How to clean a dishwasher filter. Cleaning the dishwasher inside by yourself. What tools can be used to thoroughly clean the dishwasher

Like any other appliance, the dishwasher is in dire need of careful maintenance. Its performance directly depends on the regularity of cleaning the internal parts. Every conscientious owner is not averse to taking care of an assistant, but often does not know how to properly clean the dishwasher. This procedure does not require special help from the masters, it can be carried out independently.

Operating rules

What you should take into account and be guided by the following tips every day:

• before loading dishes, remove food debris and other debris from its surface;
• you can’t clog the dishwasher too much, it’s worth distributing the entire volume of dirty dishes over several starts;
• use specially designed ;
• dry the rubber seal on the door at least once every 2 months.

• plastic;
• wooden;
• with chips and cracks;
• aluminum;
• steel, copper, tin (without rust coating);
• porcelain, faience, also antique.

Crystal and silver dishes are washed with care, including a gentle cycle.

To prevent contamination, an idle run with vinegar is started. About a liter of liquid is poured into the compartment. At the end of the cycle, the door is left open to weather the pungent odor.

What steps are taken to wash the dishwasher?

The very first thing to do is to disconnect the device from the network, waiting for the end of the cycle. Then empty the cupboard from the dishes and collect all the water inside the machine with a dry cloth. Experienced owners of the "dishwasher" regularly perform the following cleaning procedures:

• filter;
• gratings;
• blades;
• seals;
• baskets for dishes;
• "dead zone";
• means after cleaning;
• outer area.

Do not be afraid of such a large list. It is advisable not to skip any of the above steps. Procedures will help get rid of the smell of dampness and prevent many malfunctions in operation. Such care is recommended once every 1-2 weeks or more often. The frequency of cleaning depends on the workload of the machine. If washing dishes is done daily 1 time per day, then maintenance is best done weekly.

Filters and grill

Cleaning a dishwasher starts with a strainer. Unpleasant stench is a signal of its contamination. When this element is clogged with fat, food debris, the unit works worse. He does not wash the dishes, makes more noise, after the end of the cycle, water remains inside. In this case, the filter must be cleaned immediately. Remove it and clean it most often, about once a week.

Advice: Worried owners can capture the moment of picking up details on the phone or photo so that the collection "in places" is completed successfully.

In modern models from manufacturers Bosh, Eletrolux, Siemens, Hansa, Hotpoint-Ariston, the mesh filter is easy to remove - with a simple manipulation of the hand. In older assemblies, they are fixed with nuts or self-tapping screws; you cannot do without the use of a special tool.

It is located inside the device, at the bottom next to the grid (water flows into it). Above it is a water distributor and a heating element. Together they remove the mesh, wash it by analogy with a filter. Cleaning is carried out in the following ways:

• using detergent, using an unnecessary toothbrush or metal brush. After rinsing with running water (suitable for minor contamination);
• make a mushy mass from a mixture of water and soda and apply to the surface with a sponge or rag, salt is sometimes added to the resulting product, which also cleans greasy contaminants;
• dip in a solution with citric acid for several hours, then rinse in a basin with soapy water, the main component can be safely replaced with vinegar (both components do an excellent job with accumulated fat and limescale).

The washed part is left to dry. At this time, the remaining components of the machine are washed, if this is planned. When there is no time to clean other elements, it is worth walking with a damp cloth on the inside and outside of the device, then insert the dried filter into place. It is important not to forget to clean the dishwasher more thoroughly next time, without putting it off indefinitely.

There is another filter that is worth washing. It does not require frequent intervention. This is a filter in the water inlet valve. Water pipes do not shine from cleanliness. Therefore, the quality of running water leaves much to be desired. You can see rust, salt and lime in it. Cleaning such a filter is done with a small brush or toothpick. It is impossible not to follow this element, otherwise the pressure of the supplied water will begin to decrease.

Blades and seals

Checking the blades will let you know if cleaning is needed or not. Wash them only when dirty. If any are found, it is necessary to remove the impeller and rocker arms in turn. Use normal dishwashing detergent for cleaning. Small holes with a toothpick or other suitable thin object.

Important: If any food remains are found in the cavity, they must be removed with tweezers. Under no circumstances should you take them inside.

The seal is located on the dishwasher door. This is a place that is often clogged with dirt, but as a rule, it is not conspicuous. Unpleasant odors come out of here. It is recommended to process sealants 2-3 times a year.

Cleaning Methods:

• walk with a sponge or cloth around the entire perimeter of the element, soaking it with dishwashing gel;
• special tool for processing rubber seals;
• prepare a more caustic composition - a mixture of water and soda, apply to the surface with an old toothbrush, rinse after 10 minutes.

Important: Try not to use citric acid to get rid of stubborn dirt, it harms rubber. Over time, it will become less elastic and will not protect the car from leaks.

Baskets and the "dead zone"

All baskets are removed and placed in a container where the product will be applied. To clean them, a regular gel is used, which is used to wash dishes. It is necessary to apply a sufficient amount with a damp sponge or brush to the entire surface, let it lie down for 20-30 minutes. This will help loosen the hardened fat. After waiting, rinse off with hot or warm water.

The "dead zone" is located at the bottom of the door, where it adjoins the cabinet. The liquid does not drain there, but all kinds of food residues roll there. To eliminate them, it is easier to use a small brush and any non-very caustic agent.

How to get rid of rust

Sometimes you can see how the paint on old baskets begins to peel off with scales. The process of metal corrosion is formed. Rust removal begins with the treatment of the camera and parts with a special tool. This composition will help prevent corrosion of metal products.

It is possible that the problem will not reappear. Rust will spread. A special sealant will help protect yourself, they update the paintwork. It is also important to check the presence of a filter on the water supply, it will retain rust coming from the pipeline.

Mold control

The formation and reproduction of mold is served by heat and excess moisture. The dishwasher will have to be cleaned of it, since there is nothing good from its appearance. This is harmful to the health of all households.

To eliminate trouble in the form of mold, a folk method is used - hydrogen peroxide and whiteness. The following steps are to be taken:

• apply a generous amount of peroxide to the affected areas with a rag, take an area larger than the size of the mold;
• let the car stand for about 2 hours;
• treat with whiteness (do not forget about gloves), soaking a rag in this product;
• wait another 2 hours;
• Rinse thoroughly with warm water.

If there was no peroxide in the first-aid kit, you can use whiteness. It is also applied to all fungal formations, then washed off with water. Then an idle cycle with dishwasher detergent is started. When you don’t feel like messing around for a long time, you can pour 1 glass of whiteness into the funds compartment and start the hot wash.

Important: The use of whiteness is not acceptable for PMM with stainless steel parts. The method is too aggressive for this material.

In a neglected situation, whiteness probably won't help. Then you can not do without the use of special tools. How to use them correctly is indicated on the package.

Advice: Regular ventilation will prevent the formation of scale.

Scale is an ally of any technique with heating

The presence of a heating element in the technique guarantees the formation of scale. A running dishwasher "squeezes out all its strength" with each new cycle. There is a load on many elements of the device, which threatens it with failure.

It is possible to clean any dishwasher from scale with a tool for such equipment. Get it in specialized stores. It is important to follow the instructions on the label exactly. The most popular among ready-made cleaners is Finish.

There are several popular methods for getting rid of scale:

1. Vinegar and soda. You will need 5% vinegar (take 1 tablespoon of 70% essence and dilute 13 tablespoons of water), as well as a quarter cup of soda. Mix everything in a glass and place on the top rack of the dishwasher. Start washer.
2. 9% vinegar. First, an idle launch of the PMM is performed with a special tool for it. 9% vinegar is obtained by combining 1 tbsp. 70% essence from 7 tbsp. water. Pour the resulting vinegar into the bottom of the dishwasher, pulling out the basket. Run a hot cycle. As the water temperature warms up, the wash is paused. You need to wait at least an hour, for the best result - 6-8 hours. After waiting for time, the wash continues to the end.
3. Bura. The tool can be purchased at a pharmacy. Open the door, wipe it and the bottom with a damp sponge or cloth. Dilute borax (sodium borate) with a little water and apply the mixture to the inside. Run the normal PMM program. After the cycle is completed, the insides are again wiped from the product with a rag. Next, you need to fill a quarter cup of borax, pour it into a container and start the PMM program again.
4. "Antinakipin". The gel is purchased at a hardware store. It is used in the process of washing dishes. Frequent use is not recommended as .

What products can be used to thoroughly clean the dishwasher?

Regular maintenance of the PMM will prevent many breakdowns. To do this, use special tools:

• "Finish";
• Fairy and Fairy Platinum, the first is a gel, the second is in the form of tablets with the addition of salt;
• "HG";
• Soda sun;
• Somat;
• Amway.

Let everyone decide how to clear their assistant. Complete the dishwasher cleaning procedures by wiping the inside and outside area. For this step, use a damp cloth. Remains of detergents are removed inside. Outside dust and stains.

Whatever gentle or rougher processing the owner of the PMM chooses, the main thing is to follow it. Timely care will extend its service life and save the owner from a headache in case of malfunctions. Let the PMM shine in every home.

The dishwasher is designed to wash dirty dishes, so some housewives or owners think that it does not need any cleaning itself. But such an opinion is deeply erroneous. The fact is that all the remnants of food that are washed off inside the chamber from plates and mugs - all this remains inside the machine. Your dishwasher is clogged. Food waste accumulates on the mesh, and if it is not removed in time, it begins to rot and exude an unpleasant odor. And soon the owners begin to think - where did they get such a heavy smell in the kitchen.

Bosch dishwasher inside.

How to wash a Bosch dishwasher from grease stains? You just need to roll up your sleeves, take your detergent, and wash your car. How to clean a dishwasher at home? Further in the article, we will analyze in detail how to clean the dishwasher from scale, which nodes you should first of all pay attention to, how often this should be done, and what means to use.

If you take this issue seriously, then all the answers about what and how can be found in the manufacturer's instruction manual. But there are two “BUTs”, firstly, our people very often do it first and then read it, and secondly, we have a lot of used cars, they are brought from abroad, they are in excellent working condition, but there are no documents for they, of course, are not included.

In order to less often have to clean the machine itself from food debris, you need to clean the dishes before placing them in the baskets. Naturally, after such an approach to business, the dishwasher will not get dirty at once.

But then again, people either get so tired that they don't clear their plates, or they just don't think about it until the car stops. If the car is made in Germany, then this will happen pretty quickly. For the machine to work well, so that your eye is pleased with the shine of the plates, you need to remove food residues from the dishes and wash the machine itself.

How often should this be done? It all depends on how you load it with work, on the frequency of its use, on the amount of dishes and on your efforts.

If we take average indicators: for example, you wash the dishes once a day, try to clean the dishes from food residues, then the operation to completely clean the machine from grease and clogs should be done at least once a week. If you decide that it's time to clean your car, then read carefully further in the article the steps to bring the car to a clean state. How to clean and how to wash a dishwasher - let's look at the example of a bosch dishwasher.

You will not have to do this work every day, so do not rush, do everything in good faith, the life of your car depends on your efforts. Follow the sequence of operations described below:

First of all, you need to de-energize the car, to do this, unplug the cable from the socket to which your machine is connected. Shut off the water, find the faucet, which should be somewhere near the machine and close it.

Prepare some container with hot water, it should be large enough to fit baskets in it, and add special detergents. Remove the dish baskets from the machine and lower them into the prepared container, they will need to be washed separately. If the baskets are heavily soiled, then they can be left in water for about 1 hour so that they are thoroughly soaked - they will then be easier to clean. If the baskets are relatively clean, simply wipe them down with a microfiber cloth and dish detergent or glass cleaner.

Further, it is already possible to take directly on the insides of the machine, let's start with the nozzles, since high temperature water is sprayed through them, then their holes over time, especially if the water is hard, become clogged with plaque. This plaque can be cleaned with a thin hard wire, then all this can be wiped with a soft cloth moistened with detergent.

Next, remove all the parts that we can remove with our hands without the help of a tool. We remove the sprinkler bar, take out the debris filter, unscrew the lid over the salt container. You can quickly clean the filter of the machine from grease, and small debris, if you put the filter in the sink, apply any “Anti-grease” agent to it.

The flat surfaces of the dishwasher are also wiped with a cloth with detergent, try not to use powders, because they can leave a mark on the surface. I wash the dishwasher from grease. If the layer of fat is no longer small, then moisten the entire surface with detergent and leave for a while, then this layer can be easily removed.

We put all the removed parts in the sink. In warm water with a detergent, we wash them well, especially carefully it is necessary to clean the mesh located inside the filter. Then lay them aside on a dry paper towel.

In the meantime, you yourself can continue to deal with the internal surfaces of the machine, which were previously well rubbed with detergent. After removing all the dirt and wiping, you can reinstall the removed parts.

We also clean, rinse and wipe the dish baskets and put them in place. We open the tap, and connect the machine to the network. It is difficult to say how long such a cleaning can take, a lot depends on the degree of contamination, on your quickness, and of course on the quality of the products that you will use.

Washing the exterior surfaces of the dishwasher

The kitchen is the kitchen, and no matter how neat the housewife you are, greasy traces can remain on any surface. Of course, its appearance does not affect the operation of the machine, but it is still better that the machine is clean both outside and inside. Therefore, to maintain our image, we proceed to the external cleaning of the dishwasher.

Here, of course, everything is much simpler, and the time you spend on it directly depends on how often you do it. Basically, a dry and soft cloth and window cleaner are enough. Apply the product to the control panel and the front and sides of the machine and wipe. If the car is already a little dirty, then for a start it is worth applying a stronger degreaser for 15 minutes, and then use glass cleaner.

There is one important point, do not use Pemolux type powders to clean the outside of the machine - over time, a cobweb from the abrasive may appear.

This terrible mold

Unfortunately, mold can grow in an appliance such as a dishwasher. This is facilitated by heat and moisture, as well as food debris. Most often, it appears in those who use the car often, but there is no time to look inside, as usual.

In order to prevent mold from appearing inside the machine, you need to open the lid from time to time and ventilate the equipment.

How terrible is this enemy? If the situation is not too badly neglected, then the mold removal operation will not take much time and you will not need to buy expensive products. It is enough to visit the nearest pharmacy and purchase "Hydrogen Peroxide". Briefly, mold removal steps:

• Peroxide should be in sufficient quantity, so buy either one large or several small bottles.
• Wet a rag with peroxide, and rub it well on all areas where there is mold, while covering twice the area than the size of the mold stain. Leave in this state for at least 2 hours.
• Then, we put on rubber gloves, take a rag again, soak it in "Whiteness", and wipe the same places.
• We leave for 2 hours.

Wash the entire inside of the machine with warm water, do not spare the water. As you can see, this operation can take you almost half a day, but you can do it at home in parallel with cleaning the dishwasher - and other things.

There is another problem that you may have to deal with from time to time - this is scale on heating elements. In some areas, this problem does not manifest itself, for one simple reason - the water in the pipes is soft, in which case scale does not form.

But basically the water is still hard, so get ready for the fact that you have to clean the heating elements. Do not trust advertising that some water softeners will get rid of scale. Scale will definitely appear if the heating element is not cleaned.

In principle, the fight against scale is simple, we will clean it with citric acid. All you need is a few packs of citric acid. It is poured into the tray and the washing mode is turned on, if there is a little scale, then one time will be enough. Household appliances need to be looked after - only in this case it will work for a long time and in good faith.

From time to time your dishwasher needs a general cleaning. This can be done once every 2-3 months, at least once every six months. Well proven dishwasher cleaner Finish. Finish car cleaner is sold in this package.

And this is how it fits into the dishwasher. We select the mode with water heating - 65 degrees, and turn on the machine without dishes.

On the video: dishwasher care - cleaning the bosch dishwasher.

No dishwasher, no hands. Now women can manage the time that used to be spent on washing by hand and wiping the kitchen utensils dry in a different way. Many housewives can no longer imagine their lives without a dishwasher. It is enough just to load the plates and cutlery, start the technique in one mode or another and after 20-30 minutes get out the spotlessly clean and sparkling dishes.

But in order for the dishwasher to serve faithfully for many years, it is necessary to take care of it regularly. Let's talk about how to clean the dishwasher and how to choose the best tool.

Why do kitchen appliances require special care?

If on the outside, putting things in order does not raise questions, then cleaning the internal elements can be confusing. It is not difficult to guess why food residues, lime and fatty deposits must be removed:

1. Firstly, it is a breeding ground for harmful bacteria and unpleasant odors.
2. Secondly, regular cleaning will extend the life of kitchen appliances.

But for those who are faced with this procedure for the first time, it may seem that it is easier to unload a coal car than to clean a dishwasher. In fact, everything is not so difficult if you know the basic rules of preventive care for her. Next, a whole range of procedures will be presented, after which you can declare the ideal cleanliness of the dishwasher.

How to clean inside, where to start?

To begin with, you should pay attention to the general points regarding the regular care of the kitchen "assistant":

1. After the next use, the dishwasher must be left open. This is necessary for the weathering of moisture residues, which are the optimal breeding ground for bacteria.
2. Careful care requires internal compartments and baskets. After each wash, they must be wiped dry.
3. Cleaning the baskets by hand is the only effective way to remove dirt, as opposed to a normal program rinse.
4. Before placing dishes in the machine, it is necessary to carefully collect all food residues.
5. In the process of cleaning the dishwasher, you should try to get into everything, even hard-to-reach places. It is impossible to fully rely on detergent compositions - they are not always effective.
6. You should not save on buying tablets and liquids for dishwashers. How to clean the device without special tools? This is almost impossible if you want to get rid of fat and dirty plaque. Although there is one good tool, but about it a little later.
7. Pay attention to those placed on the doors. There is a lot of dirt in this area.
8. It is important to remove the fat layer in time. It heats up and forms a film, which, with prolonged exposure, can even eat into metal surfaces.

What should always be done?

As a rule, the dishwasher is operated every day. After each cycle of use, internal products must be rinsed from food waste. You should not spare time for this procedure: it is important to carefully go through all areas, process all holes and recesses. Note to housewives: most often the sprinkler is clogged with food. If, after looking into the car after washing, you find particles of waste on it, do not put off the matter indefinitely, immediately eliminate them. Before cleaning the dishwasher at home, in particular the sprinkler, be sure to unplug the appliance from the mains. For convenience, use tweezers or long tongs - with their help it is much easier to remove leftover food.

Having started general cleaning at home, you will also have to clean the dishwasher. How to do this qualitatively, the step-by-step instructions below will tell you. By following the recommendations, you can tidy up your indispensable assistant in the kitchen in half an hour.

Washing the strainer

This part must be washed periodically, but at least once a week. The filter constantly accumulates grease, plaque and dirt. Debris clogs small holes, which leads to an unpleasant smell from the machine, and after a while this can cause a leak. First you need to carefully remove the lower basket and disassemble it - this is the only way to remove the filter. It is enough to wash the part under the pressure of water with ordinary dishes. After wiping with a dry towel, install back.

Blade cleaning

The next stage is the processing of the blades or, as they are also called, rocker arms. Clean parts as they get dirty. Most often, these parts are clogged with scale. It is especially important to clean all the small holes on them - it is more convenient to use a toothpick. After installing the blades in place, check if they work normally - the rocker arms should rotate freely.

Seal processing

Often it is not necessary to manipulate rubber gaskets. A regular visual inspection and cleaning once every six months is sufficient. In the instructions for dishwashers, sometimes there are manufacturer's recommendations on choosing the right product. They share tips on processing the door seal and the hostess. According to reviews, it is convenient for many to do this with an old toothbrush - it easily penetrates into the space between the pads. But the recommendations for the use of citric acid are not necessary. The fact is that this substance negatively affects rubber. Under the influence of aggressive acid, the material loses its elasticity and tightness.

What else needs to be cleaned up?

Plastic baskets are easily cleaned with dishwashing detergent, but many people forget about the need to wash the so-called “dead zone”. It is located at the bottom of the car, in the door. Despite the fact that water does not enter there, dirt and various deposits accumulate in just a few uses.

What products are intended for washing dishwashers?

Regardless of the dimensions (45 or 60 cm), dishwashers have almost the same device. Once you have finished cleaning hard-to-reach surfaces, you can move on to removing grease, rust, and mold.

At this stage, it is important not to make a mistake with the dishwasher cleaning liquid. So, in order to get rid of a specific pollution, you should choose the right tool:

1. Mold. To remove it, you need to use bleach. The exception is the presence of stainless steel parts in the machine. Any chlorine-containing compounds may be hazardous to this metal. To prevent the appearance of fungi, it is necessary to leave the car door open after washing.
2. Rust. Eliminating corrosion is not easy. But even if you manage to find a suitable remedy, this will not give any guarantee that rust will not appear again. The first signs of corrosion processes: swelling of the top layer of paint and peeling. Installing a dishwasher water filter will help prevent rust.
3. Scale. The easiest way to get rid of hard limescale is to buy Finish tablets. The tool can be used both in the presence of existing scale, and for preventive purposes. Cheaper analogues of Finish tablets are Somat, Topper and a product from the Amway line.

Do-it-yourself cleaner

According to reviews, many users recommend using citric acid to clean the dishwasher at home. As already noted, this component can harm the condition of rubber seals. A relatively safe alternative would be a solution of soda and vinegar. You can prepare it yourself as follows:

1. In a ratio of 1:13, take table 5% vinegar and boiled water. That is, for 1 tablespoon of essence, use 13 tbsp. l. water.
2. Next, you need to add baking soda - approximately 50-60 grams.
3. The composition is thoroughly mixed, soda should “hiss” a little.
4. Then the glass with the resulting liquid is sent to the dishwasher 60 cm or 45 cm - it does not matter.
5. The “assistant” is launched in the usual program, but without dishes and cutlery.
6. At the end of the operation of the unit, wipe the inner chamber with a clean cloth. After the procedure, no contamination should remain.

Regular cleaning is not necessary. It is enough to carry out the procedure once every 2-3 months. And in order to minimize stone deposits, use salt - it affects the chemical composition of water, making it softer.

At first glance, it may seem that there is not the slightest need for special care for kitchen appliances. Dishwashers of all brands and models look clean and fresh for a long time. But during daily operation, all working parts become contaminated with food waste, sediment from hard water and detergents, scale and grease build up, which subsequently leads to breakdowns and inefficient operation of equipment. At a minimum, the use of "Finish" to clean the dishwasher will increase its service life.

The appearance of an unpleasant odor when the door is open serves as a signal of the failure of the main "assistant" in the kitchen. Do not wait for the sad consequences, clean the dishwasher as soon as possible.

Part 3

Wipe down the exterior walls of the dishwasher and the door seal. The dishwasher door seal gets dirty very often. Dampen a rag with distilled white vinegar and run it over the soft white plastic on the door seal. Inspect the insulation and make sure you have removed all dirt and food particles. Wipe the outside of the dishwasher with the same cloth.

Wash your dishwasher once a month with vinegar. Monthly cleaning will keep the inside of the dishwasher fresh and prevent bacterial growth. If you notice an unpleasant odor or your dishwasher stops working even after you clean it, take it in for a checkup.

1. Use vinegar to clean the baskets and dishwasher spray. If you want to remove accumulated grease or food particles from the basket, wipe the basket with distilled white vinegar. Remove the spray arm from the dishwasher and soak it in distilled white vinegar. This will loosen the deposits of dirt and food particles, thereby improving the performance of the dishwasher.

   • The sprinkler sprays the dishes with water and is located at the bottom of the dishwasher.
   • Be sure to read the instructions for use before removing the sprinkler.
   • Before disconnecting the spray arm, unplug the dishwasher from the mains.

Similar rules are spelled out in the instructions or operating manual. They are designed for everyday use and are suitable for regular maintenance with some frequency. These rules include:

1. Regularly inspect the water supply hose for blockages and leaks.
2. Drying the door rubber seal at least once a month.
3. Correct stacking of dishes without overloading.
4. Preliminary cleaning of dishes from food residues.
5. Timely addition of washing and regenerating salts.

Inspection

It is always necessary to inspect the structure for dirt and blockages. Visual control should be carried out regularly, and as it gets dirty, you need to clean the dishwasher and the dirtiest structural elements. The sequence of parts inspection is as follows:

• nozzles on the spray arms, which often become clogged;
• joints and connections with the door where dirt accumulates;
• space under the door;
• baskets on which fat accumulates;
• mesh filter, the cells of which are clogged.

Cleaning frequency

The main structural elements are subject to certain contamination. They require special attention and need to be cleaned at different intervals. The desired frequency is indicated in the table.

Strainer

This is the part most vulnerable to dirt. The filter prevents food residues from entering the circulation pump. It is located at the bottom of the loading compartment next to the sprinkler. Comprises:

• honeycomb plate;
• external filter cup with fine-meshed walls;
• inner sleeve with the same wall structure.

With irregular and untimely cleaning, dirt will accumulate on the filter, an unpleasant odor will appear, there will be problems with water circulation, and the device will stop working. To prevent this, the filter must be disassembled, cleaned with a brush or toothpick and washed under running water. For more serious contamination, place the filter in a washing solution and clean it after soaking.

Spray arms

These elements are also sensitive to dirt. Plaque and food debris clog openings, contribute to the appearance of scale, interfere with the spraying of liquid in the compartment. All this negatively affects washing dishes. Despite the obvious ease of care, not everyone knows how to clean the rocker without compromising its performance.

When cleaning the nozzles, do not clog the clog inward, it must be removed outward with a toothpick or thin wire. Another option is to supply water under pressure from the back of the rocker.

External contamination is easily washed off under running water using detergents.

door seal

Plaque accumulates here, which can disrupt the tightness of the fit, cause the seal to leak. To clean it, it is better not to use citric acid. It will only exacerbate the problem. Use a standard cleaning compound by applying it to a rough cloth or regular toothbrush.

"Dead" space under the door

Another weak point is the lower part of the door on the inside. This space is not washed out during washing, but accumulates debris. It can be removed with a damp cloth.

Baskets

The problem of how to wash baskets is also often difficult. For a thorough cleaning, wiping with a dry cloth is not enough.

Baskets should be placed in the sink or tub, then applied with a sponge and left for 20 minutes. After that, it is necessary to thoroughly wash everything with a brush, rinse under running water and wipe dry. This will free the baskets of the inner compartment of the machine from grease and other dirt.

Elimination of defects

With untimely care, rust, mold, scale are formed on the listed nodes and mechanisms. They provoke odors, spoil the view, and can disable the device. Therefore, cleaning the dishwasher from these contaminants is very important.

Rust

Its occurrence on metal surfaces may be the result of exposure to water with an excessive amount of iron in the composition. Helps prevent corrosion coarse filter installed on the water supply hose. If rust has already appeared, it is necessary to apply a special composition to remove it.

Mold

Another result of improper use of the dishwasher. It can occur due to neglect of drying the internal space. The best way to prevent is to remove moisture residue with a dry cloth and ventilate the boot compartment with the door open.

Bleach is often used to clean mold, but be aware that its composition can be dangerous for stainless steel.

scale

One of the most common questions from users arises about cleaning the dishwasher from scale. Long-term operation of the apparatus with hot water inevitably leads to its appearance. Regenerating salt may slow down this process, but does not help to avoid it. To remove scale you will need:

1. Load special detergent into the detergent drawer.
2. Set the longest operating mode with the maximum temperature.
3. Run a car wash with an empty car.

It is important to choose the right cleaner. There are many such compositions on sale, but the most common is “ Finish". Its undesirable replacement with citric acid can ruin rubber gaskets.

A relatively safe and effective alternative is a mixture of water, vinegar, and table salt. The resulting solution in the beaker must be placed in the cup basket before starting the machine.

General cleaning

If users neglect regular cleaning of components and mechanisms, then it is imperative to carry out a general or general cleaning of the device.

Before proceeding to cleaning, it is necessary to completely de-energize the device and turn off the water supply. Next you need:

1. Remove all baskets from the compartment.
2. Place them in a bath with a solution of water and detergent for 20-30 minutes to soak.
3. Carefully clean filling valves.
4. Wash the joints of the door and the walls of the loading compartment using detergent, a rag, a toothbrush.
5. Wash the sprinkler with a trash filter.
6. Wash the walls of the inner compartment.
7. After cleaning is complete, return all components to their place.

Each model has its own design features that may require specific maintenance. Therefore, the best source for learning how to clean a dishwasher is the included instructions with instruction manuals.