Dirt-protective gratings and pallets. Polymer concrete shower trays aqua plastic door tray with metal edging

The door tray is a dirt protection element installed in the pit at the entrance to the room to remove moisture into the sewerage system and collect dirt residues from shoes. Dirt-collecting pallets are of two types - plastic and polymer concrete, but with the same properties in use. In both versions and...

The door tray is a dirt protection element installed in the pit at the entrance to the room to remove moisture into the sewerage system and collect dirt residues from shoes. Dirt-collecting pallets are of two types - plastic and polymer concrete, but with the same properties in use. Both versions have all the necessary options for easy installation. In order to make the right choice and buy a door pallet, it is enough to know the dimensions and, mainly, the depth of the structure, as well as assess the degree of intensity of use.

The plastic door pallet is made from frost-resistant polypropylene of increased impact resistance, which does not respond to temperature changes (GOST 26996-86). Dimensions 600x400 mm (60/40 cm) are standard and cannot be made according to individual conditions or drawings. But the height characteristic can be selected with maximum accuracy to typical arranged pits - plastic pallets 600x400 are made with an overall height of 65 and 100 mm.

The product can be supplemented with a galvanized steel edging to protect the upper part of the plastic rim from various kinds of mechanical influences. Inside the case there is a crate cast in the form, on which, for example, dirt-protective mats are subsequently laid. At the bottom of the pallet there is a stencil with a branch pipe for connecting a 110 mm pipe elbow.

Polymer concrete trays for dirt protection gratings are made from a mixture of polyester resins with the addition of quartz sand, marble and granite chips. The material, of course, surpasses plastic in its properties, but the price of polymer concrete pallets, unfortunately, makes us think about the need to use such protection against dirt at the entrance. Some manufacturers have abandoned the production of polymer concrete pallets with dimensions of 500x1000 mm in large numbers due to economic insolvency. Therefore, in order to avoid disappointment and unsuccessful searches in the future, it is still recommended to use the standard dimensions of the elements - 400x600 mm (40/60 cm), 100 mm high.

The presence of galvanizing on the sides allows you to strengthen the polymer concrete pallet around the entire perimeter. As with the plastic model, a standard stencil is marked in the bottom of the case for connecting the pallet to the sewer line. But in order to lay a dirt-protective mat or an aluminum grate in it, an additional rigid gasket in the form of a support mesh will be required, since any crate is not provided in the pallet body.

As a rule, the door tray is just a part of the combination in organizing the dirt protection of the entrance group. Plastic or polymer concrete, high or wide, it can be functionally interesting only in combination with cleaning accessories - a grill or a special dirt-protective mat.
www.site

Antisplash mat - and other types of structures, are installed at the entrance of buildings with high traffic. The main task that mud protection systems are designed to solve is to clean dust, dirt, sand and excess water from the soles of passers-by. However, the apparent simplicity hides the second problem that such devices solve - they significantly reduce the wear of floor coverings. Indeed, dust, sand - all this is an excellent abrasive that will quickly disable or at least disfigure any floor covering. In addition, the dirt lying in stains on the floors is at least not aesthetically pleasing.

Dirt-protective coatings are divided into different "zones" of action. So, the first zone is the building in front of the entrance. Dirt-shielding gratings that are installed above a specially equipped pit show themselves in the best way. Such gratings clean off the lion's share of all coarse-grained debris, in addition, partially remove excess water.

Since at this stage, the metal will often experience increased mechanical loads, as well as the influence of aggressive anti-icing agents, resistance to these factors is important, therefore, the dirt-protective coating for the entrance is made of galvanized steel.

The second zone is the vestibule. At this stage, dust and sand of medium size are removed from the sole. Special coatings are excellent for this - an aluminum profile with a pile fixed in it or rubber scrapers. Between themselves, the profile is fastened with a thin steel galvanized cable up to three millimeters thick. Such structures are also installed in a special pit of small depth, or on a flat floor and fixed with a special plinth. Such designs are called - modular dirt-protective coatings.

The third zone is the hall. As a rule, by this time the sole of the shoe is almost clean. It remains only to get wet with excess moisture and clean off the remaining fine dust, so here they use various rugs on a woven basis or a profile with a fine pile.

The main requirements for dirt protection flooring:

    wear resistance;

    Mechanical strength;

    Resistance to aggressive environments;

    Resistance to the effects of natural factors;

    Hygiene - resistance to decay processes;

So that the purchased mud protection system does not become a reason for frustration, you need to buy mud protection grilles from trusted sellers.

Our company carries out not only the sale of such systems, but also the selection of equipment, depending on the operating conditions. In addition, we provide consulting services on all issues related to water disposal.

The geography of our company is not limited exclusively to Moscow and the region. We deliver throughout Russia from Vladivostok to Kaliningrad and from Arkhangelsk to Sochi. Call!

The door tray is part of a dirt protection system that is installed at the entrance to the building. The pallet is a rectangular container that is mounted in the recess of the porch and can optionally be connected to a storm sewer.

Complete with a plastic pallet, a removable door grille is required. The key purpose of such an installation is the integrated dirt protection of the premises during the influx of visitors from the street. Such an installation can easily cope even with an intense flow through, which makes it indispensable not only for private houses, but also for public places.

The combination of a door tray and a grid solves several problems at once:

  • collection of street garbage, dust and dirt;
  • removal of melted snow and rainwater;
  • cleaning shoes in bad weather;
  • maintaining the cleanliness of the entrance group.

Buy door drainage pan in Moscow

The organization of a mud protection system before entering the building is most conveniently carried out in two cases: at the initial stage of construction and during a major overhaul. Separately, the advantages of a pallet combined with storm sewers should be emphasized. This design perfectly copes with the removal of a large amount of dirt and maintains a presentable appearance of the entrance.

The specialized company "MSK-Leader" (Moscow) is engaged in the implementation of reliable mud protection installations manufactured by leading manufacturers of surface drainage systems.