Gas boiler Aton (Aton) - an overview of floor and wall models. Gas boilers Aton: characteristics, reviews, prices Gas floor boiler Aton

The Aton gas boiler is very popular among owners of country houses, the installation and operation instructions for which will be given below. Such a device is easy to use and maintain, reliable and economical. With it, you can heat residential, industrial and administrative premises. Installation of such devices is impossible only in settlements that do not have a centralized gas supply system.

There are gas boilers for sale for any purpose, the main ones being 4 models used in the most common cases.

Boilers with a capacity of 10, 12, 16 and 7 kW are in great demand. These models are suitable for heating apartments and houses consisting of 3 rooms and having a standard area. For heating industrial premises and houses of a larger area, high-power devices are required. Characteristics of heaters meet all the requirements of the modern market, so they are installed in all CIS countries. The Ukrainian company "Aton" was one of the first to pass international certification for compliance with environmental safety requirements and since then has repeatedly won various competitions to protect our planet from pollution.

So the high level of security is confirmed by certificates of conformity. The owner of the house is required to install a good smoke exhaust system that will fully perform the functions assigned to it. If natural ventilation is not enough, forced draft will be organized, which will help to remove combustion products to the outside.

Installation technology of the boiler "Aton"

The room in which the device will be installed must meet fire safety requirements. The parapet gas boiler is installed in accordance with the instructions below.

To do this, you will need the following materials and tools:

spanners;
perforator;
chimney;
fum tape;
screwdriver;
fitting;
dowels.

A hole with a diameter of 24 cm is made on the outside of the wall of the boiler room. A section of the smoke exhaust system is mounted in it so that its end protrudes above the plane of the wall from the outside. The chimney is fixed in the wall. Then insert the pipes of the chimney and air duct into the flue. The device is hung on the wall, leaving a gap of 6 cm. The chimney pipe and the duct pipe are connected to the boiler in turn and fixed with bolts.

A chimney protection must be installed on the protruding part of the duct pipe and secured with dowels. The device is attached to the wall through the ears, fasteners are not included in the boiler kit. To speed up the circulation of water in a natural draft heating system, the water heating center is placed below the cooling point of the radiators. The expansion tank must be thermally insulated and installed above the level of the heating system.

If it is impossible to comply with these rules, a circulation pump is introduced into the heating system. It is forbidden to install taps between the expansion tank and the boiler. A qualified specialist with a permit to work will easily install such a device. The Aton boiler must be installed in a specially designated boiler room, in extreme cases in the kitchen. The walls of the boiler room must be built of refractory materials. A boiler of minimum power can be mounted in a window sill niche, provided that a distance of 12 cm is left between the appliance and a window sill made of non-combustible materials.

The chimney must be located at least 2 m from the ground if the wall opens towards a passageway for people. If the wall of the house faces the garden, this distance can be reduced to 0.5 m.

Features of the operation of boilers "Aton"

For heating private houses, double-circuit devices are more often used. They allow not only to heat the house, but also to ensure uninterrupted supply of hot water. The user can independently set the water temperature. The circuits do not interact with each other, so the heating of the home will not depend on the temperature of the hot water supplied.

The instruction manual for the Aton gas boiler is simple and understandable. Ease of control is explained by the automation of the heater. Automation provides the ability to set flexible settings at your discretion. They can be changed at any convenient time. The computer monitors every change in the nodes of the heating system and, in case of breakdowns, turns on a signal to stop the gas supply.

It is necessary to regularly check the readings of control devices in order to notice and eliminate the malfunction in time.

The sudden shutdown of the gas boiler occurs for various reasons, it is important to conduct a thorough diagnosis to identify the problem. Restoration work is not difficult. The specialists of the service company will help you with this. If you have certain knowledge, you can fix the problem on your own, especially since most often work is resumed after cleaning the chimney or burner. Repair of the device must be carried out in service centers.

As a conclusion

The Aton gas boiler has good reviews from users, the device fully justifies the costs invested in its purchase. Functionality, automated control system and long service life make it a bestseller. The boiler has a traditionally high efficiency for such equipment, more than 90%.

Ease of repair and low cost of spare parts makes repairing the boiler easy and economical. The price of the equipment depends on the required power, in any case, it turns out to be lower compared to foreign-made devices. Installation can be done independently if you have certain skills.

Gas boilers

For heating private houses, public, industrial and economic facilities, gas boilers are very often used. They have another purpose - heating water for technical needs. There are a lot of manufacturers of such equipment - both foreign and domestic. Aton gas boilers occupy their niche in the market. Although there are many other brands that produce similar products.

Natural gas is used as fuel for boilers. It is preferred over solid fuels in many regions due to its economy, availability and comparatively low cost.

Types of heating gas boilers

Gas heating boilers are classified depending on:

placements
functionality
thrust type
ignition method
completeness of use of fuel energy

Placement of heating equipment

Depending on the location, the boilers can be:

Outdoor. They are installed directly on the floor or a special platform. In this case, the boilers are steel and cast iron. Heat exchangers of steel products have a welded form, consisting of pipes for the heat carrier and an internal chamber for gas combustion. Steel boilers are characterized by high power and a good efficiency indicator.

Cast iron boilers are usually made with sectional type heat exchangers (due to significant weight) with blast or tube burners. They have an average power factor and a long service life. But they have a significant drawback - cast iron is a fragile material, so certain requirements are imposed on the operating mode of such boilers.

Wall mounted. Sufficiently compact equipment is placed on the wall or in a special frame. They make wall-mounted boilers with copper or steel heat exchangers and a tubular burner. Despite their compactness and low power, mini-boilers are equipped with all the necessary piping elements and a control panel. One of the options for wall-mounted devices are parapet boilers.

Functionality of heating boilers

On this basis, gas boilers are divided into:

Single-circuit - only for heating. If additional water heating is required, capacitive water heaters are connected to them.
Double-circuit. In addition to the heating function, they provide hot water supply. A gas double-circuit boiler heats water in a flow heat exchanger, which can be a separate plate or coaxial bithermic. As an option, a DHW tank is located inside the boiler.

Varieties of traction

Manufacturers produce two types of gas boilers, the designs of which provide for the operation of equipment:

With natural traction. The boiler is equipped with an open combustion chamber, and the combustion air is taken from the room in which the gas appliance is located. Combustion products come out due to the same natural draft. For such premises, appropriate standards are provided.
Forced draft. Air is taken into closed combustion chambers from the street or another room, which is less common, with the help of a fan through air ducts. The products of combustion are brought out. Such boilers can be pressurized or "turbo". The equipment is installed directly in the house or apartment.

Ignition specifics

Boiler - ignition specifics

Depending on the type of ignition, gas-fired heating boilers are:

With piezo ignition - turn on when you press the button manually. This method is non-volatile, so the equipment is not afraid of power outages.
With electronic ignition - the start is automatic. The advantage of this system is gas savings. The igniter does not have to be constantly lit.

Fuel Energy Options

On this basis, gas boilers can be divided into two groups:

Condensing, using the highest point of the calorific value during operation. In this case, the resulting condensate is involved in the process of heat generation.
Convection - their design does not allow the formation of condensate on the walls of the heat exchanger and the furnace. This option is considered traditional, using the lowest calorific value.

How does a gas boiler work

Rinnai gas boilers

The principle of operation of a gas boiler is very simple. When you turn on the electronic or piezo ignition, gas begins to flow. A spark appears, from which the igniter is ignited, and then the main burner, which heats the coolant to the desired temperature. After that, the automation installed on the heating boiler turns off the burner. In this case, the igniter does not fade, but constantly burns. When the temperature of the coolant in the boiler drops, the temperature sensor signals the automation that the valve responsible for supplying gas to the main burner should open. After that, the process is repeated in the same sequence.

All modern heating gas equipment is equipped with automation responsible for safety.

Its functions include the timely shutdown of gas:

when the water level in the heating system drops below the permissible norm
in the absence of traction
when the coolant is overheated

Choosing a gas boiler

Boiler selection

Heating equipment should be selected depending on the size of the room that it should warm up. This should take into account:

outer wall thickness
the number of windows, doors and their area, as well as the type of glazing
underfloor heating and ceiling
the location of the rooms relative to the corners of the house and cardinal points
room area and height
average daily winter outside temperature
desired end temperature inside the house
hot water demand

When choosing a gas boiler, you need to remember that steel models are lighter than cast iron ones, last 10-15 years and are subject to corrosion. Cast iron equipment lasts longer, but requires the installation of a foundation.

Note! Gas is used more economically in boilers with electronic ignition. The burner in them ignites automatically when the hot water tap is opened, and when it is closed, it goes out.

Choosing and purchasing a heating boiler is a responsible task. The consumer must know simple rules to protect himself from blunders:

The power of the boiler must correspond to the power required for heating water.
A boiler with a boiler is more expensive than a double-circuit one, but more comfortable.
It does not make sense to buy a gas boiler with a large margin of safety. A 30% margin is enough.
It is better to choose a boiler with a self-cleaning function.
In simple systems, it is more profitable to use wall-mounted boilers. In complex - floor.
With frequent power outages, it is recommended to use uninterruptible power supplies.

Heating gas boilers TM ATON

Gas floor boiler ATON AOGVMND-7

The ATON Group company produces a range of heat engineering equipment under the brand of the same name. Aton gas heating boilers are distributed on the territory of Ukraine and Russia.

The company's products are boilers:

condensing wall-mounted - Eco Comfort
double-circuit wall - ATON Lux
parapet - ATON Compact
floor chimney - ATON Atmo
hot water - ATON SAAB

Condensing wall-mounted boilers

They are designed not only for heating the room, but also for supplying the house with hot water. Two circuits made of copper are mounted in an aluminum heat exchanger. The uniqueness of such equipment lies in the fact that heat is generated not only when gas is burned, but also due to condensate that appears when the combustion products are cooled.

Condensing boilers:

Environmentally friendly - have a low content of harmful substances in combustion products.
Economical - the use of modern condensing technologies provides a high efficiency of 109% with economical gas consumption.
Comfortable - have a compact size and low noise level.
Ergonomic - easy to operate and maintain.
Reliable - equipped with automation and systems that prevent freezing of the coolant and the formation of scale.
Safe - can work at low gas pressure.

Wall mounted gas boiler

These devices are designed for heating and heating water for household needs.. The systems include a circulation pump and an expansion tank, automation and security equipment. The equipment is completely ready for connection to heating and water pipes. The price of double-circuit boilers corresponds to their high quality and technical parameters.

Their advantages include:

Opportunity to work all year round.
Ease of installation and simple operation.
Smooth increase in power.
Electronic ignition with flame control.
Three speed pump.
Possibility of power regulation.
The presence of systems that protect against overheating, scale and freezing.

Parapet boilers

In a room that does not have a chimney, you can use the Aton parapet gas boiler, the instructions for which are attached. According to the instructions, the combustion products are removed through a horizontal coaxial chimney. This device can pass through an external wall, so it is recommended to place the gas boiler in close proximity to an external wall.

Parapet boilers produce single and double circuit. They are:

reliable and simple
do not require a chimney
do not depend on electricity
aesthetic
are small in size
affordable

Floor chimney devices

TON – Floor-standing chimney boilers

Such boilers are produced as single- and double-circuit boilers with an open combustion chamber. The equipment is designed for heating and supplying hot water to individual and communal houses. They are only allowed to be installed in non-residential premises. Such boilers are non-volatile and operate on low-pressure domestic gas.

The benefits of outdoor equipment include:

compactness
reliability
ease of maintenance
economy
possibility of connection to a single heating system
the presence of a slotted low-flare burner made using laser technology
ensuring the circulation of the coolant without a pump

Hot water gas boilers

They heat the coolant in heating systems with both natural and forced ventilation. Their positive aspects:

operational safety
noiseless operation
no vibration
Possibility of setting with an external controller
economy provided by a two-stage gas burner
durability

Important! The room in which the boiler is planned to be installed must have an area of at least 4 square meters. m. At the same time, the ceiling height must be more than 2.5 m, and the width of the door must be at least 0.8 m. The room must have a window with a window or an opening transom.

During the operation of a gas heating boiler, the spontaneous attenuation of the burner is dangerous. The gas pressure may drop, thrust disappear, the igniter goes out. These situations should be provided for by automation. Therefore, if it malfunctions, the operation of the boiler is prohibited.

Conclusion

You can heat a residential building using gas equipment - floor or wall boilers. They are equipped with both the latest security systems and the simplest devices that allow you to control the operation of the gas unit. But the functioning of any device will be effective only when the equipment is installed by specialists, and the homeowner observes safety measures when operating a gas boiler.

Aton, which will be discussed in the article, are intended for domestic and industrial use. The buyer has the opportunity to choose a model with optimal performance, in hinged or floor-mounted, single or double-circuit versions.

Gas boiler ATON Atmo 16EB

How to choose an Aton boiler?

Before you purchase an Aton gas boiler, you need to familiarize yourself with its features and decide on the following parameters:

Boiler characteristics. Depending on them, the indicators of the system are determined. For example, if you need a heater for a small apartment or house, it makes no sense to purchase a high-power unit, and vice versa. In addition, you can choose a hinged or floor version, for a boiler room or for a kitchen, with or without a mandatory chimney connection.
Matching your system. Certain models have an inlet on the right and an outlet on the left, so when connecting it is important that your heating system has inlet and outlet pipes in the same places. There may be an alternative - universal Aton units with nozzles that can be connected to any system.
Price. As a rule, you have to pay for quality. But if you are an adherent of imported equipment, think about who will repair it in case of malfunctions, and how much the parts will cost. Ukrainian-made boilers are much cheaper, and the quality is high enough to compete with foreign models.
Ease of operation. All new heating models are equipped with a display that shows the entire "life" of the boiler: its main parameters, temperature and information about breakdowns. This makes it much easier to use the unit, but not always the equipment can tell where a malfunction, short circuit or control error has occurred. Aton gas boilers are designed to minimize situations where it is difficult to determine the cause of a breakdown. A working model can independently restart in the event of a power update and turn itself off in case of failures, which makes the task much easier. In addition, modern equipment can adjust the level of the burner to stabilize a specific temperature.
Service and guarantees. The manufacturer gives a three-year warranty on its products. In addition to high quality, the choice is always in favor of a discount, a long warranty period and free maintenance. Therefore, most stores try to sell older models at a discount.

Equipment Features

Currently, there are seven main models of Aton gas boilers on the heating equipment market. Their main distinguishing features can be distinguished:

Equipped with multifunctional gas valves from European manufacturers.
Built-in 3-way motors for proper operation.
Uninterrupted security system.
A more efficient combustion process that reduces the content of harmful impurities in the smoke.
Special burners are made of heat-resistant stainless steel, because the gas is oxidized as much as possible, while efficiency rises from the operation of the combustion chamber.

The company's portfolio includes:

wall-mounted Aton without a chimney;
mini models with a chimney;
high-power household boilers (from 15 to 50 kW).

Let's take a closer look:

A parapet boiler from gas of medium power is produced for space heating without a chimney. It has a DHW circuit and a reliable combustion chamber. Attractive design allows the equipment to fit into any interior. The warranty period for these heaters is three years.
Aton mini-models are distinguished, as the name implies, by compact dimensions, as well as reasonable prices and high quality heating of small apartments. These models do not waste the owner's money in vain, simplicity and accessibility are their main advantages.
Domestic boilers. Such units are produced specifically for heating cottages or office buildings. They perform their functions efficiently and are powerful enough to heat up rooms quickly. The price for such models is relatively high, but in comparison with foreign gas boilers, Aton is cheaper and easier.

Boilers Aton parapet type

The design of such a unit is in many ways similar to the device of condensation technology. The main difference is the presence of a closed-type combustion chamber. As a result, the air that goes to the combustion of gas enters the combustion chamber not from the room, but from the outside. The Aton parapet gas boiler is connected to a horizontal coaxial chimney.

As a result of such a device, the economy and efficiency become higher, and environmentally friendly gas combustion is achieved.

There are parapet-type Aton models, which, in addition to the classic heat exchanger, have a built-in convection casing that allows you to heat the room with greater efficiency. Wall-mounted parapet units, as a rule, are dependent on the mains. Floor mounted models are non-volatile.

Wall mounted boilers

This line includes Aton double-circuit gas boilers, whose functions include space heating and hot water supply. Mounted models have many distinctive advantages that also affect operation:

the heat exchanger is made of special steel 3 mm thick;
the heat exchanger is arranged in a special way and has fire tubes of a special profile, which contributes to an increase in heat output by 15%;
the burner in the Aton wall-mounted gas boiler works without extraneous noise, therefore it does not require additional sound insulation, it is compact in size;
the burner device is carried out in England, the automation in the equipment is German and Italian.

The mounted boiler Aton is equipped with an expansion tank, automation, as well as security equipment. To start the equipment, it is enough to bring the heating pipes and the hot water circuit and connect them to special outlets in the housing.

Floor models

Such Aton units are considered high-performance and powerful (models from 16 kW). One of the latest developments can work with a power of 1 mW!

All models on the market can be classified into the following types:

Floor-standing gas boiler Aton with two circuits - for connection to the heating system and the hot water supply circuit. The water is heated by a copper plate heat exchanger.
Stationary unit independent of the mains - structurally simple water heating stations. Does not need to be connected to the mains. The connection is made to a heating system with natural fluid circulation. There is an atmospheric burner, the air in the room is used for operation.
Single-circuit gas boiler Aton - designed for heating only. There are models that come with a built-in water heater. Some, if the buyer wishes, can be connected to an indirect heating boiler. Requires an electrical connection to function.

Recently, developers have made changes to some models that are related to the operation of the boiler. The upgraded device maintains combustion without a pilot burner. This innovation reduces gas consumption by 10-15%.

Popular models and lines

Quite popular in the market of heating equipment outdoor gas boiler Aton 10E series Atmo. This is a single-circuit unit (only heats the room) with an open combustion chamber and a chimney. There is Italian automation Eurosit.

Another model is Aton Compact 7U, the youngest in the entire line. The power of the unit is only 7 kW, which is enough to heat a room up to 70 m². A distinctive feature of the boiler are the dimensions, reduced in all planes. The unit is single-circuit, designed to equip private households and country houses with heat.

Gas parapet boiler Aton Compact 16EV

Popular series - Aton SAAB. The gas boilers presented in the line can operate in systems with natural and forced circulation of the coolant. Their power varies within 20-80 kW. Units are used for heating residential and non-residential premises and buildings with an area of up to 800 m². All boilers of the series are single-circuit, with liquid heating temperature up to +95 °С. The efficiency tends to 91%. The heater requires a connection to the mains supply, power consumption max. 20 W/h.

Floor gas boiler Aton SAAB-96

And another popular line - Aton Kombi Kompakt HRE. Represented by hinged gas condensing boilers. Power models from 24 to 46 kW. The line is distinguished by the presence of electronic control, a wide range of power adjustments, a system for the forced removal of combustion products, and the need for condensate removal. The boiler has a high rate efficiency(up to 10-15% savings on gas fuel consumption). The equipment works in closed heating systems. The consumed electrical energy is 105-190 W/h, depending on the power of the unit.

The Aton gas boiler is a product of the Ukrainian holding ATON Group, which produces heating equipment for Ukraine and the CIS. The manufacturer offers a large number of modifications that differ in power, installation method and the number of circuits. The manufacturer, using imported components, in fact, performs assembly work. That is why the characteristics of the assembled products are almost as good as those of more expensive, European counterparts.

About company

ATON Group is a holding producing heat engineering equipment under the brand of the same name. Date of creation of the trademark - 2003. Founder - JSC "Krasilovsky Machine-Building Plant". The scope of the company's interests is the production and sale of heating equipment, functionally comparable with European counterparts, in Ukraine and the CIS. The product catalog contains over 70 items, including various types of gas appliances.

What are the benefits?

Advantages of Ukrainian ATON gas equipment:

Only components of European manufacturers.
Affordable price 8 000-25 0000 rubles. Even products from the low price segment meet European standards, are durable and reliable.
High quality knots. Automation allows you to set the temperature of the coolant with high accuracy, adjust the flow of fuel. The heat exchanger is made of steel sheets - cut by a punching press, and then welded. Even at maximum heat, welds retain their integrity.
Wide performance range - from 8 kW to 1 MW. You can choose an option for a room of any size.
Simple operation. Most of the minor work the consumer can do on their own. The principle of operation and design are simple, so it is enough to check the operation of the equipment every six months - the fuel supply setting, etc.
Safe. Thanks to the draft sensor, it is possible to prevent dangerous situations in which the exhausted gases are blown back into the furnace by the wind. When the pressure in the gas pipes drops, the system turns off automatically - there will be no gas leakage.
Elegant design.
Protective powder coating.

How to choose?

Parameters to pay attention to:

Productivity - is selected depending on the area.
The number of contours. The manufacturer offers a single-circuit and double-circuit version. Hot water is heated by a DHW circuit or a built-in boiler.
Depends or not on electricity. The non-volatile type is more valuable, as it is more reliable and self-sufficient.
Design and installation method.

Varieties

Parapet

A parapet or chimneyless boiler is structurally similar to condensing appliances. A distinctive feature is the closed type combustion chamber. Oxygen consumed during fuel combustion enters the furnace from the street. A horizontal coaxial smoke outlet is connected to the device. It is characterized by high efficiency and environmental friendliness. Economical use of energy resources. A number of parapet versions, in addition to a conventional radiator, have a built-in convection casing - for greater heating efficiency. The manufacturer offers parapet models:

Wall. Mostly volatile - they need electricity to function.

The floor version is non-volatile.

Mounted

Are intended for heating of the room and heating of water. Technical features of dual-circuit models:

Steel heat exchanger. Thickness 3 mm.

Profile smoke tubes are used - heat transfer increases by 15%.

Silent burner (made in England).

Automatic block - Italian and German.

Compact size and quiet operation means no need for additional sound insulation. The manufacturer includes in the basic package - an expansion tank, a circulation pump, an automatic unit and a security system.

floor standing

The stationary Aton unit is designed for heating large areas. It can have a capacity of up to 1 MW - this is exactly the capacity of one of the latest modifications of the Aton trademark. Floor versions for ease of choice can be divided into three groups:

2 contour. Connected to heating and hot water supply. Water is heated in a copper plate radiator.

Single-circuit. For heating only. They can be equipped with a built-in boiler or connected to a storage tank. They need electricity.

Non-volatile. These water heating stations are distinguished by their constructive simplicity. They don't need electricity. They are connected to heating, in which the coolant circulates without compulsion. Chimney floor version. There is an atmospheric burner - air circulating in the room is consumed for operation.

The latest models have design adjustments - they do not need a pilot burner for combustion. This solution allows to reduce the consumption of natural gas by 10-15%.

All modifications meet safety requirements. The maximum allowable water vapor pressure is 0.07 MPa. The maximum liquid temperature is 115 degrees.

Installation and connection

The gas-powered device must be installed in a ventilated area. Installation is carried out by specialists, in accordance with the requirements of PB (fire safety). Before connecting the device, make sure that:

system integrity;
stability of gas supply;
serviceability of chimneys;
heat resistance of the surface where the gas installation will stand.

Parapet boiler installation

Need to stock up:

perforator;

wrenches;

Chimney pipes;

Screwdriver;

fum tape;

dowels;

fittings.

A hole d 24 cm is made on the outside of the wall. A chimney section is mounted in it - the end should hang from the outside. Next - fixing the chimney in the wall. Install the smoke and air duct pipes in the gas duct. They are hung on the wall, leaving a gap of 6 cm. The nozzles are connected in turn, fixing them with fasteners. On the protruding part of the pipe, a chimney protection is installed, fixing it with dowels. The device is attached to the wall on the ears.

Instruction

Proper operation is impossible without reading the instructions that come with the device. The main thing that the user needs to read is how to turn on the device:

The control knob is turned counterclockwise.
By pressing the handle, and holding it, press the igniter button.
When the fire appears, do not release the handle - hold for another 10-15 seconds.
The handle is released, the flame should burn powerfully, evenly, stably.
In the absence of fire, steps 2-4 are repeated.

Why does the burner go out?

The presence of reliable automatic protection is the main reason for the extinction of the flame. If even a minor malfunction occurs, the automation turns off the device - the wick goes out. The reason for the extinction of the flame is usually not the device itself, but problems in the smoke exhaust system, in the electrical network or hot water supply. Usually, the wick goes out:

in case of malfunctions or pollution of the chimney;
when the gas pressure decreases.

Why did the igniter go out?

The problem is caused by a power failure. For example, a voltage drop. To eliminate interruptions in the operation of volatile gas equipment, connect a stabilizer.
The igniter often goes out when the nozzles and air filter are clogged. The solution is to clean the clogged elements.
During prolonged operation, the gap and wire contacts in the igniter may be violated. The situation calls for a specialist. You can clean the filter or check the current conductor yourself.
If the flame goes out in isolation from the burner, and at the same time noise is heard from the nozzles, the thrust sensor has probably broken. If the cause is oxidation of the contacts, clean them.
The wick goes out if the thermocouple fails - it can become dirty or burn out. Will have to replace.
It is likely that the cause of the malfunction is the contacts of the automation unit, check them and, if necessary, clean them.

An extinguished burner is always a nuisance, but especially in severe frosts. At low temperatures there is a risk of pipes freezing. The extinction of the flame can be provoked by the wind penetrating through the chimney - reverse draft. As a result, protection is triggered - the device is completely turned off. Traction often causes failures - if it is insufficient, excessive, reverse.

How to prevent wind blowing?

When designing the location of the device, it is necessary to take into account such nuances as wind blowing - whether it happens from the side of the house of interest, and if so, how strong. The chimney diagram must be correct, if it does not correspond to the project, it is necessary to make changes to the device. The pipe that discharges gases should be insulated. It should rise half a meter above the roof ridge. The diameter is selected according to the power of the equipment. To avoid blowing, you need a lot of traction, for this:

Clean the chimney from soot and soot.
Increase the air flow to the maximum. The opening through which the air enters should be located near the floor and as close as possible to the machine.

Model overview

SAAB 20 X-80 XB

Models of the SAAB series are produced with a range of powers from 20-80 kW. Low-power can be installed in private homes, high-power - in industrial and social facilities. Connection of an additional prefix is provided - to remove combustion products. Suitable for old and new heating systems. Efficiency - 91%. Weigh 95-230 kg. Modifications with a horizontal and vertical flue are issued. To adjust the gas supply and temperature, there is a control panel on which there is a thermomanometer, thermostats - working and emergency, LED indication.

COMPACT 7-16

parapet type. For rooms without chimneys. Gas removal - through a two-pipe smoke and air outlet. Thermal productivity - 7-16 kW. 8 modifications. Non-volatile. Install them near the wall facing the street. There are single and double circuit. In double-circuit - a copper coil for heating water. Weight - 35.5 - 60 kg.

ATMO CLASSIC 10-20

Outdoor devices. Heating capacity - 10, 12, 16 and 20 kW. Efficiency - 92%. Weight 43-72 kg. The combustion chamber is an open type. For any system - with natural and forced circulation of the coolant. Single and double circuit. The latter have a summer mode - for heating water in the summer. Heats rooms from 100 to 200 sq.m. Italian burners POLIDORO and gas automation EUROSIT.

ATMO 12.5 E

One circuit. Floor installation. They are installed in non-residential premises - kitchens, boiler rooms, corridors. For systems with natural circulation. Non-volatile. Low hydraulic resistance. Water circulation is provided without a pump. Efficiency - 90%. Weight - 60 kg.

To ensure autonomous heating, it is important to choose high-quality equipment. This is the Aton boiler. It is gas, solid fuel. Due to high technical characteristics, as well as reasonable cost. Therefore, many tend to buy domestic heating equipment.

Advantages of boilers

Gas equipment is common. The advantages include the following points:

No external power supply required;
In addition to heating, boilers also heat water;
Attractive appearance;
Durable powder coated housing;
Easy to manage and use;
There are details of German, Italian and English production.

Aton boilers comply with safety standards and requirements. That is why they are so popular and in demand.

Varieties

Boilers can be single or double circuit. The first option is used only for heating, and the second - for heating and water heating.

There are the following types of boiler equipment:

Parapet - wall-mounted and chimneyless appliances;
Small models of chimney boilers Aton. Their power is 8-12 kW;
Chimney, for heating rooms with large areas. Their power and price are higher - 16-50 kW;
Floor. Used in large rooms. Their disadvantage is their rather large dimensions. Thanks to their attractive appearance, such boilers will easily fit into any interior.

The Aport website contains a catalog with a wide range of Aton boilers. Now it has become easier to make your choice, because the resource contains offers from all online stores in Moscow. You just need to set the desired parameters, and the smart system itself will select the most profitable option. On the resource, it is recommended to read customer reviews, as well as the relevance of prices.

Categories

Popular