The sequence of assembling lamps from water pipes. How to make a cool pvc pipe lamp. Three-arm horizontal illumination

Reading 6 min.

Various interior items made from the most unexpected things and even scrap metal are increasingly becoming decorations for residential premises.

Many craftsmen make lamps from water pipes, both plastic and metal, cast iron, turning a simple plumbing product into designer items that are unusual in appearance.

Water pipe lamp

Self-assembly of lamps from pipes

It is very easy to assemble a lamp yourself from the remains of water pipes. This is completely independent of the material of manufacture. Thinking over the appearance and purpose of a particular lighting device, the style of the room in which it will be located is taken into account. The properties of plastic to be heat-treated are taken into account, metal-plastic pipes are bent, and cast-iron pipes are folded through adapters and connectors into the most bizarre shapes.

The main thing that attracts creators is the cavities into which you can easily pass an electric wire. A variety of cartridges will allow you to choose the most suitable size and simply stick the material in the right place.

A lamp made of water pipes is perfect for a loft or country style room. A pattern carved in a large-diameter PVC pipe, illuminated from the inside, will decorate even the most sophisticated interior.

PVC pipe floor lamp

Making lamps from plastic pipes with your own hands is a very simple process. The material is easy to cut. It can be bent after heating. At the same time, it is not expensive, does not pass electricity and can serve as an additional insulator. But it should also be remembered that plastic is subject to melting and deformation, so lamps should be chosen that do not heat up.

If you use pipes with a small diameter, connectors and tees, you can assemble a structure of any configuration by simply coming up with a suitable design and folding the components according to the type of designer. So, for example, a floor high product, folded through tees, with curved top lines, looks very impressive. Such a lamp can have 4 legs or a wooden round base. The number of installed lamps depends solely on the desire of the creator.

A floor lamp made of a large-diameter pipe, in which patterns are carved, can decorate an artsy living room. Warming up its individual parts with a building hair dryer, you can bend the material and make the pattern voluminous. By cutting off some areas, you can make them more translucent. If desired, paint the surface in any color. All that remains is to fix the light source inside, put everything on a PVC or wooden base and connect the electricity.

The connection of individual elements is strengthened with an adhesive layer, having previously passed a cable of maximum length inside.

For giving

The manufacture of decorative products from old cast-iron pipes is in great demand for use in the country. It can be stylish sconces with large shades or a loft-style chandelier assembled in the form of bizarre curving lines with several lamps at the ends.

Home-made lamps are also appropriate as street lighting, installed on wooden posts and the facade of the building. The main thing to remember is that any metal conducts electricity, so you should take care of reliable cable insulation.

For playground

Homemade versions of pipe lamps are perfect for playgrounds. They can be assembled in the form of a fence by inserting lamps inside areas with a large diameter. This design will reliably protect the light source from mechanical damage, and hidden cables completely eliminate the possibility of injury from electricity.

By fixing the pipe along the perimeter of individual entertainment areas, drilling holes in it over the entire area and inserting an LED strip inside, you can turn the most banal site into a fairy-tale world.

Wall lamp made of flexible metal-plastic

Metal-plastic pipes have 1 significant advantage over PVC products - they bend. A light source with such a housing can be turned in any direction without worrying that movement will lead to breakage.

For assembly, you will need a blank made of wood or thick plywood. A base is made from it, which is attached to the wall. In addition, you should prepare a pipe of the right size, a suitable cartridge, cable, electrical tape.

Installation instructions

First you need to draw the design of the future product, which will show how to make the main components. To work, you will need a drill, a jigsaw, a clerical knife and a few self-tapping screws.

A blank of any shape is cut from a piece of wood or thick plywood. In the place of the intended fastening of the pipe, a hole of the appropriate diameter is drilled.

For full functioning, a pipe of 20-50 cm (or more) is suitable. It is inserted into the hole in the base. Then an electric cable is passed through the pipe. On the reverse movable side, it is necessary to fix the cartridge. If necessary, you can use additional plumbing fittings.

When the flexible metal-plastic wall lamp is fully assembled, it is screwed to the wall with dowels or self-tapping screws, the LED element is installed and put into operation.

Plastic Tube LED Night Light

If cast iron products are more suitable for making loft-style lamps, then delicate white plastic is best used to create night lamps that fit into any interior. They are decorated with openwork patterns of any stylistic orientation, ranging from exquisite floristry to images of fairy-tale characters.

Manufacturing instructions

Making a plastic lampshade is very simple. To do this, you will need a wooden or metal base with a built-in cartridge, a piece of PVC pipe with a diameter of at least 15 cm and a length of 20-30 cm, a drill with a set of drills, a clerical knife.

To begin with, the edges of the future lampshade are ground and a pattern is applied. Then holes of different sizes are drilled along the marked lines. Oblong lines are cut with a knife. If you want to give the image more realism, you can cut off some areas of the surface, making them thinner to increase throughput. You can change the shape and bends of some sections by heating them with a building hair dryer and arching them.

After the pattern is worked out, the lampshade is attached to the base and the light bulb is screwed in. Now the whole structure is assembled and it can be connected to electricity. If desired, the plafond can be painted.

Chandelier manufacturing technology

It may seem to many that when using pipes and plumbing accessories, the chandelier will look rustic and even clumsy, but this is not so. With the right approach and careful execution, they create a work of art even from such simple materials.

Assembly process

For manufacturing, you will need pieces of metal-plastic pipes, splitters, a ceiling socket, cartridges.

To begin with, they think over the design of the future product and the number of lamps that will be installed. In the center of the whole structure there will be a splitter, to which pipes are connected and bent into the desired shape. Wires are passed through the resulting workpiece. Since the cord will pass through several endpoints, it is recommended to run parallel lines into each individual branch, connecting them only under the ceiling outlet, excluding breaks inside the chandelier.

Cartridges are fixed to each pipe at the ends, having previously connected them to the cable. Through a small piece, connect the outlet to the splitter. Then the electricity is connected.

The finished product is painted and supplied with shades. The main thing is that the result pleases the inhabitants of the house.

For a true jack of all trades, the remains of building material are a real treasure. From a pile of rubbish, he is able to create masterpieces suitable for interior decoration and useful for everyday use. Remains of plastic, plumbing fittings, plugs, metal fasteners are enough to create a beautiful and functional pipe lamp that can be hung on the wall or used instead of a table lamp.

If the finished product seems unpretentious to you, you can complicate its design by adding metal parts - pipes, bolts, nuts, fitting legs

Self-assembly of lamps from pipes

Even people who do not know the basics of plumbing can build a product from pipe sections, metal and plastic parts, and it will not be difficult for specialists involved in laying communications every day to come up with their own, unique, interesting options. The suggested instructions are just examples of how quickly and easily unnecessary materials can be turned into useful things.

A plumber's dream - a lamp from a water pipe

For the device of household communications, polypropylene is increasingly being used - a durable, flexible, reliable material that does not give in to rust, which has been performing its functions for decades. Systems are installed instead of obsolete metal pipelines, which are dismantled and thrown into a landfill. Let's take a few used iron parts and make a concise, convenient lighting fixture out of them.

We will need:

1 pipe of arbitrary length;
2 flanges for stands;
cross as a connecting element;
2 knees;
electrical cord with switch;
lamp (energy-saving or LED);
cartridge, clutch for fixing.

If the base diameter is 20 mm, respectively, the rest of the parts have the same cross section.

Strictly technical, rough lamps and cozy home floor lamps are all made from ordinary water pipes.

The assembly process is simple. We connect the knees and flanges with the cross - the stand is ready. We insert the pipe from above, then fasten the coupling. We pass the wires, be sure to make insulation, since the metal conducts current, we screw in the light bulb. A few simple manipulations - and the original lamp made of water pipes is ready!

In order to give the old details an aesthetically attractive look, we clean all the elements with fine sandpaper, cover with paint for metal.

Video: Functional robot lamp made of pipes and fittings

Wall lamp made of flexible metal-plastic

For the wall version, a more dynamic tubular LED lamp is needed, which can be directed in different directions, and here metal-plastic products will come in handy. Unlike plastic parts, they are durable, have elasticity, in other words, they bend.

The ability to bend and take on various shapes will help make the lamp unique

The base, which is mounted on the wall, for convenience, is best made from a piece of wood - solid pine, birch blanks, a fragment of thick plywood. We drill a hole in it for a flexible element. From a small bar we grind the body for the cartridge, given that a movable fragment will be attached on the other side.

A ready-made pipe wall lamp is a great backlight for paintings or photographs

All that's left is to assemble. We insert an electric wire, previously threaded through the base, into a metal-plastic blank (from 20 to 50 cm long), fix the cartridge and produce insulation. We fix the base on the wall, screw the LED element and enjoy the effect. It remains to be added that the flexible tube for the lamp can be turned in any direction, and if desired, even tied in a knot, if the length allows.

The cost of metal-plastic products of medium diameter is low - from 60 to 100 rubles per linear meter

Video: Plastic pipe LED lamp

Three-arm horizontal illumination

A convenient lamp made of several movable copper tubes on a metal base can create full-fledged lighting for a small room or a backlight for paintings, photographs, collages or shelves with souvenirs.

To work, you will need pieces of metal pipes of the same diameter, copper bending tubes for making horns, several tees (according to the number of horns), a half-flange (for fixing the lamp on a wall or ceiling), plugs, electrical wire and fasteners. You will also need lamps - it is better to take LED ones that do not heat the surrounding parts and the illuminated surface.

The tool needed for assembly is in every home:

jigsaw or hacksaw for metal;
pliers;
screwdriver;
drill and thin drills;
insulating material;
paint on metal, brush.

First you need to prepare the copper tubes, then unscrew the base and finally assemble everything into a single structure. We make horns for lamps from copper blanks 30-40 cm long. To do this, they need to be gently bent so that they take the form of a smooth arc. Beware of creases, as the corners on the tubes will spoil the appearance of the structure and will prevent the electrical wire from being threaded. We wind the compression fittings on the ends, thread the wires, fix and isolate the cartridges.

We clean the metal pieces, paint, after drying we twist a long pole out of them. We attach copper horns to it at regular intervals, not forgetting about the safe connection of electrical wires. We fix a do-it-yourself lamp made of pipes on a wall or ceiling so that the rays illuminate the desired area, screw in the bulbs and check. The design in a trendy industrial style is ready.

Plastic Tube LED Night Light

Plastic is easy to process, so there are plenty of opportunities for decorating ceiling lamps and lampshades made from this malleable material. Openwork lamps made of plastic and polypropylene pipes are installed on the floor, on the table, used as a table lamp, night light.

Beautiful designer lamp made of plastic elements and multi-colored light bulbs

We stock up on plastic blanks, get to work. The best option is products with a diameter of at least 15 cm, so that the walls of the finished lampshade do not come into contact with the lamp, even if it is LED. From the tools you will need a drill with various nozzles, drills, a clerical knife, a construction hair dryer.

Operating procedure:

We are preparing the base - a heavy stand with a fixed cartridge, we are supplying an electrical wire. Suitable wooden block or construction of several parts.
From a thick pvc pipe we cut out a segment 20-30 cm in height, we process the edges - this is the future lampshade.
We apply an image on a plastic surface using a stencil - an ornament, a drawing, a pattern.
Using a drill, knife, scalpel, we cut out the extra parts, making cuts, cuts, through holes. We leave some parts translucent, reducing the thickness of the material. We heat with a hairdryer to bend or deform the necessary elements.
We install the lampshade on the base, turn on the lamp.

Video: Table lamp made of polypropylene pipes and fittings

White, not suitable for a bedroom or living room, the color of the plastic can be changed to a brighter shade by painting the surface of the lampshade with special acrylic paints. Finished lamps made of PVC pipes look just magical.

To connect the elements we use threads, bolts and nuts

Taking a cue from designers

The use of old unnecessary things to create unique interior items has long been of interest to designers, engineers, and self-taught craftsmen. Metal and plastic pipes turned out to be a convenient material for creating various lamps, chandeliers, table lamps, floor lamps, sconces. Some of them look modern, suitable for decorating high-tech offices and rooms, while others, elegant and stylish, are appropriate for a modern interior.

Elaborately carved flowers and butterflies transform a plastic pipe into an amazing decoration.

It is curious that magnificent design items that cost a lot of money are assembled from the most common building materials, which means that each of you, if desired, can create your own unique masterpiece, which is not inferior to well-known analogues either in appearance or in functionality.

Author's lighting fixtures are sold at a fabulous price. In fact, making a lamp out of pipes on your own is not a problem. This does not require the purchase of expensive materials or in-depth knowledge of electrical engineering. Consider several options for home-made lighting elements from scraps of various pipes.

Table lamp

The original lamp made of pipes will bring zest. The design can be assembled from scraps available on the farm or you can buy material at a hardware store. After purchasing all the materials, it will take no more than an hour to collect the lamp.

Among the necessary components:

Long and short nipple.
Six elbows for pipes.
The same number of small nipples that serve as corner clamps.
Three destinations.
Drill.
Wire with switch and plug.
Insulating tape.
Hot glue.

First, all pipes are treated with a solvent, the stickers are removed. The light element is inserted into the socket, after which the wire is pulled through the square. The lamp holder is fixed with glue. The design is processed carefully so as not to affect the thread, after which it is left until the adhesive composition dries.

Main stages of work

The subsequent assembly of the lamp from pipes is carried out in the following sequence:

A hole is prepared in the tee for the wire on the reverse side using an electric drill.
Pipes are assembled along the threads by using nipples.
4 corners are taken as the base, three tees are twisted with each other, the regular hole is directed upwards, and the homemade socket is directed to the lower invisible part.
Two interconnected nipples will serve as a holder.
The cable without a switch is pulled through the pipes.
The switch is assembled and connected.
The functionality of the pipe assembled is checked.

This design is easy to fix if you are not satisfied with the resulting design. The result is an excellent and inexpensive night light or work desk lamp.

wall variant

A lamp made of pipes, the photo of which is given above, is made as follows:

The grate is removed from the old street-type lamp. If it fits into the interior, this is not necessary.
A pipeline flange is attached to the cartridge, which will serve as a base fixed on the wall.
Then it is connected to a tee, a nipple and a corner. Another flange is attached, then the wiring is pulled through the pipes.
Lamp height is adjustable.
The lamp is connected to the cartridge, and the switch is mounted.
The flange is attached to the wall with screws, the operation of the device is checked.

The operation will require the following materials:

Luminaire with or without grille.
A pair of black plumbing nipples.
Cable.
Two metal flanges, the diameter of which matches the size of the cartridge.
Screwdriver and fixing screws.

Loft lamps made of pipes with a concrete base

The ceiling is made from several wooden hoops for embroidery and watercolor paper. The whole process is divided into the preparation of the mold, the manufacture of the concrete base, the connection of the wiring, the assembly and fixation of the pipes, as well as the arrangement of the lampshade. The container for pouring can be taken from plastic, its dimensions must be sufficient to withstand the weight of the entire structure.

Initial stages:

Using a knife, make a hole for the cable.
The wire for reinforcement is placed in a container.
The cord is threaded through the pipes with the necessary margin.
Marking tape is used to mark the exit of wires from the solution.

The cord must enter the cement mixture at the point of connection to the switch, then be fed through the middle part of the pipe flange, in which a hole is provided.

Final part

Further manufacturing of a lamp from water pipes is divided into several stages:

A cement mortar is made, which is poured into the prepared form.
The switch is fixed flush with the surface. Pay attention that it does not drown in the mixture.
Mount the flange on top of the mortar, thread four fixing screws through the holes.
After preparing the base, the wires are threaded through the pipes, attaching them to the flange.
Next, the free edge of the cables is pulled to the cartridge, after which the latter is attached inside the pipe.
The light bulb is screwed in, the switch is connected and turned over.
A low wattage lamp can be left open.
For a powerful light element, you will need to build a ceiling. To do this, take two hoops and watercolor paper, the seam is treated with wood glue.
This design allows you to choose any color and used fabric coating.
The finished lampshade is fastened with small screws that are screwed into the inside of the hoop from above, or a thin wire fixed on an additional pipe flange.

LED lamp

The PVC pipe is optimally suited for this device. It is worth noting that this option is equipped with autonomous power supply. The design of the lamp is as simple as possible, anyone can assemble it with a minimum of tools and materials. You will need several pieces of larger pipe for the base, including elbows and fittings, and a smaller diameter PVC pipe for the rack. The system uses a resistor with a power of at least 1 watt. This indicator is designed for 6 LEDs.

The circuit is connected in the standard way. It is recommended to use type. This will allow you to quickly make a nest for it in the pipe and will not require cutting out additional elements in the form of a rectangle for the slide switch. In addition, the switch must not be instantaneous, otherwise you will have to constantly hold the button to operate the device. The lamp made of PVC pipes is equipped with a lampshade. Its painting is carried out in several layers. Otherwise, when the diodes are on, streaks or uneven processing will be visible. A battery of suitable capacity is mounted at a distance of 80 millimeters from the edge of the pipe at the base. You can also adjust the switch there. The main thing is that these details do not interfere with each other.

Loft chandelier made of pipes

Modern trends in the organization of lighting often require taking into account not only the efficiency of lamp elements, but also the chandeliers themselves. They can be created independently from improvised materials, while obtaining an original and inexpensive design. For example, it is available to make a ceiling lamp from plastic pipes. This will require the following components:

Ceiling type socket.
12 branches for cartridges and light bulbs.
Polymer water pipes.
12 small lamps.
A can of special paint.
Paper.
Ceiling socket.

The work begins with the development of a chandelier model and the connection of the branches to each other. You can create both a symmetrical design and an original author's model (it all depends on your imagination). Next, lay out the paper on which the coloring process will take place. Perform painting on all sides and leave the lamp to dry. The ceiling rosette is painted on the visible side. If necessary, spraying on the chandelier can be re-applied. Then it remains only to connect the structure to the ceiling with screws and a flange, and also screw in the lamps. Check the design and enjoy the unique product. By the way, if the configuration of the lamp gets boring, it can be transformed into a different style in a few minutes.

Adjustable table lamp: the initial manufacturing process

This do-it-yourself lamp made of pipes is different in that it can be adjusted in reach and height. Many spare parts are available to find at home, so it's also profitable, as well as out of the box.

Materials used:

Bicycle star.
A pair of metal pipes with a half-inch thread (length - 450 mm).
Flange.
Fitting.
Two knees at 45 and 90 degrees.
Two ¾ copper tubes.
Socket.
Polymer sleeve.
Electrical cable.

The asterisk from the bicycle will serve as the basis. Holes for the flange are drilled in its center, after which it is painted. Then an iron pipe is screwed into the flange. The upper part of the element is attached to the base of the lamp, and the second part with a large diameter is installed in such a way that a sliding effect appears. This will allow you to tilt the top of the structure by moving the top tube.

Final part

To fix the pipe in the lower compartment, a hole is drilled for the fixing screw. A pipe with a diameter of ¾ is soldered, which will allow you to maintain alignment, as well as get an original look. As a stopper, you can use a ¼ bolt, which is attached to the outside handle of the tap. The ceiling can be made in one of the ways described above, attaching it with screws, painting it with copper or golden paint.

The rubber bushing is mounted in the opposite end of the fitting, after which the end of the wire is cut off and pulled inside the pipe to the cartridge. The lamp is screwed into the cartridge, around which the casing is clamped. Such a lamp made of water pipes will make it possible to provide the right amount of light under various conditions. At the same time, its cost is minimal.

Loft-style lighting devices are not just a tribute to fashion, but also a practical economical solution for the main or additional lighting. Consider how to make lamps from pipes on your own, what are the main features of working with the material, what the process of assembling them with your own hands will look like, how to make a hanging chandelier from metal pipes, a wall lamp made of metal-plastic, a table lamp and couplings, and also what difficulties may arise.

Today, anyone can make lamps on the basis of metal, plastic and metal-plastic pipes on their own. To do this, you need to acquire patience, a desire to achieve the planned result, a set of suitable materials and tools, and strictly follow the instructions. The advantages of such homemade products are many:

Low cost of the product.
Ease of standard threaded connection.
The ability to create any design.
Wide access to materials (parts can be bought at the construction market, vtorchermet, easy to find).

Of the processing features of the pipe materials used, when creating fixtures, the following nuances should be taken into account:

All elements connected to the thread must have the same standard and similar characteristics (pitch, diameter, direction).
Metal-plastic pipes should bend well with effort, and their surface should melt during heat treatment (polypropylene analogues are also most often suitable for this role).
If the product is not planned to be painted, then it is better to take galvanized, stainless, copper or brass materials as a basis.
The metal body of the lamps easily conducts electricity, so when installing 220V bulbs on them, they must be grounded.
The shape of metal-plastic lamps is set by means of bends, and cast-iron and metal lamps - with the help of various adapters, pipe sections and fittings.

To facilitate and speed up the process of assembling such lighting devices, it is better to manufacture in accordance with the following algorithm:

Make a drawing / sketch indicating all the elements, their dimensions, characteristics.
Before assembly, paint and dry all components and materials that require this, or decorate surfaces in accordance with design ideas.
Carry out the assembly of the lamp strictly according to the plan.
Install wiring and light bulbs.
Fix the lighting device, check the serviceability by connecting to the network.

Important! One of the most important indicators of the work of a lamp with a metal case is electrical safety. Therefore, for those who do not have experience in electrical installation procedures, it is better to consult an experienced specialist in this field before starting assembly. For internal wiring, a thick conductor with good electrical insulation should be used and positioned so that it does not rub against the edges of the pipes, the sharp edges of which must be removed with abrasive materials. In addition, it is better not to locate the joints of the cores inside such a structure, as far as possible, in extreme cases, to isolate them securely.

Suspended chandelier made of pipes

Consider one of the simplest options for assembling a pendant chandelier based on brass or copper pipes. To make such a lamp you will need:

Five pieces of pear-shaped light bulbs.
Ten pieces of pipe - two sets of 5 of the same length - short and long.
One piece of maximum length as a suspension to the ceiling.
Five adjustable brass hinges.
Set of 5 ceramic bulb holders.
Double wire (selected so that it easily enters the tubes).
A coil of electrical cable.
Insulating tape.
Electrical tool.

Read also How to connect an LED to a 220 V network

Installation instructions

In the manufacture of such a lamp, you must follow the following step-by-step instructions:

mount the wiring by unscrewing the pads on the cartridges and connecting the wires to them, as shown in the image below;

pass the internal wiring from the cartridge through the pipes, connect long and short segments by means of hinges;
tighten the wiring and cut, leaving about 5 cm for switching with the main cable;
screw the cartridge into the edge of the tube segment, which will be located at the bottom of the structure;

screw long pipe sections into a 5-pin fitting, thereby assembling the base of the lamp;
twist the white wires coming out of the branch pipes with a wire of the same shade of the main cable, black - by analogy;

carefully thread the resulting twist with the main cable into the pipe, on which the lamp will be attached to the ceiling surface;

the chandelier is hung on a chain or mounting wire in its place, the bulbs are screwed in, the network is connected and the performance of the assembled lamp is checked

Wall lamp made of flexible metal-plastic

For self-assembly of a wall lamp from metal-plastic pipes, you will need the following components:

A set of metal-plastic pipes with a length of segments from 20 to 50 cm.
A wood base or a piece of thick-walled plywood or other similar material.
Wiring.
Cartridges and lamps for them, as well as fittings of a suitable size.
Saw for metal or pipe cutter for metal-plastic.
Screws, Phillips screwdriver or screwdriver.
Paper, paint, decor materials.
Silicone sealant.

Manufacturing instructions

The process of making a wall lamp from pipes is as follows:

A fragment of plywood or solid wood is adjusted to the shape conceived by design, painted or decorated.
A hole is drilled in it (or several - depending on the number of tubes and light bulbs for them), with a diameter similar to a segment of a metal-plastic pipe.
This segment is inserted into it and sits on glue or sealant.
After drying and fixing, two-wire wiring is passed into it.
From the free end, the segment is fitted.
If the fitting is threaded, you can select the appropriate threaded cartridge for it. If not, the latter can simply be glued to the sealant, having previously connected it to the conductors.
Next, the finished lamp is attached to the wall surface with self-tapping screws or dowels.
The light bulb is screwed in, the wiring is connected to the network and checked.
As a decor element for a fitting with a cartridge, you can choose a floor lamp, ceiling lamp or sconce elements that are suitable in size to improve its design.

The main advantage of a luminaire on a metal-plastic pipe is the ability to change the direction of the light flux due to its slight bending.

Table lamp made of muffs

To make a do-it-yourself lamp from couplings, you will need the following components:

Short and long nipple - just a couple of pieces.
Six couplings (angles).
Six short nipples for their connection.
Three tees for plumbing.
Cord with plug and switch.
Hot glue tool.
Insulating tape.
Drill and other mounting tools.

The scope of such a lamp made of pipes is quite wide - for the main or additional illumination of the working area of the table, workbench and any other place (due to the compactness of the lighting device).

Assembly process

Detailed instructions for making a table lamp from clutches are as follows:

before starting work, all pipe sections, couplings and connections are cleaned with a household cleaner, for example, white spirit, stickers are removed and then dried;
in order to bring the wires to the junction in the lamp, it is necessary to temporarily disconnect the wire from the switch;

then a cartridge of a suitable size is inserted into the coupling. You can fix it either with a thread, or by putting it on glue, with a gun, after connecting it to the wiring;

Not every connoisseur of the loft style can afford to live in a real former workshop - if only because there are not enough abandoned factories for everyone. But the decor in the industrial style is quite affordable. Moreover, you can make it yourself.

To write today's material, we went to a recent conference in Moscow loft picnic Palleto and under the supervision of the masters from The Sarai, they assembled their first lamp from pipes and cut wood. We share with you the subtleties and secrets!

You will need:

Fittings for cast iron or steel pipes: couplings, tees, spurs, barrels, angles (including adapters), threaded flange.
Cartridge with thread and wiring.
Wire with plug and switch.
Heat-shrink tubing.
Drill with conventional and feather drills.
Self-tapping screws.
Decorative light bulb.
Wood cut.

Step 1

Pick up everything you need for the rack. Make sure that the parts match the thread. Mandatory elements: a flange to screw the structure to the saw, and a transitional corner, into the wide part of which you insert the cartridge (we, however, used a coupling).

Step 2

When all the parts are found, go in search of a suitable cartridge with wiring. Ideally, the cartridge should be threaded to fit the angle / sleeve, but you can also take a smooth one if it fits tightly enough into the cavity.

Step 3

Prepare the base: drill holes for the wire in the saw cut (as in the photo): expand the vertical bottom with a pen drill and make a horizontal exit. Pull the wire through the holes.

Step 4

Start assembling the lamp stand. Pull the wire with the switch from the side of the base, and the wiring from the cartridge from the opposite side. Connect the wires and finally twist all the details.

Important!Since the lamp is metal, the wires must be connected and insulated as reliably as possible. Instead of traditional electrical tape, use heat shrink tubing: first fasten each of the two wires with it, then insulate them together again. The tube is seated with a hot air gun, but at home you can try to get by with a lighter.

Step 5

Put the lamp stand on the cut and mark where it will be attached to the screws. Use a thin drill to make holes in these places. Using a screwdriver or screwdriver, screw the pipe structure to the saw cut.

Categories

Popular