In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared ...

By Masterweb

30.05.2017 20:57

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is a great solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; gypsum; any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white paper, which will then be decorated; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments that will be appropriate should also be kept on hand.

Properly organized space will help make sure that the DIY phone stand will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone.
Sequencing:

First you need to figure out what shape the stand will be. After that, you need to draw templates of the required sizes on the sheet. Elements for the product are cut out from them. Then, carefully, according to the diagram that was previously drawn or printed from some site, we glue the necessary details. wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used. After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

special equipment; skills; the ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

wood from which the structure will be built; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); a simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product. Then you need to put marks on a wooden base, according to which the connector will be cut out in the future. The next step is to cut out the shape with the available tool. To do this, you need to glue the prepared spare parts. The next step is to make the product smooth. This can be done with a file or a special mains-operated device. When the surface is smooth, you can paint the finished shape with some color. After staining, you must wait for the product to dry. The work is completed by gluing the accessories selected for this mission. open with varnish, which will give shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has an unusual look can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

A mobile phone is a thing that should always be at hand. In the age of information technology, this is hard to argue with. Sitting behind the wheel, cooking in the kitchen, doing needlework or doing other things when your hands are not free, a homemade and original phone stand will become a necessary accessory.

It is simply impossible to imagine a modern person without a smartphone or telephone.

By material

In order to know how to make a comfortable phone stand, let's find out what material is used to make it.

Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way.

• Metal. The metal accessory will be durable and will last a long time. The cost of such a thing will be higher in comparison with the rest, made from more budgetary material.
• Wood. Popular and affordable material. Bamboo, ash is a common type of wood that is used to make holders.
• Ceramics. These holders look elegant, but, unfortunately, are very fragile. Masters working with this material make coasters in the form of animals, shoes, hearts, geometric shapes.
• Textile. A more childish option, when the phone is located on a small, specially sewn pillow or soft toy. This type of phone stand can be made by hand.
• Plastic. A versatile material that allows you to choose the color and shape.
• Paper. With your own hands from paper, you can very simply build a stand for the phone. This is a practical, lightweight option when no other alternative is available.

Modern smartphones have learned to do many different things, successfully replacing our clock, voice recorder, navigator, player and even a mobile cinema.

By style

Note! When choosing a stand style, take into account not only your individual preferences, but also the design features of the room in which it will stand.

Before ordering or creating a DIY phone stand, decide on a style.

• Vintage. A variant made in the form of an old thing made of wood, metal, leather or ceramics, with a design for fixing the gadget.
• Minimalism. Plastic and paper are the main materials of this style. An excellent choice for those who are not interested in extra details.
• Classic. Option for conservatives. Mostly the manufacture of holders in this style of wood, metal.
• High tech. Modern style, without additional decorative elements. The material used is plastic.

A stand is a useful and convenient thing in everyday life.

By appointment

On the table.

The main thing is the strength of the structure.

1. Adhesive based. Products in the form of a circle, one side is glued to the phone, imitating a support, which makes it possible to put the phone at an angle of 45 degrees.
2. On a stand. Fixes a device of any size. It consists of a bottom plate, which is installed on the table and a clamp, in which the gadget is placed.

Universal.

If you are a creative person, then you will find the makings of a phone stand in any item.

1. There is an option when the bottom side of the holder has a mount that can be attached to a table or any other surface. The base of such a device is usually flexible and rotates 360 degrees.
2. The second popular option: in the form of a flexible tripod that can take absolutely any shape. This type can be used: on a walk, in bed, while washing dishes, in a car - absolutely in any convenient place.

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home.

In auto.

It is very convenient to purchase a magnetic holder for the car.

Installation principle: one side is attached to the device with a magnet, and the other to any accessible place in the car.

Phone stand made of unusual and improvised materials

Stationery binders

The device is strong enough and able to hold the phone.

If suddenly in the office it was necessary to fix the phone in an upright position: here's how to quickly make a phone stand from improvised materials with your own hands. The binder consists of two parts, a colored clip made of plastic or metal and a steel-colored paper clip. We take two binders and fasten them together. We put forward one paper clip in the direction of the phone.

Using pencils

Try making a phone stand out of pencils.

Materials needed: 6 pencils and 4 rubber bands. We assemble a three-dimensional triangle: a tetrahedron. We fasten the ends of two pencils together and put the third one between them.

Important! To build a design, you need to take pencils with rubber bands at the ends to avoid unnecessary slipping.

bottle models

To make a model from bottles, prepare the material: any bottle from a cleaning agent, dishwashing liquid or shampoo, scissors.

Bottom line: the work should resemble a pocket.

Important! The size of the bottle should be at least twice the length of the phone.

Cut off the neck of the bottle and the front wall to the middle. This stand will be relevant for use while recharging. To do this, make a hole for the charger in the upper back of the container. Fold the phone inward, and insert the charge first into the hole, then into the socket.

Such a model can be painted, decorated with paper or cloth.

paper clips

The variant with a paper clip will require minimal costs and time.

The paper clip must be straightened into a straight line. We bend both edges of the paper clip upwards, retreating by 1 cm. Then we retreat by 4 cm from both sides, this part of the structure should fit snugly against the table, like a support. The next step is to bend the paperclip in the middle up so that the previous bent parts remain even, perpendicular to the table.

From a credit card

Set the resulting zigzag on the table, the work is ready.

Place an old, unnecessary credit card in front of you in an upright position. Step back from the edge 1 cm and bend the edge towards you. Divide the rest in half, bend, but in the opposite direction.

From Lego constructor

Take a wide plate - the basis of the children's designer.

It is necessary to fix several bricks from the designer on the plate, in order to support the back panel of the phone, the angle at which it will be fixed will depend on the height of the wall. To fix the device on the sides, take a few more identical bricks and fix them on the base.

From a cassette case

We insert a mobile device into the pocket where the cassette was once stored.

If you have an old cassette cassette left at home, it is very easy to create a holding structure: open it as far back as possible so that the part with the cassette pocket remains in front, and the cassette cassette top cover is placed on the table.

DIY phone stand made of paper and cardboard

Attention! Before you make an origami paper phone stand with your own hands, find and prepare the patterns you like.

You can make a small phone stand with your own hands from the simplest materials.

• Folding cardboard stand. You can make a phone stand out of thick cardboard. Take a sheet of cardboard and cut out a figure: 10 by 20 cm. Fold it in half. Step back from the fold 2 cm and at an angle of 45 degrees cut the cardboard with scissors, not reaching the edge of 2.5 cm. Then change the angle at which you cut, it should be perpendicular to the bottom edge, in this position cut another 1.5 cm, lower the corner of the scissors 45 degrees and cut 1.5 cm down and then again perpendicular to the bottom edge, to the end.

Homemade cardboard smartphone stand.

• Cardboard triangle. Before you make a simple cardboard phone stand, prepare the materials: a strip of cardboard, pushpins, glue or tape. Take a strip of cardboard and fold it into a triangle. Fix the edges with glue, tape or buttons.

In 5 seconds, you can make a solid and strong stand for your phone.

• From a bushing. An excellent do-it-yourself phone stand made of cardboard will come out from the remaining paper towel sleeve. The wide sleeve must be cut in half. In the resulting part, cut a horizontal hole where the phone will fit. From the buttons you need to make legs so that the stand can be placed on the table.

Here's how to quickly and easily make a functional do-it-yourself phone stand out of cardboard.

• Origami. A good paper phone stand will come out of a regular A4 sheet. There are several schemes by which you can fold an excellent support for the device. Knowing how to make a paper phone stand, you can always fold it in a few minutes and enjoy it.

Origami paper phone stand.

DIY phone stand made of wood

We take a wooden beam and make a blank out of it, aligning and processing the edges. Attach the gadget and cut it to size. Corners must be rounded and sanded. Having made the markup for the grooves, cut them out. Take a chisel and carefully clean the cut grooves. Sand the work again before oiling.

Homemade and original stand is ready.

DIY phone stand made of wire

Using ordinary wire, by twisting in a variety of ways according to the schemes, you can create an original holder for a mobile phone. The main thing is that the weight of the device is evenly distributed on the homemade holder.

The advantage of this DIY phone stand is that you can place your phone on it both horizontally and vertically.

Everyone knows why and when you need a phone stand, knowing the quick ways to create it from improvised means, you can always comfortably watch a movie or do household chores and chat with friends via video link.

Also, this stand can be used as a holder for tablets and e-books.

VIDEO: How to make a phone stand.

50 variants of original phone stands:

Proposed for construction, the car phone stand will be extremely useful for drivers who often use the phone. It will solve problems with finding a phone during a trip. Thanks to a simple and reliable design, the work will not take much time.

Step 1. Tools.

To create a rack you will need:
1. Aluminum tube with a diameter of 47 mm "f. 4";
2. Connecting tubes at 45° and 90° (aluminum or copper). They are cheap and available at any hardware store.

3. Solid wooden sticks (you can take ice cream sticks);
4. Epoxy glue or any other glue with similar qualities;
5. Case or phone case;
6. Cable ties (they will be needed to attach the cover);
7. Hacksaw;
8. Ruler;
9. Knife.

Step 2. Frame assembly.
Before starting work, you should decide on the installation location of the telephone rack. It should not interfere with the use of the audio system, recharging and other daily activities in the car. Only after that you can start measuring.

The aluminum tube must be cut into 3 pieces. The shortest part is attached to the 45° angle tube. The horizontal part (about 5 cm) connects the angled tubes of 90° and 45° "f.2.1 - 2.2". A vertical pipe (approximately 10-13 cm) will hold the rack itself. All pipe connections must be lubricated with glue so that nothing falls off during movement.

Step 3 Attaching the case.
On the reverse side of the cover, we make 3 pairs of cuts (the depth of the cut should correspond to the tips of the ties). The cuts are parallel to the tube, which will subsequently be attached to the sheath. We thread the screeds into the holes and tighten a little (the main thing is not to overdo it). We tighten the long tube of the frame with ties as shown in the photo. Cut off the ends if they are too long.

Next, you need to cut the wooden sticks in half, insert between the case and the aluminum tube and grease with glue.

With a phone holder, you will not spend a lot of time looking for a mobile device. It will also be well protected. It is less likely that someone will drop it, step on it or spill tea, and most importantly, while driving a car, you will not be distracted. For aesthetic reasons, it can be an excellent decor for the interior of a car.

The simplest holder is a handlebar design with silicone loops. The adjustable bracket on the panel, into which the gadget is inserted, is characterized by the fact that it is compact and the phone is easy to install. Another very simple holder is a ball on a magnet.

Designer coasters are made of various materials, have different shapes - it all depends on the creativity of the master. For example, there is a lawn on a plastic stand, and a phone holder at the bottom.

The gadget holder can be made as an elegant wooden stand. For example, in the form of a tree with a hollow or improvised stumps. A neat wooden stand with randomly arranged slots where a mobile phone is inserted will look original.

A wooden stand can be very concise and resemble a photo frame where a smartphone is inserted. A wooden organizer on the panel can have not only a cell for a gadget, but also for pens and watches. A wooden stand in the form of a figurine supporting the phone looks original, only it needs to be well fixed.

Sometimes phone holders in the absence of a gadget are a nice souvenir. For example, a gadget stand in the form of a rotary phone looks original, showing the connection of times. Or look unexpectedly creative when the holder is an alarm clock into which a mobile phone is inserted.

Conceptually, the holder looks like a marble figurine holding a gadget in its hands. Even in winter, a shell stand will evoke memories of the sea. The stand can look like your favorite food, like sushi, a hamburger, or a caviar sandwich. In such souvenirs, the craziest fantasy can turn into reality.

The highlight of the holder in the style of minimalism will be the original mount. For example, on the principle of a table lamp attached to a clothespin to the table. Even an ordinary stationery binder will look original in the form of a phone holder.

It is worth looking at things with different eyes and arrange a cozy soft pillow or chair for the phone. If a woman is driving, it can be a fluffy basket, an original fabric pocket, a soft envelope on a pretty hinged loop. Knitted animals in the form of a coaster will always help to keep a good mood. Stylish bright accessories will not only serve you by performing certain functions, but will also help you think positively.

The holders can have a flexible cord for fastening, a suction cup, an adjustable bracket.

In choosing a stand for the phone, everyone is guided by their taste preferences. In terms of functionality, the holder must have a good fit so that the phone is secure.

How to DIY

From paper clip

A device that supports the phone can be made by hand. Such a stand will definitely be exclusive.

Homemade holders can be of three types:

• spoiling the salon;
• not distinguished by strength;
• representing a whole work of art that requires real skill.

We take the binder, remove the staples, bend them so that a holder is formed, wrap them with a thread and put them in their original place, securing them with an ordinary rubber band. It remains to attach a simple device to the duct. The phone is secure. The only negative is that the phone cannot be quickly removed from the holder.

From wire

In order to fix the phone on the wire holder, you will have to sacrifice the integrity of the front panel of the cabin, since holes will need to be drilled on it. The holder is made of strong wire, bending it in an appropriate way and inserting it into the holes. The phone must be firmly attached to the holder.

Aluminum column

It will take a little effort to make a stand out of aluminum. In any hardware store, you can inexpensively purchase connecting tubes with angles of 45 and 90 degrees, as well as an aluminum pipe with a diameter of 47 mm. You will need more ice cream sticks, an old phone case.

You can start creating the holder after the place where it will be located is determined. Now the necessary measurements are made. The pipe is cut into three parts. The short part is attached to a 45 degree angled tube. The horizontal part is held in 45 and 90 degree angle tubes. The longest part - a vertical pipe, 10 - 13 cm long, will hold the rack.

For greater strength, all fasteners are first lubricated with glue. A couple of cuts should be made in the case into which the ties are inserted. The cuts are on the tube. A long pipe is pulled together with ties. Wooden sticks are glued between the aluminum pipe and the case. The final step is to attach the connecting tube to the car.

It will not be difficult for a home craftsman who has a minimum of tools and a maximum of diligence to make just such a wooden phone stand. As a material, a board 10 mm thick, plywood, is suitable. You can also use thinner plastic. Approximate dimensions are shown in the figure. The stand is 10 centimeters high, 8 cm wide (6 cm clean). Installed on two semicircles with a radius of 4 centimeters. Of course, before you get down to business, measure the widest of the phones that will stand in it. A stand is assembled for PVC glue, then decorated at your discretion. For example, in the figure above, the edging is processed by burning.

Well, here I think it’s hardly necessary to explain anything, especially to us - people who are not young. Yes, of course, many have learned, the good old "cassette" from a tape cassette.

Just remove the cassette, turn the cassette holder over, open it to the other side and you get a stand at an angle of about 75 degrees. The width of the "pocket" is about 12 millimeters, the current thin smartphone fits perfectly there.

Here is such a "brutal" stand for the phone from an ordinary aluminum plug. The two extreme teeth are bent at the very base at an angle of 90 degrees. The two middle tendrils are bent at a distance of 15 millimeters from the base, also at an angle of 90 degrees. Your gadget is inserted between them. The fork handle plays the role of a support.

This coaster requires six clothespins and one pencil. The pencil is preferably hexagonal, on a round clothespins will slide. I think it’s clear from the photo - four clothespins are legs, two on top actually hold the gadget, a phone is inserted between their petals. The width adjustment is very large - the length of the pencil. By the way, even if a couple of clothespins are hooked to the edge of any vertical surface (let's say the wall of the box), they will successfully cope without four other clothespins and a pencil!

This stand is very simple, but also suitable for small phones. This is an ordinary old bank or discount plastic card. It should be divided across into three equal parts with a pencil and bent along the lines. But I would make the lower "heel" on which the phone will stand only a centimeter, and divide the remaining distance into the "shoulder" of the prop and support itself.