A simple do-it-yourself shoe dryer. DIY shoe dryer: simple and original designs DIY shoe dryer cabinet
Today, stores offer a huge selection of clothes dryers with different sizes and designs. It would seem that even a picky buyer will definitely find a suitable fixture. But a homemade dryer has undeniable advantages.
First of all, it is cost savings. When it comes to not a simple electric hot rod dryer, but a good drying cabinet that costs a decent amount of money, the ability to make such a device yourself looks very attractive. But in fact, in this, in fact, there is nothing complicated. Let's see how it works, and what materials will be required to create a do-it-yourself dryer for clothes and shoes.
The principle of operation of the drying cabinet
Let's start with the fact that such a device can be used both for quick drying of freshly washed clothes and for drying street clothes and shoes, which is especially important in the off-season.
Drying in the cupboard can be done by blowing warm air with a fan heater or by using economical and silent infrared heaters. With the advent of the latter, the question of choosing a heat source was decided by itself.
Infrared heaters are absolutely safe, very efficient and operate with a minimum of energy consumption. Their location in the upper and lower parts of the cabinet (and, if desired, on the side machines) in combination with ventilation openings to remove moist air and supply fresh air - this is, in fact, the whole secret of the design. But let's talk about everything in order.
The progress of the drying cabinet
The first stage of work will involve the construction of a wardrobe with shoe racks and clothes hangers. We will consider the option of constructing a structure for the hallway, but if you wish, you can install several rods in the closet or stretch a clothesline, which will allow you to use it to dry freshly washed laundry. 
- When the walls are ready, we assemble the cabinet frame. In the lower part we install metal shelves for shoes, and in the upper part for hats (they can be purchased ready-made). It is desirable that these be lattice structures that are not an obstacle to the penetration of warm air. In the top shelf, you will need to drill a hole for the hood with a diameter of about 100 mm.
- The back wall of the cabinet can be made of thick plywood. After installing it, you should fix the clothes rail and install the ventilation pipe with access to the exhaust grille.
- When the design of the internal filling is completed, it remains to drill through holes at the bottom for air intake from the hallway and install the facades.
The next step will be the independent production of an infrared heater from a heating film used for installing underfloor heating. For this you will need the following materials: 
- a piece of heating film of the right size;
- power cord with plug and switch (for ease of use);
- eyelets and terminals a ring for connecting a wire to a heating film in the amount of 2 pcs.;
- wide electrical tape and super tape for finishing the dryer.
On the copper current-carrying strip of the film, you need to punch a hole for the grommet. For this, a regular stationery hole punch is suitable. Then you should connect the wire to the ring terminal and crimp it with a special tool or ordinary pliers. After making an incision along the copper strip, you need to insert the ring terminal and secure the grommet with a press or pliers. You can install the eyelets in any metal repair shop.
Similar actions should be performed on the copper strip on the other side. After that, it remains only to insulate the places where the wire is connected to the heating film and the ends of the copper strip on the opposite side. For aesthetic beauty, insulation spots can be sealed with super tape. 
After the manufacture of two infrared heaters, we proceed to the last stage of creating a drying cabinet - we fix the heating elements in its lower and upper parts. By the way, if you wish, you can purchase ready-made infrared cassettes for these purposes.
We assemble a device for drying shoes - an electric dryer from a self-regulating thermal cable. An electric shoe dryer can make the autumn-winter slushy period much more comfortable. In addition, dry shoes are a matter of maintaining health, so this is far from a useless device.
Materials and tools
Materials:
Cuttings of a thermal cable (it is possible from the "warm floor" system);
Copper two-core cable with a cross section of 1.5 sq. mm;
Electrical plug;
Dimmer (it is possible without it if you do not need to regulate the heating of the dryers);
Insulating tape;
Terminal block.
Instruments:
pliers;
Screwdriver;
Knife and side cutters.
Dryer manufacturing
So, from scraps of a thermal cable with a length of 35-50 cm, we make two pieces of insert loops.
On two sections of the cable, we make an end seal on one side (see photo) and connect the terminal block on the other side. You can make not a terminal connection of wires, but soldering.
We connect two "loops" with a cable with a plug in parallel. Additionally, we isolate with several layers of electrical tape or upset with a thermo-tube.
We do everything carefully and reliably, because we will connect the dryer to the 220 volt network - there should be no mistakes!
Demonstration of heating a homemade shoe dryer with an infrared non-contact thermometer.
During the off-season, many of us are faced with the problem of constantly getting wet shoes, because knee-deep puddles and slush for our latitudes are quite common. Often, even the highest quality shoes can not withstand this kind of stress and eventually begin to leak moisture in certain places. Therefore, when we come home in wet shoes, we think about how to dry them quickly, because no one wants to put cold wet shoes on their feet again in the morning. Solving this problem is not difficult - you can buy a special device in the store or learn how to make a shoe dryer with your own hands without spending a lot of time and money on it. In this article, we will take a closer look at how to bring such an idea to life. You will find several workshops on making shoe dryers at home. Let's get started.
Is it worth it to focus so much on the problem?
- Wet shoes are a source of development of the fungus, which is then very difficult to get rid of.
- In addition, if you wear wet sneakers or shoes, then a runny nose or cold will inevitably overcome a person.
Important! The easiest way is to try to dry the shoes on the radiator using a wooden or plastic grate, on top of which damp shoes or boots are placed. In this case, the hot radiator will not come into contact with the sole material, which means it will not harm it. The natural circulation of heated air allows you to dry your shoes in just a few hours.
How to make a shoe dryer on a battery with your own hands?
This is the safest, most effective and inexpensive way to deal with wet feet. A do-it-yourself shoe dryer for a battery is made quickly enough. We will make it from the remnants of the laminate, and such a design will have a large number of advantages:
- It will be possible to attach it to the battery itself on the side.
- You can simultaneously install several of these home-made dryers on one radiator.
- It will be easy to understand, for example, in the summer you can hide it so that it does not take up extra space.
Work materials
For work you will need the following materials and tools:
- Remains of unused laminate 8 mm thick.
- Pencil and ruler.
- Electric jigsaw.
- File and sandpaper.
- Electric drill with a drill with a diameter of 8 mm.
- Paint or varnish, brush.
Construction device
Such a dryer will consist of the following elements:
- Two rack holders.
- Internal strike plate.
- External strike plate.
- Focus screen.
- Two wedges.
Important! To simplify assembly, we will supplement the design with an auxiliary bar. By the way, since the rack-holder is the most important element in such a design and has a difficult configuration, the dimensions indicated in the drawing must be strictly observed.
We will assemble the dryer without the use of glue.
And now we will learn how to make a shoe dryer, which will be attached to the battery:
- At the first stage, we need to make special holes for cross-shaped joints (linings in the wood floor). Making them is very simple: you first need to mark the sample in the right place, then drill a hole in the middle with a diameter of 8 mm, according to the thickness of the laminate. Next - cut the sample with a jigsaw along the inside.
- Since cuts under the influence of moisture can swell and destroy the structure, each cut must be varnished or painted over.
- Now we connect the racks with the auxiliary bar. Holding the bar with one hand, you need to push the lower parts of the racks into the first and fourth opening between the radiator sections. And the second - by hand, we install the internal striker plate, threading it through the central section.
- Then you need to slightly tighten the auxiliary bar, install the outer striker plate already on top.
- While the dryer is in free movement, it is necessary to determine a specific place for it, then install the wedges.
- Next, you can remove the auxiliary bar, insert the screen-emphasis.
- As a result, you will get a space between the battery and the screen, where, in fact, shoes will be inserted with toes down.
Making an unusual universal shoe dryer with your own hands
In this section, we will learn how to make a do-it-yourself shoe dryer from the most ordinary computer fan.
materials
You need to prepare the following items for work:
- Unnecessary working fan (cooler).
- Meter corrugated tube.
- 12 volt power supply.
- Electrical wires for extension and connection.
- Electrical box.
- Screws.
- Electric plug.
Master class on doing the work
The assembly of our dryer is as follows:
- Cut a round hole in the box to fit the cooler.
- Divide the corrugation into two equal parts, make cuts in the box for them.
- Insert the cooler, secure with self-tapping screws so that air enters the attached hoses.
- Seal all cracks and gaps with rubber gaskets, which will ensure the correct direction of the air flow. Here is the dryer.
- Now insert both ends of the corrugations into the boots, plug the device into the outlet to test it.
Spring and autumn are the seasons when shoes get wet most of the time due to frequent rains. Shoes that are not dried can be harmful to your health by freezing your feet. And the shoes themselves will not last long. Whatever happens, I will show you how to make a very simple device that will allow you to avoid these problems.
The shoe dryer consists of only three components. It is not that simple, but rather the simplest. Well, I personally have not seen it easier. Despite its simplicity, it has a number of significant advantages:
- - Low power consumption.
- - Small size. You can easily take it with you anywhere.
- - As a power supply, you can try batteries or accumulators. And as a result, you can dry your shoes anywhere, say, on a hike, on summer fishing, etc.
What do you need for a shoe dryer?
- - Power supply 12 V (5 V).
- - Two coolers (fans) 12 V from the computer.
Dryer assembly
We take two fans and connect them in parallel to the power supply. Insulate with electrical tape or heat shrink tubing. And your shoe dryer is ready. We put the fans on top of the shoes, or if we insert them into the shoes. And turn on the block in the network.
If the drying speed is not so important for you, then you can take a 5 volt power supply (phone charger). This will increase the drying time of the shoes, but will reduce the noise of the fans. Of course, it is not big, but still someone may not like it.
I would like to add that at least 10 fans can be connected to one power supply and 5 pairs of shoes can be dried. Enough for the whole family. And if suddenly you are all wet, and there is only one dryer, it will take only a couple of minutes to make a few more dryers, unless of course you have all the elements at hand.
Often even the highest quality footwear cannot withstand the slush of the winter thaw and gets wet. In order to dry it properly and without harm, I assembled a convenient design based on two fans from a PC.
On a note
The most natural drying process is the evaporation of moisture at room temperature, and this is a long time. But if you create forced air movement (blowing, ventilation), drying will speed up several times.
From a piece of plywood 4 mm thick, according to the drawing (see fig.), I cut out a rectangular base. With an electric jigsaw, I sawed two holes in it according to the diameter of the fans.
Above each opening, I fixed with bolts coolers measuring 80x80x25 mm for a voltage of 12 V.
I connected the latter in parallel and connected a 12 V power supply to them. To dry, I put the structure on top of the shoes and plug the unit into the network. Fans provide a diffuse air flow, so the outside of the shoe is also blown.
A conventional heated dryer inside a wet boot creates a warm and humid atmosphere, and since there is little to no air ventilation, the shoes begin to rot and rot.