What are Isotex panels and where are they used? Finishing wall panels isotex (isotex) Paper-coated wall panels

Installation of Isotex wall panels is quick, simple and does not require any complicated tools. For self-assembly of panels you will need:
- Ruler with a square (as a guide for cutting panels);
- Roulette;
- Pencil;
- Construction (carpet) knife;
- Glue type "liquid nails" with a gun;
- Stapler (staples 10-14 mm).

Preliminary cutting and drilling of holes for communications should be carried out with FACIAL side of the panel.

Installation of Isotex wall panels
Installation on a wooden crate:
For the crate, wooden slats measuring 20x50 mm are used. The rails are installed in increments of 290 mm from the axis of each rail. Apply glue in dots to the back of the panel along the central axis approximately every 200mm. Glue the panel to the center rail. Nail the sides of the panel to the rails with a stapler. Make sure that the distance between the brackets is no more than 100 mm.

Installation on a smooth surface:
Isotex panels can be glued to walls without pre-treatment if the material is sufficiently smooth (e.g.

In country cottages and dachas, humidity indicators usually “jump” according to the seasonality of the owners’ habitation. Therefore, the transformation of walls from the inside requires the acquisition of "breathing" building materials. And so that they do not deform from temperature changes. Izotex wall panels, in addition to the above problems, also help to cope with cracks that occur on the walls during shrinkage.

They are no less widely used and in great demand in urban areas. The excellent acoustic qualities of isotex muffle loud sounds from neighboring apartments, providing good sound absorption.

Among all materials for wall cladding, the isotex panel stands apart. This wood-fiber and environmentally friendly material is used in the decoration of rooms in any home. It differs from competitors in its versatility of use. It is used in a dwelling built from any material without preliminary preparation of the walls. If there are no serious defects, then there is no need to trim or putty something. No need to peel off old paint or wallpaper. Isotex frees you from a lot of typical repair problems and hassles. All work is remarkably quiet and dust-free.

This material is also different in that it does not require the mandatory involvement of professional repairmen. You can buy isotex wall panels in Moscow and handle the installation on your own.

About the composition and properties

Isotex is soft fiberboard coated with textile or vinyl. Therefore, it is endowed with all the characteristic advantages: heat and sound insulation, environmental friendliness, as well as typical wood properties, durable, resilient, warm. Pleasant in appearance, the cladding will also provide a comfortable stay:
  • the walls are always warm, lean against them and you will not feel the usual “brick” cold;
  • noise from the room is extinguished, external sounds do not irritate;
  • like most modern wallpapers in the future, you can wash, paint, and, if necessary, simply replace a damaged isotex panel (therefore, it is recommended to purchase this product with some margin).

Physical Properties

If you buy isotex wall panels in Moscow, then you can realize any design idea. A large selection of isotex plates, the price of which is quite affordable, opens up wide opportunities for this. If desired, you can perfectly decorate your home with a variety of colors and textures.

When decorating interiors, you always want to combine an aesthetic appearance with good heat and sound-proof properties of a finishing material. These qualities are combined with isotex wall panels. They are based on the ISOPLAAT heat and sound insulating board, which consists of 100% natural materials.

These panels can decorate any room

Comfortable wall panels

The use of isotex panels helps to immediately solve several problems:

  • additional thermal insulation of the room;
  • good sound insulation;
  • the possibility of quick and easy repairs with their own hands;
  • aesthetic appearance of the interior;
  • environmentally friendly room.

Advantages

The popularity that isotex wall panels have is primarily due to their advantages:

  • the base of the panels is made of coniferous trees, and is a compressed fibrous mass;
  • the technological process does not use chemical glue and formaldehydes;
  • the porous structure allows the panels to "breathe";
  • the natural qualities of wood are preserved: strength and low thermal conductivity;
  • good sound insulation;
  • ease of installation, connection of tongue-and-groove panels do not require high qualifications and are available to non-specialists;
  • no preliminary preparation of walls is required and there are no dirty, water-related works.

Specifications

The dimensions that the isotex decorative panels have are as follows:

  • sheet thickness - 12 mm;
  • dimensions of one panel - 580 × 2700 mm;
  • quantity in one package - 4 pcs. ;
  • wall area covered by one package - 6.26 m 2.

The composition of the isotex panels:

  • fibreboard, soft and without chemical additives;
  • a layer of paper for alignment;
  • special gluing ingredient SITOL 5893;
  • decorating coating.

As a decorative coating, PVC wallpaper or industrial textiles can be used. Textile coating is made from various materials: viscose, linen, cotton, polyester, acrylic.

Installation of isotex panels

Internal finishing panels with isotex boards, installed on any quality surface in dry rooms. Differ in simple and fast installation.

Since the panels are a natural material and have "breathing" properties, it is necessary to equalize their humidity with the humidity of the room in which the work will be carried out. For this, the unpacked plates must be left indoors for a day.

Panels can be mounted on walls made of concrete or gypsum boards and wood. If they are even, then the panels can be fixed with glue and staples. If the walls are strongly curved, then a crate should be made. It will also help hide electrical wiring and other communications from prying eyes. Therefore, isotex decorative wall panels should be installed after all “wet” work has been completed and engineering communications have been laid out.

Mounting panels with glue

The glue is applied to the back wall of the panel in a strip, stepping back from the edge by 3 cm, and in the center - in drops with an interval of 20 cm. The panel is applied slightly to the side and shifted to the side until it is completely joined. If necessary, the fastening of the panels can be strengthened with special brackets.

It is important to choose the right glue

Installation of panels on the crate

For the device of the crate, a wooden picket fence 2 × 4.5 cm in cross section is used. The distance between the planks is 30 cm. Apply glue dots on the back side of the panel, opposite the planks and press it against the crate. Additional strengthening of fastening - building brackets.

Mounting on the crate allows you to pre-insulate the walls

Video on Isotex panels

Now we see that the use of these panels for interior decoration is a good solution. Moreover, reviews of isotex panels are always positive. And the cost of panels and labor costs can significantly reduce repair costs.

Every owner of the house wants to create a comfortable environment in it. Interior decoration should provide the room with an aesthetic appearance, solve sound insulation issues, and keep the house warm and dry. Isotex (Isotex) does an excellent job of decorating the ceiling and walls - wall panels for interior decoration, a universal heat and sound insulating material that is easy and convenient to install.

The source of raw materials for panels is softwood. During processing, it is crushed and diluted with water. Under a hot press, the Isoplaat slab is formed from the resulting mass, which is thoroughly dried. No chemicals or adhesives are used in the production. The binding function is performed by lingin, which is contained in wood, and the resin acts as an antiseptic. Thus, the Isotex panels are a high-tech product corresponding to the M1 class, recognized in the world as the safest and most environmentally friendly material for cladding. On the inside of the sheets is a leveling layer of paper. The outer side is coated with PVC or textile. A foil is placed between the plate and the decorative layer in order to provide the product with resistance to fire.

Types of decorative panels "Isotex"

Isotex panels are divided into 2 types depending on the purpose:

1. Isotex wall panels for wall cladding. Sold in a pack of 4. This amount is enough to cover an area of ​​6.26 sq. m. The thickness of one plate is 12 mm. The standard size is 58 × 270 cm. To fasten the products together, a thorn-groove system is used on the end side.

The lineup:

  • Decor - decorating layer imitates plaster;
  • Interior - have a linen texture;
  • Timber, Mali, atrium 65 - repeat the texture of wood;
  • Textile - the decorating layer consists of natural textiles.

2. Isotex ceiling panels for ceiling finishing. Sold in a pack of 8 pcs. One set can cover an area of ​​4.32 square meters. m. Dimensional characteristics: plate thickness - 12 mm, and the area of ​​\u200b\u200bone sheet - 30 × 80 cm. To fasten them together, a tenon-groove system is used on all sides.

The lineup:

  • Alaska - have a barely noticeable texture of white plaster;
  • Gold - the decorative layer imitates the texture of gold-colored wood;
  • Silver - with imitation of silver-colored wood;
  • Nordic - with imitation of natural wood.

Advantages of Isotex panels

Isotex decorative panels are very popular, as they have a lot of advantages in comparison with other materials for wall cladding in a living room:

  • high noise reduction, elimination of the echo effect, creation of good acoustics in the room (isolation is 23 dB);
  • high thermal insulation properties;
  • lightness and ease of care;
  • the possibility of reusable dyeing (except for textile coating);
  • the ability to partially replace Isotex if wall or ceiling panels are damaged;
  • the possibility of facing any walls: wooden, brick, aerated concrete;
  • installation does not require preliminary surface finishing: leveling, puttying, plastering, removing wallpaper and a layer of paint;
  • the ability to carry out installation without the involvement of specialists;
  • rich palette of colors and textures;
  • resistance to sudden temperature changes;
  • ecological comfort in the room.

Application of isotex

Isotex wall panels are universal for cladding office and residential premises both in urban areas and in the suburbs. Due to their noise reduction properties, they are suitable for tiling in bedrooms and children's rooms. "Breathable" material is not deformed by temperature changes. It can be used in rooms that are not heated in winter, for example, country houses. For those who love experiments, isotex makes it possible to paint surfaces with any color using latex paints.

Mounting methods

Installation is carried out in a dry room. The walls do not require careful alignment and removal of old material. Isotex decorative panels can be installed independently due to their light weight (5 kg - wall, 1.5 kg - ceiling). Fastening is carried out in two ways:

  1. on the crate;
  2. on glue.

The first option is used if the surfaces have irregularities, curvature, or you want to hide the wiring behind the panels. Using glue, it is desirable to mount isotex on even walls.

The material has a porous structure, well gives and absorbs moisture. It is recommended to unpack the products 24 hours prior to installation to ensure that their humidity matches the humidity level in the room.

Mounting on a crate

To create the crate, planks of wood measuring 2 × 4.5 cm in cross section are used, which are located on the surface of the walls at a distance of 30 cm from each other parallel to the floor. On the reverse side of the slab, spot glue is applied at the points of attachment to the planks, then the Isotex wall panels are tightly pressed against the crate and held for some time. Construction brackets are used in order to strengthen the fastening. They must be placed at a distance of 10 cm from each other.

Note! The outermost panel on the ceiling is fastened with nails and screws in such a way that they are hidden by a ceiling plinth or wall isotex. Ceiling panels should be positioned along the lines of the planks. It is desirable that the longitudinal seams coincide with the direction of the light falling from the window!

Glue mounting

The adhesive method of installation allows for the fastest possible installation. It is enough to apply glue strips on the reverse side of the board, leaving a gap of 3 cm from the edges, and in the center, dot it at a distance of 20 cm from each other. Isotex is pressed against the wall a few centimeters from the edge of the adjacent panel, then shifted to the side until it stops. This technique is necessary to level the surface of the adhesive. Staples are additionally used for secure fastening.

Where can not Izotex panels be used?

When installing isotex on the crate, the area of ​​\u200b\u200bthe room decreases, but this problem is easily solved by leveling the walls. Isotex ceiling and wall panels are not suitable for arranging rooms with a high level of humidity and where direct contact of the walls with water is implied. In such conditions, it is recommended to use waxed products that repel and do not absorb water.

Izotex panels are used for surface finishing only indoors and are not suitable for facade cladding!

Isotex textile coated

Isotex with textiles has a beautiful appearance and has a noble texture. Such wall sheets are warm to the touch and cause pleasant sensations. The material perfectly absorbs sound. In addition, the panels are easy to clean with a vacuum cleaner. They can be varnished with a water-based varnish to impart dust-repellent properties. The range is represented by a wide variety of colors and textures. For the decorating layer, both natural materials - cotton, linen, and synthetic ones - viscose, polyester, acrylic are used.

Isotex wall and ceiling panels are an invaluable material for creating a cozy atmosphere. High-quality natural composition provides long-term operation of surfaces, a comfortable indoor climate and improves living conditions due to excellent soundproofing properties. In addition, everyone can design the design of the room to their own taste, as the texture options and color palette of Isotex wall panels are not limited.

Fitting © 2022 Design and interior of apartments