Homemade wooden phone stand. DIY phone stand: how to make? Modular origami: phone stand. Convenient and stylish mobile phone holder in the car

When there are cute cozy little things in the house, it helps to create an atmosphere of warmth. Making something interesting and useful at the same time is not so difficult. Today, almost everyone has a mobile phone. When we return home, we most often put it on the table. It happens that we do not notice and throw paper or other things on top, and sometimes we completely lose it on the desktop. A do-it-yourself phone stand solves two problems at once: you can always make room for your phone and design it yourself.

How to make a phone stand?

Surely you have at least one cardboard box at home. From such junk material you can create something unique. We suggest making a phone stand out of paper and an old box.

1. For work, you need to prepare stationery glue, a pencil with a ruler, a knife.

2. Before you make a phone stand, you need to prepare the cardboard. We cut rectangles measuring 10x20cm. We need 9 of these blanks.

3. Now you need to glue them three by one.

4. On two we draw such a detail. This will be the sidewall of the do-it-yourself phone stand.

5. Cut out. In order for everything to be beautiful and the structure not to lose its stability, you need to lay the sidewalls one on top of the other and check how much they are the same.

6. We take a clerical knife and cut a hole in the form of a rectangle.

7. Next, you need to make the base for the stand for the phone with your own hands. We measure the width of the phone and cut out the stand from the third blank according to the size. The phone's width is the length of our rectangle. The width of the rectangle should be such that it can fit into the grooves on the sidewalls.

8. We assemble the structure. You will also need a small circle of cardboard, its diameter is slightly smaller than the distance between the sidewalls. (photo 8)

9. All blanks must be pasted over with paper. It can be newspaper clipping or scrapbooking paper.
10. To make the back, take two pencils or something similar. We make holes in the sidewalls and insert them there. On the axis we put our circle of cardboard.
11. Do-it-yourself mobile stand is ready!

Another do-it-yourself phone stand option

You can make a simpler version of such a cardboard stand.

Let's remember the good old tree. This ancient, classic material will look very elegant with "modern plastic". The main purpose of the stand is:

• practical use as viewing convenience
• highlighting and fixing a place where you can always find a device, and not search all over the apartment, "remembering where I was with it the last time"
• and of course, stylish interior decoration)

Let's get inspired to create something cool! Not everything can be bought in a store, not for every phone for sure (Take a look at these photos, maybe you already have an almost finished "piece of wood" lying in the pantry for a long time)

or here is a shelf-socket

A few cuts on the bar and we get a simple and practical tilt stand!

See how ingenious and simple! Pocket option.

Imitation of untreated wood, "carelessly" lying on the table

Now it's more difficult. Below is an elegant solution to the age-old problem of the armrest of a sofa or chair. The stand can be brought to a small mobile table.

Now let's take a look at the tablets. With more effort and time, you can make yourself a very beautiful stand for a tablet computer. But you can use it as a monitor.

or like this

In our progressive time it is difficult to meet a person who does not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 or even more binders. Some craftsmen assemble three-dimensional structures from a variety of clips of various sizes. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

In the household, we use a variety of cleaning and detergent products. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of ​​the bottle, cut a hole corresponding to the parameters of the charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or cloth.

paper clips

The simplest and most affordable stand option is an ordinary metal paper clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.

How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone upright is the old cassette holder. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such a useful thing as a phone stand.

It is impossible to imagine a person who would not have a mobile ...

Now it is almost impossible to imagine a person who would not have such a technical device as a mobile phone.

With the invention of this technique, life has been greatly simplified: if you need to call urgently, the phone is always with you, besides this, it is also much easier to find someone ... In general, it makes no sense to describe all the advantages of a mobile phone, since they are really obvious and do not need advertising.

However, today, when we talk about mobile phones, we most often mean modern smartphones, which, in addition to ordinary calls, are capable of performing a lot of different functions. A modern phone is able to instantly access the Internet and find the necessary information there, receive and send e-mails, take amazing photos and video clips of excellent quality, etc. That is why we most often use the phone not as a means of communication, but also as a multifunctional gadget.

It is for this reason that you always want your phone to be always at hand, in the field of maximum availability. In addition, sometimes you need to view photos or videos on your phone, so you want it to be located in the most convenient way for this.

In order to satisfy all these needs, one must, of course, use mobile phone stand. Today in stores you can find a lot of different shapes of accessories. So, for example, many people probably remember the phone holders in the form of a female hand that were popular a few years ago. Nowadays, coasters have become not only more attractive and elegant, but also functional. They are able to charge the phone's battery, report a call, tilt the phone to view from a variety of angles, etc. So everyone, even the most demanding and demanding consumer, will always be able to purchase a product to their liking.

DIY mobile phone stand

However, if you prefer things made by your own hands, which will be a real exclusive, we will tell you how you can make an attractive one yourself. phone stand. There are many different ways to do this, but we will talk about the simplest, and at the same time unusual.

DIY mobile phone stand - 1

The first option is perfect for a phone with a wide display and a fairly long body, such as an iPhone or any phone from the Samsung line. The stand is incredibly comfortable to use and really functional. It only takes 2 minutes of your time to make it.

1. You need a binder (a kind of clip that is used to fasten papers together), as well as a suction cup, which is used to attach, for example, towel holders. So, attach the binder to the suction cup in the place where it has a hook. Voila! A simple and convenient stand is ready.
2. Attach the suction cup to the back of the phone (don't be afraid, it won't damage it and leave no residue when removed) and position the phone however you like, vertically or horizontally, either way the viewing angle will be perfect.

DIY mobile phone stand - 2

The second option is suitable for truly creative natures. In order to make it, you need to master the art of origami.

1. To make such a stand, you need to make 24 white checkmarks and 23 pink ones. Check marks are made in the same way as cranes.
2. Then the white checkmarks are fastened in a circle so that a kind of circle eventually forms. Insert one pink tick between each pair. Thus, you get a cone tapering upwards.
3. Continue the construction to the desired height. Place a mobile phone in the center, and boldly admire the creation of your own hands!

It happens that in some places there is not always a stable connection, in my case, the Beeline operator, since the tower is far away and nearby trees interfere with calmly transmitting the signal. I didn’t want to make any antenna for the phone, I came up with a simpler one, this is a phone stand that could be placed in the place where the connection is stable and does not depend on weather conditions. And about how to make a stand for the phone, I will tell you in this article.

As in any other homemade product, we need to decide on the necessary materials.

In order to make this stand you will need:
* Parquet.
* Board width 8cm.
* Epoxy adhesive.
* Threads, matches.
* Black felt.
* Hacksaw for metal.
* Drill and drills for it with a diameter of 3 and 6 mm.
* Coarse and fine-grained sandpaper.
* Screw length 55mm.

That's all the materials that we need, which is not hard to get, and if there is no parquet, then any strong board will do.

Now you can proceed to the gradual manufacture of the stand.

Step one.
The first step is to determine the dimensions of the future stand, for this we measure the dimensions of the phone that we want to install in the stand in the future, and do not forget to measure the thickness.

In my case, the thickness of the phone turned out to be quite large for the current time, after all, 1.5 cm is not small for a phone in 2017, but all this taking into account the fact that the phone has a protective bumper.
For convenience, we make a drawing on paper or in a program, as I did.

Step two.
After you have decided on the size of the stand, you can take the tools and cut out the main part. The basis in the stand is its so-called back, the dimensions of which are 8 * 9 cm. We take the thickness of the base 5 mm, no more and no less, because we don’t want the stand to be heavy or too fragile due to lack of thickness. To do this, I sawed across an already sawn board 8 * 9, reducing the thickness from 18 to 5 mm.

Now you need to drill a hole for attaching the stand to the wall, first drill with a 3mm drill, then 6mm, but not through, in order to hide the screw head. Then we round the corners with sandpaper.

Step three.
When the base is ready, you can start making legs that, with their design, will not allow the phone to fall.
To make paws, as it seemed to me, is best from the parquet that I found in my garage.

At first it was conceived so that the paws were composite, that is, assembled from two parts.

But due to the loss of strength with such a connection, I decided to make them solid. The result is such a foot in the form of the letter G.

There are three such paws in my design.

Step four.
At first, I did not attach much importance to the appearance, but in the course of manufacturing I realized that all sharp edges needed to be rounded off, which I did.

It is best to round sharp edges with coarse-grained sandpaper. Upon reaching the desired result, we grind with a finer grit to remove all teases.
Also, do not forget to sand the main part, since the surface of contact with the phone should be even.
Step five.
After all the component parts are sanded, you can proceed to fixing them to the base.
For these purposes, epoxy glue is best suited, which I have tested repeatedly and has proven to be high-strength.

Stir with matches one to one the right amount of epoxy glue and smear the places where the paws will be installed.

Epoxy glue dries for a long time, but holding the glued parts with your hands for a long time is simply not enough patience. Without thinking twice, I decided that the easiest way to fasten such a design with thread and matches, wrapping a dozen turns around its edges. Due to the large number of turns of thread, everything is held securely, and most importantly, the parts are pressed quite tightly.
We first glue the lower foot in the middle, and then the two side ones.

I had to tinker a little with the side ones, in this case it is better to ask a friend to help, since two hands were clearly not enough to hold two parts, and also wrap it all around with a thread.

Leave everything to dry completely.
Step six.
The epoxy glue has dried up and despite the fact that the width of the touching plane is only 5 mm, the paws hold very tightly.