Technoelast barrier characteristics. Management. Guidelines for the design and installation of waterproofing from self-adhesive bitumen-polymer material "Technoelast-Barrier". Specifications Technoelast Barrier BO

It is intended for waterproofing of shallow foundations, waterproofing of internal premises under a screed, vapor barrier of building structures. It is possible to use where it is forbidden to use an open flame; laying on combustible substrates is possible; laying without additional equipment; laying in a closed, limited space.

Specifications:

Storage

Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.

Packing Details

Packing pallet with rolls - shrinkable white bag.

Brands:

Technoelast BARRIER (BO) obtained by applying a bitumen-polymer self-adhesive binder to a polymer film, consisting of bitumen, a polymer modifier and special adhesive additives. From below, the material is protected with a siliconized release film.

Material specification table:

Manufacturing jobs:

According to the "Guidelines for the design and installation of waterproofing from self-adhesive bitumen-polymer materials Technoelast BARRIER (BO) and Technoelast BARRIER LIGHT". Can be used in all climatic regions according to SNiP 23-01.

Baseless Technoelast Barrier BO is a new generation self-adhesive material. The presence of an adhesive layer on the reverse surface of the waterproofing sheets allows you to avoid fire laying. The coating is in demand for the protection of building structures and structures, if it is impossible to use built-up coatings. Service life more than 25 years.

Material structure

Baseless Technoelast Barrier is made by one-sided application of a bitumen-polymer binder on a polyethylene film. The binder contains polymer modifiers and special adhesive additives. To protect against sticking, a removable anti-adhesive siliconized film is applied to the underside of the waterproofing, and a thick polypropylene film with a logo is applied to the top.

Specifications Technoelast Barrier BO

Applications

Waterproofing Technoelast Barrier BO is used for the following purposes:

• protection of shallow foundations (up to 3 m) from the effects of soil moisture;
• protection of floors in rooms under a coupler;
• protection of bathrooms;
• vapor barrier of building structures (in atmospheric conditions, protection from ultraviolet radiation is required);
• creation of lining waterproofing layers of roofing systems;
• as the bottom layer in a two-layer roofing system.

Mounting Features

For laying baseless Technoelast Barrier BO 20 sq. m. only a cutting tool and bituminous primer TechnoNIKOL No. 4 are required to prepare the surface. Mastic is not needed, as the canvases have their own adhesive layer.

Installation of the material is carried out at a temperature not lower than +5 °C. At negative temperatures, it is recommended to preheat both the base and the waterproofing from the side to be glued. Good adhesion of baseless self-adhesive material is ensured by a specially prepared surface treated with a bituminous primer.

Sheets Technoelast Barrier BO 1.5 mm thick can be laid on leveling layers of the following types:

• gypsum fiber sheet;
• drywall sheet;
• moisture resistant plywood;
• asbestos-cement sheet;
• cement particle board;
• oriented strand board;
• reinforced concrete bearing slabs;
• metal.

Immediately after the bituminous primer has dried, the Technoelast Barrier BO sheet is rolled out over the surface and tried on. It is important that the material fits snugly against the protruding structural elements. Then the fabric is rolled from both sides to the center and the release film is cut in the middle. One of the workers carefully pulls out the protective layer while unwinding the roll, and the second one smoothes the waterproofing with a brush. The presence of wrinkles and folds on the surface is not allowed. The side overlap must be at least 8 cm.

Transport and storage

Transportation of Technoelast Barrier is carried out by all types of covered transport in accordance with the Rules for the carriage of goods in force for this type of transport. Material Technoelast Barrier BO is produced in the form of rolls 20x1 m in size, delivered on a pallet (23 rolls), packed in UV - stabilized film. Roll area 20 square meters (1 pallet - 460 sq.m.).

Rolls of Technoelast Barrier BO should be stored in a dry closed room in a vertical position in one row in height and at a considerable distance from heat sources.

Buy Technoelast Barrier BO in Moscow

The Baurex online store sells original TechnoNIKOL waterproofing materials with a quality guarantee. The certificate of conformity for Technoelast Barrier BO can be downloaded in the "Documentation" section.

Our advantages:

• the possibility of paying for orders for individuals in the amount of up to 100 thousand rubles upon receipt;
• free consultations of technically competent specialists on the range of materials;
• installation supervision services;
• quality control of waterproofing works performed by other organizations.

We arrange delivery of Technoelast Barrier BO in full compliance with the manufacturer's recommendations for storage and transportation of materials.

To place an order, call the phone number listed on the site.

It is intended for waterproofing of shallow foundations, waterproofing of internal premises under a screed, vapor barrier of building structures. It is possible to use where it is forbidden to use an open flame; laying on combustible substrates is possible; laying without additional equipment; laying in a closed, limited space.

Specifications:

Storage

Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.

Packing Details

Packing pallet with rolls - shrinkable white bag.

Brands:

Technoelast BARRIER (BO) obtained by applying a bitumen-polymer self-adhesive binder to a polymer film, consisting of bitumen, a polymer modifier and special adhesive additives. From below, the material is protected with a siliconized release film.

Material specification table:

Manufacturing jobs:

According to the "Guidelines for the design and installation of waterproofing from self-adhesive bitumen-polymer materials Technoelast BARRIER (BO) and Technoelast BARRIER LIGHT". Can be used in all climatic regions according to SNiP 23-01.

For orders up to 100 kg, a budget shipping cost is offered (delivery time up to 2 days):

* Drywall, insulation, lumber, profile for plasterboard, foam block and brick are calculated from the table from 100 kg.

**Delivery over 15 km, the calculation is based on the "tariff" + 50 rubles per 1 km.

For orders of 100 kg or more:

* provided that the ordered goods are placed in a passenger car.

** provided that the ordered goods are placed in a truck of the specified tonnage in terms of volume.

Delivery of unsawn 6 meter lumber (board, timber) up to 2 m3 costs from 3 000 rub.

When paying for delivery by bank transfer, 5% is added to the cost of delivery.

Additional requirements to the car, for example, a small height for entering a parking lot or an open body for vertical unloading is paid additionally: + 20% to the cost of the standard fare.

Delivery terms

If possible, the goods are delivered on the day of the order or on any other day convenient for you.

Unloading and lifting cost

Table for calculating the cost of unloading orders:

* The prices in the table are indicated taking into account a working freight elevator, regardless of the floor.

** In the absence of a freight elevator, the cost of the lift is multiplied by the number of floors to the apartment where the goods need to be unloaded.

*** The minimum order value for unloading and lifting is 500 rub.

Important!

The service "Lifting Material" cleaning of the entrance, removal of garbage and other ensuing consequences, after lifting the building material, is not included in the price. Prepare in advance for the service you ordered. Thanks for understanding!

Foreword. The modern market offers private developers many types of waterproofing. Among them stands out the Russian company TechnoNIKOL, a manufacturer of roofing, heat and waterproofing materials. One of the demanded waterproofing materials of the TechnoNIKOL company is Technoelast barrier - waterproofing for the protection of building structures.

Hydro and vapor barrier technoelast barrier

The Technoelast waterproofing line includes a large number of materials with different technical characteristics, but all of them create reliable moisture-proof coatings for foundations, roofs and other building structures. The most common is Technoelast EPS waterproofing - a Premium class material designed to protect roofs and foundations from moisture.

In the manufacture of Technoelast EPP barrier rolls, a non-woven fiber is used, on which a bitumen-polymer composition with high adhesive power containing a thermoplastic is applied. To protect the roll from sticking when twisting, the material is covered with a polymer film of increased thickness. Technoelast Barrier can be successfully used as a vapor barrier due to its high adhesiveness.

Technical characteristics Technoelast barrier

Technoelast Barrier light can be operated at temperatures from +85 °С to -25 °С. The material is supplied in rolls 1 meter wide and 20 meters long. TechnoNICOL technoelast sheets are glued to the base, maximum adhesion is achieved at a temperature not lower than +15 °C. For waterproofing, various brands of waterproofing technoelast barrier TechnoNIKOL are used.

Technoelast BARRIER (BO)- baseless self-adhesive waterproofing material. The top of the material is covered with a polymer film, on which a layer of bitumen is laid, and the bottom is covered with a siliconized film. Due to the absence of a base, the technoelast barrier has excellent elasticity and flexibility, has a low cost, is simple and easy to use.

Technoelast EPP- multifunctional modified deposited material of increased reliability. Technoelast EPP is recommended for multi-layer waterproofing with shallow foundations and low groundwater levels. Most often, Technoelast epp TechnoNICOL is used in low-rise construction.

TECHNOELASTMOST B- modified waterproofing material of increased thickness. This deposited material is recommended to be used as a foundation waterproofing for shallow, up to 5 m foundation and low groundwater level. Most often, Technoelast b is used in the construction of cottages as a reliable waterproofing between the foundation and masonry.

Technoelast ALFA– modified deposited roll material. It is made from polyesters using aluminum foil, thanks to this metal screen, the material protects the structure from the penetration of gases and vapors. Technoelast alfa is used as a finishing layer in multilayer waterproofing of the foundation of a built house.

Technoelast GREEN– modified built-up waterproofing material with special anti-root additives. The material, thanks to the thickened polymer film, prevents the germination of plant roots and protects the foundation from water. It is recommended to apply, as well as geotextiles, if it is necessary to protect the waterproofing from the action of the root system of plants.

Table. Characteristics of Technoelast waterproofing