Hallways with artificial stone. Decorative stone in the interior of the hallway: some interesting options. The use of artificial stone in the interior of the hallway: photos and pluses

Decorating the hallway with decorative stone very popular now . It is relatively easy to handle , looks modern, fits into almost any design, and unlike natural stone, has less weight and lower prices. You can decorate the hallway with artificial stone yourself, using it as the main type of coating, or as an original small accent in a certain area.

Types of finishing (decorative) stone

For the manufacture of artificial decorative stone, concrete or gypsum is most often used. Externally, the finished surface of gypsum or concrete differs little from each other, and those and other stones can have any texture and color scheme, depending on the chosen style.

1. Stone based concrete it is very durable, can have a wide variety of colors, since all kinds of dyes and other substances are added to concrete during manufacture. Concrete stone is moisture resistant, fireproof, very durable and easy to clean.
2. plaster a rock you can completely make it yourself, but it is less durable than concrete, and without special treatment it is not moisture resistant. But such a stone is easy to process.

When choosing a decorative stone, first of all, you need to take into account your capabilities, taking into account that you will do all the work yourself. To process gypsum stone, you will not need a grinder and a diamond disk, and if you purchase a stone made of concrete, you cannot do without them.

With decorative stone trim it will be much easier to work from gypsum: it is easy to file, grind, putty, paint, in a word, you can create a stone interior in any style. In addition, mechanical damage is easily removed on gypsum, if any occur during the work. Gypsum stones weigh approximately two times lighter than concrete ones. This point is important mainly if you decide to glue the material on drywall.

If the repair is done for many years, then it is better to still prefer concrete, since it is not afraid of moisture and is fireproof, they even sometimes finish fireplaces.

1.Preparation for finishing

First of all, you should calculate the total amount of materials. In the event that the stones will cover the walls in the hallway from floor to ceiling, entirely, then when calculating, you need to exclude the area of ​​\u200b\u200ball openings, and then add about ten percent. Before work, you need to have a complete idea of ​​how exactly the artificial stone will be mounted, where the fitting of the joining parts will be done.

When the stone decor is located around the doors, various niches, fragmentarily on the walls, then they first draw an accurate sketch of the forthcoming processing, and after that all zones are measured. After measurements, the area should be summed up, not forgetting to add 10 or 15 percent for trimming. The more carefully the sketch is thought out, the more you can save in the process of cutting stones. When calculating the required material, it should also be taken into account that the total number of stones of angular shapes will be considered in running meters.

Also, you need to prepare all the tools for work. First of all, these are grinders, especially if a decorative concrete stone is used. If gypsum material is chosen, you can prepare a regular hacksaw. In addition, you will need:

• regular and wide spatula (notched);
• a longer ruler and a simple pencil;
• building level;
• Rubber mallet for tapping already glued stones;
• a file and several brushes of different sizes;
• container for diluting glue;
• stone glue, varnish and acrylic primer;
• a construction gun or a tight bag for sealing joints;
• grout syringe and cloth to remove adhesive residue.

In addition to the above, it must be taken into account that the stone is laid both with jointing (for example, if a texture in the form of bricks is selected), and without it. For example, without jointing, a stone is laid “under slate”. If stitching is required, you need to choose a dye in accordance with the tone of your decorative stone or prefer the “contrast” option. After purchasing the materials, you can begin to prepare the surface.

2.Dismantling the coating

The preparation of walls usually begins with the complete removal of old coatings from the surface. Outdated wallpaper, peeling paint, and even more so, the old tile must be completely removed. The plaster can only be left if it adheres perfectly to the wall around the entire perimeter. If it crumbles, at least in several places, it is better to get rid of it by cleaning the walls to bare brickwork, a wooden beam, or a concrete surface.

If the project involves only partial application of stones, then the previous coating can be removed only where the decoration is provided according to the sketch, making an allowance of about two centimeters. When finishing is done in separate areas, the old coating should be removed very carefully. First, on the wallpaper, you need to mark the edges of the processing with a pencil. The wallpaper, so as not to damage them, is carefully cut out with a clerical knife. The edge of the plaster or other hard layer can be cut with a grinder. If there is glue left from old wallpaper, it must be soaked with water and then removed with a spatula. At the end of stripping, the walls are thoroughly washed several times.

3. Alignment of the walls

First of all, it should be noted that decorative stone trim can only be carried out if the wall is perfectly flat. Otherwise, the wall will be fragile, and it is very difficult to work on a curved surface. If the difference is more than five millimeters, then with the help of putty it is necessary to correct all the errors that the builders left “inherited”. After that, you should carefully wipe the small cracks, small depressions. Close attention should be paid to arches and door openings; cement mortar can be used to seal cracks.

In addition to the wet method of leveling walls (through plaster), there is also a less labor-intensive dry method using plasterboard panels. By the way, you can also hide various communications behind them, and if the corridor is cold, then lay any insulating materials. However, drywall is only compatible with decorative gypsum stone, concrete material implies leveling the wall with plaster, since the partitions will not be able to withstand significant weight.

4.Primer walls

When the putty has dried completely and completely, you can prime the surface. Before this, small roughness on the walls should be eliminated by treating the surface with fine sandpaper. After all the dust from the corridor is removed, you can cover the walls with a primer in two layers. It is better to purchase an acrylic primer.

In the event that only fragmentary cladding is done, then the allowance left on the wallpaper should also be primed. This work must be done properly, if the wall is poorly primed, the stones may subsequently fall off.

This completes the pre-preparation process, and you can begin to lay the facing material directly.

5.Laying stone

Remember that laying stone does not like fuss and haste, it is a creative process. Before starting work, consider the following:

• Decorative stone is usually sold in the form of tiles of various sizes, in which all the edges are uneven. Experts giving advice how to decorate a wall with stone, it is strongly recommended to do the styling in such a way that more or less identical fragments necessarily alternate with smaller or larger ones.
• It is necessary to try to lay the stone so that the seams do not match both vertically and horizontally.

The laying of decorative stone is done in stages. First of all, you need to lay out the tiles on the floor, while forming a composition of stones of different sizes. In this case, your stone wall will look natural and organic. Professional masters sometimes do not do this, they “feel” the stone live, but beginners first need to visually see the intended composition as a whole.

6.Glue preparation

Pour clean water into a pre-prepared container, gradually add dry powder, thoroughly kneading until a homogeneous mass. The proportions of water and powder are usually indicated on the packaging. For a homogeneous consistency, in order to avoid the formation of lumps, it is better to use a special construction mixer.

When diluting glue, you should not rely on "maybe", you need to follow the correct ratio of powder and water, which is offered by manufacturers. As a rule, violation of these proportions affects the quality of the entire installation. If the mixture is excessively liquid, then this will reduce the strength of the entire joint, it is difficult to work with a thick composition, and besides, there may simply not be enough glue.

7.Laying the first row

You need to start laying the stone from the corner. You can choose any angle and move in any direction. In order for the masonry to have support, work is done from the bottom up. In the event that it is supposed to veneer only part of the wall, the area around the arch or door, and not its entire surface, work must begin from any corner of the arch or door. If, based on the sketch, markings are first made on the surface of the wall, then it will be much easier to work. So, laying must begin in the following sequence:

• take a notched trowel, and apply a 5 mm adhesive layer on the first tile;
• place the stone on the wall, according to the preliminary marking;
• press very tightly, and carefully remove excess glue (then it will be extremely difficult to do this);
• next to fix the second tile;
• If the stone is not laid tightly, but with jointing, then you need to carefully observe the required distance.

The entire above process should be repeated until the logical completion of the work. In the event that the entire lining will consist of stones of different sizes, you need to follow the sequence of alternation. But if you have previously laid out the rows on the floor, as recommended earlier, then there should be no problems.

8. Laying out the remaining rows

After the first layer dries, you can start laying the next row. It is worth noting that some brands of glue dry very quickly, and work can sometimes be continued almost immediately. In the process of work, do not forget to carefully form all the seams horizontally.

Carefully ensure that the entire masonry does not fall to one side or is not in the form of waves. After the next row is laid, you need to check with the help of the building level the strict horizontality of your upper borders. Do not forget how to remove excess glue, which will inevitably fall on the face of the masonry.

With a seamless laying method, you must also carefully ensure that the glue fills all joints from the ends with a thin and even layer. If the stones are quite thick, over 10 millimeters, then there is no need to rush to finish the work as soon as possible and lay out more than four rows of masonry at once. Otherwise, everything can slide from a significant weight. This rule is especially true for concrete stones. You should wait until all the glue has set properly, and only after that start laying the next four rows.

9. Corner trim

I must say that the corners, both external and internal, usually receive various mechanical damage the most. For this reason, very often in the hallway it is the corners that are fragmentarily laid out with a decorative stone. This will not only carefully protect your walls, but will also be an original decoration of the entire interior. It is better to place large details of decorative trim only up to the middle of the wall, otherwise a “pressing” effect will visually appear.

Before proceeding to decorative stone trim, you need to purchase, among other materials, corner tiles. Although they tend to cost a little more, their presence will greatly simplify the entire process of further cladding. If for one reason or another this is not possible, then you can give the necessary shape to the tiles by means of a hacksaw, if the stone is gypsum, or grinders, if the stone is concrete. Two methods of laying corners are generally accepted:

1. Fragments of laying are installed simply with an overlap. In order for the ends not to be noticeable at the outer corners, they can be filed a little and gently tinted. For an internal corner, as a rule, such processing is not needed.
2. All edges of decorative stones are ground at an angle (45 °). This option is usually used for gypsum products that are simply processed.

It is necessary to closely monitor the normal alignment of all joints. Glue is applied to pre-prepared stones, then they are located on two sides of the corner and are pressed very tightly against the wall surface. After the end of the formation of the corner, it is possible to continue according to the plan laying the horizontal rows of the entire cladding.

10.Decoration of masonry edges

I must say that the thoroughness of this work is very important, since the whole appearance of the finished masonry will eventually depend on the accuracy of the edges made. Stones for the edges of masonry around arches and doorways need to be selected more than carefully. The ideal option is to achieve the most minimal stone processing and trimming.

All edges sawn off with a hacksaw or grinder must be sanded with sandpaper, tinted if necessary, they should look beautiful and natural. All seams and small chips that have formed on the stones must be carefully sealed and masked.

11. Sealing joints

The joints that have formed between decorative stones are sealed either with putty or with a special compound. For sealing joints, it is best to use a construction gun, but, in extreme cases, a tight bag is also suitable. It is necessary to fill with gypsum putty all the gaps that have formed between the fragments of the finished masonry. Excess should be removed quickly before this mixture dries.

Since the hardened putty usually has a color different from the decorative stone, it is necessary to finish the sealing of the joints by carefully painting over them with paint. Shades of pigments should be selected as carefully as possible.

12. Finishing

The last chord in the work on facing the surface of the walls of the hallway with stone is the finishing of the stones with a special varnish. As a rule, high-quality acrylic-based varnishes look perfect. In those places where the coating is usually exposed to constant contact, three coats of varnish should be applied. Walls that are varnished usually last much longer and look better. To apply varnish, you can take an airbrush or spray gun.

In addition to the traditional steps listed above, you can also decoration of the hallway with decorative stone use additional masonry decoration. Usually it is not always possible to choose the intended color match for different finishing materials that are used in the same room. To achieve harmony, the stone can be tinted on top, or the texture can be emphasized with gold or silver paint, if this matches the style. With the help of the competent use of dyes, it is easy to achieve a very original effect of volume.

Finishing is also the processing of masonry at an angle using an airbrush. This is done with a mixture of pigment, water and ordinary acrylic varnish. So you can not only give the desired color scheme to the masonry, but also close up ugly seams. For strong spraying, a shade darker than the color of the stone should be preferred.

In order for your masonry to look beautiful and spectacular, you need to correctly place the sources of local lighting. As a rule, decorative stone looks good in dim lighting. Several small sconces with yellow light will give the whole room warmth and comfort, cold white light will add fundamentality and rigor - in principle, it all depends on the chosen style.

Decoration with decorative stone in the hallway It goes well with a wide variety of materials: it can be not only wood, but also glass, even steel. That is why designers are increasingly using this material in high-tech, or in the style of modern minimalism. It should be noted that if you decide to clad the walls with dark-colored stone, it is better to make the other finishes lighter, otherwise the corridor will seem gloomy.

Finishing with decorative stone- this is perhaps the best, most practical and effective option for repairs in any hallway. With the help of decorative stone, you can give a certain mood to the room, make the whole interior not only cozy and representative, but also really luxurious. Decorative stone is combined with plaster and wallpaper, as well as with simply painted walls. Therefore, when starting work, do not forget the old and worn out, but true truth: a house begins with a hallway, like a theater with a hanger.

Decorating the hallway with decorative stone - video

Stone decoration of the entrance hall places accents in any interior, becomes a highlight of the design and emphasizes the details favorably. The size, color and texture of the masonry is selected based on the dimensions of the hallway and the stylistic direction.

Hallway design with decorative stone

Natural materials are successfully used to create designs in all directions. The constant improvement of building materials and the emergence of new products simplifies work, helps to save money and create interesting projects. Decorating the hallway with stone is a practical solution, because such a finish is durable, it easily withstands mechanical damage and is easy to care for.

Broken stone in the hallway

For partial finishing of corners, doorways or small sections of the wall, fragments of masonry with uneven, chaotic edges will be a good solution. They look elegant and go well with any type of finish from plaster to wallpaper.

Wild stone in the interior of the hallway

The highlight of wild stone masonry is that you can work with shades and different breeds, create spectacular transitions and shade pieces of furniture. The finish has its own character, it looks antique and reliable.

Flexible stone in the interior of the hallway

If the angularity and roughness of natural wild stone will be appropriate in rustic, classic or eco styles, then elegant modern classics or minimalism will require thin lines and regular shapes.

Imitation of stone in the interior of the hallway

The high cost of natural stone often becomes the starting point in the search for an alternative that could combine the advantages of stone finishing in the hallway and an affordable price.

Stone in the interior design of the hallway

The size of the elements for decoration, their color and texture dictate the way the hallway is decorated. The chosen design style of the apartment, the degree of natural light and the size of the corridor are also taken into account. Sometimes just a few areas are enough to complement the design, and sometimes the stone finish of the hallway becomes a central element in the interior. When deciding how to lay out a decorative stone in the hallway, it is difficult to resist the temptation to recreate the stone corridor in the castle.

Stone in the hallway on the walls

Decorating a wall entirely with stone is rare in small dark hallways, but in a bright corridor of a private house, stonework becomes an excellent backdrop for furniture and hanging decor.

Corners in the hallway in decorative stone

External and internal corners always receive more mechanical damage. A stone or its imitation will protect these parts of the wall and at the same time become an interior decoration.

Arches in the hallway made of stone

The spectacularly designed round vault becomes a highlight of the design, the room becomes a smooth transition from the corridor to the living room.

Mirror in stone in the hallway

With wood, natural textiles and leather elements, the entrance hall with stone elements looks expensive and warm; in a modern interior, against the background of plastic and glass, stylish original solutions are obtained.

How to decorate the hallway with decorative stone?

The design of the corridor with his own hands resembles the laying of ordinary tiles. All work can be divided into several main stages.

Reading time ≈ 4 minutes

The use of decorative stone in interior decoration allows homeowners to give the rooms at their disposal a unique and stylish appearance. In addition, the use of this finishing material is a guarantee that the renovated premises will delight their owners with an ideal appearance for a long time, without requiring special costs for their additional or new overhaul.

The corridor in an apartment or house, due to its specificity, is a room whose walls are subjected to constant mechanical stress. In addition, often this room is located in close proximity to the street, which means that it experiences constant temperature changes. All this negatively affects the safety of wall decoration, and therefore, the same wallpaper or painting can very quickly become completely unusable. As a result, for finishing the corridor, it is desirable to use materials that have increased resistance characteristics both to physical influences and to temperature and humidity changes.

The ideal material for finishing the corridor

Decorative stone in the corridor is an ideal option, allowing not only to take into account all of the above factors, but also to give the room a completely unique design, which distinguishes it from other finishing options. Despite the apparent complexity of decorating the walls of the corridor with decorative stone, most of the preparatory processes are much simpler than, for example, wallpapering or painting.

This material is attached directly to the surface of the walls, often without plaster and other preparatory layers, using special adhesive mixtures or solutions. It is worth noting that such a simplified technology for attaching decorative stone is possible in cases where the curvature of the walls is not very large or the structure of the stone is rather rough and provides for large irregularities along the plane of the wall.

Technological nuances of laying decorative stone

• For facing the corridor with decorative stone, both natural material from various types of stone, and artificial imitation of various types of stone can be used.
• Depending on the requirements of the design project, decorative stone can be laid either end-to-end or with a certain seam. The width of the seam may vary, according to the size of consumables.
• Before laying the stone, the contractor will need to ensure the strength and sufficient adhesion of the walls, since this type of finishing material is usually heavy. For this purpose, the walls must be impregnated with special primers.
• Depending on the type of stone, it is worth using either special mortar polymer-cement mixtures or adhesives.
• Laying decorative stone has much in common with laying ceramic tiles, as both processes use the same techniques and tools.
• If the wall decoration in the corridor provides for the laying of decorative stone with dressing with seams, at the end of the process, it is necessary to fill the resulting seams with a mortar or a special mixture to give a finished appearance to the laid out areas.
• As an option, some types of stone, especially soft rocks, are impregnated with special compounds and varnishes after laying to preserve their surface from damage, as well as ease of cleaning.

Features of the design of the corridor with decorative stone

Options for decorating a corridor with decorative stone can include not only a solid stone laying of the wall, but also imply the possibility of combining it with wallpaper, painting or cladding with other piece materials. Laying decorative stone in the corridor requires a pre-designed design project for the room, in order to select the best options for finishing.

Using the photos published on our website, which clearly demonstrate the options for laying material on the walls, anyone, even an inexperienced performer, will be able to master the technological skills of the process, as well as decide on corridor design options.

One of the most beneficial stylistic solutions is a combination of wallpaper and stone cladding. This combination of materials favorably emphasizes the geometry of the room, has a rich and sophisticated appearance. We will tell you in what sequence to carry out the work, and what are the features at each stage.

What materials will be needed

There are quite a lot of varieties of decorative stone for interior work, some of them require the use of a special type of glue. And despite the fact that the surface of the walls can be represented by different materials - from OSB to ordinary plaster - you should take care in advance of the correct choice of binder in order to ensure the highest quality and durable result of the combined finish.

For gypsum decors, a special glue for stucco molding is optimally suited. You will also need a high-quality primer, because the back side of the gypsum stone is very dusty, it must be impregnated to obtain the best adhesion. Due to the low weight, this finish does not require high adhesive strength, but the quality of the coupling must be very good.

Sand concrete artificial stone can be laid on ordinary cement mortar. The main role in the choice of glue here is played by the base material - it is better to use tile glue for laying on drywall, it is better to glue such a stone on wooden surfaces with liquid nails.

Limestone, sandstone, tuff and other sedimentary rocks have a fairly high porosity and practically do not generate dust. They can be easily glued to almost any type of glue, including Perlfix gypsum. In turn, natural stone of igneous rocks, such as basalt or granite, has a low porosity and therefore requires laying on a special polymer adhesive for stone.

Also, do not forget that the front surface of the stone will eventually have to be treated with a water-repellent composition. It can be either antistatic water-repellent impregnation, or a regular varnish for interior work.

Where the stone will look appropriate

Since we have already touched on the topic of finishing the hallway, it is worth briefly mentioning the basic rules for interior design of such premises. As a decorative element, stone is used mainly for contouring portals, door slopes and niches.

For small rooms, stone finishing the entire plane of the walls will be a losing option. The hallway in this case will be very squeezed and gloomy. But if you use pastel-colored wallpapers with a slightly pronounced texture, the stone will be quite an appropriate accessory.

With the help of stone decors, you can add some variety to walls with a significant length and height. It is not worth laying out panels near the floor and ceiling with a stone, so it will not be possible to ensure the correct adjunction of the plinth and moldings. You can lay out pilasters, rustication of external corners with stone. It would also be quite appropriate to look at a stone frieze along the entire wall at a level of 90-120 cm from the floor.

A particularly effective technique is considered to be framing panels, mirrors and areas covered with photo wallpaper with stone decor. In the hallway, the entrance door opening is traditionally framed with stone: with a light tone of the main finish, a modest single-row stone cladding along the inside of the slope will be appropriate;

Preparation of surfaces for finishing

As a rule, stone-lined areas form a ragged edge. To avoid difficulties with trimming the wallpaper, it is better to glue them first, and then carry out the stone finish with a slight overlap on the paper. To do this, you must first draw the contours of the areas for stone finishing on the wall and apply the second line of the contour with an indent inward of about 10-20 mm.

Due to the different stone and wallpaper finishing techniques, the preparation of the walls may have some differences. Under the wallpaper, it is recommended to apply a layer of finishing gypsum putty of the order of 1-1.5 mm in order to create a dense and durable crust with good adhesion to paper glue. The boundary of the putty coating is the outer contour of the areas with stone - the spatula is attached exactly along this line and stretches in the opposite direction. Subsequently, the putty walls are rubbed with an abrasive mesh and opened with a deeply penetrating soil, thereby removing dust and hardening the surface, as well as facilitating the removal of wallpaper during the next repair.

Puttying the areas on which the stone will be glued is not necessary and even harmful. In order for the finish to hold for a long time and confidently, it is necessary to ensure the minimum thickness of the adhesive seam and the smallest possible number of preparatory layers. Thus, the stone must be glued directly to the bearing layer of the wall, a layer of leveling plaster is allowed. Impregnation with a reinforcing primer for concrete surfaces is required.

wallpaper sticker

There are no special differences in the technique of wallpapering. The main finishing can be carried out in advance, but the starting canvas is always located close to the stone decor. It is necessary to beat off the starting line with a plumb line in such a way that the width of one canvas is sufficient to cover the torn edge. The main highlight of such a combined finish lies in the trimming of the edges of the canvas along the contour of the internal markings.

The most suitable type of wallpaper will be those that do not require impregnation with glue and swelling, that is, non-woven and some types of vinyl. It is much easier to cut a dry canvas, so about half of the vertical strip is first covered with glue, the wallpaper is applied and joined to the previous canvas. Further, along the internal marked contour, the wallpaper must be carefully cut with scissors or a blade.

When the edge of the canvas exactly matches the markup, you need to turn it slightly to the border with the glued half, cover the rest of the wall with glue, avoiding getting into the area reserved for the stone. When the glue is applied, turn the second edge of the canvas back into place, let it shrink for a few minutes and smooth the canvas completely.

Stone cladding

For gluing the stone, you should use high-quality glue, optimally if it is a commercial dry mix or a ready-mixed mortar. In some cases, plastic adhesive-sealants in tubes can be recommended.

The technique of gluing a decorative stone is simple: the glue is first applied to the wall with a spatula with a fine comb (2-5 mm), then the back side of the element is wiped. There is no need to apply glue over the wallpaper, so the stones remain unglued about 15-20 mm from the edge. Each stone is pressed against the wall with considerable effort, aligned with neighboring elements until the minimum width of the joint is obtained. Another cladding technique involves stitching, in this case a constant thickness of the seam is normalized between the stones with crosses, it is also possible to use a stitching rail or metallized tape.

For each decor element, a different sequence of filling the area for cladding is preferable. So, for slopes, it is better to take the door frame as a guide and display the torn edge in the opposite direction. If the slope passes into the platband, the outer part of the corner is faced first. The stones adjacent to the corner are cut obliquely, after which the lining of the inner surfaces of the slope is carried out.

For decors that are adjacent to the wallpaper on both sides, it is not necessary to follow a specific installation order. It is only important that several stones that protrude most strongly on each side are laid strictly in one line, which will ensure visual harmony of the decorative element. One key rule also applies: only vertical edges are left torn, while the horizontal borders of stone cladding are mostly straight.

If you want to create an original design in the hallway, we recommend using a finishing material called "artificial stone". It completely imitates the appearance of natural stone, but at the same time it costs several times cheaper. Due to its light weight, decorative stone is easier to install. But the most important advantage of this material is a huge selection of shapes, textures and colors that can satisfy the needs of the most capricious designer.
Decorating the hallway with decorative stone can be done with your own hands, without spending extra money on specialists. To do this, just read our article and follow the recommendations given exactly.
Finishing the hallway with artificial stone

For interior wall decoration, there are two types of artificial stone:

1. with a plaster base;
2. with a concrete base.

To understand which option is better, let's compare them.

• Gypsum stone is easier to process, unlike concrete, it does not require a grinder with a diamond blade to cut it.
• Gypsum stone weighs about 2 times lighter than concrete. The weight factor is important if the decision is made to glue it on drywall.
• As for appearance, an untrained person will not be able to tell the difference between gypsum and concrete at a glance. Both options have a rich color and texture collection.
• If we compare prices, gypsum options will cost an average of about 800-950 rubles per square meter. m. A concrete stone will cost 1000-1500 rubles.

Gypsum stone

concrete stone

There are regular and corner tile elements. As a rule, corner elements cost twice as much, so you can save money by using only ordinary stones and joining them yourself.

As you can see, an artificial stone made of gypsum wins on all counts. Its only drawback can be called lower strength and fear of moisture. But even here there is a way out in the form of a gypsum polymer stone covered with a protective layer.

An additional way to protect against moisture is to treat the surface with stone impregnation or acrylic varnish. They will slightly wash away the structure of the material, but they will protect it well from contamination.

Finishing technology

Finishing with artificial stone begins with the preparation of the base. Remove old finishing materials, remove irregularities. If the wall has differences of more than 5 mm, you need to plaster it. For good adhesion of materials, the walls are treated with a primer.

In order for the decorative stone to look harmonious on the wall, we advise you to lay out the tiles on the floor before starting work and achieve a more natural surface, that is, arrange them so that there are no too sharp differences in heights, colors and cracks.

Sticking decorative stone on the wall
For gluing, you can use liquid nails or special gypsum glue. All-purpose cement-based glue is also suitable, but when working with it, it is important to be especially careful so that there are no dark spots and smudges.

Finishing doorways always starts from the corner. To control the slope of the surface, a bubble level is useful.

Cutting decorative stone

If necessary, a gypsum stone can be sawn off with an ordinary hacksaw, and a concrete one with a grinder.

There are three ways to join tiles at the corners:

1. use special corner elements;
2. overlap tiles;
3. grind the edges with a grinder at an angle of 45 °;

To get a beautiful effect, you can make the edge tiles more “broken” by trimming the edges with a knife, sandpaper and a file.

stone hallway lighting

Finishing the corridor with decorative stone looks more interesting if you install additional lighting from the side and from above. Avoid frontal wall lighting.

After laying, small defects may appear on the stone: chips, sharp color changes, cracks. They are fixed with an airbrush. To do this, prepare a mixture of color, water and acrylic varnish.
The whole process of work is shown in the video clip:

To give an expressive look to a stone wall, you can apply at an oblique angle a finishing spraying of a color darker than that of a stone. Another design "trick" is highlighting the contour along the edges with the help of bronze or gold pigments that will shine when exposed to sunlight.

Decorative stone in the interior will last longer if it is treated with matte acrylic varnish. Lacquer is applied with a spray gun or airbrush. It is especially important to do this in contact areas, where walls are most often touched.

Beautiful design of the hallway, trimmed with stone.
Artificial stone goes well with wallpaper and decorative plaster, but more often it is combined with painted walls. When choosing a paint color, you need to choose a harmonious combination for decorative masonry, and then the hallway will look great.