1 - horizontal sidewall element - 4 pcs. (5x5x70); 2 - connecting rod - 3 pcs. (d = 2.5 cm, length 80 cm); 3 - reinforcing square - 4 pcs. (2.5x10x10); 4, 11 - vertical elements of the sidewall - 4 pcs. (5x5x37.5); 5 - back frame element - 2 pcs. (5x5x37.5); 6 - back and seat lattice element - 13 pcs. (d = 2.5 cm, length 58 cm); 7 - seat frame element - 2 pcs. (5x5x67.5); 8 - suspension cord guide - 2 pcs. (d = 2.5 cm, length 10 cm); 9 - pin - 4 pcs. (d = 1 cm, length 7 cm); 10 - seat latch (d = 2.5 cm, length 68 cm)

For fixing swing it is better to use an A-shaped rack. As supporting elements you need to take strong logs. Anyone who knows how to handle a welding machine can take on the manufacture of a metal frame.

Bright children's swing with original design

Do-it-yourself construction of a supporting part for a swing

Many craftsmen who swing making for summer cottages, A-shaped racks are preferred, as they provide a high level of reliability, are durable and can withstand heavy loads. At this stage, you will need the same set of tools as when working with the seat. Of course, if we are talking about a rack made of wood. Otherwise, you will need a welding machine.

A-shaped support legs are reliable, durable and can withstand heavy loads

The first thing you have to do is make racks. They must be the same and have the same size. Subsequently, you can install them at the distance that you need. This figure depends on the width of the seat. To connect the supports, use the crossbar.

Important! Perform accurate calculations of the angle at which vertically positioned rack elements will be connected. The upper part of the pillars needs a secure fastening. Otherwise, they may be led.

Reliable fastening of the upper part of the pillars will ensure a high level of strength of the entire structure

To mount the crossbar, mark 1/3 of the support posts. It is at this level that the installation will take place. Self-tapping screws and corners made of metal can be used as fixing elements. Make sure the crossbar is set at the same height. Usually swings have one crossbar, but if you want to increase the strength of the structure, you can install two.

To mount the base, dig holes in the ground. The maximum depth is 0.8 m. The structure is installed on a cushion of crushed stone with a thickness of about 0.2 m. After the racks have been placed inside, they are poured with concrete mortar.

Baby swing hanging type with wooden frame

Given that wood is highly susceptible to decay, the underside of the posts should be treated with an antiseptic and insulated before concrete is applied to the base. For these purposes, it is worth stocking up with waterproofing material. Roofing material will do.

Since in the future the structure will be operated by children, it is necessary to secure it. Sharp corners should be rounded off, irregularities and burrs are eliminated by grinding.

Process construction of a children's swing wooden

DIY swing photo and features of their manufacture

Even if you are not at all friends with a planer and a welding machine, this does not mean at all that a swing in a summer cottage will remain a luxury for you. There are many simple designs that you can handle. Moreover, most of them do not require the purchase of any expensive materials. You can always arm yourself with improvised means.

Simple children's swing for the garden hanging on ropes from a tree branch

Swing from improvised materials: pallets

Pallets are a very popular type of material from which home and garden furniture is made. Due to their versatility, they can also be used for swing organization in the countryside. To do this, you should have at hand one pallet, a rope and a tree where the structure will be suspended.

Helpful advice! As a substitute for a tree, you can install strong support poles.

Pallets are an excellent material for creating original garden furniture.

Even a product created on the basis of a single pallet can have several modifications. The one-piece element can be fixed in a suspended state at four corners using ropes. This is enough for the swing to perform its function. To create coziness, it is enough to put a small mattress on top of the pallet and cover it with a blanket or sheet. A few pillows on top will be a kind of solution to the problem of the lack of a back.

Cozy children's swing from a pallet with a soft mattress and pillows

Constructions of this type can be used not only for reading books in the open air, but also for elementary rest from the midday heat in the shade. They can even be used for sleeping.

For creating a swing with a full back with your own hands two pallets are required. As in the case of wooden structures made of planks and timber, here you should also sand the surface to get rid of burrs. The product must be thoroughly cleaned and painted with a dye intended for wood and outdoor conditions. It is enough to use a moisture-resistant varnish that will not spoil the beauty of the tree.

Suspended swing for giving made from pallets

Other types of do-it-yourself swings

The simplest version of a swing is a board-shaped seat suspended with ropes. To prevent the rope from fraying quickly, two more parts can be nailed to the sides of the board. After that, 4 holes are made through which the ropes are threaded. For fixation, strong and tight knots are tied at the ends. The structure itself can be mounted both on a tree and on a U-shaped support base.

Beautiful hanging swing will become a decoration of the backyard

Swing, suspended on ropes, can be made in another way. Instead of holes, grooves are formed in the board: a pair in the end part and a pair along the edges in the corner zone. The seat (board) can be shaped like a semicircle or left straight. Due to the tension force, the rope will not jump out of the grooves, despite the fact that they are open.

Safe baby swing from textiles and wood you can create with your own hands

Helpful advice! If you have an unusable skateboard or snow board, it can be used instead of a seat, giving the swing an original look.

For making swings with your own hands on the site you can use a large number of different materials up to car tires. It is enough to hang the tire on a tree branch with a rope. If you care about nature, you should not use a chain - it injures the bark too much.

Hanging swing from a wicker chair adorned with colorful ribbons

Some craftsmen give intricate carved shapes to tire swings. To obtain an original design, it is enough to acquire a sharp cutting tool and ready-made schemes. Tire cutting can be done with a construction knife. Pre-mark the cut surface on its surface using chalk or a dark marker. The finished product can be painted in a bright color or covered with drawings.

Swing from two logs small size, interconnected with a rope, very popular among summer residents. The main thing is that the wood is cleaned, leveled and tightly bound.

Swing Creation Drawing in the form of a horse from an old tire

Beautiful designs and methods of fastening them

There are several options for mounting systems that can be used for swings. These options are the most common:

• carabiners - in this case, the beam is wrapped around an element that has a circular cross section (used for rounded beams) or rectangular (square shape of a carabiner for beams);
• anchors - in fact, they are the same carabiners with a through type of fastening.

Reliability and safety of the structure are the main properties of a good children's swing

Swing with four attachment points(2 on the seat and 2 on the back) can be hung in two ways. In the first case, you bring chains or ropes into a common ring, which is a connecting carabiner. After that, one of the ropes or chains is attached to the crossbar with the main carabiner. As a result, you get two fixation points on the crossbar.

Another option involves the installation of a fastening system, which is based on the use of 4 carabiners that fix each of the ropes or chains leading from the structure.

Device options seats for swings, as well as the method of attaching anchors to the crossbar

Swing in the form of benches can be mounted on hooks that are mounted in the side walls of the supporting pillars.

Materials for creating a beautiful swing for children in the country with their own hands

If you do not want to be limited to the use of improvised materials, but want to create an original and beautiful design, you can use interesting types of wood and metals.

Helpful advice! Enhance the product by adding a comfortable back or front bar to its design. Thanks to this limiter, you can increase the level of operational safety of the swing.

For outdoor hanging swing it is better to choose boards from deciduous trees

To create a beautiful swing you will need:

• durable metal carabiners;
• boards from deciduous trees;
• chain for hanging;
• self-tapping screws with various dimensional parameters;
• screws equipped with rings, which are also used for hanging home children's swings installed in the room.

Comfortable children's swing hammock type of thick colored fabric

The set of tools for work is limited to:

• drill and a set of drills;
• saw and hacksaw;
• jigsaw and planer;
• hammer;
• devices for measuring and marking (square, tape measure, chalk, pencil / marker).

Ordinary old tires can be turned into an original swing for children

For swing mounting you need to select a shady place, for example, a plot under a tree or under the roof of a canopy, terrace. You can even equip the structure itself with a roof or canopy, otherwise you will have to cover the product with a tarpaulin or film in bad weather.

The initial stage of product manufacturing

Any sustainable swing design begins with the digging of support pillars to a depth of 0.8 m. The remaining space in the recess is filled with concrete mortar. Then the crossbar is connected to the uprights.

Wooden swing device: 1 - upper bundle (length 115 cm, width and thickness of the board 10x5 cm); 2 - a visor board that covers the heads of the bolts and protects the screed from the weather (length 145 cm, width and thickness 22.5x5 cm); 3 - two posts (height 275 cm, width and thickness 22.5x5 cm), the distance between the posts is 105 cm, the ends of the posts are concreted into the ground to a depth of 60 cm; 4 - galvanized chain attached from above and below to eyebolts on turnbuckles; 5 - seat (length 60 cm, width and thickness 15x5 cm)

Further actions depend on what type of material is used to manufacture the product. If a swing are created on the basis of metal pipes, the connection of all elements is carried out only using a welding machine. Wooden supports will require pre-treatment with an antiseptic and nuts with bolts as fasteners.

The seat is made up of two frames. One of them will be the back, the second - the seat. Install and secure pieces of plywood or wood on them. After that, it will be necessary to fix the frames at an angle of strictly 120 °.

Process construction of a children's complex with swings wooden

In order to attach a rope or chain to the seat, brackets or special hooks are mounted. This will allow you to hang the structure to the crossbar.

Note! The swing is suspended in such a way that the legs of the person sitting on it can touch the ground.

The design of the structure can be improved by decorating it or installing some unusual object as a seat.

Baby swing hanging from a tree on a rope

Do-it-yourself installation of the mounting mechanism on a swing

Hanging the swing seat to the crossbar is carried out due to staples or special hooks. If the structure is held by cables, you will also need to purchase clamps that will act as clamps. Other materials may also be used, such as chains or ropes.

It is recommended to take a chain with large links. This will increase the service life of the product due to the fact that the metal from which they are made is not afraid of the negative effects of weather conditions and temperature changes. Moreover, the chain is often used to decorate the landscape. It will complement the design of the yard on a suburban area.

Installation of fasteners for hanging swings

The mounting area of ​​the suspension requires careful reinforcement. For decorative purposes, pillows, a mattress, or an awning can be placed on a wooden seat. These elements will not only be able to decorate the product, but also increase the comfort of use, make it pleasant to relax.

Since the design is made for children, it is better to equip the swing seat with a comfortable back. As for the suspension, it is less important in this case.

Scheme-drawing hanging swing devices from a car tire on a metal frame: 1 - racks; 2 - tire; 3 - welded calibrated chain; 4 - M12 bolt with an eye; 5 - section of channel No. 14, the length of which is 200 mm; 6 - steel plate 140x200 mm; 7 - M12 bolt

How to make a DIY swing safe

The area where children rest and have fun should be safe. By following simple rules, this can be easily achieved:

• use the safest and most reliable nodes;
• nylon rope is less damaging to the tree than others;
• the best option for wood is oak;

Children's swing made of wood, created by own hands, in the form of a mouse and a beetle

• having figured out how to make a swing in the country, before fixing them on a tree, carefully examine the branch on which they will be hung. Make sure there are no cracks, excessive dryness, signs of illness;
• if a chain is used to hang the swing, it is recommended to place it inside the plastic tubes. Otherwise, the child's fingers may fall into the links;
• the branch with the swing should be checked for reliability, since during the use of the structure, the wood is gradually frayed and destroyed. You need to do this every week;

Before use swing children, be sure to check the design for strength

• before allowing children to use the product, check it for durability. For this fit the largest member of the family. If the swing can withstand its weight, then they can be put into operation;
• use only reliable variants of carabiners.

We should not forget about the aesthetic side of the issue. Make the sides of the swing curly to keep the kids interested. Sidewalls can be made in the form of dinosaurs or cars, ships.

Dachas today have ceased to be exclusively garden objects. They are increasingly purchased for a pleasant pastime. This gave rise to a new vision of the design of their territory.

Types of swing

Structural diversity

Garden swing for the whole family

What can you make a swing with your own hands

Where to put a swing in the country

Swing as a stylish addition to a stylish landscape

A few ideas on how to make a swing with your own hands

Swing in the country: features of care

Conclusion

Photo gallery - country swing

Much attention is now paid not only to the construction of comfortable houses, but also to the arrangement of relaxation areas. Along with the installation of gazebos, pergolas, patios, such a move as making a swing with your own hands will work great. This is the easiest way to diversify your vacation and bring lightness and fun to the environment. What they will be - free-standing structures or part of a relaxation complex - you decide for yourself.

wooden swing in a secluded corner of the garden overlooking the pool

You should not consider this element as purely child's play. Believe me, such entertainment in a modern interpretation will appeal to all household members and will definitely not be idle, so let's figure out how to make a swing in the country a worthy decoration of landscape design.

Structures can be classified according to many parameters. The assortment list includes children's swings for the street and models for adults. The improvisation of the division should be started with the rocking method, and it can be:

• vertical;
• horizontal.

swing sofa for the whole family

In the first case, the swing is in the form of a long crossbar with a reference point located in the middle. The principle of their action is a counterbalance. It is necessary to swing on a horizontal swing in two, and it is desirable that the weight of those sitting opposite is approximately the same. Basically, this is a solution for playgrounds, but if you wish, you can increase the dimensions and strength of the structures so that older households can have fun on them, you just have to make adult swings with your own hands. It is unlikely that they will be found ready-made.

a simple hanging swing for two

With a vertical suspension of the seat, it will be possible to swing on a swing on an individual basis. The horizontal range of motion during swinging is typical for most swing models. This is how the bungee works, and a solid structure with architectural forms and soft seats.

Structural diversity

original metal swing spherical shape

Hanging swings for summer cottages are always popular and the reason for this is the simplicity of the design. In fact, this is a seat suspended from any crossbar. The role of the bearing support is often performed by tree branches. For greater safety, it is better to use not a standard weaving rope, but more powerful cables as suspensions. A budget option that allows you to build a swing in the country with your own hands, even for those who do not have experience in such matters.

swing with soft mattress and pouffes

Frame structures are more difficult for independent execution, however, they are also more reliable in use. The crossbar carrying the seat, in this case, is laid on strong and securely fixed supports. The seat also rests not on cables, but on metal rods or chains.

metal swing chair on the veranda of the cottage

In a separate category, children's swings for the spring-type street should be singled out. These are always bright structures with comfortable soft seats that imitate the appearance of cars, trains, airplanes or animals. The rocking mechanism in them is a powerful spring, securely embedded in the support. The swing is equipped with handles and straps, which ensure the safety of operation. Since such models are designed for the smallest summer residents, their use should take place exclusively in the presence of adults.

wooden swing with a comfortable soft seat for one person

Whether to make a spring summer swing with your own hands or purchase ready-made structures via the Internet is a rhetorical question, and the answer to it depends solely on your ability to solve engineering and technical problems.

Garden swing for the whole family

"Swings in the country can be installed permanently or use their mobile versions"

If there are no very young children in the house, or a separate playground is provided for them, it makes sense to think about using it in the country landscape:

• sofa swing;
• swing-chaise lounge;
• hammock swing.

spacious backless swing for several people

Swing sofas

In most cases, these are mobile structures, characterized by increased comfort and ease of installation. The shape of the seat is similar to the design of the sofa, that is, it has a back, soft pillows. In some models, the seat is transformed into a full bed. Such a swing for a summer residence is designed for long-term operation. In the store version, they are most often found in a metal version. If you want to have something more original in the landscape of your site, you can assemble a similar country swing with your own hands from wood.

swing sofa goes well with furniture on the veranda

Swing chairs

Two people can easily sit on the seat of such a swing. These are durable products constructed from a special alloy, most often of a mobile type, which allows them to be transferred to any summer cottage and even to a veranda or house.

portable swing chaise longue will become a favorite place of leisure in the country

Swing-hammocks

It can be both a hanging swing for a summer residence, and frame structures. In the first case, the canvas of the hammock is shaped like a seat and hung on a cable or chain on strong branches. For greater comfort, such a seat can be laid out with pillows.

the convenience of this model lies in the fact that it can be installed on the crossbar of the veranda or on a branch of a shady tree

In frame models, the hammock is fixed to the supports and can be hidden under an awning or plastic roof. In expensive types of swing-hammocks, a mattress is provided.

Swings in the country can be installed permanently or use their mobile versions. In the first case, you need to successfully choose a place for their location, since it will not be possible to rearrange the accessory with a slight movement of the hand.

wooden swing for two in the form of a rocking chair with a stand for glasses

What can you make a swing with your own hands

When arranging places for leisure activities, take care of the appearance of comfortable and practical swings in them. Do not rush to go to the store for them. Try to make a country swing with your own hands. Of what? From whatever comes to hand. And what is always found in the summer cottage?

Rope

This is the main structural element of the famous "bungee", capable of causing screams of delight not only among children, but also among very respectable adult uncles, risking a ride on it. Most often, it is placed above water bodies and at the same time endowed with the function of a kind of springboard for jumping into the water.

swing from a rope and a log

It is not difficult to build a rope option. All that is required is to find a stronger branch and tie one end of the rope to it. On the other hand, a thick knot is tied or a polished log of small thickness is tied, which will be pleasant and convenient to grab with your hands.

Wood

This is a material from which you can make less frivolous swings in the country with your own hands. Wooden structures should have a comfortable seat. The advantages of this option include the environmental friendliness of the product. The wooden model will simply fit into any garden landscape, regardless of its stylistic decision.

even a beginner in carpentry can make such a children's swing

Wood is not a very difficult material to work with, so even beginners in carpentry can use it to create a swing. How to make a swing to the country house of wood, we will tell you a little lower, but for now let's digress to its shortcomings.

Despite the fact that the material is considered durable, it is not durable and reacts poorly to moisture, cold, and sunlight. You can extend the life of a wooden swing only by treating it with protective compounds, which, fortunately, are in abundance today.

Metal

Only a select few can make a swing with their own hands from metal, that is, those who have experience with welding or know blacksmithing. Of course, metal models are the most durable and rational for outdoor use. They can be made:

1. Collapsible.
2. Mobile.
3. Stationary.

glass swing should be installed in a shady place

According to the method of production, they are also divided into:

• welded;
• forged.

The hand-forged swing sets off a luxurious and rich exterior. Openwork elements give the country swing uniqueness and make it a stylish addition to landscape design. If you need an eternal swing in the country - make it out of metal.

Naturally, the metal surface of the frame will also have to be protected with a special coating (provided that you have not welded a stainless steel swing), which can be attributed to the disadvantages of the material. But by and large, the lack of metal structures is only one and that relative. It's about their bulk. Heavy weight complicates the task of moving mobile and collapsible options.

Plastic

basket swing

If you don’t know how to make a children’s swing for the street, pay attention to durable polymers. Perhaps the seat will have to be bought, or perhaps something suitable for this role will be found in the bins of the barn.

The easiest way to build a hanging children's swing. For this option, it will be enough to pass through the holes or thread the rope into the grooves and adapt the entire structure to a tree or other type of support. For kids, it is still more rational to purchase ready-made swings made of plastic. In principle, they are not so expensive, but they look very attractive. They are bright, do not react to moisture, do not need specific care.

When choosing a design, pay attention to the quality of the plastic. It should not emit toxins when heated.

original plastic triangular swing

Plastic swings in the country may not always be in harmony with the surrounding landscape. The modernity of the material can negate all the efforts of the designer to give the landscape a vintage or rustic look. It cannot be called positive that the plastic swing is not an attraction for the whole family. Neither teenagers nor adults can ride them.

And further. In a do-it-yourself swing for a summer residence, a symbiosis of materials may well slip through. It won't sound like nonsense. Wood can be a wonderful addition to metal, and a rope to wood.

Where to put a swing in the country

Before you start working on a swing with your own hands, remember that the design should become an integral part of the overall stylistic decision for the design of the site, and think about where you are going to put it. This will help determine the design of the product and will affect the choice of material.

a portable metal swing in the Art Nouveau style fits perfectly into the landscape design

Playgrounds and adult recreation areas remain the standard installation site for swings. If you are going to make a do-it-yourself wooden swing for a summer residence, it would be nice to place them on the terrace. The roof of the building will become a reliable protection against adverse natural influences and will contribute to the long-term operation of the relaxation accessory. With the size, you won’t be able to accelerate much, but for the standard option for two, there will always be a place in the gazebo.

the roof of the veranda will protect the swing from adverse weather conditions

Alternatively, the swing can be taken out under a pergola or arranged in an arch. The latter will be an excellent support for hanging swings for summer cottages. The green cover will shade the seat from the sun, so you only need to hide it from the rain.

Swing as a stylish addition to a stylish landscape

“When constructing a swing with your own hands, stop at a laconic, but not devoid of roundness of lines frame and neutral colors”

A swing is one of the few pieces of country furniture that helps fill it with comfort. Ever wondered how pleasant they can be to spend an evening or an afternoon siesta? Just imagine: a gentle breeze, bird trills, the aroma of flowers - all these charms will bring much more pleasure if you taste them slowly flying towards you. It remains only to find a swing for the dacha of a design that meets your needs and with a design suitable for the garden setting.

The bestsellers today are models with a fabric canopy and soft seat cushions. They are relevant for any landscapes decorated in rustic styles, especially in French country. Craftsmen can assemble such a summer swing with their own hands. They will look much more interesting than store-bought ones, as you will get a chance to play with shapes and decorate them with prettier fabrics.

swing in the middle of a picturesque summer cottage

A spectacular element of garden decor in a rustic spirit will be obtained from a swing made with one's own hands from rough wood.

In the airy and sophisticated gardens, you should look for a wrought-iron swing, with wooden seats and a polycarbonate roof.

A stylish model of a swing-cocoon decorates cottages with classical and progressive landscapes.

a swing bench in the background allows you to admire the interior of the landscape

A swing to the country with a modern landscape solution can be in the form of a deck chair and be made in gray and white colors. No less relevant are steel swing chairs, the seat of which seems to be woven from air bubbles. The design is openwork, so it does not look rough, although it has some kind of alien look. You can buy such a swing in metallic or lavender color.

wicker rattan swing design

Suspended swings for high-tech cottages should be distinguished by original design and modern materials of manufacture. Their task is not only to increase the comfort of rest, but also to become the accent center of the relaxation zone.

a cozy sitting area equipped with a swing-bench

Do-it-yourself wooden swings are not too difficult to assemble for an Art Nouveau garden. These should be imposing looking structures in original design, covered with soft mattresses, comfortable seating.

In landscapes with an eastern slope, you can hang a swing-drop or put a “Moon” rocking chair. The last option is more solid. Such a swing in the country will give you the opportunity to even take a nap.

an alpine slide with an artificial pond is complemented by a loft-style swing

Sun lovers should be interested in rattan swings-chaise lounges. You can sunbathe in them with great comfort. Those who seek solitude have no choice but to make a swing in the country with a closed chair-seat. Such hanging nests will serve as a compromise and allow you to stay in the fresh air, hiding from prying eyes and annoying sounds. Inside this makeshift house is incredibly cozy, therefore, if you have the opportunity to make several similar options, do not give up on the idea, otherwise you will find yourself in a constant battle for a comfortable stay not only with the rest of the household, but also with cats. The swing model is universal and can decorate a garden of any stylistic direction.

traditional children's swing on A-pillars

For stylistic solutions with reverence for textile decor, you should choose a swing tent. In their design, in addition to the canopy, there will be adjustable translucent curtains, with which you can create the most comfortable environment for yourself.

There is no better solution for the Gothic, how to make a do-it-yourself swing from forged elements and complement the design with lanterns that correspond to the stylistic requirements of the form. With their appearance, the garden will immediately acquire a mysterious look.

a full-fledged swing bed becomes the center of attention in landscape design

What has no boundaries is the romantic directions. The swing in the country with this design has a leading decorative role. They should have such an appearance that no one has any doubts about the comfort and coziness of the surrounding space. This means that the swing should not suffer from brevity of forms. Their frames should please the eye with the grace of curves. If you are working on DIY swing decor, make sure it has a colorful look. Paint the seat and uprights in bright, eye-catching colors. In priority:

• green;
• orange;
• red;
• yellow.

Pay attention to the shape of the seat. It should be very comfortable and really allow you to relax.

great swing for relaxing by the pool

Since swings in such landscapes are placed in prominent places, for example, near water bodies, in front of flower beds, they must be completed with canopies. But the romantically designed structure will make the greatest sensation framed by an arch entwined with greenery. However, you can find your swing in the country and another, no less original place, nothing limits you in choosing it. Fantasize for your health!

swing with an awning in the middle of a flower oasis

How to make a swing with your own hands in minimalist landscapes, what shape to give them and what material to use is not so important. In this case, attention should not be attracted by the structure itself, but by its location, or rather, the view that opens from it.

A swing in minimalism should allow you to detach from what is happening. Those sitting on them will involuntarily focus on the contemplation of the proposed landscape, and tune in to a philosophical mood.

swing set in a secluded corner of the garden

When designing a swing with your own hands, stop at a laconic, but not devoid of roundness of lines frame and neutral colors.

A few ideas on how to make a swing with your own hands

We use pallets

After construction, pallets often remain in suburban areas, which served as a pallet for transporting bricks or bulk materials. It is not at all difficult to turn them into a comfortable swing with your own hands. Of the consumables, in addition to the pallet, you need to stock up on a strong rope and find a support to which the finished structure will subsequently be attached.

homemade swing from pallets with a back for two

The easiest way to build a children's hanging swing for the street. First, process the pallet. Its surface must be made smooth, without splinters. Now impregnate it with a protective compound and open it with stain or varnish. Pass the rope under the top tier. This must be done symmetrically on both sides. Tie the loose ends into a common knot. Find a place to hang. If it is intended that only a child will use the swing, do not raise it much above the ground. For convenience, you can put a mattress with pillows on top of the makeshift seat.

wide pallet swing without back for the whole family

How to make a swing with your own hands from the same material, but for general use? The principle can be left the same, only to increase the seating area by connecting two or more pallets together. Those who are familiar with carpentry can assemble swing sofas from pallets.

Transforming a bicycle wheel

From the old rim of a bicycle wheel, you can build a magnificent, nest-like, hanging swing for a summer residence. In appearance, the design will rather resemble a hammock, in which you can ride not only sitting, but also lying down. What do you need to assemble a swing with your own hands?

1. Large bicycle rim.
2. 4 metal rings.
3. 2 fastening carabiners.
4. Multi-colored and white ropes.
5. Polypropylene pipe.

swing from a metal rim sheathed in thick fabric

How to put it all together? The polypropylene pipe is bent and hidden inside the rim. Through the existing holes for the knitting needles, the structure is tied. Then the resulting frame is braided with ropes and the seat is woven out. Knitting is carried out according to the scheme for creating a "dream catcher". The final stage is the design of the rim with colored ropes with parallel fixation of rings for suspensions.

In order for the swing in the country to live for more than one season, do not be too lazy to additionally isolate the metal rim with tubular material used in the thermal insulation of pipelines. So the metal will not rust, and the ropes will not fray so quickly. Hang the resulting swing in the shade of trees or find a place for them on the playground. Entertainment is ready!

Log swing

classic swing hanging from a tree branch

Also an original idea. Do you want to know how to make a magnificent country swing with your own hands from two unsightly logs? Here, too, you do not need to be seven spans in the forehead. The model is extremely simple and is combined from two pieces of a rounded bar and a rope. All that is needed to get a real hanging outdoor swing is to tie both logs into one plane and fix them in that position with some type of marine knot. The remaining length of the rope should be enough to hang the structure.

The second life of an old skateboard

A broken snowboard or an old skateboard should not be rushed to a landfill. Of these, you can make quite functional and cute children's swings for giving. These boards are extremely durable, so they will adapt wonderfully to their new role and last for many years. Naturally, both contenders are just seats that still need to be beaten. Do you want to know how to make a DIY swing from these remains? Extremely simple.

children's swing from an old skateboard

All that is required of you is to find a high-strength rope and cut grooves in the board to fit its diameter. There should be 4 such cuts on each side. This is necessary for reliable braiding them with a rope suspension.

It is even easier to make a skateboard construction, where the roller mechanism has been preserved. Here, the wheels are simply entangled with rope loops. You can't imagine a more reliable fixation.

And tires again

Tires have become an indispensable material in dacha design. They did not remain unclaimed in the design of swings with their own hands. There are several ways to make exciting attractions out of them.

It is easiest to work with a solid tire. Holes are drilled in its surface and rope fasteners are passed through them. From the inside, the plants are fixed with strong knots. You can take iron hooks with threads for the role of fasteners and knit a rope to them.

budget option - a swing from a car tire

Now let's see how to make a country swing with your own hands from cut tires. For work, take the tread part of the tires. We bend the first strip in half and lay perpendicular to the second. We fix the stripes at the intersection. We pass the fasteners through the bottom tire and hang the finished product on a branch or horizontal bar. Chains can be used instead of ropes.

We complicate the task

If you have carpentry skills, then you can safely take on the creation of a swing to the dacha of a more complex supporting structure. We will work with rounded timber. We will give the bearing part the shape of the letter "A". We will need 4 long logs and two short ones. To assemble the first support, we will make an angular cut of the upper ends of the long beams in a mirror image. This will allow you to install and secure them in the required form. Now we will strengthen our support by installing a crossbar. By the same principle, we will collect the second part.

a swing made of round artificially aged logs perfectly complements the table and chairs in its execution

The next step will be fixing the transverse support beam, to which the seat will be attached.

It is also proposed to make the latter from pure wood. An L-shaped frame made of thick timber is sheathed with polished and polished durable slats or narrow boards. It looks like a garden bench. For greater comfort, you can provide cobbled armrests.

Making a stationary country swing with your own hands alone will be somewhat difficult. As an assistant, it would be nice to attract someone from the household. Most of all, assistants will be required at the installation stage. But this is still far away, so let's get back to working on the design.

homemade wooden swing on an A-post with a small awning

Let's deal with the suspension of the seat to the beam. As a fastener, you can choose any adequate option that can withstand the weight of the seat itself and the people on it. Rope obviously won't do it. The chains will not look very aesthetically pleasing either, although if you work on the overall design, you can harmoniously fit them into the design. In our case, it is better to take the same rounded timber for the mounting suspension. From other parts, you will need rings or hooks and powerful carabiners.

To install a swing in the country, you will need to dig holes for the legs and immerse the supports in them by at least 80 cm. Since we have a wooden structure, it is recommended to wrap the underground part of the legs with roofing felt or grease it well with mastic to extend its service life.

the larger the plot, the more options for choosing a swing

Spend the outdoor decor at your discretion. You can add pillows to the seat, you can put a canopy over the swing, you can decorate the structure with carved elements or other accessories.

Swing in the country: features of care

"It doesn't matter how the swing is made - with your own hands or in production - the principles of maintaining their longevity and serviceability remain identical"

Is it difficult to take care of a country swing? There is nothing supernatural in this process. It doesn’t matter how the swing is made - with your own hands or in production - the principles for maintaining their longevity and serviceability remain identical.

wooden swings need care - periodic varnishing

If the structures available in the country landscape are of a wooden nature, then try to prevent them from getting wet. A tree, even in its living form, does not respond very well to an excess of moisture, and being in the form of logs even more so. What follows from this? The only thing is that wooden children's swings for the street, however, as well as garden swings, where the whole family rests, will have to be treated with protective compounds, possibly periodically varnished or painted. If the swing has a collapsible design and is removed from the site for the winter, do not store the wooden components packed in polyethylene.

metal swings do not need complex maintenance

Those who prefer rattan should remember that such products cannot be taken out into the open sun and left in the rain. Care consists in periodically wiping with a damp cloth from accumulated dust.

What will not be much trouble is with a plastic swing in the country. Nothing beats quality material. It will not lose its brilliance or form. You can clean the plastic swing in any way - both dry and wet.

non-standard design of plastic swings on the veranda of a wooden house

Their metal products are more whimsical and afraid of corrosion. Therefore, it will be necessary to monitor the integrity of the decorative layer and, if necessary, restore it in time. With regard to washing the swing - there are no restrictions.

Reading time ≈ 10 minutes

It's nice to sit on a bench after a long day at work. It is also much more pleasant to relax on a garden swing, which will give light swaying and soothing coolness. Buy, unfortunately, such a design is not always possible. After all, the cost of such a swing is high, often sky-high. Therefore, let's talk about how to build gardens in order to enjoy a pleasant outdoor recreation.

Beautiful garden swing in the country

Undeniable advantages of a garden swing. Varieties

At the dacha or in the yard of a country house, garden swings are an indispensable attribute of landscape design. In addition to a great place to relax, they perform many functions:

1. resting on them, you can easily gather your strength;
2. calm the nervous system;
3. beautiful decoration helps to transform the entire yard;
4. a comfortable place to work at a laptop or to read books;
5. you can nap on them during the day (especially for children);
6. suitable for a pleasant tea party and conversations with a glass of wine;
7. children are helped to train and develop the vestibular apparatus.

As you can see, the benefits are really huge. Therefore, it is logical that their popularity is so high among the population. The design, in fact, is not very complicated, so even a beginner in the construction business will be able to build such a swing at home.

Another advantage of own construction is the full compliance with your desires. You can decorate or decorate it yourself, choose a special shape and size. The main thing is to follow the instructions during construction, then everything will definitely work out.

Before you start making a garden swing, you need to consider what they are. For example, for the purpose:

• for kids;
• for adults;
• for the whole family.

Depending on the location there are:

• stationary swing;
• mobile swing. Convenient in that you do not need to be tied to a specific place. You can easily and quickly move it to another site.

If we talk about the main materials used, then the swing is:

• from wood;
• from metal.

The design can also be very different.

Suspended.

This option is simple. All that is needed to create such a swing is a crossbar, a high strength rope and a seat (it is better to choose with a back).

Hanging garden swing

Frame.

Often used for children. They are strong and stable and easily moved. So at any time you can move the swing to the shade or another place you like.

Frame garden swing

Crafting on wood requires crafting a seat. Everything else is easy. After all, it is not necessary to make a frame in this case. After the construction of the structure, it must be fixed to a tree (make sure that the branch used is strong) or a beam. For fixing, a cross-twist rope with a diameter of at least 24 mm is suitable (especially for swings on which children will ride).

You can replace the rope with a chain suspension. So you make the whole structure much stronger. So that the chain links do not harm children (fingers can get into the links), you need to place it in a suitable size plastic pipe. Alternatively, you can take a chain canopy with a small caliber. It is worth noting that in order to install a frame garden swing, you should choose the right place on the site, avoiding trees and various kinds of fences.

Correct choice of support

A swing support is not just a structural element, but its main component. The safety of being on a swing and the permissible amount of swing will depend on its strength. Most often, the material that is used to make the support is wooden beams, metal pipes and corners. For a summer residence, a support in the shape of the letter A is often enough. For this, a frame is built from two supporting elements. Between themselves, they are connected by a transverse beam, which is installed horizontally. Its placement occurs at the level of one third of the column above ground level.

The crossbar itself, on which the seat is then hung, must be mounted to the uprights, which are vertical. Use screws for fastening.

Important: metal swings must be fixed in the soil. Because in the process of rocking the "leg" of the pipes loosens and twists out of the ground. To prevent this, support frames are created. Alternatively, concreting into a trench can be done.

But for a more durable fixing of the wooden structure, you need to bury the "legs" of the garden swing to a considerable depth (at least one meter). It can also be filled with concrete. But before concreting, it is necessary to carry out preparatory work. Bituminous mastic is applied to the support so that the “legs” are well saturated. This will protect the wood from decay processes. A brick is laid at the bottom of the pit.

Video: do-it-yourself garden swing made of metal

Do-it-yourself construction of a garden swing made of metal

Metal is a durable material and heavy enough to make the entire structure of the garden swing strong and stable. This choice is ideal for building a swing that teenagers and adults will ride on. Also, the metal base will be more wear-resistant to heavy loads.

Metal garden swing

Be sure to use the drawing so that the entire installation is done correctly. Therefore, further step-by-step instructions are presented so that you can build a garden swing with your own hands from metal (drawings and dimensions, photos will be indicated below) in your country house. Of course, the options are selected individually. And in the photo we show only one of the possible.

Drawing of a metal garden swing

The construction of this installation begins with the preparation of materials:

1. pipes cut in accordance with the required dimensions;
2. burrs and sharp protrusions should be removed with sandpaper.

1. Form a base. To do this, the supporting elements must be fastened at an angle of 45 degrees. Then install the crossbar. It should be strictly perpendicular to the uprights themselves. At this stage, you should use a welding machine to connect all the elements as firmly as possible.
2. It is necessary to make recesses to secure the support. Pour sand to the bottom, which must be well compacted. Then install the support and pour concrete over it. The entire structure is left for at least a week so that the solution dries well and sets.
3. As soon as the filling dries, you can proceed to fixing the seat. Before installing it, you need to weld special hooks using a welding machine. The seat itself is hung on ropes (high strength) or on metal beams.
4. The final step is to paint all the elements of the garden swing. This measure is necessary not only to give the structure an attractive appearance. By painting it, you will protect your creations from rust and corrosion. It is also possible to decorate according to your taste and imagination.

Finished metal garden swing

If you feel that this option is beyond your power, then you can stop at a simpler copy of it. In this case, you need to stock up on a regular metal profile (diameter 50 mm).

Drawing a simple model of a metal swing

On the drain (transversely), attach special metal brackets. To do this, use bearings and a welding machine.
Install the seat on suspensions and attach to the structure itself. Most often, metal rods or chains can be found as suspensions.

A simple version of a metal swing

The creation of exclusive models looks original and attracts the attention of others. It can be forged products or a swing made from channels, or rather from their scraps. The swing benches made by yourself look interesting.

Wrought iron garden swing

Wooden swing

They are especially popular. After all, wood has always been popular as a building material. Building a garden swing with your own hands from wood is as easy as from metal. Drawings and dimensions, photos from the Internet to help you. It is only necessary to use suitable projects, then you will get the perfect result, and the photo of the homework is proof of this.

DIY wooden garden swing

Such structures have their advantages:

1. naturalness and environmental friendliness;
2. presentable and original appearance;
3. strength (in case of impregnation with specialized solutions and substances).

Drawing of a garden swing made of wood

The most suitable tree species are birch, spruce or pine. For construction you will need:

• wooden pole - 2 pcs.;
• cross bar;
• rope - about six meters;
• hooks or suitable hangers;
• elements for fastening the structure (the ideal option is to use bolts).

If you have a wooden beam, then building a swing on four poles would be a great option. But this design requires some attention and effort.

1. Initially, you need to make a support. Two parts of the bars need to be assembled in the shape of the letter A, as shown in the photo.
2. After that, you need to fix the crossbar.
3. In order for the installation to be as strong and reliable as possible, you need to use short bars.
4. From the same bars you need or a seat. And don't forget the backrest for maximum comfort.

Beautiful garden swing

Construction of a children's garden swing

The process of building a swing for children is similar to the construction of an adult version. We need a detailed design diagram, drawing the dimensions and locations of the elements for fastening. When using blueprints for adults, be sure to optimize it for children.

1. Racks need to be made. They must be the same size.
2. The racks are installed at a distance that directly depends on the width of the future seat.
3. Connect both supports with a crossbar.
4. Particular attention should be paid to the reliability of connections. To do this, you need to measure as accurately as possible the angle at which the elements of the racks, which are located vertically, will be connected.
5. You also need to ensure that the crossbar itself is equally removed from ground level.
6. Before installation, you need to dig a trench. It creates a special pillow of gravel. That's where the supports are placed. After installation, everything is poured with concrete mortar.
7. There is a grinding of the entire structure, it is also necessary to round the corners. This is necessary in order to make the swing safe for children.

Children's swing

Your dacha will sparkle with new colors when such a swing made on its own appears in the yard. It is not only useful, but also incredibly beautiful.

Fixing system

There are various mounting systems for garden swings, namely:

• carabiner - made from the following types: with a rectangular section (intended for beams) and with a circular section (for bars);
• anchor - the type of fastening passes through;
• staples and hooks - designed for children's models;
• clamps - needed for fixing in case of hanging the swing on cables.

Therefore, carefully study the features of each system. After all, the right choice of fasteners allows you to make the swing not only durable, but also reliable.

Rope swing

The most classic models are rope and log swings. This option is considered the easiest to manufacture. To implement such an idea, it will be enough for you to make four holes. Use a wide log as a base. A rope must be passed through the holes made.

Rope garden swing

Using the same ropes, you need to put on a board for the seat. But you need to be careful. This option is not entirely sustainable. To prevent the seat from flipping over, make four holes on the side and thread the ropes through them.

The ends of the rope must be tightened well and tied with strong knots. And the swing is ready to use.

Today, DIY garden swings make a chic and unforgettable impression. It just takes a little patience and attention. What will the swing be like? Frame made of metal or mobile made of wood? It's up to you, but the swing must be fun. And all the most interesting about the independent construction of a garden swing, see the video below.

Video: wooden swing