Soundproofing material technoelast acoustic super. Instruction "Instruction for the use of rolled soundproofing materials \Technoelast-Acoustic\ and \Technoelast-Acoustic Super\" . Floor construction with adjustable joists

The material is laid in accordance with the guidelines for rolled sound and waterproofing materials Technoelast Acoustic.

Work with the material Technoelast Acoustic S B 350 is carried out in cotton gloves and overalls (clothing should be made of dense fabric, shoes - without heels).

The roll is rolled out on the base and tried on in place. When trying on, it must be borne in mind that the material is laid with an institution on the walls to the height of the finish coat. If necessary, the material is cut to size with a sharp knife.

The material is laid with a soundproof layer to the base.

When laying a web of material in the junction with vertical structures, it is bent to the height of the finish coating. Then move the canvas until it fits snugly against the walls. If necessary, the places of bending of the material are leveled.

In the corner of the room, the sheet of material is cut with a knife to the height of the material lifting onto a vertical wall.

The second side of the material web is folded vertically and a continuous soundproof coating is formed in the corner of the room.

Roll out the adjacent web of material. The material is laid end-to-end along the web. At the ends of the rolls, an overlap of at least 20 mm is formed. The ends of two rolls of adjacent sheets are spaced at a distance of at least 500 mm.

The adjacent rolls are glued together with a masking tape with a width of at least 50 mm. Glue longitudinal seams, transverse overlaps, material overlap in the corner of the room, places where heating pipes pass, etc.

The main function of this roll material is soundproofing. Technoelast Acoustic Super, in addition to protecting the premises from impact noise, provides waterproofing. The basis of the product is fiberglass coated on both sides with a bitumen-polymer binder. On the one hand, the material is covered with a soundproof thermally bonded fabric, on the other hand, with a metallized film that provides additional thermal insulation when laying underfloor heating systems.

Material Technoelast Acoustic Super A 350, the price of which is indicated on our website, is used as hydro and sound insulation of interfloor ceilings.

For the installation of roll materials, you may need products from the Mastics and primers category.

Advantages:

• reduces impact noise by 28 dB;


• has high sound and waterproofing properties;


• metallized film provides additional thermal protection;


• Technoelast Acoustic Super can be bought at an affordable price.

Packaging and storage

Technoelast Acoustic Super is supplied for sale in rolls of 10x1 m, roll weight - 22 kg. Products should be stored in an upright position indoors at a distance of at least 1 meter from heat sources.

This product is able to effectively block any noise, providing a comfortable environment in the house. To buy material Technoelast Acoustic Super A 350, place an order on our website.

Technoelast Acoustic- this is a rolled cushioning soundproofing material for soundproofing interfloor ceilings. The material prevents the spread of impact noise transmitted through the supporting structures of the building. Technoelast Acoustic is produced in two types:

Technoelast Acoustic Super A350- sound-proofing material, made on the basis of fiberglass, on both surfaces of which a bitumen-polymer binder is applied, with a layer of sound-proof thermally bonded fabric on one side and a metallized film on the other side of the fabric.

Technoelast Acoustic S B350– soundproof baseless material with self-adhesive lateral overlap. The material is produced by gluing a metallized polyester film with a soundproofing sheet with a bituminous binder. The self-adhesive side overlap is additionally covered with a siliconized film. The metallized polyester film used in the material is highly resistant to puncture and prevents dampening of the soundproofing layer when laying the cement-sand screed.

Application area

Technoelast Acoustic is used as a soundproofing layer in accordance with the requirements of SNiP 23-03-2003 and SP 51.13330.2011. Most often, the material is used for interior decoration of premises for the installation of a "floating" floor, heated floor and floor on logs, as well as for the installation of interior partitions.

When soundproofing is installed, Technoelast Acoustic is laid with a soundproof layer to the base along the entire plane of the interfloor ceiling without gaps. When arranging floors along logs and partitions, the material is cut into tapes and laid at the points of contact with the base. Side material overlap Acoustic Super A350 welded with a hot air gun. Self-adhesive side overlap at Technoelast Acoustic S B350 additionally rolled with a roller. End overlaps are glued with a self-adhesive sealant tape.

Basic physical and mechanical characteristics

Manufacturing jobs

According to the "Instructions for the use of rolled soundproofing materials Technoelast ACOUSTIC".

Storage

In a vertical position in one row in height, protected from moisture and the sun at a distance of at least 1 m from heating devices.

Transportation

In covered vehicles in a vertical position in one row in height. Loading into vehicles and transportation of material - in accordance with the Rules for the carriage of goods in force for this type of transport.

The material is laid in accordance with the guidelines for rolled sound and waterproofing materials Technoelast Acoustic.

Work with the material is carried out in cotton gloves and overalls (clothes must be made of dense fabric, shoes - without heels).

The roll is rolled out on the base, tried on in place. When trying on, it must be borne in mind that the material is laid with an institution on the walls to the height of the finish coat. If necessary, the material is cut to size with a sharp knife.

Acoustic Super A 350 is laid with soundproof geotextile to the base.

When laying a web of material in the junction with vertical structures, it is bent to a height to the finish coating. The sheet of material is laid with geotextile against the wall. If the edge of the overlap falls on the junction device, it is cut off to the soundproof layer.

In the corner of the room, a sheet of material is cut with a knife to the height of the material lifting onto a vertical wall. A petal of material is freed from geotextile and glued with a building hair dryer.

Rolling out an adjacent roll, form a longitudinal overlap of at least 80 mm. In this case, it is necessary to ensure that the soundproofing layer is closely adjacent to the edge of the adjacent roll.

The overlaps are welded using a building hair dryer.

To form a transverse overlap, a geotextile 150 mm wide is separated from the material, while making sure that the waterproofing layer is not damaged. The end overlaps are also welded using a building hair dryer.

Thus, a continuous sound and waterproofing coating is obtained.

Technoelast ACOUSTIC is a rolled cushioning soundproofing material for soundproofing interfloor ceilings. Material prevents spread impact noise(stomping, knocking and vibration) transmitted through the supporting structures of the building. Technoelast ACOUSTIC is produced in two types.

Technoelast ACOUSTIC SUPER- sound-proofing, waterproofing material with a fiberglass base, on both surfaces of which a bitumen-polymer binder is applied, with a layer of sound-proof thermally bonded fabric on one side and a metallized film on the other side of the canvas. The metallized film used in the material improves the thermal insulation properties of the soundproofing layer.

Technoelast ACOUSTIC S- soundproof baseless material with self-adhesive side overlap. The material is produced by gluing a metallized polyester film with a soundproofing sheet with a bituminous binder. The self-adhesive side overlap is additionally covered with a siliconized film. The metallized polyester film used in the material is highly resistant to puncture and prevents dampening of the soundproofing layer when laying the cement-sand screed.

Advantages

• Impact sound protection
  (stomp and other impacts)
• Increasing the sound insulation index
  (with minimum thickness of materials)
• Sound and waterproofing of premises

Application

Specifications

Work rules

When laying out a roll on a monolithic base, they are tried on in place. If the surface of the substrate is uneven, a leveling screed should be made thick enough to fill the unevenness. When trying on, it must be borne in mind that the material is laid with an institution on the walls to the height of the finish coat. If necessary, the material is cut to size with a sharp knife.

When soundproofing is installed, Technoelast ACOUSTIC is laid with a soundproof layer to the base along the entire plane of the interfloor ceiling without gaps.

When arranging floors along logs and partitions, the material is cut into tapes and laid at the points of contact with the base.

The side overlap of the ACOUSTIC SUPER material is welded with a hot air gun. The self-adhesive side overlap of Technoelast ACOUSTIC C is additionally rolled with a roller. End overlaps are glued