How much does a curb stone weigh 200 80 1000. Curb stone. description, technical characteristics - Rosatomsnab. Optimum curb weight and decent quality
The arrangement of near-house territories and garden plots involves the use of fences that play the role of a separator between the garden and pedestrian zones. For this, sidewalk curbs are used.
In addition to the aesthetic function, sidewalk curbs direct water flows towards storm drains, while maintaining the integrity of the roadway.
Types and purpose of standard blocks
The sidewalk curb is one of the varieties of reinforced concrete products that are installed on the blind areas of the sidewalks. It should be noted that there are 4 categories products:
Curb. This is the most common type of stone used to delimit lawns, pedestrian areas and bike paths.
Vibrating curbs. Such products immediately attract attention with an unusual shape and colors. Products can be produced in the form of steps, waves or arcs. The usual gray color of concrete curbs is changed by the addition of dyes and plasticizers. Vibrolithium stones are commonly used as architectural decorations.
lawn blocks. This is a type of curb that usually borders lawns to prevent spreading of the fertile soil layer.
road stone. This variety can be considered a sidewalk curb with a stretch. They are used to maintain the integrity of the roadway, so the products have massive dimensions, reinforcement is required during manufacture.
The technology for the production of sidewalk curbs involves the use of heavy concrete grade M 300 or M 500. This is a prerequisite for the design to have a high margin of safety and resistance to dynamic compression.
Standard dimensions according to GOST
Pavement curbs are manufactured in accordance with the norms GOST, therefore, they have standard sizes, regardless of the manufacturer. According to the state standard number 6665-91 , the product has the following dimensions:
Curb.
Length - 500/1000 mm.
Width - 45/50/80 mm.
Height - 200/210 mm.
Lawn block.
Length - 500 mm.
Width - 70 mm.
Height - 211 mm.
Road block.
Length - 1,000 mm.
Width - 300/450 mm.
Height - 150/180 mm.
Vibrocast curbs have similar dimensions, but do not have a clear geometry.
| small border | Large border | Border garden (vibropress) | Road curb (vibropress) | |
| Dimensions, mm | 500*200*45 | 500*200*70 | 1000*200*80 | 1000x300x150 |
| Weight, kg | 8 | 12 | 25 | 100 |
| On a pallet, pcs | 100 | 100 | 40 | 18 |
| Frost resistance | F200 | F200 | F200 | F200 |
| Grade of cement | M500 | M500 | M500 | M500 |
How much does the side stone weigh?
Given the wide range of sizes, pavement curbs cannot have identical weights (see table above). Here you will also have to divide into groups. It looks like this:
Self installation curb for sidewalk
The sidewalk curb is easy to install, which is an indisputable advantage of this type of product. It is enough to follow this order of work:
The marking of the territory is carried out taking into account the features of the landscape.
According to the markup, pegs are driven in, between which the thread is pulled. This will be the level of the top of the curb.
Then a trench is formed along the entire length of the marked area. Depth is 1/3 from the top of the stone, width - by 10 centimeters larger than the block size.
The bottom of the trench is compacted to prevent subsidence of the soil.
Set the curb to the level of the cord. The stones are leveled in height, placing a solution under the bottom.
The joints are also filled with mortar, the installed curbs are left on 24 hours to set the solution.
Then the free space of the trench is filled with soil, which must be carefully compacted. At the final stage, the installation of the sidewalk is carried out.
Manufacturing technology
Usually, sidewalk curbs are made in the factory, but the production technology is quite simple, so the blocks can be made independently. This option is ideal for homeowners who want to diversify the landscape design of a country house.
The technological process begins with the manufacture of a casting mold. It should be immediately clarified that the form can be purchased ready-made - this is a monolithic structure, convenient for pouring and extracting the concrete mixture. However, the shape can be made independently using sheets of plywood or metal.
The block size can be chosen arbitrarily, according to individual preferences. However, the length of the stone should not exceed 2 -x meters (otherwise the block may break).
Note that for ease of installation, one side of the block should have a slight bevel. This can be achieved by making an appropriate shape or cutting off the excess plume with a machine after the mixture has set.
To prepare the mixture, it is necessary to prepare a cement-sand mixture (proportion 1:3 ). The components are mixed until a homogeneous mass is obtained.
Then crushed stone is added in the ratio 3 parts stone on 1 share dry mix. Water is added to the composition, mixed, preventing the formation of lumps.
After that, the mixture is poured into the prepared mold, after lubricating the walls with used machine oil.
If it is planned to make a reinforced border, the form is half filled, then the reinforcement is installed, the rest of the concrete is added. The surface is leveled with a construction trowel.
To be able to remove the block, the filled mold must stand in a cool place. 3-4 days. After that, the block is removed, left to dry in the open air for another week. After this period, you can proceed with the installation.
Plastic border - an affordable analogue of stone
This is an excellent solution for decorating personal plots. Such garden borders are usually cheaper than concrete counterparts, while being much more convenient in terms of installation. However, ideal materials do not exist in nature, so plastic borders are also not without flaws, but first things first.
Pros and cons of plastic on the garden path
Advantages:
A wide range of. In addition to the usual tape models, on sale you can find decorative elements, imitation of natural stone, brick, wood and metal.
Practicality. If the plastic section is damaged, it can be easily replaced. With sidewalk curbs made of concrete, you will have to tinker much longer.
Long service life. Plastic belongs to the category of durable materials.
Neutral to any environment. Plastic products are resistant to sudden temperature changes, are not afraid of humidity, do not fade in the sun.
Attractive appearance. Such borders are available in a variety of colors, which opens up almost limitless possibilities for decorating personal plots.
It should be noted that the plastic bends easily, which allows you to create winding paths.
If speak about shortcomings, complaints cause such nuances:
Fragile plastic is subject to mechanical damage.
The material burns well.
Doubtful environmental safety.
Typical dimensions and installation
The width of the plastic borders varies within 10-28 centimeters, thickness: 0.5-2 mm.
If we talk about the features of installation, plastic products are much more convenient than concrete counterparts. The key difference is that there is no need for preliminary preparation of the site. A trench is dug along the path or flower bed, about 10 cm. Pointed pegs are clogged here, which are at the base of plastic curbs.
Sections are fastened together with locking joints. The border is leveled, then the trench is covered with soil.
Watch the video: 30 examples of fences for paths, flower beds and beds
Thanks to various standard sizes, it is not difficult to choose a sidewalk curb for landscaping a backyard area. Those who want to save on purchases can make blocks on their own, since the production technology does not look complicated.
In addition, you can arrange paths and lawns with plastic borders, which attract attention at an affordable price and ease of installation. In any case, sidewalk curbs will give the territory an original and complete look.
Pallet dimensions: 1.200x1.000 mm. Height: 900-950 mm.
Pallet weight: 1.498 - 1.759 kg.
Quantity per pallet: 8 - 60 pcs.
Type of packaging: wooden pallet, stretch film, strapping tape.
Recommended unloading: slings on one pallet.
Loading rate:
machine with a capacity of 20 tons (excluding reloading): 11 - 13 pallets;
machine with a capacity of 10 tons: 5 - 6 pallets.
General information:
manufacturer group BRAER (BRAER II), Russia, Tula region, pos. Offended. Products are certified. GOST 17608-2017, 17608-91
To protect the sidewalk from destruction and give it a finished look, it is necessary to use a sidewalk curb, the weight of which will allow installation without extra effort. The vibropressed products of our company meet all the requirements for products of this kind, have a high density, and are much lighter than their counterparts. The weight of the sidewalk curb plays an important role during installation, because if it is too high, then it is necessary to use special equipment for installation, which is quite expensive.
The pavement curb offered by our company, the weight of which is optimal, has a large number of advantages:
- frost resistance;
- moisture protection;
- high degree of rigidity;
- durability;
- aesthetically pleasing shapes and colors;
- smooth, beautiful surface;
- uniformity, allowing you to cut the product if necessary.
Due to the light weight of the sidewalk curb offered by us, as well as the optimal size, customers manage to save not only on installation, but also on the transportation of products, which is very important in Moscow. Special technologies for the production of products under the influence of vibrations make it possible to give them maximum density, and hence reliability. All products are protected from the appearance of cracks and other damage that contribute to the rapid loss of operational properties.
By choosing a high-quality sidewalk curb, the weight of which will not be large, you will receive a number of advantages:
- easy installation, which can be carried out manually by specialists;
- savings on transportation;
- product protected from cracks, cold, shock;
- a beautiful element of the urban landscape;
- functional product that will serve for a long time.
Vibrocompression technology allows you to maximize the extraction of moisture from the concrete mix, reducing pores and making the density higher. This allows not only to reduce the weight of the sidewalk curb, but also to prevent further freezing of water in winter, which is often the cause of cracks. A smooth, intact curb with no cracks or chips at the corners not only looks much better and neater, but also guarantees more reliable and longer functioning.
Optimum curb weight and decent quality
Choosing a really high-quality product in Moscow, you will certainly be satisfied with the result, because it will save money, time and nerves. The small size and weight of the sidewalk curb, as well as the aesthetic appeal, make even the most demanding customers opt for our products. The choice of such a functional and noticeable detail of roads and sidewalks should be taken seriously. The manufacturing company exercises full control over the production process and the quality of the supplied goods, which meets all safety standards. Sidewalk curb, the weight of which will please you, will allow you to easily solve a functional and aesthetic problem.
Curb slabs to complete the paving exterior, produced by vibrocompression, are made by stamping. This allows all tiles to be exactly the same size and shape. And it is precisely these characteristics that determine the quality standard of such products.
Sidewalk border, the weight of which is small, is most often used when framing park and garden areas. Where the weight of the curb tile is already large, its use is necessary for highways, highways, urban carriageways or other large-scale places. The standard sidewalk weight for such an element as a curb varies from 16 to 24 kg. It all depends on the height of the tile, since its width and depth almost always remain unchanged, as well as the place of its application. As for the cost of such curbs, then, of course, it is slightly higher than the cost of ordinary plastic sidewalk curbs, which are also often used today.
FOR CURRENT PRICES AND A COMPLETE LIST OF OUR PRODUCTS YOU CAN FIND AT
Ask a Question
The frequently used definition curbstone"means construction terms" border" and " side stone". The curb is produced according to the specifications GOST 6665-91 .
Curb stone is used in the manufacture of road surfaces as a material that separates the main elements of the roadway from each other. It protects the edge of the road surface from destructive influences and helps to strengthen the main part of the roadway and extend its service life. In addition, it performs decorative functions, and can also serve as a designation of the beginning and end of a certain road zone.
The advantages of this building material are strength and durability at a relatively low cost, as well as versatility: thanks to its aesthetic characteristics and the possibility of choosing colors, it can harmoniously and naturally fit into any design project.
The scope of curbs is quite wide: it is used on roads, in parks, squares, suburban areas.
Depending on the application, borders are divided into the following types:
- For road construction. They are used as a reinforcement and fencing of the carriageway from the lawn, from the stopping area or from the sidewalk; for arranging races and parking lots, they can also serve as a drainage system - for the construction of water runoff guides from the road. A variety of road curbs are main curbs, which are used on highways and long routes. Road curbs are characterized by an increased level of strength.
- For landscaping (the so-called sidewalk or garden borders). They are used for decoration of both the entire area and individual elements of the landscape (for example, fencing flower beds), for zoning the territory both in urban construction and in the garden. Since their main function is decorative, they have a fairly wide range of color variations.
The area of use of the curb stone determines its performance, because it is constantly subjected to high intense loads. Therefore, the main requirement for the material of manufacture is durability and resistance to mechanical stress.
Concrete class depending on tensile strength in bending;
- class of concrete depending on compressive strength;
- strength and crack resistance;
- water absorption;
- frost resistance.
Side stones can be made from fine-grained or heavy concrete. The practical strength of concrete, depending on the performance indicators, should be determined in accordance with GOST 18105. At the same time, for a curb length of 1.0 m made of fine-grained concrete, it is recommended to use vibrocompression technology. Curbs 3.0 and 6.0 m long are made of heavy concrete with reinforcement.
The selection of the concrete composition is carried out in accordance with the recommendations of GOST 27006 and established industry requirements and recommendations. Water-cement ratio - no more than 0.40. Concrete mixtures according to GOST 7473 are prepared using air-entraining additives.
XX 1. 2. 3. 4
Where XX is the designation of the type of stone; 1 - a number indicating the length (cm); 2 - a figure indicating the height (cm); 3 - a number indicating the width (cm); 4 - radius of curvature (may be absent). In addition, the class of prestressing reinforcement can be indicated through the dash sign.
By type, side stones are divided into:
BR - straight privates;
- BU - straight lines with broadening;
- BUP - straight lines with discontinuous broadening;
- BV - entry;
- BL - straight lines with a tray;
- BC - curvilinear.
The type, size and shape of the border determine the area of its use.
If we talk about the cost of a curbstone, then it depends on the technical characteristics and its purpose. Accordingly, sidewalk curbs are more economical with sufficient strength and durability, which makes their use universal.
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
