Decoupage stool. Decor stools in various techniques. Necessary tools and materials

The new direction of do-it-yourself decoupage of chairs originates in the Middle Ages. Back in the fifteenth century, housewives actively used it at home, making interior items more beautiful. Making decoupage on your own is very simple, the main thing is to be imbued with this art direction, and then it will be easy to give a second life to old furniture.

If you decide to try this type of apartment decoration for the first time, then decoupage of an old chair and table with wallpaper will be the most suitable option. Decorations can be made up of the remains of various wallpapers that lie in almost every apartment. If there were none, then you can buy absolutely any, there is no difference how you will make decoupage.

Decoupage table wallpaper

Before you start decorating a stool with your own hands, it must be thoroughly cleaned. It is necessary to eliminate all cracks and splinters, and this is best done with sandpaper or a grinder. The final design depends on the clean surface of the furniture, as even a small greasy speck will spoil the appearance and shorten the life of the finished product.

The easiest way to start decorating chairs is with a patchwork technique. It is the simplest and most understandable, because it uses whole pieces of wallpaper. A sheet is glued to a clean surface and left to dry completely. As a result, you can varnish the surface so that the brightness of the pattern does not pass over time, especially for a wooden chair.

Decoupage of home furniture with napkins

Decoupage with napkins

For beginners, napkin decoration will also be a good option. Decoupage of a chair with your own hands in this way is not much different from wallpaper, but requires a more careful approach. Napkins can be stocked up in a simple store, as well as in special departments for needlework. This design is suitable for almost any interior of the apartment, because the variety of napkins is as large as the wallpaper.

Don't forget to prepare the surface. The painting will last for a long time and with high quality only with a clean surface of the furniture. DIY chairs can be presented in different styles, it all depends on your imagination. Decoupage motifs can be taken on the Internet, there are various designs for almost every type of room.

Decoupage fabric on furniture

If the apartment has unnecessary and beautiful weaving, then with it you can decorate old chairs, tables, cabinets, stairs and much more. Pieces of fabric are more durable than paper. This design will last longer, and care for it will be as simple as possible. The advantage is that you can not only glue home furniture with a cloth, but also simply fit it.

The Crafts Fair offers thousands of finishes for home furniture. It is there that you can watch a step-by-step master class that will teach you how to properly control the work process, and also present some of the subtleties of this lesson. The design of the manufactured furniture depends on the apartment in which it will stand. So first you need to decide on the pattern, so that in the end everything is in perfect harmony with you.

Materials for decoupage with a cloth We cut the fabric, grease it with glue, let it dry for 40 minutes We cover the bedside table with 2 layers of PVA glue, using such a roller
Sprinkling with glue, we glue the fabric to the bedside table using the patchwork technique. We decorate the drawer of the bedside table. Additionally, we decorate with a rope

Result

What do you need for decoupage?

How to make your furniture beautiful and original? This question is asked by many housewives. Even a highchair can be decorated with decoupage, because the materials used for work are absolutely harmless. A decoupage chair will cost ten times cheaper than buying a new model. For standard decoration, you will need:

• PVA glue;
• napkins, fabric, wallpaper;
• sandpaper or grinder;
• stool, table, chest of drawers, wardrobe or any other furniture;
• washcloth;
• acrylic lacquer;
• tassel.

It will not be difficult to purchase such a painting kit, and the final work will look simply amazing. Decoupage of chairs with your own hands, a photo of which is presented in large numbers on the Internet, will be an excellent option for updating the surroundings of the apartment. Many decorate on wood because this surface perfectly accepts glue with any materials.

Now it has become fashionable to use shabby chic in the interior, a new direction of the original interior. In the shabby style, you can decorate chairs with a back, stools, tables and chests of drawers. In this way, you can even decorate a wall in a room that does not stand out in any way. This style brings warm bed tones, small patterns of antiquity and the unique charm of irreplaceable wear. This do-it-yourself decoupage of kitchen furniture will surprise any gourmet.

Decoupage of a coffee table with your own hands, photos of which are available in large quantities, can be a great option for a bedroom, kitchen or living room. Decoupage in the Provence style can be harmoniously located in any living room, because this style in modern furniture is conducive to relaxation and comfort.

You can do decoupage on a stool with your own hands in absolutely any style. In addition, any home furniture is suitable for such restoration in the best way.

Chair decoupage

We cut out the blanks It is better to make a copy of the drawing and print it on a laser printer Let the finished product dry thoroughly, and then cover it with several layers of varnish
Using a sponge, apply PVA glue to the entire surface of the chair. To avoid possible bubbles, before putting the paper part on the glue, dip it in cold water. Result

Step-by-step instructions will tell you how to decorate a chair, kitchen, bedroom and other rooms with original interior items. A room decorated in this way will delight its owners with its individuality, and most importantly, they will have a small piece of the love with which each element was decorated. It doesn’t matter what you decide to do, decoupage of a stool or decoupage of a children’s chair, the main thing is to take this issue seriously so that the result serves for a long time and pleases the eyes every day.

Furniture that no longer has a decent look, but it’s a pity to throw it away, because it still performs its main functions, is present in almost every home and most often these are stools. You can correct the situation and give stools a second life with the help of decoupage. Of course, all work will require financial costs and effort, but in the end, a thing created by oneself will appear in the house, which will delight with its exclusivity. What is decoupage and how can you update furniture with it?

Decoupage what is it

Processed stool

All decoupage work is based on cutting out small parts from various fabrics, cardboard and paper, which are subsequently glued to the base. Next, the resulting composition is painted and varnished in several layers. This procedure allows you to fix the glued part to the surface to the maximum and hide the joints as much as possible. The updated thing can be decorated with gilding or other effects, at the discretion of the owner. The whole decoupage procedure allows you to update or simply decorate an arbitrary object, whether it is the restoration of a stool or.

On the video - a description of the procedure in detail:

All the necessary materials for work can be purchased in specialized stores or you can order from special sites where goods are provided to fulfill any fantasy. Sketches for blending are taken from magazines, wrapping paper, fabrics or also from the Internet. It can be done in the same way.

In this way, you can decorate a wide variety of surfaces: glass, porcelain, fabric, wood. This allows you to update furniture, add an intricate pattern to mirrors or dishes.

Stool restoration

I would like to note the rhinestone - decoupage of the old process is not difficult, but it requires patience. After each process of applying paints, varnishes or primers, it is imperative to wait for the allotted time for them to dry, otherwise the look of the stool will not become better than it was.

Required for work

Before you start, you need to make sure that the following materials are at hand and at any stage of work, you do not have to drop everything and run to the shops:

• primer (for wood to level the surface);
• sandpaper (preferably coarse forty);
• paraffin candle;
• acrylic paints (white and brown are required, and for additional finishing you can take any desired color), you can use it if there is a shortage;
• fan brushes (flat) for creating decoupage;
• special stickers or napkins;
• PVA glue;
• sponge (can be used for washing dishes);
• acrylic lacquer;
• to finish the stool along the edge, you can buy guipure;
• guipure is glued with a glue gun. And you can find out about cheap kitchen corners by.

On the video - how the restoration takes place:

Do not rush to quickly purchase stickers. Go shopping and take a look. In stationery departments, such stickers can be found 3-4 times cheaper than in specialized stores.

Training

Each layer must be dried, on average 3 hours. Do not forget about the primer ends. In the future, this will help to avoid moisture ingress, and the work will not deteriorate.

For a better result, some craftsmen add a little acrylic paint (white) and PVA glue to the primer, and after each layer, lightly sand the details. And you can find out about the kitchen glass sliding table.

In cases with perfectly flat surfaces, the cleaning and priming process is skipped.

Process

1. At the first stage, the entire surface is covered with white acrylic. Along the edge, and in small areas in the center, brown acrylic is applied.
2. After the paint has dried (about 3 hours), the places with a dark color are rubbed with a candle.
3. The entire surface is again treated in two layers with white acrylic and left to dry (for a day).
4. A day later, the surface is lightly rubbed with sandpaper so that dark acrylic begins to show through the white layer. You can not overdo it and remove all the applied layers. It is required to create the effect of a slightly worn thing.
5. The base is ready and you can proceed to the design itself. A conceived compositional drawing is assembled from napkins. Fragments taken from napkins should be cut off at the edges rather than cut out. This method will make the edge borders less noticeable.
6. The whole composition is folded, and you can start gluing it. Here we need a brush and PVA glue. It is better to dilute the glue slightly so that it is not too thick and does not reach for the brush. Each fragment is carefully processed with glue and applied to the surface, while all the irregularities are smoothed out, and the wrapped edges are straightened. Also, you will need to carefully remove the air if it suddenly gets under the fragment.
7. The whole composition is assembled and ready. To complete it, along the edges of the stool, you can create a color accent using a sponge and a pre-selected color. The lip is dipped in acrylic and the entire edge is soaked with light movements.
8. All the stages of work passed are repeated for the legs.
9. After everything has dried well, all surfaces are covered with acrylic varnish. It is advisable to repeat the procedure in 2 - 3 layers while waiting for the preliminary drying.
10. The stool is assembled, and its edge is decorated with guipure, which is more convenient to fix with a glue gun.

You can find out how to make a wooden table yourself.

On the video - the restoration rule:

Other ways to update furniture

In addition to the decoupage technique, the stool can be restored in other equally interesting ways.

The purpose of decoupage is that with the help of paper pictures, the object acquires a new and vibrant life. The technique itself is a selection of appropriate patterns and sticking them on things with special fixing solutions.

You can decorate in the decoupage style dishes, boxes, decor items and much more. Recently, it has also become popular to decorate any furniture in this way: tables, chests of drawers, wardrobes, chairs, and so on. This decor technique allows you to refrain from buying new furniture and bring individuality to the design of your home. And decoupage of chairs also helps to diversify the interior.

Necessary tools and materials

The list of necessary tools and materials in order to decoupage a wooden chair is as follows:

• several brushes of different width and density;
• decoupage glue or PVA;
• pictures (napkins, illustrations from magazines, wallpapers, and so on);
• paint (acrylic or for woodworking);
• pencils or markers (may come in handy if you need to finish some elements of the image);
• varnish (decoupage or plain);
• primer;
• sandpaper;
• putty on wood;
• scissors;
• scotch.

Various decorative elements may be required as additional materials: sequins, rhinestones, shells, buttons, ribbons, and so on.

Stages of the decoupage process

Decoupage of chairs occurs in much the same way as decorating other items. The process itself consists of the following steps:

• thinking over the future decor, the idea of ​​decoupage;
• chair surface preparation;
• background preparation;
• work with a pattern;
• decor (applying paints, additional elements, drawing);
• varnish coating.

The final result of the work depends on the quality of each stage. Therefore, it is better not to rush, do everything carefully and wait for the paints and varnish to dry completely.

Idea for decoupage

Decoupage of chairs (see photo of ideas above) can be performed both in order to completely cover the surface, or partially. That is, you can decorate the whole seat, back and legs with pictures. But this appearance will be too overloaded. It is better to stop at a partial decor and apply the image only to the seat or back. You can distribute small items over the entire surface of the chair.

Think in advance about the theme of the future design, and also look for the corresponding pictures. At this stage, you also need to choose a shade of paint that suits the illustrations. After all, you need to make a background.

When the design option is ready, you can proceed to the actual work.

Preparing a chair for decoupage

If you decorate an unprepared chair, then the decor will lie ugly and will not last long. The same will happen with poorly crafted furniture. Therefore, this stage of work must be given due attention.

To begin with, the chair must be sanded, that is, the old varnish must be removed. For this, a fine one is used. If the varnish is poorly erased, then you will need to use a grinder. It is better to work with her outdoors in a special mask. The varnish is removed from the entire chair. Then the chair is wiped with a dry cloth to get rid of dust.

Now you should apply a primer. Next, it is desirable to cover the surface with a layer of putty. This is necessary to hide scratches, roughness and unevenness of the chair. You can not cover the entire surface, but only areas with flaws. When the putty dries, the chair is covered again with a primer.

Background preparation

The paint must be applied over the primer layer. So she will lie down better and will not fall off. The number of colors depends on your idea. You can cover the back and seat with different paint, highlight the legs and other elements of the chair with a different shade. There are many options. Remember that the main color can be anything.

Paint the entire surface of the chair, leaving the places where the drawing will be glued empty. These areas need to be painted over with a light color (white or beige). This is done in order to make the drawing more visible. After all, the work takes place with a thin layer of paper, and in 99% of cases, dark paint shines through it. From this, the view becomes not the one that was conceived at the beginning of the work.

After the background is dry, you can start working on the illustrations.

Applying pictures

Prepare your pictures: napkins, clippings and pages from magazines, pieces of wallpaper, printouts. As mentioned above, any paper illustrations will do to decoupage the chair.

Master class on drawing pictures:

1. Cut out the necessary decor elements from paper. For example, you decided to decorate a chair with roses, then you need to cut the flowers along the contour and get rid of excess paper.
2. Make a thin layer of the picture. If this is a napkin, then remove the extra layers, if it is plain paper, then glue pieces of adhesive tape to the back several times and remove it. Do everything carefully so as not to damage the illustration itself.
3. Pour decoupage glue into the container. If you use PVA, then dilute it with a little water.
4. Attach a suitable picture to the desired area of ​​\u200b\u200bthe chair and cover it with glue on top.
5. So apply all the pictures.

Let the illustrations dry completely before finishing the decoupage of the chairs.

The final stage of furniture decoupage

In order for the decoupage of old chairs to become a work of art, you need to tinker with the little things. For example, you can add decorative elements such as rhinestones, beads, ribbons, buttons, and so on to the back and legs. But it’s best to work on the drawing itself and the background:

1. Take pencils or markers and draw the outlines.
2. Take paints and thin brushes, finish the background, contours, shadows on the drawing.
3. Use fine sandpaper and scuff the edges of the chair.
4. Add gold and silver to the bulges of the chair.
5. Walk with a wide brush, after dipping it a little in dark-colored paint, if the chair is light, along the edges of the back and seat. This will also create a worn effect.

Try to do your best to make the drawing and the background one. Then the end result will be amazing. If the picture stands out, then a feeling of incompleteness is created and the whole elegant look is lost. Therefore, it is better to slightly process the edges of the illustration with a sponge dipped in the same paint as

To complete the decoupage of chairs, cover it completely with varnish. When everything is dry, the products can be used. Thanks to the varnish, the pattern is not damaged during operation and the chair is easy to wet clean.

Don't be afraid to experiment. Sometimes the best work comes from the unexpected. Over time, as your decoupage skills increase, you can use additional materials to expand the design possibilities (for example, to create decorative cracks).

The term "decoupage" is the French word for "carving". It belongs to the types of applications that are glued to wood, glass, metal and plastic surfaces. You have already seen, but did not know, that colorful frames, pots, kitchen planks, colorful figurines and furniture pasted over with wallpaper and napkins are products made in the spirit of decoupage.

This functional and easy way to design decorative elements will enable even a child to create an unusual craft. Decoupage will allow creative people to create a masterpiece without spending a lot of time and materials. The drawings you like need only be cut out, distributed on the surface to be decorated and fixed with special means.

Individuals who are not afraid to experiment and spend time on creativity may like decoupage of old furniture. This technique requires quality materials and patience. This option will update and ennoble the interior, but it will not take much time.

The materials that are used for do-it-yourself furniture decoupage include bright three-layer napkins, extra pieces of wallpaper. Today, along with the above, fabric is used. Contrasting, colorful patterns, elegant fabric texture will turn old, sloppy furniture into designer creations.

In the end, the decorated surface is varnished so that the thing lasts a long time and looks attractive. In addition to paper, you can use lace, leather and drawings from magazines for decoupage.

Today we will watch a furniture decoupage master class, learn how to decorate interior items.

Often in everyday life the word "vintage" is used. In apartment decor, vintage means bringing old things back to life. Not everyone can afford to buy vintage furniture, because you have to fork out big. But to create an inexpensive, unique analogue is subject to any person. The main thing you need to have with you is a rich imagination and openwork multilayer napkins.

Making cabinets and cabinets in the kitchen with napkins

To freshen up the look of an old kitchen set, purchase paper napkins with a contrasting vintage pattern, cut out the pictures you have looked at and start creating "updated" furniture.

For beginners, first you need to practice on thick cardboard or chipboard covered with plywood. Having "stuffed" your hand, you can start decorating the kitchen cabinet. For this we need:

• High-quality three-layer napkins with a bright pattern;
• Sandpaper;
• Sharp scissors;
• PVA glue;
• Acrylic paint and varnish.

If you are decorating old furniture, then clean and level the surface with sandpaper and degrease with an alcohol-based product.

Then cover the selected surface with acrylic paint, let dry. Then, cut out the ornament you like and separate the two lower layers.

In the place where the picture will be glued, we apply glue and put the picture, carefully straighten its surface, remove air bubbles. Using a natural brush, glue the top layer of the pattern with glue - this will protect it from tearing after subsequent painting.

When the pattern is dry, carefully apply acrylic varnish. Its advantage is that it dries quickly, does not “stink” like chemicals, which allows you to varnish furniture indoors. After 3-4 hours you have a new vintage wardrobe.

Following the given step-by-step instructions, you can decorate the doors of bedside tables, wall cabinets, the visible part of the cabinet-pencil case.

Decoupage wallpaper

Wallpaper decorates only the furniture that does not fit the new interior or is considered outdated. Wallpaper, with a fashionable print that blends harmoniously with the decor, will refresh the furniture and give it a second chance to “life”. Wallpapering methods are varied. You can wallpaper over both individual parts (doors, drawers), and the entire visible surface as a whole.

For beginners, furniture decoupage is better to start with simpler models. For example, you can decorate a table top using a single piece of canvas.

This lesson with step-by-step furniture decoupage photos will show you how to decorate the table correctly and tastefully. Usually the material from which the table top is made is chipboard, boards, solid wood board.

We need:

• Acrylic lacquer;
• roller;
• Sandpaper;
• Vinyl or non-woven wallpaper of the desired shade;
• PVA glue.

As in the previous cases, we clean the cover with alcohol and level it with sandpaper. We measure the dimensions of the cover and cut off the corresponding, even canvas with a small allowance. Then we smear the entire decoupage surface and the wrong side of the wallpaper with PVA glue. Carefully lay the wallpaper, begin to level them with a roller.

Using a roller, we remove air bubbles and level the paper over the entire surface. Let the wallpaper dry. After, we grind the edge of the cover with sandpaper and cover the top layer with acrylic varnish. The finished product will look like it was purchased.

Decoupage of an old stool

In every house, apartment there is an old, shabby stool, which is a pity to throw away. How to turn old stuff into a real masterpiece, a rarity? The answer is simple - napkin decoupage. This technique will help you make a vintage stool without spending a lot of personal time and money. For this we need:

• Acrylic paint and varnish;
• Three-layer vintage napkins;
• PVA glue;
• Brushes with natural bristles;
• Sandpaper.

We begin work, as in all other cases, with leveling and degreasing the surface with sandpaper and alcohol. After cleaning the seat, cover it with two layers of cream, white or beige paint. Let it dry so it doesn't stick to the tools.

We divide the napkin into layers, the top one - glue the pattern outward. We dilute the glue with water in a ratio of 1: 1 and process the surface of the pattern with the mixture. In the process of coating, we align the picture and eliminate the air from under the napkin. Let the glue dry. After, we varnish the surface. Voila! The vintage stool is ready.

Fabric decoupage of a sleeping chest of drawers

Making a chest of drawers with a cloth occurs if it is outdated, shabby and does not fit into the general background of the room. For work we need:

• Pieces of fabric;
• Scissors;
• Sandpaper;
• Pastel acrylic paint and varnish;
• roller.

First, with the help of a solvent, remove the old paint and sand the entire work surface with sandpaper. We cover with a primer and paint with beige or milky acrylic paint. We give time to dry. After, we cover the chest of drawers with PVA glue, and glue the fabric with special glue. We distribute the fabric on the work surface with a roller, remove air bubbles.

Depending on your preferences, choose the color, pattern and number of patches. We leave the fabric to dry, periodically spray glue from the spray gun. This is done so that the fabric does not wrinkle and stick well. We cover the product with a transparent acrylic varnish in several layers, giving each layer a certain amount of time to dry.

Photo ideas for decoupage furniture

Has your kitchen stool outlived its usefulness? Cracks and scratches appeared on the surface, and the legs loosened! Do not rush to throw it away! After all, an old stool can turn into a real work of art.

First, we strengthen the legs and proceed to decorating.

We will need:

1. Stool - 1 piece
2. Sandpaper - coarse and fine
3. A piece of dry cloth
4. Acrylic paint in white, yellow and blue
5. Wide flat brush
6. Napkins with colorful patterns
7. Glue for decoupage (if there is no special glue, PVA or acrylic glue will do, some use egg white or even a glue stick)
8. A little imagination and creative energy!

First things first, we clean the surface of the stool from the old paintwork. To do this, use sandpaper: first large, and then small. If the paint doesn't peel off well, you can use a chisel. The old coating must be removed almost completely, and it is better to trim the surface itself.

Next, carefully wipe the stool with a dry cloth. Now you can apply acrylic paint. We use it instead of a primer, closing all the pores and cracks, and leveling the wooden surface. First we apply one layer, dry it, and then the second, which also needs to be dried.

Now we paint the stool in yellow-green color (to get the green color of the desired shade, you can mix blue paint with yellow). With a flat wide brush, we apply yellow and green strokes to the surface, artistically mixing them one with the other.

Advice. To prepare the surface under the napkin technique, it is better to use light colors, otherwise the result may be unexpected: dark and overly bright colors can shine through the pattern on a thin napkin.

We proceed directly to the decoration. The juicy fruit pattern and the image of glasses with cocktails are perfect for the yellow-green summer color scheme we have chosen. We cut out or tear off all the drawings, then we stratify the resulting fragments of napkins, leaving only the top layer for work, on which the drawing is applied.

Advice. Pay more attention to the composition so that the drawing looks natural and organic. You can resort to the "golden ratio" rule, which is often used in photography.

Then the fun begins: you need to glue the resulting drawings on a stool. It is better to stick with a small glue brush, applying glue on top of the napkin attached to the stool, starting from the center and leading to the edges. This is very painstaking work. It is necessary to ensure that the drawing does not bubble anywhere and does not gather in folds.

Advice. Lightly lift the edges of the napkin with your fingers. This will help avoid bubbles..

Now we take a thin brush and use green paint to draw on the free surface some motifs from the napkins we used.

Something simple will do for this. For example, schematically made, a slice of lemon, various letters, serpentine threads and other squiggles.

And finally, the final step! We cover everything with a layer of protective varnish.

Advice. It is best to cover products made in this technique with varnish in the form of an aerosol..

And now we are no longer a rickety, peeled stool, but a wonderful art object!