How to make original flower pots from plastic bottles yourself? DIY flower pots for interior landscaping DIY flower pots from plastic bottles

Gardeners and houseplant lovers should definitely know how to make DIY flower pots. Tubs and pots will transform the interior and give a "zest" to each plant. In addition, homemade pots will help save money and get rid of unnecessary items and materials.

Decorative pots provide great opportunities for creativity. They can be painted, decorated with decoupage, ribbons, fabric, accessories, made from different materials and given the most unusual shape.

We do it ourselves

It is easy to think of what pots can be made of.

For flower pots, any material is suitable, including waste material, which does not allow moisture to pass through and keeps its shape well.

Undoubtedly, the most beautiful and comfortable pots are ceramic ones. If it is possible to make a pot on a potter's wheel, then feel free to use it. Clay is the best material for planting domestic and ornamental plants. It retains moisture and allows air to pass through, does not overheat and keeps its shape well.

If it is not possible to make a pot yourself, then you can purchase a ready-made one and figure out how and how to decorate it. There are many ideas for decorating pots. It is not necessary to paint the pot with paints, you can dream up and come up with the most unusual “outfits” for it.

Thrifty gardeners can save on a ceramic pot and make it from improvised materials. The simplest pots and tubs are made from plastic bottles. It is enough just to cut off the upper part, fill in the earth and start planting the plant. However, you can dream up a little and make elegant flower vases from such an unsympathetic material as plastic.

For the manufacture of two variants of pots you will need the following materials and tools:

a bottle of 1.5-2 liters;
CD-ROM;
glue gun;
stationery knife;
marker;
hole puncher;
spray paint.

Working process:

Draw a wavy line in a circle approximately in the middle of the bottle (it can be straight) and carefully cut the bottle into two parts along it (two blanks for pots turned out);

Glue the part with the neck to the middle of the disk (before that, tighten the lid tightly);

When the glue sets, turn the workpiece over and drip a little glue around the edges for stability;

Make holes along the wavy edges with a hole punch;

Paint the resulting pots from a spray can and wait until it dries completely.

Pots are ready! You can plant plants.

To make the edges of the cut bottle even and smooth, they can be trimmed with a soldering iron. You can also give the edges an original shape with a soldering iron.

Hanging pots are also easy to make from bottles. The simplest model is suspended from two sides - by the bottom and the neck. One side of the bottle must be cut lengthwise, and two through holes should be made on the sides with an awl or soldering iron so that the bottle pot can be hung.

In such pots, you can plant plants directly, or you can use them as a planter. If desired, paint the outside of the bottles with acrylic paint.

More interesting models are cats. To make them you will need:

bottles with embossed bottom;
marker;
spray paint;
stationery knife;
soldering iron or awl;
ropes or pieces of strong fishing line (4 pcs.);
sample.

Cut off the bottom of the bottle;

Draw ears by hand or according to a template and cut them out;

Paint the blank from a spray can and wait until it dries completely;

Make a muzzle with a marker: draw eyes, ears, mustache, nose;

To hang the pot, you need to make holes on four sides and thread ropes or fishing lines through them.

Ready! You can plant a plant.

Instead of cats, you can make other animals, for example, a bunny or a bear.

Original pots are easily made using tin cans and clothespins. To do this, you must perform the following steps:

Peel off the label and wash the can, dry;

Attach ordinary wooden clothespins tightly to each other to the wall of the can.

It turned out a small pot, reminiscent of a traditional tub. If desired, you can paint the clothespins with acrylic paints, and so that they retain their original appearance longer, cover them with varnish.

Eco-friendly pots and flowerpots can be made from wood. They will decorate both the apartment and the country house. Wood is a cheap material that lends itself well to processing. However, it is worth remembering that when making a wooden pot, the hygroscopicity of wood should be taken into account. In order for the tub to not start to rot or deteriorate from moisture, it must be treated in a special way - impregnated with moisture-proof agents, covered with stain, varnish or other means.

The easiest way is to assemble a pot from ready-made wooden beams, fixing them with glue or cloves.

Unusual outdoor wooden tubs and flowerpots for a summer cottage can be made directly from a piece of log.

A great idea is to make a simple flower pot out of a plastic bottle. Home decoration with plants has been popular since ancient times. It is good when the house or apartment is spacious - you can be happy to cultivate flowers and greenery. But many of us have to make do with window sill space.

With the advent of products such as pots and flower pots, there are many more opportunities for interesting and original decoration of rooms. Finding a beautiful pot or planter is not an easy task. I would like to add that pots are suitable for both indoor plants and outdoor flowers.

Pots are mostly made from clay and plastic. Less commonly used plastic and ceramics. New clay pots are recommended to be immersed in water for 1 hour before planting flowers. Thus, gases and harmful salts formed during firing come out of the pores. As for the materials from which the pots are made, these are most often wood, ceramics, metal, plastic, rattan, polystone, glass. It is necessary to understand the difference between a flower pot and a planter:

The pot has special holes through which excess moisture comes out. Cache-pots do not have holes. Do not forget that 10-15 minutes after watering, the remaining water must be poured out.

The original planter with muzzles of cats is suitable for the garden and for the windowsill. Make this craft from bottles of different sizes (for example, 2 liters and 0.5 liters).

For work we need:

Plastic bottles 2 liters and 0.5 liters.
Markers.
Acrylic paint or white spray paint.
Scissors.

You need to cut off the bottom of the bottle, and then cut off the top so that you get cat ears.

Then we need to paint the resulting blanks with acrylic paint or spray paint.

The product must be dried and applied with markers. We draw a muzzle of a cat. You can use a template. The template is given in two versions: for a bottle of 2 liters and 0.5 liters.

When the product is ready, pour gravel on the bottom for drainage. Then we pour the earth and plant the plant. Such a planter can be made hanging - to do this, make holes on all four sides and thread 4 ropes of the same size into the holes. Tie all the ends together on the hook.

In such a simple way, you can make not only cats, but also other animals.

So our master class is over. Funny crafts from material that is usually thrown away.

Let's try to make an original planter out of ordinary plastic with our own hands. We have a shampoo bottle.

For work you will need:

Shampoo bottle.
Scissors.
Knife for cutting bottles.
Colored adhesive tape (can be replaced with tape).
Hearts, beads.
Clay Moment.
Insulating tape.

With a knife, cut 2 holes in a plastic bottle. The hole is a long oval. To avoid sharp cuts, we process the holes with electrical tape. We decorate the neck and side parts with colored ribbon.

If you want to plant your flowers in a beautiful decorative pot, but there is no suitable container for sale, you can make a flowerpot from a plastic bottle. A homemade container can be stylized as bronze, gold or any other metal.

To make an original flower pot, you will need:

volume 5 l;
several old newspapers;
napkins;
PVA glue;
dye.

You will need to use scissors, a soldering iron and paint brushes. A glue gun is used to make the base. You can make a pot in a few hours. The finished product is varnished to give the pot a "metallic sheen".

Preparing a plastic container

To make a pot, cut a plastic container in half. Cut off the bottom of the bottle. It will serve as a stand for a flower pot. In the center of the base, you need to cut a hole for the neck of the bottle. Its second half is the main part of the pot.

In the cap of a five-liter bottle, cut several drainage holes to drain water. Without them, the root system of the plant will rot. The pot stand and the main part of it must be fastened with liquid nails or glue using a glue gun.

Preparing flower pot decorations

To decorate the pot, you need to make decorations from newspapers. To do this, roll up a few tubes of newsprint. Then make six "snails" out of the tubes. From five, make flower petals, and use the sixth "snail" as its middle.

When all the decorations are ready, you can start decorating the plastic base of the pot. It is covered with newsprint. Then another layer of PVA is applied to the newspaper to glue the napkins onto the paper. They wrinkle them a little with a brush. Thus, they give the flowerpot a texture. Then the pot is decorated with a flower from newspaper tubes.

Pot painting

When the glue dries, you can paint the pot any color you like. To stylize the pot in bronze, it is painted black with splashes of purple and bronze paint. The flower pot can be varnished to make the flowerpot look stylish.

After the paint has dried, such a pot is filled with a fertile soil mixture and plants are planted in it. In such an original flowerpot, any indoor flower will look great.

We do it ourselves

It is easy to think of what pots can be made of.

For flower pots, any material is suitable, including waste material, which does not allow moisture to pass through and keeps its shape well.

For the manufacture of two variants of pots you will need the following materials and tools:

a bottle of 1.5-2 liters;
CD-ROM;
glue gun;
stationery knife;
marker;
hole puncher;
spray paint.

Working process:

Draw a wavy line in a circle approximately in the middle of the bottle (it can be straight) and carefully cut the bottle into two parts along it (two blanks for pots turned out);

Glue the part with the neck to the middle of the disk (before that, tighten the lid tightly);

When the glue sets, turn the workpiece over and drip a little glue around the edges for stability;

Make holes along the wavy edges with a hole punch;

Paint the resulting pots from a spray can and wait until it dries completely.

Pots are ready! You can plant plants.

To make the edges of the cut bottle even and smooth, they can be trimmed with a soldering iron. You can also give the edges an original shape with a soldering iron.

In such pots, you can plant plants directly, or you can use them as a planter. If desired, paint the outside of the bottles with acrylic paint.

More interesting models are cats. To make them you will need:

bottles with embossed bottom;
marker;
spray paint;
stationery knife;
soldering iron or awl;
ropes or pieces of strong fishing line (4 pcs.);
sample.

Cut off the bottom of the bottle;

Draw ears by hand or according to a template and cut them out;

Paint the blank from a spray can and wait until it dries completely;

Make a muzzle with a marker: draw eyes, ears, mustache, nose;

To hang the pot, you need to make holes on four sides and thread ropes or fishing lines through them.

Ready! You can plant a plant.

Instead of cats, you can make other animals, for example, a bunny or a bear.

Original pots are easily made using tin cans and clothespins. To do this, you must perform the following steps:

Peel off the label and wash the can, dry;

Attach ordinary wooden clothespins tightly to each other to the wall of the can.

The easiest way is to assemble a pot from ready-made wooden beams, fixing them with glue or cloves.

Unusual outdoor wooden tubs and flowerpots for a summer cottage can be made directly from a piece of log. For this you need:

a log or stump of a sufficiently large diameter;
drill with a drill length of up to 25 cm and a diameter of 20 mm;
chisel;
file and sandpaper for leveling the walls of the pot;
impregnation for wood from moisture and decay;
polyethylene.

What to do:

Saw the selected log, making it the desired height (usually soil flowerpots are made from 40 cm);

Using a drill, destroy the core of the log: make several holes in a circle at an equal distance from the walls, and then make holes in the middle;

Using a chisel, remove the middle of the log and align the walls;

Impregnate the wood from the inside with moisture-proofing agents, lay polyethylene and start planting plants.

Also, a log-pot can be used as a planter: put a plastic or ceramic pot with a plant in it.

A few ideas of what else can be adapted for a flower pot can be seen in the photo:

Video on the topic of the article

Below is a thematic selection of videos with master classes.

Very often you can see decorative sculptures on personal plots. This is not cheap in the store. But our enterprising people can always find an alternative to expensive goods. People with creative thinking and golden hands have learned to make garden sculptures themselves from available materials. For example, from car tires, PET containers, wood. This article tells how you can make a planter from plastic bottles in the form of a swan figurine and funny animal faces with your own hands. This work will not require a lot of effort and special costs. Based on this master class, everyone will be able to make an original flowerpot for growing flowers or cultivated plants from improvised means.

Swan planter from a plastic bottle. Preparation of materials for its manufacture

Before starting the creative process, make sure that you have all the necessary tools and materials. We present a list of them:

plastic container with a volume of 5 liters;
PET milk bottles with a volume of 300 milliliters of white color (about 20 pcs.);
a piece of rubber hose or metal-plastic pipe (60-70 cm);
wire thick and thin;
large strong scissors;
candle;
marker;
paint black and red;
household gloves.

When all these materials are prepared, you can start making planters from plastic bottles.

We form the frame of a garden sculpture in the form of a swan figurine

A five-liter container will be the basis of the cache-pot (the body of a swan). Since the purpose of this product is to grow plants in it, you need to make a container for the soil. Put a 5-liter bottle on its side, draw a plastic cut line in a circle with a marker. Mark the hole from the bottom of the container and almost to the neck.

Next, cut the plastic along the line with scissors. You get a bottle with a big hole on the side. Insert a thick wire into the hose or pipe. Place this design through the neck inside the container. Bend the part that remains on the surface, forming the swan neck of the figurine. Make two holes on the plastic next to each other with an awl or burn it with it, preheating it on fire. Pull a thin wire through these holes, grabbing the pipe, and twist its ends from the outside. This way you will secure the hose, which will make planters made of plastic bottles stable.

We make a "feather" for a swan from white PET containers

Cut off the bottom and necks of plastic milk containers. Cut the bottle bodies in length into 4-5 elements, approximately the same in width. On one side, cut the ends obliquely, giving the blanks the shape of feathers. Next, mark the places of the cuts on them with a marker to make a “fringe”, which will visually convey the structure of the pen. Complete this design with scissors. To make plastic planters from bottles in the form of birds look even more believable, you need to give the "feather" a rounded shape. To do this, hold the blanks over the candle for a few seconds. From heating, the plastic will begin to thaw, and the "fringe" will wrap. Make two holes on the finished feathers. Using a thin wire, connect these elements in pairs.

To decorate the neck of the figurine, we perform feathers differently. Remove only the bottom from milk bottles. Cut them into 4-5 strips, leaving the connection at the pebble. Next, proceed to the stage of attaching the "feather" to the frame of a planter made of plastic bottles

Decoration of the garden sculpture "Swan" from PET containers

Feather, connected in pairs, fasten with wire around the entire body of the figure, starting from the tail. Arrange the blanks so that they find one on top of the other. Wear plastic feathers made from bottles with necks around your neck. They should also overlap one on top of the other. Next, the swan needs to form a head. Pierce one blank with a neck in the thread area in two places. Attach the hose to it through the holes. Screw one or two more caps onto the cap from the milk bottle, placing them like parts of the pyramid. Screw the design around the neck of the last bottle around your neck. So you made a swan beak out of caps.

Draw eyes on the sculpture with black paint. Decorate the beak in red. The paint can be used acrylic, enamel for exterior work or any other waterproof. The plastic sculpture dries quickly. Within an hour, you can use home-made plastic flower pots from bottles for their intended purpose - pour soil into them and plant plants. Or, even easier, place flowerpots with an already growing flower in them. Next, choose a place on the site and install your decorative swan there. Such an original figurine will delight you and attract the attention of passers-by.

How to make small hanging planters from plastic bottles: preparation stage

For small-shaped flower pots, hanging planters can be made from 1.5-2 liter PET containers. How to do this, read the next part of the article.

According to this description, you can make a product in the form of animal faces. But according to the same principle, pots are also made with a different decorative design or without it at all. We prepare the following materials for work:

Small pots on pendants: making

Remove the label from the bottle, rinse off the remaining glue with hot water. Cut off the top of the container, it will not be needed in the work. Apply the template to the second half of the bottle, circle it with a marker. Trim the top of the product along the drawn lines, giving the planter the silhouette of an animal's head so that the ears stick out. On the sides of the workpiece, pierce holes through which the rope will be pulled. Paint the entire craft with white acrylic paint. Further, when it dries, decorate the features of the face with other colors: eyes, nose, mouth, mustache, ears. Pull the rope through the holes on the sides. Everything, a planter from a plastic bottle (hanging) is ready. Put a flower pot in it and place it in the intended place.

Categories

Popular